Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [root@localhost ~]# lspci -v
- 00:00.0 Host bridge: Intel Corporation Clarksfield/Lynnfield DMI (rev 11)
- Subsystem: ASUSTeK Computer Inc. Unknown device 8383
- Flags: fast devsel
- Capabilities: [40] #00 [0000]
- 00:03.0 PCI bridge: Intel Corporation Clarksfield/Lynnfield PCI Express Root Port 1 (rev 11) (prog-if 00 [Normal decode])
- Flags: bus master, fast devsel, latency 0
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
- I/O behind bridge: 00009000-00009fff
- Memory behind bridge: f7900000-f79fffff
- Prefetchable memory behind bridge: 00000000c0000000-00000000cff00000
- Capabilities: [40] #0d [0000]
- Capabilities: [60] Message Signalled Interrupts: 64bit- Queue=0/1 Enable+
- Capabilities: [90] Express Root Port (Slot+) IRQ 0
- Capabilities: [e0] Power Management version 3
- 00:08.0 System peripheral: Intel Corporation Clarksfield/Lynnfield System Management Registers (rev 11)
- Subsystem: Unknown device 0043:0083
- Flags: fast devsel
- Capabilities: [40] Express Unknown type IRQ 0
- 00:08.1 System peripheral: Intel Corporation Clarksfield/Lynnfield Semaphore and Scratchpad Registers (rev 11)
- Subsystem: Unknown device 0043:0083
- Flags: fast devsel
- Capabilities: [40] Express Unknown type IRQ 0
- 00:08.2 System peripheral: Intel Corporation Clarksfield/Lynnfield System Control and Status Registers (rev 11)
- Subsystem: Unknown device 0043:0083
- Flags: fast devsel
- Capabilities: [40] Express Unknown type IRQ 0
- 00:08.3 System peripheral: Intel Corporation Clarksfield/Lynnfield Miscellaneous Registers (rev 11)
- Flags: fast devsel
- 00:10.0 System peripheral: Intel Corporation QPI Link (rev 11)
- Flags: fast devsel
- 00:10.1 System peripheral: Intel Corporation QPI Routing and Protocol Registers (rev 11)
- Flags: fast devsel
- 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
- Subsystem: ASUSTeK Computer Inc. Unknown device 8383
- Flags: bus master, medium devsel, latency 0, IRQ 169
- Memory at f78fe000 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [50] Power Management version 2
- Capabilities: [58] Debug port
- Capabilities: [98] #13 [0306]
- 00:1b.0 Audio device: Intel Corporation Ibex Peak High Definition Audio (rev 05)
- Subsystem: ASUSTeK Computer Inc. Unknown device 8375
- Flags: bus master, fast devsel, latency 0, IRQ 98
- Memory at f78f8000 (64-bit, non-prefetchable) [size=16K]
- Capabilities: [50] Power Management version 2
- Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
- Capabilities: [70] Express Unknown type IRQ 0
- 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])
- Flags: bus master, fast devsel, latency 0
- Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
- I/O behind bridge: 0000c000-0000cfff
- Memory behind bridge: f7c00000-f7cfffff
- Prefetchable memory behind bridge: 00000000e0000000-00000000eff00000
- Capabilities: [40] Express Root Port (Slot+) IRQ 0
- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
- Capabilities: [90] #0d [0000]
- Capabilities: [a0] Power Management version 2
- 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) (prog-if 00 [Normal decode])
- Flags: bus master, fast devsel, latency 0
- Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
- Capabilities: [40] Express Root Port (Slot+) IRQ 0
- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
- Capabilities: [90] #0d [0000]
- Capabilities: [a0] Power Management version 2
- 00:1c.5 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 6 (rev 05) (prog-if 00 [Normal decode])
- Flags: bus master, fast devsel, latency 0
- Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
- Prefetchable memory behind bridge: 00000000dff00000-00000000dff00000
- Capabilities: [40] Express Root Port (Slot+) IRQ 0
- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
- Capabilities: [90] #0d [0000]
- Capabilities: [a0] Power Management version 2
- 00:1c.6 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 7 (rev 05) (prog-if 00 [Normal decode])
- Flags: bus master, fast devsel, latency 0
- Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
- I/O behind bridge: 0000b000-0000bfff
- Memory behind bridge: f7b00000-f7bfffff
- Capabilities: [40] Express Root Port (Slot+) IRQ 0
- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
- Capabilities: [90] #0d [0000]
- Capabilities: [a0] Power Management version 2
- 00:1c.7 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 8 (rev 05) (prog-if 00 [Normal decode])
- Flags: bus master, fast devsel, latency 0
- Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
- I/O behind bridge: 0000a000-0000afff
- Memory behind bridge: f7a00000-f7afffff
- Prefetchable memory behind bridge: 00000000dfe00000-00000000dfe00000
- Capabilities: [40] Express Root Port (Slot+) IRQ 0
- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
- Capabilities: [90] #0d [0000]
- Capabilities: [a0] Power Management version 2
- 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
- Subsystem: ASUSTeK Computer Inc. Unknown device 8383
