mcdull

[    0.000000] Linux version 2.6.27-00877-g5bab48d (GlemSom@autobuild-service_20100217_162729) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #1 PREEMPT Wed Feb 17 16:30:44 CET 2010

[    0.000000] CPU: ARMv6-compatible processor [4117b362] revision 2 (ARMv6TEJ), cr=00c5387f

[    0.000000] Machine: HTC blackstone cellphone (aka HTC Touch HD)

[    0.000000] fixup: nr_banks = 2

[    0.000000] fixup: bank0 start=10000000, node=00000000, size=06b00000

[    0.000000] fixup: bank1 start=20000000, node=00000000, size=04d00000

[    0.000000] Ignoring unrecognised tag 0x00000000

[    0.000000] Memory policy: ECC disabled, Data cache writeback

[    0.000000] On node 0 totalpages: 47104

[    0.000000] free_area_init_node: node 0, pgdat c02f9b9c, node_mem_map c06d8000

[    0.000000]   DMA zone: 46438 pages, LIFO batch:15

[    0.000000] CPU0: D VIPT write-back cache

[    0.000000] CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets

[    0.000000] CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 46438

[    0.000000] Kernel command line: lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=528 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3

[    0.000000] Unknown boot option `lcd.density=240': ignoring

[    0.000000] Unknown boot option `clock-7x00.a11=528': ignoring

[    0.000000] Unknown boot option `pmem.extra=1': ignoring

[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)

[    0.000244] Console: colour dummy device 80x30

[    0.000274] console [tty0] enabled

[    0.001251] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.002502] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

[    0.020416] Memory: 107MB 77MB = 184MB total

[    0.020507] Memory: 180344KB available (2720K code, 1301K data, 120K init)

[    0.021667] Calibrating delay loop... 527.56 BogoMIPS (lpj=2637824)

[    0.270965] Mount-cache hash table entries: 512

[    0.272308] CPU: Testing write buffer coherency: ok

[    0.275268] net_namespace: 804 bytes

[    0.276763] NET: Registered protocol family 16

[    0.277832] acpu_clock_init()

[    0.277954] ACPU running at 528000 KHz

[    0.277984] msm_proc_comm_wince_init: WinCE PCOM initialized.

[    0.278076] PLL0 @ f8005300: MODE=00000007 L=0000000c M=00000004 N=00000005 freq=245760000 Hz (245 MHz)

[    0.278167] PLL1 @ f800531c: MODE=00000007 L=00000028 M=00000000 N=00000001 freq=768000000 Hz (768 MHz)

[    0.278259] PLL2 @ f8005338: MODE=00000007 L=00000037 M=00000000 N=00000001 freq=1056000000 Hz (1056 MHz)

[    0.278350] PLL3 @ f8005354: MODE=00000000 L=0000002d M=00000000 N=00000001 freq=864000000 Hz (864 MHz)

[    0.278411] PCB XC: 00000003

[    0.278442] AMSS version: 52.64.25.34U

[    0.279998] vreg_get: gp6 -> 23

[    0.280029] vreg_get: msmp -> 1

[    0.280029] vreg_get: msme1 -> 2

[    0.280059] vreg_get: rftx -> 11

[    0.280059] MMC: WiFi device enable

[    0.280303] MMC: SD-Card interface enable

[    0.736358] msm_i2c_probe

[    0.736602] msm_i2c_probe: clk_ctl 35d, 100000 Hz

[    0.737579] msm_i2c msm_i2c.0: IRQ but nothing to do!, status 0

[    0.761169] Bluetooth: Core ver 2.13

[    0.761962] NET: Registered protocol family 31

[    0.762023] Bluetooth: HCI device and connection manager initialized

[    0.762115] Bluetooth: HCI socket layer initialized

[    0.764953] NET: Registered protocol family 2

[    0.851562] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.852569] TCP established hash table entries: 8192 (order: 4, 65536 bytes)

[    0.853210] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

[    0.853546] TCP: Hash tables configured (established 8192 bind 8192)

[    0.853607] TCP reno registered

[    0.881652] NET: Registered protocol family 1

[    0.882690] Unpacking initramfs... done

[    1.552612] Freeing initrd memory: 1854K

[    1.553436] [HTC] htc_hw_init: Initializing HTC hardware platform driver

[    1.553802] [HTC] htc_hw_probe: done

[    1.554809] smd_init()

[    1.554901] smd_core_init()

[    1.555023] smd_core_init() done

[    1.555572] smd_alloc_channel() 'SMD_DS' cid=0

[    1.555908] smd_alloc_channel() 'SMD_RPCCALL' cid=2

[    1.556182] smd_alloc_channel() 'SMD_CONTROL' cid=5

[    1.556396] smd_alloc_channel() 'SMD_DATA1' cid=7

[    1.556610] smd_alloc_channel() 'SMD_DATA2' cid=8

[    1.556823] smd_alloc_channel() 'SMD_DATA3' cid=9

[    1.557067] smd_alloc_channel() 'SMD_DATA9' cid=15

[    1.557312] smd_alloc_channel() 'SMD_DATA11' cid=17

[    1.557556] smd_alloc_channel() 'SMD_GPSNMEA' cid=27

[    1.558746] RPC rpcrouter_init

[    1.559539] RPC_dev init complete!

[    1.559570] RPC Init done

[    1.559661] RPCCALL opened

[    1.559692] [RR] send control message cmd=3 srv.cmd=3 prog=00000000:0 id=0:00000000

[    1.614196] [RR] send control message cmd=2 srv.cmd=2 prog=00000000:0 id=0:00000000

[    1.614898] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.614990] [RR] o NEW_SERVER id=0:00000001 prog=30000025:0

[    1.615539] rpcrouter_create_server: 30000025:0

[    1.616058] rpcrouter_create_server: rs30000025:00000000

[    1.616180] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.616302] [RR] o NEW_SERVER id=0:00000001 prog=30000043:0

[    1.616851] rpcrouter_create_server: 30000043:0

[    1.617309] rpcrouter_create_server: rs30000043:00000000

[    1.617431] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.617553] [RR] o NEW_SERVER id=0:00000001 prog=30000005:0

[    1.618041] rpcrouter_create_server: 30000005:0

[    1.618499] rpcrouter_create_server: rs30000005:00000000

[    1.618621] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.618713] [RR] o NEW_SERVER id=0:00000001 prog=30000061:0

[    1.619201] rpcrouter_create_server: 30000061:0

[    1.619628] rpcrouter_create_server: rs30000061:00000000

[    1.619750] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.619873] [RR] o NEW_SERVER id=0:00000001 prog=30000003:0

[    1.620300] rpcrouter_create_server: 30000003:0

[    1.620697] rpcrouter_create_server: rs30000003:00000000

[    1.620819] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.620941] [RR] o NEW_SERVER id=0:00000001 prog=30000060:0

[    1.621398] rpcrouter_create_server: 30000060:0

[    1.621826] rpcrouter_create_server: rs30000060:00000000

[    1.621917] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.622009] [RR] o NEW_SERVER id=0:00000001 prog=3000005f:0

[    1.622375] rpcrouter_create_server: 3000005f:0

[    1.622680] rpcrouter_create_server: rs3000005f:00000000

[    1.622772] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.622863] [RR] o NEW_SERVER id=0:00000001 prog=30000021:0

[    1.623199] rpcrouter_create_server: 30000021:0

[    1.623474] rpcrouter_create_server: rs30000021:00000000

[    1.623565] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.623657] [RR] o NEW_SERVER id=0:00000001 prog=30000002:0

[    1.623962] rpcrouter_create_server: 30000002:0

[    1.624389] rpcrouter_create_server: rs30000002:00000000

[    1.624511] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.624603] [RR] o NEW_SERVER id=0:00000001 prog=3000fffe:0

[    1.624908] rpcrouter_create_server: 3000fffe:0

[    1.625244] rpcrouter_create_server: rs3000fffe:00000000

[    1.625335] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.625427] [RR] o NEW_SERVER id=0:00000001 prog=3000001f:0

[    1.625732] rpcrouter_create_server: 3000001f:0

[    1.626068] rpcrouter_create_server: rs3000001f:00000000

[    1.626129] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.626251] [RR] o NEW_SERVER id=0:00000001 prog=30000000:0

[    1.626586] rpcrouter_create_server: 30000000:0

[    1.626892] rpcrouter_create_server: rs30000000:00000000

[    1.626983] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.627075] [RR] o NEW_SERVER id=0:00000001 prog=3000001d:0

[    1.627380] rpcrouter_create_server: 3000001d:0

[    1.627685] rpcrouter_create_server: rs3000001d:00000000

[    1.627777] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.627868] [RR] o NEW_SERVER id=0:00000001 prog=3000005b:0

[    1.628204] rpcrouter_create_server: 3000005b:0

[    1.628479] rpcrouter_create_server: rs3000005b:00000000

[    1.628570] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.628662] [RR] o NEW_SERVER id=0:00000001 prog=3000003c:0

[    1.628997] rpcrouter_create_server: 3000003c:0

[    1.629302] rpcrouter_create_server: rs3000003c:00000000

[    1.629394] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.629486] [RR] o NEW_SERVER id=0:00000001 prog=3000003b:0

[    1.629913] rpcrouter_create_server: 3000003b:0

[    1.630249] rpcrouter_create_server: rs3000003b:00000000

[    1.630340] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.630432] [RR] o NEW_SERVER id=0:00000001 prog=3000005a:0

[    1.630798] rpcrouter_create_server: 3000005a:0

[    1.631134] rpcrouter_create_server: rs3000005a:00000000

[    1.631225] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.631317] [RR] o NEW_SERVER id=0:00000001 prog=30000059:0

[    1.631652] rpcrouter_create_server: 30000059:0

[    1.631988] rpcrouter_create_server: rs30000059:00000000

[    1.632049] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.632141] [RR] o NEW_SERVER id=0:00000001 prog=3000001b:0

[    1.632537] rpcrouter_create_server: 3000001b:0

[    1.632873] rpcrouter_create_server: rs3000001b:00000000

[    1.632965] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.633056] [RR] o NEW_SERVER id=0:00000001 prog=30000019:0

[    1.633453] rpcrouter_create_server: 30000019:0

[    1.633789] rpcrouter_create_server: rs30000019:00000000

[    1.633880] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.633972] [RR] o NEW_SERVER id=0:00000001 prog=30000055:0

[    1.634429] rpcrouter_create_server: 30000055:0

[    1.634796] rpcrouter_create_server: rs30000055:00000000

[    1.634887] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.634979] [RR] o NEW_SERVER id=0:00000001 prog=30000016:0

[    1.635345] rpcrouter_create_server: 30000016:0

[    1.635681] rpcrouter_create_server: rs30000016:00000000

[    1.635772] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.635864] [RR] o NEW_SERVER id=0:00000001 prog=30000053:0

[    1.636230] rpcrouter_create_server: 30000053:0

[    1.636566] rpcrouter_create_server: rs30000053:00000000

[    1.636657] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.636749] [RR] o NEW_SERVER id=0:00000001 prog=30000014:0

[    1.637145] rpcrouter_create_server: 30000014:0

[    1.637573] rpcrouter_create_server: rs30000014:00000000

[    1.637664] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.637756] [RR] o NEW_SERVER id=0:00000001 prog=30000051:0

[    1.638122] rpcrouter_create_server: 30000051:0

[    1.638458] rpcrouter_create_server: rs30000051:00000000

[    1.638549] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.638671] [RR] o NEW_SERVER id=0:00000001 prog=30000013:0

[    1.639038] rpcrouter_create_server: 30000013:0

[    1.639373] rpcrouter_create_server: rs30000013:00000000

[    1.639465] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.639556] [RR] o NEW_SERVER id=0:00000001 prog=30000012:0

[    1.639923] rpcrouter_create_server: 30000012:0

[    1.640258] rpcrouter_create_server: rs30000012:00000000

[    1.640350] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.640441] [RR] o NEW_SERVER id=0:00000001 prog=30000010:0

[    1.640869] rpcrouter_create_server: 30000010:0

[    1.641235] rpcrouter_create_server: rs30000010:00000000

[    1.641326] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.641418] [RR] o NEW_SERVER id=0:00000001 prog=3000006c:0

[    1.641845] rpcrouter_create_server: 3000006c:0

[    1.642211] rpcrouter_create_server: rs3000006c:00000000

[    1.642303] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.642425] [RR] o NEW_SERVER id=0:00000001 prog=3000000f:0

[    1.642791] rpcrouter_create_server: 3000000f:0

[    1.643157] rpcrouter_create_server: rs3000000f:00000000

[    1.643249] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.643341] [RR] o NEW_SERVER id=0:00000001 prog=3000006b:0

[    1.643737] rpcrouter_create_server: 3000006b:0

[    1.644104] rpcrouter_create_server: rs3000006b:00000000

[    1.644195] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.644287] [RR] o NEW_SERVER id=0:00000001 prog=3000000e:d10ca2da

[    1.644866] rpcrouter_create_server: 3000000e:d10ca2da

[    1.645263] rpcrouter_create_server: rs3000000e:d10ca2da

[    1.645355] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.645477] [RR] o NEW_SERVER id=0:00000001 prog=3000006a:0

[    1.645935] rpcrouter_create_server: 3000006a:0

[    1.646301] rpcrouter_create_server: rs3000006a:00000000

[    1.646392] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.646514] [RR] o NEW_SERVER id=0:00000001 prog=30000068:0

[    1.646942] rpcrouter_create_server: 30000068:0

[    1.647277] rpcrouter_create_server: rs30000068:00000000

[    1.647399] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.647491] [RR] o NEW_SERVER id=0:00000001 prog=30000067:0

[    1.647918] rpcrouter_create_server: 30000067:0

[    1.648284] rpcrouter_create_server: rs30000067:00000000

[    1.648376] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.648468] [RR] o NEW_SERVER id=0:00000001 prog=30000048:0

[    1.648925] rpcrouter_create_server: 30000048:0

[    1.649322] rpcrouter_create_server: rs30000048:00000000

[    1.649414] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.649536] [RR] o NEW_SERVER id=0:00000001 prog=3000000a:0

[    1.649963] rpcrouter_create_server: 3000000a:0

[    1.650390] rpcrouter_create_server: rs3000000a:00000000

[    1.650482] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[    1.650573] [RR] o NEW_SERVER id=0:00000001 prog=30000066:0

[    1.651031] rpcrouter_create_server: 30000066:0

[    1.651397] rpcrouter_create_server: rs30000066:00000000

[    1.674530] [RR] o HELLO

[    1.674621] [RR] x HELLO

[    1.674652] [RR] send control message cmd=4 srv.cmd=4 prog=3000fffe:1 id=1:fadefade

[    1.674743] [RR] x NEW_SERVER 3000fffe

[    1.674804] [RR] x NEW_SERVER id=0:00000001 prog=30000025:0

[    1.674835] [RR] send control message cmd=4 srv.cmd=4 prog=30000025:0 id=0:00000001

[    1.674926] [RR] x NEW_SERVER id=0:00000001 prog=30000043:0

[    1.674987] [RR] send control message cmd=4 srv.cmd=4 prog=30000043:0 id=0:00000001

