Linux localhost.localdomain 2.6.31.5-127.fc12.x86_64 #1 SMP Sat Nov 7 21:11:14 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
reg01: base=0x07ff00000 ( 2047MB), size= 1MB, count=1: uncachable
reg02: base=0x100000000 ( 4096MB), size= 4096MB, count=1: write-back
reg03: base=0x200000000 ( 8192MB), size= 8192MB, count=1: write-back
reg04: base=0x400000000 (16384MB), size=16384MB, count=1: write-back
reg05: base=0x800000000 (32768MB), size=32768MB, count=1: write-back
reg06: base=0xff0000000 (65280MB), size= 256MB, count=1: uncachable
reg07: base=0x0d0000000 ( 3328MB), size= 256MB, count=1: write-combining
X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System: 2.6.18-164.2.1.el5
Current Operating System: Linux localhost.localdomain 2.6.31.5-127.fc12.x86_64 #1 SMP Sat Nov 7 21:11:14 EST 2009 x86_64
Kernel command line: initrd=initrd0.img root=live:CDLABEL=Fedora-12-x86_64-Live-KDE rootfstype=auto ro liveimg rd_NO_LUKS rd_NO_MD noiswmd BOOT_IMAGE=vmlinuz0
Build Date: 05 November 2009 07:43:10PM
Build ID: xorg-x11-server 1.7.1-7.fc12
Current version of pixman: 0.16.2
Before reporting problems, check http://bodhi.fedoraproject.org/
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 5 17:18:28 2010
(II) Loader magic: 0x7c8560
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 1
(--) PCI:*(0:7:0:0) 10de:0165:10de:0334 nVidia Corporation NV44 [Quadro NVS 285] rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default nouveau Device 0"
Driver "nouveau"
EndSection
Section "Screen"
Identifier "Builtin Default nouveau Screen 0"
Device "Builtin Default nouveau Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default nouveau Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default nouveau Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default nouveau Device 0"
(==) No monitor specified for screen "Builtin Default nouveau Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
(==) ModulePath set to "/usr/lib64/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nouveau"
(II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 0.0.10
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 0.4.1
ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU driver
(II) NOUVEAU driver for NVIDIA chipset families :
RIVA TNT (NV04)
RIVA TNT2 (NV05)
GeForce 256 (NV10)
GeForce 2 (NV11, NV15)
GeForce 4MX (NV17, NV18)
GeForce 3 (NV20)
GeForce 4Ti (NV25, NV28)
GeForce FX (NV3x)
GeForce 6 (NV4x)
GeForce 7 (G7x)
GeForce 8 (G8x)
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 07@00:00:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib64/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(--) NOUVEAU(0): Chipset: "NVIDIA NV44"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU(0): Initializing int10
(II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib64/xorg/modules/extensions/libdri.so
(II) NOUVEAU(0): Loaded DRI module
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:07:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:07:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) NOUVEAU(0): [drm] nouveau interface version: 0.0.15
(--) NOUVEAU(0): [drm] kernel modesetting in use
(II) NOUVEAU(0): Creating default Display subsection in Screen section
"Builtin Default nouveau Screen 0" for depth/fbbpp 24/32
(==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(==) NOUVEAU(0): Using HW cursor
(--) NOUVEAU(0): Linear framebuffer at 0xD0000000
(--) NOUVEAU(0): MMIO registers at 0xFA000000
(II) NOUVEAU(0): Output DVI-I-0 has no monitor section
(II) NOUVEAU(0): Output DVI-I-1 has no monitor section
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: DEL Model: a019 Serial#: 842155084
(II) NOUVEAU(0): Year: 2006 Week: 25
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Digital Display Input
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 43 vert.: 27
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
(II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NOUVEAU(0): Default color space is primary color space
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 434 x 270 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Serial No: HF73066I22DL
(II) NOUVEAU(0): Monitor name: DELL 2007WFP
(II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff0010ac19a04c443232
(II) NOUVEAU(0): 19100103802b1b78eeee91a3544c9926
(II) NOUVEAU(0): 0f5054a54b008180714f010101010101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600b20e1100001a000000ff00484637
(II) NOUVEAU(0): 33303636493232444c0a000000fc0044
(II) NOUVEAU(0): 454c4c20323030375746500a000000fd
(II) NOUVEAU(0): 00384c1e530e000a202020202020008f
(II) NOUVEAU(0): EDID vendor "DEL", prod id 40985
(II) NOUVEAU(0): Using EDID range info for horizontal sync
(II) NOUVEAU(0): Using EDID range info for vertical refresh
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): Manufacturer: DEL Model: a019 Serial#: 893728076
(II) NOUVEAU(0): Year: 2007 Week: 15
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Digital Display Input
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 43 vert.: 27
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
(II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NOUVEAU(0): Default color space is primary color space
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 434 x 270 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Serial No: HF7307495E5L
(II) NOUVEAU(0): Monitor name: DELL 2007WFP