- Flags: bus master, medium devsel, latency 0, IRQ 66
- Memory at f78fd000 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [50] Power Management version 2
- Capabilities: [58] Debug port
- Capabilities: [98] #13 [0306]
- 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
- Flags: bus master, fast devsel, latency 0
- Bus: primary=00, secondary=07, subordinate=08, sec-latency=32
- I/O behind bridge: 0000d000-0000efff
- Memory behind bridge: f7d00000-f7ffffff
- Capabilities: [50] #0d [0000]
- 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05)
- Subsystem: ASUSTeK Computer Inc. Unknown device 8383
- Flags: bus master, medium devsel, latency 0
- Capabilities: [e0] Vendor Specific Information
- 00:1f.2 SATA controller: Intel Corporation Ibex Peak 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
- Subsystem: ASUSTeK Computer Inc. Unknown device 8383
- Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 82
- I/O ports at 8880 [size=8]
- I/O ports at 8800 [size=4]
- I/O ports at 8480 [size=8]
- I/O ports at 8400 [size=4]
- I/O ports at 8080 [size=32]
- Memory at f78f7000 (32-bit, non-prefetchable) [size=2K]
- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
- Capabilities: [70] Power Management version 3
- Capabilities: [a8] #12 [0010]
- Capabilities: [b0] #13 [0306]
- 00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05)
- Subsystem: ASUSTeK Computer Inc. Unknown device 8383
- Flags: medium devsel, IRQ 185
- Memory at f78fc000 (64-bit, non-prefetchable) [size=256]
- I/O ports at ffe0 [size=32]
- 01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 68d8 (prog-if 00 [VGA controller])
- Subsystem: ASUSTeK Computer Inc. Unknown device 0356
- Flags: bus master, fast devsel, latency 0, IRQ 10
- Memory at c0000000 (64-bit, prefetchable) [size=256M]
- Memory at f79c0000 (64-bit, non-prefetchable) [size=128K]
- I/O ports at 9000 [size=256]
- Expansion ROM at f79a0000 [disabled] [size=128K]
- Capabilities: [50] Power Management version 3
- Capabilities: [58] Express Legacy Endpoint IRQ 0
- Capabilities: [a0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
- 01:00.1 Audio device: ATI Technologies Inc Unknown device aa60
- Subsystem: ASUSTeK Computer Inc. Unknown device aa60
- Flags: bus master, fast devsel, latency 0, IRQ 5
- Memory at f79fc000 (64-bit, non-prefetchable) [size=16K]
- Capabilities: [50] Power Management version 3
- Capabilities: [58] Express Legacy Endpoint IRQ 0
- Capabilities: [a0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
- 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
- Subsystem: ASUSTeK Computer Inc. Unknown device 83a3
- Flags: bus master, fast devsel, latency 0, IRQ 90
- I/O ports at a800 [size=256]
- Memory at dfeff000 (64-bit, prefetchable) [size=4K]
- Memory at dfef8000 (64-bit, prefetchable) [size=16K]
- Expansion ROM at f7af0000 [disabled] [size=64K]
- Capabilities: [40] Power Management version 3
- Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
- Capabilities: [70] Express Endpoint IRQ 1
- Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4
- Capabilities: [cc] Vital Product Data
- 03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
- Subsystem: ASUSTeK Computer Inc. Unknown device 824f
- Flags: bus master, fast devsel, latency 0, IRQ 185
- Memory at f7bfe000 (32-bit, non-prefetchable) [size=8K]
- Capabilities: [68] Power Management version 2
- Capabilities: [50] Express Legacy Endpoint IRQ 1
- 03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) (prog-if 85 [Master SecO PriO])
- Subsystem: ASUSTeK Computer Inc. Unknown device 824f
- Flags: bus master, fast devsel, latency 0, IRQ 193
- I/O ports at bc00 [size=8]
- I/O ports at b880 [size=4]
- I/O ports at b800 [size=8]
- I/O ports at b480 [size=4]
- I/O ports at b400 [size=16]
- Capabilities: [68] Power Management version 2
- 04:00.0 Multimedia video controller: Unknown device 1a0a:6200 (rev 01)
- Subsystem: Avermedia Technologies Inc Unknown device 6202
- Flags: bus master, fast devsel, latency 0, IRQ 5
- Memory at dfff8000 (64-bit, prefetchable) [size=32K]
- Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
- Capabilities: [78] Power Management version 3
- Capabilities: [80] Express Endpoint IRQ 0
- 06:00.0 VGA compatible controller: ATI Technologies Inc RV530LE [Radeon X1600/X1650 PRO] (prog-if 00 [VGA controller])
- Subsystem: PC Partner Limited Unknown device 0840
- Flags: fast devsel, IRQ 10
- Memory at e0000000 (64-bit, prefetchable) [disabled] [size=256M]
- Memory at f7ce0000 (64-bit, non-prefetchable) [disabled] [size=64K]
- I/O ports at c000 [disabled] [size=256]
- Expansion ROM at f7cc0000 [disabled] [size=128K]
- Capabilities: [50] Power Management version 2
- Capabilities: [58] Express Endpoint IRQ 0
- Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
- 06:00.1 Display controller: ATI Technologies Inc RV530LE [Radeon X1650 PRO] (Secondary)
- Subsystem: PC Partner Limited Unknown device 0841
- Flags: bus master, fast devsel, latency 0
- Memory at f7cf0000 (64-bit, non-prefetchable) [size=64K]
- Capabilities: [50] Power Management version 2