[    1.675048] [RR] x NEW_SERVER id=0:00000001 prog=30000005:0

[    1.675109] [RR] send control message cmd=4 srv.cmd=4 prog=30000005:0 id=0:00000001

[    1.675201] [RR] x NEW_SERVER id=0:00000001 prog=30000061:0

[    1.675231] [RR] send control message cmd=4 srv.cmd=4 prog=30000061:0 id=0:00000001

[    1.675323] [RR] x NEW_SERVER id=0:00000001 prog=30000003:0

[    1.675384] [RR] send control message cmd=4 srv.cmd=4 prog=30000003:0 id=0:00000001

[    1.675445] [RR] x NEW_SERVER id=0:00000001 prog=30000060:0

[    1.675506] [RR] send control message cmd=4 srv.cmd=4 prog=30000060:0 id=0:00000001

[    1.675567] [RR] x NEW_SERVER id=0:00000001 prog=3000005f:0

[    1.675628] [RR] send control message cmd=4 srv.cmd=4 prog=3000005f:0 id=0:00000001

[    1.675720] [RR] x NEW_SERVER id=0:00000001 prog=30000021:0

[    1.675781] [RR] send control message cmd=4 srv.cmd=4 prog=30000021:0 id=0:00000001

[    1.675842] [RR] x NEW_SERVER id=0:00000001 prog=30000002:0

[    1.675903] [RR] send control message cmd=4 srv.cmd=4 prog=30000002:0 id=0:00000001

[    1.675964] [RR] x NEW_SERVER id=0:00000001 prog=3000fffe:0

[    1.676025] [RR] send control message cmd=4 srv.cmd=4 prog=3000fffe:0 id=0:00000001

[    1.676116] [RR] x NEW_SERVER id=0:00000001 prog=3000001f:0

[    1.676147] [RR] send control message cmd=4 srv.cmd=4 prog=3000001f:0 id=0:00000001

[    1.676239] [RR] x NEW_SERVER id=0:00000001 prog=30000000:0

[    1.676300] [RR] send control message cmd=4 srv.cmd=4 prog=30000000:0 id=0:00000001

[    1.676361] [RR] x NEW_SERVER id=0:00000001 prog=3000001d:0

[    1.676422] [RR] send control message cmd=4 srv.cmd=4 prog=3000001d:0 id=0:00000001

[    1.676483] [RR] x NEW_SERVER id=0:00000001 prog=3000005b:0

[    1.676544] [RR] send control message cmd=4 srv.cmd=4 prog=3000005b:0 id=0:00000001

[    1.676635] [RR] x NEW_SERVER id=0:00000001 prog=3000003c:0

[    1.676666] [RR] send control message cmd=4 srv.cmd=4 prog=3000003c:0 id=0:00000001

[    1.676757] [RR] x NEW_SERVER id=0:00000001 prog=3000003b:0

[    1.676818] [RR] send control message cmd=4 srv.cmd=4 prog=3000003b:0 id=0:00000001

[    1.676879] [RR] x NEW_SERVER id=0:00000001 prog=3000005a:0

[    1.676940] [RR] send control message cmd=4 srv.cmd=4 prog=3000005a:0 id=0:00000001

[    1.677032] [RR] x NEW_SERVER id=0:00000001 prog=30000059:0

[    1.677062] [RR] send control message cmd=4 srv.cmd=4 prog=30000059:0 id=0:00000001

[    1.677154] [RR] x NEW_SERVER id=0:00000001 prog=3000001b:0

[    1.677215] [RR] send control message cmd=4 srv.cmd=4 prog=3000001b:0 id=0:00000001

[    1.677276] [RR] x NEW_SERVER id=0:00000001 prog=30000019:0

[    1.677337] [RR] send control message cmd=4 srv.cmd=4 prog=30000019:0 id=0:00000001

[    1.677398] [RR] x NEW_SERVER id=0:00000001 prog=30000055:0

[    1.677459] [RR] send control message cmd=4 srv.cmd=4 prog=30000055:0 id=0:00000001

[    1.677551] [RR] x NEW_SERVER id=0:00000001 prog=30000016:0

[    1.677612] [RR] send control message cmd=4 srv.cmd=4 prog=30000016:0 id=0:00000001

[    1.677673] [RR] x NEW_SERVER id=0:00000001 prog=30000053:0

[    1.677734] [RR] send control message cmd=4 srv.cmd=4 prog=30000053:0 id=0:00000001

[    1.677795] [RR] x NEW_SERVER id=0:00000001 prog=30000014:0

[    1.677856] [RR] send control message cmd=4 srv.cmd=4 prog=30000014:0 id=0:00000001

[    1.677947] [RR] x NEW_SERVER id=0:00000001 prog=30000051:0

[    1.677978] [RR] send control message cmd=4 srv.cmd=4 prog=30000051:0 id=0:00000001

[    1.678070] [RR] x NEW_SERVER id=0:00000001 prog=30000013:0

[    1.678131] [RR] send control message cmd=4 srv.cmd=4 prog=30000013:0 id=0:00000001

[    1.678192] [RR] x NEW_SERVER id=0:00000001 prog=30000012:0

[    1.678253] [RR] send control message cmd=4 srv.cmd=4 prog=30000012:0 id=0:00000001

[    1.678344] [RR] x NEW_SERVER id=0:00000001 prog=30000010:0

[    1.678375] [RR] send control message cmd=4 srv.cmd=4 prog=30000010:0 id=0:00000001

[    1.678466] [RR] x NEW_SERVER id=0:00000001 prog=3000006c:0

[    1.678527] [RR] send control message cmd=4 srv.cmd=4 prog=3000006c:0 id=0:00000001

[    1.678588] [RR] x NEW_SERVER id=0:00000001 prog=3000000f:0

[    1.678649] [RR] send control message cmd=4 srv.cmd=4 prog=3000000f:0 id=0:00000001

[    1.678741] [RR] x NEW_SERVER id=0:00000001 prog=3000006b:0

[    1.678771] [RR] send control message cmd=4 srv.cmd=4 prog=3000006b:0 id=0:00000001

[    1.678863] [RR] x NEW_SERVER id=0:00000001 prog=3000000e:d10ca2da

[    1.678924] [RR] send control message cmd=4 srv.cmd=4 prog=3000000e:d10ca2da id=0:00000001

[    1.678985] [RR] x NEW_SERVER id=0:00000001 prog=3000006a:0

[    1.679046] [RR] send control message cmd=4 srv.cmd=4 prog=3000006a:0 id=0:00000001

[    1.679138] [RR] x NEW_SERVER id=0:00000001 prog=30000068:0

[    1.679199] [RR] send control message cmd=4 srv.cmd=4 prog=30000068:0 id=0:00000001

[    1.679260] [RR] x NEW_SERVER id=0:00000001 prog=30000067:0

[    1.679321] [RR] send control message cmd=4 srv.cmd=4 prog=30000067:0 id=0:00000001

[    1.679382] [RR] x NEW_SERVER id=0:00000001 prog=30000048:0

[    1.679443] [RR] send control message cmd=4 srv.cmd=4 prog=30000048:0 id=0:00000001

[    1.679534] [RR] x NEW_SERVER id=0:00000001 prog=3000000a:0

[    1.679565] [RR] send control message cmd=4 srv.cmd=4 prog=3000000a:0 id=0:00000001

[    1.679656] [RR] x NEW_SERVER id=0:00000001 prog=30000066:0

[    1.679718] [RR] send control message cmd=4 srv.cmd=4 prog=30000066:0 id=0:00000001

[    1.784942] rpc_servers_init

[    1.785278] Init amss parameters, found AMSS: 5225

[    1.785369] -msm_rpc_create_server

[    1.785827] [RR] x NEW_SERVER id=1:fadefade prog=3000000b:0

[    1.785919] [RR] send control message cmd=4 srv.cmd=4 prog=3000000b:0 id=1:fadefade

[    1.793060] raphnavi_tp: Registering Raphael NaviPad driver

[    1.793426] htcraphael_init_panel: Initializing panel

[    1.793487] htcraphael_init_panel: disabling raphael panel

[    1.797668] ram_console: got buffer at 8e0000, size 20000

[    1.797882] ram_console: found existing buffer, size 34877, start 34877

[    1.800018] console [ram-1] enabled

[    1.810058] Disabling Diamond Panel

[    1.810119] htcblackstone_init_panel: Initializing panel

[    1.810180] vreg_get: gp2 -> 21

[    1.810211] vreg_get: gp4 -> 7

[    1.810272] clock-wince: pc_clk_set_rate: id=7 rate=19200000

[    1.811737] htctopaz_init_panel: Initializing panel

[    1.811859] htctopaz_init_panel: panel does not apply to this device, aborted

[    1.812469] BT RFK register

[    1.812530] vreg_get: rftx -> 11

[    1.812713] BT RFK probe

[    1.812744]    bluetooth rfkill state   OFF

[    1.812805] msm_gpio_set_function(13, 0)

[    1.812866] msm_gpio_set_function(14, 0)

[    1.812927] msm_gpio_set_function(15, 3)

[    1.812957] msm_gpio_set_function(6c, 0)

[    1.825958] [RPC] READ on ept d485c7a0

[    1.827667] ashmem: initialized

[    1.828826] squashfs: version 3.4 (2008/08/26) Phillip Lougher

[    1.829620] io scheduler noop registered (default)

[    1.829711] io scheduler anticipatory registered

[    1.829772] io scheduler deadline registered

[    1.829986] io scheduler cfq registered

[    1.831085] mddi: init() base=0xd5004000 irq=16

[    1.831359] htcblackstone_mddi_power_client(1)

[    1.831634] mddi cmd send rtd: int 23a000, stat 808063, rtd val 10

[    1.831756] get_smem_clock: state 10d09 clock 0

[    1.831970] mddi: registering panel S1D13774

[    1.832031] mddi: publish:

[    1.833282] mddi_epson_probe

[    1.833526] setup_vsync

[    1.833770] vsync on gpio 97 now 1

[    1.834930] msmfb_probe() installing 480 x 800 panel

[    1.860382] Console: switching to colour frame buffer device 60x100

[    1.920349] msm_serial: driver initialized

[    1.921142] msm_serial_hs.1: ttyHS1 at MMIO 0xa0300000 (irq = 52) is a MSM HS UART

[    1.922302] msm_serial_hs module loaded

[    1.926361] loop: module loaded

[    1.926940] pmem: 1 init

[    1.929504] pmem_adsp: 0 init

[    1.931335] pmem_gpu0: 0 init

[    1.932647] pmem_gpu1: 0 init

[    1.934112] pmem_camera: 0 init

[    1.936187] logger: created 64K log 'log_main'

[    1.936767] logger: created 256K log 'log_events'

[    1.937347] logger: created 64K log 'log_radio'

[    1.937652] PPP generic driver version 2.4.2

[    1.938232] PPP Deflate Compression module registered

[    1.938476] PPP BSD Compression module registered

[    1.939849] allocated dma buffer at ffc0b000, dma_addr 24271000

[    1.940185] read CFG0 = aa5400c0, CFG1 = 6746e

[    1.940399] CFG0 = e85408c0, CFG1 = 4745e

[    1.940551] CFG0: cw/page=3 ud_sz=516 ecc_sz=10 spare_sz=0 num_addr_cycles=5

[    1.940887] NAND_READ_ID = 5590bc2c

[    1.941131] status: e03020

[    1.941253] nandid: 5590bc2c maker 2c device bc

[    1.941467] CFG0: cw/page=3 ud_sz=512 ecc_sz=10 spare_sz=4

[    1.941680] DEV_CMD1: f00f3000

[    1.941833] <6>NAND_EBI2_ECC_BUF_CFG: 1ff

[    1.941986] flash_id: 5590bc2c size 20000000

[    1.942810] usb_probe() io=d5008000, irq=47, dma=ffc0c000(24272000)

[    1.943603] hsusb: IDLE -> ONLINE

[    1.943756] hsusb: reset controller

[    1.998809] usb: notify offline

[    1.999511] usb_function_register: adb

[    2.000122] usb_function_register: usb_mass_storage

[    2.001800] usb_try_to_bind: functions bound. starting.

[    2.002075] usb: suspend

[    2.002380] usb_bind_driver: ether

[    2.003112] usb_mass_storage usb_mass_storage: Number of LUNs=1

[    2.003448] usb_bind_driver: usb_mass_storage

[    2.004425] usb_bind_driver: adb

[    2.004638] usb_function_register: ether

[    2.005096] mice: PS/2 mouse device common for all mice

[    2.006439] input: gpio-keys as /class/input/input0

[    2.060852] msm_ts: initing

[    2.062347] input: MSM touchscreen as /class/input/input1

[    2.121032] msm_ts: init successful

[    2.121398] msm_vkeyb: init

[    2.121643] msm_vkeyb: virtual keyboard is disabled by cmdline, not loading

[    2.122070] msm_blackstone_pad: init

[    2.123168] input: MSM Blackstone pad as /class/input/input2

[    2.123596] usb: reset

[    2.125671] usb: portchange USB_SPEED_HIGH

[    2.171386] usb: reset

[    2.185729] usb: portchange USB_SPEED_HIGH

[    2.200622] msm_blackstone_pad: loaded

[    2.215026] tssc_manager_init

[    2.229858] tp_init_module():

[    2.243988] TP_IOC_GETMFG=-2147188479

[    2.243988]

[    2.272613] misc_register(): OK

[    2.289459] RTC probe

[    2.305603] msm_rtc msm_rtc: rtc core: registered msm_rtc as rtc0

[    2.334106] MSM RTC started

[    2.349151] i2c /dev entries driver

[    2.364807] microp-ksc: Registering MicroP-KEY driver

[    2.379943] bma150: Registering Bosch BMA150 driver

[    2.395111] microp-klt: Registering MicroP-LED driver

[    2.409942] microp-klt: Initializing MicroP-LED chip driver at addr: 0x66

[    2.441131] Registered led device: klt::home

[    2.456542] Registered led device: klt::back

[    2.471588] Registered led device: klt::end

[    2.486511] Registered led device: klt::send

[    2.501220] Registered led device: klt::action

[    2.515869] Registered led device: lcd-backlight

[    2.530487] Registered led device: button-backlight

[    2.544708] microp-klt: Initialized MicroP-LED chip revision v060d

[    2.573120] kionix-kxsd9: Registering Kionix KXSD9 driver

[    2.587860] kionix-kxsd9: Initializing Kionix KXSD9 driver at addr: 0x19

[    2.617309] input: kionix-kxsd9 as /class/input/input3

[    2.662841] Bluetooth: HCI UART driver ver 2.2

[    2.669830] Bluetooth: HCI H4 protocol initialized

[    2.676757] Bluetooth: HCI BCSP protocol initialized

[    2.683593] Bluetooth: HCILL protocol initialized

[    2.691375] clock-wince: pc_clk_set_rate: id=19 rate=144000

[    2.705871] htc_pwrsink_set:STUB!