(II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff0010ac19a04c354535
(II) NOUVEAU(0): 0f110103802b1b78eeee91a3544c9926
(II) NOUVEAU(0): 0f5054a54b008180714f010101010101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600b20e1100001a000000ff00484637
(II) NOUVEAU(0): 33303734393545354c0a000000fc0044
(II) NOUVEAU(0): 454c4c20323030375746500a000000fd
(II) NOUVEAU(0): 00384c1e530e000a202020202020009b
(II) NOUVEAU(0): Printing probed modes for output DVI-I-1
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Output DVI-I-0 connected
(II) NOUVEAU(0): Output DVI-I-1 connected
(II) NOUVEAU(0): Using spanning desktop for initial modes
(II) NOUVEAU(0): Output DVI-I-0 using initial mode 1680x1050 +0+0
(II) NOUVEAU(0): Output DVI-I-1 using initial mode 1680x1050 +1680+0
(II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) NOUVEAU(0): Initial CRTC_OWNER is 3
(--) NOUVEAU(0): VideoRAM: 131072 kBytes
(--) NOUVEAU(0): Virtual size is 1680x1050 (pitch 1728)
(**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(**) NOUVEAU(0): Display dimensions: (430, 270) mm
(**) NOUVEAU(0): DPI set to (99, 98)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib64/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib64/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib64/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib64/xorg/modules/linux/libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) NOUVEAU(0): Opened GPU channel 1
(II) NOUVEAU(0): [DRI2] Setup complete
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(==) NOUVEAU(0): Backing store disabled
(==) NOUVEAU(0): Silken mouse enabled
(II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
(II) NOUVEAU(0): [XvMC] Extension initialized.
(II) NOUVEAU(0): NVEnterVT is called.
(II) NOUVEAU(0): AGPGART: 64MiB available
(==) NOUVEAU(0): DPMS enabled
(II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) SELinux: Disabled by boolean
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX error: dlopen of /usr/lib64/dri/nouveau_dri.so failed (/usr/lib64/dri/nouveau_dri.so: cannot open shared object file: No such file or directory)
(II) AIGLX: reverting to software rendering
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NOUVEAU(0): Setting screen physical size to 889 x 277
resize called 3360 1050
(II) config/hal: Adding input device HID 0a5c:4502
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.0, module version = 2.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) HID 0a5c:4502: always reports core events
(**) HID 0a5c:4502: Device: "/dev/input/event5"
(II) HID 0a5c:4502: Found keys
(II) HID 0a5c:4502: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 0a5c:4502" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Dell Dell USB Keyboard
(**) Dell Dell USB Keyboard: always reports core events
(**) Dell Dell USB Keyboard: Device: "/dev/input/event3"
(II) Dell Dell USB Keyboard: Found keys
(II) Dell Dell USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device HID 0a5c:4503
(**) HID 0a5c:4503: always reports core events
(**) HID 0a5c:4503: Device: "/dev/input/event6"
(II) HID 0a5c:4503: Found 3 mouse buttons
(II) HID 0a5c:4503: Found relative axes
(II) HID 0a5c:4503: Found x and y relative axes
(II) HID 0a5c:4503: Configuring as mouse
(**) HID 0a5c:4503: YAxisMapping: buttons 4 and 5
(**) HID 0a5c:4503: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 0a5c:4503" (type: MOUSE)
(**) HID 0a5c:4503: (accel) keeping acceleration scheme 1
(**) HID 0a5c:4503: (accel) acceleration profile 0
(II) HID 0a5c:4503: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Mouse
(**) Logitech USB Mouse: always reports core events
(**) Logitech USB Mouse: Device: "/dev/input/event4"
(II) Logitech USB Mouse: Found 3 mouse buttons
(II) Logitech USB Mouse: Found scroll wheel(s)
(II) Logitech USB Mouse: Found relative axes
(II) Logitech USB Mouse: Found x and y relative axes
(II) Logitech USB Mouse: Configuring as mouse
(**) Logitech USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Mouse" (type: MOUSE)
(**) Logitech USB Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB Mouse: (accel) acceleration profile 0
(II) Logitech USB Mouse: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: DEL Model: a019 Serial#: 842155084
(II) NOUVEAU(0): Year: 2006 Week: 25
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Digital Display Input
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 43 vert.: 27
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
(II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NOUVEAU(0): Default color space is primary color space
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 434 x 270 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Serial No: HF73066I22DL
(II) NOUVEAU(0): Monitor name: DELL 2007WFP
(II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff0010ac19a04c443232
(II) NOUVEAU(0): 19100103802b1b78eeee91a3544c9926
(II) NOUVEAU(0): 0f5054a54b008180714f010101010101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600b20e1100001a000000ff00484637
(II) NOUVEAU(0): 33303636493232444c0a000000fc0044
(II) NOUVEAU(0): 454c4c20323030375746500a000000fd
(II) NOUVEAU(0): 00384c1e530e000a202020202020008f
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): Manufacturer: DEL Model: a019 Serial#: 893728076
(II) NOUVEAU(0): Year: 2007 Week: 15
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Digital Display Input
