[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-31-generic (buildd@allspice) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #62-Ubuntu SMP Tue Nov 8 14:20:11 UTC 2011 (Ubuntu 2.6.35-31.62-generic 2.6.35.13)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-31-generic root=UUID=d2099f44-9099-49c0-b8d0-d78fec9b3b16 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe81400 (usable)
[ 0.000000] BIOS-e820: 000000007fe81400 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7fe81 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fe81400 (usable)
[ 0.000000] modified: 000000007fe81400 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4007000 (reserved)
[ 0.000000] modified: 00000000f4008000 - 00000000f400c000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fe81000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fe81000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fe81000 @ 16000-1a000
[ 0.000000] RAMDISK: 36abe000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fc0c0 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 000000007fe8198a 00044 (v01 DELL M07 27D70403 ASL 00000061)
[ 0.000000] ACPI: FACP 000000007fe82800 00074 (v01 DELL M07 27D70403 ASL 00000061)
[ 0.000000] ACPI: DSDT 000000007fe83400 0519E (v01 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 000000007fe91c00 00040
[ 0.000000] ACPI: HPET 000000007fe82f00 00038 (v01 DELL M07 00000001 ASL 00000061)
[ 0.000000] ACPI: APIC 000000007fe83000 00068 (v01 DELL M07 27D70403 ASL 00000047)
[ 0.000000] ACPI: ASF! 000000007fe82c00 0005B (v16 DELL M07 27D70403 ASL 00000061)
[ 0.000000] ACPI: MCFG 000000007fe82fc0 0003E (v16 DELL M07 27D70403 ASL 00000061)
[ 0.000000] ACPI: SLIC 000000007fe8309c 00176 (v01 DELL M07 27D70403 ASL 00000061)
[ 0.000000] ACPI: TCPA 000000007fe83300 00032 (v01 DELL M07 27D70403 ASL 00000061)
[ 0.000000] ACPI: SSDT 000000007fe81a11 004DC (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fe81000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007fe81000
[ 0.000000] NODE_DATA [0000000001d64200 - 0000000001d691ff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002600000-ffff8800041fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fe81
[ 0.000000] On node 0 totalpages: 523792
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7107 pages used for memmap
[ 0.000000] DMA32 zone: 512702 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [18000 - 187ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s92160 r8192 d22528 u1048576
[ 0.000000] pcpu-alloc: s92160 r8192 d22528 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516629
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-31-generic root=UUID=d2099f44-9099-49c0-b8d0-d78fec9b3b16 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Subtract (43 early reservations)
[ 0.000000] #1 [0001000000 - 0001d63a74] TEXT DATA BSS
[ 0.000000] #2 [0036abe000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [000009f000 - 0000100000] BIOS reserved
[ 0.000000] #4 [0001d64000 - 0001d641ec] BRK
[ 0.000000] #5 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #6 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #7 [0000016000 - 0000018000] PGTABLE
[ 0.000000] #8 [0001d64200 - 0001d69200] NODE_DATA
[ 0.000000] #9 [0001d69200 - 0001d6a200] BOOTMEM
[ 0.000000] #10 [0001d63a80 - 0001d63c00] BOOTMEM
[ 0.000000] #11 [000256b000 - 000256c000] BOOTMEM
[ 0.000000] #12 [000256c000 - 000256d000] BOOTMEM
[ 0.000000] #13 [0002600000 - 0004200000] MEMMAP 0
[ 0.000000] #14 [0001d63c00 - 0001d63d80] BOOTMEM
[ 0.000000] #15 [0001d6a200 - 0001d76200] BOOTMEM
[ 0.000000] #16 [0001d77000 - 0001d78000] BOOTMEM
[ 0.000000] #17 [0001d63d80 - 0001d63dc1] BOOTMEM
[ 0.000000] #18 [0001d63e00 - 0001d63e43] BOOTMEM
[ 0.000000] #19 [0001d76200 - 0001d76468] BOOTMEM
[ 0.000000] #20 [0001d63e80 - 0001d63ee8] BOOTMEM
[ 0.000000] #21 [0001d63f00 - 0001d63f68] BOOTMEM
[ 0.000000] #22 [0001d63f80 - 0001d63fe8] BOOTMEM
[ 0.000000] #23 [0001d76480 - 0001d764e8] BOOTMEM
[ 0.000000] #24 [0001d76500 - 0001d76568] BOOTMEM
[ 0.000000] #25 [0001d76580 - 0001d765e8] BOOTMEM
[ 0.000000] #26 [0001d76600 - 0001d76668] BOOTMEM
[ 0.000000] #27 [0001d76680 - 0001d766e8] BOOTMEM
[ 0.000000] #28 [0001d76700 - 0001d76768] BOOTMEM
[ 0.000000] #29 [0001d76780 - 0001d767e8] BOOTMEM
[ 0.000000] #30 [0001d76800 - 0001d76820] BOOTMEM
[ 0.000000] #31 [0001d76840 - 0001d768aa] BOOTMEM
[ 0.000000] #32 [0001d768c0 - 0001d7692a] BOOTMEM
[ 0.000000] #33 [0001e00000 - 0001e1e000] BOOTMEM
[ 0.000000] #34 [0001f00000 - 0001f1e000] BOOTMEM
[ 0.000000] #35 [0001d76940 - 0001d76948] BOOTMEM
[ 0.000000] #36 [0001d76980 - 0001d76988] BOOTMEM
[ 0.000000] #37 [0001d769c0 - 0001d769c8] BOOTMEM
[ 0.000000] #38 [0001d76a00 - 0001d76a10] BOOTMEM
[ 0.000000] #39 [0001d76a40 - 0001d76b80] BOOTMEM
[ 0.000000] #40 [0001d76b80 - 0001d76be0] BOOTMEM
[ 0.000000] #41 [0001d76c00 - 0001d76c60] BOOTMEM
[ 0.000000] #42 [0001d78000 - 0001d80000] BOOTMEM
[ 0.000000] Memory: 2030688k/2095620k available (5726k kernel code, 452k absent, 64480k reserved, 5372k data, 912k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 20971520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.229 MHz processor.