[    2.712890] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,0 dma 8

[    2.727020] mmc0: 4 bit data mode enabled

[    2.734375] mmc0: MMC clock 144000 -> 32000000 Hz, PCLK 64000000 Hz

[    2.748962] mmc0: Slot eject status = 1

[    2.756286] mmc0: Power save feature enable = 1

[    2.763610] mmc0: DM non-cached buffer at ffc0e000, dma_addr 0x24299000

[    2.778045] mmc0: DM cmd busaddr 0x24299000, cmdptr busaddr 0x24299300

[    2.793029] clock-wince: pc_clk_set_rate: id=21 rate=144000

[    2.808593] htc_pwrsink_set:STUB!

[    2.816070] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,87 dma 8

[    2.830566] mmc1: 4 bit data mode enabled

[    2.838012] mmc1: MMC clock 144000 -> 32000000 Hz, PCLK 64000000 Hz

[    2.852783] mmc1: Slot eject status = 0

[    2.860198] mmc1: Power save feature enable = 1

[    2.867553] mmc1: DM non-cached buffer at ffc0f000, dma_addr 0x2429a000

[    2.882232] mmc1: DM cmd busaddr 0x2429a000, cmdptr busaddr 0x2429a300

[    2.898834] TCP cubic registered

[    2.906738] NET: Registered protocol family 17

[    2.914520] Bluetooth: L2CAP ver 2.11

[    2.922088] Bluetooth: L2CAP socket layer initialized

[    2.929748] Bluetooth: SCO (Voice Link) ver 0.6

[    2.937408] Bluetooth: SCO socket layer initialized

[    2.947448] htc_pwrsink_set:STUB!

[    2.955383] Bluetooth: RFCOMM socket layer initialized

[    2.963226] Bluetooth: RFCOMM TTY layer initialized

[    2.970886] Bluetooth: RFCOMM ver 1.10

[    2.978393] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[    2.985992] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[    3.001068] clock_late_init() disabled 15 unused clocks

[    3.008758] GPS init

[    3.016845] GPS rfkill init

[    3.078552] HTC Battery Driver initialized

[    3.087402] Registering MicroP keypad driver

[    3.095916] msm_rtc msm_rtc: setting system clock to 2010-02-17 23:44:11 UTC (1266450251)

[    3.113616] htc_pwrsink_set:STUB!

[    3.123443] htc_pwrsink_set:STUB!

[    3.132415] Freeing init memory: 120K

[    3.141693] msm_i2c msm_i2c.0: error, status 43c8

[    3.149780] htc_pwrsink_set:STUB!

[    3.159454] htc_pwrsink_set:STUB!

[    3.169006] htc_pwrsink_set:STUB!

[    3.177551] msm_i2c msm_i2c.0: Error during data xfer (-5)

[    3.193511] htc_pwrsink_set:STUB!

[    3.202087] kionix-kxsd9: kxsd9_work: error -5

[    3.210601] mmc1: Command timeout

[    3.224182] mmc1: Command timeout

[    3.237640] mmc1: Command timeout

[    3.251098] mmc1: Command timeout

[    3.265502] htc_pwrsink_set:STUB!

[    3.272949] htc_pwrsink_set:STUB!

[    3.291473] htc_pwrsink_set:STUB!

[    3.323364] usb_mass_storage usb_mass_storage: config #1

[    3.339080] htc_pwrsink_set:STUB!

[    3.387329] htc_pwrsink_set:STUB!

[    3.394897] clock-wince: pc_clk_set_rate: id=21 rate=32000000

[    3.409515] htc_pwrsink_set:STUB!

[    3.424591] htc_pwrsink_set:STUB!

[    3.432189] mmc1: host does not support reading read-only switch. assuming write-enable.

[    3.454254] mmc1: new high speed SDHC card at address a93b

[    3.477478] mmcblk0: mmc1:a93b SU08G 7761920KiB

[    3.485778]  mmcblk0: p1

[   27.960815] usb_ether_open

[   47.500305] ramzswap: disk size set to 102400 kB

[   47.525939] Adding 102392k swap on /dev/block/ramzswap0.  Priority:-1 extents:1 across:102392k

[   47.674133] hsusb: ONLINE -> RESET

[   47.681365] hsusb: reset controller

[   47.749084] usb_ept_queue_xfer() tried to queue request while offline

[   47.763397] usb: notify offline

[   47.770629] hsusb: RESET -> ONLINE

[   47.777801] usb: suspend

[   47.792663] Something used micropklt_lcd_ctrl. This function should no longer be used.

[   47.944000] usb: reset

[   47.951812] usb: portchange USB_SPEED_HIGH

[   47.992858] usb: reset

[   47.995117] usb: portchange USB_SPEED_HIGH

[   48.103546] usb_mass_storage usb_mass_storage: config #1

[   48.451660] init: cannot open '/initlogo.rle'

[   48.633575] init: cannot find '/setupmodem.sh', disabling 'setupmodem'

[   49.315002] warning: `rild' uses 32-bit capabilities (legacy support in use)

[   51.617492] Turnin mic bias on 1

[   51.628082] snd_set_device 1 1 0

[   51.638427] [RPC] CALL to 30000002:0 @ 0:00000001 (60 bytes)

[   51.654022] [RPC] READ on ept d4292380

[   51.661987] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d4292380

[   51.680419] [RPC] READ on ept d4292380 (24 bytes)

[   51.691284] buggy program AudioCommandThr is calling snd_set_volume with dev=256 != 0xd

[   51.710937] +rpcservers_probe

[   51.720458] snd_set_volume 13 0 5

[   51.728698] [RPC] CALL to 30000002:0 @ 0:00000001 (60 bytes)

[   51.744323] [RPC] READ on ept d4292380

[   51.753021] [RR] x NEW_SERVER id=1:d4292320 prog=3000005d:0

[   51.769470] [RR] send control message cmd=4 srv.cmd=4 prog=3000005d:0 id=1:d4292320

[   51.788787] -rpc_server_register: 3000005d:00000000

[   51.798889] -rpc_server_register_all

[   51.807983] -rpcservers_probe

[   51.816223] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d4292380

[   51.832122] [RPC] READ on ept d4292380 (24 bytes)

[   68.377593] hw3d_open: pid 1224 tid 1227 opening client node

[   68.378967] remapping device 173

[   68.440826] hw3d_open: pid 1214 tid 1219 opening master node

[   87.680816] request_suspend_state: wakeup (3->0) at 86300000000 (2010-02-17 23:45:35.110000000 UTC)

[   87.693176] microp-klt: Setting lcd-backlight brightness to: 0x30

[   98.652435] Sound: 5

[   98.652648] Turnin mic bias on 0

[   98.652740] Turnin mic bias on 0

[   98.652832] snd_set_device 1 1 1

[   98.652862] [RPC] CALL to 30000002:0 @ 0:00000001 (60 bytes)

[   98.652923] [RPC] READ on ept d4292380

[   98.653594] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d4292380

[   98.653747] [RPC] READ on ept d4292380 (24 bytes)

[  110.720916] hw3d: current 1224 ppid 1 file c052e3c0 count 4

[  110.720977] hw3d: current 1224 ppid 1 file c052e3c0 count 3

[  110.721008] hw3d: current 1224 ppid 1 file c052e3c0 count 2

[  110.725555] hw3d: closing

[  110.725708] hw3d_release: in release for pid=1224 tid=1224

[  110.725738] hw3d: releasing 1224

[  110.725769] hw3d: had file

[  110.725799] hw3d: was enabled

[  127.562194] SMD: ch 7 OPENING -> OPENED

[  153.873291] microp-klt: Setting lcd-backlight brightness to: 0x20

[  153.894989] microp-klt: Setting lcd-backlight brightness to: 0x20

[  153.914886] microp-klt: Setting lcd-backlight brightness to: 0x20

[  153.934997] microp-klt: Setting lcd-backlight brightness to: 0x20

[  153.955169] microp-klt: Setting lcd-backlight brightness to: 0x20

[  153.975372] microp-klt: Setting lcd-backlight brightness to: 0x10

[  153.995452] microp-klt: Setting lcd-backlight brightness to: 0x10

[  154.015533] microp-klt: Setting lcd-backlight brightness to: 0x10

[  154.035614] microp-klt: Setting lcd-backlight brightness to: 0x10

[  154.055725] microp-klt: Setting lcd-backlight brightness to: 0x10

[  154.086456] microp-klt: Setting lcd-backlight brightness to: 0x00

[  154.106414] microp-klt: Setting lcd-backlight brightness to: 0x00

[  154.126586] microp-klt: Setting lcd-backlight brightness to: 0x00

[  154.146820] microp-klt: Setting lcd-backlight brightness to: 0x00

[  154.166992] microp-klt: Setting lcd-backlight brightness to: 0x00

[  154.188476] request_suspend_state: sleep (0->3) at 151950000000 (2010-02-17 23:46:40.760000000 UTC)

[  154.188720] Sending arm9_low_speed 2

[  154.188873] msmfb: panel sleeping

[  154.219909] epson_blank

[  154.220001] init epson blank

[  154.730926] blackstone panel deinit

[  154.802795] epson_suspend

[  158.437652] request_suspend_state: wakeup (3->0) at 156100000000 (2010-02-17 23:46:44.910000000 UTC)

[  158.439910] microp-klt: Setting lcd-backlight brightness to: 0x00

[  158.590698] microp-klt: Setting lcd-backlight brightness to: 0x00

[  158.624877] microp-klt: Setting lcd-backlight brightness to: 0x00

[  158.640258] microp-klt: Setting lcd-backlight brightness to: 0x00

[  158.661651] microp-klt: Setting lcd-backlight brightness to: 0x10

[  158.680603] microp-klt: Setting lcd-backlight brightness to: 0x10

[  158.700805] microp-klt: Setting lcd-backlight brightness to: 0x10

[  158.722076] microp-klt: Setting lcd-backlight brightness to: 0x10

[  158.741882] microp-klt: Setting lcd-backlight brightness to: 0x10

[  158.762420] microp-klt: Setting lcd-backlight brightness to: 0x20

[  158.782867] microp-klt: Setting lcd-backlight brightness to: 0x20

[  158.802947] microp-klt: Setting lcd-backlight brightness to: 0x20

[  158.832977] microp-klt: Setting lcd-backlight brightness to: 0x20

[  158.853027] microp-klt: Setting lcd-backlight brightness to: 0x20

[  158.873107] microp-klt: Setting lcd-backlight brightness to: 0x30

[  160.725616] epson_resume

[  160.725677] msmfb: panel waking

[  160.725708] msmfb: ready, waiting for full update

[  160.725708] hw3d_late_resume: resuming

[  160.725738] Sending arm9_low_speed 7

[  165.435729] microp-klt: Setting lcd-backlight brightness to: 0x20

[  165.456115] microp-klt: Setting lcd-backlight brightness to: 0x20

[  165.475891] microp-klt: Setting lcd-backlight brightness to: 0x20

[  165.495727] microp-klt: Setting lcd-backlight brightness to: 0x20

[  165.515899] microp-klt: Setting lcd-backlight brightness to: 0x20

[  165.536010] microp-klt: Setting lcd-backlight brightness to: 0x10

[  165.555969] microp-klt: Setting lcd-backlight brightness to: 0x10

[  165.576232] microp-klt: Setting lcd-backlight brightness to: 0x10

[  165.596405] microp-klt: Setting lcd-backlight brightness to: 0x10

[  165.616546] microp-klt: Setting lcd-backlight brightness to: 0x10

[  165.632629] msmfb: full update starting

[  165.636871] microp-klt: Setting lcd-backlight brightness to: 0x00

[  165.657287] microp-klt: Setting lcd-backlight brightness to: 0x00

[  165.677734] microp-klt: Setting lcd-backlight brightness to: 0x00

[  165.687469] fake vsync

[  165.687530] msmfb_start_dma 60.000 ms after vsync request

[  165.698242] microp-klt: Setting lcd-backlight brightness to: 0x00

[  165.718505] msmfb: full update completed

[  165.718597] msmfb: turning on panel

[  165.718658] epson_unblank

[  165.718658] init epson panel

[  165.718688] blackstone panel init

[  165.719268] microp-klt: Setting lcd-backlight brightness to: 0x00

[  165.741302] request_suspend_state: sleep (0->3) at 163290000000 (2010-02-17 23:46:52.100000000 UTC)

[  165.741424] Sending arm9_low_speed 2

[  165.830627] request_suspend_state: wakeup (3->0) at 163380000000 (2010-02-17 23:46:52.190000000 UTC)

[  165.997375] microp-klt: Setting lcd-backlight brightness to: 0x00

[  166.023223] microp-klt: Setting lcd-backlight brightness to: 0x00

[  166.041290] microp-klt: Setting lcd-backlight brightness to: 0x00

[  166.076049] microp-klt: Setting lcd-backlight brightness to: 0x00

[  166.102325] microp-klt: Setting lcd-backlight brightness to: 0x10

[  166.126007] microp-klt: Setting lcd-backlight brightness to: 0x10

[  166.142028] microp-klt: Setting lcd-backlight brightness to: 0x10

[  166.164093] microp-klt: Setting lcd-backlight brightness to: 0x10

[  166.182861] microp-klt: Setting lcd-backlight brightness to: 0x10

[  166.203338] microp-klt: Setting lcd-backlight brightness to: 0x20

[  166.223815] microp-klt: Setting lcd-backlight brightness to: 0x20

[  166.244354] microp-klt: Setting lcd-backlight brightness to: 0x20

[  166.264862] microp-klt: Setting lcd-backlight brightness to: 0x20

[  166.285888] microp-klt: Setting lcd-backlight brightness to: 0x20

[  166.305938] microp-klt: Setting lcd-backlight brightness to: 0x30

[  167.966430] msmfb: panel awake

[  167.970886] msmfb: panel sleeping

[  168.032775] epson_blank

[  168.032836] init epson blank

[  168.442626] blackstone panel deinit

[  168.503204] epson_suspend

[  168.503753] epson_resume

[  168.503814] msmfb: panel waking

[  168.503845] msmfb: ready, waiting for full update

[  168.503875] hw3d_late_resume: resuming

[  168.503906] Sending arm9_low_speed 7

[  168.520324] msmfb: full update starting

[  168.572143] fake vsync

[  168.572265] msmfb_start_dma 60.000 ms after vsync request

[  168.603637] msmfb: full update completed

[  168.603790] msmfb: turning on panel

[  168.603820] epson_unblank

[  168.603820] init epson panel

[  168.603851] blackstone panel init

[  170.741943] msmfb: panel awake

[  176.795898] microp-klt: Setting lcd-backlight brightness to: 0x20

[  176.807861] microp-klt: Setting lcd-backlight brightness to: 0x20

[  176.837921] microp-klt: Setting lcd-backlight brightness to: 0x20

[  176.858001] microp-klt: Setting lcd-backlight brightness to: 0x20

[  176.878082] microp-klt: Setting lcd-backlight brightness to: 0x20

[  176.898223] microp-klt: Setting lcd-backlight brightness to: 0x10

[  176.918365] microp-klt: Setting lcd-backlight brightness to: 0x10

[  176.938507] microp-klt: Setting lcd-backlight brightness to: 0x10

[  176.958648] microp-klt: Setting lcd-backlight brightness to: 0x10

[  176.978912] microp-klt: Setting lcd-backlight brightness to: 0x10

[  176.998931] microp-klt: Setting lcd-backlight brightness to: 0x00

[  177.018920] microp-klt: Setting lcd-backlight brightness to: 0x00

[  177.039031] microp-klt: Setting lcd-backlight brightness to: 0x00

[  177.059143] microp-klt: Setting lcd-backlight brightness to: 0x00

[  177.079223] microp-klt: Setting lcd-backlight brightness to: 0x00

[  177.100585] request_suspend_state: sleep (0->3) at 174490000000 (2010-02-17 23:47:03.300000000 UTC)