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 43 vert.: 27
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
(II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NOUVEAU(0): Default color space is primary color space
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 434 x 270 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Serial No: HF7307495E5L
(II) NOUVEAU(0): Monitor name: DELL 2007WFP
(II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff0010ac19a04c354535
(II) NOUVEAU(0): 0f110103802b1b78eeee91a3544c9926
(II) NOUVEAU(0): 0f5054a54b008180714f010101010101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600b20e1100001a000000ff00484637
(II) NOUVEAU(0): 33303734393545354c0a000000fc0044
(II) NOUVEAU(0): 454c4c20323030375746500a000000fd
(II) NOUVEAU(0): 00384c1e530e000a202020202020009b
(II) NOUVEAU(0): EDID vendor "DEL", prod id 40985
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-1
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31.5-127.fc12.x86_64 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:11:14 EST 2009
Command line: initrd=initrd0.img root=live:CDLABEL=Fedora-12-x86_64-Live-KDE rootfstype=auto ro liveimg rd_NO_LUKS rd_NO_MD noiswmd BOOT_IMAGE=vmlinuz0
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000098000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe0ac00 (usable)
BIOS-e820: 000000007fe0ac00 - 000000007fe0cc00 (ACPI NVS)
BIOS-e820: 000000007fe0ec00 - 000000007fe5cc00 (reserved)
BIOS-e820: 000000007fe5cc00 - 000000007fe5ec00 (ACPI data)
BIOS-e820: 000000007fe5ec00 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 00000000ff000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x7fe0a max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 000000000 write-back
1 base 07FF00000 mask FFFF00000 uncachable
2 base 080000000 mask F80000000 uncachable
3 base FF0000000 mask FF0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 64GB, type WB
reg 1, base: 2047MB, range: 1MB, type UC
reg 2, base: 2GB, range: 2GB, type UC
reg 3, base: 65280MB, range: 256MB, type UC
total RAM coverred: 63231M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 512M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2047MB, range: 1MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 16GB, type WB
reg 5, base: 32GB, range: 32GB, type WB
reg 6, base: 65280MB, range: 256MB, type UC
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 000000007ff00000 - 0000000100000000 (usable) ==> (reserved)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007fe0a000
0000000000 - 007fe00000 page 2M
007fe00000 - 007fe0a000 page 4k
kernel direct mapping tables up to 7fe0a000 @ 8000-c000
RAMDISK: 7f31e000 - 7fde909e
ACPI: RSDP 00000000000febf0 00024 (v02 DELL )
ACPI: XSDT 00000000000fce54 0006C (v01 DELL B8K 00000015 ASL 00000061)
ACPI: FACP 00000000000fcf7c 000F4 (v03 DELL B8K 00000015 ASL 00000061)
ACPI: DSDT 00000000fff5e6f4 03BCC (v01 DELL dt_ex 00001000 INTL 20050624)
ACPI: FACS 000000007fe0ac00 00040
ACPI: SSDT 00000000fff6248d 00088 (v01 DELL st_ex 00001000 INTL 20050624)
ACPI: APIC 00000000000fd070 0009E (v01 DELL B8K 00000015 ASL 00000061)
ACPI: BOOT 00000000000fd10e 00028 (v01 DELL B8K 00000015 ASL 00000061)
ACPI: ASF! 00000000000fd136 00067 (v16 DELL B8K 00000015 ASL 00000061)
ACPI: MCFG 00000000000fd19d 0003E (v01 DELL B8K 00000015 ASL 00000061)
ACPI: HPET 00000000000fd1db 00038 (v01 DELL B8K 00000015 ASL 00000061)
ACPI: TCPA 00000000000fd437 00032 (v01 DELL B8K 00000015 ASL 00000061)
ACPI: SLIC 00000000000fd213 00176 (v01 DELL B8K 00000015 ASL 00000061)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007fe0a000
Bootmem setup node 0 0000000000000000-000000007fe0a000
NODE_DATA [000000000000a000 - 000000000001ffff]
bootmap [0000000000020000 - 000000000002ffc7] pages 10
(7 early reservations) ==> bootmem [0000000000 - 007fe0a000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00019adb00] TEXT DATA BSS ==> [0001000000 - 00019adb00]
#3 [007f31e000 - 007fde909e] RAMDISK ==> [007f31e000 - 007fde909e]
#4 [0000098000 - 0000100000] BIOS reserved ==> [0000098000 - 0000100000]
#5 [00019ae000 - 00019ae1e0] BRK ==> [00019ae000 - 00019ae1e0]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
found SMP MP-table at [ffff8800000fe710] fe710
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x00000098
0: 0x00000100 -> 0x0007fe0a
On node 0 totalpages: 523682
DMA zone: 56 pages used for memmap
DMA zone: 109 pages reserved
DMA zone: 3827 pages, LIFO batch:0
DMA32 zone: 7106 pages used for memmap
DMA32 zone: 512584 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 0000000000098000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages at ffff8800019bf000, static data 90080 bytes
Built 1 zonelists in Node order, mobility grouping on. Total pages: 516411
Policy zone: DMA32
Kernel command line: initrd=initrd0.img root=live:CDLABEL=Fedora-12-x86_64-Live-KDE rootfstype=auto ro liveimg rd_NO_LUKS rd_NO_MD noiswmd BOOT_IMAGE=vmlinuz0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2043920k/2095144k available (4227k kernel code, 416k absent, 50808k reserved, 2926k data, 1324k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:880
Fast TSC calibration using PIT
Detected 3191.993 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 20971520 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 6383.98 BogoMIPS (lpj=3191993)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Counters: no PMU driver, software counters only.