[ 0.010013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.45 BogoMIPS (lpj=19952290)
[ 0.010018] pid_max: default: 32768 minimum: 301
[ 0.010049] Security Framework initialized
[ 0.010074] AppArmor: AppArmor initialized
[ 0.010075] Yama: becoming mindful.
[ 0.010380] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011838] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.012638] Mount-cache hash table entries: 256
[ 0.012812] Initializing cgroup subsys ns
[ 0.012818] Initializing cgroup subsys cpuacct
[ 0.012823] Initializing cgroup subsys memory
[ 0.012834] Initializing cgroup subsys devices
[ 0.012838] Initializing cgroup subsys freezer
[ 0.012840] Initializing cgroup subsys net_cls
[ 0.012876] CPU: Physical Processor ID: 0
[ 0.012878] CPU: Processor Core ID: 0
[ 0.012881] mce: CPU supports 6 MCE banks
[ 0.012891] CPU0: Thermal monitoring enabled (TM2)
[ 0.012897] using mwait in idle threads.
[ 0.012899] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.012906] PEBS disabled due to CPU errata.
[ 0.012911] ... version: 2
[ 0.012913] ... bit width: 40
[ 0.012915] ... generic registers: 2
[ 0.012917] ... value mask: 000000ffffffffff
[ 0.012919] ... max period: 000000007fffffff
[ 0.012921] ... fixed-purpose events: 3
[ 0.012923] ... event mask: 0000000700000003
[ 0.020025] ACPI: Core revision 20100428
[ 0.027183] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.027190] ftrace: allocating 22699 entries in 90 pages
[ 0.030066] Setting APIC routing to flat
[ 0.030448] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.139625] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 0.140000] Booting Node 0, Processors #1 Ok.
[ 0.300000] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.300000] Measured 4883967228 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.300000] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.300021] Brought up 2 CPUs
[ 0.300024] Total of 2 processors activated (7980.48 BogoMIPS).
[ 0.301366] devtmpfs: initialized
[ 0.301366] regulator: core version 0.5
[ 0.301366] Time: 10:09:06 Date: 12/05/11
[ 0.301366] NET: Registered protocol family 16
[ 0.301366] Trying to unpack rootfs image as initramfs...
[ 0.301366] ACPI: bus type pci registered
[ 0.301366] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.301366] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.307431] PCI: Using configuration type 1 for base access
[ 0.320157] bio: create slab <bio-0> at 0
[ 0.321385] ACPI: EC: Look up EC in DSDT
[ 0.332028] ACPI Warning: Incorrect checksum in table [TCPA] - 0x00, should be 0xA9 (20100428/tbutils-314)
[ 0.332036] ACPI: SSDT 000000007fe819ce 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
[ 0.332351] ACPI: Dynamic OEM Table Load:
[ 0.332354] ACPI: SSDT (null) 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
[ 0.342814] ACPI: SSDT 000000007fe82138 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.342814] ACPI: Dynamic OEM Table Load:
[ 0.342814] ACPI: SSDT (null) 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.342814] ACPI: SSDT 000000007fe81eed 001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.342814] ACPI: Dynamic OEM Table Load:
[ 0.342814] ACPI: SSDT (null) 001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.342814] ACPI: SSDT 000000007fe8237c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.342814] ACPI: Dynamic OEM Table Load:
[ 0.342814] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.342814] ACPI: SSDT 000000007fe820b3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.342814] ACPI: Dynamic OEM Table Load:
[ 0.342814] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.342814] ACPI: Interpreter enabled
[ 0.342814] ACPI: (supports S0 S3 S4 S5)
[ 0.342814] ACPI: Using IOAPIC for interrupt routing
[ 0.402487] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.402493] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.414267] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.437741] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.437746] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.437749] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.437752] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.437755] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xefffffff] (ignored)
[ 0.437758] pci_root PNP0A03:00: host bridge window [mem 0xf4007000-0xf4007fff] (ignored)
[ 0.437760] pci_root PNP0A03:00: host bridge window [mem 0xf400c000-0xfebfffff] (ignored)
[ 0.437763] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored)
[ 0.437766] pci_root PNP0A03:00: host bridge window [mem 0xfed00400-0xfed1ffff] (ignored)
[ 0.437768] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[ 0.437771] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xffafffff] (ignored)
[ 0.437876] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.437880] pci 0000:00:01.0: PME# disabled
[ 0.437964] pci 0000:00:1b.0: reg 10: [mem 0xefffc000-0xefffffff 64bit]
[ 0.438027] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.438032] pci 0000:00:1b.0: PME# disabled