[  177.100799] Sending arm9_low_speed 2

[  177.100982] msmfb: panel sleeping

[  177.132019] epson_blank

[  177.132110] init epson blank

[  177.452087] blackstone panel deinit

[  177.514129] epson_suspend

[  177.514465] active wake lock PowerManagerService

[  177.514495] active wake lock vbus_present

[  177.514526] wake lock mmc_delayed_work, expired

[  177.514556] wake lock SMD_DATA1, expired

[  177.514556] active wake lock SMD_DS, time left 30

[  180.186584] request_suspend_state: wakeup (3->0) at 177550000000 (2010-02-17 23:47:06.360000000 UTC)

[  180.189880] epson_resume

[  180.189971] msmfb: panel waking

[  180.190032] msmfb: ready, waiting for full update

[  180.190124] hw3d_late_resume: resuming

[  180.190185] Sending arm9_low_speed 7

[  180.191314] microp-klt: Setting lcd-backlight brightness to: 0x00

[  180.423034] microp-klt: Setting lcd-backlight brightness to: 0x00

[  180.453857] microp-klt: Setting lcd-backlight brightness to: 0x00

[  180.457427] msmfb: full update starting

[  180.472564] microp-klt: Setting lcd-backlight brightness to: 0x00

[  180.499816] microp-klt: Setting lcd-backlight brightness to: 0x10

[  180.512695] fake vsync

[  180.512725] msmfb_start_dma 60.000 ms after vsync request

[  180.513366] microp-klt: Setting lcd-backlight brightness to: 0x10

[  180.533660] microp-klt: Setting lcd-backlight brightness to: 0x10

[  180.543548] msmfb: full update completed

[  180.543640] msmfb: turning on panel

[  180.543670] epson_unblank

[  180.543701] init epson panel

[  180.543701] blackstone panel init

[  180.554199] microp-klt: Setting lcd-backlight brightness to: 0x10

[  180.574615] microp-klt: Setting lcd-backlight brightness to: 0x10

[  180.595092] microp-klt: Setting lcd-backlight brightness to: 0x20

[  180.615570] microp-klt: Setting lcd-backlight brightness to: 0x20

[  180.636077] microp-klt: Setting lcd-backlight brightness to: 0x20

[  180.656555] microp-klt: Setting lcd-backlight brightness to: 0x20

[  180.677490] microp-klt: Setting lcd-backlight brightness to: 0x20

[  180.698547] microp-klt: Setting lcd-backlight brightness to: 0x30

[  182.646911] msmfb: panel awake

[  185.437255] microp-klt: Setting lcd-backlight brightness to: 0x20

[  185.450561] microp-klt: Setting lcd-backlight brightness to: 0x20

[  185.470550] microp-klt: Setting lcd-backlight brightness to: 0x20

[  185.490661] microp-klt: Setting lcd-backlight brightness to: 0x20

[  185.510864] microp-klt: Setting lcd-backlight brightness to: 0x20

[  185.531097] microp-klt: Setting lcd-backlight brightness to: 0x10

[  185.551513] microp-klt: Setting lcd-backlight brightness to: 0x10

[  185.617736] microp-klt: Setting lcd-backlight brightness to: 0x10

[  185.637847] microp-klt: Setting lcd-backlight brightness to: 0x10

[  185.658111] microp-klt: Setting lcd-backlight brightness to: 0x10

[  185.678192] microp-klt: Setting lcd-backlight brightness to: 0x00

[  185.708496] microp-klt: Setting lcd-backlight brightness to: 0x00

[  185.729003] microp-klt: Setting lcd-backlight brightness to: 0x00

[  185.749420] microp-klt: Setting lcd-backlight brightness to: 0x00

[  185.769958] microp-klt: Setting lcd-backlight brightness to: 0x00

[  185.791992] request_suspend_state: sleep (0->3) at 183070000000 (2010-02-17 23:47:11.880000000 UTC)

[  185.793670] Sending arm9_low_speed 2

[  185.793792] msmfb: panel sleeping

[  185.824890] epson_blank

[  185.824951] init epson blank

[  186.156829] blackstone panel deinit

[  186.218872] epson_suspend

[  186.219207] active wake lock PowerManagerService

[  186.219238] active wake lock vbus_present

[  186.219268] wake lock mmc_delayed_work, expired

[  186.219299] wake lock SMD_DATA1, expired

[  186.219299] active wake lock SMD_DS, time left 24

[  186.980041] usb: suspend

[  189.603912] request_suspend_state: wakeup (3->0) at 186860000000 (2010-02-17 23:47:15.670000000 UTC)

[  189.604187] epson_resume

[  189.604248] msmfb: panel waking

[  189.604309] msmfb: ready, waiting for full update

[  189.604400] hw3d_late_resume: resuming

[  189.604461] Sending arm9_low_speed 7

[  189.608459] microp-klt: Setting lcd-backlight brightness to: 0x00

[  189.793243] microp-klt: Setting lcd-backlight brightness to: 0x00

[  189.828155] microp-klt: Setting lcd-backlight brightness to: 0x00

[  189.838287] msmfb: full update starting

[  189.847351] microp-klt: Setting lcd-backlight brightness to: 0x00

[  189.866302] microp-klt: Setting lcd-backlight brightness to: 0x10

[  189.886657] microp-klt: Setting lcd-backlight brightness to: 0x10

[  189.896575] fake vsync

[  189.896697] msmfb_start_dma 60.000 ms after vsync request

[  189.908020] microp-klt: Setting lcd-backlight brightness to: 0x10

[  189.927551] msmfb: full update completed

[  189.927978] microp-klt: Setting lcd-backlight brightness to: 0x10

[  189.928100] msmfb: turning on panel

[  189.928131] epson_unblank

[  189.928161] init epson panel

[  189.928161] blackstone panel init

[  189.948303] microp-klt: Setting lcd-backlight brightness to: 0x10

[  189.968750] microp-klt: Setting lcd-backlight brightness to: 0x20

[  189.989288] microp-klt: Setting lcd-backlight brightness to: 0x20

[  190.009796] microp-klt: Setting lcd-backlight brightness to: 0x20

[  190.030181] microp-klt: Setting lcd-backlight brightness to: 0x20

[  190.050628] microp-klt: Setting lcd-backlight brightness to: 0x20

[  190.081237] microp-klt: Setting lcd-backlight brightness to: 0x30

[  192.034271] msmfb: panel awake

[  194.649627] microp-klt: Setting lcd-backlight brightness to: 0x20

[  194.666687] microp-klt: Setting lcd-backlight brightness to: 0x20

[  194.686737] microp-klt: Setting lcd-backlight brightness to: 0x20

[  194.707794] microp-klt: Setting lcd-backlight brightness to: 0x20

[  194.727081] microp-klt: Setting lcd-backlight brightness to: 0x20

[  194.747100] microp-klt: Setting lcd-backlight brightness to: 0x10

[  194.767517] microp-klt: Setting lcd-backlight brightness to: 0x10

[  194.787322] microp-klt: Setting lcd-backlight brightness to: 0x10

[  194.807403] microp-klt: Setting lcd-backlight brightness to: 0x10

[  194.827575] microp-klt: Setting lcd-backlight brightness to: 0x10

[  194.856475] microp-klt: Setting lcd-backlight brightness to: 0x00

[  194.898406] microp-klt: Setting lcd-backlight brightness to: 0x00

[  194.918670] microp-klt: Setting lcd-backlight brightness to: 0x00

[  194.938842] microp-klt: Setting lcd-backlight brightness to: 0x00

[  194.959075] microp-klt: Setting lcd-backlight brightness to: 0x00

[  194.980194] request_suspend_state: sleep (0->3) at 192200000000 (2010-02-17 23:47:21.010000000 UTC)

[  194.982086] Sending arm9_low_speed 2

[  194.982238] msmfb: panel sleeping

[  195.038726] epson_blank

[  195.038787] init epson blank

[  195.139465] request_suspend_state: wakeup (3->0) at 192360000000 (2010-02-17 23:47:21.170000000 UTC)

[  195.141174] microp-klt: Setting lcd-backlight brightness to: 0x00

[  195.293579] microp-klt: Setting lcd-backlight brightness to: 0x00

[  195.318603] microp-klt: Setting lcd-backlight brightness to: 0x00

[  195.351959] microp-klt: Setting lcd-backlight brightness to: 0x00

[  195.374938] microp-klt: Setting lcd-backlight brightness to: 0x10

[  195.391723] microp-klt: Setting lcd-backlight brightness to: 0x10

[  195.411682] microp-klt: Setting lcd-backlight brightness to: 0x10

[  195.413055] blackstone panel deinit

[  195.454833] microp-klt: Setting lcd-backlight brightness to: 0x10

[  195.475006] epson_suspend

[  195.475646] epson_resume

[  195.475708] msmfb: panel waking

[  195.475738] msmfb: ready, waiting for full update

[  195.475769] hw3d_late_resume: resuming

[  195.475799] Sending arm9_low_speed 7

[  195.481140] msmfb: full update starting

[  195.484375] microp-klt: Setting lcd-backlight brightness to: 0x10

[  195.504913] microp-klt: Setting lcd-backlight brightness to: 0x20

[  195.523773] microp-klt: Setting lcd-backlight brightness to: 0x20

[  195.533508] fake vsync

[  195.533538] msmfb_start_dma 60.000 ms after vsync request

[  195.544250] microp-klt: Setting lcd-backlight brightness to: 0x20

[  195.564392] msmfb: full update completed

[  195.564514] msmfb: turning on panel

[  195.564544] epson_unblank

[  195.564575] init epson panel

[  195.564605] blackstone panel init

[  195.565032] microp-klt: Setting lcd-backlight brightness to: 0x20

[  195.585174] microp-klt: Setting lcd-backlight brightness to: 0x20

[  195.605651] microp-klt: Setting lcd-backlight brightness to: 0x30

[  195.737152] hsusb: ONLINE -> OFFLINE

[  195.737396] usb_ept_queue_xfer() tried to queue request while offline

[  197.781890] msmfb: panel awake

[  241.065856] microp-klt: Setting lcd-backlight brightness to: 0x20

[  241.078643] microp-klt: Setting lcd-backlight brightness to: 0x20

[  241.098724] microp-klt: Setting lcd-backlight brightness to: 0x20

[  241.118743] microp-klt: Setting lcd-backlight brightness to: 0x20

[  241.139007] microp-klt: Setting lcd-backlight brightness to: 0x20

[  241.159118] microp-klt: Setting lcd-backlight brightness to: 0x10

[  241.179687] microp-klt: Setting lcd-backlight brightness to: 0x10

[  241.200103] microp-klt: Setting lcd-backlight brightness to: 0x10

[  241.220550] microp-klt: Setting lcd-backlight brightness to: 0x10

[  241.241027] microp-klt: Setting lcd-backlight brightness to: 0x10

[  241.261505] microp-klt: Setting lcd-backlight brightness to: 0x00

[  241.282012] microp-klt: Setting lcd-backlight brightness to: 0x00

[  241.302490] microp-klt: Setting lcd-backlight brightness to: 0x00

[  241.322967] microp-klt: Setting lcd-backlight brightness to: 0x00

[  241.344116] microp-klt: Setting lcd-backlight brightness to: 0x00

[  241.365081] request_suspend_state: sleep (0->3) at 238060000000 (2010-02-17 23:48:06.870000000 UTC)

[  241.365325] Sending arm9_low_speed 2

[  241.365478] msmfb: panel sleeping

[  241.396514] epson_blank

[  241.396606] init epson blank

[  241.707000] blackstone panel deinit

[  241.768768] epson_suspend

[  241.769134] active wake lock PowerManagerService

[  241.769165] wake lock mmc_delayed_work, expired

[  241.769195] wake lock SMD_DATA1, expired

[  241.769226] wake lock vbus_present, expired

[  241.769226] active wake lock SMD_DS, time left 40

[  242.170288] wake lock SMD_DS, expired

[  242.170684] suspend: enter suspend(2010-02-17 23:48:07.670000000 UTC)

[  242.170745] PM: Syncing filesystems ... done.

[  242.170959] PM: Preparing system for mem sleep

[  242.210876] Freezing user space processes ... (elapsed 0.01 seconds) done.

[  242.217681] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.

[  242.231811] PM: Entering mem sleep

[  242.231933] Suspending console(s) (use no_console_suspend to debug)

[  242.235687] htc_pwrsink_set:STUB!

[  242.236022] Wake up in 65 seconds

[  242.236389] power_suspend_late return 0

[  242.239105] clock-wince: pc_clk_set_rate: id=21 rate=144000

[  242.239135] htc_pwrsink_set:STUB!

[  242.241210] htc_pwrsink_set:STUB!

[  242.243804] htc_pwrsink_set:STUB!

[  242.272033] htc_pwrsink_set:STUB!

[  242.280151] htc_pwrsink_set:STUB!

[  242.280212] clock-wince: pc_clk_set_rate: id=21 rate=32000000

[  242.280212] htc_pwrsink_set:STUB!

[  242.280273] htc_pwrsink_set:STUB!

[  242.281799] hw3d_resume: resuming

[  242.284790] PM: Finishing wakeup.

[  242.284912] Restarting tasks ... <6>request_suspend_state: wakeup (3->0) at 238990000000 (2010-02-17 23:48:10.750000000 UTC)

[  242.300476] microp-klt: Setting lcd-backlight brightness to: 0x00

[  242.301574] done.

