1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.2.0-38-generic-pae (buildd@panlong) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #61-Ubuntu SMP Tue Feb 19 12:39:51 UTC 2013 (Ubuntu 3.2.0-38.61-generic-pae 3.2.37)
  4. [ 0.000000] KERNEL supported cpus:
  5. [ 0.000000] Intel GenuineIntel
  6. [ 0.000000] AMD AuthenticAMD
  7. [ 0.000000] NSC Geode by NSC
  8. [ 0.000000] Cyrix CyrixInstead
  9. [ 0.000000] Centaur CentaurHauls
  10. [ 0.000000] Transmeta GenuineTMx86
  11. [ 0.000000] Transmeta TransmetaCPU
  12. [ 0.000000] UMC UMC UMC UMC
  13. [ 0.000000] BIOS-provided physical RAM map:
  14. [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
  15. [ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
  16. [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  17. [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf65f000 (usable)
  18. [ 0.000000] BIOS-e820: 00000000cf65f000 - 00000000cf67f000 (ACPI data)
  19. [ 0.000000] BIOS-e820: 00000000cf67f000 - 00000000cf76f000 (ACPI NVS)
  20. [ 0.000000] BIOS-e820: 00000000cf76f000 - 00000000d0000000 (reserved)
  21. [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
  22. [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  23. [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
  24. [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
  25. [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
  26. [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  27. [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
  28. [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
  29. [ 0.000000] NX (Execute Disable) protection: active
  30. [ 0.000000] DMI 2.6 present.
  31. [ 0.000000] DMI: Dell Inc. Precision M4500/ , BIOS A06 11/20/2010
  32. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  33. [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  34. [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x1000000
  35. [ 0.000000] MTRR default type: uncachable
  36. [ 0.000000] MTRR fixed ranges enabled:
  37. [ 0.000000] 00000-9FFFF write-back
  38. [ 0.000000] A0000-BFFFF uncachable
  39. [ 0.000000] C0000-FFFFF write-protect
  40. [ 0.000000] MTRR variable ranges enabled:
  41. [ 0.000000] 0 base 000000000 mask F80000000 write-back
  42. [ 0.000000] 1 base 080000000 mask FC0000000 write-back
  43. [ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
  44. [ 0.000000] 3 base 100000000 mask F00000000 write-back
  45. [ 0.000000] 4 base 200000000 mask FC0000000 write-back
  46. [ 0.000000] 5 base 230000000 mask FF0000000 uncachable
  47. [ 0.000000] 6 disabled
  48. [ 0.000000] 7 disabled
  49. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  50. [ 0.000000] original variable MTRRs
  51. [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
  52. [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
  53. [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
  54. [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
  55. [ 0.000000] reg 4, base: 8GB, range: 1GB, type WB
  56. [ 0.000000] reg 5, base: 8960MB, range: 256MB, type UC
  57. [ 0.000000] total RAM covered: 8192M
  58. [ 0.000000] Found optimal setting for mtrr clean up
  59. [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G
  60. [ 0.000000] New variable MTRRs
  61. [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
  62. [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
  63. [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
  64. [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
  65. [ 0.000000] reg 4, base: 8GB, range: 512MB, type WB
  66. [ 0.000000] reg 5, base: 8704MB, range: 256MB, type WB
  67. [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
  68. [ 0.000000] found SMP MP-table at [c00f3e30] f3e30
  69. [ 0.000000] initial memory mapped : 0 - 02000000
  70. [ 0.000000] Base memory trampoline at [c0098000] 98000 size 16384
  71. [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
  72. [ 0.000000] 0000000000 - 0000200000 page 4k
  73. [ 0.000000] 0000200000 - 0037a00000 page 2M
  74. [ 0.000000] 0037a00000 - 0037bfe000 page 4k
  75. [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffa000-2000000
  76. [ 0.000000] RAMDISK: 35a3c000 - 36d16000
  77. [ 0.000000] ACPI: RSDP 000fe300 00024 (v02 DELL )
  78. [ 0.000000] ACPI: XSDT cf67de18 0006C (v01 DELL E2 06222004 MSFT 00010013)
  79. [ 0.000000] ACPI: FACP cf75fc18 000F4 (v04 DELL E2 06222004 MSFT 00010013)
  80. [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-365)
  81. [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCF76BF40/0x00000000CF76ED40, using 32 (20110623/tbfadt-489)
  82. [ 0.000000] ACPI: DSDT cf73e018 0A6C0 (v01 DELL E2 00001001 INTL 20080729)
  83. [ 0.000000] ACPI: FACS cf76bf40 00040
  84. [ 0.000000] ACPI: APIC cf67cf18 0008C (v02 DELL E2 06222004 MSFT 00010013)
  85. [ 0.000000] ACPI: TCPA cf76dd18 00032 (v02 00000000 00000000)
  86. [ 0.000000] ACPI: MCFG cf76dc98 0003C (v01 A M I GMCH945. 06222004 MSFT 00000097)
  87. [ 0.000000] ACPI: HPET cf76dc18 00038 (v01 DELL E2 00000001 ASL 00000061)
  88. [ 0.000000] ACPI: BOOT cf76db98 00028 (v01 DELL E2 06222004 AMI 00010013)
  89. [ 0.000000] ACPI: SLIC cf766818 00176 (v03 DELL E2 06222004 MSFT 00010013)
  90. [ 0.000000] ACPI: SSDT cf74d018 009F1 (v01 PmRef CpuPm 00003000 INTL 20080729)
  91. [ 0.000000] ACPI: DMAR cf75ff18 00080 (v01 INTEL CP_DALE 00000001 INTL 00000001)
  92. [ 0.000000] ACPI: Local APIC address 0xfee00000
  93. [ 0.000000] 8068MB HIGHMEM available.
  94. [ 0.000000] 891MB LOWMEM available.
  95. [ 0.000000] mapped low ram: 0 - 37bfe000
  96. [ 0.000000] low ram: 0 - 37bfe000
  97. [ 0.000000] Zone PFN ranges:
  98. [ 0.000000] DMA 0x00000010 -> 0x00001000
  99. [ 0.000000] Normal 0x00001000 -> 0x00037bfe
  100. [ 0.000000] HighMem 0x00037bfe -> 0x00230000
  101. [ 0.000000] Movable zone start PFN for each node
  102. [ 0.000000] early_node_map[3] active PFN ranges
  103. [ 0.000000] 0: 0x00000010 -> 0x0000009c
  104. [ 0.000000] 0: 0x00000100 -> 0x000cf65f
  105. [ 0.000000] 0: 0x00100000 -> 0x00230000
  106. [ 0.000000] On node 0 totalpages: 2094571
  107. [ 0.000000] free_area_init_node: node 0, pgdat c186b840, node_mem_map f143c200
  108. [ 0.000000] DMA zone: 32 pages used for memmap
  109. [ 0.000000] DMA zone: 0 pages reserved
  110. [ 0.000000] DMA zone: 3948 pages, LIFO batch:0
  111. [ 0.000000] Normal zone: 1752 pages used for memmap
  112. [ 0.000000] Normal zone: 222502 pages, LIFO batch:31
  113. [ 0.000000] HighMem zone: 16137 pages used for memmap
  114. [ 0.000000] HighMem zone: 1850200 pages, LIFO batch:31
  115. [ 0.000000] Using APIC driver default
  116. [ 0.000000] ACPI: PM-Timer IO Port: 0x408
  117. [ 0.000000] ACPI: Local APIC address 0xfee00000
  118. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  119. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
  120. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
  121. [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
  122. [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
  123. [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
  124. [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
  125. [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
  126. [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  127. [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  128. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  129. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  130. [ 0.000000] ACPI: IRQ0 used by override.
  131. [ 0.000000] ACPI: IRQ2 used by override.
  132. [ 0.000000] ACPI: IRQ9 used by override.
  133. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  134. [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
  135. [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
  136. [ 0.000000] nr_irqs_gsi: 40
  137. [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
  138. [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
  139. [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
  140. [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
  141. [ 0.000000] Booting paravirtualized kernel on bare hardware
  142. [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
  143. [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7b7b000 s34240 r0 d23104 u57344
  144. [ 0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
  145. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  146. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2076650
  147. [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-38-generic-pae root=UUID=122fb2ae-1a30-4582-8e3b-dcfc27f44870 ro quiet splash vt.handoff=7
  148. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  149. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  150. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  151. [ 0.000000] Initializing CPU#0
  152. [ 0.000000] allocated 36699904 bytes of page_cgroup
  153. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  154. [ 0.000000] Initializing HighMem for node 0 (00037bfe:00230000)
  155. [ 0.000000] Memory: 8239752k/9175040k available (5826k kernel code, 138532k reserved, 2850k data, 740k init, 7465348k highmem)
  156. [ 0.000000] virtual kernel memory layout:
  157. [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
  158. [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
  159. [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
  160. [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
  161. [ 0.000000] .init : 0xc187a000 - 0xc1933000 ( 740 kB)
  162. [ 0.000000] .data : 0xc15b083c - 0xc1879080 (2850 kB)
  163. [ 0.000000] .text : 0xc1000000 - 0xc15b083c (5826 kB)
  164. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  165. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  166. [ 0.000000] Hierarchical RCU implementation.