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20852 entries in 82 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 04
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6383.78 BogoMIPS (lpj=3191893)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU 1/0x2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 4 MCE banks
CPU1: Thermal monitoring enabled (TM1)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 04
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x1 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 6383.78 BogoMIPS (lpj=3191892)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU 2/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU2: Thermal monitoring enabled (TM1)
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Intel(R) Xeon(TM) CPU 3.20GHz stepping 04
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 6383.77 BogoMIPS (lpj=3191889)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU 3/0x3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 4 MCE banks
CPU3: Thermal monitoring enabled (TM1)
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Intel(R) Xeon(TM) CPU 3.20GHz stepping 04
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (25535.33 BogoMIPS).
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=584 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=776 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=248 bytes
sizeof(task_struct)=6008 bytes
CPU0 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 0 2
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU1 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 1 3
domain 1: span 0-3 level CPU
groups: 1,3 0,2
CPU2 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 2 0
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU3 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 3 1
domain 1: span 0-3 level CPU
groups: 1,3 0,2
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 17:10:28 Date: 03/05/10
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 88 20090521 tbutils-246
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfcffc000-0xfcffffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980800-0xff980bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfedf]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xff970000-0xff9703ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
pci 0000:01:00.3: PME# disabled
pci 0000:00:02.0: bridge 32bit mmio: [0xf9f00000-0xf9ffffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:00:03.0: bridge 32bit mmio: [0xf9e00000-0xf9efffff]
pci 0000:07:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:07:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:07:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
pci 0000:07:00.0: reg 30 32bit mmio: [0xfce00000-0xfce1ffff]
pci 0000:00:04.0: bridge 32bit mmio: [0xfa000000-0xfcefffff]
pci 0000:00:04.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:0b:00.0: reg 10 64bit mmio: [0xf9df0000-0xf9dfffff]
pci 0000:0b:00.0: PME# supported from D3hot D3cold
pci 0000:0b:00.0: PME# disabled
pci 0000:00:1c.0: bridge 32bit mmio: [0xf9d00000-0xf9dfffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI3.PCIF._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x800-0x85f has been reserved
system 00:01: ioport range 0xc00-0xc7f has been reserved
system 00:01: ioport range 0x860-0x8ff has been reserved
pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
pci 0000:02:00.0: IO window: disabled
pci 0000:02:00.0: MEM window: disabled
pci 0000:02:00.0: PREFETCH window: disabled
pci 0000:02:01.0: PCI bridge, secondary bus 0000:04
pci 0000:02:01.0: IO window: disabled
pci 0000:02:01.0: MEM window: disabled
pci 0000:02:01.0: PREFETCH window: disabled
pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
pci 0000:01:00.0: IO window: disabled
pci 0000:01:00.0: MEM window: disabled
pci 0000:01:00.0: PREFETCH window: disabled
pci 0000:01:00.3: PCI bridge, secondary bus 0000:05
pci 0000:01:00.3: IO window: disabled
pci 0000:01:00.3: MEM window: disabled
pci 0000:01:00.3: PREFETCH window: disabled
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: disabled
pci 0000:00:02.0: MEM window: 0xf9f00000-0xf9ffffff
pci 0000:00:02.0: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:06
pci 0000:00:03.0: IO window: disabled
pci 0000:00:03.0: MEM window: 0xf9e00000-0xf9efffff
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:00:04.0: PCI bridge, secondary bus 0000:07
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: 0xfa000000-0xfcefffff
pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:05.0: PCI bridge, secondary bus 0000:08
pci 0000:00:05.0: IO window: disabled
pci 0000:00:05.0: MEM window: disabled
pci 0000:00:05.0: PREFETCH window: disabled
pci 0000:00:06.0: PCI bridge, secondary bus 0000:09
pci 0000:00:06.0: IO window: disabled
pci 0000:00:06.0: MEM window: disabled
pci 0000:00:06.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:0a
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: disabled
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: 0xf9d00000-0xf9dfffff
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:02:00.0: setting latency timer to 64
pci 0000:02:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:02:01.0: setting latency timer to 64
pci 0000:01:00.3: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xf9f00000-0xf9ffffff]
pci_bus 0000:06: resource 1 mem: [0xf9e00000-0xf9efffff]
pci_bus 0000:07: resource 1 mem: [0xfa000000-0xfcefffff]
pci_bus 0000:07: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:0b: resource 1 mem: [0xf9d00000-0xf9dfffff]
pci_bus 0000:0c: resource 3 io: [0x00-0xffff]
pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11052k freed
