1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 2.6.31-15-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 (Ubuntu 2.6.31-15.50-generic)
  4. [ 0.000000] KERNEL supported cpus:
  5. [ 0.000000] Intel GenuineIntel
  6. [ 0.000000] AMD AuthenticAMD
  7. [ 0.000000] NSC Geode by NSC
  8. [ 0.000000] Cyrix CyrixInstead
  9. [ 0.000000] Centaur CentaurHauls
  10. [ 0.000000] Transmeta GenuineTMx86
  11. [ 0.000000] Transmeta TransmetaCPU
  12. [ 0.000000] UMC UMC UMC UMC
  13. [ 0.000000] BIOS-provided physical RAM map:
  14. [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  15. [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  16. [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  17. [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
  18. [ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data)
  19. [ 0.000000] BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS)
  20. [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  21. [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
  22. [ 0.000000] DMI 2.3 present.
  23. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
  24. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  25. [ 0.000000] last_pfn = 0x7ffd0 max_arch_pfn = 0x100000
  26. [ 0.000000] MTRR default type: uncachable
  27. [ 0.000000] MTRR fixed ranges enabled:
  28. [ 0.000000] 00000-9FFFF write-back
  29. [ 0.000000] A0000-DFFFF uncachable
  30. [ 0.000000] E0000-EFFFF write-through
  31. [ 0.000000] F0000-FFFFF write-protect
  32. [ 0.000000] MTRR variable ranges enabled:
  33. [ 0.000000] 0 base 000000000 mask F80000000 write-back
  34. [ 0.000000] 1 disabled
  35. [ 0.000000] 2 disabled
  36. [ 0.000000] 3 disabled
  37. [ 0.000000] 4 disabled
  38. [ 0.000000] 5 disabled
  39. [ 0.000000] 6 disabled
  40. [ 0.000000] 7 disabled
  41. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  42. [ 0.000000] Scanning 0 areas for low memory corruption
  43. [ 0.000000] modified physical RAM map:
  44. [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
  45. [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
  46. [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
  47. [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
  48. [ 0.000000] modified: 0000000000100000 - 000000007ffd0000 (usable)
  49. [ 0.000000] modified: 000000007ffd0000 - 000000007ffde000 (ACPI data)
  50. [ 0.000000] modified: 000000007ffde000 - 0000000080000000 (ACPI NVS)
  51. [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
  52. [ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved)
  53. [ 0.000000] initial memory mapped : 0 - 00c00000
  54. [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
  55. [ 0.000000] Using x86 segment limits to approximate NX protection
  56. [ 0.000000] 0000000000 - 0000400000 page 4k
  57. [ 0.000000] 0000400000 - 0037400000 page 2M
  58. [ 0.000000] 0037400000 - 00377fe000 page 4k
  59. [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
  60. [ 0.000000] RAMDISK: 37b09000 - 37fef3ad
  61. [ 0.000000] Allocated new RAMDISK: 008ad000 - 00d933ad
  62. [ 0.000000] Move RAMDISK from 0000000037b09000 - 0000000037fef3ac to 008ad000 - 00d933ac
  63. [ 0.000000] ACPI: RSDP 000faaa0 00024 (v02 ACPIAM)
  64. [ 0.000000] ACPI: XSDT 7ffd0100 00044 (v01 A M I OEMXSDT 08000617 MSFT 00000097)
  65. [ 0.000000] ACPI: FACP 7ffd0290 000F4 (v03 A M I OEMFACP 08000617 MSFT 00000097)
  66. [ 0.000000] ACPI: DSDT 7ffd0440 03DB5 (v01 A0259 A0259001 00000001 INTL 02002026)
  67. [ 0.000000] ACPI: FACS 7ffde000 00040
  68. [ 0.000000] ACPI: APIC 7ffd0390 00068 (v01 A M I OEMAPIC 08000617 MSFT 00000097)
  69. [ 0.000000] ACPI: MCFG 7ffd0400 0003C (v01 A M I OEMMCFG 08000617 MSFT 00000097)
  70. [ 0.000000] ACPI: OEMB 7ffde040 00046 (v01 A M I AMI_OEM 08000617 MSFT 00000097)
  71. [ 0.000000] ACPI: Local APIC address 0xfee00000
  72. [ 0.000000] 1159MB HIGHMEM available.
  73. [ 0.000000] 887MB LOWMEM available.
  74. [ 0.000000] mapped low ram: 0 - 377fe000
  75. [ 0.000000] low ram: 0 - 377fe000
  76. [ 0.000000] node 0 low ram: 00000000 - 377fe000
  77. [ 0.000000] node 0 bootmap 00011000 - 00017f00
  78. [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  79. [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
  80. [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
  81. [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
  82. [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
  83. [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
  84. [ 0.000000] #5 [00008a9000 - 00008ac234] BRK ==> [00008a9000 - 00008ac234]
  85. [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
  86. [ 0.000000] #7 [00008ad000 - 0000d933ad] NEW RAMDISK ==> [00008ad000 - 0000d933ad]
  87. [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
  88. [ 0.000000] found SMP MP-table at [c00ff780] ff780
  89. [ 0.000000] Zone PFN ranges:
  90. [ 0.000000] DMA 0x00000010 -> 0x00001000
  91. [ 0.000000] Normal 0x00001000 -> 0x000377fe
  92. [ 0.000000] HighMem 0x000377fe -> 0x0007ffd0
  93. [ 0.000000] Movable zone start PFN for each node
  94. [ 0.000000] early_node_map[2] active PFN ranges
  95. [ 0.000000] 0: 0x00000010 -> 0x0000009f
  96. [ 0.000000] 0: 0x00000100 -> 0x0007ffd0
  97. [ 0.000000] On node 0 totalpages: 524127
  98. [ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000200
  99. [ 0.000000] DMA zone: 32 pages used for memmap
  100. [ 0.000000] DMA zone: 0 pages reserved
  101. [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
  102. [ 0.000000] Normal zone: 1744 pages used for memmap
  103. [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
  104. [ 0.000000] HighMem zone: 2320 pages used for memmap
  105. [ 0.000000] HighMem zone: 294594 pages, LIFO batch:31
  106. [ 0.000000] Using APIC driver default
  107. [ 0.000000] ACPI: PM-Timer IO Port: 0x808
  108. [ 0.000000] ACPI: Local APIC address 0xfee00000
  109. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  110. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  111. [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  112. [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
  113. [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
  114. [ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
  115. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  116. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  117. [ 0.000000] ACPI: IRQ0 used by override.