  167. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  168. [ 0.000000] NR_IRQS:2304 nr_irqs:744 16
  169. [ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
  170. [ 0.000000] Extended CMOS year: 2000
  171. [ 0.000000] vt handoff: transparent VT on vt#7
  172. [ 0.000000] Console: colour dummy device 80x25
  173. [ 0.000000] console [tty0] enabled
  174. [ 0.000000] hpet clockevent registered
  175. [ 0.000000] Fast TSC calibration using PIT
  176. [ 0.004000] Detected 2393.926 MHz processor.
  177. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.85 BogoMIPS (lpj=9575704)
  178. [ 0.000005] pid_max: default: 32768 minimum: 301
  179. [ 0.000025] Security Framework initialized
  180. [ 0.000038] AppArmor: AppArmor initialized
  181. [ 0.000040] Yama: becoming mindful.
  182. [ 0.000086] Mount-cache hash table entries: 512
  183. [ 0.000197] Initializing cgroup subsys cpuacct
  184. [ 0.000213] Initializing cgroup subsys memory
  185. [ 0.000220] Initializing cgroup subsys devices
  186. [ 0.000222] Initializing cgroup subsys freezer
  187. [ 0.000223] Initializing cgroup subsys blkio
  188. [ 0.000228] Initializing cgroup subsys perf_event
  189. [ 0.000250] CPU: Physical Processor ID: 0
  190. [ 0.000251] CPU: Processor Core ID: 0
  191. [ 0.000256] mce: CPU supports 9 MCE banks
  192. [ 0.000264] CPU0: Thermal monitoring handled by SMI
  193. [ 0.000271] using mwait in idle threads.
  194. [ 0.002063] ACPI: Core revision 20110623
  195. [ 0.008588] ftrace: allocating 26094 entries in 52 pages
  196. [ 0.015640] Enabling APIC mode: Flat. Using 1 I/O APICs
  197. [ 0.016025] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
  198. [ 0.055640] CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02
  199. [ 0.159934] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
  200. [ 0.159940] ... version: 3
  201. [ 0.159942] ... bit width: 48
  202. [ 0.159943] ... generic registers: 4
  203. [ 0.159944] ... value mask: 0000ffffffffffff
  204. [ 0.159945] ... max period: 000000007fffffff
  205. [ 0.159946] ... fixed-purpose events: 3
  206. [ 0.159948] ... event mask: 000000070000000f
  207. [ 0.160137] NMI watchdog enabled, takes one hw-pmu counter.
  208. [ 0.160212] CPU 1 irqstacks, hard=f7560000 soft=f7562000
  209. [ 0.160214] Booting Node 0, Processors #1
  210. [ 0.160216] smpboot cpu 1: start_ip = 98000
  211. [ 0.170455] Initializing CPU#1
  212. [ 0.247797] CPU1: Thermal monitoring handled by SMI
  213. [ 0.267858] NMI watchdog enabled, takes one hw-pmu counter.
  214. [ 0.267945] CPU 2 irqstacks, hard=f756e000 soft=f7570000
  215. [ 0.267947] #2
  216. [ 0.267948] smpboot cpu 2: start_ip = 98000
  217. [ 0.278067] Initializing CPU#2
  218. [ 0.355609] CPU2: Thermal monitoring handled by SMI
  219. [ 0.375657] NMI watchdog enabled, takes one hw-pmu counter.
  220. [ 0.375754] CPU 3 irqstacks, hard=f7584000 soft=f7586000
  221. [ 0.375756] #3
  222. [ 0.375757] smpboot cpu 3: start_ip = 98000
  223. [ 0.385877] Initializing CPU#3
  224. [ 0.463419] CPU3: Thermal monitoring handled by SMI
  225. [ 0.483491] NMI watchdog enabled, takes one hw-pmu counter.
  226. [ 0.483527] Brought up 4 CPUs
  227. [ 0.483529] Total of 4 processors activated (19151.51 BogoMIPS).
  228. [ 0.486199] devtmpfs: initialized
  229. [ 0.486307] EVM: security.selinux
  230. [ 0.486309] EVM: security.SMACK64
  231. [ 0.486310] EVM: security.capability
  232. [ 0.486334] PM: Registering ACPI NVS region at cf67f000 (983040 bytes)
  233. [ 0.487198] print_constraints: dummy:
  234. [ 0.487231] RTC time: 15:25:07, date: 03/15/13
  235. [ 0.487267] NET: Registered protocol family 16
  236. [ 0.487356] Trying to unpack rootfs image as initramfs...
  237. [ 0.487375] EISA bus registered
  238. [ 0.487392] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  239. [ 0.487394] ACPI: bus type pci registered
  240. [ 0.487463] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
  241. [ 0.487466] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
  242. [ 0.487467] PCI: Using MMCONFIG for extended config space
  243. [ 0.487469] PCI: Using configuration type 1 for base access
  244. [ 0.487477] dmi type 0xB1 record - unknown flag
  245. [ 0.488352] bio: create slab <bio-0> at 0
  246. [ 0.488427] ACPI: Added _OSI(Module Device)
  247. [ 0.488429] ACPI: Added _OSI(Processor Device)
  248. [ 0.488431] ACPI: Added _OSI(3.0 _SCP Extensions)
  249. [ 0.488433] ACPI: Added _OSI(Processor Aggregator Device)
  250. [ 0.490103] ACPI: EC: Look up EC in DSDT
  251. [ 0.547309] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
  252. [ 0.707337] ACPI: SSDT cf7ea918 003F0 (v01 PmRef Cpu0Ist 00003000 INTL 20080729)
  253. [ 0.707747] ACPI: Dynamic OEM Table Load:
  254. [ 0.707749] ACPI: SSDT (null) 003F0 (v01 PmRef Cpu0Ist 00003000 INTL 20080729)
  255. [ 0.707879] ACPI: SSDT cf7e8018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20080729)
  256. [ 0.708267] ACPI: Dynamic OEM Table Load:
  257. [ 0.708269] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20080729)
  258. [ 0.747175] ACPI: SSDT cf7e9a98 00303 (v01 PmRef ApIst 00003000 INTL 20080729)
  259. [ 0.747629] ACPI: Dynamic OEM Table Load:
  260. [ 0.747632] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20080729)
  261. [ 0.778986] ACPI: SSDT cf7e7d98 00119 (v01 PmRef ApCst 00003000 INTL 20080729)
  262. [ 0.779411] ACPI: Dynamic OEM Table Load:
  263. [ 0.779414] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20080729)
  264. [ 0.855427] Freeing initrd memory: 19304k freed
  265. [ 0.918710] ACPI: Interpreter enabled
  266. [ 0.918719] ACPI: (supports S0 S3 S4 S5)
  267. [ 0.918742] ACPI: Using IOAPIC for interrupt routing
  268. [ 1.542240] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
  269. [ 1.565668] ACPI: No dock devices found.
  270. [ 1.565670] HEST: Table not found.
