Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.0_BETA2 (GENERIC)
total memory = 2012 MB
avail memory = 1938 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Apple Inc. MacBook4,1 (1.0)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz, id 0x10676
cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz, id 0x10676
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <APPLE , Apple00,000000c1>, AslId < ,01000013>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09): using acpiecdt0
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
PNLF (APP0002) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout1 at acpivga0 (VGA, 0x0300): ACPI Display Output Device
acpiout2 at acpivga0 (TV, 0x0200): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout0): Int. Digital Flat Panel, index 0, port 0, head 0, bios detect
acpivga0: 0x0200 (acpiout2): TV/HDTV Monitor, index 0, port 0, head 0, bios detect
acpivga0: 0x0300 (acpiout1): Ext. Digital Monitor, index 0, port 0, head 0, bios detect
SMC (APP0001) at acpi0 not configured
SMS0 (APP0003) at acpi0 not configured
SBS0 (ACPI0002) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2a00 (rev. 0x03)
agp0 at pchb0: detected 15868k stolen memory
agp0: aperture at 0x80000000, size 0x20000000
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a02 (rev. 0x03)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
i915drm0 at vga0: Intel i965GM
i915drm0: AGP at 0x80000000 256MB
i915drm0: Initialized i915 1.6.0 20080730
vendor 0x8086 product 0x2a03 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 16
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x03)
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 20
hdafg0 at hdaudio0: Realtek ALC885
hdafg0: ADC00 2ch: Mic In [Built-In]
hdafg0: ADC01 2ch: Line In [Jack]
hdafg0: DIG-In02 2ch: SPDIF In [Jack]
hdafg0: DAC03 4ch: Speaker [Built-In]
hdafg0: DAC04 2ch: HP Out [Jack]
hdafg0: DIG05 2ch: SPDIF Out [Jack]
hdafg0: 4ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x03)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 4: vendor 0x8086 product 0x2847 (rev. 0x03)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bwi0 at pci2 dev 0 function 0: Broadcom Wireless
bwi0: interrupting at ioapic0 pin 16
bwi0: BBP id 0x4321, BBP rev 0x3, BBP pkg 0
bwi0: MAC: rev 12
bwi0: bus regwin already exists
bwi0: PHY type 4, rev 2, ver 5
bwi0: unsupported PHY type 4
ppb2 at pci0 dev 28 function 5: vendor 0x8086 product 0x2849 (rev. 0x03)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci3 dev 0 function 0, Yukon-2 EC Ultra rev. B0 (0x3): ioapic0 pin 17
msk0 at mskc0 port A: Ethernet address 00:22:41:21:43:0c
ukphy0 at msk0 phy 0: OUI 0x000ac2, model 0x000b, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 16
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 18
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2832 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 21
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x03)
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf3)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
fwohci0 at pci4 dev 3 function 0: vendor 0x11c1 product 0x5811 (rev. 0x61)
fwohci0: interrupting at ioapic0 pin 19
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:22:41:ff:fe:41:d6:24
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2815 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 21 for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2: Intel 82801HEM Serial ATA Controller (ICH8M) (rev. 0x03)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 18 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 20
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 57 us, pow 100 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 32000 mW, 2400 MHz
acpicpu0: P1: FFH, lat 10 us, pow 29166 mW, 2200 MHz
acpicpu0: P2: FFH, lat 10 us, pow 26333 mW, 2000 MHz
acpicpu0: P3: FFH, lat 10 us, pow 23500 mW, 1800 MHz
acpicpu0: P4: FFH, lat 10 us, pow 20666 mW, 1600 MHz
acpicpu0: P5: FFH, lat 10 us, pow 17833 mW, 1400 MHz
acpicpu0: P6: FFH, lat 10 us, pow 15000 mW, 1200 MHz
acpicpu0: P7: FFH, lat 10 us, pow 14300 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 14300 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 12512 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 10725 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 8937 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 7150 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 5362 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3575 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1787 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=2, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-R UJ-867, HG08A82F, HB01> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
ehci0: handing over full speed device on port 1 to uhci0
ugen0 at uhub6 port 4
ugen0: vendor 0x05ac product 0x8300, rev 2.00/0.0c, addr 2
ehci1: handing over low speed device on port 5 to uhci4
wd0 at atabus2 drive 0
wd0: <Hitachi HTS542516K9SA00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
ehci1: handing over full speed device on port 6 to uhci4
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: vendor 0x05ac product 0x1000, rev 2.00/19.65, addr 2, iclass 3/1
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev1 at uhub5 port 1 configuration 1 interface 0
uhidev1: Apple Computer, Inc. IR Receiver, rev 2.00/0.16, addr 2, iclass 3/0
uhidev1: 38 report ids
uhid0 at uhidev1 reportid 36: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 37: input=4, output=0, feature=0
uhid2 at uhidev1 reportid 38: input=4, output=0, feature=0
uhidev2 at uhub5 port 2 configuration 1 interface 0
uhidev2: Apple Computer Apple Internal Keyboard / Trackpad, rev 2.00/0.07, addr 3, iclass 3/1
ukbd1 at uhidev2: 8 modifier keys, 5 key codes, apple fn key
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub5 port 2 configuration 1 interface 1
uhidev3: Apple Computer Apple Internal Keyboard / Trackpad, rev 2.00/0.07, addr 3, iclass 3/1
uhidev3: 5 report ids
ums0 at uhidev3 reportid 2: 3 buttons
wsmouse0 at ums0 mux 0
uhid3 at uhidev3 reportid 5: input=63, output=0, feature=16
uhidev4 at uhub5 port 2 configuration 1 interface 2
uhidev4: Apple Computer Apple Internal Keyboard / Trackpad, rev 2.00/0.07, addr 3, iclass 3/0
uhid4 at uhidev4: input=1, output=0, feature=0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
i915drm0: interrupting at ioapic0 pin 16
set{u,g}id pid 2793 (gnome-pty-helper) was invoked by uid 1003 ppid 2722 (Terminal) with fd 2 closed
ehci0: handing over full speed device on port 2 to uhci0
cdce0 at uhub0 port 2 configuration 1 interface 0
cdce0: vendor 0x07b2 product 0x5101, rev 1.10/1.01, addr 3
cdce0: faking address
cdce0: address 2a:69:2a:00:00:00
i915drm0: interrupting at ioapic0 pin 16