  118. [ 0.000000] ACPI: IRQ2 used by override.
  119. [ 0.000000] ACPI: IRQ9 used by override.
  120. [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
  121. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  122. [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
  123. [ 0.000000] nr_irqs_gsi: 48
  124. [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  125. [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
  126. [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
  127. [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
  128. [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
  129. [ 0.000000] PERCPU: Embedded 14 pages at c200a000, static data 35612 bytes
  130. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520031
  131. [ 0.000000] Kernel command line: root=UUID=82e29357-9603-403e-86ed-b37dcc794d6b ro quiet splash
  132. [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
  133. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  134. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  135. [ 0.000000] Enabling fast FPU save and restore... done.
  136. [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
  137. [ 0.000000] Initializing CPU#0
  138. [ 0.000000] allocated 10484480 bytes of page_cgroup
  139. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  140. [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffd0)
  141. [ 0.000000] Memory: 2055108k/2096960k available (4566k kernel code, 40468k reserved, 2142k data, 540k init, 1187656k highmem)
  142. [ 0.000000] virtual kernel memory layout:
  143. [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
  144. [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
  145. [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
  146. [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
  147. [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
  148. [ 0.000000] .data : 0xc0575b44 - 0xc078d3c8 (2142 kB)
  149. [ 0.000000] .text : 0xc0100000 - 0xc0575b44 (4566 kB)
  150. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  151. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  152. [ 0.000000] NR_IRQS:2304 nr_irqs:512
  153. [ 0.000000] Extended CMOS year: 2000
  154. [ 0.000000] Fast TSC calibration using PIT
  155. [ 0.000000] Detected 3000.009 MHz processor.
  156. [ 0.001183] Console: colour VGA+ 80x25
  157. [ 0.001188] console [tty0] enabled
  158. [ 0.001243] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.01 BogoMIPS (lpj=12000036)
  159. [ 0.001268] Security Framework initialized
  160. [ 0.001291] AppArmor: AppArmor initialized
  161. [ 0.001301] Mount-cache hash table entries: 512
  162. [ 0.001460] Initializing cgroup subsys ns
  163. [ 0.001467] Initializing cgroup subsys cpuacct
  164. [ 0.001473] Initializing cgroup subsys memory
  165. [ 0.001482] Initializing cgroup subsys freezer
  166. [ 0.001485] Initializing cgroup subsys net_cls
  167. [ 0.001506] CPU: Trace cache: 12K uops, L1 D cache: 16K
  168. [ 0.001510] CPU: L2 cache: 1024K
  169. [ 0.001514] CPU: Physical Processor ID: 0
  170. [ 0.001516] CPU: Processor Core ID: 0
  171. [ 0.001521] mce: CPU supports 4 MCE banks
  172. [ 0.001535] CPU0: Thermal monitoring enabled (TM1)
  173. [ 0.001540] using mwait in idle threads.
  174. [ 0.001548] Performance Counters: no PMU driver, software counters only.
  175. [ 0.001557] Checking 'hlt' instruction... OK.
  176. [ 0.019461] ACPI: Core revision 20090521
  177. [ 0.029048] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  178. [ 0.068744] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
  179. [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
  180. [ 0.004000] Initializing CPU#1
  181. [ 0.004000] Calibrating delay using timer specific routine.. 6000.61 BogoMIPS (lpj=12001229)
  182. [ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K
  183. [ 0.004000] CPU: L2 cache: 1024K
  184. [ 0.004000] CPU: Physical Processor ID: 0
  185. [ 0.004000] CPU: Processor Core ID: 0
  186. [ 0.004000] mce: CPU supports 4 MCE banks
  187. [ 0.004000] CPU1: Thermal monitoring enabled (TM1)
  188. [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
  189. [ 0.156952] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
  190. [ 0.156977] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  191. [ 0.160026] Brought up 2 CPUs
  192. [ 0.160032] Total of 2 processors activated (12000.63 BogoMIPS).
  193. [ 0.160272] CPU0 attaching sched-domain:
  194. [ 0.160277] domain 0: span 0-1 level SIBLING
  195. [ 0.160281] groups: 0 1
  196. [ 0.160289] CPU1 attaching sched-domain:
  197. [ 0.160292] domain 0: span 0-1 level SIBLING
  198. [ 0.160296] groups: 1 0
  199. [ 0.160397] Booting paravirtualized kernel on bare hardware
  200. [ 0.160397] regulator: core version 0.5
  201. [ 0.160397] Time: 17:02:55 Date: 11/30/09
  202. [ 0.160397] NET: Registered protocol family 16
  203. [ 0.160397] EISA bus registered
  204. [ 0.160397] ACPI: bus type pci registered
  205. [ 0.160402] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
  206. [ 0.160407] PCI: Not using MMCONFIG.
  207. [ 0.160539] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=1
  208. [ 0.160542] PCI: Using configuration type 1 for base access
  209. [ 0.161985] bio: create slab <bio-0> at 0
  210. [ 0.164962] ACPI: EC: Look up EC in DSDT
  211. [ 0.174942] ACPI: Interpreter enabled
  212. [ 0.174953] ACPI: (supports S0 S1 S3 S4 S5)
  213. [ 0.174994] ACPI: Using IOAPIC for interrupt routing
  214. [ 0.175059] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
  215. [ 0.179919] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
  216. [ 0.179923] PCI: Using MMCONFIG for extended config space
  217. [ 0.190753] ACPI Warning: Incorrect checksum in table [OEMB] - 95, should be 66 20090521 tbutils-246
  218. [ 0.190931] ACPI: No dock devices found.