  271. [ 1.565674] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  272. [ 1.566021] \_SB_.PCI0:_OSC invalid UUID
  273. [ 1.566022] _OSC request data:1 8 1f
  274. [ 1.566026] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
  275. [ 1.566590] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
  276. [ 1.566592] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
  277. [ 1.566594] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
  278. [ 1.566597] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfeafffff]
  279. [ 1.566610] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
  280. [ 1.566629] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
  281. [ 1.566650] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
  282. [ 1.566682] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  283. [ 1.566685] pci 0000:00:01.0: PME# disabled
  284. [ 1.566738] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
  285. [ 1.566763] pci 0000:00:19.0: reg 10: [mem 0xe8200000-0xe821ffff]
  286. [ 1.566775] pci 0000:00:19.0: reg 14: [mem 0xe8270000-0xe8270fff]
  287. [ 1.566786] pci 0000:00:19.0: reg 18: [io 0x7020-0x703f]
  288. [ 1.566876] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
  289. [ 1.566881] pci 0000:00:19.0: PME# disabled
  290. [ 1.566910] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
  291. [ 1.566935] pci 0000:00:1a.0: reg 10: [mem 0xe8260000-0xe82603ff]
  292. [ 1.567043] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  293. [ 1.567048] pci 0000:00:1a.0: PME# disabled
  294. [ 1.567079] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
  295. [ 1.567100] pci 0000:00:1b.0: reg 10: [mem 0xe8250000-0xe8253fff 64bit]
  296. [ 1.567197] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  297. [ 1.567201] pci 0000:00:1b.0: PME# disabled
  298. [ 1.567228] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
  299. [ 1.567329] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  300. [ 1.567334] pci 0000:00:1c.0: PME# disabled
  301. [ 1.567363] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
  302. [ 1.567463] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  303. [ 1.567468] pci 0000:00:1c.1: PME# disabled
  304. [ 1.567497] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
  305. [ 1.567597] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  306. [ 1.567602] pci 0000:00:1c.2: PME# disabled
  307. [ 1.567642] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
  308. [ 1.567667] pci 0000:00:1d.0: reg 10: [mem 0xe8240000-0xe82403ff]
  309. [ 1.567775] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  310. [ 1.567780] pci 0000:00:1d.0: PME# disabled
  311. [ 1.567805] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
  312. [ 1.567891] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
  313. [ 1.568015] pci 0000:00:1f.2: [8086:3b2e] type 0 class 0x000101
  314. [ 1.568037] pci 0000:00:1f.2: reg 10: [io 0x70f0-0x70f7]
  315. [ 1.568048] pci 0000:00:1f.2: reg 14: [io 0x70e0-0x70e3]
  316. [ 1.568059] pci 0000:00:1f.2: reg 18: [io 0x70d0-0x70d7]
  317. [ 1.568070] pci 0000:00:1f.2: reg 1c: [io 0x70c0-0x70c3]
  318. [ 1.568081] pci 0000:00:1f.2: reg 20: [io 0x70b0-0x70bf]
  319. [ 1.568092] pci 0000:00:1f.2: reg 24: [io 0x70a0-0x70af]
  320. [ 1.568158] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
  321. [ 1.568179] pci 0000:00:1f.3: reg 10: [mem 0xe8230000-0xe82300ff 64bit]
  322. [ 1.568209] pci 0000:00:1f.3: reg 20: [io 0x7000-0x701f]
  323. [ 1.568257] pci 0000:00:1f.5: [8086:3b2d] type 0 class 0x000101
  324. [ 1.568279] pci 0000:00:1f.5: reg 10: [io 0x7090-0x7097]
  325. [ 1.568290] pci 0000:00:1f.5: reg 14: [io 0x7080-0x7083]
  326. [ 1.568300] pci 0000:00:1f.5: reg 18: [io 0x7070-0x7077]
  327. [ 1.568311] pci 0000:00:1f.5: reg 1c: [io 0x7060-0x7063]
  328. [ 1.568322] pci 0000:00:1f.5: reg 20: [io 0x7050-0x705f]
  329. [ 1.568334] pci 0000:00:1f.5: reg 24: [io 0x7040-0x704f]
  330. [ 1.568408] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
  331. [ 1.568435] pci 0000:00:1f.6: reg 10: [mem 0xe8220000-0xe8220fff 64bit]
  332. [ 1.568567] pci 0000:01:00.0: [10de:0a3c] type 0 class 0x000300
  333. [ 1.568576] pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
  334. [ 1.568585] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
  335. [ 1.568595] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
  336. [ 1.568602] pci 0000:01:00.0: reg 24: [io 0x6000-0x607f]
  337. [ 1.568608] pci 0000:01:00.0: reg 30: [mem 0xe3000000-0xe307ffff pref]
  338. [ 1.568659] pci 0000:01:00.1: [10de:0be2] type 0 class 0x000403
  339. [ 1.568668] pci 0000:01:00.1: reg 10: [mem 0xe3080000-0xe3083fff]
  340. [ 1.568750] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  341. [ 1.568753] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
  342. [ 1.568755] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe30fffff]
  343. [ 1.568812] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  344. [ 1.568817] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
  345. [ 1.568822] pci 0000:00:1c.0: bridge window [mem 0xe6e00000-0xe81fffff]
  346. [ 1.568984] pci 0000:03:00.0: [8086:422c] type 0 class 0x000280
  347. [ 1.569048] pci 0000:03:00.0: reg 10: [mem 0xe5a00000-0xe5a01fff 64bit]
  348. [ 1.569286] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
  349. [ 1.569319] pci 0000:03:00.0: PME# disabled
  350. [ 1.569439] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  351. [ 1.569443] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
  352. [ 1.569448] pci 0000:00:1c.1: bridge window [mem 0xe5a00000-0xe6dfffff]
  353. [ 1.569586] pci 0000:04:00.0: [1180:e822] type 0 class 0x000805
  354. [ 1.569604] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
  355. [ 1.569627] pci 0000:04:00.0: reg 10: [mem 0xe5940000-0xe59400ff]
  356. [ 1.569788] pci 0000:04:00.0: supports D1 D2
  357. [ 1.569789] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  358. [ 1.569795] pci 0000:04:00.0: PME# disabled
  359. [ 1.577626] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
  360. [ 1.577631] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
  361. [ 1.577636] pci 0000:00:1c.2: bridge window [mem 0xe3100000-0xe59fffff]
  362. [ 1.577715] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
  363. [ 1.577728] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
  364. [ 1.577730] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
  365. [ 1.577732] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  366. [ 1.577734] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
  367. [ 1.577761] pci_bus 0000:00: on NUMA node 0
  368. [ 1.577764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  369. [ 1.577918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
  370. [ 1.577970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  371. [ 1.578071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
  372. [ 1.578119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
  373. [ 1.578167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
  374. [ 1.578277] \_SB_.PCI0:_OSC invalid UUID
  375. [ 1.578278] _OSC request data:1 1f 1f
  376. [ 1.578282] pci0000:00: Requesting ACPI _OSC control (0x1d)
  377. [ 1.578311] \_SB_.PCI0:_OSC invalid UUID
  378. [ 1.578313] _OSC request data:1 0 1d
  379. [ 1.578316] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
  380. [ 1.578318] ACPI _OSC control for PCIe not granted, disabling ASPM
  381. [ 1.581751] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
  382. [ 1.581808] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
  383. [ 1.581826] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
  384. [ 1.581846] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
  385. [ 1.581862] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
  386. [ 1.581879] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
  387. [ 1.581896] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
  388. [ 1.581921] pci_bus 0000:3f: on NUMA node 0
  389. [ 1.581928] pci0000:3f: Requesting ACPI _OSC control (0x1d)
  390. [ 1.581930] pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
  391. [ 1.581931] ACPI _OSC control for PCIe not granted, disabling ASPM
  392. [ 1.582147] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  393. [ 1.582190] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  394. [ 1.582231] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
  395. [ 1.582271] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  396. [ 1.582312] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
  397. [ 1.582354] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
  398. [ 1.582396] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
  399. [ 1.582437] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
  400. [ 1.582549] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  401. [ 1.582554] vgaarb: loaded
  402. [ 1.582555] vgaarb: bridge control possible 0000:01:00.0
  403. [ 1.582650] i2c-core: driver [aat2870] using legacy suspend method
  404. [ 1.582651] i2c-core: driver [aat2870] using legacy resume method
  405. [ 1.582719] SCSI subsystem initialized
  406. [ 1.582765] libata version 3.00 loaded.