Simple Boot Flag at 0x7a set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1267809030.148:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4013
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI quirk: reroute interrupts for 0x8086:0x2670
pci 0000:07:00.0: Boot video device
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:02.0: irq 48 for MSI/MSI-X
pcieport-driver 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 49 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X
pcieport-driver 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 50 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:04.0: irq 50 for MSI/MSI-X
pcieport-driver 0000:00:04.0: setting latency timer to 64
alloc irq_desc for 51 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:05.0: irq 51 for MSI/MSI-X
pcieport-driver 0000:00:05.0: setting latency timer to 64
alloc irq_desc for 52 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:06.0: irq 52 for MSI/MSI-X
pcieport-driver 0000:00:06.0: setting latency timer to 64
alloc irq_desc for 53 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:07.0: irq 53 for MSI/MSI-X
pcieport-driver 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 54 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:1c.0: irq 54 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:01:00.0: setting latency timer to 64
alloc irq_desc for 55 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:02:00.0: irq 55 for MSI/MSI-X
pcieport-driver 0000:02:00.0: setting latency timer to 64
alloc irq_desc for 56 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:02:01.0: irq 56 for MSI/MSI-X
pcieport-driver 0000:02:01.0: setting latency timer to 64
aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:04.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:06.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:01:00.0:pcie12: AER service couldn't init device: no _OSC support
aer 0000:02:00.0:pcie22: AER service couldn't init device: no _OSC support
aer 0000:02:01.0:pcie22: AER service couldn't init device: no _OSC support
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: can't get bus number, assuming 0
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [VBTN]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x1f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 20
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 20
ata3: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970200 irq 20
ata4: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970280 irq 20
ata5: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970300 irq 20
ata6: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi6 : ata_piix
scsi7 : ata_piix
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ata8: port disabled. ignoring.
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xff980800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 2:774:187
rtc_cmos 00:05: setting system clock to 2010-03-05 17:10:31 UTC (1267809031)
Initalizing network drop monitor service
ata7.00: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H492C, DE02, max UDMA/33
ata7.00: configured for UDMA/33
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: New USB device found, idVendor=0424, idProduct=2504
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:
scsi 6:0:0:0: CD-ROM TSSTcorp CDRWDVD TS-H492C DE02 PQ: 0 ANSI: 5
sda:sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg2 type 5
sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: New USB device found, idVendor=413c, idProduct=2003
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: Dell USB Keyboard
usb 2-1: Manufacturer: Dell
usb 2-1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
sda1 sda2 sda3 sda4 < sda5
usb 4-1: new low speed USB device using uhci_hcd and address 2
sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1324k freed
Write protecting the kernel read-only data: 6344k
dracut: dracut-002-13.4.git8f397a9b.fc12
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: root was live:/dev/disk/by-label/Fedora-12-x86_64-Live-KDE, liveroot is now live:CDLABEL=Fedora-12-x86_64-Live-KDE
udev: starting version 145
[drm] Initialized drm 1.1.0 20060810
nouveau 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:07:00.0: setting latency timer to 64
[drm] nouveau 0000:07:00.0: Detected an NV40 generation card (0x044500a2)
[drm] nouveau 0000:07:00.0: Attempting to load BIOS image from PROM
usb 4-1: New USB device found, idVendor=046d, idProduct=c00c
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Mouse
usb 4-1: Manufacturer: Logitech
usb 4-1: configuration #1 chosen from 1 choice
input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input4
generic-usb 0003:046D:C00C.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.2-1/input0
[drm] nouveau 0000:07:00.0: ... appears to be valid
[drm] nouveau 0000:07:00.0: BIT BIOS found
[drm] nouveau 0000:07:00.0: Bios version 05.44.02.63
[drm] nouveau 0000:07:00.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:07:00.0: Raw DCB entry 0: 01000300 00000028
[drm] nouveau 0000:07:00.0: Raw DCB entry 1: 01000302 00000000
[drm] nouveau 0000:07:00.0: Raw DCB entry 2: 02011310 00000028
[drm] nouveau 0000:07:00.0: Raw DCB entry 3: 04011312 00000000
[drm] nouveau 0000:07:00.0: Parsing VBIOS init table 0 at offset 0xB1C9
[drm] nouveau 0000:07:00.0: Parsing VBIOS init table 1 at offset 0xB52E
[drm] nouveau 0000:07:00.0: Parsing VBIOS init table 2 at offset 0xBA68
[drm] nouveau 0000:07:00.0: Parsing VBIOS init table 3 at offset 0xBBBD
[drm] nouveau 0000:07:00.0: Parsing VBIOS init table 4 at offset 0xBD67
usb 5-1: new full speed USB device using uhci_hcd and address 2
[TTM] Zone kernel: Available graphics memory: 1028150 kiB.