[ 0.438134] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.438139] pci 0000:00:1c.0: PME# disabled
[ 0.438251] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.438256] pci 0000:00:1c.1: PME# disabled
[ 0.438360] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.438365] pci 0000:00:1c.2: PME# disabled
[ 0.438435] pci 0000:00:1d.0: reg 20: [io 0xbf80-0xbf9f]
[ 0.438500] pci 0000:00:1d.1: reg 20: [io 0xbf60-0xbf7f]
[ 0.438569] pci 0000:00:1d.2: reg 20: [io 0xbf40-0xbf5f]
[ 0.438635] pci 0000:00:1d.3: reg 20: [io 0xbf20-0xbf3f]
[ 0.438697] pci 0000:00:1d.7: reg 10: [mem 0xffa80000-0xffa803ff]
[ 0.438762] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.438768] pci 0000:00:1d.7: PME# disabled
[ 0.438947] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.438954] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
[ 0.438959] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[ 0.438965] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[ 0.439031] pci 0000:00:1f.2: reg 10: [io 0x01f0-0x01f7]
[ 0.439039] pci 0000:00:1f.2: reg 14: [io 0x03f4-0x03f7]
[ 0.439047] pci 0000:00:1f.2: reg 18: [io 0x0170-0x0177]
[ 0.439055] pci 0000:00:1f.2: reg 1c: [io 0x0374-0x0377]
[ 0.439063] pci 0000:00:1f.2: reg 20: [io 0xbfa0-0xbfaf]
[ 0.439100] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.439105] pci 0000:00:1f.2: PME# disabled
[ 0.439168] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df]
[ 0.439258] pci 0000:01:00.0: reg 10: [mem 0xed000000-0xedffffff]
[ 0.439267] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.439277] pci 0000:01:00.0: reg 1c: [mem 0xee000000-0xeeffffff 64bit]
[ 0.439287] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.439318] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.439327] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.439332] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.439336] pci 0000:00:01.0: bridge window [mem 0xed000000-0xefefffff]
[ 0.439341] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.439403] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 0.439409] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.439414] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.439423] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.439625] pci 0000:0c:00.0: reg 10: [mem 0xecfff000-0xecffffff]
[ 0.439871] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.439885] pci 0000:0c:00.0: PME# disabled
[ 0.439956] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.439984] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 0.439989] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.440005] pci 0000:00:1c.1: bridge window [mem 0xecf00000-0xecffffff]
[ 0.440013] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.440166] pci 0000:09:00.0: reg 10: [mem 0xecef0000-0xecefffff 64bit]
[ 0.440267] pci 0000:09:00.0: PME# supported from D3hot D3cold
[ 0.440273] pci 0000:09:00.0: PME# disabled
[ 0.440296] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.440309] pci 0000:00:1c.2: PCI bridge to [bus 09-09]
[ 0.440314] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.440319] pci 0000:00:1c.2: bridge window [mem 0xece00000-0xecefffff]
[ 0.440328] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.440399] pci 0000:03:01.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.440429] pci 0000:03:01.0: supports D1 D2
[ 0.440431] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.440437] pci 0000:03:01.0: PME# disabled
[ 0.440505] pci 0000:00:1e.0: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.440510] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.440515] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.440524] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.440527] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.440529] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
[ 0.440584] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:03 [bus 03-04]
[ 0.440624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.440920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.440991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.441095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.441174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.441249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT]
[ 0.454240] ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11)
[ 0.454368] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
[ 0.454496] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
[ 0.454605] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
[ 0.454730] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.454856] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.454983] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.455109] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.455170] HEST: Table is not found!
[ 0.455278] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.455283] vgaarb: loaded
[ 0.455448] SCSI subsystem initialized
[ 0.455572] libata version 3.00 loaded.