  219. [ 0.191100] ACPI: PCI Root Bridge [PCI0] (0000:00)
  220. [ 0.191169] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
  221. [ 0.191651] pci 0000:00:01.0: supports D1
  222. [ 0.191695] pci 0000:00:0a.0: reg 10 32bit mmio: [0xaffff000-0xafffffff]
  223. [ 0.191766] pci 0000:00:0a.1: reg 10 32bit mmio: [0xafffe000-0xafffefff]
  224. [ 0.191862] pci 0000:00:0b.0: reg 10 io port: [0xd800-0xd8ff]
  225. [ 0.191872] pci 0000:00:0b.0: reg 14 32bit mmio: [0xfbeffc00-0xfbeffcff]
  226. [ 0.191906] pci 0000:00:0b.0: reg 30 32bit mmio: [0xfbec0000-0xfbedffff]
  227. [ 0.191932] pci 0000:00:0b.0: supports D1 D2
  228. [ 0.191935] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold
  229. [ 0.191941] pci 0000:00:0b.0: PME# disabled
  230. [ 0.191993] pci 0000:00:0f.0: reg 10 io port: [0xdc00-0xdc07]
  231. [ 0.192011] pci 0000:00:0f.0: reg 14 io port: [0xd480-0xd483]
  232. [ 0.192021] pci 0000:00:0f.0: reg 18 io port: [0xd400-0xd407]
  233. [ 0.192031] pci 0000:00:0f.0: reg 1c io port: [0xd080-0xd083]
  234. [ 0.192040] pci 0000:00:0f.0: reg 20 io port: [0xd000-0xd00f]
  235. [ 0.192050] pci 0000:00:0f.0: reg 24 io port: [0xc800-0xc8ff]
  236. [ 0.192153] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
  237. [ 0.192270] pci 0000:00:10.0: reg 20 io port: [0xcc00-0xcc1f]
  238. [ 0.192307] pci 0000:00:10.0: supports D1 D2
  239. [ 0.192310] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
  240. [ 0.192316] pci 0000:00:10.0: PME# disabled
  241. [ 0.192385] pci 0000:00:10.1: reg 20 io port: [0xc480-0xc49f]
  242. [ 0.192422] pci 0000:00:10.1: supports D1 D2
  243. [ 0.192425] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
  244. [ 0.192431] pci 0000:00:10.1: PME# disabled
  245. [ 0.192499] pci 0000:00:10.2: reg 20 io port: [0xc400-0xc41f]
  246. [ 0.192536] pci 0000:00:10.2: supports D1 D2
  247. [ 0.192539] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
  248. [ 0.192545] pci 0000:00:10.2: PME# disabled
  249. [ 0.192617] pci 0000:00:10.3: reg 20 io port: [0xc080-0xc09f]
  250. [ 0.192655] pci 0000:00:10.3: supports D1 D2
  251. [ 0.192659] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
  252. [ 0.192665] pci 0000:00:10.3: PME# disabled
  253. [ 0.192710] pci 0000:00:10.4: reg 10 32bit mmio: [0xfbeff800-0xfbeff8ff]
  254. [ 0.192772] pci 0000:00:10.4: supports D1 D2
  255. [ 0.192774] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
  256. [ 0.192780] pci 0000:00:10.4: PME# disabled
  257. [ 0.192870] HPET not enabled in BIOS. You might try hpet=force boot option
  258. [ 0.192878] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
  259. [ 0.192954] pci 0000:00:11.5: reg 10 io port: [0xb800-0xb8ff]
  260. [ 0.193017] pci 0000:00:11.5: supports D1 D2
  261. [ 0.193063] pci 0000:00:11.6: reg 10 io port: [0x00-0xff]
  262. [ 0.193170] pci 0000:00:12.0: reg 10 io port: [0xb400-0xb4ff]
  263. [ 0.193180] pci 0000:00:12.0: reg 14 32bit mmio: [0xfbeff400-0xfbeff4ff]
  264. [ 0.193236] pci 0000:00:12.0: supports D1 D2
  265. [ 0.193239] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
  266. [ 0.193245] pci 0000:00:12.0: PME# disabled
  267. [ 0.193327] pci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff]
  268. [ 0.193336] pci 0000:01:00.0: reg 14 io port: [0xe800-0xe8ff]
  269. [ 0.193345] pci 0000:01:00.0: reg 18 32bit mmio: [0xfbff0000-0xfbffffff]
  270. [ 0.193369] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbfc0000-0xfbfdffff]
  271. [ 0.193398] pci 0000:01:00.0: supports D1 D2
  272. [ 0.193438] pci 0000:01:00.1: reg 10 32bit mmio: [0xb0000000-0xbfffffff]
  273. [ 0.193447] pci 0000:01:00.1: reg 14 32bit mmio: [0xfbfe0000-0xfbfeffff]
  274. [ 0.193494] pci 0000:01:00.1: supports D1 D2
  275. [ 0.193558] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
  276. [ 0.193564] pci 0000:00:01.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
  277. [ 0.193570] pci 0000:00:01.0: bridge 32bit mmio pref: [0xb0000000-0xcfffffff]
  278. [ 0.193583] pci_bus 0000:00: on NUMA node 0
  279. [ 0.193589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  280. [ 0.210682] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  281. [ 0.210827] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  282. [ 0.210967] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
  283. [ 0.211111] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  284. [ 0.211255] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  285. [ 0.211398] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  286. [ 0.211540] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  287. [ 0.211683] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  288. [ 0.211936] SCSI subsystem initialized
  289. [ 0.212035] libata version 3.00 loaded.