  407. [ 1.582802] usbcore: registered new interface driver usbfs
  408. [ 1.582811] usbcore: registered new interface driver hub
  409. [ 1.582835] usbcore: registered new device driver usb
  410. [ 1.582909] PCI: Using ACPI for IRQ routing
  411. [ 1.585234] PCI: pci_cache_line_size set to 64 bytes
  412. [ 1.585466] reserve RAM buffer: 000000000009c000 - 000000000009ffff
  413. [ 1.585468] reserve RAM buffer: 00000000cf65f000 - 00000000cfffffff
  414. [ 1.585564] NetLabel: Initializing
  415. [ 1.585565] NetLabel: domain hash size = 128
  416. [ 1.585566] NetLabel: protocols = UNLABELED CIPSOv4
  417. [ 1.585576] NetLabel: unlabeled traffic allowed by default
  418. [ 1.585623] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  419. [ 1.585629] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  420. [ 1.587645] Switching to clocksource hpet
  421. [ 1.593916] AppArmor: AppArmor Filesystem Enabled
  422. [ 1.593941] pnp: PnP ACPI init
  423. [ 1.593955] ACPI: bus type pnp registered
  424. [ 1.594273] pnp 00:00: [bus 00-3e]
  425. [ 1.594276] pnp 00:00: [io 0x0000-0x0cf7 window]
  426. [ 1.594278] pnp 00:00: [io 0x0cf8-0x0cff]
  427. [ 1.594279] pnp 00:00: [io 0x0d00-0xffff window]
  428. [ 1.594281] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  429. [ 1.594283] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
  430. [ 1.594285] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
  431. [ 1.594287] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
  432. [ 1.594288] pnp 00:00: [mem 0x000cc000-0x000cffff window]
  433. [ 1.594290] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
  434. [ 1.594292] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
  435. [ 1.594294] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
  436. [ 1.594296] pnp 00:00: [mem 0x000dc000-0x000dffff window]
  437. [ 1.594297] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
  438. [ 1.594299] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
  439. [ 1.594301] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
  440. [ 1.594303] pnp 00:00: [mem 0x000ec000-0x000effff window]
  441. [ 1.594304] pnp 00:00: [mem 0x000f0000-0x000fffff window]
  442. [ 1.594306] pnp 00:00: [mem 0xd0000000-0xfeafffff window]
  443. [ 1.594308] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
  444. [ 1.594373] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
  445. [ 1.594396] pnp 00:01: [io 0x0000-0x001f]
  446. [ 1.594398] pnp 00:01: [io 0x0081-0x0091]
  447. [ 1.594400] pnp 00:01: [io 0x0093-0x009f]
  448. [ 1.594401] pnp 00:01: [io 0x00c0-0x00df]
  449. [ 1.594403] pnp 00:01: [dma 4]
  450. [ 1.594426] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
  451. [ 1.594434] pnp 00:02: [mem 0xff000000-0xffffffff]
  452. [ 1.594454] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
  453. [ 1.594515] pnp 00:03: [mem 0xfed00000-0xfed003ff]
  454. [ 1.594537] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
  455. [ 1.594546] pnp 00:04: [io 0x00f0]
  456. [ 1.594557] pnp 00:04: [irq 13]
  457. [ 1.594580] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
  458. [ 1.594591] pnp 00:05: [io 0x002e-0x002f]
  459. [ 1.594593] pnp 00:05: [io 0x004e-0x004f]
  460. [ 1.594595] pnp 00:05: [io 0x0061]
  461. [ 1.594596] pnp 00:05: [io 0x0063]
  462. [ 1.594598] pnp 00:05: [io 0x0065]
  463. [ 1.594599] pnp 00:05: [io 0x0067]
  464. [ 1.594600] pnp 00:05: [io 0x0070]
  465. [ 1.594602] pnp 00:05: [io 0x0080]
  466. [ 1.594603] pnp 00:05: [io 0x0092]
  467. [ 1.594605] pnp 00:05: [io 0x00b2-0x00b3]
  468. [ 1.594606] pnp 00:05: [io 0x0680-0x069f]
  469. [ 1.594608] pnp 00:05: [io 0x1000-0x1003]
  470. [ 1.594610] pnp 00:05: [io 0x1004-0x1013]
  471. [ 1.594611] pnp 00:05: [io 0xffff]
  472. [ 1.594613] pnp 00:05: [io 0x0400-0x047f]
  473. [ 1.594614] pnp 00:05: [io 0x0500-0x057f]
  474. [ 1.594616] pnp 00:05: [io 0x164e-0x164f]
  475. [ 1.594672] system 00:05: [io 0x0680-0x069f] has been reserved
  476. [ 1.594675] system 00:05: [io 0x1000-0x1003] has been reserved
  477. [ 1.594677] system 00:05: [io 0x1004-0x1013] has been reserved
  478. [ 1.594679] system 00:05: [io 0xffff] has been reserved
  479. [ 1.594681] system 00:05: [io 0x0400-0x047f] has been reserved
  480. [ 1.594683] system 00:05: [io 0x0500-0x057f] has been reserved
  481. [ 1.594685] system 00:05: [io 0x164e-0x164f] has been reserved
  482. [ 1.594688] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  483. [ 1.594695] pnp 00:06: [io 0x0070-0x0077]
  484. [ 1.594700] pnp 00:06: [irq 8]
  485. [ 1.594724] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
  486. [ 1.594732] pnp 00:07: [io 0x0060]
  487. [ 1.594734] pnp 00:07: [io 0x0064]
  488. [ 1.594739] pnp 00:07: [irq 1]
  489. [ 1.594761] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
  490. [ 1.607687] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled)
  491. [ 1.607700] pnp 00:09: [irq 12]
  492. [ 1.607725] pnp 00:09: Plug and Play ACPI device, IDs DLL040c PNP0f13 (active)
  493. [ 1.607938] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
  494. [ 1.607940] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
  495. [ 1.607942] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
  496. [ 1.607944] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
  497. [ 1.607945] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
  498. [ 1.607947] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
  499. [ 1.607949] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
  500. [ 1.607950] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
  501. [ 1.607952] pnp 00:0a: [mem 0xff000000-0xffffffff]
  502. [ 1.607954] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
  503. [ 1.607955] pnp 00:0a: [mem 0xe82b0000-0xe82b0fff]
  504. [ 1.608006] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
  505. [ 1.608008] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
  506. [ 1.608011] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
  507. [ 1.608013] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
  508. [ 1.608015] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
  509. [ 1.608017] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
  510. [ 1.608020] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
  511. [ 1.608022] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
  512. [ 1.608024] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
  513. [ 1.608026] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
  514. [ 1.608029] system 00:0a: [mem 0xe82b0000-0xe82b0fff] has been reserved
  515. [ 1.608031] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
  516. [ 1.608724] pnp 00:0b: [irq 23]
  517. [ 1.608762] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
  518. [ 1.619707] pnp 00:0c: [bus 3f]
  519. [ 1.619759] pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active)
  520. [ 1.631901] pnp: PnP ACPI: found 13 devices
  521. [ 1.631904] ACPI: ACPI bus type pnp unregistered
  522. [ 1.631907] PnPBIOS: Disabled by ACPI PNP
  523. [ 1.668713] PCI: max bus depth: 1 pci_try_num: 2
  524. [ 1.668763] pci 0000:00:1c.2: BAR 15: assigned [mem 0xe8300000-0xe84fffff 64bit pref]
  525. [ 1.668767] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe8500000-0xe86fffff 64bit pref]
  526. [ 1.668770] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe8700000-0xe88fffff 64bit pref]
  527. [ 1.668773] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  528. [ 1.668775] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
  529. [ 1.668778] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe30fffff]
  530. [ 1.668783] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  531. [ 1.668786] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
  532. [ 1.668792] pci 0000:00:1c.0: bridge window [mem 0xe6e00000-0xe81fffff]
  533. [ 1.668797] pci 0000:00:1c.0: bridge window [mem 0xe8700000-0xe88fffff 64bit pref]
  534. [ 1.668805] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  535. [ 1.668808] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
  536. [ 1.668814] pci 0000:00:1c.1: bridge window [mem 0xe5a00000-0xe6dfffff]
  537. [ 1.668819] pci 0000:00:1c.1: bridge window [mem 0xe8500000-0xe86fffff 64bit pref]
  538. [ 1.668826] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
  539. [ 1.668830] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
  540. [ 1.668836] pci 0000:00:1c.2: bridge window [mem 0xe3100000-0xe59fffff]
  541. [ 1.668841] pci 0000:00:1c.2: bridge window [mem 0xe8300000-0xe84fffff 64bit pref]
  542. [ 1.668849] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
  543. [ 1.671490] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  544. [ 1.671500] pci 0000:00:01.0: setting latency timer to 64
  545. [ 1.671516] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  546. [ 1.671522] pci 0000:00:1c.0: setting latency timer to 64
  547. [ 1.671689] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  548. [ 1.671696] pci 0000:00:1c.1: setting latency timer to 64
  549. [ 1.675490] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  550. [ 1.675504] pci 0000:00:1c.2: setting latency timer to 64
  551. [ 1.675514] pci 0000:00:1e.0: setting latency timer to 64
  552. [ 1.675520] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  553. [ 1.675523] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  554. [ 1.675526] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  555. [ 1.675529] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff]
  556. [ 1.675533] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
  557. [ 1.675536] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xe30fffff]
  558. [ 1.675539] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