- Capabilities: [58] Express Endpoint IRQ 0
- 07:03.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])
- Flags: bus master, medium devsel, latency 64
- Bus: primary=07, secondary=08, subordinate=08, sec-latency=64
- I/O behind bridge: 0000e000-0000efff
- Memory behind bridge: f7e00000-f7ffffff
- Capabilities: [dc] Power Management version 1
- 07:04.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller (rev c0) (prog-if 10 [OHCI])
- Subsystem: ASUSTeK Computer Inc. Unknown device 81fe
- Flags: bus master, medium devsel, latency 64, IRQ 11
- Memory at f7dff000 (32-bit, non-prefetchable) [size=2K]
- I/O ports at dc00 [size=128]
- Capabilities: [50] Power Management version 2
- 08:04.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
- Subsystem: D-Link System Inc DFE-570TX Quad Fast Ethernet
- Flags: bus master, medium devsel, latency 64, IRQ 185
- I/O ports at ec00 [size=128]
- Memory at f7fff000 (32-bit, non-prefetchable) [size=1K]
- Expansion ROM at f7f80000 [disabled] [size=256K]
- 08:05.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
- Subsystem: D-Link System Inc DFE-570TX Quad Fast Ethernet
- Flags: bus master, medium devsel, latency 64, IRQ 193
- I/O ports at e880 [size=128]
- Memory at f7ffe000 (32-bit, non-prefetchable) [size=1K]
- Expansion ROM at f7f40000 [disabled] [size=256K]
- 08:06.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
- Subsystem: D-Link System Inc DFE-570TX Quad Fast Ethernet
- Flags: bus master, medium devsel, latency 64, IRQ 169
- I/O ports at e800 [size=128]
- Memory at f7ffd000 (32-bit, non-prefetchable) [size=1K]
- Expansion ROM at f7f00000 [disabled] [size=256K]
- 08:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
- Subsystem: D-Link System Inc DFE-570TX Quad Fast Ethernet
- Flags: bus master, medium devsel, latency 64, IRQ 177
- I/O ports at e480 [size=128]
- Memory at f7ffc000 (32-bit, non-prefetchable) [size=1K]
- Expansion ROM at f7ec0000 [disabled] [size=256K]
- [root@localhost ~]#
- [root@localhost ~]# lsmod
- Module Size Used by
- autofs4 57033 2
- hidp 83521 2
- rfcomm 104809 0
- l2cap 89281 10 hidp,rfcomm
- bluetooth 118597 5 hidp,rfcomm,l2cap
- sunrpc 197897 1
- ip_conntrack_netbios_ns 36033 0
- ipt_REJECT 38849 1
- xt_state 35265 2
- ip_conntrack 91109 2 ip_conntrack_netbios_ns,xt_state
- nfnetlink 40457 1 ip_conntrack
- iptable_filter 36161 1
- ip_tables 55329 1 iptable_filter
- ip6t_REJECT 38849 1
- xt_tcpudp 36289 10
- ip6table_filter 36033 1
- ip6_tables 50049 1 ip6table_filter
- x_tables 50377 6 ipt_REJECT,xt_state,ip_tables,ip6t_REJECT,xt_tcpudp,ip6_tables
- ipv6 424609 47 ip6t_REJECT
- xfrm_nalgo 43333 1 ipv6
- crypto_api 42945 1 xfrm_nalgo
- cpufreq_ondemand 42449 8
- acpi_cpufreq 47937 1
- freq_table 40889 2 cpufreq_ondemand,acpi_cpufreq
- dm_multipath 55257 0
- scsi_dh 41665 1 dm_multipath
- video 53197 0
- hwmon 36553 0
- backlight 39873 1 video
- sbs 49921 0
- i2c_ec 38593 1 sbs
- button 40545 0
- battery 43849 0
- asus_acpi 50917 0
- acpi_memhotplug 40133 0
- ac 38729 0
- parport_pc 62313 0
- lp 47121 0
- parport 73165 2 parport_pc,lp
- sr_mod 50789 0
- cdrom 68713 1 sr_mod
- snd_hda_intel 481777 0
- snd_seq_dummy 37061 0
- snd_seq_oss 65473 0
- snd_seq_midi_event 41025 1 snd_seq_oss
- snd_seq 87777 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
- snd_seq_device 41557 3 snd_seq_dummy,snd_seq_oss,snd_seq
- snd_pcm_oss 77377 0
- snd_mixer_oss 49985 1 snd_pcm_oss
- i2c_i801 41813 0
- serio_raw 40517 0
- snd_pcm 116681 2 snd_hda_intel,snd_pcm_oss
- tulip 85377 0
- snd_timer 57161 2 snd_seq,snd_pcm
- snd_page_alloc 44113 2 snd_hda_intel,snd_pcm
- snd_hwdep 43593 1 snd_hda_intel
- snd 99433 9 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
- soundcore 41825 1 snd
- shpchp 70765 0
- i2c_core 56129 2 i2c_ec,i2c_i801
- r8169 70853 0
- mii 38849 1 r8169
- pcspkr 36289 0
- sg 69993 0
- dm_raid45 99025 0
- dm_message 36161 1 dm_raid45
- dm_region_hash 46145 1 dm_raid45
- dm_mem_cache 38977 1 dm_raid45
- dm_snapshot 51465 0
- dm_zero 35265 0
- dm_mirror 53065 0
- dm_log 44865 3 dm_raid45,dm_region_hash,dm_mirror
- dm_mod 100369 11 dm_multipath,dm_raid45,dm_snapshot,dm_zero,dm_mirror,dm_log
- ahci 68809 0
- libata 208721 1 ahci
- usb_storage 116129 2
- sd_mod 56385 3
- scsi_mod 196569 6 scsi_dh,sr_mod,sg,libata,usb_storage,sd_mod
- ext3 168017 2
- jbd 94257 1 ext3
- uhci_hcd 57433 0
- ohci_hcd 55925 0
- ehci_hcd 65741 0
- [root@localhost ~]#
- [root@localhost ~]# dmesg
- Linux version 2.6.18-128.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Jan 21 10:41:14 EST 2009
- Command line: ro root=/dev/VolGroup00/LogVol00
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
- BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000bfe70000 (usable)
- BIOS-e820: 00000000bfe70000 - 00000000bfe88000 (ACPI data)
- BIOS-e820: 00000000bfe88000 - 00000000bfedc000 (ACPI NVS)
- BIOS-e820: 00000000bfedc000 - 00000000c0000000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
- BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
- DMI 2.6 present.
- ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fb970
- ACPI: XSDT (v001 102011 XSDT1457 0x20111020 MSFT 0x00000097) @ 0x00000000bfe70100
- ACPI: FADT (v003 102011 FACP1457 0x20111020 MSFT 0x00000097) @ 0x00000000bfe70290
- ACPI: MADT (v001 102011 APIC1457 0x20111020 MSFT 0x00000097) @ 0x00000000bfe70390
- ACPI: MCFG (v001 102011 OEMMCFG 0x20111020 MSFT 0x00000097) @ 0x00000000bfe70460
- ACPI: OEMB (v001 102011 OEMB1457 0x20111020 MSFT 0x00000097) @ 0x00000000bfe88040
- ACPI: HPET (v001 102011 OEMHPET 0x20111020 MSFT 0x00000097) @ 0x00000000bfe7f3f0
- ACPI: DMAR (v001 AMI OEMDMAR 0x00000001 MSFT 0x00000097) @ 0x00000000bfe880c0
- ACPI: ASPT (v006 102011 PerfTune 0x20111020 MSFT 0x00000097) @ 0x00000000bfe821d0
- ACPI: WDTT (v002 102011 OEDWDTT 0x20111020 MSFT 0x00000097) @ 0x00000000bfe82210
- ACPI: OSFR (v001 102011 OEMOSFR 0x20111020 MSFT 0x00000097) @ 0x00000000bfe82320
- ACPI: SSDT (v001 DpgPmm CpuPm 0x00000012 INTL 0x20060113) @ 0x00000000bfe8ae10
- ACPI: DSDT (v001 A1326 A1326001 0x00000001 INTL 0x20060113) @ 0x0000000000000000
- No NUMA configuration found
- Faking a node at 0000000000000000-0000000440000000
- Bootmem setup node 0 0000000000000000-0000000440000000
- Memory for crash kernel (0x0 to 0x0) notwithin permissible range
- disabling kdump
- On node 0 totalpages: 4131600
- DMA zone: 2664 pages, LIFO batch:0
- DMA32 zone: 767656 pages, LIFO batch:31
- Normal zone: 3361280 pages, LIFO batch:31
- ACPI: PM-Timer IO Port: 0x808
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- Processor #0 7:14 APIC version 21
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- Processor #2 7:14 APIC version 21
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
- Processor #4 7:14 APIC version 21
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
- Processor #6 7:14 APIC version 21
- ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
- Processor #1 7:14 APIC version 21
- ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
- Processor #3 7:14 APIC version 21
- ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
- Processor #5 7:14 APIC version 21
- ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
- Processor #7 7:14 APIC version 21
- ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
- ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
- ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
- ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
- ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
- ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
- ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
- ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
- ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Setting APIC routing to physical flat
- ACPI: HPET id: 0x8086a701 base: 0xfed00000
- Using ACPI (MADT) for SMP configuration information
- Nosave address range: 000000000009e000 - 000000000009f000
- Nosave address range: 000000000009f000 - 00000000000a0000
- Nosave address range: 00000000000a0000 - 00000000000e4000
- Nosave address range: 00000000000e4000 - 0000000000100000
- Nosave address range: 00000000bfe70000 - 00000000bfe88000
- Nosave address range: 00000000bfe88000 - 00000000bfedc000
- Nosave address range: 00000000bfedc000 - 00000000c0000000
- Nosave address range: 00000000c0000000 - 00000000fee00000
- Nosave address range: 00000000fee00000 - 00000000fee01000
- Nosave address range: 00000000fee01000 - 00000000ffe00000
- Nosave address range: 00000000ffe00000 - 0000000100000000
- Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)
- SMP: Allowing 16 CPUs, 8 hotplug CPUs
- Built 1 zonelists. Total pages: 4131600
- Kernel command line: ro root=/dev/VolGroup00/LogVol00
- Initializing CPU#0
- PID hash table entries: 4096 (order: 12, 32768 bytes)
- Console: colour VGA+ 80x25
- Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- Checking aperture...
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- Placing software IO TLB between 0x28a0000 - 0x68a0000
- Memory: 16431636k/17825792k available (2494k kernel code, 343588k reserved, 1263k data, 200k init)
- Calibrating delay using timer specific routine.. 5889.48 BogoMIPS (lpj=2944741)
- Security Framework v1.0.0 initialized
- SELinux: Initializing.
- SELinux: Starting in permissive mode
- selinux_register_security: Registering secondary module capability
- Capability LSM initialized as secondary
- Mount-cache hash table entries: 256
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 8192K
- using mwait in idle threads.
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- CPU0: Thermal monitoring enabled (TM1)
- SMP alternatives: switching to UP code
- ACPI: Core revision 20060707
- Using local APIC timer interrupts.
- result 8359648
- Detected 8.359 MHz APIC timer.