  290. [ 0.212111] usbcore: registered new interface driver usbfs
  291. [ 0.212111] usbcore: registered new interface driver hub
  292. [ 0.212111] usbcore: registered new device driver usb
  293. [ 0.212111] ACPI: WMI: Mapper loaded
  294. [ 0.212111] PCI: Using ACPI for IRQ routing
  295. [ 0.224013] Bluetooth: Core ver 2.15
  296. [ 0.224036] NET: Registered protocol family 31
  297. [ 0.224036] Bluetooth: HCI device and connection manager initialized
  298. [ 0.224036] Bluetooth: HCI socket layer initialized
  299. [ 0.224036] NetLabel: Initializing
  300. [ 0.224036] NetLabel: domain hash size = 128
  301. [ 0.224036] NetLabel: protocols = UNLABELED CIPSOv4
  302. [ 0.224056] NetLabel: unlabeled traffic allowed by default
  303. [ 0.237019] pnp: PnP ACPI init
  304. [ 0.237044] ACPI: bus type pnp registered
  305. [ 0.239974] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
  306. [ 0.239979] pnp 00:08: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
  307. [ 0.239983] pnp 00:08: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
  308. [ 0.239987] pnp 00:08: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
  309. [ 0.239992] pnp 00:08: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
  310. [ 0.239999] pnp 00:08: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
  311. [ 0.240005] pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
  312. [ 0.240010] pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
  313. [ 0.240014] pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
  314. [ 0.240018] pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
  315. [ 0.240022] pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
  316. [ 0.240026] pnp 00:08: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
  317. [ 0.240030] pnp 00:08: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
  318. [ 0.243567] pnp: PnP ACPI: found 17 devices
  319. [ 0.243571] ACPI: ACPI bus type pnp unregistered
  320. [ 0.243577] PnPBIOS: Disabled by ACPI PNP
  321. [ 0.243595] system 00:07: ioport range 0x290-0x297 has been reserved
  322. [ 0.243606] system 00:08: ioport range 0x3e0-0x3e7 has been reserved
  323. [ 0.243610] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
  324. [ 0.243613] system 00:08: ioport range 0x800-0x87f has been reserved
  325. [ 0.243617] system 00:08: ioport range 0x400-0x41f has been reserved
  326. [ 0.243626] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
  327. [ 0.243631] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
  328. [ 0.243642] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
  329. [ 0.243651] system 00:10: iomem range 0x0-0x9ffff could not be reserved
  330. [ 0.243655] system 00:10: iomem range 0xc0000-0xcffff could not be reserved
  331. [ 0.243659] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
  332. [ 0.243662] system 00:10: iomem range 0x100000-0x7fffffff could not be reserved
  333. [ 0.243666] system 00:10: iomem range 0xfff80000-0xffffffff has been reserved
  334. [ 0.278400] AppArmor: AppArmor Filesystem Enabled
  335. [ 0.278448] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
  336. [ 0.278454] pci 0000:00:01.0: IO window: 0xe000-0xefff
  337. [ 0.278461] pci 0000:00:01.0: MEM window: 0xfbf00000-0xfbffffff
  338. [ 0.278467] pci 0000:00:01.0: PREFETCH window: 0xb0000000-0xcfffffff
  339. [ 0.278487] pci 0000:00:01.0: setting latency timer to 64
  340. [ 0.278494] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
  341. [ 0.278498] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
  342. [ 0.278502] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
  343. [ 0.278505] pci_bus 0000:01: resource 1 mem: [0xfbf00000-0xfbffffff]
  344. [ 0.278509] pci_bus 0000:01: resource 2 pref mem [0xb0000000-0xcfffffff]
  345. [ 0.278562] NET: Registered protocol family 2
  346. [ 0.278707] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  347. [ 0.279199] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  348. [ 0.279715] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  349. [ 0.279988] TCP: Hash tables configured (established 131072 bind 65536)
  350. [ 0.279991] TCP reno registered
  351. [ 0.280156] NET: Registered protocol family 1
  352. [ 0.280259] Trying to unpack rootfs image as initramfs...
  353. [ 0.436607] Freeing initrd memory: 5016k freed
  354. [ 0.439835] cpufreq-nforce2: No nForce2 chipset.
  355. [ 0.439885] Scanning for low memory corruption every 60 seconds
  356. [ 0.440011] audit: initializing netlink socket (disabled)
  357. [ 0.440039] type=2000 audit(1259600574.440:1): initialized
  358. [ 0.449005] highmem bounce pool size: 64 pages
  359. [ 0.449013] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  360. [ 0.450942] VFS: Disk quotas dquot_6.5.2
  361. [ 0.451030] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  362. [ 0.451808] fuse init (API version 7.12)
  363. [ 0.451921] msgmni has been set to 1705
  364. [ 0.452222] alg: No test for stdrng (krng)
  365. [ 0.452245] io scheduler noop registered
  366. [ 0.452248] io scheduler anticipatory registered
  367. [ 0.452251] io scheduler deadline registered
  368. [ 0.452311] io scheduler cfq registered (default)
  369. [ 0.452336] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
  370. [ 0.452427] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
  371. [ 0.452442] pci 0000:01:00.0: Boot video device
  372. [ 0.452586] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  373. [ 0.452621] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  374. [ 0.452801] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
  375. [ 0.452806] ACPI: Power Button [PWRF]
  376. [ 0.452891] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
  377. [ 0.452898] ACPI: Sleep Button [SLPB]
  378. [ 0.452957] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
  379. [ 0.452962] ACPI: Power Button [PWRB]
  380. [ 0.453652] processor LNXCPU:00: registered as cooling_device0
  381. [ 0.453659] ACPI: Processor [CPU0] (supports 16 throttling states)
  382. [ 0.453905] processor LNXCPU:01: registered as cooling_device1
  383. [ 0.457596] isapnp: Scanning for PnP cards...