  559. [ 1.675542] pci_bus 0000:02: resource 1 [mem 0xe6e00000-0xe81fffff]
  560. [ 1.675546] pci_bus 0000:02: resource 2 [mem 0xe8700000-0xe88fffff 64bit pref]
  561. [ 1.675549] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
  562. [ 1.675552] pci_bus 0000:03: resource 1 [mem 0xe5a00000-0xe6dfffff]
  563. [ 1.675556] pci_bus 0000:03: resource 2 [mem 0xe8500000-0xe86fffff 64bit pref]
  564. [ 1.675559] pci_bus 0000:04: resource 0 [io 0x2000-0x3fff]
  565. [ 1.675562] pci_bus 0000:04: resource 1 [mem 0xe3100000-0xe59fffff]
  566. [ 1.675565] pci_bus 0000:04: resource 2 [mem 0xe8300000-0xe84fffff 64bit pref]
  567. [ 1.675569] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
  568. [ 1.675572] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
  569. [ 1.675575] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
  570. [ 1.675578] pci_bus 0000:06: resource 7 [mem 0xd0000000-0xfeafffff]
  571. [ 1.675612] NET: Registered protocol family 2
  572. [ 1.675669] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  573. [ 1.675827] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  574. [ 1.676380] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  575. [ 1.676655] TCP: Hash tables configured (established 131072 bind 65536)
  576. [ 1.676657] TCP reno registered
  577. [ 1.676659] UDP hash table entries: 512 (order: 2, 16384 bytes)
  578. [ 1.676668] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  579. [ 1.676729] NET: Registered protocol family 1
  580. [ 1.679487] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  581. [ 1.679519] pci 0000:00:1a.0: PCI INT A disabled
  582. [ 1.679756] pci 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  583. [ 1.679778] pci 0000:00:1d.0: PCI INT A disabled
  584. [ 1.679814] pci 0000:01:00.0: Boot video device
  585. [ 1.679905] PCI: CLS 64 bytes, default 64
  586. [ 1.679908] DMAR: Host address width 36
  587. [ 1.679910] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
  588. [ 1.679917] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
  589. [ 1.679919] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
  590. [ 1.679924] IOMMU 1: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
  591. [ 1.679925] DMAR: RMRR base: 0x000000cf7d7000 end: 0x000000cf7e6fff
  592. [ 1.679934] Simple Boot Flag at 0xf1 set to 0x1
  593. [ 1.680389] audit: initializing netlink socket (disabled)
  594. [ 1.680397] type=2000 audit(1363361108.528:1): initialized
  595. [ 1.700860] highmem bounce pool size: 64 pages
  596. [ 1.700864] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  597. [ 1.703506] VFS: Disk quotas dquot_6.5.2
  598. [ 1.703557] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  599. [ 1.704031] fuse init (API version 7.17)
  600. [ 1.704121] msgmni has been set to 1550
  601. [ 1.704523] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  602. [ 1.704557] io scheduler noop registered
  603. [ 1.704559] io scheduler deadline registered
  604. [ 1.704565] io scheduler cfq registered (default)
  605. [ 1.704653] pcieport 0000:00:01.0: setting latency timer to 64
  606. [ 1.704681] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
  607. [ 1.704890] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  608. [ 1.704910] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  609. [ 1.704961] intel_idle: MWAIT substates: 0x1120
  610. [ 1.704962] intel_idle: v0.4 model 0x25
  611. [ 1.704964] intel_idle: lapic_timer_reliable_states 0xffffffff
  612. [ 1.705303] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  613. [ 1.705602] ACPI: AC Adapter [AC] (on-line)
  614. [ 1.705715] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
  615. [ 1.706147] ACPI: Lid Switch [LID]
  616. [ 1.706185] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
  617. [ 1.706189] ACPI: Power Button [PBTN]
  618. [ 1.706225] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
  619. [ 1.706229] ACPI: Sleep Button [SBTN]
  620. [ 1.706385] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
  621. [ 1.706388] ACPI: Power Button [PWRF]
  622. [ 1.931465] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  623. [ 1.931473] ACPI: Battery Slot [BAT0] (battery present)
  624. [ 1.931480] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  625. [ 1.931487] ACPI: Battery Slot [BAT1] (battery absent)
  626. [ 1.931506] ERST: Table is not found!
  627. [ 1.931507] GHES: HEST is not enabled!
  628. [ 1.931603] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  629. [ 1.931651] isapnp: Scanning for PnP cards...
  630. [ 2.286426] isapnp: No Plug & Play device found
  631. [ 2.330957] ACPI: Battery Slot [BAT1] (battery absent)
  632. [ 2.338841] ACPI: Battery Slot [BAT0] (battery present)
  633. [ 2.370677] Linux agpgart interface v0.103
  634. [ 2.372135] brd: module loaded
  635. [ 2.372845] loop: module loaded
  636. [ 2.372973] ata_piix 0000:00:1f.2: version 2.13
  637. [ 2.372986] ata_piix 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  638. [ 2.372991] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
  639. [ 2.526003] ata_piix 0000:00:1f.2: setting latency timer to 64
  640. [ 2.526264] scsi0 : ata_piix
  641. [ 2.526345] scsi1 : ata_piix
  642. [ 2.530047] ata1: SATA max UDMA/133 cmd 0x70f0 ctl 0x70e0 bmdma 0x70b0 irq 18
  643. [ 2.530054] ata2: SATA max UDMA/133 cmd 0x70d0 ctl 0x70c0 bmdma 0x70b8 irq 18
  644. [ 2.530072] ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  645. [ 2.530079] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
  646. [ 2.677715] Refined TSC clocksource calibration: 2393.999 MHz.
  647. [ 2.677722] Switching to clocksource tsc
  648. [ 2.685701] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
  649. [ 2.685718] ata_piix 0000:00:1f.5: setting latency timer to 64
  650. [ 2.685908] scsi2 : ata_piix
  651. [ 2.685962] scsi3 : ata_piix
  652. [ 2.685999] ata3: SATA max UDMA/133 cmd 0x7090 ctl 0x7080 bmdma 0x7050 irq 18
  653. [ 2.686002] ata4: SATA max UDMA/133 cmd 0x7070 ctl 0x7060 bmdma 0x7058 irq 18
  654. [ 2.686318] Fixed MDIO Bus: probed
  655. [ 2.686334] tun: Universal TUN/TAP device driver, 1.6
  656. [ 2.686335] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  657. [ 2.686375] PPP generic driver version 2.4.2
  658. [ 2.686447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  659. [ 2.686461] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  660. [ 2.686474] ehci_hcd 0000:00:1a.0: setting latency timer to 64
  661. [ 2.686477] ehci_hcd 0000:00:1a.0: EHCI Host Controller
  662. [ 2.686510] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  663. [ 2.686537] ehci_hcd 0000:00:1a.0: debug port 2
  664. [ 2.690411] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
  665. [ 2.690425] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe8260000
  666. [ 2.705656] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  667. [ 2.705800] hub 1-0:1.0: USB hub found
  668. [ 2.705803] hub 1-0:1.0: 2 ports detected
  669. [ 2.705857] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  670. [ 2.705870] ehci_hcd 0000:00:1d.0: setting latency timer to 64
  671. [ 2.705874] ehci_hcd 0000:00:1d.0: EHCI Host Controller
  672. [ 2.705907] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  673. [ 2.705932] ehci_hcd 0000:00:1d.0: debug port 2
  674. [ 2.709816] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
  675. [ 2.709829] ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe8240000
  676. [ 2.725621] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  677. [ 2.725749] hub 2-0:1.0: USB hub found
  678. [ 2.725752] hub 2-0:1.0: 2 ports detected
  679. [ 2.725805] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  680. [ 2.725816] uhci_hcd: USB Universal Host Controller Interface driver
  681. [ 2.725857] usbcore: registered new interface driver libusual
  682. [ 2.725895] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  683. [ 2.726329] i8042: Warning: Keylock active
  684. [ 2.727679] serio: i8042 KBD port at 0x60,0x64 irq 1
  685. [ 2.727684] serio: i8042 AUX port at 0x60,0x64 irq 12
  686. [ 2.727778] mousedev: PS/2 mouse device common for all mice
  687. [ 2.727938] rtc_cmos 00:06: RTC can wake from S4
  688. [ 2.728055] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
  689. [ 2.728099] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
  690. [ 2.728144] device-mapper: uevent: version 1.0.3
  691. [ 2.728208] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  692. [ 2.728235] EISA: Probing bus 0 at eisa.0
  693. [ 2.728237] EISA: Cannot allocate resource for mainboard
  694. [ 2.728239] Cannot allocate resource for EISA slot 1
  695. [ 2.728240] Cannot allocate resource for EISA slot 2
  696. [ 2.728241] Cannot allocate resource for EISA slot 3
  697. [ 2.728243] Cannot allocate resource for EISA slot 4
  698. [ 2.728244] Cannot allocate resource for EISA slot 5
  699. [ 2.728245] Cannot allocate resource for EISA slot 6
  700. [ 2.728246] Cannot allocate resource for EISA slot 7
  701. [ 2.728248] Cannot allocate resource for EISA slot 8
  702. [ 2.728249] EISA: Detected 0 cards.
  703. [ 2.728255] cpufreq-nforce2: No nForce2 chipset.
  704. [ 2.728364] cpuidle: using governor ladder
  705. [ 2.728527] cpuidle: using governor menu
  706. [ 2.728528] EFI Variables Facility v0.08 2004-May-17
  707. [ 2.728713] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
  708. [ 2.728843] TCP cubic registered
  709. [ 2.728936] NET: Registered protocol family 10
  710. [ 2.729301] NET: Registered protocol family 17
  711. [ 2.729304] Registering the dns_resolver key type
  712. [ 2.729323] Using IPI No-Shortcut mode
  713. [ 2.729581] PM: Hibernation image not present or could not be loaded.