[ 0.455634] usbcore: registered new interface driver usbfs
[ 0.455646] usbcore: registered new interface driver hub
[ 0.455673] usbcore: registered new device driver usb
[ 0.455917] ACPI: WMI: Mapper loaded
[ 0.455920] PCI: Using ACPI for IRQ routing
[ 0.455924] PCI: pci_cache_line_size set to 64 bytes
[ 0.456031] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.456035] reserve RAM buffer: 000000007fe81400 - 000000007fffffff
[ 0.456139] NetLabel: Initializing
[ 0.456141] NetLabel: domain hash size = 128
[ 0.456143] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.456161] NetLabel: unlabeled traffic allowed by default
[ 0.456194] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.456201] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.456206] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.460046] Switching to clocksource hpet
[ 0.471339] AppArmor: AppArmor Filesystem Enabled
[ 0.471363] pnp: PnP ACPI init
[ 0.471386] ACPI: bus type pnp registered
[ 0.501025] pnp 00:02: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.501030] pnp 00:02: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.501114] pnp 00:03: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.501118] pnp 00:03: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.501121] pnp 00:03: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.501125] pnp 00:03: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.521722] pnp: PnP ACPI: found 14 devices
[ 0.521725] ACPI: ACPI bus type pnp unregistered
[ 0.521741] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
[ 0.521744] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
[ 0.521748] system 00:00: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.521750] system 00:00: [mem 0x000e0000-0x000fffff] has been reserved
[ 0.521754] system 00:00: [mem 0x00100000-0x7fe813ff] could not be reserved
[ 0.521756] system 00:00: [mem 0x7fe81400-0x7fefffff] has been reserved
[ 0.521759] system 00:00: [mem 0x7ff00000-0x7fffffff] has been reserved
[ 0.521763] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
[ 0.521766] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.521768] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.521771] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.521774] system 00:00: [mem 0xfed45000-0xfed9ffff] has been reserved
[ 0.521777] system 00:00: [mem 0xffa80000-0xffa83fff] could not be reserved
[ 0.521780] system 00:00: [mem 0xf4000000-0xf4003fff] has been reserved
[ 0.521783] system 00:00: [mem 0xf4004000-0xf4004fff] has been reserved
[ 0.521786] system 00:00: [mem 0xf4005000-0xf4005fff] has been reserved
[ 0.521789] system 00:00: [mem 0xf4006000-0xf4006fff] has been reserved
[ 0.521791] system 00:00: [mem 0xf4008000-0xf400bfff] has been reserved
[ 0.521794] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.521802] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.521809] system 00:03: [io 0xf400-0xf4fe] has been reserved
[ 0.521812] system 00:03: [io 0x1080-0x10bf] has been reserved
[ 0.521815] system 00:03: [io 0x10c0-0x10df] has been reserved
[ 0.521818] system 00:03: [io 0x0809] has been reserved
[ 0.521826] system 00:08: [io 0x0c80-0x0caf] has been reserved
[ 0.521829] system 00:08: [io 0x0cc0-0x0cff] could not be reserved
[ 0.521832] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.521834] system 00:08: [io 0x0920-0x092f] has been reserved
[ 0.521837] system 00:08: [io 0x0cbc-0x0cbf] has been reserved
[ 0.521840] system 00:08: [io 0x0930-0x097f] has been reserved
[ 0.521847] system 00:0b: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.521853] system 00:0d: [io 0x0cb0-0x0cbb] has been reserved
[ 0.521857] system 00:0d: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.528092] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.528096] pci 0000:00:1e.0: BAR 14: assigned [mem 0x84000000-0x89ffffff]
[ 0.528100] pci 0000:00:1c.0: BAR 14: assigned [mem 0x8a000000-0x8a1fffff]
[ 0.528103] pci 0000:00:1c.0: BAR 15: assigned [mem 0x8a200000-0x8a3fffff 64bit pref]
[ 0.528106] pci 0000:00:1c.1: BAR 15: assigned [mem 0x8a400000-0x8a5fffff 64bit pref]
[ 0.528109] pci 0000:00:1c.2: BAR 15: assigned [mem 0x8a600000-0x8a7fffff 64bit pref]
[ 0.528113] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.528116] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.528119] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.528122] pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.528126] pci 0000:01:00.0: BAR 6: assigned [mem 0xef000000-0xef01ffff pref]
[ 0.528129] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.528131] pci 0000:00:01.0: bridge window [io disabled]
[ 0.528136] pci 0000:00:01.0: bridge window [mem 0xed000000-0xefefffff]
[ 0.528139] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.528145] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 0.528148] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.528155] pci 0000:00:1c.0: bridge window [mem 0x8a000000-0x8a1fffff]
[ 0.528160] pci 0000:00:1c.0: bridge window [mem 0x8a200000-0x8a3fffff 64bit pref]
[ 0.528168] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 0.528172] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.528179] pci 0000:00:1c.1: bridge window [mem 0xecf00000-0xecffffff]
[ 0.528185] pci 0000:00:1c.1: bridge window [mem 0x8a400000-0x8a5fffff 64bit pref]
[ 0.528193] pci 0000:00:1c.2: PCI bridge to [bus 09-09]
[ 0.528197] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.528203] pci 0000:00:1c.2: bridge window [mem 0xece00000-0xecefffff]
[ 0.528208] pci 0000:00:1c.2: bridge window [mem 0x8a600000-0x8a7fffff 64bit pref]
[ 0.528218] pci 0000:03:01.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.528221] pci 0000:03:01.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
[ 0.528223] pci 0000:03:01.0: BAR 0: assigned [mem 0x88000000-0x88000fff]
[ 0.528230] pci 0000:03:01.0: BAR 0: set to [mem 0x88000000-0x88000fff] (PCI address [0x88000000-0x88000fff]
[ 0.528233] pci 0000:03:01.0: BAR 13: assigned [io 0x5000-0x50ff]
[ 0.528236] pci 0000:03:01.0: BAR 14: assigned [io 0x5400-0x54ff]
[ 0.528238] pci 0000:03:01.0: CardBus bridge to [bus 04-07]