- SMP alternatives: switching to SMP code
- Booting processor 1/8 APIC 0x2
- Initializing CPU#1
- Calibrating delay using timer specific routine.. 5884.97 BogoMIPS (lpj=2942485)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 8192K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 1
- CPU1: Thermal monitoring enabled (TM1)
- Intel(R) Core(TM) CPU 870 @ 2.93GHz stepping 05
- SMP alternatives: switching to SMP code
- Booting processor 2/8 APIC 0x4
- Initializing CPU#2
- Calibrating delay using timer specific routine.. 5884.79 BogoMIPS (lpj=2942399)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 8192K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 2
- CPU2: Thermal monitoring enabled (TM1)
- Intel(R) Core(TM) CPU 870 @ 2.93GHz stepping 05
- SMP alternatives: switching to SMP code
- Booting processor 3/8 APIC 0x6
- Initializing CPU#3
- Calibrating delay using timer specific routine.. 5884.80 BogoMIPS (lpj=2942400)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 8192K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 3
- CPU3: Thermal monitoring enabled (TM1)
- Intel(R) Core(TM) CPU 870 @ 2.93GHz stepping 05
- SMP alternatives: switching to SMP code
- Booting processor 4/8 APIC 0x1
- Initializing CPU#4
- Calibrating delay using timer specific routine.. 5885.13 BogoMIPS (lpj=2942566)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 8192K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- CPU4: Thermal monitoring enabled (TM1)
- Intel(R) Core(TM) CPU 870 @ 2.93GHz stepping 05
- SMP alternatives: switching to SMP code
- Booting processor 5/8 APIC 0x3
- Initializing CPU#5
- Calibrating delay using timer specific routine.. 5884.88 BogoMIPS (lpj=2942442)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 8192K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 1
- CPU5: Thermal monitoring enabled (TM1)
- Intel(R) Core(TM) CPU 870 @ 2.93GHz stepping 05
- SMP alternatives: switching to SMP code
- Booting processor 6/8 APIC 0x5
- Initializing CPU#6
- Calibrating delay using timer specific routine.. 5884.79 BogoMIPS (lpj=2942399)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 8192K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 2
- CPU6: Thermal monitoring enabled (TM1)
- Intel(R) Core(TM) CPU 870 @ 2.93GHz stepping 05
- SMP alternatives: switching to SMP code
- Booting processor 7/8 APIC 0x7
- Initializing CPU#7
- Calibrating delay using timer specific routine.. 5884.80 BogoMIPS (lpj=2942401)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 8192K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 3
- CPU7: Thermal monitoring enabled (TM1)
- Intel(R) Core(TM) CPU 870 @ 2.93GHz stepping 05
- Brought up 8 CPUs
- testing NMI watchdog ... OK.
- time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
- time.c: Detected 2942.606 MHz processor.
- sizeof(vma)=176 bytes
- sizeof(page)=56 bytes
- sizeof(inode)=560 bytes
- sizeof(dentry)=216 bytes
- sizeof(ext3inode)=760 bytes
- sizeof(buffer_head)=96 bytes
- sizeof(skbuff)=240 bytes
- migration_cost=1,15
- checking if image is initramfs... it is
- Freeing initrd memory: 3275k freed
- NET: Registered protocol family 16
- No dock devices found.
- ACPI: bus type pci registered
- PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
- PCI: Not using MMCONFIG.
- PCI: Using configuration type 1
- ACPI: Interpreter enabled
- ACPI: Using IOAPIC for interrupt routing
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- Boot video device is 0000:01:00.0
- PCI: Transparent bridge - 0000:00:1e.0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
- ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode.
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
- ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
- Linux Plug and Play Support v0.97 (c) Adam Belay
- pnp: PnP ACPI init
- pnp: PnP ACPI: found 16 devices
- usbcore: registered new driver usbfs
- usbcore: registered new driver hub
- PCI: Using ACPI for IRQ routing
- PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0, 0, 0, 0, 0
- hpet0: 8 64-bit timers, 14318180 Hz
- PCI-GART: No AMD northbridge found.
- pnp: 00:06: ioport range 0x290-0x29f has been reserved
- PCI: Bridge: 0000:00:03.0
- IO window: 9000-9fff
- MEM window: f7900000-f79fffff
- PREFETCH window: c0000000-cfffffff
- PCI: Bridge: 0000:00:1c.0
- IO window: c000-cfff
- MEM window: f7c00000-f7cfffff
- PREFETCH window: e0000000-efffffff
- PCI: Bridge: 0000:00:1c.4
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1c.5
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: dff00000-dfffffff
- PCI: Bridge: 0000:00:1c.6
- IO window: b000-bfff
- MEM window: f7b00000-f7bfffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1c.7
- IO window: a000-afff
- MEM window: f7a00000-f7afffff
- PREFETCH window: dfe00000-dfefffff
- PCI: Bridge: 0000:07:03.0
- IO window: e000-efff
- MEM window: f7e00000-f7ffffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1e.0
- IO window: d000-efff
- MEM window: f7d00000-f7ffffff
- PREFETCH window: disabled.