  714. [ 2.729591] registered taskstats version 1
  715. [ 2.741146] Magic number: 5:74:437
  716. [ 2.741285] rtc_cmos 00:06: setting system clock to 2013-03-15 15:25:10 UTC (1363361110)
  717. [ 2.742309] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  718. [ 2.742311] EDD information not available.
  719. [ 3.017237] usb 1-1: new high-speed USB device number 2 using ehci_hcd
  720. [ 3.149798] hub 1-1:1.0: USB hub found
  721. [ 3.150011] hub 1-1:1.0: 6 ports detected
  722. [ 3.260775] usb 2-1: new high-speed USB device number 2 using ehci_hcd
  723. [ 3.393390] hub 2-1:1.0: USB hub found
  724. [ 3.393578] hub 2-1:1.0: 8 ports detected
  725. [ 3.664259] usb 2-1.3: new low-speed USB device number 3 using ehci_hcd
  726. [ 3.835963] usb 2-1.8: new full-speed USB device number 4 using ehci_hcd
  727. [ 3.875707] ata1.01: failed to resume link (SControl 0)
  728. [ 3.879697] ata2.01: failed to resume link (SControl 0)
  729. [ 3.954558] usb 2-1.8: config 0 descriptor??
  730. [ 4.031525] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  731. [ 4.031547] ata1.01: SATA link down (SStatus 4 SControl 0)
  732. [ 4.035514] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  733. [ 4.035536] ata2.01: SATA link down (SStatus 4 SControl 0)
  734. [ 4.039916] ata1.00: ATA-9: M4-CT128M4SSD2, 0309, max UDMA/100
  735. [ 4.039922] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 0/32)
  736. [ 4.044374] ata2.00: ATA-8: WDC WD2500BEKT-75A25T0, 01.01A01, max UDMA/133
  737. [ 4.044380] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  738. [ 4.047897] ata1.00: configured for UDMA/100
  739. [ 4.048245] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 0309 PQ: 0 ANSI: 5
  740. [ 4.048561] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
  741. [ 4.048569] sd 0:0:0:0: Attached scsi generic sg0 type 0
  742. [ 4.048860] sd 0:0:0:0: [sda] Write Protect is off
  743. [ 4.048865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  744. [ 4.048989] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  745. [ 4.050817] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
  746. [ 4.052226] sd 0:0:0:0: [sda] Attached SCSI disk
  747. [ 4.060330] ata2.00: configured for UDMA/133
  748. [ 4.060611] scsi 1:0:0:0: Direct-Access ATA WDC WD2500BEKT-7 01.0 PQ: 0 ANSI: 5
  749. [ 4.060871] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  750. [ 4.060878] sd 1:0:0:0: Attached scsi generic sg1 type 0
  751. [ 4.061016] sd 1:0:0:0: [sdb] Write Protect is off
  752. [ 4.061021] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  753. [ 4.061180] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  754. [ 4.353235] sdb: sdb1 sdb3 < sdb5 sdb6 >
  755. [ 4.354463] sd 1:0:0:0: [sdb] Attached SCSI disk
  756. [ 4.354707] Freeing unused kernel memory: 740k freed
  757. [ 4.354995] Write protecting the kernel text: 5828k
  758. [ 4.355050] Write protecting the kernel read-only data: 2380k
  759. [ 4.355052] NX-protecting the kernel data: 4412k
  760. [ 4.374591] udevd[106]: starting version 175
  761. [ 4.419876] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
  762. [ 4.419880] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
  763. [ 4.423119] sdhci: Secure Digital Host Controller Interface driver
  764. [ 4.423122] sdhci: Copyright(c) Pierre Ossman
  765. [ 4.423563] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 3)
  766. [ 4.426918] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  767. [ 4.426932] e1000e 0000:00:19.0: setting latency timer to 64
  768. [ 4.427080] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
  769. [ 4.427182] sdhci-pci 0000:04:00.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  770. [ 4.427261] sdhci-pci 0000:04:00.0: setting latency timer to 64
  771. [ 4.427290] mmc0: no vmmc regulator found
  772. [ 4.427372] Registered led device: mmc0::
  773. [ 4.428512] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
  774. [ 4.431784] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
  775. [ 4.431950] generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.0-1.3/input0
  776. [ 4.431973] usbcore: registered new interface driver usbhid
  777. [ 4.431975] usbhid: USB HID core driver
  778. [ 4.659161] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 5c:26:0a:18:3e:73
  779. [ 4.659164] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
  780. [ 4.659212] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 5051FF-0FF
  781. [ 5.082065] acpi device:02: registered as cooling_device4
  782. [ 5.153672] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
  783. [ 5.153801] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
  784. [ 6.366147] vesafb: mode is 1360x768x32, linelength=5440, pages=0
  785. [ 6.366150] vesafb: scrolling: redraw
  786. [ 6.366153] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  787. [ 6.367790] vesafb: framebuffer at 0xe1000000, mapped to 0xf8580000, using 4096k, total 4096k
  788. [ 6.368007] fbcon: VESA VGA (fb0) is primary device
  789. [ 6.368096] Console: switching to colour frame buffer device 170x48
  790. [ 6.368122] fb0: VESA VGA frame buffer device
  791. [ 6.661312] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
  792. [ 6.661316] EXT4-fs (sda1): write access will be enabled during recovery
  793. [ 7.237386] EXT4-fs (sda1): recovery complete
  794. [ 7.237641] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  795. [ 7.559948] Adding 999420k swap on /dev/sda6. Priority:-1 extents:1 across:999420k SS
  796. [ 7.738239] ADDRCONF(NETDEV_UP): eth0: link is not ready
  797. [ 7.743779] udevd[427]: starting version 175
  798. [ 7.803482] lp: driver loaded but no devices found
  799. [ 7.973334] wmi: Mapper loaded
  800. [ 7.991589] cfg80211: Calling CRDA to update world regulatory domain
  801. [ 8.009882] parport_pc 00:08: [io 0x0378-0x037b]
  802. [ 8.010027] parport_pc 00:08: [irq 5]
  803. [ 8.034244] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
  804. [ 8.034261] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  805. [ 8.034299] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
  806. [ 8.038010] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
  807. [ 8.048853] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
  808. [ 8.048857] Copyright(c) 2003-2011 Intel Corporation
  809. [ 8.056561] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  810. [ 8.056615] iwlwifi 0000:03:00.0: setting latency timer to 64
  811. [ 8.056843] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
  812. [ 8.056846] iwlwifi 0000:03:00.0: pci_resource_base = f8440000
  813. [ 8.056849] iwlwifi 0000:03:00.0: HW Revision ID = 0x35
  814. [ 8.057096] iwlwifi 0000:03:00.0: irq 42 for MSI/MSI-X
  815. [ 8.057269] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
  816. [ 8.057425] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
  817. [ 8.074725] iwlwifi 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6
  818. [ 8.074729] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
  819. [ 8.074767] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
  820. [ 8.074956] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
  821. [ 8.076102] nvidia: module license 'NVIDIA' taints kernel.