  384. [ 0.777055] Switched to high resolution mode on CPU 1
  385. [ 0.780044] Switched to high resolution mode on CPU 0
  386. [ 0.811797] isapnp: No Plug & Play device found
  387. [ 0.813361] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  388. [ 0.813524] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  389. [ 0.813964] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  390. [ 0.815416] brd: module loaded
  391. [ 0.816064] loop: module loaded
  392. [ 0.816168] input: Macintosh mouse button emulation as /devices/virtual/input/input3
  393. [ 0.817118] pata_via 0000:00:0f.1: version 0.3.4
  394. [ 0.817137] pata_via 0000:00:0f.1: can't derive routing for PCI INT A
  395. [ 0.817374] scsi0 : pata_via
  396. [ 0.817491] scsi1 : pata_via
  397. [ 0.819753] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
  398. [ 0.819758] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
  399. [ 0.819963] alloc irq_desc for 20 on node -1
  400. [ 0.819967] alloc kstat_irqs on node -1
  401. [ 0.819975] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
  402. [ 0.820037] pata_acpi 0000:00:0f.0: PCI INT B disabled
  403. [ 0.820464] Fixed MDIO Bus: probed
  404. [ 0.820513] PPP generic driver version 2.4.2
  405. [ 0.820647] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  406. [ 0.820673] alloc irq_desc for 21 on node -1
  407. [ 0.820676] alloc kstat_irqs on node -1
  408. [ 0.820682] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
  409. [ 0.820700] ehci_hcd 0000:00:10.4: EHCI Host Controller
  410. [ 0.820765] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
  411. [ 0.820836] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbeff800
  412. [ 0.832013] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
  413. [ 0.832118] usb usb1: configuration #1 chosen from 1 choice
  414. [ 0.832160] hub 1-0:1.0: USB hub found
  415. [ 0.832171] hub 1-0:1.0: 8 ports detected
  416. [ 0.832268] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  417. [ 0.832295] uhci_hcd: USB Universal Host Controller Interface driver
  418. [ 0.832335] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
  419. [ 0.832343] uhci_hcd 0000:00:10.0: UHCI Host Controller
  420. [ 0.832388] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
  421. [ 0.832413] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000cc00
  422. [ 0.832523] usb usb2: configuration #1 chosen from 1 choice
  423. [ 0.832560] hub 2-0:1.0: USB hub found
  424. [ 0.832569] hub 2-0:1.0: 2 ports detected
  425. [ 0.832634] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
  426. [ 0.832642] uhci_hcd 0000:00:10.1: UHCI Host Controller
  427. [ 0.832683] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
  428. [ 0.832708] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c480
  429. [ 0.832806] usb usb3: configuration #1 chosen from 1 choice
  430. [ 0.832842] hub 3-0:1.0: USB hub found
  431. [ 0.832851] hub 3-0:1.0: 2 ports detected
  432. [ 0.832915] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  433. [ 0.832923] uhci_hcd 0000:00:10.2: UHCI Host Controller
  434. [ 0.832972] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
  435. [ 0.832997] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c400
  436. [ 0.833104] usb usb4: configuration #1 chosen from 1 choice
  437. [ 0.833141] hub 4-0:1.0: USB hub found
  438. [ 0.833151] hub 4-0:1.0: 2 ports detected
  439. [ 0.833218] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  440. [ 0.833226] uhci_hcd 0000:00:10.3: UHCI Host Controller
  441. [ 0.833267] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
  442. [ 0.833292] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c080
  443. [ 0.833388] usb usb5: configuration #1 chosen from 1 choice
  444. [ 0.833426] hub 5-0:1.0: USB hub found
  445. [ 0.833435] hub 5-0:1.0: 2 ports detected
  446. [ 0.833580] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  447. [ 0.834040] serio: i8042 KBD port at 0x60,0x64 irq 1
  448. [ 0.834049] serio: i8042 AUX port at 0x60,0x64 irq 12
  449. [ 0.834124] mice: PS/2 mouse device common for all mice
  450. [ 0.834268] rtc_cmos 00:02: RTC can wake from S4
  451. [ 0.834311] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  452. [ 0.834367] rtc0: alarms up to one year, y3k, 114 bytes nvram
  453. [ 0.834518] device-mapper: uevent: version 1.0.3
  454. [ 0.834663] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  455. [ 0.834769] device-mapper: multipath: version 1.1.0 loaded
  456. [ 0.834773] device-mapper: multipath round-robin: version 1.0.0 loaded
  457. [ 0.834936] EISA: Probing bus 0 at eisa.0
  458. [ 0.834945] Cannot allocate resource for EISA slot 1
  459. [ 0.834980] EISA: Detected 0 cards.
  460. [ 0.835103] cpuidle: using governor ladder
  461. [ 0.835108] cpuidle: using governor menu
  462. [ 0.835890] TCP cubic registered
  463. [ 0.836087] NET: Registered protocol family 10
  464. [ 0.836793] lo: Disabled Privacy Extensions
  465. [ 0.837363] NET: Registered protocol family 17
  466. [ 0.837388] Bluetooth: L2CAP ver 2.13
  467. [ 0.837391] Bluetooth: L2CAP socket layer initialized
  468. [ 0.837395] Bluetooth: SCO (Voice Link) ver 0.6
  469. [ 0.837398] Bluetooth: SCO socket layer initialized
  470. [ 0.837437] Bluetooth: RFCOMM TTY layer initialized
  471. [ 0.837441] Bluetooth: RFCOMM socket layer initialized
  472. [ 0.837444] Bluetooth: RFCOMM ver 1.11
  473. [ 0.837492] Using IPI No-Shortcut mode
  474. [ 0.837579] PM: Resume from disk failed.
  475. [ 0.837596] registered taskstats version 1
  476. [ 0.837749] Magic number: 1:52:38
  477. [ 0.837760] bdi 7:3: hash matches
  478. [ 0.837779] serial 00:0a: hash matches
  479. [ 0.837847] rtc_cmos 00:02: setting system clock to 2009-11-30 17:02:55 UTC (1259600575)
  480. [ 0.837852] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  481. [ 0.837854] EDD information not available.