- GSI 16 sharing vector 0xA9 and IRQ 16
- ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:03.0 to 64
- GSI 17 sharing vector 0xB1 and IRQ 17
- ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
- PCI: Setting latency timer of device 0000:00:1c.4 to 64
- ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:1c.5 to 64
- GSI 18 sharing vector 0xB9 and IRQ 18
- ACPI: PCI Interrupt 0000:00:1c.6[C] -> GSI 18 (level, low) -> IRQ 185
- PCI: Setting latency timer of device 0000:00:1c.6 to 64
- GSI 19 sharing vector 0xC1 and IRQ 19
- ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ 193
- PCI: Setting latency timer of device 0000:00:1c.7 to 64
- PCI: Setting latency timer of device 0000:00:1e.0 to 64
- NET: Registered protocol family 2
- IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
- TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 262144 bind 65536)
- TCP reno registered
- audit: initializing netlink socket (disabled)
- type=2000 audit(1383939209.171:1): initialized
- Total HugeTLB memory allocated, 0
- VFS: Disk quotas dquot_6.5.1
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- SELinux: Registering netfilter hooks
- Initializing Cryptographic API
- alg: No test for crc32c (crc32c-generic)
- ksign: Installing public key data
- Loading keyring
- - Added public key 75ED35FE9471DC0E
- - User ID: CentOS (Kernel Module GPG key)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- PCI: Setting latency timer of device 0000:00:03.0 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:03.0:pcie00]
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:1c.0:pcie00]
- Allocate Port Service[0000:00:1c.0:pcie02]
- PCI: Setting latency timer of device 0000:00:1c.4 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:1c.4:pcie00]
- Allocate Port Service[0000:00:1c.4:pcie02]
- PCI: Setting latency timer of device 0000:00:1c.5 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:1c.5:pcie00]
- Allocate Port Service[0000:00:1c.5:pcie02]
- PCI: Setting latency timer of device 0000:00:1c.6 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:1c.6:pcie00]
- Allocate Port Service[0000:00:1c.6:pcie02]
- PCI: Setting latency timer of device 0000:00:1c.7 to 64
- assign_interrupt_mode Found MSI capability
- Allocate Port Service[0000:00:1c.7:pcie00]
- Allocate Port Service[0000:00:1c.7:pcie02]
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P001Ist] [20060707]
- ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P001Cst] [20060707]
- ACPI: CPU0 (power states: C1[C1] C2[C2])
- ACPI: CPU1 (power states: C1[C1] C2[C2])
- ACPI: CPU2 (power states: C1[C1] C2[C2])
- ACPI: CPU3 (power states: C1[C1] C2[C2])
- ACPI: CPU4 (power states: C1[C1] C2[C2])
- ACPI: CPU5 (power states: C1[C1] C2[C2])
- ACPI: CPU6 (power states: C1[C1] C2[C2])
- ACPI: CPU7 (power states: C1[C1] C2[C2])
- Real Time Clock Driver v1.12ac
- hpet_resources: 0xfed00000 is busy
- Non-volatile memory driver v1.2
- Linux agpgart interface v0.101 (c) Dave Jones
- Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- JMB363: IDE controller at PCI slot 0000:03:00.1
- PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
- ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 19 (level, low) -> IRQ 193
- JMB363: chipset revision 3
- JMB363: 100% native mode on irq 193
- PCI: Setting latency timer of device 0000:03:00.1 to 64
- ide2: BM-DMA at 0xb400-0xb407, BIOS settings: hde:pio, hdf:pio
- ide3: BM-DMA at 0xb408-0xb40f, BIOS settings: hdg:pio, hdh:pio
- Probing IDE interface ide2...
- Probing IDE interface ide3...
- Probing IDE interface ide0...
- Probing IDE interface ide1...
- Probing IDE interface ide2...
- Probing IDE interface ide3...
- ide-floppy driver 0.99.newide
- usbcore: registered new driver hiddev
- usbcore: registered new driver usbhid
- drivers/usb/input/hid-core.c: v2.6:USB HID core driver
- PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- PNP: PS/2 controller doesn't have AUX irq; using default 12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
- md: bitmap version 4.39
- TCP bic registered
- Initializing IPsec netlink socket
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- ACPI: (supports S0 S1 S3 S4 S5)
- Freeing unused kernel memory: 200k freed
- Write protecting the kernel read-only data: 482k
- input: AT Translated Set 2 keyboard as /class/input/input0
- ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:1a.0 to 64
- ehci_hcd 0000:00:1a.0: EHCI Host Controller
- ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1a.0: debug port 2
- PCI: cache line size of 32 is not supported by device 0000:00:1a.0
- ehci_hcd 0000:00:1a.0: irq 169, io mem 0xf78fe000
- ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- GSI 20 sharing vector 0x42 and IRQ 20
- ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 66
- PCI: Setting latency timer of device 0000:00:1d.0 to 64
- ehci_hcd 0000:00:1d.0: EHCI Host Controller
- ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- ehci_hcd 0000:00:1d.0: debug port 2
- PCI: cache line size of 32 is not supported by device 0000:00:1d.0
- ehci_hcd 0000:00:1d.0: irq 66, io mem 0xf78fd000
- ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
- USB Universal Host Controller Interface driver v3.0
- SCSI subsystem initialized
- Initializing USB Mass Storage driver...
- usb 1-1: new high speed USB device using ehci_hcd and address 2
- usb 1-1: configuration #1 chosen from 1 choice
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 6 ports detected
- usb 2-1: new high speed USB device using ehci_hcd and address 2
- usb 2-1: configuration #1 chosen from 1 choice
- hub 2-1:1.0: USB hub found
- hub 2-1:1.0: 8 ports detected
- usb 1-1.1: new low speed USB device using ehci_hcd and address 3
- usb 1-1.1: configuration #1 chosen from 1 choice
- input: Logitech NetPlay Keyboard as /class/input/input1
- input: USB HID v1.10 Keyboard [Logitech NetPlay Keyboard] on usb-0000:00:1a.0-1.1
- usb 1-1.2: new high speed USB device using ehci_hcd and address 4
- usb 1-1.2: configuration #1 chosen from 1 choice
- usb 1-1.3: new high speed USB device using ehci_hcd and address 5
- usb 1-1.3: configuration #1 chosen from 1 choice
- scsi0 : SCSI emulation for USB Mass Storage devices
- usb-storage: device found at 4
- usb-storage: waiting for device to settle before scanning
- scsi1 : SCSI emulation for USB Mass Storage devices
- usb-storage: device found at 5
- usb-storage: waiting for device to settle before scanning
- usbcore: registered new driver usb-storage
- USB Mass Storage support registered.