  822. [ 8.076106] Disabling lock debugging due to kernel taint
  823. [ 8.087722] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
  824. [ 8.108192] type=1400 audit(1363357515.869:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=591 comm="apparmor_parser"
  825. [ 8.108763] type=1400 audit(1363357515.873:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=591 comm="apparmor_parser"
  826. [ 8.109189] type=1400 audit(1363357515.873:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=591 comm="apparmor_parser"
  827. [ 8.111413] type=1400 audit(1363357515.873:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=685 comm="apparmor_parser"
  828. [ 8.111943] type=1400 audit(1363357515.873:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=685 comm="apparmor_parser"
  829. [ 8.112257] type=1400 audit(1363357515.873:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=685 comm="apparmor_parser"
  830. [ 8.169298] input: Dell WMI hotkeys as /devices/virtual/input/input7
  831. [ 8.181360] cfg80211: World regulatory domain updated:
  832. [ 8.181363] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  833. [ 8.181366] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  834. [ 8.181369] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  835. [ 8.181372] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  836. [ 8.181375] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  837. [ 8.181378] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  838. [ 8.183194] ppdev: user-space parallel port driver
  839. [ 8.244423] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  840. [ 8.244435] nvidia 0000:01:00.0: setting latency timer to 64
  841. [ 8.244440] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
  842. [ 8.244567] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012
  843. [ 8.254998] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
  844. [ 8.255271] Registered led device: phy0-led
  845. [ 8.255303] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  846. [ 8.261950] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
  847. [ 8.264195] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  848. [ 8.264271] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
  849. [ 8.264307] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
  850. [ 8.322040] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
  851. [ 8.322266] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  852. [ 8.322269] hda_intel: Disabling MSI
  853. [ 8.322305] snd_hda_intel 0000:01:00.1: setting latency timer to 64
  854. [ 8.739441] parport_pc 00:08: activated
  855. [ 8.739447] parport_pc 00:08: reported by Plug and Play ACPI
  856. [ 8.739546] parport_pc 00:08: disabled
  857. [ 8.931691] EXT4-fs (sda1): re-mounted. Opts: commit=120,errors=remount-ro
  858. [ 9.010935] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
  859. [ 9.048556] EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
  860. [ 9.049692] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: commit=120,errors=remount-ro
  861. [ 9.158576] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
  862. [ 9.190604] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
  863. [ 9.214448] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
  864. [ 9.238393] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
  865. [ 9.238478] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
  866. [ 9.238569] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
  867. [ 9.238637] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
  868. [ 9.238702] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
  869. [ 9.242057] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input13
  870. [ 9.255569] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input14
  871. [ 9.514599] init: failsafe main process (920) killed by TERM signal
  872. [ 9.555212] Bluetooth: Core ver 2.16
  873. [ 9.555238] NET: Registered protocol family 31
  874. [ 9.555240] Bluetooth: HCI device and connection manager initialized
  875. [ 9.555243] Bluetooth: HCI socket layer initialized
  876. [ 9.555245] Bluetooth: L2CAP socket layer initialized
  877. [ 9.555656] Bluetooth: SCO socket layer initialized
  878. [ 9.559703] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  879. [ 9.559706] Bluetooth: BNEP filters: protocol multicast
  880. [ 9.565452] type=1400 audit(1363357517.329:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1000 comm="apparmor_parser"
  881. [ 9.566225] type=1400 audit(1363357517.333:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1000 comm="apparmor_parser"
  882. [ 9.593841] Bluetooth: RFCOMM TTY layer initialized
  883. [ 9.593847] Bluetooth: RFCOMM socket layer initialized
  884. [ 9.593849] Bluetooth: RFCOMM ver 1.11
  885. [ 9.600157] type=1400 audit(1363357517.365:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1027 comm="apparmor_parser"
  886. [ 9.601228] type=1400 audit(1363357517.365:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1028 comm="apparmor_parser"
  887. [ 9.749476] init: gdm main process (1134) killed by TERM signal
  888. [ 9.761761] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
  889. [ 9.817540] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
  890. [ 9.817952] ADDRCONF(NETDEV_UP): eth0: link is not ready
  891. [ 9.818433] ADDRCONF(NETDEV_UP): eth0: link is not ready
  892. [ 9.819758] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  893. [ 11.472384] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
  894. [ 11.472389] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
  895. [ 11.472560] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  896. [ 21.569310] eth0: no IPv6 routers present
  897. [ 676.203431] audit_printk_skb: 60 callbacks suppressed
  898. [ 676.203435] type=1400 audit(1363358184.845:32): apparmor="DENIED" operation="chmod" parent=1 profile="/usr/bin/evince" name="/tmp/at-spi2/" pid=3085 comm="evince" requested_mask="w" denied_mask="w" fsuid=1000 ouid=118
  899. [ 2662.804427] PM: Syncing filesystems ... done.
  900. [ 2662.807323] PM: Preparing system for mem sleep
  901. [ 2662.807342] Freezing user space processes ... (elapsed 0.01 seconds) done.
  902. [ 2662.823785] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  903. [ 2662.839740] PM: Entering mem sleep
  904. [ 2662.839830] Suspending console(s) (use no_console_suspend to debug)
  905. [ 2662.840114] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
  906. [ 2662.840446] sd 1:0:0:0: [sdb] Stopping disk
  907. [ 2662.840469] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  908. [ 2662.842677] sd 0:0:0:0: [sda] Stopping disk
  909. [ 2662.855084] ata_piix 0000:00:1f.5: PCI INT C disabled
  910. [ 2662.855912] sdhci-pci 0000:04:00.0: PCI INT B disabled
  911. [ 2662.887569] ehci_hcd 0000:00:1d.0: PCI INT A disabled
  912. [ 2662.934335] e1000e 0000:00:19.0: PCI INT A disabled
  913. [ 2662.934347] e1000e 0000:00:19.0: PME# enabled
  914. [ 2662.934357] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
  915. [ 2662.947550] ehci_hcd 0000:00:1a.0: PCI INT A disabled
  916. [ 2662.956940] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
  917. [ 2662.971506] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 116.565 msecs
  918. [ 2663.298960] snd_hda_intel 0000:01:00.1: PCI INT A disabled
  919. [ 2663.299031] ACPI handle has no context!
  920. [ 2663.314904] PM: suspend of drv:snd_hda_intel dev:0000:01:00.1 complete after 460.864 msecs
  921. [ 2663.314969] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 460.523 msecs
  922. [ 2663.337197] PM: suspend of drv:sd dev:0:0:0:0 complete after 497.589 msecs
  923. [ 2663.337267] PM: suspend of drv:scsi dev:target0:0:0 complete after 497.606 msecs
  924. [ 2663.337290] PM: suspend of drv:scsi dev:host0 complete after 483.648 msecs
  925. [ 2663.411651] PM: suspend of drv:sd dev:1:0:0:0 complete after 572.525 msecs
  926. [ 2663.411714] PM: suspend of drv:scsi dev:target1:0:0 complete after 572.526 msecs
  927. [ 2663.411734] PM: suspend of drv:scsi dev:host1 complete after 558.240 msecs
  928. [ 2663.412022] ata_piix 0000:00:1f.2: PCI INT C disabled
  929. [ 2663.426712] PM: suspend of drv:ata_piix dev:0000:00:1f.2 complete after 572.762 msecs
  930. [ 2663.426774] PM: suspend of drv: dev:pci0000:00 complete after 571.790 msecs
  931. [ 2663.426831] PM: suspend of devices complete after 587.895 msecs
  932. [ 2663.426837] PM: suspend devices took 0.588 seconds
  933. [ 2663.442919] ehci_hcd 0000:00:1d.0: PME# enabled
  934. [ 2663.442926] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
  935. [ 2663.458705] ehci_hcd 0000:00:1a.0: PME# enabled
  936. [ 2663.458717] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
  937. [ 2663.474682] PM: late suspend of devices complete after 47.924 msecs
  938. [ 2663.474828] ACPI: Preparing to enter system sleep state S3
  939. [ 2663.518759] PM: Saving platform NVS memory
  940. [ 2663.519641] Disabling non-boot CPUs ...
  941. [ 2663.622348] CPU 1 is now offline
  942. [ 2663.726223] CPU 2 is now offline
  943. [ 2663.727379] Broke affinity for irq 1
  944. [ 2663.830028] CPU 3 is now offline
  945. [ 2663.830450] Extended CMOS year: 2000
  946. [ 2663.830669] ACPI: Low-level resume complete
  947. [ 2663.830727] PM: Restoring platform NVS memory
  948. [ 2663.831238] CPU0: Thermal monitoring handled by SMI
  949. [ 2663.831298] Extended CMOS year: 2000
  950. [ 2663.831330] Enabling non-boot CPUs ...
  951. [ 2663.831472] Booting Node 0 Processor 1 APIC 0x4
  952. [ 2663.831473] smpboot cpu 1: start_ip = 98000
  953. [ 2663.841675] Initializing CPU#1
  954. [ 2663.842482] Calibrating delay loop (skipped) already calibrated this CPU
  955. [ 2663.842503] CPU1: Thermal monitoring handled by SMI
  956. [ 2663.862806] NMI watchdog enabled, takes one hw-pmu counter.
  957. [ 2663.863092] CPU1 is up
  958. [ 2663.863159] Booting Node 0 Processor 2 APIC 0x1
  959. [ 2663.863160] smpboot cpu 2: start_ip = 98000
  960. [ 2663.873282] Initializing CPU#2
  961. [ 2663.874169] Calibrating delay loop (skipped) already calibrated this CPU
  962. [ 2663.874191] CPU2: Thermal monitoring handled by SMI
  963. [ 2663.894573] NMI watchdog enabled, takes one hw-pmu counter.
  964. [ 2663.894876] CPU2 is up
  965. [ 2663.894951] Booting Node 0 Processor 3 APIC 0x5
  966. [ 2663.894952] smpboot cpu 3: start_ip = 98000
  967. [ 2663.905073] Initializing CPU#3
  968. [ 2663.905960] Calibrating delay loop (skipped) already calibrated this CPU
  969. [ 2663.905980] CPU3: Thermal monitoring handled by SMI
  970. [ 2663.926498] NMI watchdog enabled, takes one hw-pmu counter.