[  242.302185] suspend: exit suspend, ret = 0 (2010-02-17 23:48:10.750000000 UTC)

[  242.302246] epson_resume

[  242.302246] msmfb: panel waking

[  242.302276] msmfb: ready, waiting for full update

[  242.302307] hw3d_late_resume: resuming

[  242.302337] Sending arm9_low_speed 7

[  242.390014] msmfb: full update starting

[  242.400329] microp-klt: Setting lcd-backlight brightness to: 0x00

[  242.430664] microp-klt: Setting lcd-backlight brightness to: 0x00

[  242.449249] fake vsync

[  242.449279] msmfb_start_dma 60.000 ms after vsync request

[  242.450073] microp-klt: Setting lcd-backlight brightness to: 0x00

[  242.470092] microp-klt: Setting lcd-backlight brightness to: 0x10

[  242.480102] msmfb: full update completed

[  242.480316] msmfb: turning on panel

[  242.480346] epson_unblank

[  242.480346] init epson panel

[  242.480377] blackstone panel init

[  242.490386] microp-klt: Setting lcd-backlight brightness to: 0x10

[  242.514892] microp-klt: Setting lcd-backlight brightness to: 0x10

[  242.531219] microp-klt: Setting lcd-backlight brightness to: 0x10

[  242.551727] microp-klt: Setting lcd-backlight brightness to: 0x10

[  242.572082] microp-klt: Setting lcd-backlight brightness to: 0x20

[  242.592590] microp-klt: Setting lcd-backlight brightness to: 0x20

[  242.613037] microp-klt: Setting lcd-backlight brightness to: 0x20

[  242.633300] microp-klt: Setting lcd-backlight brightness to: 0x20

[  242.663909] microp-klt: Setting lcd-backlight brightness to: 0x20

[  242.683685] microp-klt: Setting lcd-backlight brightness to: 0x30

[  244.596618] msmfb: panel awake

[  245.039916] microp-klt: Setting lcd-backlight brightness to: 0x20

[  245.059753] microp-klt: Setting lcd-backlight brightness to: 0x20

[  245.079742] microp-klt: Setting lcd-backlight brightness to: 0x20

[  245.099822] microp-klt: Setting lcd-backlight brightness to: 0x20

[  245.119964] microp-klt: Setting lcd-backlight brightness to: 0x20

[  245.140197] microp-klt: Setting lcd-backlight brightness to: 0x10

[  245.160247] microp-klt: Setting lcd-backlight brightness to: 0x10

[  245.180206] microp-klt: Setting lcd-backlight brightness to: 0x10

[  245.200622] microp-klt: Setting lcd-backlight brightness to: 0x10

[  245.221282] microp-klt: Setting lcd-backlight brightness to: 0x10

[  245.241851] microp-klt: Setting lcd-backlight brightness to: 0x00

[  245.262268] microp-klt: Setting lcd-backlight brightness to: 0x00

[  245.282745] microp-klt: Setting lcd-backlight brightness to: 0x00

[  245.303192] microp-klt: Setting lcd-backlight brightness to: 0x00

[  245.323699] microp-klt: Setting lcd-backlight brightness to: 0x00

[  245.348693] request_suspend_state: sleep (0->3) at 242010000000 (2010-02-17 23:48:13.770000000 UTC)

[  245.348815] Sending arm9_low_speed 2

[  245.348907] msmfb: panel sleeping

[  245.355163] request_suspend_state: wakeup (3->0) at 242020000000 (2010-02-17 23:48:13.780000000 UTC)

[  245.384796] epson_blank

[  245.384887] init epson blank

[  245.506805] microp-klt: Setting lcd-backlight brightness to: 0x00

[  245.526672] microp-klt: Setting lcd-backlight brightness to: 0x00

[  245.546295] microp-klt: Setting lcd-backlight brightness to: 0x00

[  245.566436] microp-klt: Setting lcd-backlight brightness to: 0x00

[  245.644195] microp-klt: Setting lcd-backlight brightness to: 0x10

[  245.688018] microp-klt: Setting lcd-backlight brightness to: 0x10

[  245.720275] microp-klt: Setting lcd-backlight brightness to: 0x10

[  245.739257] microp-klt: Setting lcd-backlight brightness to: 0x10

[  245.758972] microp-klt: Setting lcd-backlight brightness to: 0x10

[  245.759155] blackstone panel deinit

[  245.781433] microp-klt: Setting lcd-backlight brightness to: 0x20

[  245.798767] microp-klt: Setting lcd-backlight brightness to: 0x20

[  245.820678] epson_suspend

[  245.821350] microp-klt: Setting lcd-backlight brightness to: 0x20

[  245.821685] epson_resume

[  245.821777] msmfb: panel waking

[  245.821777] msmfb: ready, waiting for full update

[  245.821807] hw3d_late_resume: resuming

[  245.821838] Sending arm9_low_speed 7

[  245.839630] microp-klt: Setting lcd-backlight brightness to: 0x20

[  245.860046] microp-klt: Setting lcd-backlight brightness to: 0x20

[  245.880554] microp-klt: Setting lcd-backlight brightness to: 0x30

[  246.496215] msmfb: full update starting

[  246.556365] fake vsync

[  246.556427] msmfb_start_dma 60.000 ms after vsync request

[  246.587677] msmfb: full update completed

[  246.587799] msmfb: turning on panel

[  246.587829] epson_unblank

[  246.587829] init epson panel

[  246.587860] blackstone panel init

[  248.745269] msmfb: panel awake

[  251.827301] microp-klt: Setting lcd-backlight brightness to: 0x20

[  251.844299] microp-klt: Setting lcd-backlight brightness to: 0x20

[  251.864013] microp-klt: Setting lcd-backlight brightness to: 0x20

[  251.884887] microp-klt: Setting lcd-backlight brightness to: 0x20

[  251.904449] microp-klt: Setting lcd-backlight brightness to: 0x20

[  251.924438] microp-klt: Setting lcd-backlight brightness to: 0x10

[  251.944610] microp-klt: Setting lcd-backlight brightness to: 0x10

[  251.965240] microp-klt: Setting lcd-backlight brightness to: 0x10

[  251.985656] microp-klt: Setting lcd-backlight brightness to: 0x10

[  252.013610] microp-klt: Setting lcd-backlight brightness to: 0x10

[  252.027832] microp-klt: Setting lcd-backlight brightness to: 0x00

[  252.048248] microp-klt: Setting lcd-backlight brightness to: 0x00

[  252.067962] microp-klt: Setting lcd-backlight brightness to: 0x00

[  252.088439] microp-klt: Setting lcd-backlight brightness to: 0x00

[  252.108886] microp-klt: Setting lcd-backlight brightness to: 0x00

[  252.130279] request_suspend_state: sleep (0->3) at 248650000000 (2010-02-17 23:48:20.410000000 UTC)

[  252.130432] Sending arm9_low_speed 2

[  252.130554] msmfb: panel sleeping

[  252.139251] request_suspend_state: wakeup (3->0) at 248660000000 (2010-02-17 23:48:20.420000000 UTC)

[  252.169219] epson_blank

[  252.169311] init epson blank

[  252.492248] blackstone panel deinit

[  252.554077] epson_suspend

[  252.554412] epson_resume

[  252.554443] msmfb: panel waking

[  252.554473] msmfb: ready, waiting for full update

[  252.554473] hw3d_late_resume: resuming

[  252.554504] Sending arm9_low_speed 7

[  252.997344] msmfb: full update starting

[  253.009643] microp-klt: Setting lcd-backlight brightness to: 0x00

[  253.055267] microp-klt: Setting lcd-backlight brightness to: 0x00

[  253.055511] fake vsync

[  253.055541] msmfb_start_dma 60.000 ms after vsync request

[  253.078247] microp-klt: Setting lcd-backlight brightness to: 0x00

[  253.086364] msmfb: full update completed

[  253.086700] msmfb: turning on panel

[  253.086730] epson_unblank

[  253.086730] init epson panel

[  253.086761] blackstone panel init

[  253.096496] microp-klt: Setting lcd-backlight brightness to: 0x00

[  253.116638] microp-klt: Setting lcd-backlight brightness to: 0x10

[  253.136810] microp-klt: Setting lcd-backlight brightness to: 0x10

[  253.159118] microp-klt: Setting lcd-backlight brightness to: 0x10

[  253.177612] microp-klt: Setting lcd-backlight brightness to: 0x10

[  253.197998] microp-klt: Setting lcd-backlight brightness to: 0x10

[  253.221221] microp-klt: Setting lcd-backlight brightness to: 0x20

[  253.258697] microp-klt: Setting lcd-backlight brightness to: 0x20

[  253.278656] microp-klt: Setting lcd-backlight brightness to: 0x20

[  253.302001] microp-klt: Setting lcd-backlight brightness to: 0x20

[  253.319580] microp-klt: Setting lcd-backlight brightness to: 0x20

[  253.340087] microp-klt: Setting lcd-backlight brightness to: 0x30

[  253.685058] microp-klt: Setting lcd-backlight brightness to: 0x20

[  253.705780] microp-klt: Setting lcd-backlight brightness to: 0x20

[  253.725830] microp-klt: Setting lcd-backlight brightness to: 0x20

[  253.745910] microp-klt: Setting lcd-backlight brightness to: 0x20

[  253.766021] microp-klt: Setting lcd-backlight brightness to: 0x20

[  253.786132] microp-klt: Setting lcd-backlight brightness to: 0x10

[  253.806213] microp-klt: Setting lcd-backlight brightness to: 0x10

[  253.826354] microp-klt: Setting lcd-backlight brightness to: 0x10

[  253.846405] microp-klt: Setting lcd-backlight brightness to: 0x10

[  253.866516] microp-klt: Setting lcd-backlight brightness to: 0x10

[  253.886627] microp-klt: Setting lcd-backlight brightness to: 0x00

[  253.906768] microp-klt: Setting lcd-backlight brightness to: 0x00

[  253.926910] microp-klt: Setting lcd-backlight brightness to: 0x00

[  253.946990] microp-klt: Setting lcd-backlight brightness to: 0x00

[  253.967132] microp-klt: Setting lcd-backlight brightness to: 0x00

[  253.988403] request_suspend_state: sleep (0->3) at 250490000000 (2010-02-17 23:48:22.250000000 UTC)

[  253.988616] Sending arm9_low_speed 2

[  255.227325] msmfb: panel awake

[  255.247772] msmfb: panel sleeping

[  255.295867] epson_blank

[  255.295928] init epson blank

[  255.481414] request_suspend_state: wakeup (3->0) at 251970000000 (2010-02-17 23:48:23.730000000 UTC)

[  255.485351] microp-klt: Setting lcd-backlight brightness to: 0x00

[  255.535949] microp-klt: Setting lcd-backlight brightness to: 0x00

[  255.592102] microp-klt: Setting lcd-backlight brightness to: 0x00

[  255.619750] microp-klt: Setting lcd-backlight brightness to: 0x00

[  255.642089] microp-klt: Setting lcd-backlight brightness to: 0x10

[  255.643615] blackstone panel deinit

[  255.661712] microp-klt: Setting lcd-backlight brightness to: 0x10

[  255.682159] microp-klt: Setting lcd-backlight brightness to: 0x10

[  255.704193] epson_suspend

[  255.704803] microp-klt: Setting lcd-backlight brightness to: 0x10

[  255.705169] epson_resume

[  255.705230] msmfb: panel waking

[  255.705261] msmfb: ready, waiting for full update

[  255.705291] hw3d_late_resume: resuming

[  255.705291] Sending arm9_low_speed 7

[  255.723114] microp-klt: Setting lcd-backlight brightness to: 0x10

[  255.743652] microp-klt: Setting lcd-backlight brightness to: 0x20

[  255.764160] microp-klt: Setting lcd-backlight brightness to: 0x20

[  255.784637] microp-klt: Setting lcd-backlight brightness to: 0x20

[  255.805206] microp-klt: Setting lcd-backlight brightness to: 0x20

[  255.825683] microp-klt: Setting lcd-backlight brightness to: 0x20

[  255.846160] microp-klt: Setting lcd-backlight brightness to: 0x30

[  258.035888] microp-klt: Setting lcd-backlight brightness to: 0x20

[  258.047973] microp-klt: Setting lcd-backlight brightness to: 0x20

[  258.067993] microp-klt: Setting lcd-backlight brightness to: 0x20

[  258.088073] microp-klt: Setting lcd-backlight brightness to: 0x20

[  258.108215] microp-klt: Setting lcd-backlight brightness to: 0x20

[  258.128356] microp-klt: Setting lcd-backlight brightness to: 0x10

[  258.148468] microp-klt: Setting lcd-backlight brightness to: 0x10

[  258.168548] microp-klt: Setting lcd-backlight brightness to: 0x10

[  258.188690] microp-klt: Setting lcd-backlight brightness to: 0x10

[  258.208770] microp-klt: Setting lcd-backlight brightness to: 0x10

[  258.229003] microp-klt: Setting lcd-backlight brightness to: 0x00

[  258.249053] microp-klt: Setting lcd-backlight brightness to: 0x00

[  258.269165] microp-klt: Setting lcd-backlight brightness to: 0x00

[  258.289245] microp-klt: Setting lcd-backlight brightness to: 0x00

[  258.309387] microp-klt: Setting lcd-backlight brightness to: 0x00

[  258.330627] request_suspend_state: sleep (0->3) at 254750000000 (2010-02-17 23:48:26.510000000 UTC)

[  258.330871] Sending arm9_low_speed 2

[  258.331024] msmfb: panel sleeping

[  258.362030] epson_blank

[  258.362152] init epson blank

[  258.633544] blackstone panel deinit

[  258.695983] epson_suspend

[  258.696289] active wake lock SMD_DS, time left 35

[  259.047698] wake lock SMD_DS, expired

[  259.048522] suspend: enter suspend(2010-02-17 23:48:27.220000000 UTC)

[  259.048645] PM: Syncing filesystems ... done.

[  259.049285] PM: Preparing system for mem sleep

[  259.127380] Freezing user space processes ... (elapsed 0.02 seconds) done.

[  259.142364] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.

[  259.144073] PM: Entering mem sleep

[  259.144500] Suspending console(s) (use no_console_suspend to debug)

[  259.152038] htc_pwrsink_set:STUB!

[  259.152496] Wake up in 45 seconds

[  259.153045] power_suspend_late return 0

[  259.156219] clock-wince: pc_clk_set_rate: id=21 rate=144000

[  259.156280] htc_pwrsink_set:STUB!

[  259.158447] htc_pwrsink_set:STUB!

[  259.161163] htc_pwrsink_set:STUB!

[  259.187500] htc_pwrsink_set:STUB!

[  259.195404] htc_pwrsink_set:STUB!

[  259.195526] clock-wince: pc_clk_set_rate: id=21 rate=32000000

[  259.195587] htc_pwrsink_set:STUB!

[  259.195709] htc_pwrsink_set:STUB!

[  259.197662] hw3d_resume: resuming

[  259.207519] PM: Finishing wakeup.

[  259.208038] Restarting tasks ... done.