[drm] nouveau 0000:07:00.0: 128 MiB VRAM
[drm] nouveau 0000:07:00.0: 64 MiB GART (aperture)
[drm] nouveau 0000:07:00.0: Allocating FIFO number 0
[drm] nouveau 0000:07:00.0: nouveau_channel_alloc: initialised FIFO 0
[drm] nouveau 0000:07:00.0: Initial CRTC_OWNER is 0
[drm] nouveau 0000:07:00.0: Detected a DVI-I connector
[drm] nouveau 0000:07:00.0: Detected a DVI-I connector
[drm] nouveau 0000:07:00.0: Saving VGA fonts
usb 5-1: New USB device found, idVendor=0a5c, idProduct=4500
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: BCM2046B1
usb 5-1: Manufacturer: Broadcom
usb 5-1: configuration #1 chosen from 1 choice
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 3 ports detected
[drm] nouveau 0000:07:00.0: allocated 1680x1050 fb: 0x49000, bo ffff88007fb05a00
[drm] nouveau 0000:07:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[drm] nouveau 0000:07:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:07:00.0: Setting dpms mode 3 on vga encoder (output 2)
[drm] nouveau 0000:07:00.0: Setting dpms mode 3 on CRTC 0
[drm] nouveau 0000:07:00.0: vpll: n 22 m 5 log2p 0
[drm] TMDS-8: set mode 1680x1050 2a
[drm] nouveau 0000:07:00.0: Setting dpms mode 0 on CRTC 0
[drm] nouveau 0000:07:00.0: nv04_dfp_commit called for encoder 1
[drm] nouveau 0000:07:00.0: 0xA781: Parsing digital output script table
[drm] nouveau 0000:07:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[drm] nouveau 0000:07:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[drm] nouveau 0000:07:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[drm] nouveau 0000:07:00.0: Setting dpms mode 3 on CRTC 1
[drm] nouveau 0000:07:00.0: vpll: n 22 m 5 log2p 0
[drm] TMDS-10: set mode 1680x1050 2b
[drm] nouveau 0000:07:00.0: Setting dpms mode 0 on CRTC 1
[drm] nouveau 0000:07:00.0: nv04_dfp_commit called for encoder 3
[drm] nouveau 0000:07:00.0: 0xA7D1: Parsing digital output script table
usb 5-1.1: new full speed USB device using uhci_hcd and address 3
[drm] nouveau 0000:07:00.0: Setting dpms mode 0 on tmds encoder (output 3)
[drm] nouveau 0000:07:00.0: Output DVI-I-2 is running on CRTC 1 using output C
Console: switching to colour frame buffer device 210x65
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.15 20090420 for 0000:07:00.0 on minor 0
dracut: Starting plymouth daemon
usb 5-1.1: New USB device found, idVendor=0a5c, idProduct=4502
usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-1.1: configuration #1 chosen from 1 choice
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1.1/5-1.1:1.0/input/input5
generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.3-1.1/input0
usb 5-1.2: new full speed USB device using uhci_hcd and address 4
dracut: rd_NO_MD: removing MD RAID activation
dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
usb 5-1.2: New USB device found, idVendor=0a5c, idProduct=4503
usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-1.2: configuration #1 chosen from 1 choice
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1.2/5-1.2:1.0/input/input6
generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.3-1.2/input0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
usb 5-1.3: new full speed USB device using uhci_hcd and address 5
usb 5-1.3: New USB device found, idVendor=050d, idProduct=016a
usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.3: Product: BLUETOOTH USB +EDR ADAPTER v2.1 UHE
usb 5-1.3: Manufacturer: Broadcom Corp
usb 5-1.3: SerialNumber: 00190E05A6BD
usb 5-1.3: configuration #1 chosen from 1 choice
dracut: Scanning for dmraid devices
dracut: Found dmraid sets:
dracut: isw_eagjcbhhdi_MyRAID
dracut: Activating isw_eagjcbhhdi_MyRAID
dracut: The dynamic shared library "libdmraid-events-isw.so" could not be loaded:
dracut: libdmraid-events-isw.so: cannot open shared object file: No such file or directory
dracut: RAID set "isw_eagjcbhhdi_MyRAID" was activated
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 175360
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
squashfs: version 4.0 (2009/01/31) Phillip Lougher
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
EXT4-fs (dm-7): barriers enabled
kjournald2 starting: pid 433, dev dm-7:8, commit interval 5 seconds
EXT4-fs (dm-7): internal journal on dm-7:8
EXT4-fs (dm-7): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (dm-7): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/live-rw
dracut: Loading SELinux policy
type=1404 audit(1267809209.454:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 144734 rules.