- Vendor: Kin<5> Vendor: Generic Model: USB SD Reader Rev: 1.00
- Type: Direct-Access ANSI SCSI revision: 00
- gston Model: DT Ultimate G2 Rev: PMAP
- Type: Direct-Access ANSI SCSI revision: 00
- SCSI device sdb: 31293440 512-byte hdwr sectors (16022 MB)
- sdb: Write Protect is off
- sdb: Mode Sense: 23 00 00 00
- sdb: assuming drive cache: write through
- sd 1:0:0:0: Attached scsi removable disk sda
- Vendor: Generic Model: USB CF Reader Rev: 1.01
- Type: Direct-Access ANSI SCSI revision: 00
- SCSI device sdb: 31293440 512-byte hdwr sectors (16022 MB)
- sdb: Write Protect is off
- sdb: Mode Sense: 23 00 00 00
- sdb: assuming drive cache: write through
- sdb:<5>sd 1:0:0:1: Attached scsi removable disk sdc
- Vendor: Generic Model: USB SM Reader Rev: 1.02
- Type: Direct-Access ANSI SCSI revision: 00
- sd 1:0:0:2: Attached scsi removable disk sdd
- Vendor: Generic Model: USB MS Reader Rev: 1.03
- Type: Direct-Access ANSI SCSI revision: 00
- sd 1:0:0:3: Attached scsi removable disk sde
- usb-storage: device scan complete
- sdb1 sdb2
- sd 0:0:0:0: Attached scsi removable disk sdb
- usb-storage: device scan complete
- libata version 3.00 loaded.
- ahci 0000:00:1f.2: version 3.0
- GSI 21 sharing vector 0x4A and IRQ 21
- ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 21 (level, low) -> IRQ 74
- ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
- ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
- PCI: Setting latency timer of device 0000:00:1f.2 to 64
- scsi2 : ahci
- scsi3 : ahci
- scsi4 : ahci
- scsi5 : ahci
- scsi6 : ahci
- scsi7 : ahci
- ata1: SATA max UDMA/133 abar m2048@0xf78f7000 port 0xf78f7100 irq 82
- ata2: SATA max UDMA/133 abar m2048@0xf78f7000 port 0xf78f7180 irq 82
- ata3: SATA max UDMA/133 abar m2048@0xf78f7000 port 0xf78f7200 irq 82
- ata4: SATA max UDMA/133 abar m2048@0xf78f7000 port 0xf78f7280 irq 82
- ata5: SATA max UDMA/133 abar m2048@0xf78f7000 port 0xf78f7300 irq 82
- ata6: SATA max UDMA/133 abar m2048@0xf78f7000 port 0xf78f7380 irq 82
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata1.00: ATA-8: WDC WD5000AAKX-08ERMA0, 19.01H19, max UDMA/100
- ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- ata1.00: configured for UDMA/100
- ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata2.00: ATA-8: ST3750528AS, CC38, max UDMA/133
- ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- ata2.00: configured for UDMA/133
- ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
- ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- ata3.00: configured for UDMA/133
- ata4: SATA link down (SStatus 0 SControl 300)
- ata5: SATA link down (SStatus 0 SControl 300)
- ata6: SATA link down (SStatus 0 SControl 300)
- Vendor: ATA Model: WDC WD5000AAKX-0 Rev: 19.0
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sdf: 976773168 512-byte hdwr sectors (500108 MB)
- sdf: Write Protect is off
- sdf: Mode Sense: 00 3a 00 00
- SCSI device sdf: drive cache: write back
- SCSI device sdf: 976773168 512-byte hdwr sectors (500108 MB)
- sdf: Write Protect is off
- sdf: Mode Sense: 00 3a 00 00
- SCSI device sdf: drive cache: write back
- sdf: sdf1 sdf2 sdf3 < sdf5 sdf6 sdf7 >
- sd 2:0:0:0: Attached scsi disk sdf
- Vendor: ATA Model: ST3750528AS Rev: CC38
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sdg: 1465149168 512-byte hdwr sectors (750156 MB)
- sdg: Write Protect is off
- sdg: Mode Sense: 00 3a 00 00
- SCSI device sdg: drive cache: write back
- SCSI device sdg: 1465149168 512-byte hdwr sectors (750156 MB)
- sdg: Write Protect is off
- sdg: Mode Sense: 00 3a 00 00
- SCSI device sdg: drive cache: write back
- sdg: sdg1 sdg2 sdg3 sdg5 sdg6 sdg7 sdg8 sdg9
- sd 3:0:0:0: Attached scsi disk sdg
- Vendor: ATA Model: WDC WD10EADS-00L Rev: 01.0
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sdh: 1953525168 512-byte hdwr sectors (1000205 MB)
- sdh: Write Protect is off
- sdh: Mode Sense: 00 3a 00 00
- SCSI device sdh: drive cache: write back
- SCSI device sdh: 1953525168 512-byte hdwr sectors (1000205 MB)
- sdh: Write Protect is off
- sdh: Mode Sense: 00 3a 00 00
- SCSI device sdh: drive cache: write back
- sdh: sdh1
- sd 4:0:0:0: Attached scsi disk sdh
- ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 185
- ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
- ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
- PCI: Setting latency timer of device 0000:03:00.0 to 64
- scsi8 : ahci
- scsi9 : ahci
- ata7: SATA max UDMA/133 abar m8192@0xf7bfe000 port 0xf7bfe100 irq 185
- ata8: SATA max UDMA/133 abar m8192@0xf7bfe000 port 0xf7bfe180 irq 185
- ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata7.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33, ATAPI AN
- ata7.00: applying bridge limits
- ata7.00: configured for UDMA/33
- ata8: SATA link down (SStatus 0 SControl 300)
- Vendor: TSSTcorp Model: CD/DVDW SH-S183L Rev: SB01
- Type: CD-ROM ANSI SCSI revision: 05
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
- device-mapper: dm-raid45: initialized v0.2429
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: mounted filesystem with ordered data mode.