[  259.238128] suspend: exit suspend, ret = 0 (2010-02-17 23:48:27.410000000 UTC)

[  259.616516] request_suspend_state: wakeup (3->0) at 256020000000 (2010-02-17 23:48:27.780000000 UTC)

[  259.620056] microp-klt: Setting lcd-backlight brightness to: 0x00

[  259.633453] epson_resume

[  259.633575] msmfb: panel waking

[  259.633636] msmfb: ready, waiting for full update

[  259.633728] hw3d_late_resume: resuming

[  259.633789] Sending arm9_low_speed 7

[  259.833923] microp-klt: Setting lcd-backlight brightness to: 0x00

[  259.855682] microp-klt: Setting lcd-backlight brightness to: 0x00

[  259.874511] msmfb: full update starting

[  259.876922] microp-klt: Setting lcd-backlight brightness to: 0x00

[  259.897003] microp-klt: Setting lcd-backlight brightness to: 0x10

[  259.916687] microp-klt: Setting lcd-backlight brightness to: 0x10

[  259.926391] fake vsync

[  259.926422] msmfb_start_dma 60.000 ms after vsync request

[  259.937103] microp-klt: Setting lcd-backlight brightness to: 0x10

[  259.957244] msmfb: full update completed

[  259.957672] microp-klt: Setting lcd-backlight brightness to: 0x10

[  259.957763] msmfb: turning on panel

[  259.957824] epson_unblank

[  259.957824] init epson panel

[  259.957824] blackstone panel init

[  259.978027] microp-klt: Setting lcd-backlight brightness to: 0x10

[  259.998474] microp-klt: Setting lcd-backlight brightness to: 0x20

[  260.019012] microp-klt: Setting lcd-backlight brightness to: 0x20

[  260.039642] microp-klt: Setting lcd-backlight brightness to: 0x20

[  260.059936] microp-klt: Setting lcd-backlight brightness to: 0x20

[  260.080322] microp-klt: Setting lcd-backlight brightness to: 0x20

[  260.110900] microp-klt: Setting lcd-backlight brightness to: 0x30

[  262.064758] msmfb: panel awake

[  286.466766] microp-klt: Setting lcd-backlight brightness to: 0x20

[  286.479614] microp-klt: Setting lcd-backlight brightness to: 0x20

[  286.499664] microp-klt: Setting lcd-backlight brightness to: 0x20

[  286.519714] microp-klt: Setting lcd-backlight brightness to: 0x20

[  286.539825] microp-klt: Setting lcd-backlight brightness to: 0x20

[  286.559997] microp-klt: Setting lcd-backlight brightness to: 0x10

[  286.580108] microp-klt: Setting lcd-backlight brightness to: 0x10

[  286.600219] microp-klt: Setting lcd-backlight brightness to: 0x10

[  286.620361] microp-klt: Setting lcd-backlight brightness to: 0x10

[  286.640594] microp-klt: Setting lcd-backlight brightness to: 0x10

[  286.660644] microp-klt: Setting lcd-backlight brightness to: 0x00

[  286.680786] microp-klt: Setting lcd-backlight brightness to: 0x00

[  286.700866] microp-klt: Setting lcd-backlight brightness to: 0x00

[  286.720947] microp-klt: Setting lcd-backlight brightness to: 0x00

[  286.741058] microp-klt: Setting lcd-backlight brightness to: 0x00

[  286.762359] request_suspend_state: sleep (0->3) at 282910000000 (2010-02-17 23:48:54.670000000 UTC)

[  286.762603] Sending arm9_low_speed 2

[  286.762756] msmfb: panel sleeping

[  286.800964] epson_blank

[  286.801055] init epson blank

[  287.193664] blackstone panel deinit

[  287.255706] epson_suspend

[  287.256042] active wake lock PowerManagerService

[  287.256072] wake lock mmc_delayed_work, expired

[  287.256103] active wake lock SMD_DS, time left 36

[  287.256134] active wake lock vbus_present, time left 40

[  287.656555] wake lock SMD_DS, expired

[  287.656616] wake lock vbus_present, expired

[  287.657012] suspend: enter suspend(2010-02-17 23:48:55.480000000 UTC)

[  287.657073] PM: Syncing filesystems ... done.

[  287.657287] PM: Preparing system for mem sleep

[  287.697021] Freezing user space processes ... (elapsed 0.00 seconds) done.

[  287.703826] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.

[  287.704559] PM: Entering mem sleep

[  287.704681] Suspending console(s) (use no_console_suspend to debug)

[  287.708496] htc_pwrsink_set:STUB!

[  287.708831] Wake up in 17 seconds

[  287.709197] power_suspend_late return 0

[  287.709564] msm_rtc: Generating alarm event (src 2)

[  287.711730] clock-wince: pc_clk_set_rate: id=21 rate=144000

[  287.711730] htc_pwrsink_set:STUB!

[  287.713806] htc_pwrsink_set:STUB!

[  287.716369] htc_pwrsink_set:STUB!

[  287.744628] htc_pwrsink_set:STUB!

[  287.752777] htc_pwrsink_set:STUB!

[  287.752807] clock-wince: pc_clk_set_rate: id=21 rate=32000000

[  287.752838] htc_pwrsink_set:STUB!

[  287.752899] htc_pwrsink_set:STUB!

[  287.754394] hw3d_resume: resuming

[  287.757537] PM: Finishing wakeup.

[  287.757659] Restarting tasks ... done.

[  287.882171] suspend: exit suspend, ret = 0 (2010-02-17 23:49:12.860000000 UTC)

[  288.450347] mmc_queue_thread: status 0x00000900

[  291.714355] suspend: enter suspend(2010-02-17 23:49:16.650000000 UTC)

[  291.714416] PM: Syncing filesystems ... done.

[  291.714691] PM: Preparing system for mem sleep

[  291.750823] Freezing user space processes ... (elapsed 0.00 seconds) done.

[  291.757415] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.

[  291.758148] PM: Entering mem sleep

[  291.758270] Suspending console(s) (use no_console_suspend to debug)

[  291.762084] htc_pwrsink_set:STUB!

[  291.762420] Wake up in 43 seconds

[  291.762786] power_suspend_late return 0

[  291.763336] msm_rtc: Generating alarm event (src 2)

[  291.765502] clock-wince: pc_clk_set_rate: id=21 rate=144000

[  291.765533] htc_pwrsink_set:STUB!

[  291.767608] htc_pwrsink_set:STUB!

[  291.770172] htc_pwrsink_set:STUB!

[  291.798492] htc_pwrsink_set:STUB!

[  291.806610] htc_pwrsink_set:STUB!

[  291.806640] clock-wince: pc_clk_set_rate: id=21 rate=32000000

[  291.806671] htc_pwrsink_set:STUB!

[  291.806732] htc_pwrsink_set:STUB!

[  291.808227] hw3d_resume: resuming

[  291.825042] PM: Finishing wakeup.

[  291.831848] Restarting tasks ... done.

[  291.848815] suspend: exit suspend, ret = 0 (2010-02-17 23:49:59.760000000 UTC)

[  292.180023] mmc_queue_thread: status 0x00000900

[  293.795257] audmgr_rpc_thread() start

[  293.795318] [RPC] READ on ept c3342d20

[  293.797424] audio_enable()

[  293.797485] ++++++++++++++++++++++++++++++

[  293.797546] [RPC] CALL to 30000013:0 @ 0:00000001 (72 bytes)

[  293.807220] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:c3342d20

[  293.807373] [RPC] READ on ept c3342d20 (24 bytes)

[  293.807403] audmgr: rpc_reply status 0

[  293.807434] [RPC] READ on ept c3342d20

[  293.820495] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=64 dst=1:c3342d20

[  293.820648] [RPC] READ on ept c3342d20 (60 bytes)

[  293.820709] audmgr: rpc 1000000 0 14

[  293.820709] audmgr: rpc READY handle=0x00000000

[  293.820739] [RPC] REPLY to xid=38 @ id=0:00000001 (24 bytes)

[  293.820800] [RPC] READ on ept c3342d20

[  293.821014] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[  293.821197] [RR] o RESUME_TX id=0:00000001

[  293.884185] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=64 dst=1:c3342d20

[  293.884460] [RPC] READ on ept c3342d20 (60 bytes)

[  293.884490] audmgr: rpc 1000000 1000000 14

[  293.884552] audmgr: rpc CODEC_CONFIG volume=0x00007f64

[  293.884613] [RPC] REPLY to xid=39 @ id=0:00000001 (24 bytes)

[  293.884704] [RPC] READ on ept c3342d20

[  293.884857] audpp: enable

[  293.884979] adsp: opening module AUDPPTASK

[  293.885131] [RPC] CALL to 3000000a:0 @ 0:00000001 (56 bytes)

[  293.885192] [RPC] READ on ept c3342480

[  293.886596] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:c3342480

[  293.886871] [RPC] READ on ept c3342480 (24 bytes)

[  293.886932] adsp: module AUDPPTASK has been registered

[  293.887023] msm_adsp_enable() 'AUDPPTASK'

[  293.887084] [RPC] CALL to 3000000a:0 @ 0:00000001 (56 bytes)

[  293.887145] [RPC] READ on ept c3342480

[  293.891479] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=64 dst=1:fadefade

[  293.891784] [RPC] READ on ept d485c7a0 (60 bytes)

[  293.891845] adsp: rpc event=0, proc_id=2, module=4, image=0

[  293.891967] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:c3342480

[  293.892150] [RPC] READ on ept c3342480 (24 bytes)

[  293.892272] adsp: module AUDPPTASK: READY

[  293.892333] [RPC] REPLY to xid=3a @ id=0:00000001 (24 bytes)

[  293.892425] [RPC] READ on ept d485c7a0

[  293.893707] audpp: ENABLE

[  293.893768] audio_dsp_event: CFG_MSG ENABLE

[  293.901672] htc_pwrsink_set:STUB!

[  294.233978] request_suspend_state: wakeup (3->0) at 290220000000 (2010-02-17 23:50:02.120000000 UTC)

[  294.234222] epson_resume

[  294.234283] msmfb: panel waking

[  294.234313] msmfb: ready, waiting for full update

[  294.234344] hw3d_late_resume: resuming

[  294.234374] Sending arm9_low_speed 7

[  294.238372] microp-klt: Setting lcd-backlight brightness to: 0x00

[  294.243743] msmfb: full update starting

[  294.304077] fake vsync

[  294.304138] msmfb_start_dma 60.000 ms after vsync request

[  294.334991] msmfb: full update completed

[  294.335144] msmfb: turning on panel

[  294.335174] epson_unblank

[  294.335174] init epson panel

[  294.335205] blackstone panel init

[  294.441284] microp-klt: Setting lcd-backlight brightness to: 0x00

[  294.501800] microp-klt: Setting lcd-backlight brightness to: 0x00

[  294.526275] microp-klt: Setting lcd-backlight brightness to: 0x00

[  294.546569] microp-klt: Setting lcd-backlight brightness to: 0x10

[  294.566467] microp-klt: Setting lcd-backlight brightness to: 0x10

[  294.588592] microp-klt: Setting lcd-backlight brightness to: 0x10

[  294.606750] microp-klt: Setting lcd-backlight brightness to: 0x10

[  294.629333] microp-klt: Setting lcd-backlight brightness to: 0x10

[  294.660858] microp-klt: Setting lcd-backlight brightness to: 0x20

[  294.678222] microp-klt: Setting lcd-backlight brightness to: 0x20

[  294.704162] microp-klt: Setting lcd-backlight brightness to: 0x20

[  294.718597] microp-klt: Setting lcd-backlight brightness to: 0x20

[  294.738739] microp-klt: Setting lcd-backlight brightness to: 0x20

[  294.759094] microp-klt: Setting lcd-backlight brightness to: 0x30

[  296.523284] msmfb: panel awake

[  297.097808] audpp: DMA missed

[  302.838989] audio_disable()

[  302.840148] audio_dsp_event: CFG_MSG DISABLE

[  302.840209] audpp: disable

[  302.841278] msm_adsp_disable() 'AUDPPTASK'

[  302.841369] audpp: DISABLE

[  302.841522] [RPC] CALL to 3000000a:0 @ 0:00000001 (56 bytes)

[  302.841644] [RPC] READ on ept c3342480

[  302.842041] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe

[  302.842163] [RR] o RESUME_TX id=0:00000001

[  302.842681] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:c3342480

[  302.842926] [RPC] READ on ept c3342480 (24 bytes)

[  302.843048] adsp: closing module AUDPPTASK

[  302.843139] [RR] x REMOVE_CLIENT id=1:c3342480

[  302.843231] [RR] send control message cmd=6 srv.cmd=6 prog=00000001:c3342480 id=-1071397436:c005664c

[  302.843353] adsp: disable interrupt

[  302.843475] [RPC] CALL to 30000013:0 @ 0:00000001 (44 bytes)

[  302.868988] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:c3342d20

[  302.869293] [RPC] READ on ept c3342d20 (24 bytes)

[  302.869384] audmgr: rpc_reply status 0

[  302.869445] [RPC] READ on ept c3342d20

[  302.874877] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=64 dst=1:c3342d20

[  302.875122] [RPC] READ on ept c3342d20 (60 bytes)

[  302.875244] audmgr: rpc 1000000 6000000 14

[  302.875305] audmgr: DISABLED

[  302.875396] [RPC] REPLY to xid=3b @ id=0:00000001 (24 bytes)

[  302.875518] [RPC] READ on ept c3342d20

[  302.875701] ------------------------------

[  302.875793] htc_pwrsink_set:STUB!

[  302.876037] [RR] x RESUME_TX id=1:c3342d20

[  302.876129] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:c3342d20 id=-736395264:d41b9f6c

[  304.500762] microp-klt: Setting lcd-backlight brightness to: 0x20

[  304.512664] microp-klt: Setting lcd-backlight brightness to: 0x20

[  304.532623] microp-klt: Setting lcd-backlight brightness to: 0x20

[  304.552734] microp-klt: Setting lcd-backlight brightness to: 0x20

[  304.572875] microp-klt: Setting lcd-backlight brightness to: 0x20

[  304.593078] microp-klt: Setting lcd-backlight brightness to: 0x10

[  304.613616] microp-klt: Setting lcd-backlight brightness to: 0x10

[  304.634063] microp-klt: Setting lcd-backlight brightness to: 0x10

[  304.654510] microp-klt: Setting lcd-backlight brightness to: 0x10

[  304.674987] microp-klt: Setting lcd-backlight brightness to: 0x10

[  304.695465] microp-klt: Setting lcd-backlight brightness to: 0x00

[  304.715972] microp-klt: Setting lcd-backlight brightness to: 0x00

[  304.736633] microp-klt: Setting lcd-backlight brightness to: 0x00

[  304.756805] microp-klt: Setting lcd-backlight brightness to: 0x00

[  304.777862] microp-klt: Setting lcd-backlight brightness to: 0x00

[  304.798919] request_suspend_state: sleep (0->3) at 300620000000 (2010-02-17 23:50:12.520000000 UTC)

[  304.799163] Sending arm9_low_speed 2

[  304.799316] msmfb: panel sleeping

[  304.830352] epson_blank

[  304.830444] init epson blank

[  305.180786] blackstone panel deinit

[  305.242828] epson_suspend

[  305.243133] active wake lock PowerManagerService

[  305.243164] wake lock mmc_delayed_work, expired

[  305.243164] wake lock vbus_present, expired

[  305.243194] active wake lock SMD_DS, time left 34

[  305.583312] wake lock SMD_DS, expired

[  305.583740] suspend: enter suspend(2010-02-17 23:50:13.300000000 UTC)

[  305.583801] PM: Syncing filesystems ... done.

[  305.584014] PM: Preparing system for mem sleep

[  305.623840] Freezing user space processes ... (elapsed 0.00 seconds) done.

[  305.644012] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.

[  305.658081] PM: Entering mem sleep

[  305.664855] Suspending console(s) (use no_console_suspend to debug)

[  305.685028] htc_pwrsink_set:STUB!

[  305.685394] Wake up in 1462 seconds

[  305.685729] power_suspend_late return 0

[  305.688385] clock-wince: pc_clk_set_rate: id=21 rate=144000

[  305.688415] htc_pwrsink_set:STUB!

[  305.690490] htc_pwrsink_set:STUB!

[  305.693115] htc_pwrsink_set:STUB!

[  305.721435] htc_pwrsink_set:STUB!