  971. [ 2663.926888] CPU3 is up
  972. [ 2663.929580] ACPI: Waking up from system sleep state S3
  973. [ 2663.930660] intel ips 0000:00:1f.6: MCP limit exceeded: Avg temp 15670, limit 9000
  974. [ 2664.118681] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
  975. [ 2664.118718] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
  976. [ 2664.118740] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
  977. [ 2664.118770] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
  978. [ 2664.118788] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xe8260000)
  979. [ 2664.118795] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
  980. [ 2664.118815] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
  981. [ 2664.118820] ehci_hcd 0000:00:1a.0: PME# disabled
  982. [ 2664.118838] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
  983. [ 2664.118855] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xe8250004)
  984. [ 2664.118860] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  985. [ 2664.118866] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
  986. [ 2664.118899] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
  987. [ 2664.118910] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xe881e871)
  988. [ 2664.118921] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
  989. [ 2664.118927] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
  990. [ 2664.118964] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
  991. [ 2664.118975] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xe861e851)
  992. [ 2664.118986] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
  993. [ 2664.118992] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
  994. [ 2664.119029] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30a)
  995. [ 2664.119040] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0xe841e831)
  996. [ 2664.119051] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
  997. [ 2664.119057] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
  998. [ 2664.119091] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
  999. [ 2664.119108] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xe8240000)
  1000. [ 2664.119116] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
  1001. [ 2664.119133] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
  1002. [ 2664.119137] ehci_hcd 0000:00:1d.0: PME# disabled
  1003. [ 2664.119262] pci 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800003)
  1004. [ 2664.119279] ata_piix 0000:00:1f.5: restoring config space at offset 0xf (was 0x300, writing 0x30a)
  1005. [ 2664.119290] ata_piix 0000:00:1f.5: restoring config space at offset 0x9 (was 0x1, writing 0x7041)
  1006. [ 2664.119296] ata_piix 0000:00:1f.5: restoring config space at offset 0x7 (was 0x1, writing 0x7061)
  1007. [ 2664.119300] ata_piix 0000:00:1f.5: restoring config space at offset 0x6 (was 0x1, writing 0x7071)
  1008. [ 2664.119305] ata_piix 0000:00:1f.5: restoring config space at offset 0x5 (was 0x1, writing 0x7081)
  1009. [ 2664.119309] ata_piix 0000:00:1f.5: restoring config space at offset 0x4 (was 0x1, writing 0x7091)
  1010. [ 2664.119317] ata_piix 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00005)
  1011. [ 2664.119358] intel ips 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
  1012. [ 2664.119389] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0xe3000000, writing 0x0)
  1013. [ 2664.119398] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x800010, writing 0x800000)
  1014. [ 2664.119441] snd_hda_intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
  1015. [ 2664.119510] iwlwifi 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
  1016. [ 2664.119562] iwlwifi 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe5a00004)
  1017. [ 2664.119589] iwlwifi 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  1018. [ 2664.119619] iwlwifi 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
  1019. [ 2664.119779] sdhci-pci 0000:04:00.0: restoring config space at offset 0xf (was 0x200, writing 0x20a)
  1020. [ 2664.119805] sdhci-pci 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe5940000)
  1021. [ 2664.119815] sdhci-pci 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
  1022. [ 2664.119852] sdhci-pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
  1023. [ 2664.119994] PM: early resume of devices complete after 1.401 msecs
  1024. [ 2664.120171] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
  1025. [ 2664.120180] e1000e 0000:00:19.0: PME# disabled
  1026. [ 2664.120186] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  1027. [ 2664.120196] ehci_hcd 0000:00:1a.0: setting latency timer to 64
  1028. [ 2664.120227] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  1029. [ 2664.120237] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
  1030. [ 2664.120298] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  1031. [ 2664.120302] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
  1032. [ 2664.120310] ehci_hcd 0000:00:1d.0: setting latency timer to 64
  1033. [ 2664.120312] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
  1034. [ 2664.120339] pci 0000:00:1e.0: setting latency timer to 64
  1035. [ 2664.120351] ata_piix 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  1036. [ 2664.120357] ata_piix 0000:00:1f.2: setting latency timer to 64
  1037. [ 2664.120368] ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  1038. [ 2664.120376] ata_piix 0000:00:1f.5: setting latency timer to 64
  1039. [ 2664.120393] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  1040. [ 2664.120402] snd_hda_intel 0000:01:00.1: setting latency timer to 64
  1041. [ 2664.120628] sdhci-pci 0000:04:00.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  1042. [ 2664.120652] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
  1043. [ 2664.123907] sd 0:0:0:0: [sda] Starting disk
  1044. [ 2664.123944] sd 1:0:0:0: [sdb] Starting disk
  1045. [ 2664.298051] PM: resume of drv:hub dev:2-1:1.0 complete after 176.025 msecs
  1046. [ 2664.298056] PM: resume of drv: dev:ep_00 complete after 176.021 msecs
  1047. [ 2664.298065] PM: resume of drv: dev:ep_81 complete after 176.038 msecs
  1048. [ 2664.302075] PM: resume of drv:hub dev:1-1:1.0 complete after 180.078 msecs
  1049. [ 2664.302082] PM: resume of drv: dev:ep_00 complete after 180.071 msecs
  1050. [ 2664.302085] PM: resume of drv: dev:ep_81 complete after 180.079 msecs
  1051. [ 2664.346397] PM: resume of drv:usb dev:2-1.8:0.0 complete after 223.100 msecs
  1052. [ 2664.346401] PM: resume of drv:usb dev:2-1.8:0.1 complete after 222.993 msecs
  1053. [ 2664.346411] PM: resume of drv: dev:ep_81 complete after 223.087 msecs
  1054. [ 2664.346414] PM: resume of drv: dev:ep_01 complete after 223.064 msecs
  1055. [ 2664.346417] PM: resume of drv: dev:ep_85 complete after 223.040 msecs
  1056. [ 2664.346420] PM: resume of drv: dev:ep_82 complete after 222.992 msecs
  1057. [ 2664.346430] PM: resume of drv: dev:ep_02 complete after 222.980 msecs
  1058. [ 2664.346433] PM: resume of drv: dev:ep_00 complete after 222.932 msecs
  1059. [ 2664.346436] PM: resume of drv: dev:ep_86 complete after 222.961 msecs
  1060. [ 2664.554951] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 435.330 msecs
  1061. [ 2664.557806] usb 2-1.3: reset low-speed USB device number 3 using ehci_hcd
  1062. [ 2664.557935] PM: resume of drv:button dev:PNP0C0D:00 complete after 438.460 msecs
  1063. [ 2664.621531] sdhci-pci 0000:04:00.0: setting latency timer to 64
  1064. [ 2664.621647] PM: resume of drv:sdhci-pci dev:0000:04:00.0 complete after 502.033 msecs
  1065. [ 2664.806092] PM: resume of drv:battery dev:PNP0C0A:01 complete after 199.444 msecs
  1066. [ 2664.806717] Extended CMOS year: 2000
  1067. [ 2664.846639] PM: resume of drv:usbhid dev:2-1.3:1.0 complete after 725.539 msecs
  1068. [ 2664.846647] PM: resume of drv: dev:ep_00 complete after 725.532 msecs
  1069. [ 2664.846673] PM: resume of drv: dev:ep_81 complete after 725.570 msecs
  1070. [ 2665.464007] ata1.01: failed to resume link (SControl 0)
  1071. [ 2665.464102] ata2.01: failed to resume link (SControl 0)
  1072. [ 2665.619830] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1073. [ 2665.619850] ata1.01: SATA link down (SStatus 4 SControl 0)
  1074. [ 2665.639070] ata1.00: configured for UDMA/100
  1075. [ 2665.639601] PM: resume of drv:sd dev:0:0:0:0 complete after 1518.306 msecs
  1076. [ 2665.639653] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1518.342 msecs
  1077. [ 2665.639670] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 834.263 msecs
  1078. [ 2666.458412] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1079. [ 2666.458437] ata2.01: SATA link down (SStatus 4 SControl 0)
  1080. [ 2666.643072] ata2.00: configured for UDMA/133
  1081. [ 2666.649237] PM: resume of drv:sd dev:1:0:0:0 complete after 2529.645 msecs
  1082. [ 2666.649356] PM: resume of drv:scsi_disk dev:1:0:0:0 complete after 1011.414 msecs
  1083. [ 2666.649360] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 2529.746 msecs
  1084. [ 2666.651244] PM: resume of devices complete after 2535.497 msecs
  1085. [ 2666.651317] PM: resume devices took 2.536 seconds
  1086. [ 2666.651346] PM: Finishing wakeup.
  1087. [ 2666.651347] Restarting tasks ... done.
  1088. [ 2666.668188] video LNXVIDEO:00: Restoring backlight state
  1089. [ 2666.729864] usb 2-1.7: new full-speed USB device number 5 using ehci_hcd
  1090. [ 2666.746214] hub 2-1:1.0: unable to enumerate USB device on port 7
  1091. [ 2667.344993] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
  1092. [ 2667.400736] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
  1093. [ 2667.400998] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1094. [ 2669.814959] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
  1095. [ 2669.814967] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
  1096. [ 2669.815278] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1097. [ 2680.569971] eth0: no IPv6 routers present