SELinux: 8192 avtab hash slots, 144734 rules.
SELinux: 8 users, 12 roles, 2941 types, 136 bools, 1 sens, 1024 cats
SELinux: 75 classes, 144734 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-7, type ext4), uses xattr
SELinux: initialized (dev loop2, type squashfs), not configured for labeling
SELinux: initialized (dev loop0, type squashfs), not configured for labeling
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1267809213.129:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
udev: starting version 145
end_request: I/O error, dev fd0, sector 0
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
tg3.c:v3.99 (April 20, 2009)
tg3 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:0b:00.0: setting latency timer to 64
tg3 0000:0b:00.0: PME# disabled
eth0: Tigon3 [partno(BCM5752KFBG) rev 6002] (PCI Express) MAC address 00:13:72:a4:9e:3d
eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ppdev: user-space parallel port driver
EDAC MC: Ver: 2.1.0 Nov 7 2009
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402884
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402884
Buffer I/O error on device sr0, logical block 350721
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3866: speaker_outs=1 (0x11/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3870: hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3871: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3882: inputs: mic=0x10, fmic=0x0, line=0xf, fline=0x0, cd=0x0, aux=0x0
input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
device-mapper: multipath: version 1.1.0 loaded
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
Adding 6291448k swap on /dev/mapper/isw_eagjcbhhdi_MyRAIDp5. Priority:-1 extents:1 across:6291448k
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
microcode: CPU0 sig=0xf64, pf=0x1, revision=0x2
platform microcode: firmware: requesting intel-ucode/0f-06-04
microcode: CPU1 sig=0xf64, pf=0x1, revision=0x2
platform microcode: firmware: requesting intel-ucode/0f-06-04
microcode: CPU2 sig=0xf64, pf=0x1, revision=0x2
platform microcode: firmware: requesting intel-ucode/0f-06-04
microcode: CPU3 sig=0xf64, pf=0x1, revision=0x2
platform microcode: firmware: requesting intel-ucode/0f-06-04
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Microcode Update Driver: v2.00 removed.
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402884
Buffer I/O error on device sr0, logical block 350721
sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 1402880
Buffer I/O error on device sr0, logical block 350720
Buffer I/O error on device sr0, logical block 350721
tg3 0000:0b:00.0: PME# disabled
alloc irq_desc for 57 on node 0
alloc kstat_irqs on node 0
tg3 0000:0b:00.0: irq 57 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
eth0: no IPv6 routers present
[drm] nouveau 0000:07:00.0: Allocating FIFO number 1
[drm] nouveau 0000:07:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:07:00.0: Setting dpms mode 3 on CRTC 1
[drm] nouveau 0000:07:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[drm] nouveau 0000:07:00.0: Setting dpms mode 3 on CRTC 1
[drm] nouveau 0000:07:00.0: vpll: n 22 m 5 log2p 0
[drm] TMDS-10: set mode 1680x1050 2c
[drm] nouveau 0000:07:00.0: Setting dpms mode 0 on CRTC 1
[drm] nouveau 0000:07:00.0: nv04_dfp_commit called for encoder 3
[drm] nouveau 0000:07:00.0: 0xA7D1: Parsing digital output script table
[drm] nouveau 0000:07:00.0: Setting dpms mode 0 on tmds encoder (output 3)
[drm] nouveau 0000:07:00.0: Output DVI-I-2 is running on CRTC 1 using output C
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 0 2
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU1 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 1 3
domain 1: span 0-3 level CPU
groups: 1,3 0,2
CPU2 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 2 0
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU3 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 3 1
domain 1: span 0-3 level CPU
groups: 1,3 0,2
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 0 2
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU1 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 1 3
domain 1: span 0-3 level CPU
groups: 1,3 0,2
CPU2 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 2 0
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU3 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 3 1
domain 1: span 0-3 level CPU
groups: 1,3 0,2
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 0 2
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU1 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 1 3
domain 1: span 0-3 level CPU
groups: 1,3 0,2
CPU2 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 2 0
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU3 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 3 1
domain 1: span 0-3 level CPU
groups: 1,3 0,2
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 0 2
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU1 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 1 3
domain 1: span 0-3 level CPU
groups: 1,3 0,2
CPU2 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 2 0
domain 1: span 0-3 level CPU
groups: 0,2 1,3
CPU3 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 3 1
domain 1: span 0-3 level CPU
groups: 1,3 0,2
[drm] nouveau 0000:07:00.0: Setting dpms mode 1 on tmds encoder (output 1)
[drm] nouveau 0000:07:00.0: Setting dpms mode 1 on CRTC 0
[drm] nouveau 0000:07:00.0: Setting dpms mode 1 on tmds encoder (output 3)
[drm] nouveau 0000:07:00.0: Setting dpms mode 1 on CRTC 1
[drm] nouveau 0000:07:00.0: Setting dpms mode 2 on tmds encoder (output 1)
[drm] nouveau 0000:07:00.0: Setting dpms mode 2 on CRTC 0
[drm] nouveau 0000:07:00.0: Setting dpms mode 2 on tmds encoder (output 3)
[drm] nouveau 0000:07:00.0: Setting dpms mode 2 on CRTC 1
[drm] nouveau 0000:07:00.0: Setting dpms mode 0 on CRTC 0
[drm] nouveau 0000:07:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[drm] nouveau 0000:07:00.0: Setting dpms mode 0 on CRTC 1
[drm] nouveau 0000:07:00.0: Setting dpms mode 0 on tmds encoder (output 3)
EXT4-fs (dm-3): barriers enabled
kjournald2 starting: pid 2567, dev dm-3:8, commit interval 5 seconds
EXT4-fs (dm-3): internal journal on dm-3:8
EXT4-fs (dm-3): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (dm-3): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-3, type ext4), uses xattr