  482. [ 0.860082] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
  483. [ 0.980486] ata1.00: ATAPI: HL-DT-STDVDRRW GSA-4166B, 1.02, max UDMA/66
  484. [ 0.980521] ata1.00: limited to UDMA/33 due to 40-wire cable
  485. [ 0.996381] ata1.00: configured for UDMA/33
  486. [ 0.999291] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-4166B 1.02 PQ: 0 ANSI: 5
  487. [ 1.004430] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  488. [ 1.004435] Uniform CD-ROM driver Revision: 3.20
  489. [ 1.004547] sr 0:0:0:0: Attached scsi CD-ROM sr0
  490. [ 1.004611] sr 0:0:0:0: Attached scsi generic sg0 type 5
  491. [ 1.171444] Freeing unused kernel memory: 540k freed
  492. [ 1.171907] Write protecting the kernel text: 4568k
  493. [ 1.171977] Write protecting the kernel read-only data: 1836k
  494. [ 1.265668] ramzswap: disk size set to 515400 kB
  495. [ 1.331547] Linux agpgart interface v0.103
  496. [ 1.337133] agpgart: Detected VIA PT880 Ultra chipset
  497. [ 1.368842] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
  498. [ 1.373941] agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
  499. [ 1.373988] alloc irq_desc for 23 on node -1
  500. [ 1.373993] alloc kstat_irqs on node -1
  501. [ 1.374004] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  502. [ 1.374052] Invalid MAC address
  503. [ 1.374068] via-rhine: probe of 0000:00:12.0 failed with error -5
  504. [ 1.379672] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  505. [ 1.379697] alloc irq_desc for 18 on node -1
  506. [ 1.379702] alloc kstat_irqs on node -1
  507. [ 1.379714] r8169 0000:00:0b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  508. [ 1.379753] r8169 0000:00:0b.0: no PCI Express capability
  509. [ 1.381561] eth0: RTL8110s at 0xf81aec00, 00:08:a1:89:7e:1b, XID 04000000 IRQ 18
  510. [ 1.395745] sata_via 0000:00:0f.0: version 2.4
  511. [ 1.395766] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
  512. [ 1.395819] sata_via 0000:00:0f.0: routed to hard irq line 5
  513. [ 1.395943] scsi2 : sata_via
  514. [ 1.396077] scsi3 : sata_via
  515. [ 1.399355] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xd480 bmdma 0xd000 irq 20
  516. [ 1.399363] ata4: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 20
  517. [ 1.443657] Adding 515396k swap on /dev/ramzswap0. Priority:100 extents:1 across:515396k SSD
  518. [ 1.596019] usb 1-8: new high speed USB device using ehci_hcd and address 6
  519. [ 1.616021] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  520. [ 1.730150] usb 1-8: configuration #1 chosen from 1 choice
  521. [ 1.781355] ata3.00: ATA-7: SAMSUNG HD160JJ, ZM100-33, max UDMA7
  522. [ 1.781361] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
  523. [ 1.788378] ata3.00: configured for UDMA/133
  524. [ 1.788524] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD160JJ ZM10 PQ: 0 ANSI: 5
  525. [ 1.788758] sd 2:0:0:0: Attached scsi generic sg1 type 0
  526. [ 1.788844] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
  527. [ 1.788957] sd 2:0:0:0: [sda] Write Protect is off
  528. [ 1.788962] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  529. [ 1.789000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  530. [ 1.789206] sda: sda1
  531. [ 1.796739] sd 2:0:0:0: [sda] Attached SCSI disk
  532. [ 1.968016] usb 2-1: new full speed USB device using uhci_hcd and address 2
  533. [ 1.992015] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  534. [ 2.111629] usb 2-1: configuration #1 chosen from 1 choice
  535. [ 2.114599] hub 2-1:1.0: USB hub found
  536. [ 2.116539] hub 2-1:1.0: 2 ports detected
  537. [ 2.164216] ata4.00: HPA unlocked: 488395055 -> 488397168, native 488397168
  538. [ 2.164223] ata4.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
  539. [ 2.164228] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  540. [ 2.172371] ata4.00: configured for UDMA/133
  541. [ 2.172505] scsi 3:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
  542. [ 2.172696] sd 3:0:0:0: Attached scsi generic sg2 type 0
  543. [ 2.172752] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  544. [ 2.172827] sd 3:0:0:0: [sdb] Write Protect is off
  545. [ 2.172831] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  546. [ 2.172868] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  547. [ 2.173072] sdb: sdb1 sdb2 sdb3
  548. [ 2.218483] sd 3:0:0:0: [sdb] Attached SCSI disk
  549. [ 2.246704] [drm] Initialized drm 1.1.0 20060810
  550. [ 2.277222] [drm] radeon default to kernel modesetting DISABLED.
  551. [ 2.277383] alloc irq_desc for 16 on node -1
  552. [ 2.277388] alloc kstat_irqs on node -1
  553. [ 2.277401] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  554. [ 2.278062] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
  555. [ 2.365028] usb 2-2: new full speed USB device using uhci_hcd and address 3
  556. [ 2.515682] usb 2-2: configuration #1 chosen from 1 choice
  557. [ 2.518634] hub 2-2:1.0: USB hub found
  558. [ 2.520566] hub 2-2:1.0: 2 ports detected
  559. [ 2.768030] usb 3-1: new full speed USB device using uhci_hcd and address 2
  560. [ 2.916037] usb 3-1: configuration #1 chosen from 1 choice
  561. [ 2.918943] hub 3-1:1.0: USB hub found
  562. [ 2.920887] hub 3-1:1.0: 2 ports detected
  563. [ 3.164017] usb 3-2: new full speed USB device using uhci_hcd and address 3
  564. [ 3.312043] usb 3-2: configuration #1 chosen from 1 choice
  565. [ 3.314968] hub 3-2:1.0: USB hub found
  566. [ 3.316912] hub 3-2:1.0: 2 ports detected
  567. [ 3.401627] usb 2-2.2: new full speed USB device using uhci_hcd and address 4
  568. [ 3.565764] usb 2-2.2: configuration #1 chosen from 1 choice
  569. [ 3.649935] usb 3-1.1: new full speed USB device using uhci_hcd and address 4
  570. [ 4.234588] xor: automatically using best checksumming function: pIII_sse
  571. [ 4.253006] pIII_sse : 4576.000 MB/sec
  572. [ 4.253012] xor: using function: pIII_sse (4576.000 MB/sec)
  573. [ 4.258073] device-mapper: dm-raid45: initialized v0.2594b
  574. [ 9.558756] kjournald starting. Commit interval 5 seconds
  575. [ 9.558770] EXT3-fs: mounted filesystem with writeback data mode.