[  305.729553] htc_pwrsink_set:STUB!

[  305.729614] clock-wince: pc_clk_set_rate: id=21 rate=32000000

[  305.729614] htc_pwrsink_set:STUB!

[  305.729675] htc_pwrsink_set:STUB!

[  305.731201] hw3d_resume: resuming

[  305.839019] PM: Finishing wakeup.

[  305.846008] Restarting tasks ... done.

[  305.862701] suspend: exit suspend, ret = 0 (2010-02-17 23:50:36.760000000 UTC)

[  306.349151] wake lock SMD_DS, expired

[  306.349273] wake lock SMD_DATA1, expired

[  306.349334] wake lock mmc_delayed_work, expired

[  306.350189] suspend: enter suspend(2010-02-17 23:50:37.240000000 UTC)

[  306.350311] PM: Syncing filesystems ... done.

[  306.350952] PM: Preparing system for mem sleep

[  306.408569] Freezing user space processes ... (elapsed 0.02 seconds) done.

[  306.476928] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.

[  306.531860] PM: Entering mem sleep

[  306.558654] Suspending console(s) (use no_console_suspend to debug)

[  306.619018] htc_pwrsink_set:STUB!

[  306.619506] Wake up in 1438 seconds

[  306.620056] power_suspend_late return 0

[  306.623229] clock-wince: pc_clk_set_rate: id=21 rate=144000

[  306.623291] htc_pwrsink_set:STUB!

[  306.625396] htc_pwrsink_set:STUB!

[  306.628143] htc_pwrsink_set:STUB!

[  306.655731] htc_pwrsink_set:STUB!

[  306.663818] htc_pwrsink_set:STUB!

[  306.663879] clock-wince: pc_clk_set_rate: id=21 rate=32000000

[  306.663909] htc_pwrsink_set:STUB!

[  306.663970] htc_pwrsink_set:STUB!

[  306.665496] hw3d_resume: resuming

[  306.770690] PM: Finishing wakeup.

[  306.777893] Restarting tasks ... done.

[  306.795867] suspend: exit suspend, ret = 0 (2010-02-17 23:50:47.760000000 UTC)

[  307.280792] wake lock SMD_DS, expired

[  307.280914] wake lock mmc_delayed_work, expired

[  307.280975] wake lock SMD_DATA1, expired

[  307.281829] suspend: enter suspend(2010-02-17 23:50:48.240000000 UTC)

[  307.281921] PM: Syncing filesystems ... done.

[  307.282562] PM: Preparing system for mem sleep

[  307.351257] Freezing user space processes ... (elapsed 0.01 seconds) done.

[  307.419738] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.

[  307.474670] PM: Entering mem sleep

[  307.501434] Suspending console(s) (use no_console_suspend to debug)

[  307.561737] htc_pwrsink_set:STUB!

[  307.562225] Wake up in 1427 seconds

[  307.562774] power_suspend_late return 0

[  307.566070] clock-wince: pc_clk_set_rate: id=21 rate=144000

[  307.566162] htc_pwrsink_set:STUB!

[  307.568267] htc_pwrsink_set:STUB!

[  307.570983] htc_pwrsink_set:STUB!

[  307.597167] htc_pwrsink_set:STUB!

[  307.605102] htc_pwrsink_set:STUB!

[  307.605224] clock-wince: pc_clk_set_rate: id=21 rate=32000000

[  307.605285] htc_pwrsink_set:STUB!

[  307.605407] htc_pwrsink_set:STUB!

[  307.607330] hw3d_resume: resuming

[  308.009674] PM: Finishing wakeup.

[  308.036499] Restarting tasks ... <6>request_suspend_state: wakeup (3->0) at 302960000000 (2010-02-17 23:51:19.780000000 UTC)

[  308.280853] microp-klt: Setting lcd-backlight brightness to: 0x00

[  308.315002] done.

[  308.323638] suspend: exit suspend, ret = 0 (2010-02-17 23:51:19.900000000 UTC)

[  308.323760] epson_resume

[  308.323791] msmfb: panel waking

[  308.323822] msmfb: ready, waiting for full update

[  308.323852] hw3d_late_resume: resuming

[  308.323883] Sending arm9_low_speed 7

[  308.340057] msmfb: full update starting

[  308.395629] fake vsync

[  308.395721] msmfb_start_dma 60.000 ms after vsync request

[  308.400512] microp-klt: Setting lcd-backlight brightness to: 0x00

[  308.416473] microp-klt: Setting lcd-backlight brightness to: 0x00

[  308.426574] msmfb: full update completed

[  308.427398] msmfb: turning on panel

[  308.427459] epson_unblank

[  308.427490] init epson panel

[  308.427490] blackstone panel init

[  308.436676] microp-klt: Setting lcd-backlight brightness to: 0x00

[  308.457489] microp-klt: Setting lcd-backlight brightness to: 0x10

[  308.477111] microp-klt: Setting lcd-backlight brightness to: 0x10

[  308.497222] microp-klt: Setting lcd-backlight brightness to: 0x10

[  308.517395] microp-klt: Setting lcd-backlight brightness to: 0x10

[  308.543182] microp-klt: Setting lcd-backlight brightness to: 0x10

[  308.605468] microp-klt: Setting lcd-backlight brightness to: 0x20

[  308.618377] microp-klt: Setting lcd-backlight brightness to: 0x20

[  308.638275] microp-klt: Setting lcd-backlight brightness to: 0x20

[  308.659576] microp-klt: Setting lcd-backlight brightness to: 0x20

[  308.678985] microp-klt: Setting lcd-backlight brightness to: 0x20

[  308.699432] microp-klt: Setting lcd-backlight brightness to: 0x30

[  310.571411] msmfb: panel awake

[  317.128570] microp-klt: Setting lcd-backlight brightness to: 0x20

[  317.142547] microp-klt: Setting lcd-backlight brightness to: 0x20

[  317.162536] microp-klt: Setting lcd-backlight brightness to: 0x20

[  317.182556] microp-klt: Setting lcd-backlight brightness to: 0x20

[  317.202697] microp-klt: Setting lcd-backlight brightness to: 0x20

[  317.223022] microp-klt: Setting lcd-backlight brightness to: 0x10

[  317.243133] microp-klt: Setting lcd-backlight brightness to: 0x10

[  317.263305] microp-klt: Setting lcd-backlight brightness to: 0x10

[  317.283508] microp-klt: Setting lcd-backlight brightness to: 0x10

[  317.303802] microp-klt: Setting lcd-backlight brightness to: 0x10

[  317.324188] microp-klt: Setting lcd-backlight brightness to: 0x00

[  317.344177] microp-klt: Setting lcd-backlight brightness to: 0x00

[  317.364288] microp-klt: Setting lcd-backlight brightness to: 0x00

[  317.384460] microp-klt: Setting lcd-backlight brightness to: 0x00

[  317.404632] microp-klt: Setting lcd-backlight brightness to: 0x00

[  317.425842] request_suspend_state: sleep (0->3) at 312110000000 (2010-02-17 23:51:28.930000000 UTC)

[  317.425994] Sending arm9_low_speed 2

[  317.426116] msmfb: panel sleeping

[  317.464752] epson_blank

[  317.464843] init epson blank

[  317.757171] blackstone panel deinit

[  317.819244] epson_suspend

[  317.819580] active wake lock PowerManagerService

[  317.819610] wake lock mmc_delayed_work, expired

[  317.819641] wake lock vbus_present, expired

[  317.819641] active wake lock SMD_DS, time left 34

[  318.160247] wake lock SMD_DS, expired

[  318.160644] suspend: enter suspend(2010-02-17 23:51:29.660000000 UTC)

[  318.160675] PM: Syncing filesystems ... done.

[  318.160888] PM: Preparing system for mem sleep

[  318.201019] Freezing user space processes ... (elapsed 0.01 seconds) done.

[  318.221221] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.

[  318.235412] PM: Entering mem sleep

[  318.242187] Suspending console(s) (use no_console_suspend to debug)

[  318.259460] htc_pwrsink_set:STUB!

[  318.259796] Wake up in 1386 seconds

[  318.260162] power_suspend_late return 0

[  318.262664] clock-wince: pc_clk_set_rate: id=21 rate=144000

[  318.262695] htc_pwrsink_set:STUB!

[  318.264770] htc_pwrsink_set:STUB!

[  318.267333] htc_pwrsink_set:STUB!

[  318.295593] htc_pwrsink_set:STUB!

[  318.303680] htc_pwrsink_set:STUB!

[  318.303741] clock-wince: pc_clk_set_rate: id=21 rate=32000000

[  318.303771] htc_pwrsink_set:STUB!

[  318.303833] htc_pwrsink_set:STUB!

[  318.305328] hw3d_resume: resuming

[  318.408905] PM: Finishing wakeup.

[  318.415740] Restarting tasks ... <6>request_suspend_state: wakeup (3->0) at 312980000000 (2010-02-17 23:51:29.800000000 UTC)

[  318.452117] microp-klt: Setting lcd-backlight brightness to: 0x00

[  318.467254] done.

[  318.474761] suspend: exit suspend, ret = 0 (2010-02-17 23:51:29.820000000 UTC)

[  318.474792] epson_resume

[  318.474822] msmfb: panel waking

[  318.474853] msmfb: ready, waiting for full update

[  318.474884] hw3d_late_resume: resuming

[  318.474884] Sending arm9_low_speed 7

[  318.570159] msmfb: full update starting

[  318.622619] fake vsync

[  318.622711] msmfb_start_dma 60.000 ms after vsync request

[  318.634307] microp-klt: Setting lcd-backlight brightness to: 0x00

[  318.653564] msmfb: full update completed

[  318.654510] msmfb: turning on panel

[  318.654693] epson_unblank

[  318.654754] init epson panel

[  318.654754] blackstone panel init

[  318.657836] microp-klt: Setting lcd-backlight brightness to: 0x00

[  318.675354] microp-klt: Setting lcd-backlight brightness to: 0x00

[  318.724212] microp-klt: Setting lcd-backlight brightness to: 0x10

[  318.745849] microp-klt: Setting lcd-backlight brightness to: 0x10

[  318.774505] microp-klt: Setting lcd-backlight brightness to: 0x10

[  318.805053] microp-klt: Setting lcd-backlight brightness to: 0x10

[  318.824981] microp-klt: Setting lcd-backlight brightness to: 0x10

[  318.845031] microp-klt: Setting lcd-backlight brightness to: 0x20

[  318.865539] microp-klt: Setting lcd-backlight brightness to: 0x20

[  318.886016] microp-klt: Setting lcd-backlight brightness to: 0x20

[  318.906494] microp-klt: Setting lcd-backlight brightness to: 0x20

[  318.927001] microp-klt: Setting lcd-backlight brightness to: 0x20

[  318.947448] microp-klt: Setting lcd-backlight brightness to: 0x30

[  320.778533] msmfb: panel awake

[  323.008575] microp-klt: Setting lcd-backlight brightness to: 0x20

[  323.021667] microp-klt: Setting lcd-backlight brightness to: 0x20

[  323.041656] microp-klt: Setting lcd-backlight brightness to: 0x20

[  323.061767] microp-klt: Setting lcd-backlight brightness to: 0x20

[  323.081878] microp-klt: Setting lcd-backlight brightness to: 0x20

[  323.102142] microp-klt: Setting lcd-backlight brightness to: 0x10

[  323.122406] microp-klt: Setting lcd-backlight brightness to: 0x10

[  323.143218] microp-klt: Setting lcd-backlight brightness to: 0x10

[  323.162261] microp-klt: Setting lcd-backlight brightness to: 0x10

[  323.182739] microp-klt: Setting lcd-backlight brightness to: 0x10

[  323.203002] microp-klt: Setting lcd-backlight brightness to: 0x00

[  323.223510] microp-klt: Setting lcd-backlight brightness to: 0x00

[  323.243957] microp-klt: Setting lcd-backlight brightness to: 0x00

[  323.264404] microp-klt: Setting lcd-backlight brightness to: 0x00

[  323.284912] microp-klt: Setting lcd-backlight brightness to: 0x00

[  323.307250] request_suspend_state: sleep (0->3) at 317750000000 (2010-02-17 23:51:34.570000000 UTC)

[  323.307373] Sending arm9_low_speed 2

[  323.307464] msmfb: panel sleeping

[  323.338409] epson_blank

[  323.338470] init epson blank

[  323.627593] blackstone panel deinit

[  323.689575] epson_suspend

[  323.689910] active wake lock PowerManagerService

[  323.689941] wake lock mmc_delayed_work, expired

[  323.689941] wake lock vbus_present, expired

[  323.689971] active wake lock SMD_DS, time left 34

[  323.918609] request_suspend_state: wakeup (3->0) at 318360000000 (2010-02-17 23:51:35.180000000 UTC)

[  323.918731] epson_resume

[  323.918762] msmfb: panel waking

[  323.918792] msmfb: ready, waiting for full update

[  323.918823] hw3d_late_resume: resuming

[  323.918823] Sending arm9_low_speed 7

[  323.920989] microp-klt: Setting lcd-backlight brightness to: 0x00

[  324.205200] microp-klt: Setting lcd-backlight brightness to: 0x00

[  324.262237] microp-klt: Setting lcd-backlight brightness to: 0x00

[  324.283081] microp-klt: Setting lcd-backlight brightness to: 0x00

[  324.286224] msmfb: full update starting

[  324.301666] microp-klt: Setting lcd-backlight brightness to: 0x10

[  324.341613] fake vsync

[  324.341674] msmfb_start_dma 60.000 ms after vsync request

[  324.342254] microp-klt: Setting lcd-backlight brightness to: 0x10

[  324.362457] microp-klt: Setting lcd-backlight brightness to: 0x10

[  324.372528] msmfb: full update completed

[  324.372680] msmfb: turning on panel

[  324.372741] epson_unblank

[  324.372741] init epson panel

[  324.372772] blackstone panel init

[  324.382476] microp-klt: Setting lcd-backlight brightness to: 0x10

[  324.402709] microp-klt: Setting lcd-backlight brightness to: 0x10

[  324.422851] microp-klt: Setting lcd-backlight brightness to: 0x20

[  324.443572] microp-klt: Setting lcd-backlight brightness to: 0x20

[  324.463623] microp-klt: Setting lcd-backlight brightness to: 0x20

[  324.483978] microp-klt: Setting lcd-backlight brightness to: 0x20

[  324.504455] microp-klt: Setting lcd-backlight brightness to: 0x20

[  324.524719] microp-klt: Setting lcd-backlight brightness to: 0x30

[  326.548278] msmfb: panel awake

[  329.518524] microp-klt: Setting lcd-backlight brightness to: 0x20

[  329.530364] microp-klt: Setting lcd-backlight brightness to: 0x20

[  329.550354] microp-klt: Setting lcd-backlight brightness to: 0x20

[  329.570434] microp-klt: Setting lcd-backlight brightness to: 0x20

[  329.590576] microp-klt: Setting lcd-backlight brightness to: 0x20

[  329.610778] microp-klt: Setting lcd-backlight brightness to: 0x10

[  329.630981] microp-klt: Setting lcd-backlight brightness to: 0x10

[  329.651184] microp-klt: Setting lcd-backlight brightness to: 0x10

[  329.671112] microp-klt: Setting lcd-backlight brightness to: 0x10

[  329.691558] microp-klt: Setting lcd-backlight brightness to: 0x10

[  329.712066] microp-klt: Setting lcd-backlight brightness to: 0x00

[  329.732391] microp-klt: Setting lcd-backlight brightness to: 0x00

[  329.754974] microp-klt: Setting lcd-backlight brightness to: 0x00

[  329.773498] microp-klt: Setting lcd-backlight brightness to: 0x00

[  329.793945] microp-klt: Setting lcd-backlight brightness to: 0x00

[  329.816192] request_suspend_state: sleep (0->3) at 324150000000 (2010-02-17 23:51:40.970000000 UTC)

[  329.821197] Sending arm9_low_speed 2

[  329.821350] msmfb: panel sleeping

[  329.854309] epson_blank

[  329.854370] init epson blank

[  330.187103] blackstone panel deinit

[  330.249176] epson_suspend

[  330.249511] active wake lock PowerManagerService

[  330.249542] wake lock mmc_delayed_work, expired

[  330.249572] wake lock vbus_present, expired

[  330.249603] active wake lock SMD_DS, time left 21

[  330.458557] wake lock SMD_DS, expired

[  330.459289] suspend: enter suspend(2010-02-17 23:51:41.610000000 UTC)

[  330.459411] PM: Syncing filesystems ... done.