- type=1404 audit(1383939248.918:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- security: 3 users, 6 roles, 1914 types, 234 bools, 1 sens, 1024 cats
- security: 61 classes, 69080 rules
- SELinux: Completing initialization.
- SELinux: Setting up existing superblocks.
- SELinux: initialized (dev dm-0, type ext3), uses xattr
- SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
- SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
- SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
- SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
- SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
- SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
- SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
- SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
- SELinux: initialized (dev proc, type proc), uses genfs_contexts
- SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
- SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- type=1403 audit(1383939249.067:3): policy loaded auid=4294967295 ses=4294967295
- sd 1:0:0:0: Attached scsi generic sg0 type 0
- sd 1:0:0:1: Attached scsi generic sg1 type 0
- sd 1:0:0:2: Attached scsi generic sg2 type 0
- sd 1:0:0:3: Attached scsi generic sg3 type 0
- sd 0:0:0:0: Attached scsi generic sg4 type 0
- sd 2:0:0:0: Attached scsi generic sg5 type 0
- sd 3:0:0:0: Attached scsi generic sg6 type 0
- sd 4:0:0:0: Attached scsi generic sg7 type 0
- scsi 8:0:0:0: Attached scsi generic sg8 type 5
- input: PC Speaker as /class/input/input2
- r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 193
- PCI: Setting latency timer of device 0000:02:00.0 to 64
- eth0: RTL8168d/8111d at 0xffffc20000038000, 00:26:18:fe:73:4f, XID 283000c0 IRQ 90
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- Linux Tulip driver version 1.1.13 (May 11, 2002)
- ACPI: PCI Interrupt 0000:08:04.0[A] -> GSI 18 (level, low) -> IRQ 185
- tulip0: EEPROM default media type Autosense.
- tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
- tulip0: MII transceiver #1 config 3100 status 7849 advertising 01e1.
- eth1: Digital DS21143 Tulip rev 65 at ffffc20000058000, 00:80:C8:CD:42:E9, IRQ 185.
- ACPI: PCI Interrupt 0000:08:05.0[A] -> GSI 19 (level, low) -> IRQ 193
- tulip1: EEPROM default media type Autosense.
- tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
- ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 185
- tulip1: MII transceiver #1 config 3100 status 7849 advertising 01e1.
- eth2: Digital DS21143 Tulip rev 65 at ffffc2000003a000, 00:80:C8:CD:42:EA, IRQ 193.
- ACPI: PCI Interrupt 0000:08:06.0[A] -> GSI 16 (level, low) -> IRQ 169
- tulip2: EEPROM default media type Autosense.
- tulip2: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
- tulip2: MII transceiver #1 config 3100 status 7849 advertising 01e1.
- eth3: Digital DS21143 Tulip rev 65 at ffffc2000003c000, 00:80:C8:CD:42:EB, IRQ 169.
- ACPI: PCI Interrupt 0000:08:07.0[A] -> GSI 17 (level, low) -> IRQ 177
- tulip3: EEPROM default media type Autosense.
- tulip3: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
- tulip3: MII transceiver #1 config 3100 status 7849 advertising 01e1.
- eth4: Digital DS21143 Tulip rev 65 at ffffc2000003e000, 00:80:C8:CD:42:EC, IRQ 177.
- GSI 22 sharing vector 0x62 and IRQ 22
- ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 98
- PCI: Setting latency timer of device 0000:00:1b.0 to 64
- sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
- Uniform CD-ROM driver Revision: 3.20
- sr 8:0:0:0: Attached scsi CD-ROM sr0
- floppy0: no floppy controllers found
- lp: driver loaded but no devices found
- ACPI: Power Button (FF) [PWRF]
- ACPI: Power Button (CM) [PWRB]
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: ... autorun DONE.
- device-mapper: multipath: version 1.0.5 loaded
- EXT3 FS on dm-0, internal journal
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on sdb1, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- SELinux: initialized (dev sdb1, type ext3), uses xattr
- SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- Adding 7667704k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:7667704k
- SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
- IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- IPv6 over IPv4 tunneling driver
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- ip_tables: (C) 2000-2006 Netfilter Core Team
- Netfilter messages via NETLINK v0.30.
- ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
- r8169: eth4: link up
- r8169: eth4: link up
- eth4: no IPv6 routers present
- SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
- Bluetooth: Core ver 2.10
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP ver 2.8
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM ver 1.8
- Bluetooth: HIDP (Human Interface Emulation) ver 1.1
- SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
- SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
- SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
- [root@localhost ~]#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement