My Pastes
Public Pastes
Layout Width
Share Pastebin
Guest
Public paste!

mcdull

By: a guest | Feb 6th, 2010 | Syntax: None | Size: 156.87 KB | Hits: 96 | Expires: Never
Download | Raw | Embed | Report abuse
Copy text to clipboard
  1. [    0.000000] Linux version 2.6.27-00851-g101031a (GlemSom@autobuild-service_20100205_224500) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #1 PREEMPT Fri Feb 5 22:48:21 CET 2010
  2. [    0.000000] CPU: ARMv6-compatible processor [4117b362] revision 2 (ARMv6TEJ), cr=00c5387f
  3. [    0.000000] Machine: HTC blackstone cellphone (aka HTC Touch HD)
  4. [    0.000000] fixup: nr_banks = 2
  5. [    0.000000] fixup: bank0 start=10000000, node=00000000, size=06b00000
  6. [    0.000000] fixup: bank1 start=20000000, node=00000000, size=04d00000
  7. [    0.000000] Ignoring unrecognised tag 0x00000000
  8. [    0.000000] Memory policy: ECC disabled, Data cache writeback
  9. [    0.000000] On node 0 totalpages: 47104
  10. [    0.000000] free_area_init_node: node 0, pgdat c02f98f4, node_mem_map c06d8000
  11. [    0.000000]   DMA zone: 46438 pages, LIFO batch:15
  12. [    0.000000] CPU0: D VIPT write-back cache
  13. [    0.000000] CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
  14. [    0.000000] CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
  15. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 46438
  16. [    0.000000] Kernel command line: lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3
  17. [    0.000000] Unknown boot option `lcd.density=240': ignoring
  18. [    0.000000] Unknown boot option `clock-7x00.a11=500': ignoring
  19. [    0.000000] Unknown boot option `pmem.extra=1': ignoring
  20. [    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
  21. [    0.000274] Console: colour dummy device 80x30
  22. [    0.000305] console [tty0] enabled
  23. [    0.001281] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  24. [    0.002532] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  25. [    0.020629] Memory: 107MB 77MB = 184MB total
  26. [    0.020690] Memory: 180344KB available (2716K code, 1303K data, 120K init)
  27. [    0.021911] Calibrating delay loop... 527.56 BogoMIPS (lpj=2637824)
  28. [    0.270965] Mount-cache hash table entries: 512
  29. [    0.272369] CPU: Testing write buffer coherency: ok
  30. [    0.275177] net_namespace: 804 bytes
  31. [    0.276702] NET: Registered protocol family 16
  32. [    0.277740] acpu_clock_init()
  33. [    0.277832] ACPU running at 528000 KHz
  34. [    0.277893] msm_proc_comm_wince_init: WinCE PCOM initialized.
  35. [    0.277984] PLL0 @ f8005300: MODE=00000007 L=0000000c M=00000004 N=00000005 freq=245760000 Hz (245 MHz)
  36. [    0.278076] PLL1 @ f800531c: MODE=00000007 L=00000028 M=00000000 N=00000001 freq=768000000 Hz (768 MHz)
  37. [    0.278167] PLL2 @ f8005338: MODE=00000007 L=00000037 M=00000000 N=00000001 freq=1056000000 Hz (1056 MHz)
  38. [    0.278259] PLL3 @ f8005354: MODE=00000000 L=0000002d M=00000000 N=00000001 freq=864000000 Hz (864 MHz)
  39. [    0.278320] PCB XC: 00000003
  40. [    0.278350] AMSS version: 52.69.25.37U
  41. [    0.279846] vreg_get: gp6 -> 23
  42. [    0.279876] vreg_get: msmp -> 1
  43. [    0.279907] vreg_get: msme1 -> 2
  44. [    0.279907] vreg_get: rftx -> 11
  45. [    0.279937] MMC: WiFi device enable
  46. [    0.280151] MMC: SD-Card interface enable
  47. [    0.735839] msm_i2c_probe
  48. [    0.736083] msm_i2c_probe: clk_ctl 35d, 100000 Hz
  49. [    0.736999] msm_i2c msm_i2c.0: IRQ but nothing to do!, status 0
  50. [    0.761169] Bluetooth: Core ver 2.13
  51. [    0.761901] NET: Registered protocol family 31
  52. [    0.761993] Bluetooth: HCI device and connection manager initialized
  53. [    0.762054] Bluetooth: HCI socket layer initialized
  54. [    0.764862] NET: Registered protocol family 2
  55. [    0.851531] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  56. [    0.852539] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  57. [    0.853210] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  58. [    0.853546] TCP: Hash tables configured (established 8192 bind 8192)
  59. [    0.853607] TCP reno registered
  60. [    0.881652] NET: Registered protocol family 1
  61. [    0.882690] Unpacking initramfs... done
  62. [    1.555725] Freeing initrd memory: 1854K
  63. [    1.556549] [HTC] htc_hw_init: Initializing HTC hardware platform driver
  64. [    1.556884] [HTC] htc_hw_probe: done
  65. [    1.557769] smd_init()
  66. [    1.557861] smd_core_init()
  67. [    1.558013] smd_core_init() done
  68. [    1.558563] smd_alloc_channel() 'SMD_DS' cid=0
  69. [    1.558898] smd_alloc_channel() 'SMD_RPCCALL' cid=2
  70. [    1.559173] smd_alloc_channel() 'SMD_CONTROL' cid=5
  71. [    1.559387] smd_alloc_channel() 'SMD_DATA1' cid=7
  72. [    1.559631] smd_alloc_channel() 'SMD_DATA2' cid=8
  73. [    1.559844] smd_alloc_channel() 'SMD_DATA3' cid=9
  74. [    1.560089] smd_alloc_channel() 'SMD_DATA9' cid=15
  75. [    1.560333] smd_alloc_channel() 'SMD_DATA11' cid=17
  76. [    1.560577] smd_alloc_channel() 'SMD_GPSNMEA' cid=27
  77. [    1.561706] RPC rpcrouter_init
  78. [    1.562469] RPC_dev init complete!
  79. [    1.562500] RPC Init done
  80. [    1.562622] RPCCALL opened
  81. [    1.562652] [RR] send control message cmd=3 srv.cmd=3 prog=00000000:0 id=0:00000000
  82. [    1.614227] [RR] send control message cmd=2 srv.cmd=2 prog=00000000:0 id=0:00000000
  83. [    1.614929] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  84. [    1.615051] [RR] o NEW_SERVER id=0:00000001 prog=30000025:0
  85. [    1.615570] rpcrouter_create_server: 30000025:0
  86. [    1.616119] rpcrouter_create_server: rs30000025:00000000
  87. [    1.616241] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  88. [    1.616363] [RR] o NEW_SERVER id=0:00000001 prog=30000043:0
  89. [    1.616882] rpcrouter_create_server: 30000043:0
  90. [    1.617401] rpcrouter_create_server: rs30000043:00000000
  91. [    1.617492] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  92. [    1.617614] [RR] o NEW_SERVER id=0:00000001 prog=30000005:0
  93. [    1.618103] rpcrouter_create_server: 30000005:0
  94. [    1.618560] rpcrouter_create_server: rs30000005:00000000
  95. [    1.618682] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  96. [    1.618774] [RR] o NEW_SERVER id=0:00000001 prog=30000061:0
  97. [    1.619232] rpcrouter_create_server: 30000061:0
  98. [    1.619720] rpcrouter_create_server: rs30000061:00000000
  99. [    1.619842] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  100. [    1.619964] [RR] o NEW_SERVER id=0:00000001 prog=30000003:0
  101. [    1.620391] rpcrouter_create_server: 30000003:0
  102. [    1.620849] rpcrouter_create_server: rs30000003:00000000
  103. [    1.620941] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  104. [    1.621063] [RR] o NEW_SERVER id=0:00000001 prog=30000060:0
  105. [    1.621520] rpcrouter_create_server: 30000060:0
  106. [    1.621856] rpcrouter_create_server: rs30000060:00000000
  107. [    1.621948] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  108. [    1.622039] [RR] o NEW_SERVER id=0:00000001 prog=3000005f:0
  109. [    1.622375] rpcrouter_create_server: 3000005f:0
  110. [    1.622680] rpcrouter_create_server: rs3000005f:00000000
  111. [    1.622741] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  112. [    1.622863] [RR] o NEW_SERVER id=0:00000001 prog=30000021:0
  113. [    1.623168] rpcrouter_create_server: 30000021:0
  114. [    1.623474] rpcrouter_create_server: rs30000021:00000000
  115. [    1.623565] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  116. [    1.623657] [RR] o NEW_SERVER id=0:00000001 prog=30000002:0
  117. [    1.623962] rpcrouter_create_server: 30000002:0
  118. [    1.624389] rpcrouter_create_server: rs30000002:00000000
  119. [    1.624481] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  120. [    1.624603] [RR] o NEW_SERVER id=0:00000001 prog=3000fffe:0
  121. [    1.624908] rpcrouter_create_server: 3000fffe:0
  122. [    1.625244] rpcrouter_create_server: rs3000fffe:00000000
  123. [    1.625335] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  124. [    1.625427] [RR] o NEW_SERVER id=0:00000001 prog=3000001f:0
  125. [    1.625732] rpcrouter_create_server: 3000001f:0
  126. [    1.626068] rpcrouter_create_server: rs3000001f:00000000
  127. [    1.626159] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  128. [    1.626251] [RR] o NEW_SERVER id=0:00000001 prog=30000000:0
  129. [    1.626586] rpcrouter_create_server: 30000000:0
  130. [    1.626892] rpcrouter_create_server: rs30000000:00000000
  131. [    1.626983] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  132. [    1.627075] [RR] o NEW_SERVER id=0:00000001 prog=3000001d:0
  133. [    1.627380] rpcrouter_create_server: 3000001d:0
  134. [    1.627685] rpcrouter_create_server: rs3000001d:00000000
  135. [    1.627777] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  136. [    1.627868] [RR] o NEW_SERVER id=0:00000001 prog=3000005b:0
  137. [    1.628204] rpcrouter_create_server: 3000005b:0
  138. [    1.628479] rpcrouter_create_server: rs3000005b:00000000
  139. [    1.628570] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  140. [    1.628662] [RR] o NEW_SERVER id=0:00000001 prog=3000003c:0
  141. [    1.628997] rpcrouter_create_server: 3000003c:0
  142. [    1.629302] rpcrouter_create_server: rs3000003c:00000000
  143. [    1.629394] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  144. [    1.629486] [RR] o NEW_SERVER id=0:00000001 prog=3000003b:0
  145. [    1.629913] rpcrouter_create_server: 3000003b:0
  146. [    1.630249] rpcrouter_create_server: rs3000003b:00000000
  147. [    1.630310] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  148. [    1.630432] [RR] o NEW_SERVER id=0:00000001 prog=3000005a:0
  149. [    1.630798] rpcrouter_create_server: 3000005a:0
  150. [    1.631134] rpcrouter_create_server: rs3000005a:00000000
  151. [    1.631225] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  152. [    1.631317] [RR] o NEW_SERVER id=0:00000001 prog=30000059:0
  153. [    1.631652] rpcrouter_create_server: 30000059:0
  154. [    1.631958] rpcrouter_create_server: rs30000059:00000000
  155. [    1.632049] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  156. [    1.632141] [RR] o NEW_SERVER id=0:00000001 prog=3000001b:0
  157. [    1.632537] rpcrouter_create_server: 3000001b:0
  158. [    1.632873] rpcrouter_create_server: rs3000001b:00000000
  159. [    1.632934] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  160. [    1.633056] [RR] o NEW_SERVER id=0:00000001 prog=30000019:0
  161. [    1.633453] rpcrouter_create_server: 30000019:0
  162. [    1.633789] rpcrouter_create_server: rs30000019:00000000
  163. [    1.633880] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  164. [    1.633972] [RR] o NEW_SERVER id=0:00000001 prog=30000055:0
  165. [    1.634460] rpcrouter_create_server: 30000055:0
  166. [    1.634826] rpcrouter_create_server: rs30000055:00000000
  167. [    1.634918] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  168. [    1.635009] [RR] o NEW_SERVER id=0:00000001 prog=30000016:0
  169. [    1.635375] rpcrouter_create_server: 30000016:0
  170. [    1.635742] rpcrouter_create_server: rs30000016:00000000
  171. [    1.635803] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  172. [    1.635925] [RR] o NEW_SERVER id=0:00000001 prog=30000053:0
  173. [    1.636291] rpcrouter_create_server: 30000053:0
  174. [    1.636627] rpcrouter_create_server: rs30000053:00000000
  175. [    1.636718] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  176. [    1.636810] [RR] o NEW_SERVER id=0:00000001 prog=30000014:0
  177. [    1.637207] rpcrouter_create_server: 30000014:0
  178. [    1.637603] rpcrouter_create_server: rs30000014:00000000
  179. [    1.637695] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  180. [    1.637817] [RR] o NEW_SERVER id=0:00000001 prog=30000051:0
  181. [    1.638183] rpcrouter_create_server: 30000051:0
  182. [    1.638519] rpcrouter_create_server: rs30000051:00000000
  183. [    1.638610] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  184. [    1.638702] [RR] o NEW_SERVER id=0:00000001 prog=30000013:0
  185. [    1.639099] rpcrouter_create_server: 30000013:0
  186. [    1.639434] rpcrouter_create_server: rs30000013:00000000
  187. [    1.639526] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  188. [    1.639648] [RR] o NEW_SERVER id=0:00000001 prog=30000012:0
  189. [    1.640014] rpcrouter_create_server: 30000012:0
  190. [    1.640350] rpcrouter_create_server: rs30000012:00000000
  191. [    1.640441] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  192. [    1.640533] [RR] o NEW_SERVER id=0:00000001 prog=30000010:0
  193. [    1.640960] rpcrouter_create_server: 30000010:0
  194. [    1.641326] rpcrouter_create_server: rs30000010:00000000
  195. [    1.641418] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  196. [    1.641540] [RR] o NEW_SERVER id=0:00000001 prog=3000006c:0
  197. [    1.641967] rpcrouter_create_server: 3000006c:0
  198. [    1.642333] rpcrouter_create_server: rs3000006c:00000000
  199. [    1.642425] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  200. [    1.642547] [RR] o NEW_SERVER id=0:00000001 prog=3000000f:0
  201. [    1.642944] rpcrouter_create_server: 3000000f:0
  202. [    1.643280] rpcrouter_create_server: rs3000000f:00000000
  203. [    1.643371] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  204. [    1.643493] [RR] o NEW_SERVER id=0:00000001 prog=3000006b:0
  205. [    1.643890] rpcrouter_create_server: 3000006b:0
  206. [    1.644256] rpcrouter_create_server: rs3000006b:00000000
  207. [    1.644439] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  208. [    1.644561] [RR] o NEW_SERVER id=0:00000001 prog=3000000e:d10ca2da
  209. [    1.645050] rpcrouter_create_server: 3000000e:d10ca2da
  210. [    1.645446] rpcrouter_create_server: rs3000000e:d10ca2da
  211. [    1.645538] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  212. [    1.645660] [RR] o NEW_SERVER id=0:00000001 prog=3000006a:0
  213. [    1.646118] rpcrouter_create_server: 3000006a:0
  214. [    1.646484] rpcrouter_create_server: rs3000006a:00000000
  215. [    1.646575] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  216. [    1.646697] [RR] o NEW_SERVER id=0:00000001 prog=30000068:0
  217. [    1.647125] rpcrouter_create_server: 30000068:0
  218. [    1.647491] rpcrouter_create_server: rs30000068:00000000
  219. [    1.647583] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  220. [    1.647674] [RR] o NEW_SERVER id=0:00000001 prog=30000067:0
  221. [    1.648101] rpcrouter_create_server: 30000067:0
  222. [    1.648498] rpcrouter_create_server: rs30000067:00000000
  223. [    1.648590] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  224. [    1.648681] [RR] o NEW_SERVER id=0:00000001 prog=30000048:0
  225. [    1.649169] rpcrouter_create_server: 30000048:0
  226. [    1.649566] rpcrouter_create_server: rs30000048:00000000
  227. [    1.649658] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  228. [    1.649749] [RR] o NEW_SERVER id=0:00000001 prog=3000000a:0
  229. [    1.650207] rpcrouter_create_server: 3000000a:0
  230. [    1.650634] rpcrouter_create_server: rs3000000a:00000000
  231. [    1.650726] [RR] - ver=1 type=4 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
  232. [    1.650848] [RR] o NEW_SERVER id=0:00000001 prog=30000066:0
  233. [    1.651275] rpcrouter_create_server: 30000066:0
  234. [    1.651672] rpcrouter_create_server: rs30000066:00000000
  235. [    1.674438] [RR] o HELLO
  236. [    1.674530] [RR] x HELLO
  237. [    1.674560] [RR] send control message cmd=4 srv.cmd=4 prog=3000fffe:1 id=1:fadefade
  238. [    1.674652] [RR] x NEW_SERVER 3000fffe
  239. [    1.674713] [RR] x NEW_SERVER id=0:00000001 prog=30000025:0
  240. [    1.674774] [RR] send control message cmd=4 srv.cmd=4 prog=30000025:0 id=0:00000001
  241. [    1.674865] [RR] x NEW_SERVER id=0:00000001 prog=30000043:0
  242. [    1.674926] [RR] send control message cmd=4 srv.cmd=4 prog=30000043:0 id=0:00000001
  243. [    1.674987] [RR] x NEW_SERVER id=0:00000001 prog=30000005:0
  244. [    1.675048] [RR] send control message cmd=4 srv.cmd=4 prog=30000005:0 id=0:00000001
  245. [    1.675140] [RR] x NEW_SERVER id=0:00000001 prog=30000061:0
  246. [    1.675201] [RR] send control message cmd=4 srv.cmd=4 prog=30000061:0 id=0:00000001
  247. [    1.675292] [RR] x NEW_SERVER id=0:00000001 prog=30000003:0
  248. [    1.675354] [RR] send control message cmd=4 srv.cmd=4 prog=30000003:0 id=0:00000001
  249. [    1.675415] [RR] x NEW_SERVER id=0:00000001 prog=30000060:0
  250. [    1.675476] [RR] send control message cmd=4 srv.cmd=4 prog=30000060:0 id=0:00000001
  251. [    1.675567] [RR] x NEW_SERVER id=0:00000001 prog=3000005f:0
  252. [    1.675628] [RR] send control message cmd=4 srv.cmd=4 prog=3000005f:0 id=0:00000001
  253. [    1.675720] [RR] x NEW_SERVER id=0:00000001 prog=30000021:0
  254. [    1.675781] [RR] send control message cmd=4 srv.cmd=4 prog=30000021:0 id=0:00000001
  255. [    1.675842] [RR] x NEW_SERVER id=0:00000001 prog=30000002:0
  256. [    1.675903] [RR] send control message cmd=4 srv.cmd=4 prog=30000002:0 id=0:00000001
  257. [    1.675994] [RR] x NEW_SERVER id=0:00000001 prog=3000fffe:0
  258. [    1.676055] [RR] send control message cmd=4 srv.cmd=4 prog=3000fffe:0 id=0:00000001
  259. [    1.676116] [RR] x NEW_SERVER id=0:00000001 prog=3000001f:0
  260. [    1.676177] [RR] send control message cmd=4 srv.cmd=4 prog=3000001f:0 id=0:00000001
  261. [    1.676269] [RR] x NEW_SERVER id=0:00000001 prog=30000000:0
  262. [    1.676330] [RR] send control message cmd=4 srv.cmd=4 prog=30000000:0 id=0:00000001
  263. [    1.676422] [RR] x NEW_SERVER id=0:00000001 prog=3000001d:0
  264. [    1.676483] [RR] send control message cmd=4 srv.cmd=4 prog=3000001d:0 id=0:00000001
  265. [    1.676544] [RR] x NEW_SERVER id=0:00000001 prog=3000005b:0
  266. [    1.676605] [RR] send control message cmd=4 srv.cmd=4 prog=3000005b:0 id=0:00000001
  267. [    1.676696] [RR] x NEW_SERVER id=0:00000001 prog=3000003c:0
  268. [    1.676757] [RR] send control message cmd=4 srv.cmd=4 prog=3000003c:0 id=0:00000001
  269. [    1.676849] [RR] x NEW_SERVER id=0:00000001 prog=3000003b:0
  270. [    1.676910] [RR] send control message cmd=4 srv.cmd=4 prog=3000003b:0 id=0:00000001
  271. [    1.676971] [RR] x NEW_SERVER id=0:00000001 prog=3000005a:0
  272. [    1.677032] [RR] send control message cmd=4 srv.cmd=4 prog=3000005a:0 id=0:00000001
  273. [    1.677124] [RR] x NEW_SERVER id=0:00000001 prog=30000059:0
  274. [    1.677185] [RR] send control message cmd=4 srv.cmd=4 prog=30000059:0 id=0:00000001
  275. [    1.677246] [RR] x NEW_SERVER id=0:00000001 prog=3000001b:0
  276. [    1.677307] [RR] send control message cmd=4 srv.cmd=4 prog=3000001b:0 id=0:00000001
  277. [    1.677398] [RR] x NEW_SERVER id=0:00000001 prog=30000019:0
  278. [    1.677459] [RR] send control message cmd=4 srv.cmd=4 prog=30000019:0 id=0:00000001
  279. [    1.677551] [RR] x NEW_SERVER id=0:00000001 prog=30000055:0
  280. [    1.677612] [RR] send control message cmd=4 srv.cmd=4 prog=30000055:0 id=0:00000001
  281. [    1.677673] [RR] x NEW_SERVER id=0:00000001 prog=30000016:0
  282. [    1.677734] [RR] send control message cmd=4 srv.cmd=4 prog=30000016:0 id=0:00000001
  283. [    1.677825] [RR] x NEW_SERVER id=0:00000001 prog=30000053:0
  284. [    1.677886] [RR] send control message cmd=4 srv.cmd=4 prog=30000053:0 id=0:00000001
  285. [    1.677947] [RR] x NEW_SERVER id=0:00000001 prog=30000014:0
  286. [    1.678009] [RR] send control message cmd=4 srv.cmd=4 prog=30000014:0 id=0:00000001
  287. [    1.678100] [RR] x NEW_SERVER id=0:00000001 prog=30000051:0
  288. [    1.678161] [RR] send control message cmd=4 srv.cmd=4 prog=30000051:0 id=0:00000001
  289. [    1.678253] [RR] x NEW_SERVER id=0:00000001 prog=30000013:0
  290. [    1.678314] [RR] send control message cmd=4 srv.cmd=4 prog=30000013:0 id=0:00000001
  291. [    1.678375] [RR] x NEW_SERVER id=0:00000001 prog=30000012:0
  292. [    1.678436] [RR] send control message cmd=4 srv.cmd=4 prog=30000012:0 id=0:00000001
  293. [    1.678527] [RR] x NEW_SERVER id=0:00000001 prog=30000010:0
  294. [    1.678588] [RR] send control message cmd=4 srv.cmd=4 prog=30000010:0 id=0:00000001
  295. [    1.678680] [RR] x NEW_SERVER id=0:00000001 prog=3000006c:0
  296. [    1.678741] [RR] send control message cmd=4 srv.cmd=4 prog=3000006c:0 id=0:00000001
  297. [    1.678802] [RR] x NEW_SERVER id=0:00000001 prog=3000000f:0
  298. [    1.678863] [RR] send control message cmd=4 srv.cmd=4 prog=3000000f:0 id=0:00000001
  299. [    1.678955] [RR] x NEW_SERVER id=0:00000001 prog=3000006b:0
  300. [    1.679016] [RR] send control message cmd=4 srv.cmd=4 prog=3000006b:0 id=0:00000001
  301. [    1.679107] [RR] x NEW_SERVER id=0:00000001 prog=3000000e:d10ca2da
  302. [    1.679168] [RR] send control message cmd=4 srv.cmd=4 prog=3000000e:d10ca2da id=0:00000001
  303. [    1.679229] [RR] x NEW_SERVER id=0:00000001 prog=3000006a:0
  304. [    1.679290] [RR] send control message cmd=4 srv.cmd=4 prog=3000006a:0 id=0:00000001
  305. [    1.679382] [RR] x NEW_SERVER id=0:00000001 prog=30000068:0
  306. [    1.679443] [RR] send control message cmd=4 srv.cmd=4 prog=30000068:0 id=0:00000001
  307. [    1.679504] [RR] x NEW_SERVER id=0:00000001 prog=30000067:0
  308. [    1.679565] [RR] send control message cmd=4 srv.cmd=4 prog=30000067:0 id=0:00000001
  309. [    1.679656] [RR] x NEW_SERVER id=0:00000001 prog=30000048:0
  310. [    1.679718] [RR] send control message cmd=4 srv.cmd=4 prog=30000048:0 id=0:00000001
  311. [    1.679809] [RR] x NEW_SERVER id=0:00000001 prog=3000000a:0
  312. [    1.679870] [RR] send control message cmd=4 srv.cmd=4 prog=3000000a:0 id=0:00000001
  313. [    1.679931] [RR] x NEW_SERVER id=0:00000001 prog=30000066:0
  314. [    1.679992] [RR] send control message cmd=4 srv.cmd=4 prog=30000066:0 id=0:00000001
  315. [    1.784820] rpc_servers_init
  316. [    1.785156] Init amss parameters, found AMSS: 5225
  317. [    1.785278] -msm_rpc_create_server
  318. [    1.785736] [RR] x NEW_SERVER id=1:fadefade prog=3000000b:0
  319. [    1.785827] [RR] send control message cmd=4 srv.cmd=4 prog=3000000b:0 id=1:fadefade
  320. [    1.792053] hw3d: 0 init
  321. [    1.793151] raphnavi_tp: Registering Raphael NaviPad driver
  322. [    1.793518] htcraphael_init_panel: Initializing panel
  323. [    1.793579] htcraphael_init_panel: disabling raphael panel
  324. [    1.795440] ram_console: got buffer at 8e0000, size 20000
  325. [    1.795623] ram_console: found existing buffer, size 24771, start 24771
  326. [    1.797149] console [ram-1] enabled
  327. [    1.807128] Disabling Diamond Panel
  328. [    1.807189] htcblackstone_init_panel: Initializing panel
  329. [    1.807250] vreg_get: gp2 -> 21
  330. [    1.807312] vreg_get: gp4 -> 7
  331. [    1.807373] clock-wince: pc_clk_set_rate: id=7 rate=19200000
  332. [    1.808807] htctopaz_init_panel: Initializing panel
  333. [    1.808959] htctopaz_init_panel: panel does not apply to this device, aborted
  334. [    1.809539] BT RFK register
  335. [    1.809600] vreg_get: rftx -> 11
  336. [    1.809753] BT RFK probe
  337. [    1.809814]    bluetooth rfkill state   OFF
  338. [    1.809875] msm_gpio_set_function(13, 0)
  339. [    1.809936] msm_gpio_set_function(14, 0)
  340. [    1.809997] msm_gpio_set_function(15, 3)
  341. [    1.810028] msm_gpio_set_function(6c, 0)
  342. [    1.822937] [RPC] READ on ept d4848460
  343. [    1.824493] ashmem: initialized
  344. [    1.825653] squashfs: version 3.4 (2008/08/26) Phillip Lougher
  345. [    1.826568] io scheduler noop registered (default)
  346. [    1.826629] io scheduler anticipatory registered
  347. [    1.826690] io scheduler deadline registered
  348. [    1.826934] io scheduler cfq registered
  349. [    1.827972] mddi: init() base=0xd5004000 irq=16
  350. [    1.828247] htcblackstone_mddi_power_client(1)
  351. [    1.828552] mddi cmd send rtd: int 23a000, stat 808063, rtd val 10
  352. [    1.828704] get_smem_clock: state 10d09 clock 0
  353. [    1.829101] mddi: registering panel S1D13774
  354. [    1.829162] mddi: publish:
  355. [    1.830322] mddi_epson_probe
  356. [    1.830566] setup_vsync
  357. [    1.830810] vsync on gpio 97 now 1
  358. [    1.831970] msmfb_probe() installing 480 x 800 panel
  359. [    1.861358] Console: switching to colour frame buffer device 60x100
  360. [    1.921142] msm_serial: driver initialized
  361. [    1.921905] msm_serial_hs.1: ttyHS1 at MMIO 0xa0300000 (irq = 52) is a MSM HS UART
  362. [    1.923095] msm_serial_hs module loaded
  363. [    1.927062] loop: module loaded
  364. [    1.927673] pmem: 1 init
  365. [    1.930145] pmem_adsp: 0 init
  366. [    1.931915] pmem_gpu0: 0 init
  367. [    1.933258] pmem_camera: 0 init
  368. [    1.935485] logger: created 64K log 'log_main'
  369. [    1.936035] logger: created 256K log 'log_events'
  370. [    1.936523] logger: created 64K log 'log_radio'
  371. [    1.936859] PPP generic driver version 2.4.2
  372. [    1.937438] PPP Deflate Compression module registered
  373. [    1.937683] PPP BSD Compression module registered
  374. [    1.939056] allocated dma buffer at ffc0b000, dma_addr 24258000
  375. [    1.939483] read CFG0 = aa5400c0, CFG1 = 6746e
  376. [    1.939697] CFG0 = e85408c0, CFG1 = 4745e
  377. [    1.939849] CFG0: cw/page=3 ud_sz=516 ecc_sz=10 spare_sz=0 num_addr_cycles=5
  378. [    1.940093] NAND_READ_ID = 5590bc2c
  379. [    1.940338] status: e03020
  380. [    1.940460] nandid: 5590bc2c maker 2c device bc
  381. [    1.940643] CFG0: cw/page=3 ud_sz=512 ecc_sz=10 spare_sz=4
  382. [    1.940887] DEV_CMD1: f00f3000
  383. [    1.941040] <6>NAND_EBI2_ECC_BUF_CFG: 1ff
  384. [    1.941192] flash_id: 5590bc2c size 20000000
  385. [    1.942016] usb_probe() io=d5008000, irq=47, dma=ffc0c000(24259000)
  386. [    1.942871] hsusb: IDLE -> ONLINE
  387. [    1.943054] hsusb: reset controller
  388. [    1.995880] usb: notify offline
  389. [    1.996551] usb_function_register: adb
  390. [    1.997192] usb_function_register: usb_mass_storage
  391. [    1.998687] usb_try_to_bind: functions bound. starting.
  392. [    1.999114] usb: suspend
  393. [    1.999267] usb_bind_driver: ether
  394. [    1.999938] usb_mass_storage usb_mass_storage: Number of LUNs=1
  395. [    2.000244] usb_bind_driver: usb_mass_storage
  396. [    2.001403] usb_bind_driver: adb
  397. [    2.001647] usb_function_register: ether
  398. [    2.002136] mice: PS/2 mouse device common for all mice
  399. [    2.003509] input: gpio-keys as /class/input/input0
  400. [    2.058013] msm_ts: initing
  401. [    2.059478] input: MSM touchscreen as /class/input/input1
  402. [    2.118194] msm_ts: init successful
  403. [    2.118652] msm_vkeyb: init
  404. [    2.118896] msm_vkeyb: virtual keyboard is disabled by cmdline, not loading
  405. [    2.119354] msm_blackstone_pad: init
  406. [    2.120513] input: MSM Blackstone pad as /class/input/input2
  407. [    2.120941] usb: reset
  408. [    2.123016] usb: portchange USB_SPEED_HIGH
  409. [    2.168457] usb: reset
  410. [    2.170715] usb: portchange USB_SPEED_HIGH
  411. [    2.185974] msm_blackstone_pad: loaded
  412. [    2.200439] tssc_manager_init
  413. [    2.215515] tp_init_module():
  414. [    2.229919] TP_IOC_GETMFG=-2147188479
  415. [    2.229949]
  416. [    2.258789] misc_register(): OK
  417. [    2.275390] RTC probe
  418. [    2.291625] msm_rtc msm_rtc: rtc core: registered msm_rtc as rtc0
  419. [    2.320465] MSM RTC started
  420. [    2.335632] i2c /dev entries driver
  421. [    2.351470] microp-ksc: Registering MicroP-KEY driver
  422. [    2.366760] bma150: Registering Bosch BMA150 driver
  423. [    2.382202] microp-klt: Registering MicroP-LED driver
  424. [    2.397308] microp-klt: Initializing MicroP-LED chip driver at addr: 0x66
  425. [    2.428802] Registered led device: klt::home
  426. [    2.444244] Registered led device: klt::back
  427. [    2.459625] Registered led device: klt::end
  428. [    2.474822] Registered led device: klt::send
  429. [    2.489898] Registered led device: klt::action
  430. [    2.504943] Registered led device: lcd-backlight
  431. [    2.519866] Registered led device: button-backlight
  432. [    2.534301] microp-klt: Initialized MicroP-LED chip revision v060d
  433. [    2.563049] kionix-kxsd9: Registering Kionix KXSD9 driver
  434. [    2.577972] kionix-kxsd9: Initializing Kionix KXSD9 driver at addr: 0x19
  435. [    2.607818] input: kionix-kxsd9 as /class/input/input3
  436. [    2.653900] Bluetooth: HCI UART driver ver 2.2
  437. [    2.668823] Bluetooth: HCI H4 protocol initialized
  438. [    2.683532] Bluetooth: HCI BCSP protocol initialized
  439. [    2.698211] Bluetooth: HCILL protocol initialized
  440. [    2.713897] clock-wince: pc_clk_set_rate: id=19 rate=144000
  441. [    2.743682] htc_pwrsink_set:STUB!
  442. [    2.758605] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,0 dma 8
  443. [    2.788116] mmc0: 4 bit data mode enabled
  444. [    2.803131] mmc0: MMC clock 144000 -> 32000000 Hz, PCLK 64000000 Hz
  445. [    2.833038] mmc0: Slot eject status = 1
  446. [    2.848297] mmc0: Power save feature enable = 1
  447. [    2.863555] mmc0: DM non-cached buffer at ffc0e000, dma_addr 0x24282000
  448. [    2.893981] mmc0: DM cmd busaddr 0x24282000, cmdptr busaddr 0x24282300
  449. [    2.925231] clock-wince: pc_clk_set_rate: id=21 rate=144000
  450. [    2.957214] htc_pwrsink_set:STUB!
  451. [    2.972900] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,87 dma 8
  452. [    3.003753] mmc1: 4 bit data mode enabled
  453. [    3.019439] mmc1: MMC clock 144000 -> 32000000 Hz, PCLK 64000000 Hz
  454. [    3.050537] mmc1: Slot eject status = 0
  455. [    3.066223] mmc1: Power save feature enable = 1
  456. [    3.082031] mmc1: DM non-cached buffer at ffc0f000, dma_addr 0x24285000
  457. [    3.113281] mmc1: DM cmd busaddr 0x24285000, cmdptr busaddr 0x24285300
  458. [    3.147125] TCP cubic registered
  459. [    3.163360] NET: Registered protocol family 17
  460. [    3.179687] Bluetooth: L2CAP ver 2.11
  461. [    3.195831] Bluetooth: L2CAP socket layer initialized
  462. [    3.212066] Bluetooth: SCO (Voice Link) ver 0.6
  463. [    3.228210] Bluetooth: SCO socket layer initialized
  464. [    3.245056] Bluetooth: RFCOMM socket layer initialized
  465. [    3.253021] Bluetooth: RFCOMM TTY layer initialized
  466. [    3.260864] Bluetooth: RFCOMM ver 1.10
  467. [    3.268524] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  468. [    3.276184] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  469. [    3.291198] clock_late_init() disabled 16 unused clocks
  470. [    3.298950] GPS init
  471. [    3.307189] GPS rfkill init
  472. [    3.368865] HTC Battery Driver initialized
  473. [    3.377990] Registering MicroP keypad driver
  474. [    3.386657] msm_rtc msm_rtc: setting system clock to 2010-02-07 17:07:54 UTC (1265562474)
  475. [    3.404510] htc_pwrsink_set:STUB!
  476. [    3.414367] htc_pwrsink_set:STUB!
  477. [    3.424011] htc_pwrsink_set:STUB!
  478. [    3.433410] Freeing init memory: 120K
  479. [    3.442657] htc_pwrsink_set:STUB!
  480. [    3.450256] msm_i2c msm_i2c.0: error, status c8
  481. [    3.459960] htc_pwrsink_set:STUB!
  482. [    3.469604] htc_pwrsink_set:STUB!
  483. [    3.478302] msm_i2c msm_i2c.0: Error during data xfer (-5)
  484. [    3.494293] htc_pwrsink_set:STUB!
  485. [    3.502899] kionix-kxsd9: kxsd9_work: error -5
  486. [    3.511566] mmc1: Command timeout
  487. [    3.525268] mmc1: Command timeout
  488. [    3.538787] mmc1: Command timeout
  489. [    3.552185] mmc1: Command timeout
  490. [    3.566680] htc_pwrsink_set:STUB!
  491. [    3.574249] htc_pwrsink_set:STUB!
  492. [    3.592712] htc_pwrsink_set:STUB!
  493. [    3.637115] htc_pwrsink_set:STUB!
  494. [    3.686096] usb_mass_storage usb_mass_storage: config #1
  495. [    3.694061] htc_pwrsink_set:STUB!
  496. [    3.701507] clock-wince: pc_clk_set_rate: id=21 rate=32000000
  497. [    3.716033] htc_pwrsink_set:STUB!
  498. [    3.732543] htc_pwrsink_set:STUB!
  499. [    3.740112] mmc1: host does not support reading read-only switch. assuming write-enable.
  500. [    3.762237] mmc1: new high speed SDHC card at address 0002
  501. [    3.793151] mmcblk0: mmc1:0002 SD    4014080KiB
  502. [    3.801544]  mmcblk0: p1
  503. [   11.657073] usb_ether_open
  504. [   20.974731] ramzswap: disk size not provided. You can use disksize_kb module param to specify size.
  505. [   20.974761] Using default: (25% of RAM).
  506. [   20.996459] ramzswap: disk size set to 45660 kB
  507. [   29.837524] Adding 45652k swap on /dev/block/ramzswap0.  Priority:-1 extents:1 across:45652k
  508. [   29.976379] hsusb: ONLINE -> RESET
  509. [   29.984039] hsusb: reset controller
  510. [   30.052093] usb_ept_queue_xfer() tried to queue request while offline
  511. [   30.067138] usb: notify offline
  512. [   30.074798] hsusb: RESET -> ONLINE
  513. [   30.082275] usb: suspend
  514. [   30.091247] Something used micropklt_lcd_ctrl. This function should no longer be used.
  515. [   30.246948] usb: reset
  516. [   30.254669] usb: portchange USB_SPEED_HIGH
  517. [   30.292785] usb: reset
  518. [   30.295043] usb: portchange USB_SPEED_HIGH
  519. [   30.389251] usb_mass_storage usb_mass_storage: config #1
  520. [   30.734649] init: cannot open '/initlogo.rle'
  521. [   31.109832] init: cannot find '/setupmodem.sh', disabling 'setupmodem'
  522. [   32.103546] warning: `rild' uses 32-bit capabilities (legacy support in use)
  523. [   34.475616] Turnin mic bias on 1
  524. [   34.484313] snd_set_device 1 1 0
  525. [   34.492309] [RPC] CALL to 30000002:0 @ 0:00000001 (60 bytes)
  526. [   34.518035] [RPC] READ on ept d4215480
  527. [   34.526580] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d4215480
  528. [   34.543273] +rpcservers_probe
  529. [   34.551391] [RR] x NEW_SERVER id=1:d48b9ce0 prog=3000005d:0
  530. [   34.567108] [RPC] READ on ept d4215480 (24 bytes)
  531. [   34.576690] buggy program AudioCommandThr is calling snd_set_volume with dev=256 != 0xd
  532. [   34.602050] snd_set_volume 13 0 5
  533. [   34.610595] [RPC] CALL to 30000002:0 @ 0:00000001 (60 bytes)
  534. [   34.626556] [RPC] READ on ept d4215480
  535. [   34.637725] [RR] send control message cmd=4 srv.cmd=4 prog=3000005d:0 id=1:d48b9ce0
  536. [   34.656799] -rpc_server_register: 3000005d:00000000
  537. [   34.665191] -rpc_server_register_all
  538. [   34.677459] -rpcservers_probe
  539. [   34.685913] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d4215480
  540. [   34.704620] [RPC] READ on ept d4215480 (24 bytes)
  541. [  213.799468] request_suspend_state: wakeup (3->0) at 211290000000 (2010-02-07 17:11:23.010000000 UTC)
  542. [  213.820648] microp-klt: Setting lcd-backlight brightness to: 0x30
  543. [  216.288757] buggy program AudioCommandThr is calling snd_set_volume with dev=256 != 0xd
  544. [  216.288818] snd_set_volume 13 0 3
  545. [  216.288848] [RPC] CALL to 30000002:0 @ 0:00000001 (60 bytes)
  546. [  216.288909] [RPC] READ on ept d4215480
  547. [  216.290130] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d4215480
  548. [  216.290283] [RPC] READ on ept d4215480 (24 bytes)
  549. [  226.101623] Sound: 5
  550. [  226.101867] Turnin mic bias on 0
  551. [  226.101959] Turnin mic bias on 0
  552. [  226.102020] snd_set_device 1 1 1
  553. [  226.102081] [RPC] CALL to 30000002:0 @ 0:00000001 (60 bytes)
  554. [  226.102111] [RPC] READ on ept d4215480
  555. [  226.102874] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d4215480
  556. [  226.104492] [RPC] READ on ept d4215480 (24 bytes)
  557. [  234.613220] microp-klt: Setting lcd-backlight brightness to: 0x20
  558. [  234.633056] microp-klt: Setting lcd-backlight brightness to: 0x20
  559. [  234.653228] microp-klt: Setting lcd-backlight brightness to: 0x20
  560. [  234.673370] microp-klt: Setting lcd-backlight brightness to: 0x20
  561. [  234.703704] microp-klt: Setting lcd-backlight brightness to: 0x20
  562. [  234.723632] microp-klt: Setting lcd-backlight brightness to: 0x10
  563. [  234.743713] microp-klt: Setting lcd-backlight brightness to: 0x10
  564. [  234.763854] microp-klt: Setting lcd-backlight brightness to: 0x10
  565. [  234.783996] microp-klt: Setting lcd-backlight brightness to: 0x10
  566. [  234.804107] microp-klt: Setting lcd-backlight brightness to: 0x10
  567. [  234.824279] microp-klt: Setting lcd-backlight brightness to: 0x00
  568. [  234.844390] microp-klt: Setting lcd-backlight brightness to: 0x00
  569. [  234.864562] microp-klt: Setting lcd-backlight brightness to: 0x00
  570. [  234.884918] microp-klt: Setting lcd-backlight brightness to: 0x00
  571. [  234.904907] microp-klt: Setting lcd-backlight brightness to: 0x00
  572. [  234.925781] request_suspend_state: sleep (0->3) at 232170000000 (2010-02-07 17:11:43.890000000 UTC)
  573. [  234.925903] Sending arm9_low_speed 2
  574. [  234.925994] msmfb: panel sleeping
  575. [  234.956176] request_suspend_state: wakeup (3->0) at 232200000000 (2010-02-07 17:11:43.920000000 UTC)
  576. [  234.956878] epson_blank
  577. [  234.956909] init epson blank
  578. [  235.173126] microp-klt: Setting lcd-backlight brightness to: 0x00
  579. [  235.187805] microp-klt: Setting lcd-backlight brightness to: 0x00
  580. [  235.206787] microp-klt: Setting lcd-backlight brightness to: 0x00
  581. [  235.227111] microp-klt: Setting lcd-backlight brightness to: 0x00
  582. [  235.247161] microp-klt: Setting lcd-backlight brightness to: 0x10
  583. [  235.267272] microp-klt: Setting lcd-backlight brightness to: 0x10
  584. [  235.287445] microp-klt: Setting lcd-backlight brightness to: 0x10
  585. [  235.297454] blackstone panel deinit
  586. [  235.317474] microp-klt: Setting lcd-backlight brightness to: 0x10
  587. [  235.347808] microp-klt: Setting lcd-backlight brightness to: 0x10
  588. [  235.359375] epson_suspend
  589. [  235.368164] microp-klt: Setting lcd-backlight brightness to: 0x20
  590. [  235.398071] microp-klt: Setting lcd-backlight brightness to: 0x20
  591. [  235.418212] microp-klt: Setting lcd-backlight brightness to: 0x20
  592. [  235.438293] microp-klt: Setting lcd-backlight brightness to: 0x20
  593. [  235.458251] microp-klt: Setting lcd-backlight brightness to: 0x20
  594. [  235.478485] microp-klt: Setting lcd-backlight brightness to: 0x30
  595. [  239.708221] microp-klt: Setting lcd-backlight brightness to: 0x20
  596. [  239.728027] microp-klt: Setting lcd-backlight brightness to: 0x20
  597. [  239.748352] microp-klt: Setting lcd-backlight brightness to: 0x20
  598. [  239.838317] microp-klt: Setting lcd-backlight brightness to: 0x20
  599. [  239.888427] microp-klt: Setting lcd-backlight brightness to: 0x20
  600. [  239.908569] microp-klt: Setting lcd-backlight brightness to: 0x10
  601. [  239.928710] microp-klt: Setting lcd-backlight brightness to: 0x10
  602. [  239.948791] microp-klt: Setting lcd-backlight brightness to: 0x10
  603. [  239.968750] microp-klt: Setting lcd-backlight brightness to: 0x10
  604. [  239.988800] microp-klt: Setting lcd-backlight brightness to: 0x10
  605. [  240.008850] microp-klt: Setting lcd-backlight brightness to: 0x00
  606. [  240.028869] microp-klt: Setting lcd-backlight brightness to: 0x00
  607. [  240.048919] microp-klt: Setting lcd-backlight brightness to: 0x00
  608. [  240.069061] microp-klt: Setting lcd-backlight brightness to: 0x00
  609. [  240.089141] microp-klt: Setting lcd-backlight brightness to: 0x00
  610. [  240.109924] request_suspend_state: sleep (0->3) at 237260000000 (2010-02-07 17:11:48.980000000 UTC)
  611. [  240.426025] request_suspend_state: wakeup (3->0) at 237570000000 (2010-02-07 17:11:49.290000000 UTC)
  612. [  240.431793] microp-klt: Setting lcd-backlight brightness to: 0x00
  613. [  240.510711] microp-klt: Setting lcd-backlight brightness to: 0x00
  614. [  240.520355] epson_resume
  615. [  240.520416] msmfb: panel waking
  616. [  240.520446] msmfb: ready, waiting for full update
  617. [  240.520477] Sending arm9_low_speed 7
  618. [  240.525146] microp-klt: Setting lcd-backlight brightness to: 0x00
  619. [  240.542938] microp-klt: Setting lcd-backlight brightness to: 0x00
  620. [  240.582977] microp-klt: Setting lcd-backlight brightness to: 0x10
  621. [  240.603149] microp-klt: Setting lcd-backlight brightness to: 0x10
  622. [  240.633361] microp-klt: Setting lcd-backlight brightness to: 0x10
  623. [  240.653533] microp-klt: Setting lcd-backlight brightness to: 0x10
  624. [  240.673645] microp-klt: Setting lcd-backlight brightness to: 0x10
  625. [  240.693756] microp-klt: Setting lcd-backlight brightness to: 0x20
  626. [  240.724090] microp-klt: Setting lcd-backlight brightness to: 0x20
  627. [  240.745300] microp-klt: Setting lcd-backlight brightness to: 0x20
  628. [  240.764343] microp-klt: Setting lcd-backlight brightness to: 0x20
  629. [  240.794525] microp-klt: Setting lcd-backlight brightness to: 0x20
  630. [  240.814666] microp-klt: Setting lcd-backlight brightness to: 0x30
  631. [  242.412292] msmfb: full update starting
  632. [  242.465515] fake vsync
  633. [  242.465576] msmfb_start_dma 60.000 ms after vsync request
  634. [  242.496429] msmfb: full update completed
  635. [  242.496551] msmfb: turning on panel
  636. [  242.496612] epson_unblank
  637. [  242.496612] init epson panel
  638. [  242.496643] blackstone panel init
  639. [  244.495941] msmfb: panel awake
  640. [  248.745758] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
  641. [  249.200347] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
  642. [  249.625244] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
  643. [  249.878143] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
  644. [  249.907928] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
  645. [  255.984100] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
  646. [  256.281707] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
  647. [  256.634796] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
  648. [  256.782958] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
  649. [  256.845794] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
  650. [  257.348144] binder: release 1440:1440 transaction 7377 out, still active
  651. [  257.430145] binder: 1222:1369 transaction failed 29189, size 4-0
  652. [  257.430206] binder: send failed reply for transaction 7377, target dead
  653. [  267.264343] binder: 1222:1227 transaction failed 29189, size 52-0
  654. [  282.654052] microp-klt: Setting lcd-backlight brightness to: 0x20
  655. [  282.669952] microp-klt: Setting lcd-backlight brightness to: 0x20
  656. [  282.690093] microp-klt: Setting lcd-backlight brightness to: 0x20
  657. [  282.709960] microp-klt: Setting lcd-backlight brightness to: 0x20
  658. [  282.730163] microp-klt: Setting lcd-backlight brightness to: 0x20
  659. [  282.750122] microp-klt: Setting lcd-backlight brightness to: 0x10
  660. [  282.770324] microp-klt: Setting lcd-backlight brightness to: 0x10
  661. [  282.790466] microp-klt: Setting lcd-backlight brightness to: 0x10
  662. [  282.810882] microp-klt: Setting lcd-backlight brightness to: 0x10
  663. [  282.830993] microp-klt: Setting lcd-backlight brightness to: 0x10
  664. [  282.850891] microp-klt: Setting lcd-backlight brightness to: 0x00
  665. [  282.871032] microp-klt: Setting lcd-backlight brightness to: 0x00
  666. [  282.891082] microp-klt: Setting lcd-backlight brightness to: 0x00
  667. [  282.911193] microp-klt: Setting lcd-backlight brightness to: 0x00
  668. [  282.931304] microp-klt: Setting lcd-backlight brightness to: 0x00
  669. [  282.952148] request_suspend_state: sleep (0->3) at 279580000000 (2010-02-07 17:12:31.300000000 UTC)
  670. [  282.952301] Sending arm9_low_speed 2
  671. [  282.952392] msmfb: panel sleeping
  672. [  282.991149] epson_blank
  673. [  282.991210] init epson blank
  674. [  283.304107] blackstone panel deinit
  675. [  283.406219] epson_suspend
  676. [  285.064971] usb: suspend
  677. [  286.679107] usb: reset
  678. [  286.681365] usb: portchange USB_SPEED_HIGH
  679. [  286.723480] active wake lock PowerManagerService
  680. [  286.723541] active wake lock vbus_present
  681. [  286.723571] wake lock mmc_delayed_work, expired
  682. [  286.723571] wake lock SMD_DS, expired
  683. [  286.727996] usb: reset
  684. [  286.730224] usb: portchange USB_SPEED_HIGH
  685. [  286.822265] usb_mass_storage usb_mass_storage: config #1
  686. [  290.978912] request_suspend_state: wakeup (3->0) at 287510000000 (2010-02-07 17:12:39.230000000 UTC)
  687. [  290.981262] microp-klt: Setting lcd-backlight brightness to: 0x00
  688. [  290.981384] epson_resume
  689. [  290.981445] msmfb: panel waking
  690. [  290.981445] msmfb: ready, waiting for full update
  691. [  290.981475] Sending arm9_low_speed 7
  692. [  291.075408] msmfb: full update starting
  693. [  291.135223] fake vsync
  694. [  291.135253] msmfb_start_dma 60.000 ms after vsync request
  695. [  291.166076] msmfb: full update completed
  696. [  291.166259] msmfb: turning on panel
  697. [  291.166290] epson_unblank
  698. [  291.166290] init epson panel
  699. [  291.166320] blackstone panel init
  700. [  291.250671] microp-klt: Setting lcd-backlight brightness to: 0x00
  701. [  291.266387] microp-klt: Setting lcd-backlight brightness to: 0x00
  702. [  291.286437] microp-klt: Setting lcd-backlight brightness to: 0x00
  703. [  291.321105] microp-klt: Setting lcd-backlight brightness to: 0x10
  704. [  291.337738] microp-klt: Setting lcd-backlight brightness to: 0x10
  705. [  291.356842] microp-klt: Setting lcd-backlight brightness to: 0x10
  706. [  291.387969] microp-klt: Setting lcd-backlight brightness to: 0x10
  707. [  291.408874] microp-klt: Setting lcd-backlight brightness to: 0x10
  708. [  291.427459] microp-klt: Setting lcd-backlight brightness to: 0x20
  709. [  291.447418] microp-klt: Setting lcd-backlight brightness to: 0x20
  710. [  291.467834] microp-klt: Setting lcd-backlight brightness to: 0x20
  711. [  291.487792] microp-klt: Setting lcd-backlight brightness to: 0x20
  712. [  291.507934] microp-klt: Setting lcd-backlight brightness to: 0x20
  713. [  291.528015] microp-klt: Setting lcd-backlight brightness to: 0x30
  714. [  293.282226] msmfb: panel awake
  715. [  295.875396] mpd_ppp: img is of wrong format
  716. [  296.188476] mpd_ppp: img is of wrong format
  717. [  301.503509] microp-klt: Setting lcd-backlight brightness to: 0x20
  718. [  301.523376] microp-klt: Setting lcd-backlight brightness to: 0x20
  719. [  301.543334] microp-klt: Setting lcd-backlight brightness to: 0x20
  720. [  301.563415] microp-klt: Setting lcd-backlight brightness to: 0x20
  721. [  301.583709] microp-klt: Setting lcd-backlight brightness to: 0x20
  722. [  301.603820] microp-klt: Setting lcd-backlight brightness to: 0x10
  723. [  301.623931] microp-klt: Setting lcd-backlight brightness to: 0x10
  724. [  301.644134] microp-klt: Setting lcd-backlight brightness to: 0x10
  725. [  301.664276] microp-klt: Setting lcd-backlight brightness to: 0x10
  726. [  301.684326] microp-klt: Setting lcd-backlight brightness to: 0x10
  727. [  301.704406] microp-klt: Setting lcd-backlight brightness to: 0x00
  728. [  301.724548] microp-klt: Setting lcd-backlight brightness to: 0x00
  729. [  301.744750] microp-klt: Setting lcd-backlight brightness to: 0x00
  730. [  301.764892] microp-klt: Setting lcd-backlight brightness to: 0x00
  731. [  301.785003] microp-klt: Setting lcd-backlight brightness to: 0x00
  732. [  301.805847] request_suspend_state: sleep (0->3) at 298210000000 (2010-02-07 17:12:49.930000000 UTC)
  733. [  301.805969] Sending arm9_low_speed 2
  734. [  301.806091] msmfb: panel sleeping
  735. [  301.844970] epson_blank
  736. [  301.845031] init epson blank
  737. [  302.187194] blackstone panel deinit
  738. [  302.289642] epson_suspend
  739. [  303.003540] request_suspend_state: wakeup (3->0) at 299400000000 (2010-02-07 17:12:51.120000000 UTC)
  740. [  303.005706] microp-klt: Setting lcd-backlight brightness to: 0x00
  741. [  303.104949] microp-klt: Setting lcd-backlight brightness to: 0x00
  742. [  303.133605] microp-klt: Setting lcd-backlight brightness to: 0x00
  743. [  303.153289] microp-klt: Setting lcd-backlight brightness to: 0x00
  744. [  303.194793] microp-klt: Setting lcd-backlight brightness to: 0x10
  745. [  303.214630] microp-klt: Setting lcd-backlight brightness to: 0x10
  746. [  303.233734] microp-klt: Setting lcd-backlight brightness to: 0x10
  747. [  303.253906] microp-klt: Setting lcd-backlight brightness to: 0x10
  748. [  303.275634] microp-klt: Setting lcd-backlight brightness to: 0x10
  749. [  303.294128] microp-klt: Setting lcd-backlight brightness to: 0x20
  750. [  303.314086] microp-klt: Setting lcd-backlight brightness to: 0x20
  751. [  303.334320] microp-klt: Setting lcd-backlight brightness to: 0x20
  752. [  303.355194] microp-klt: Setting lcd-backlight brightness to: 0x20
  753. [  303.375244] microp-klt: Setting lcd-backlight brightness to: 0x20
  754. [  303.394927] microp-klt: Setting lcd-backlight brightness to: 0x30
  755. [  306.523559] epson_resume
  756. [  306.523620] msmfb: panel waking
  757. [  306.523620] msmfb: ready, waiting for full update
  758. [  306.523651] Sending arm9_low_speed 7
  759. [  307.116241] msmfb: full update starting
  760. [  307.176391] fake vsync
  761. [  307.176422] msmfb_start_dma 60.000 ms after vsync request
  762. [  307.207275] msmfb: full update completed
  763. [  307.207427] msmfb: turning on panel
  764. [  307.207458] epson_unblank
  765. [  307.207458] init epson panel
  766. [  307.207489] blackstone panel init
  767. [  309.220397] msmfb: panel awake
  768. [  334.705596] TIWLAN: Driver loading
  769. [  334.705749] trout_wifi_power: 1
  770. [  334.705780] msm_gpio_set_function(33, 7)
  771. [  334.705810] msm_gpio_set_function(34, 7)
  772. [  334.705810] msm_gpio_set_function(35, 7)
  773. [  334.705841] msm_gpio_set_function(36, 7)
  774. [  334.705871] msm_gpio_set_function(37, 7)
  775. [  334.705871] msm_gpio_set_function(38, 4)
  776. [  334.705902] msm_gpio_set_function(1d, 3)
  777. [  334.918823] htc_pwrsink_set:STUB!