[ 0.528241] pci 0000:03:01.0: bridge window [io 0x5000-0x50ff]
[ 0.528247] pci 0000:03:01.0: bridge window [io 0x5400-0x54ff]
[ 0.528253] pci 0000:03:01.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.528259] pci 0000:03:01.0: bridge window [mem 0x84000000-0x87ffffff]
[ 0.528265] pci 0000:00:1e.0: PCI bridge to [bus 03-04]
[ 0.528268] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
[ 0.528275] pci 0000:00:1e.0: bridge window [mem 0x84000000-0x89ffffff]
[ 0.528280] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.528300] alloc irq_desc for 16 on node -1
[ 0.528302] alloc kstat_irqs on node -1
[ 0.528310] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.528315] pci 0000:00:01.0: setting latency timer to 64
[ 0.528325] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.528331] pci 0000:00:1c.0: setting latency timer to 64
[ 0.528342] alloc irq_desc for 17 on node -1
[ 0.528344] alloc kstat_irqs on node -1
[ 0.528348] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.528354] pci 0000:00:1c.1: setting latency timer to 64
[ 0.528365] alloc irq_desc for 18 on node -1
[ 0.528366] alloc kstat_irqs on node -1
[ 0.528370] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.528375] pci 0000:00:1c.2: setting latency timer to 64
[ 0.528384] pci 0000:00:1e.0: setting latency timer to 64
[ 0.528396] pci 0000:03:01.0: enabling device (0000 -> 0003)
[ 0.528401] pci 0000:03:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.528410] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.528413] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.528415] pci_bus 0000:01: resource 1 [mem 0xed000000-0xefefffff]
[ 0.528418] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.528420] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[ 0.528423] pci_bus 0000:0b: resource 1 [mem 0x8a000000-0x8a1fffff]
[ 0.528425] pci_bus 0000:0b: resource 2 [mem 0x8a200000-0x8a3fffff 64bit pref]
[ 0.528428] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff]
[ 0.528430] pci_bus 0000:0c: resource 1 [mem 0xecf00000-0xecffffff]
[ 0.528433] pci_bus 0000:0c: resource 2 [mem 0x8a400000-0x8a5fffff 64bit pref]
[ 0.528435] pci_bus 0000:09: resource 0 [io 0x4000-0x4fff]
[ 0.528437] pci_bus 0000:09: resource 1 [mem 0xece00000-0xecefffff]
[ 0.528440] pci_bus 0000:09: resource 2 [mem 0x8a600000-0x8a7fffff 64bit pref]
[ 0.528442] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.528444] pci_bus 0000:03: resource 1 [mem 0x84000000-0x89ffffff]
[ 0.528447] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.528449] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.528452] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffffffffffff]
[ 0.528454] pci_bus 0000:04: resource 0 [io 0x5000-0x50ff]
[ 0.528456] pci_bus 0000:04: resource 1 [io 0x5400-0x54ff]
[ 0.528459] pci_bus 0000:04: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.528461] pci_bus 0000:04: resource 3 [mem 0x84000000-0x87ffffff]
[ 0.528509] NET: Registered protocol family 2
[ 0.528646] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.529535] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.532273] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.533072] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.533075] TCP reno registered
[ 0.533089] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.533125] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.533282] NET: Registered protocol family 1
[ 0.533451] pci 0000:01:00.0: Boot video device
[ 0.533471] PCI: CLS 64 bytes, default 64
[ 0.533725] Scanning for low memory corruption every 60 seconds
[ 0.533924] audit: initializing netlink socket (disabled)
[ 0.533937] type=2000 audit(1323079745.530:1): initialized
[ 0.549403] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.550966] VFS: Disk quotas dquot_6.5.2
[ 0.551027] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.551664] fuse init (API version 7.14)
[ 0.551752] msgmni has been set to 3966
[ 0.791736] Freeing initrd memory: 21704k freed
[ 0.806718] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.806723] io scheduler noop registered
[ 0.806725] io scheduler deadline registered
[ 0.806769] io scheduler cfq registered (default)
[ 0.806893] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.806923] alloc irq_desc for 40 on node -1
[ 0.806925] alloc kstat_irqs on node -1
[ 0.806939] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.807013] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.807059] alloc irq_desc for 41 on node -1
[ 0.807061] alloc kstat_irqs on node -1
[ 0.807070] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.807171] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.807218] alloc irq_desc for 42 on node -1
[ 0.807220] alloc kstat_irqs on node -1
[ 0.807229] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.807332] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.807378] alloc irq_desc for 43 on node -1
[ 0.807380] alloc kstat_irqs on node -1
[ 0.807389] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.807504] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.807607] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.808086] vesafb: framebuffer at 0xd0300000, mapped to 0xffffc90004980000, using 3072k, total 3072k
[ 0.808090] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.808092] vesafb: scrolling: redraw
[ 0.808094] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.855807] Console: switching to colour frame buffer device 128x48
[ 0.903402] fb0: VESA VGA frame buffer device
[ 0.903415] intel_idle: MWAIT substates: 0x22220
[ 0.903417] intel_idle: does not run on family 6 model 15
[ 0.903977] ACPI: AC Adapter [AC] (on-line)
[ 0.904091] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.904523] ACPI: Lid Switch [LID]
[ 0.904569] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.904575] ACPI: Power Button [PBTN]
[ 0.904623] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.904627] ACPI: Sleep Button [SBTN]
[ 0.904888] ACPI: acpi_idle registered with cpuidle
[ 0.926274] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.926282] ACPI: Thermal Zone [THM] (52 C)
[ 0.926385] ERST: Table is not found!
[ 0.947691] Linux agpgart interface v0.103
[ 0.947711] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.947714] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.947850] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.948690] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.951791] brd: module loaded
[ 0.952847] loop: module loaded
[ 0.953124] ata_piix 0000:00:1f.2: version 2.13
[ 0.953242] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.953249] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.953292] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.953475] scsi0 : ata_piix
[ 0.953553] scsi1 : ata_piix
[ 0.955449] ACPI: Battery Slot [BAT0] (battery present)
[ 0.957176] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 0.957179] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 0.957496] Fixed MDIO Bus: probed
[ 0.957528] PPP generic driver version 2.4.2
[ 0.957566] tun: Universal TUN/TAP device driver, 1.6
[ 0.957568] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.957657] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.957678] alloc irq_desc for 20 on node -1
[ 0.957680] alloc kstat_irqs on node -1
[ 0.957687] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.957699] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.957704] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.957739] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.957768] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.957780] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.961674] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.961693] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
[ 0.982516] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.982635] hub 1-0:1.0: USB hub found
[ 0.982641] hub 1-0:1.0: 8 ports detected
[ 0.982725] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.982738] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.982787] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.982794] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.982798] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.982836] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.982865] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
[ 0.982988] hub 2-0:1.0: USB hub found
[ 0.982993] hub 2-0:1.0: 2 ports detected
[ 0.983058] alloc irq_desc for 21 on node -1
[ 0.983060] alloc kstat_irqs on node -1
[ 0.983065] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.983072] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.983075] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.983113] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.983153] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
[ 0.983272] hub 3-0:1.0: USB hub found
[ 0.983277] hub 3-0:1.0: 2 ports detected
[ 0.983341] alloc irq_desc for 22 on node -1
[ 0.983343] alloc kstat_irqs on node -1
[ 0.983347] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.983354] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.983358] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.983390] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.983428] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
[ 0.983551] hub 4-0:1.0: USB hub found
[ 0.983556] hub 4-0:1.0: 2 ports detected
[ 0.983620] alloc irq_desc for 23 on node -1
[ 0.983623] alloc kstat_irqs on node -1
[ 0.983627] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.983634] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.983638] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.983670] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.983710] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
[ 0.983830] hub 5-0:1.0: USB hub found
[ 0.983835] hub 5-0:1.0: 2 ports detected
[ 0.983959] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.987020] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.987028] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.987117] mice: PS/2 mouse device common for all mice
[ 0.987258] rtc_cmos 00:06: RTC can wake from S4
[ 0.987293] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.987325] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.987422] device-mapper: uevent: version 1.0.3
[ 0.987510] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.987623] device-mapper: multipath: version 1.1.1 loaded
[ 0.987627] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.987949] cpuidle: using governor ladder
[ 0.988055] cpuidle: using governor menu
[ 0.988331] TCP cubic registered
[ 0.988457] NET: Registered protocol family 10
[ 0.988790] lo: Disabled Privacy Extensions
[ 0.989004] NET: Registered protocol family 17
[ 0.989935] PM: Resume from disk failed.
[ 0.989948] registered taskstats version 1
[ 0.990231] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.990330] Magic number: 7:88:173
[ 0.990352] pci_express 0000:00:1c.0:pcie01: hash matches
[ 0.990382] acpi device:36: hash matches
[ 0.990456] rtc_cmos 00:06: setting system clock to 2011-12-05 10:09:07 UTC (1323079747)
[ 0.990460] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.990461] EDD information not available.
[ 1.130422] ata2.00: ATAPI: SONY CD-RW/DVD-ROM CRX880A, KD09, max UDMA/33
[ 1.130868] ata1.00: ATA-8: HITACHI HTS725016A9A364, PCBZC70F, max UDMA/100
[ 1.130872] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 1.170483] ata2.00: configured for UDMA/33
[ 1.170635] ata1.00: configured for UDMA/100
[ 1.170792] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72501 PCBZ PQ: 0 ANSI: 5
[ 1.170925] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.171022] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.171152] sd 0:0:0:0: [sda] Write Protect is off
[ 1.171155] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.171207] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.171573] sda:
[ 1.172797] scsi 1:0:0:0: CD-ROM SONY CDRWDVD CRX880A KD09 PQ: 0 ANSI: 5
[ 1.177679] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.177683] Uniform CD-ROM driver Revision: 3.20
[ 1.177761] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.177807] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.193030] sda1 sda2 sda3 < sda5 >
[ 1.212004] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.212049] Freeing unused kernel memory: 912k freed
[ 1.212414] Write protecting the kernel read-only data: 10240k
[ 1.212637] Freeing unused kernel memory: 400k freed
[ 1.212961] Freeing unused kernel memory: 1640k freed
[ 1.231306] ramzswap: module is from the staging directory, the quality is unknown, you have been warned.
[ 1.231966] ramzswap: num_devices not specified. Using default: 1
[ 1.231969] ramzswap: Creating 1 devices ...