00:00.0 Host bridge: Intel Corporation 5000X Chipset Memory Controller Hub (rev 12)
Subsystem: Intel Corporation Device 8086
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 0
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Address: fee00000 Data: 0000
Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol+
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=05, sec-latency=0
Memory behind bridge: f9f00000-f9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
Address: fee0f00c Data: 4151
Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: f9e00000-f9efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
Address: fee0f00c Data: 4159
Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:04.0 PCI bridge: Intel Corporation 5000X Chipset PCI Express x16 Port 4-7 (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: fa000000-fcefffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
Address: fee0f00c Data: 4161
Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 2, PowerLimit 150.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
Address: fee0f00c Data: 4169
Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 6 (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
Address: fee0f00c Data: 4171
Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #6, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
Address: fee0f00c Data: 4179
Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #7, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev 12)
Subsystem: Dell Device 01c1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: i5000_edac
Kernel modules: i7300_idle, i5000_edac, i5k_amb
00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev 12)
Subsystem: Intel Corporation Device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: i7300_idle, i5000_edac, i5k_amb
00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev 12)
Subsystem: Intel Corporation Device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: i7300_idle, i5000_edac, i5k_amb
00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev 12)
Subsystem: Intel Corporation Device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev 12)
Subsystem: Intel Corporation Device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev 12)
Subsystem: Intel Corporation Device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev 12)
Subsystem: Intel Corporation Device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.0 Audio device: Intel Corporation 631xESB/632xESB High Definition Audio Controller (rev 09)
Subsystem: Dell Device 01c1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fcffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Memory behind bridge: f9d00000-f9dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4181
Capabilities: [90] Subsystem: Dell Device 01c1
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) (prog-if 00 [UHCI])
Subsystem: Dell Device 01c1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) (prog-if 00 [UHCI])
Subsystem: Dell Device 01c1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) (prog-if 00 [UHCI])
Subsystem: Dell Device 01c1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev 09) (prog-if 00 [UHCI])
Subsystem: Dell Device 01c1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at ff20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) (prog-if 20 [EHCI])
Subsystem: Dell Device 01c1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Dell Device 01c1
00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
Subsystem: Dell Device 01c1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device 01c1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_generic, pata_acpi
00:1f.2 RAID bus controller: Intel Corporation 631xESB/632xESB SATA RAID Controller (rev 09)
Subsystem: Dell Device 01c1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=32]
Region 5: Memory at ff970000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA <?>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 09)
Subsystem: Dell Device 01c1
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=01, secondary=02, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] Express (v1) Upstream Port, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-SlotPowerLimit 0.000000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Subsystem: Dell Device 01c1
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
01:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=01, secondary=05, subordinate=05, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Subsystem: Dell Device 01c1
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=00:00.3 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Kernel modules: shpchp
02:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] Express (v1) Downstream Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4189
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Subsystem: Dell Device 01c1
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
02:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] Express (v1) Downstream Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4191
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Subsystem: Dell Device 01c1
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
07:00.0 VGA compatible controller: nVidia Corporation NV44 [Quadro NVS 285] (rev a1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device 0334
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at fce00000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Kernel driver in use: nouveau
Kernel modules: nouveau, nvidiafb
0b:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 02)
Subsystem: Dell Device 01c1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 57
Region 0: Memory at f9df0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: BCM5752KFBG
[EC] Engineering changes: 01c1.004
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 34 65 34
[RV] Reserved: checksum bad, 26 byte(s) reserved
Read/write fields:
[YA] Asset tag: XYZ01234567
[RW] Read-write area: 107 byte(s) free
End
Capabilities: [58] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee0400c Data: 41c9
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c] Virtual Channel <?>
Kernel driver in use: tg3
Kernel modules: tg3