  778. [  335.383728] trout_wifi_reset: 0
  779. [  335.484039] trout_wifi_set_carddetect: 1
  780. [  335.484069] mmc0: card_present 1
  781. [  335.484100] mmc0: Slot status change detected (0 -> 1)
  782. [  338.044921] htc_pwrsink_set:STUB!
  783. [  338.047119] htc_pwrsink_set:STUB!
  784. [  338.049774] htc_pwrsink_set:STUB!
  785. [  338.051727] mmc0: Command timeout
  786. [  338.057861] mmc0: card claims to support voltages below the defined range. These will be ignored.
  787. [  338.058013] mmc0: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.
  788. [  338.058135] htc_pwrsink_set:STUB!
  789. [  338.059997] htc_pwrsink_set:STUB!
  790. [  338.061035] clock-wince: pc_clk_set_rate: id=19 rate=11000000
  791. [  338.061126] htc_pwrsink_set:STUB!
  792. [  338.061279] htc_pwrsink_set:STUB!
  793. [  338.061401] mmc0: new SDIO card at address 0001
  794. [  338.065032] TIWLAN: Found SDIO controller (vendor 0x104c, device 0x9066)
  795. [  338.075775] TIWLAN: Driver initialized (rc 0)
  796. [  338.076416] TIWLAN: 1251 PG 1.2
  797. [  338.076507] TIWLAN: Driver loaded
  798. [  360.722290] microp-klt: Setting lcd-backlight brightness to: 0x20
  799. [  360.740875] microp-klt: Setting lcd-backlight brightness to: 0x20
  800. [  360.760894] microp-klt: Setting lcd-backlight brightness to: 0x20
  801. [  360.780975] microp-klt: Setting lcd-backlight brightness to: 0x20
  802. [  360.801147] microp-klt: Setting lcd-backlight brightness to: 0x20
  803. [  360.821411] microp-klt: Setting lcd-backlight brightness to: 0x10
  804. [  360.841827] microp-klt: Setting lcd-backlight brightness to: 0x10
  805. [  360.864227] microp-klt: Setting lcd-backlight brightness to: 0x10
  806. [  360.882812] microp-klt: Setting lcd-backlight brightness to: 0x10
  807. [  360.903259] microp-klt: Setting lcd-backlight brightness to: 0x10
  808. [  360.923828] microp-klt: Setting lcd-backlight brightness to: 0x00
  809. [  360.944396] microp-klt: Setting lcd-backlight brightness to: 0x00
  810. [  360.964874] microp-klt: Setting lcd-backlight brightness to: 0x00
  811. [  360.985351] microp-klt: Setting lcd-backlight brightness to: 0x00
  812. [  361.006439] microp-klt: Setting lcd-backlight brightness to: 0x00
  813. [  361.027557] request_suspend_state: sleep (0->3) at 356620000000 (2010-02-07 17:13:48.340000000 UTC)
  814. [  361.027770] Sending arm9_low_speed 2
  815. [  361.027923] msmfb: panel sleeping
  816. [  361.058959] epson_blank
  817. [  361.059082] init epson blank
  818. [  361.399078] blackstone panel deinit
  819. [  361.461120] epson_suspend
  820. [  362.415039] request_suspend_state: wakeup (3->0) at 358000000000 (2010-02-07 17:13:49.720000000 UTC)
  821. [  362.417236] microp-klt: Setting lcd-backlight brightness to: 0x00
  822. [  362.550018] microp-klt: Setting lcd-backlight brightness to: 0x00
  823. [  362.565887] microp-klt: Setting lcd-backlight brightness to: 0x00
  824. [  362.596008] microp-klt: Setting lcd-backlight brightness to: 0x00
  825. [  362.630828] microp-klt: Setting lcd-backlight brightness to: 0x10
  826. [  362.646484] microp-klt: Setting lcd-backlight brightness to: 0x10
  827. [  362.667510] microp-klt: Setting lcd-backlight brightness to: 0x10
  828. [  362.686798] microp-klt: Setting lcd-backlight brightness to: 0x10
  829. [  362.708435] microp-klt: Setting lcd-backlight brightness to: 0x10
  830. [  362.727081] microp-klt: Setting lcd-backlight brightness to: 0x20
  831. [  362.752410] microp-klt: Setting lcd-backlight brightness to: 0x20
  832. [  362.768188] microp-klt: Setting lcd-backlight brightness to: 0x20
  833. [  362.787445] microp-klt: Setting lcd-backlight brightness to: 0x20
  834. [  362.807464] microp-klt: Setting lcd-backlight brightness to: 0x20
  835. [  362.827575] microp-klt: Setting lcd-backlight brightness to: 0x30
  836. [  362.989044] epson_resume
  837. [  362.989105] msmfb: panel waking
  838. [  362.989135] msmfb: ready, waiting for full update
  839. [  362.989166] Sending arm9_low_speed 7
  840. [  363.468353] msmfb: full update starting
  841. [  363.525085] fake vsync
  842. [  363.525146] msmfb_start_dma 60.000 ms after vsync request
  843. [  363.555999] msmfb: full update completed
  844. [  363.556152] msmfb: turning on panel
  845. [  363.556182] epson_unblank
  846. [  363.556213] init epson panel
  847. [  363.556243] blackstone panel init
  848. [  365.595214] msmfb: panel awake
  849. [  406.432830] microp-klt: Setting lcd-backlight brightness to: 0x20
  850. [  406.445007] microp-klt: Setting lcd-backlight brightness to: 0x20
  851. [  406.464660] microp-klt: Setting lcd-backlight brightness to: 0x20
  852. [  406.484649] microp-klt: Setting lcd-backlight brightness to: 0x20
  853. [  406.522369] microp-klt: Setting lcd-backlight brightness to: 0x20
  854. [  406.534942] microp-klt: Setting lcd-backlight brightness to: 0x10
  855. [  406.555084] microp-klt: Setting lcd-backlight brightness to: 0x10
  856. [  406.575256] microp-klt: Setting lcd-backlight brightness to: 0x10
  857. [  406.595397] microp-klt: Setting lcd-backlight brightness to: 0x10
  858. [  406.615509] microp-klt: Setting lcd-backlight brightness to: 0x10
  859. [  406.637847] microp-klt: Setting lcd-backlight brightness to: 0x00
  860. [  406.656585] microp-klt: Setting lcd-backlight brightness to: 0x00
  861. [  406.676971] microp-klt: Setting lcd-backlight brightness to: 0x00
  862. [  406.697448] microp-klt: Setting lcd-backlight brightness to: 0x00
  863. [  406.717926] microp-klt: Setting lcd-backlight brightness to: 0x00
  864. [  406.746612] request_suspend_state: sleep (0->3) at 401700000000 (2010-02-07 17:14:33.420000000 UTC)
  865. [  406.746734] Sending arm9_low_speed 2
  866. [  406.746856] msmfb: panel sleeping
  867. [  406.788146] epson_blank
  868. [  406.788330] init epson blank
  869. [  407.100982] blackstone panel deinit
  870. [  407.163024] epson_suspend
  871. [  409.292358] request_suspend_state: wakeup (3->0) at 404190000000 (2010-02-07 17:14:35.910000000 UTC)
  872. [  409.294525] microp-klt: Setting lcd-backlight brightness to: 0x00
  873. [  409.379486] microp-klt: Setting lcd-backlight brightness to: 0x00
  874. [  409.409515] microp-klt: Setting lcd-backlight brightness to: 0x00
  875. [  409.446228] microp-klt: Setting lcd-backlight brightness to: 0x00
  876. [  409.470306] microp-klt: Setting lcd-backlight brightness to: 0x10
  877. [  409.491363] microp-klt: Setting lcd-backlight brightness to: 0x10
  878. [  409.520141] microp-klt: Setting lcd-backlight brightness to: 0x10
  879. [  409.541473] microp-klt: Setting lcd-backlight brightness to: 0x10
  880. [  409.561096] microp-klt: Setting lcd-backlight brightness to: 0x10
  881. [  409.583343] microp-klt: Setting lcd-backlight brightness to: 0x20
  882. [  409.601928] microp-klt: Setting lcd-backlight brightness to: 0x20
  883. [  409.622497] microp-klt: Setting lcd-backlight brightness to: 0x20
  884. [  409.652954] microp-klt: Setting lcd-backlight brightness to: 0x20
  885. [  409.672973] microp-klt: Setting lcd-backlight brightness to: 0x20
  886. [  409.693023] microp-klt: Setting lcd-backlight brightness to: 0x30
  887. [  411.509826] epson_resume
  888. [  411.509887] msmfb: panel waking
  889. [  411.509887] msmfb: ready, waiting for full update
  890. [  411.509918] Sending arm9_low_speed 7
  891. [  414.350646] microp-klt: Setting lcd-backlight brightness to: 0x20
  892. [  414.380706] microp-klt: Setting lcd-backlight brightness to: 0x20
  893. [  414.400909] microp-klt: Setting lcd-backlight brightness to: 0x20
  894. [  414.421051] microp-klt: Setting lcd-backlight brightness to: 0x20
  895. [  414.441131] microp-klt: Setting lcd-backlight brightness to: 0x20
  896. [  414.461273] microp-klt: Setting lcd-backlight brightness to: 0x10
  897. [  414.481384] microp-klt: Setting lcd-backlight brightness to: 0x10
  898. [  414.501464] microp-klt: Setting lcd-backlight brightness to: 0x10
  899. [  414.521636] microp-klt: Setting lcd-backlight brightness to: 0x10
  900. [  414.541839] microp-klt: Setting lcd-backlight brightness to: 0x10
  901. [  414.582092] microp-klt: Setting lcd-backlight brightness to: 0x00
  902. [  414.602203] microp-klt: Setting lcd-backlight brightness to: 0x00
  903. [  414.622314] microp-klt: Setting lcd-backlight brightness to: 0x00
  904. [  414.642486] microp-klt: Setting lcd-backlight brightness to: 0x00
  905. [  414.662536] microp-klt: Setting lcd-backlight brightness to: 0x00
  906. [  414.693481] request_suspend_state: sleep (0->3) at 409550000000 (2010-02-07 17:14:41.270000000 UTC)
  907. [  414.693634] Sending arm9_low_speed 2
  908. [  414.693725] msmfb: panel sleeping
  909. [  414.724670] epson_blank
  910. [  414.724731] init epson blank
  911. [  415.055114] blackstone panel deinit
  912. [  415.116973] epson_suspend
  913. [  415.639984] request_suspend_state: wakeup (3->0) at 410490000000 (2010-02-07 17:14:42.210000000 UTC)
  914. [  415.642181] microp-klt: Setting lcd-backlight brightness to: 0x00
  915. [  415.728942] microp-klt: Setting lcd-backlight brightness to: 0x00
  916. [  415.776916] microp-klt: Setting lcd-backlight brightness to: 0x00
  917. [  415.789337] microp-klt: Setting lcd-backlight brightness to: 0x00
  918. [  415.810241] microp-klt: Setting lcd-backlight brightness to: 0x10
  919. [  415.839721] microp-klt: Setting lcd-backlight brightness to: 0x10
  920. [  415.859863] microp-klt: Setting lcd-backlight brightness to: 0x10
  921. [  415.880004] microp-klt: Setting lcd-backlight brightness to: 0x10
  922. [  415.917114] microp-klt: Setting lcd-backlight brightness to: 0x10
  923. [  415.931243] microp-klt: Setting lcd-backlight brightness to: 0x20
  924. [  415.960784] microp-klt: Setting lcd-backlight brightness to: 0x20
  925. [  415.981262] microp-klt: Setting lcd-backlight brightness to: 0x20
  926. [  416.000793] microp-klt: Setting lcd-backlight brightness to: 0x20
  927. [  416.020996] microp-klt: Setting lcd-backlight brightness to: 0x20
  928. [  416.041137] microp-klt: Setting lcd-backlight brightness to: 0x30
  929. [  417.621337] epson_resume
  930. [  417.621398] msmfb: panel waking
  931. [  417.621398] msmfb: ready, waiting for full update
  932. [  417.621429] Sending arm9_low_speed 7
  933. [  418.665557] msmfb: full update starting
  934. [  418.723144] fake vsync
  935. [  418.723236] msmfb_start_dma 60.000 ms after vsync request
  936. [  418.754058] msmfb: full update completed
  937. [  418.754272] msmfb: turning on panel
  938. [  418.754302] epson_unblank
  939. [  418.754333] init epson panel
  940. [  418.754333] blackstone panel init
  941. [  420.767547] msmfb: panel awake
  942. [  424.010589] mpd_ppp: img is of wrong format
  943. [  424.174194] mpd_ppp: img is of wrong format
  944. [  434.195861] microp-klt: Setting lcd-backlight brightness to: 0x20
  945. [  434.215850] microp-klt: Setting lcd-backlight brightness to: 0x20
  946. [  434.235961] microp-klt: Setting lcd-backlight brightness to: 0x20
  947. [  434.255859] microp-klt: Setting lcd-backlight brightness to: 0x20
  948. [  434.276184] microp-klt: Setting lcd-backlight brightness to: 0x20
  949. [  434.296447] microp-klt: Setting lcd-backlight brightness to: 0x10
  950. [  434.316528] microp-klt: Setting lcd-backlight brightness to: 0x10
  951. [  434.336700] microp-klt: Setting lcd-backlight brightness to: 0x10
  952. [  434.356781] microp-klt: Setting lcd-backlight brightness to: 0x10
  953. [  434.382965] microp-klt: Setting lcd-backlight brightness to: 0x10
  954. [  434.427246] microp-klt: Setting lcd-backlight brightness to: 0x00
  955. [  434.447387] microp-klt: Setting lcd-backlight brightness to: 0x00
  956. [  434.467498] microp-klt: Setting lcd-backlight brightness to: 0x00
  957. [  434.487670] microp-klt: Setting lcd-backlight brightness to: 0x00
  958. [  434.507843] microp-klt: Setting lcd-backlight brightness to: 0x00
  959. [  434.528717] request_suspend_state: sleep (0->3) at 429160000000 (2010-02-07 17:15:00.880000000 UTC)
  960. [  434.528839] Sending arm9_low_speed 2
  961. [  434.528930] msmfb: panel sleeping
  962. [  434.565185] epson_blank
  963. [  434.565246] init epson blank
  964. [  434.930847] blackstone panel deinit
  965. [  434.992614] epson_suspend
  966. [  435.104034] active wake lock PowerManagerService
  967. [  435.104095] active wake lock vbus_present
  968. [  435.104125] wake lock mmc_delayed_work, expired
  969. [  435.104125] wake lock tiwlan_rx_wake, expired
  970. [  435.104156] active wake lock SMD_DS, time left 18
  971. [  436.171325] request_suspend_state: wakeup (3->0) at 430790000000 (2010-02-07 17:15:02.510000000 UTC)
  972. [  436.173583] microp-klt: Setting lcd-backlight brightness to: 0x00
  973. [  436.173736] epson_resume
  974. [  436.173767] msmfb: panel waking
  975. [  436.173797] msmfb: ready, waiting for full update
  976. [  436.173828] Sending arm9_low_speed 7
  977. [  436.432342] microp-klt: Setting lcd-backlight brightness to: 0x00
  978. [  436.453277] msmfb: full update starting
  979. [  436.483306] microp-klt: Setting lcd-backlight brightness to: 0x00
  980. [  436.501464] microp-klt: Setting lcd-backlight brightness to: 0x00
  981. [  436.510803] fake vsync
  982. [  436.510864] msmfb_start_dma 60.000 ms after vsync request
  983. [  436.523925] microp-klt: Setting lcd-backlight brightness to: 0x10
  984. [  436.541717] msmfb: full update completed
  985. [  436.541900] msmfb: turning on panel
  986. [  436.541961] epson_unblank
  987. [  436.541961] init epson panel
  988. [  436.541992] blackstone panel init
  989. [  436.542205] microp-klt: Setting lcd-backlight brightness to: 0x10
  990. [  436.565093] microp-klt: Setting lcd-backlight brightness to: 0x10
  991. [  436.592956] microp-klt: Setting lcd-backlight brightness to: 0x10
  992. [  436.622283] microp-klt: Setting lcd-backlight brightness to: 0x10
  993. [  436.646209] microp-klt: Setting lcd-backlight brightness to: 0x20
  994. [  436.662597] microp-klt: Setting lcd-backlight brightness to: 0x20
  995. [  436.682617] microp-klt: Setting lcd-backlight brightness to: 0x20
  996. [  436.702758] microp-klt: Setting lcd-backlight brightness to: 0x20