[ 1.236397] udev[86]: starting version 163
[ 1.300077] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.305070] tg3.c:v3.110 (April 9, 2010)
[ 1.305096] tg3 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.305108] tg3 0000:09:00.0: setting latency timer to 64
[ 1.345841] [drm] Initialized drm 1.1.0 20060810
[ 1.358009] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM5752KFBG) rev 6002] (PCI Express) MAC address 00:18:8b:cc:73:f7
[ 1.358015] tg3 0000:09:00.0: eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.358018] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.358022] tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.395162] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:20/LNXVIDEO:00/input/input4
[ 1.395224] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.395289] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 1.418529] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.418536] nouveau 0000:01:00.0: setting latency timer to 64
[ 1.422598] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x046700a3)
[ 1.422604] checking generic (d0300000 300000) vs hw (d0000000 10000000)
[ 1.422606] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 1.422629] Console: switching to colour dummy device 80x25
[ 1.425021] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 1.450827] hub 1-2:1.0: USB hub found
[ 1.450881] hub 1-2:1.0: 4 ports detected
[ 1.492869] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 1.492875] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 1.492878] [drm] nouveau 0000:01:00.0: Bios version 05.72.22.21
[ 1.492882] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[ 1.492885] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[ 1.492888] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 03000323 00000004
[ 1.492892] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01011300 00000028
[ 1.492894] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04022312 00000000
[ 1.492897] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020333f1 0020c070
[ 1.492900] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[ 1.492904] [drm] nouveau 0000:01:00.0: 0: 0x00000041: type 0x41 idx 0 tag 0xff
[ 1.492906] [drm] nouveau 0000:01:00.0: unknown type, using 0x30
[ 1.492909] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 1.492912] [drm] nouveau 0000:01:00.0: 2: 0x00000230: type 0x30 idx 2 tag 0xff
[ 1.492915] [drm] nouveau 0000:01:00.0: 3: 0x00000310: type 0x10 idx 3 tag 0xff
[ 1.492918] [drm] nouveau 0000:01:00.0: 4: 0x00000311: type 0x11 idx 4 tag 0xff
[ 1.492930] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF12D
[ 1.492969] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF42C
[ 1.672762] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF91E
[ 1.672785] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFA76
[ 1.692685] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFB44
[ 1.692693] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM
[ 1.707671] [TTM] Zone kernel: Available graphics memory: 1027672 kiB.
[ 1.707674] [TTM] Initializing pool allocator.
[ 1.709758] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[ 1.711027] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[ 1.712147] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[ 1.712154] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[ 1.712221] [drm] nouveau 0000:01:00.0: Detected a LVDS connector
[ 1.730133] usb 1-2.3: new full speed USB device using ehci_hcd and address 3
[ 1.816233] composite sync not supported
[ 1.816240] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 1.816270] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 1.816300] [drm] nouveau 0000:01:00.0: Detected a TV connector
[ 1.818075] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
[ 1.818080] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[ 1.818084] [drm] nouveau 0000:01:00.0: 0xE4B3: Parsing digital output script table
[ 1.843543] hub 1-2.3:1.0: USB hub found
[ 1.843754] hub 1-2.3:1.0: 3 ports detected
[ 2.080076] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[ 2.080081] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[ 2.080084] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[ 2.100642] composite sync not supported
[ 2.120146] usb 1-2.3.2: new full speed USB device using ehci_hcd and address 4
[ 2.223136] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x49000, bo ffff880037a38400
[ 2.233678] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[ 2.233681] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[ 2.233685] [drm] nouveau 0000:01:00.0: 0xE514: Parsing digital output script table
[ 2.410071] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
[ 2.410074] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[ 2.410077] [drm] nouveau 0000:01:00.0: 0xE4A4: Parsing digital output script table
[ 2.410085] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[ 2.410098] Console: switching to colour frame buffer device 160x50
[ 2.411294] fb0: nouveaufb frame buffer device
[ 2.411296] drm: registered panic notifier
[ 2.411300] Slow work thread pool: Starting up
[ 2.411426] Slow work thread pool: Ready
[ 2.411433] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 3.378774] Btrfs loaded
[ 3.383818] xor: automatically using best checksumming function: generic_sse
[ 3.432515] generic_sse: 7100.800 MB/sec
[ 3.432518] xor: using function: generic_sse (7100.800 MB/sec)
[ 3.435026] device-mapper: dm-raid45: initialized v0.2594b
[ 3.573735] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.885885] atkbd serio0: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0).
[ 4.885890] atkbd serio0: Use 'setkeycodes e006 <keycode>' to make it known.
[ 5.018630] atkbd serio0: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0).
[ 5.018638] atkbd serio0: Use 'setkeycodes e006 <keycode>' to make it known.
[ 5.171520] atkbd serio0: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0).
[ 5.171524] atkbd serio0: Use 'setkeycodes e006 <keycode>' to make it known.
[ 5.314694] atkbd serio0: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0).
[ 5.314701] atkbd serio0: Use 'setkeycodes e006 <keycode>' to make it known.
[ 5.436992] atkbd serio0: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0).
[ 5.436996] atkbd serio0: Use 'setkeycodes e006 <keycode>' to make it known.
[ 14.617322] udev[447]: starting version 163
[ 14.673206] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k
[ 14.673948] coretemp coretemp.0: TjMax is assumed as 100 C!
[ 14.674100] coretemp coretemp.1: TjMax is assumed as 100 C!