  576. [ 13.789717] usb 3-1.1: configuration #1 chosen from 1 choice
  577. [ 13.865601] usb 3-1.2: new low speed USB device using uhci_hcd and address 5
  578. [ 14.003713] usb 3-1.2: configuration #1 chosen from 1 choice
  579. [ 36.470989] udev: starting version 147
  580. [ 36.517447] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  581. [ 36.526766] Adding 2417772k swap on /dev/sdb3. Priority:-1 extents:1 across:2417772k
  582. [ 36.583288] udev: renamed network interface eth0 to eth3
  583. [ 36.636568] Linux video capture interface: v2.00
  584. [ 36.946779] EXT3 FS on sdb1, internal journal
  585. [ 37.004834] lp: driver loaded but no devices found
  586. [ 37.050820] bttv: driver version 0.9.18 loaded
  587. [ 37.050827] bttv: using 8 buffers with 2080k (520 pages) each for capture
  588. [ 37.050909] bttv: Bt8xx card found (0).
  589. [ 37.050938] alloc irq_desc for 17 on node -1
  590. [ 37.050943] alloc kstat_irqs on node -1
  591. [ 37.050955] bttv 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  592. [ 37.050972] bttv0: Bt878 (rev 2) at 0000:00:0a.0, irq: 17, latency: 32, mmio: 0xaffff000
  593. [ 37.065073] parport_pc 00:06: reported by Plug and Play ACPI
  594. [ 37.065198] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
  595. [ 37.083955] Floppy drive(s): fd0 is 1.44M
  596. [ 37.088321] Bluetooth: Generic Bluetooth USB driver ver 0.5
  597. [ 37.088519] usbcore: registered new interface driver btusb
  598. [ 37.089561] bttv0: detected: (Askey Magic/others) TView99 CPH06x [card=38], PCI subsystem ID is 144f:3000
  599. [ 37.089573] bttv0: using: Askey CPH06X TView99 [card=38,insmod option]
  600. [ 37.089579] IRQ 17/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
  601. [ 37.089650] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
  602. [ 37.111976] usbcore: registered new interface driver hiddev
  603. [ 37.113357] ppdev: user-space parallel port driver
  604. [ 37.118165] FDC 0 is a post-1991 82077
  605. [ 37.128646] gspca: main v2.6.0 registered
  606. [ 37.132592] gspca: probing 046d:092b
  607. [ 37.133238] bttv0: tuner type=35
  608. [ 37.133961] input: Device USB Device as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1.2/3-1.2:1.0/input/input5
  609. [ 37.134100] generic-usb 0003:05FE:1010.0001: input,hidraw0: USB HID v1.00 Keyboard [Device USB Device] on usb-0000:00:10.1-1.2/input0
  610. [ 37.144766] Initializing USB Mass Storage driver...
  611. [ 37.160544] lp0: using parport0 (interrupt-driven).
  612. [ 37.168775] input: Device USB Device as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1.2/3-1.2:1.1/input/input6
  613. [ 37.168931] generic-usb 0003:05FE:1010.0002: input,hidraw1: USB HID v1.00 Mouse [Device USB Device] on usb-0000:00:10.1-1.2/input1
  614. [ 37.168963] usbcore: registered new interface driver usbhid
  615. [ 37.168969] usbhid: v2.6:USB HID core driver
  616. [ 37.194663] scsi4 : SCSI emulation for USB Mass Storage devices
  617. [ 37.199443] usbcore: registered new interface driver usb-storage
  618. [ 37.199453] USB Mass Storage support registered.
  619. [ 37.199867] usb-storage: device found at 6
  620. [ 37.199872] usb-storage: waiting for device to settle before scanning
  621. [ 37.235399] ip_tables: (C) 2000-2006 Netfilter Core Team
  622. [ 37.262334] gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x200, speed 736kHz
  623. [ 37.285963] gspca: probe ok
  624. [ 37.286005] usbcore: registered new interface driver spca561
  625. [ 37.286012] spca561: registered
  626. [ 37.327223] psmouse serio1: ID: 10 00 64
  627. [ 37.358830] bttv0: audio absent, no audio device found!
  628. [ 37.366629] microcode: CPU0 sig=0xf33, pf=0x4, revision=0xc
  629. [ 37.366641] platform microcode: firmware: requesting intel-ucode/0f-03-03
  630. [ 37.457843] All bytes are equal. It is not a TEA5767
  631. [ 37.458031] tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
  632. [ 37.474990] tuner-simple 1-0060: creating new instance
  633. [ 37.474999] tuner-simple 1-0060: type set to 35 (Temic PAL_DK/SECAM_L (4012 FY5))
  634. [ 37.475724] bttv0: registered device video1
  635. [ 37.475764] bttv0: registered device vbi0
  636. [ 37.475784] bttv0: PLL: 28636363 => 35468950 .
  637. [ 37.488846] microcode: CPU1 sig=0xf33, pf=0x4, revision=0xc
  638. [ 37.488857] platform microcode: firmware: requesting intel-ucode/0f-03-03
  639. [ 37.490034] .
  640. [ 37.499285] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  641. [ 37.505201] ok
  642. [ 37.505964] input: bttv IR (card=38) as /devices/pci0000:00/0000:00:0a.0/input/input7
  643. [ 37.506757] w83627ehf: Found W83627EHF chip at 0x290
  644. [ 37.506935] w83627ehf w83627ehf.656: VID pins in output mode, CPU VID not available
  645. [ 37.508903] Bt87x 0000:00:0a.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  646. [ 37.509247] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
  647. [ 37.512310] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
  648. [ 37.512323] alloc irq_desc for 22 on node -1
  649. [ 37.512327] alloc kstat_irqs on node -1
  650. [ 37.512338] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
  651. [ 37.544071] scsi5 : vhba
  652. [ 37.556066] kjournald starting. Commit interval 5 seconds
  653. [ 37.556427] EXT3 FS on sda1, internal journal
  654. [ 37.556437] EXT3-fs: mounted filesystem with writeback data mode.
  655. [ 38.027865] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input8
  656. [ 38.264023] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
  657. [ 38.768255] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
  658. [ 38.768282] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
  659. [ 38.769547] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
  660. [ 38.769724] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
  661. [ 39.284156] codec_read: codec 0 is not valid [0xfe0000]
  662. [ 39.292129] codec_read: codec 0 is not valid [0xfe0000]
  663. [ 39.300171] codec_read: codec 0 is not valid [0xfe0000]
  664. [ 39.308160] codec_read: codec 0 is not valid [0xfe0000]
  665. [ 39.553778] kjournald starting. Commit interval 5 seconds
  666. [ 39.554137] EXT3 FS on sdb2, internal journal
  667. [ 39.554146] EXT3-fs: mounted filesystem with writeback data mode.