  997. [  436.722961] microp-klt: Setting lcd-backlight brightness to: 0x20
  998. [  436.745147] microp-klt: Setting lcd-backlight brightness to: 0x30
  999. [  438.610412] msmfb: panel awake
  1000. [  440.353607] microp-klt: Setting lcd-backlight brightness to: 0x20
  1001. [  440.373474] microp-klt: Setting lcd-backlight brightness to: 0x20
  1002. [  440.393463] microp-klt: Setting lcd-backlight brightness to: 0x20
  1003. [  440.413604] microp-klt: Setting lcd-backlight brightness to: 0x20
  1004. [  440.433685] microp-klt: Setting lcd-backlight brightness to: 0x20
  1005. [  440.453826] microp-klt: Setting lcd-backlight brightness to: 0x10
  1006. [  440.473724] microp-klt: Setting lcd-backlight brightness to: 0x10
  1007. [  440.494140] microp-klt: Setting lcd-backlight brightness to: 0x10
  1008. [  440.514190] microp-klt: Setting lcd-backlight brightness to: 0x10
  1009. [  440.534332] microp-klt: Setting lcd-backlight brightness to: 0x10
  1010. [  440.554473] microp-klt: Setting lcd-backlight brightness to: 0x00
  1011. [  440.574615] microp-klt: Setting lcd-backlight brightness to: 0x00
  1012. [  440.594787] microp-klt: Setting lcd-backlight brightness to: 0x00
  1013. [  440.614898] microp-klt: Setting lcd-backlight brightness to: 0x00
  1014. [  440.635101] microp-klt: Setting lcd-backlight brightness to: 0x00
  1015. [  440.655883] request_suspend_state: sleep (0->3) at 435170000000 (2010-02-07 17:15:06.890000000 UTC)
  1016. [  440.656005] Sending arm9_low_speed 2
  1017. [  440.656127] msmfb: panel sleeping
  1018. [  440.687042] epson_blank
  1019. [  440.687103] init epson blank
  1020. [  440.977203] blackstone panel deinit
  1021. [  441.039245] epson_suspend
  1022. [  442.175018] active wake lock PowerManagerService
  1023. [  442.175079] active wake lock vbus_present
  1024. [  442.175109] wake lock mmc_delayed_work, expired
  1025. [  442.175140] wake lock tiwlan_rx_wake, expired
  1026. [  442.175170] wake lock SMD_DS, expired
  1027. [  442.271545] request_suspend_state: wakeup (3->0) at 436770000000 (2010-02-07 17:15:08.490000000 UTC)
  1028. [  442.272399] epson_resume
  1029. [  442.272430] msmfb: panel waking
  1030. [  442.272460] msmfb: ready, waiting for full update
  1031. [  442.272491] Sending arm9_low_speed 7
  1032. [  442.274505] microp-klt: Setting lcd-backlight brightness to: 0x00
  1033. [  442.418090] microp-klt: Setting lcd-backlight brightness to: 0x00
  1034. [  442.439971] microp-klt: Setting lcd-backlight brightness to: 0x00
  1035. [  442.440521] msmfb: full update starting
  1036. [  442.454193] microp-klt: Setting lcd-backlight brightness to: 0x00
  1037. [  442.474304] microp-klt: Setting lcd-backlight brightness to: 0x10
  1038. [  442.493194] fake vsync
  1039. [  442.493255] msmfb_start_dma 60.000 ms after vsync request
  1040. [  442.494903] microp-klt: Setting lcd-backlight brightness to: 0x10
  1041. [  442.514038] microp-klt: Setting lcd-backlight brightness to: 0x10
  1042. [  442.524108] msmfb: full update completed
  1043. [  442.524291] msmfb: turning on panel
  1044. [  442.524353] epson_unblank
  1045. [  442.524353] init epson panel
  1046. [  442.524383] blackstone panel init
  1047. [  442.541137] microp-klt: Setting lcd-backlight brightness to: 0x10
  1048. [  442.555145] microp-klt: Setting lcd-backlight brightness to: 0x10
  1049. [  442.574279] microp-klt: Setting lcd-backlight brightness to: 0x20
  1050. [  442.594238] microp-klt: Setting lcd-backlight brightness to: 0x20
  1051. [  442.625518] microp-klt: Setting lcd-backlight brightness to: 0x20
  1052. [  442.644653] microp-klt: Setting lcd-backlight brightness to: 0x20
  1053. [  442.666198] microp-klt: Setting lcd-backlight brightness to: 0x20
  1054. [  442.684936] microp-klt: Setting lcd-backlight brightness to: 0x30
  1055. [  444.626953] msmfb: panel awake
  1056. [  448.426818] microp-klt: Setting lcd-backlight brightness to: 0x20
  1057. [  448.446716] microp-klt: Setting lcd-backlight brightness to: 0x20
  1058. [  448.466644] microp-klt: Setting lcd-backlight brightness to: 0x20
  1059. [  448.486816] microp-klt: Setting lcd-backlight brightness to: 0x20
  1060. [  448.506805] microp-klt: Setting lcd-backlight brightness to: 0x20
  1061. [  448.527008] microp-klt: Setting lcd-backlight brightness to: 0x10
  1062. [  448.557220] microp-klt: Setting lcd-backlight brightness to: 0x10
  1063. [  448.597503] microp-klt: Setting lcd-backlight brightness to: 0x10
  1064. [  448.627807] microp-klt: Setting lcd-backlight brightness to: 0x10
  1065. [  448.668090] microp-klt: Setting lcd-backlight brightness to: 0x10
  1066. [  448.688262] microp-klt: Setting lcd-backlight brightness to: 0x00
  1067. [  448.824829] microp-klt: Setting lcd-backlight brightness to: 0x00
  1068. [  448.864379] microp-klt: Setting lcd-backlight brightness to: 0x00
  1069. [  448.894622] microp-klt: Setting lcd-backlight brightness to: 0x00
  1070. [  448.954559] microp-klt: Setting lcd-backlight brightness to: 0x00
  1071. [  448.975921] request_suspend_state: sleep (0->3) at 443390000000 (2010-02-07 17:15:15.110000000 UTC)
  1072. [  448.976074] Sending arm9_low_speed 2
  1073. [  448.976165] msmfb: panel sleeping
  1074. [  449.007110] epson_blank
  1075. [  449.007171] init epson blank
  1076. [  449.347534] blackstone panel deinit
  1077. [  449.409515] epson_suspend
  1078. [  451.357116] request_suspend_state: wakeup (3->0) at 445750000000 (2010-02-07 17:15:17.470000000 UTC)
  1079. [  451.359405] microp-klt: Setting lcd-backlight brightness to: 0x00
  1080. [  451.500305] microp-klt: Setting lcd-backlight brightness to: 0x00
  1081. [  451.521972] microp-klt: Setting lcd-backlight brightness to: 0x00
  1082. [  451.540527] microp-klt: Setting lcd-backlight brightness to: 0x00
  1083. [  451.579956] microp-klt: Setting lcd-backlight brightness to: 0x10
  1084. [  451.601684] microp-klt: Setting lcd-backlight brightness to: 0x10
  1085. [  451.621093] microp-klt: Setting lcd-backlight brightness to: 0x10
  1086. [  451.643188] microp-klt: Setting lcd-backlight brightness to: 0x10
  1087. [  451.662506] microp-klt: Setting lcd-backlight brightness to: 0x10
  1088. [  451.682739] microp-klt: Setting lcd-backlight brightness to: 0x20
  1089. [  451.701477] microp-klt: Setting lcd-backlight brightness to: 0x20
  1090. [  451.721557] microp-klt: Setting lcd-backlight brightness to: 0x20
  1091. [  451.741638] microp-klt: Setting lcd-backlight brightness to: 0x20
  1092. [  451.761749] microp-klt: Setting lcd-backlight brightness to: 0x20
  1093. [  451.782592] microp-klt: Setting lcd-backlight brightness to: 0x30
  1094. [  452.678100] epson_resume
  1095. [  452.678161] msmfb: panel waking
  1096. [  452.678192] msmfb: ready, waiting for full update
  1097. [  452.678222] Sending arm9_low_speed 7
  1098. [  456.404022] microp-klt: Setting lcd-backlight brightness to: 0x20
  1099. [  456.423217] microp-klt: Setting lcd-backlight brightness to: 0x20
  1100. [  456.451690] microp-klt: Setting lcd-backlight brightness to: 0x20
  1101. [  456.502502] microp-klt: Setting lcd-backlight brightness to: 0x20
  1102. [  456.522674] microp-klt: Setting lcd-backlight brightness to: 0x20
  1103. [  456.562927] microp-klt: Setting lcd-backlight brightness to: 0x10
  1104. [  456.583129] microp-klt: Setting lcd-backlight brightness to: 0x10
  1105. [  456.634338] microp-klt: Setting lcd-backlight brightness to: 0x10
  1106. [  456.653594] microp-klt: Setting lcd-backlight brightness to: 0x10
  1107. [  456.726013] microp-klt: Setting lcd-backlight brightness to: 0x10
  1108. [  456.754333] microp-klt: Setting lcd-backlight brightness to: 0x00
  1109. [  456.774444] microp-klt: Setting lcd-backlight brightness to: 0x00
  1110. [  456.794555] microp-klt: Setting lcd-backlight brightness to: 0x00
  1111. [  456.814697] microp-klt: Setting lcd-backlight brightness to: 0x00
  1112. [  456.834808] microp-klt: Setting lcd-backlight brightness to: 0x00
  1113. [  456.865722] request_suspend_state: sleep (0->3) at 451230000000 (2010-02-07 17:15:22.950000000 UTC)
  1114. [  456.865875] Sending arm9_low_speed 2
  1115. [  456.865966] msmfb: panel sleeping
  1116. [  456.905303] epson_blank
  1117. [  456.905364] init epson blank
  1118. [  457.247375] blackstone panel deinit
  1119. [  457.347930] epson_suspend
  1120. [  459.473297] active wake lock PowerManagerService
  1121. [  459.473327] active wake lock vbus_present
  1122. [  459.473327] wake lock mmc_delayed_work, expired
  1123. [  459.473358] wake lock SMD_DS, expired
  1124. [  459.473358] wake lock tiwlan_rx_wake, expired
  1125. [  541.578094] request_suspend_state: wakeup (3->0) at 534770000000 (2010-02-07 17:16:46.490000000 UTC)
  1126. [  541.580352] microp-klt: Setting lcd-backlight brightness to: 0x00
  1127. [  541.580474] epson_resume
  1128. [  541.580505] msmfb: panel waking
  1129. [  541.580535] msmfb: ready, waiting for full update
  1130. [  541.580566] Sending arm9_low_speed 7
  1131. [  541.697479] microp-klt: Setting lcd-backlight brightness to: 0x00
  1132. [  541.718353] microp-klt: Setting lcd-backlight brightness to: 0x00
  1133. [  541.727233] msmfb: full update starting
  1134. [  541.739654] microp-klt: Setting lcd-backlight brightness to: 0x00
  1135. [  541.775085] microp-klt: Setting lcd-backlight brightness to: 0x10
  1136. [  541.787689] fake vsync
  1137. [  541.787750] msmfb_start_dma 60.000 ms after vsync request
  1138. [  541.806365] microp-klt: Setting lcd-backlight brightness to: 0x10
  1139. [  541.818603] msmfb: full update completed
  1140. [  541.818969] msmfb: turning on panel
  1141. [  541.819030] epson_unblank
  1142. [  541.819030] init epson panel
  1143. [  541.819030] blackstone panel init
  1144. [  541.824523] microp-klt: Setting lcd-backlight brightness to: 0x10
  1145. [  541.839294] microp-klt: Setting lcd-backlight brightness to: 0x10
  1146. [  541.871582] microp-klt: Setting lcd-backlight brightness to: 0x10
  1147. [  541.899688] microp-klt: Setting lcd-backlight brightness to: 0x20
  1148. [  541.919952] microp-klt: Setting lcd-backlight brightness to: 0x20
  1149. [  541.940460] microp-klt: Setting lcd-backlight brightness to: 0x20
  1150. [  541.960906] microp-klt: Setting lcd-backlight brightness to: 0x20
  1151. [  541.981262] microp-klt: Setting lcd-backlight brightness to: 0x20
  1152. [  542.002227] microp-klt: Setting lcd-backlight brightness to: 0x30
  1153. [  543.560241] msm_i2c msm_i2c.0: error, status 21d0
  1154. [  545.566680] msm_i2c msm_i2c.0: Error waiting for notbusy
  1155. [  545.566802] msm_i2c msm_i2c.0: Error during data xfer (-5)
  1156. [  545.566925] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1157. [  545.567199] micropklt_read: error while reading data at address 66,33: -5
  1158. [  546.795471] msmfb_pan_display timeout waiting for frame start, 1 1
  1159. [  547.595214] msm_i2c msm_i2c.0: Error waiting for notbusy
  1160. [  547.595336] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1161. [  547.595458] Couldn't send ch id 70
  1162. [  549.610748] msm_i2c msm_i2c.0: Error waiting for notbusy
  1163. [  549.610870] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1164. [  549.610931] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1165. [  551.626617] msm_i2c msm_i2c.0: Error waiting for notbusy
  1166. [  551.626739] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1167. [  551.626800] micropklt_read: error while asking for data address 66,33: -16
  1168. [  553.970062] msm_i2c msm_i2c.0: Error waiting for notbusy
  1169. [  553.970184] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1170. [  553.970336] Couldn't send ch id 70
  1171. [  556.095916] msm_i2c msm_i2c.0: Error waiting for notbusy
  1172. [  556.096099] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1173. [  556.096343] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1174. [  558.141754] msm_i2c msm_i2c.0: Error waiting for notbusy
  1175. [  558.141937] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1176. [  558.141998] Couldn't send ch id 70
  1177. [  560.178497] msm_i2c msm_i2c.0: Error waiting for notbusy
  1178. [  560.178680] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1179. [  560.178741] Couldn't send ch id 70
  1180. [  560.449645] msmfb_pan_display timeout waiting for frame start, 1 1
  1181. [  562.267333] msm_i2c msm_i2c.0: Error waiting for notbusy
  1182. [  562.267486] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1183. [  562.267791] Couldn't send ch id 70
  1184. [  564.260589] msm_i2c msm_i2c.0: Error waiting for notbusy
  1185. [  564.260681] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1186. [  564.260833] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1187. [  565.639404] msmfb_pan_display timeout waiting for frame start, 1 1
  1188. [  566.302032] msm_i2c msm_i2c.0: Error waiting for notbusy
  1189. [  566.302246] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1190. [  566.302368] Couldn't send ch id 40
  1191. [  568.300811] msm_i2c msm_i2c.0: Error waiting for notbusy
  1192. [  568.300994] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1193. [  568.301300] micropklt_read: error while asking for data address 66,33: -16
  1194. [  568.301452] microp-klt: Setting lcd-backlight brightness to: 0x20
  1195. [  570.295806] msm_i2c msm_i2c.0: Error waiting for notbusy
  1196. [  570.295928] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1197. [  570.296081] Couldn't send ch id 70
  1198. [  572.289184] msm_i2c msm_i2c.0: Error waiting for notbusy
  1199. [  572.289367] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1200. [  572.289672] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1201. [  574.354400] msm_i2c msm_i2c.0: Error waiting for notbusy
  1202. [  574.354614] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1203. [  574.354736] Couldn't send ch id 22
  1204. [  574.375488] microp-klt: Setting lcd-backlight brightness to: 0x20
  1205. [  576.342773] msm_i2c msm_i2c.0: Error waiting for notbusy
  1206. [  576.342987] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1207. [  576.343231] Couldn't send ch id 70