[ 14.795563] cfg80211: Calling CRDA to update world regulatory domain
[ 14.839450] intel_rng: FWH not detected
[ 14.862470] leds_ss4200: no LED devices found
[ 14.906561] lp: driver loaded but no devices found
[ 14.945208] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.958667] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01c2]
[ 14.958695] yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst
[ 14.976430] cfg80211: World regulatory domain updated:
[ 14.976433] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.976437] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.976440] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.976443] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.976445] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.976448] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.989422] input: Dell WMI hotkeys as /devices/virtual/input/input5
[ 15.035496] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 15.065128] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 15.065132] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 15.065225] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 15.065240] iwl3945 0000:0c:00.0: setting latency timer to 64
[ 15.119451] iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 15.119456] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 15.119571] alloc irq_desc for 44 on node -1
[ 15.119574] alloc kstat_irqs on node -1
[ 15.119609] iwl3945 0000:0c:00.0: irq 44 for MSI/MSI-X
[ 15.122015] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 18
[ 15.122019] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[ 15.122024] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 15.122034] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff]
[ 15.122037] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0x84000000-0x89ffffff]
[ 15.122041] pcmcia_socket pcmcia_socket0: cs: memory probe 0x84000000-0x89ffffff: excluding 0x84000000-0x881fffff
[ 15.122056] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[ 15.122058] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[ 15.159327] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 15.159401] alloc irq_desc for 45 on node -1
[ 15.159404] alloc kstat_irqs on node -1
[ 15.159419] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 15.159454] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.162467] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 15.232641] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 15.232705] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 15.232767] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 15.293204] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 15.293396] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 15.536313] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 15.584561] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input8
[ 15.607590] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input9
[ 15.639788] ppdev: user-space parallel port driver
[ 15.656638] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
[ 15.779368] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.781179] alloc irq_desc for 46 on node -1
[ 15.781183] alloc kstat_irqs on node -1
[ 15.781202] tg3 0000:09:00.0: irq 46 for MSI/MSI-X
[ 15.816786] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.917095] composite sync not supported
[ 16.047764] NMI watchdog is permanently disabled
[ 16.173227] composite sync not supported
[ 16.412280] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 16.413482] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 16.430201] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 16.431331] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 16.627612] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 16.632699] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 17.342354] composite sync not supported
[ 17.581801] composite sync not supported
[ 17.585032] composite sync not supported
[ 17.824135] composite sync not supported
[ 17.826923] composite sync not supported
[ 18.061663] composite sync not supported
[ 18.063924] composite sync not supported
[ 18.301641] composite sync not supported
[ 18.712074] NMI watchdog is permanently disabled
[ 19.261660] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.265060] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 20.850110] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 21.139097] usbcore: registered new interface driver hiddev
[ 21.154732] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input10
[ 21.154942] generic-usb 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 21.154985] usbcore: registered new interface driver usbhid
[ 21.154989] usbhid: USB HID core driver
[ 28.233872] composite sync not supported
[ 28.472113] composite sync not supported
[ 28.476287] composite sync not supported
[ 28.721603] composite sync not supported
[ 28.727441] composite sync not supported
[ 28.961833] composite sync not supported
[ 28.964187] composite sync not supported
[ 29.201685] composite sync not supported
[ 30.325660] [drm] nouveau 0000:01:00.0: Allocating FIFO number 3
[ 30.327074] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 3
[ 30.407683] composite sync not supported
[ 32.734644] wlan0: authenticate with 00:27:0d:55:d4:80 (try 1)
[ 32.736569] wlan0: authenticated
[ 32.740221] wlan0: associate with 00:27:0d:55:d4:80 (try 1)
[ 32.940036] wlan0: associate with 00:27:0d:55:d4:80 (try 2)
[ 32.947090] wlan0: RX AssocResp from 00:27:0d:55:d4:80 (capab=0x421 status=0 aid=62)
[ 32.947097] wlan0: associated
[ 32.949026] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 32.949090] cfg80211: Calling CRDA for country: BE
[ 32.953731] cfg80211: Disabling channel 5170 MHz on phy0 due to Country IE
[ 32.953737] cfg80211: Regulatory domain changed to country: BE
[ 32.953739] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 32.953742] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 32.953745] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 32.953748] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 32.953750] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 34.573448] composite sync not supported
[ 34.817803] composite sync not supported
[ 43.902540] wlan0: no IPv6 routers present
[ 56.735056] CE: hpet increased min_delta_ns to 7500 nsec
[ 58.779558] CE: hpet increased min_delta_ns to 11250 nsec
[ 400.777229] sr0: CDROM not ready. Make sure there is a disc in the drive.
[ 416.481933] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
[ 416.481941] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[ 416.481948] [drm] nouveau 0000:01:00.0: 0xE4B3: Parsing digital output script table
[ 416.760511] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[ 416.760519] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[ 416.760527] [drm] nouveau 0000:01:00.0: 0xE514: Parsing digital output script table
[ 416.940065] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
[ 416.940073] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[ 416.940079] [drm] nouveau 0000:01:00.0: 0xE4A4: Parsing digital output script table
[ 416.940093] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[ 416.971151] composite sync not supported
[ 417.016512] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
[ 417.016518] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[ 417.016522] [drm] nouveau 0000:01:00.0: 0xE4B3: Parsing digital output script table
[ 417.036977] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[ 417.036980] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[ 417.036984] [drm] nouveau 0000:01:00.0: 0xE514: Parsing digital output script table
[ 417.210063] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
[ 417.210071] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[ 417.210078] [drm] nouveau 0000:01:00.0: 0xE4A4: Parsing digital output script table
[ 417.210091] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[ 417.631994] composite sync not supported
[ 920.846018] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0)
[ 920.846026] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[ 920.846033] [drm] nouveau 0000:01:00.0: 0xE4B3: Parsing digital output script table
[ 921.130539] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[ 921.130546] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[ 921.130554] [drm] nouveau 0000:01:00.0: 0xE514: Parsing digital output script table
[ 921.310095] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0)
[ 921.310103] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[ 921.310109] [drm] nouveau 0000:01:00.0: 0xE4A4: Parsing digital output script table
[ 921.310123] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[ 921.347332] composite sync not supported