[  330.459747] PM: Preparing system for mem sleep

[  330.498840] Freezing user space processes ... (elapsed 0.00 seconds) done.

[  330.519256] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.

[  330.533691] PM: Entering mem sleep

[  330.540771] Suspending console(s) (use no_console_suspend to debug)

[  330.558197] htc_pwrsink_set:STUB!

[  330.558563] Wake up in 1374 seconds

[  330.558898] power_suspend_late return 0

[  330.561462] clock-wince: pc_clk_set_rate: id=21 rate=144000

[  330.561523] htc_pwrsink_set:STUB!

[  330.563568] htc_pwrsink_set:STUB!

[  330.566162] htc_pwrsink_set:STUB!

[  330.594390] htc_pwrsink_set:STUB!

[  330.602294] htc_pwrsink_set:STUB!

[  330.602355] clock-wince: pc_clk_set_rate: id=21 rate=32000000

[  330.602355] htc_pwrsink_set:STUB!

[  330.602416] htc_pwrsink_set:STUB!

[  330.603942] hw3d_resume: resuming

[  330.711029] PM: Finishing wakeup.

[  330.718109] Restarting tasks ... <6>request_suspend_state: wakeup (3->0) at 324970000000 (2010-02-17 23:52:09.790000000 UTC)

[  330.814941] microp-klt: Setting lcd-backlight brightness to: 0x00

[  330.849914] done.

[  330.857543] suspend: exit suspend, ret = 0 (2010-02-17 23:52:09.860000000 UTC)

[  330.857574] epson_resume

[  330.857604] msmfb: panel waking

[  330.857635] msmfb: ready, waiting for full update

[  330.857635] hw3d_late_resume: resuming

[  330.857666] Sending arm9_low_speed 7

[  330.899536] microp-klt: Setting lcd-backlight brightness to: 0x00

[  330.907836] msmfb: full update starting

[  330.920745] microp-klt: Setting lcd-backlight brightness to: 0x00

[  330.940826] microp-klt: Setting lcd-backlight brightness to: 0x00

[  330.960388] fake vsync

[  330.960479] msmfb_start_dma 60.000 ms after vsync request

[  330.961212] microp-klt: Setting lcd-backlight brightness to: 0x10

[  330.981903] microp-klt: Setting lcd-backlight brightness to: 0x10

[  330.991302] msmfb: full update completed

[  330.991485] msmfb: turning on panel

[  330.991516] epson_unblank

[  330.991516] init epson panel

[  330.991516] blackstone panel init

[  331.001525] microp-klt: Setting lcd-backlight brightness to: 0x10

[  331.021667] microp-klt: Setting lcd-backlight brightness to: 0x10

[  331.072998] microp-klt: Setting lcd-backlight brightness to: 0x10

[  331.103759] microp-klt: Setting lcd-backlight brightness to: 0x20

[  331.124969] microp-klt: Setting lcd-backlight brightness to: 0x20

[  331.153503] microp-klt: Setting lcd-backlight brightness to: 0x20

[  331.173492] microp-klt: Setting lcd-backlight brightness to: 0x20

[  331.193786] microp-klt: Setting lcd-backlight brightness to: 0x20

[  331.214294] microp-klt: Setting lcd-backlight brightness to: 0x30

[  333.104766] msmfb: panel awake

[  335.069122] mmc_queue_thread: status 0x00000900

[  547.201385] microp-klt: Setting lcd-backlight brightness to: 0x20

[  547.216583] microp-klt: Setting lcd-backlight brightness to: 0x20

[  547.236846] microp-klt: Setting lcd-backlight brightness to: 0x20

[  547.257080] microp-klt: Setting lcd-backlight brightness to: 0x20

[  547.277191] microp-klt: Setting lcd-backlight brightness to: 0x20

[  547.297393] microp-klt: Setting lcd-backlight brightness to: 0x10

[  547.317291] microp-klt: Setting lcd-backlight brightness to: 0x10

[  547.337554] microp-klt: Setting lcd-backlight brightness to: 0x10

[  547.357757] microp-klt: Setting lcd-backlight brightness to: 0x10

[  547.377899] microp-klt: Setting lcd-backlight brightness to: 0x10

[  547.398040] microp-klt: Setting lcd-backlight brightness to: 0x00

[  547.418121] microp-klt: Setting lcd-backlight brightness to: 0x00

[  547.438171] microp-klt: Setting lcd-backlight brightness to: 0x00

[  547.476654] microp-klt: Setting lcd-backlight brightness to: 0x00

[  547.499359] microp-klt: Setting lcd-backlight brightness to: 0x00

[  547.519714] request_suspend_state: sleep (0->3) at 538110000000 (2010-02-17 23:55:42.930000000 UTC)

[  547.519805] Sending arm9_low_speed 2

[  547.519897] msmfb: panel sleeping

[  547.522613] request_suspend_state: wakeup (3->0) at 538110000000 (2010-02-17 23:55:42.930000000 UTC)

[  547.553161] epson_blank

[  547.553222] init epson blank

[  547.891662] blackstone panel deinit

[  547.953674] epson_suspend

[  547.958770] epson_resume

[  547.958831] msmfb: panel waking

[  547.958862] msmfb: ready, waiting for full update

[  547.958892] hw3d_late_resume: resuming

[  547.958923] Sending arm9_low_speed 7

[  548.112854] msmfb: full update starting

[  548.173126] fake vsync

[  548.173217] msmfb_start_dma 60.000 ms after vsync request

[  548.204071] msmfb: full update completed

[  548.204193] msmfb: turning on panel

[  548.204223] epson_unblank

[  548.204254] init epson panel

[  548.204284] blackstone panel init

[  549.189361] microp-klt: Setting lcd-backlight brightness to: 0x00

[  549.241485] microp-klt: Setting lcd-backlight brightness to: 0x00

[  549.290466] microp-klt: Setting lcd-backlight brightness to: 0x00

[  549.323059] microp-klt: Setting lcd-backlight brightness to: 0x00

[  549.346435] msm_i2c msm_i2c.0: error, status 21d0

[  551.334411] msm_i2c msm_i2c.0: Error waiting for notbusy

[  551.334503] msm_i2c msm_i2c.0: Error during data xfer (-5)

[  551.334655] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  551.334899] micropklt_read: error while reading data at address 66,33: -5

[  551.335052] microp-klt: Setting lcd-backlight brightness to: 0x10

[  553.322509] msm_i2c msm_i2c.0: Error waiting for notbusy

[  553.322692] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  553.322906] Couldn't send ch id 70

[  553.523437] msmfb_pan_display timeout waiting for frame start, 1 1

[  555.331787] msm_i2c msm_i2c.0: Error waiting for notbusy

[  555.331939] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  555.332214] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16

[  557.373443] msm_i2c msm_i2c.0: Error waiting for notbusy

[  557.373535] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  557.373565] Couldn't send ch id 22

[  557.424133] microp-klt: Setting lcd-backlight brightness to: 0x10

[  558.630401] msmfb_pan_display timeout waiting for frame start, 1 1

[  559.388092] msm_i2c msm_i2c.0: Error waiting for notbusy

[  559.388275] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  559.388519] Couldn't send ch id 70

[  561.401184] msm_i2c msm_i2c.0: Error waiting for notbusy

[  561.401336] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  561.401611] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16

[  563.450012] msm_i2c msm_i2c.0: Error waiting for notbusy

[  563.450073] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  563.450134] Couldn't send ch id 22

[  563.481292] microp-klt: Setting lcd-backlight brightness to: 0x10

[  563.723480] msmfb_pan_display timeout waiting for frame start, 1 1

[  565.489715] msm_i2c msm_i2c.0: Error waiting for notbusy

[  565.489868] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  565.490112] Couldn't send ch id 70

[  567.478118] msm_i2c msm_i2c.0: Error waiting for notbusy

[  567.478271] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  567.478393] Couldn't send ch id 22

[  568.864196] msmfb_pan_display timeout waiting for frame start, 1 1

[  569.471832] msm_i2c msm_i2c.0: Error waiting for notbusy

[  569.472015] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  569.472320] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16

[  571.527404] msm_i2c msm_i2c.0: Error waiting for notbusy

[  571.527587] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  571.527862] Couldn't send ch id 70

[  573.528106] msm_i2c msm_i2c.0: Error waiting for notbusy

[  573.528289] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  573.528594] micropklt_read: error while asking for data address 66,33: -16

[  573.528747] microp-klt: Setting lcd-backlight brightness to: 0x10

[  575.548461] msm_i2c msm_i2c.0: Error waiting for notbusy

[  575.548675] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  575.548950] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16

[  577.598937] msm_i2c msm_i2c.0: Error waiting for notbusy

[  577.599151] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  577.599426] Couldn't send ch id 70

[  579.609771] msm_i2c msm_i2c.0: Error waiting for notbusy

[  579.609985] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  579.610107] Couldn't send ch id 22

[  581.669006] msm_i2c msm_i2c.0: Error waiting for notbusy

[  581.669219] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  581.669372] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16

[  581.739471] hsusb: OFFLINE -> ONLINE

[  581.739624] hsusb: reset controller

[  581.790954] usb: notify offline

[  581.800476] usb: suspend

[  581.910278] usb: reset

[  581.912536] usb: portchange USB_SPEED_HIGH

[  581.959472] usb: reset

[  581.961730] usb: portchange USB_SPEED_HIGH

[  582.075042] usb_mass_storage usb_mass_storage: config #1

[  583.718536] msm_i2c msm_i2c.0: Error waiting for notbusy

[  583.718749] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  583.719055] Couldn't send ch id 70

[  585.723144] msm_i2c msm_i2c.0: Error waiting for notbusy

[  585.723358] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  585.723663] micropklt_read: error while asking for data address 66,33: -16

[  585.723846] microp-klt: Setting lcd-backlight brightness to: 0x10

[  587.713317] msm_i2c msm_i2c.0: Error waiting for notbusy

[  587.713531] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  587.713684] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16

[  589.777374] msm_i2c msm_i2c.0: Error waiting for notbusy

[  589.777587] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  589.777862] Couldn't send ch id 70

[  591.785308] msm_i2c msm_i2c.0: Error waiting for notbusy

[  591.785522] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  591.785644] Couldn't send ch id 22

[  593.786041] msm_i2c msm_i2c.0: Error waiting for notbusy

[  593.786254] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  593.786560] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16

[  595.865875] msm_i2c msm_i2c.0: Error waiting for notbusy

[  595.866088] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  595.866363] Couldn't send ch id 70

[  597.873901] msm_i2c msm_i2c.0: Error waiting for notbusy

[  597.874114] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  597.874420] micropklt_read: error while asking for data address 66,33: -16

[  597.874603] microp-klt: Setting lcd-backlight brightness to: 0x20

[  599.894836] msm_i2c msm_i2c.0: Error waiting for notbusy

[  599.895050] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  599.895355] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16

[  601.889801] msm_i2c msm_i2c.0: Error waiting for notbusy

[  601.890014] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  601.890289] Couldn't send ch id 70

[  603.880310] msm_i2c msm_i2c.0: Error waiting for notbusy

[  603.880493] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  603.880615] Couldn't send ch id 22

[  605.885406] msm_i2c msm_i2c.0: Error waiting for notbusy

[  605.885620] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  605.885925] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16

[  607.948028] msm_i2c msm_i2c.0: Error waiting for notbusy

[  607.948242] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  607.948516] Couldn't send ch id 70

[  609.958984] msm_i2c msm_i2c.0: Error waiting for notbusy

[  609.959197] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  609.959503] micropklt_read: error while asking for data address 66,33: -16

[  609.959686] microp-klt: Setting lcd-backlight brightness to: 0x20

[  611.959930] msm_i2c msm_i2c.0: Error waiting for notbusy

[  611.960144] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  611.960449] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16

[  614.042846] msm_i2c msm_i2c.0: Error waiting for notbusy

[  614.043060] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  614.043365] Couldn't send ch id 70

[  616.078063] msm_i2c msm_i2c.0: Error waiting for notbusy

[  616.078277] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  616.078399] Couldn't send ch id 22

[  618.116149] msm_i2c msm_i2c.0: Error waiting for notbusy

[  618.116333] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  618.116638] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16

[  620.173431] msm_i2c msm_i2c.0: Error waiting for notbusy

[  620.173645] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  620.173919] Couldn't send ch id 70

[  622.184600] msm_i2c msm_i2c.0: Error waiting for notbusy

[  622.184814] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  622.185119] micropklt_read: error while asking for data address 66,33: -16

[  622.185302] microp-klt: Setting lcd-backlight brightness to: 0x20

[  624.208251] msm_i2c msm_i2c.0: Error waiting for notbusy

[  624.208343] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  624.208526] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16

[  626.271850] msm_i2c msm_i2c.0: Error waiting for notbusy

[  626.272033] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  626.272308] Couldn't send ch id 70

[  628.272583] msm_i2c msm_i2c.0: Error waiting for notbusy

[  628.272796] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  628.272918] Couldn't send ch id 22

[  630.284698] msm_i2c msm_i2c.0: Error waiting for notbusy

[  630.284759] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  630.284912] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16

[  632.276245] msm_i2c msm_i2c.0: Error waiting for notbusy

[  632.276397] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  632.276672] Couldn't send ch id 70

[  633.531616] msmfb_pan_display timeout waiting for frame start, 1 1

[  634.269866] msm_i2c msm_i2c.0: Error waiting for notbusy

[  634.270080] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  634.270355] micropklt_read: error while asking for data address 66,33: -16

[  634.270538] microp-klt: Setting lcd-backlight brightness to: 0x20

[  636.285278] msm_i2c msm_i2c.0: Error waiting for notbusy

[  636.285461] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100

[  636.285797] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16