  1208. [  578.330841] msm_i2c msm_i2c.0: Error waiting for notbusy
  1209. [  578.331054] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1210. [  578.331359] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1211. [  580.319274] msm_i2c msm_i2c.0: Error waiting for notbusy
  1212. [  580.319488] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1213. [  580.319610] Couldn't send ch id 22
  1214. [  582.355377] msm_i2c msm_i2c.0: Error waiting for notbusy
  1215. [  582.355499] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1216. [  582.355651] Couldn't send ch id 70
  1217. [  584.346771] msm_i2c msm_i2c.0: Error waiting for notbusy
  1218. [  584.346984] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1219. [  584.347290] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1220. [  586.399108] msm_i2c msm_i2c.0: Error waiting for notbusy
  1221. [  586.399322] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1222. [  586.399597] Couldn't send ch id 40
  1223. [  586.401977] request_suspend_state: wakeup (0->0) at 579020000000 (2010-02-07 17:17:30.740000000 UTC)
  1224. [  588.387329] msm_i2c msm_i2c.0: Error waiting for notbusy
  1225. [  588.387542] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1226. [  588.387664] Couldn't send ch id 70
  1227. [  590.375579] msm_i2c msm_i2c.0: Error waiting for notbusy
  1228. [  590.375793] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1229. [  590.376068] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1230. [  592.370513] msm_i2c msm_i2c.0: Error waiting for notbusy
  1231. [  592.370727] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1232. [  592.371032] micropklt_read: error while asking for data address 66,33: -16
  1233. [  592.371185] microp-klt: Setting lcd-backlight brightness to: 0x20
  1234. [  594.358642] msm_i2c msm_i2c.0: Error waiting for notbusy
  1235. [  594.358856] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1236. [  594.359130] Couldn't send ch id 70
  1237. [  596.357055] msm_i2c msm_i2c.0: Error waiting for notbusy
  1238. [  596.357269] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1239. [  596.357574] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1240. [  598.400726] msm_i2c msm_i2c.0: Error waiting for notbusy
  1241. [  598.400909] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1242. [  598.401062] Couldn't send ch id 22
  1243. [  600.389007] msm_i2c msm_i2c.0: Error waiting for notbusy
  1244. [  600.389221] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1245. [  600.389495] Couldn't send ch id 70
  1246. [  600.419189] msmfb: panel awake
  1247. [  602.377410] msm_i2c msm_i2c.0: Error waiting for notbusy
  1248. [  602.377624] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1249. [  602.377929] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1250. [  604.416259] msm_i2c msm_i2c.0: Error waiting for notbusy
  1251. [  604.416473] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1252. [  604.416625] Couldn't send ch id 40
  1253. [  604.457519] microp-klt: Setting lcd-backlight brightness to: 0x20
  1254. [  606.455596] msm_i2c msm_i2c.0: Error waiting for notbusy
  1255. [  606.455688] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1256. [  606.455871] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1257. [  608.450897] msm_i2c msm_i2c.0: Error waiting for notbusy
  1258. [  608.451110] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1259. [  608.451232] Couldn't send ch id 22
  1260. [  608.471984] microp-klt: Setting lcd-backlight brightness to: 0x20
  1261. [  610.438995] msm_i2c msm_i2c.0: Error waiting for notbusy
  1262. [  610.439208] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1263. [  610.439361] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1264. [  612.437744] msm_i2c msm_i2c.0: Error waiting for notbusy
  1265. [  612.437927] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1266. [  612.438049] Couldn't send ch id 22
  1267. [  614.430358] msm_i2c msm_i2c.0: Error waiting for notbusy
  1268. [  614.430572] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1269. [  614.430877] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1270. [  616.471923] msm_i2c msm_i2c.0: Error waiting for notbusy
  1271. [  616.472137] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1272. [  616.472259] Couldn't send ch id 40
  1273. [  616.476043] request_suspend_state: wakeup (0->0) at 608780000000 (2010-02-07 17:18:00.500000000 UTC)
  1274. [  616.483032] microp-klt: Setting lcd-backlight brightness to: 0x20
  1275. [  618.498565] msm_i2c msm_i2c.0: Error waiting for notbusy
  1276. [  618.498657] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1277. [  618.498840] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1278. [  620.490386] msm_i2c msm_i2c.0: Error waiting for notbusy
  1279. [  620.490600] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1280. [  620.490722] Couldn't send ch id 22
  1281. [  620.744903] microp-klt: Setting lcd-backlight brightness to: 0x20
  1282. [  622.507659] msm_i2c msm_i2c.0: Error waiting for notbusy
  1283. [  622.507843] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1284. [  622.508178] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1285. [  624.552276] msm_i2c msm_i2c.0: Error waiting for notbusy
  1286. [  624.552490] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1287. [  624.552612] Couldn't send ch id 22
  1288. [  624.596862] microp-klt: Setting lcd-backlight brightness to: 0x30
  1289. [  626.540679] msm_i2c msm_i2c.0: Error waiting for notbusy
  1290. [  626.540863] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1291. [  626.541168] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1292. [  628.536315] msm_i2c msm_i2c.0: Error waiting for notbusy
  1293. [  628.536437] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1294. [  628.536499] Couldn't send ch id 22
  1295. [  630.554779] msm_i2c msm_i2c.0: Error waiting for notbusy
  1296. [  630.554901] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1297. [  630.554931] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1298. [  632.770690] msm_i2c msm_i2c.0: Error waiting for notbusy
  1299. [  632.770812] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1300. [  632.770874] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1301. [  635.035064] msm_i2c msm_i2c.0: Error waiting for notbusy
  1302. [  635.035186] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1303. [  635.035339] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1304. [  637.028991] msm_i2c msm_i2c.0: Error waiting for notbusy
  1305. [  637.029205] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1306. [  637.029327] Couldn't send ch id 40
  1307. [  637.030914] microp-klt: Setting lcd-backlight brightness to: 0x20
  1308. [  639.025817] msm_i2c msm_i2c.0: Error waiting for notbusy
  1309. [  639.026031] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1310. [  639.026153] Couldn't send ch id 22
  1311. [  639.046844] microp-klt: Setting lcd-backlight brightness to: 0x20
  1312. [  641.014068] msm_i2c msm_i2c.0: Error waiting for notbusy
  1313. [  641.014251] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1314. [  641.014404] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1315. [  643.002197] msm_i2c msm_i2c.0: Error waiting for notbusy
  1316. [  643.002380] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1317. [  643.002502] Couldn't send ch id 22
  1318. [  643.023223] microp-klt: Setting lcd-backlight brightness to: 0x20
  1319. [  645.024017] msm_i2c msm_i2c.0: Error waiting for notbusy
  1320. [  645.024230] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1321. [  645.024536] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1322. [  647.066345] msm_i2c msm_i2c.0: Error waiting for notbusy
  1323. [  647.066528] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1324. [  647.066650] Couldn't send ch id 22
  1325. [  647.087402] microp-klt: Setting lcd-backlight brightness to: 0x20
  1326. [  649.054870] msm_i2c msm_i2c.0: Error waiting for notbusy
  1327. [  649.055084] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1328. [  649.055389] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1329. [  651.042938] msm_i2c msm_i2c.0: Error waiting for notbusy
  1330. [  651.043151] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1331. [  651.043273] Couldn't send ch id 22
  1332. [  651.080383] microp-klt: Setting lcd-backlight brightness to: 0x20
  1333. [  653.069030] msm_i2c msm_i2c.0: Error waiting for notbusy
  1334. [  653.069152] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1335. [  653.069305] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1336. [  655.239440] msm_i2c msm_i2c.0: Error waiting for notbusy
  1337. [  655.239654] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1338. [  655.239776] Couldn't send ch id 22
  1339. [  655.285278] microp-klt: Setting lcd-backlight brightness to: 0x10
  1340. [  657.227783] msm_i2c msm_i2c.0: Error waiting for notbusy
  1341. [  657.227996] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1342. [  657.228302] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1343. [  659.226654] msm_i2c msm_i2c.0: Error waiting for notbusy
  1344. [  659.226867] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1345. [  659.226989] Couldn't send ch id 22
  1346. [  659.254516] microp-klt: Setting lcd-backlight brightness to: 0x10
  1347. [  661.219329] msm_i2c msm_i2c.0: Error waiting for notbusy
  1348. [  661.219543] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1349. [  661.219848] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1350. [  663.207366] msm_i2c msm_i2c.0: Error waiting for notbusy
  1351. [  663.207580] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1352. [  663.207702] Couldn't send ch id 22
  1353. [  663.228393] microp-klt: Setting lcd-backlight brightness to: 0x10
  1354. [  665.205932] msm_i2c msm_i2c.0: Error waiting for notbusy
  1355. [  665.206146] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1356. [  665.206451] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1357. [  667.251861] msm_i2c msm_i2c.0: Error waiting for notbusy
  1358. [  667.252044] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1359. [  667.252197] Couldn't send ch id 22
  1360. [  667.283935] microp-klt: Setting lcd-backlight brightness to: 0x10
  1361. [  669.240234] msm_i2c msm_i2c.0: Error waiting for notbusy
  1362. [  669.240447] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1363. [  669.240753] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1364. [  671.228485] msm_i2c msm_i2c.0: Error waiting for notbusy
  1365. [  671.228698] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1366. [  671.228820] Couldn't send ch id 22
  1367. [  671.276367] microp-klt: Setting lcd-backlight brightness to: 0x10
  1368. [  673.227630] msm_i2c msm_i2c.0: Error waiting for notbusy
  1369. [  673.227722] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1370. [  673.227905] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1371. [  675.267364] msm_i2c msm_i2c.0: Error waiting for notbusy
  1372. [  675.267578] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1373. [  675.267700] Couldn't send ch id 22
  1374. [  675.315338] microp-klt: Setting lcd-backlight brightness to: 0x00
  1375. [  677.263458] msm_i2c msm_i2c.0: Error waiting for notbusy
  1376. [  677.263671] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1377. [  677.263977] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1378. [  679.252075] msm_i2c msm_i2c.0: Error waiting for notbusy
  1379. [  679.252197] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1380. [  679.252258] Couldn't send ch id 22
  1381. [  679.308410] microp-klt: Setting lcd-backlight brightness to: 0x00
  1382. [  681.252868] msm_i2c msm_i2c.0: Error waiting for notbusy
  1383. [  681.253082] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1384. [  681.253387] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1385. [  683.240905] msm_i2c msm_i2c.0: Error waiting for notbusy
  1386. [  683.241119] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1387. [  683.241241] Couldn't send ch id 22
  1388. [  683.303192] microp-klt: Setting lcd-backlight brightness to: 0x00
  1389. [  685.253143] msm_i2c msm_i2c.0: Error waiting for notbusy
  1390. [  685.253356] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1391. [  685.253662] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1392. [  687.297943] msm_i2c msm_i2c.0: Error waiting for notbusy
  1393. [  687.298156] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1394. [  687.298278] Couldn't send ch id 22
  1395. [  687.328338] microp-klt: Setting lcd-backlight brightness to: 0x00
  1396. [  689.286102] msm_i2c msm_i2c.0: Error waiting for notbusy
  1397. [  689.286285] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1398. [  689.286437] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1399. [  691.274932] msm_i2c msm_i2c.0: Error waiting for notbusy
  1400. [  691.275115] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1401. [  691.275238] Couldn't send ch id 22
  1402. [  691.336029] microp-klt: Setting lcd-backlight brightness to: 0x00
  1403. [  693.267364] msm_i2c msm_i2c.0: Error waiting for notbusy
  1404. [  693.267578] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1405. [  693.267883] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1406. [  695.303710] msm_i2c msm_i2c.0: Error waiting for notbusy
  1407. [  695.303924] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1408. [  695.304046] Couldn't send ch id 22
  1409. [  697.317108] msm_i2c msm_i2c.0: Error waiting for notbusy
  1410. [  697.317321] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1411. [  697.317626] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1412. [  699.315460] msm_i2c msm_i2c.0: Error waiting for notbusy
  1413. [  699.315673] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1414. [  699.315795] Couldn't send ch id 40
  1415. [  699.319244] request_suspend_state: sleep (0->3) at 690750000000 (2010-02-07 17:19:22.470000000 UTC)