  668. [ 39.871518] r8169: eth3: link up
  669. [ 40.147893] type=1505 audit(1259600614.806:2): operation="profile_load" pid=1224 name=/sbin/dhclient3
  670. [ 40.148720] type=1505 audit(1259600614.810:3): operation="profile_load" pid=1224 name=/usr/lib/NetworkManager/nm-dhcp-client.action
  671. [ 40.149128] type=1505 audit(1259600614.810:4): operation="profile_load" pid=1224 name=/usr/lib/connman/scripts/dhclient-script
  672. [ 40.153928] type=1505 audit(1259600614.814:5): operation="profile_load" pid=1226 name=/usr/bin/freshclam
  673. [ 40.157039] type=1505 audit(1259600614.818:6): operation="profile_load" pid=1227 name=/usr/lib/cups/backend/cups-pdf
  674. [ 40.158035] type=1505 audit(1259600614.818:7): operation="profile_load" pid=1227 name=/usr/sbin/cupsd
  675. [ 40.161697] type=1505 audit(1259600614.822:8): operation="profile_load" pid=1228 name=/usr/sbin/dhcpd3
  676. [ 40.164449] type=1505 audit(1259600614.826:9): operation="profile_load" pid=1229 name=/usr/sbin/mysqld
  677. [ 40.167338] type=1505 audit(1259600614.826:10): operation="profile_load" pid=1230 name=/usr/sbin/mysqld-akonadi
  678. [ 40.270202] type=1505 audit(1259600614.930:11): operation="profile_load" pid=1231 name=/usr/sbin/ntpd
  679. [ 42.196226] usb-storage: device scan complete
  680. [ 42.196828] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
  681. [ 42.197478] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
  682. [ 42.198079] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
  683. [ 42.198702] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
  684. [ 42.199343] sd 4:0:0:0: Attached scsi generic sg3 type 0
  685. [ 42.199547] sd 4:0:0:1: Attached scsi generic sg4 type 0
  686. [ 42.199749] sd 4:0:0:2: Attached scsi generic sg5 type 0
  687. [ 42.199946] sd 4:0:0:3: Attached scsi generic sg6 type 0
  688. [ 42.234833] sd 4:0:0:0: [sdc] Attached SCSI removable disk
  689. [ 42.236881] sd 4:0:0:3: [sdf] Attached SCSI removable disk
  690. [ 42.247344] sd 4:0:0:2: [sde] Attached SCSI removable disk
  691. [ 42.255321] sd 4:0:0:1: [sdd] Attached SCSI removable disk
  692. [ 45.778600] __ratelimit: 3 callbacks suppressed
  693. [ 45.778607] type=1503 audit(1259600620.438:13): operation="open" pid=1575 parent=1574 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  694. [ 45.821337] type=1503 audit(1259600620.482:14): operation="open" pid=1596 parent=1595 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  695. [ 46.005037] type=1503 audit(1259600620.666:15): operation="open" pid=1711 parent=1603 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  696. [ 46.846582] type=1503 audit(1259600621.506:16): operation="open" pid=1725 parent=1724 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  697. [ 47.872707] type=1503 audit(1259600622.534:17): operation="open" pid=1797 parent=1796 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  698. [ 47.941658] type=1503 audit(1259600622.602:18): operation="open" pid=1808 parent=1807 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  699. [ 48.098823] scsi 5:0:0:0: CD-ROM CDEmu Virt. CD/DVD-ROM 1.10 PQ: 0 ANSI: 0
  700. [ 48.099348] sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
  701. [ 48.099542] sr 5:0:0:0: Attached scsi CD-ROM sr1
  702. [ 48.099681] sr 5:0:0:0: Attached scsi generic sg7 type 5
  703. [ 48.099995] scsi 5:0:1:0: CD-ROM CDEmu Virt. CD/DVD-ROM 1.10 PQ: 0 ANSI: 0
  704. [ 48.100500] sr2: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
  705. [ 48.100695] sr 5:0:1:0: Attached scsi CD-ROM sr2
  706. [ 48.100818] sr 5:0:1:0: Attached scsi generic sg8 type 5
  707. [ 49.345816] martian source 255.255.255.255 from 10.135.194.1, on dev eth3
  708. [ 49.345821] ll header: ff:ff:ff:ff:ff:ff:00:1f:ca:20:01:05:08:00
  709. [ 50.824014] eth3: no IPv6 routers present
  710. [ 63.724152] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  711. [ 63.724158] Bluetooth: BNEP filters: protocol multicast
  712. [ 63.737659] Bridge firewalling registered
  713. [ 66.634739] CPU0 attaching NULL sched-domain.
  714. [ 66.634747] CPU1 attaching NULL sched-domain.
  715. [ 66.652072] CPU0 attaching sched-domain:
  716. [ 66.652077] domain 0: span 0-1 level SIBLING
  717. [ 66.652081] groups: 0 1
  718. [ 66.652088] domain 1: span 0-1 level MC
  719. [ 66.652092] groups: 0-1 (__cpu_power = 2048)
  720. [ 66.652099] CPU1 attaching sched-domain:
  721. [ 66.652102] domain 0: span 0-1 level SIBLING
  722. [ 66.652106] groups: 1 0
  723. [ 66.652112] domain 1: span 0-1 level MC
  724. [ 66.652115] groups: 0-1 (__cpu_power = 2048)
  725. [ 97.725597] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  726. [ 97.725844] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  727. [ 97.725848] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  728. [ 97.725851] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  729. [ 101.424413] agpgart-via 0000:00:00.0: AGP 3.5 bridge
  730. [ 101.424442] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
  731. [ 101.424564] pci 0000:01:00.0: putting AGP V3 device into 8x mode
  732. [ 101.651261] [drm] Setting GART location based on new memory map
  733. [ 101.651270] [drm] Loading R300 Microcode
  734. [ 101.651303] [drm] Num pipes: 1
  735. [ 101.651312] [drm] writeback test succeeded in 1 usecs