  1416. [  699.319519] Sending arm9_low_speed 2
  1417. [  699.319671] msmfb: panel sleeping
  1418. [  699.350646] epson_blank
  1419. [  699.350769] init epson blank
  1420. [  701.328613] msm_i2c msm_i2c.0: Error waiting for notbusy
  1421. [  701.328796] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1422. [  701.329101] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1423. [  703.316711] msm_i2c msm_i2c.0: Error waiting for notbusy
  1424. [  703.316925] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1425. [  703.317199] Couldn't send ch id 40
  1426. [  703.319519] request_suspend_state: wakeup (3->0) at 694730000000 (2010-02-07 17:19:26.450000000 UTC)
  1427. [  705.369750] msm_i2c msm_i2c.0: Error waiting for notbusy
  1428. [  705.369964] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1429. [  705.370269] Couldn't send ch id 70
  1430. [  707.414398] msm_i2c msm_i2c.0: Error waiting for notbusy
  1431. [  707.414520] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1432. [  707.414672] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1433. [  709.458862] msm_i2c msm_i2c.0: Error waiting for notbusy
  1434. [  709.459075] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1435. [  709.459350] Couldn't send ch id 70
  1436. [  711.466003] msm_i2c msm_i2c.0: Error waiting for notbusy
  1437. [  711.466217] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1438. [  711.466491] kionix-kxsd9: kxsd9_work: error -16
  1439. [  713.605255] msm_i2c msm_i2c.0: Error waiting for notbusy
  1440. [  713.605468] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1441. [  713.605743] Couldn't send ch id 40
  1442. [  713.737945] microp-klt: Setting lcd-backlight brightness to: 0x00
  1443. [  715.654846] msm_i2c msm_i2c.0: Error waiting for notbusy
  1444. [  715.655029] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1445. [  715.655151] Couldn't send ch id 70
  1446. [  717.643066] msm_i2c msm_i2c.0: Error waiting for notbusy
  1447. [  717.643249] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1448. [  717.643554] kionix-kxsd9: kxsd9_work: error -16
  1449. [  717.731933] init: untracked pid 1823 exited
  1450. [  719.712066] msm_i2c msm_i2c.0: Error waiting for notbusy
  1451. [  719.712280] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1452. [  719.712402] Couldn't send ch id 22
  1453. [  719.735504] request_suspend_state: sleep (0->3) at 710810000000 (2010-02-07 17:19:42.530000000 UTC)
  1454. [  721.738281] msm_i2c msm_i2c.0: Error waiting for notbusy
  1455. [  721.738494] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1456. [  721.738769] Couldn't send ch id 70
  1457. [  723.738037] msm_i2c msm_i2c.0: Error waiting for notbusy
  1458. [  723.738159] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1459. [  723.738342] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1460. [  725.796844] msm_i2c msm_i2c.0: Error waiting for notbusy
  1461. [  725.797058] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1462. [  725.797332] Couldn't send ch id 70
  1463. [  727.801116] msm_i2c msm_i2c.0: Error waiting for notbusy
  1464. [  727.801330] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1465. [  727.801605] kionix-kxsd9: kxsd9_work: error -16
  1466. [  729.842742] msm_i2c msm_i2c.0: Error waiting for notbusy
  1467. [  729.842956] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1468. [  729.843231] Couldn't send ch id 70
  1469. [  731.868286] msm_i2c msm_i2c.0: Error waiting for notbusy
  1470. [  731.868408] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1471. [  731.868591] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1472. [  733.906707] msm_i2c msm_i2c.0: Error waiting for notbusy
  1473. [  733.906921] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1474. [  733.907012] Couldn't send ch id 70
  1475. [  735.915222] msm_i2c msm_i2c.0: Error waiting for notbusy
  1476. [  735.915435] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1477. [  735.915527] Couldn't send ch id 70
  1478. [  737.957366] msm_i2c msm_i2c.0: Error waiting for notbusy
  1479. [  737.957489] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1480. [  737.957519] Couldn't send ch id 21
  1481. [  737.957580] blackstone panel deinit
  1482. [  738.020538] epson_suspend
  1483. [  738.021331] active wake lock vbus_present
  1484. [  738.021392] wake lock mmc_delayed_work, expired
  1485. [  738.021484] wake lock SMD_DS, expired
  1486. [  738.021545] wake lock evdev, expired
  1487. [  738.021606] wake lock tiwlan_rx_wake, expired
  1488. [  738.021728] active wake lock vbus_present
  1489. [  738.021789] wake lock mmc_delayed_work, expired
  1490. [  738.021850] wake lock SMD_DS, expired
  1491. [  738.021911] wake lock evdev, expired
  1492. [  738.021972] wake lock tiwlan_rx_wake, expired
  1493. [  741.814849] msm_i2c msm_i2c.0: Error waiting for notbusy
  1494. [  741.815032] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1495. [  741.815124] Couldn't send ch id 40
  1496. [  741.817443] request_suspend_state: wakeup (3->0) at 732600000000 (2010-02-07 17:20:04.320000000 UTC)
  1497. [  741.819305] epson_resume
  1498. [  741.819396] msmfb: panel waking
  1499. [  741.819488] msmfb: ready, waiting for full update
  1500. [  741.819549] Sending arm9_low_speed 7
  1501. [  741.824432] microp-klt: Setting lcd-backlight brightness to: 0x00
  1502. [  743.862457] msm_i2c msm_i2c.0: Error waiting for notbusy
  1503. [  743.862670] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1504. [  743.862762] Couldn't send ch id 22
  1505. [  745.870941] msm_i2c msm_i2c.0: Error waiting for notbusy
  1506. [  745.871124] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1507. [  745.871246] Couldn't send ch id 40
  1508. [  746.088104] msmfb: full update starting
  1509. [  746.143920] fake vsync
  1510. [  746.143981] msmfb_start_dma 60.000 ms after vsync request
  1511. [  746.175262] msmfb: full update completed
  1512. [  746.175354] msmfb: turning on panel
  1513. [  746.175384] epson_unblank
  1514. [  746.175384] init epson panel
  1515. [  746.175384] blackstone panel init
  1516. [  747.944519] msm_i2c msm_i2c.0: Error waiting for notbusy
  1517. [  747.944671] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1518. [  747.944946] kionix-kxsd9: kxsd9_work: error -16
  1519. [  749.932525] msm_i2c msm_i2c.0: Error waiting for notbusy
  1520. [  749.932678] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1521. [  749.932830] micropklt_read: error while asking for data address 66,33: -16
  1522. [  749.932952] microp-klt: Setting lcd-backlight brightness to: 0x00
  1523. [  751.138092] msmfb_pan_display timeout waiting for frame start, 1 1
  1524. [  751.921325] msm_i2c msm_i2c.0: Error waiting for notbusy
  1525. [  751.921508] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1526. [  751.921661] Couldn't send ch id 22
  1527. [  753.913696] msm_i2c msm_i2c.0: Error waiting for notbusy
  1528. [  753.913909] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1529. [  753.914184] Couldn't send ch id 21
  1530. [  755.901763] msm_i2c msm_i2c.0: Error waiting for notbusy
  1531. [  755.901977] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1532. [  755.902282] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1533. [  757.949768] msm_i2c msm_i2c.0: Error waiting for notbusy
  1534. [  757.949981] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1535. [  757.950256] Couldn't send ch id 40
  1536. [  759.937866] msm_i2c msm_i2c.0: Error waiting for notbusy
  1537. [  759.938079] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1538. [  759.938201] Couldn't send ch id 70
  1539. [  761.926269] msm_i2c msm_i2c.0: Error waiting for notbusy
  1540. [  761.926483] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1541. [  761.926788] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1542. [  763.924896] msm_i2c msm_i2c.0: Error waiting for notbusy
  1543. [  763.925109] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1544. [  763.925415] micropklt_read: error while asking for data address 66,33: -16
  1545. [  763.925567] microp-klt: Setting lcd-backlight brightness to: 0x00
  1546. [  765.913055] msm_i2c msm_i2c.0: Error waiting for notbusy
  1547. [  765.913238] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1548. [  765.913513] Couldn't send ch id 70
  1549. [  767.901397] msm_i2c msm_i2c.0: Error waiting for notbusy
  1550. [  767.901611] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1551. [  767.901916] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1552. [  769.943725] msm_i2c msm_i2c.0: Error waiting for notbusy
  1553. [  769.943908] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1554. [  769.944061] Couldn't send ch id 22
  1555. [  771.932464] msm_i2c msm_i2c.0: Error waiting for notbusy
  1556. [  771.932678] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1557. [  771.932952] Couldn't send ch id 70
  1558. [  773.920288] msm_i2c msm_i2c.0: Error waiting for notbusy
  1559. [  773.920501] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1560. [  773.920806] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1561. [  775.957458] msm_i2c msm_i2c.0: Error waiting for notbusy
  1562. [  775.957672] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1563. [  775.957946] Couldn't send ch id 40
  1564. [  775.960266] request_suspend_state: wakeup (0->0) at 766390000000 (2010-02-07 17:20:38.110000000 UTC)
  1565. [  775.968933] microp-klt: Setting lcd-backlight brightness to: 0x00
  1566. [  777.945922] msm_i2c msm_i2c.0: Error waiting for notbusy
  1567. [  777.946136] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1568. [  777.946380] Couldn't send ch id 70
  1569. [  779.944183] msm_i2c msm_i2c.0: Error waiting for notbusy
  1570. [  779.944396] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1571. [  779.944702] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1572. [  781.932739] msm_i2c msm_i2c.0: Error waiting for notbusy
  1573. [  781.932952] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1574. [  781.933074] Couldn't send ch id 22
  1575. [  783.941284] msm_i2c msm_i2c.0: Error waiting for notbusy
  1576. [  783.941497] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1577. [  783.941772] Couldn't send ch id 70
  1578. [  785.929321] msm_i2c msm_i2c.0: Error waiting for notbusy
  1579. [  785.929534] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1580. [  785.929809] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1581. [  787.981811] msm_i2c msm_i2c.0: Error waiting for notbusy
  1582. [  787.982025] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1583. [  787.982299] Couldn't send ch id 40
  1584. [  788.056701] microp-klt: Setting lcd-backlight brightness to: 0x00
  1585. [  790.014129] msm_i2c msm_i2c.0: Error waiting for notbusy
  1586. [  790.014343] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1587. [  790.014617] Couldn't send ch id 70
  1588. [  792.002532] msm_i2c msm_i2c.0: Error waiting for notbusy
  1589. [  792.002746] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1590. [  792.003021] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1591. [  793.990631] msm_i2c msm_i2c.0: Error waiting for notbusy
  1592. [  793.990844] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1593. [  793.990966] Couldn't send ch id 22
  1594. [  794.011657] microp-klt: Setting lcd-backlight brightness to: 0x00
  1595. [  795.978698] msm_i2c msm_i2c.0: Error waiting for notbusy
  1596. [  795.978912] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1597. [  795.979034] Couldn't send ch id 70
  1598. [  797.967132] msm_i2c msm_i2c.0: Error waiting for notbusy
  1599. [  797.967346] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1600. [  797.967620] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1601. [  800.009094] msm_i2c msm_i2c.0: Error waiting for notbusy
  1602. [  800.009307] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1603. [  800.009429] Couldn't send ch id 22
  1604. [  802.017883] msm_i2c msm_i2c.0: Error waiting for notbusy
  1605. [  802.018096] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1606. [  802.018371] Couldn't send ch id 70
  1607. [  804.006011] msm_i2c msm_i2c.0: Error waiting for notbusy
  1608. [  804.006195] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1609. [  804.006500] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1610. [  806.063842] msm_i2c msm_i2c.0: Error waiting for notbusy
  1611. [  806.064056] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1612. [  806.064178] Couldn't send ch id 40
  1613. [  806.067718] request_suspend_state: sleep (0->3) at 796190000000 (2010-02-07 17:21:07.910000000 UTC)
  1614. [  806.069549] Sending arm9_low_speed 2
  1615. [  808.052337] msm_i2c msm_i2c.0: Error waiting for notbusy
  1616. [  808.052551] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1617. [  808.052825] Couldn't send ch id 70
  1618. [  810.040374] msm_i2c msm_i2c.0: Error waiting for notbusy
  1619. [  810.040588] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1620. [  810.040893] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1621. [  812.028900] msm_i2c msm_i2c.0: Error waiting for notbusy
  1622. [  812.029113] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1623. [  812.029388] Couldn't send ch id 40
  1624. [  812.031860] request_suspend_state: wakeup (3->0) at 802130000000 (2010-02-07 17:21:13.850000000 UTC)
  1625. [  814.073333] msm_i2c msm_i2c.0: Error waiting for notbusy
  1626. [  814.073516] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1627. [  814.073760] Couldn't send ch id 70
  1628. [  816.061431] msm_i2c msm_i2c.0: Error waiting for notbusy
  1629. [  816.061584] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1630. [  816.061706] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1631. [  817.462005] msmfb_pan_display timeout waiting for frame start, 1 1
  1632. [  818.154907] msm_i2c msm_i2c.0: Error waiting for notbusy
  1633. [  818.155090] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1634. [  818.155334] Couldn't send ch id 70
  1635. [  820.143035] msm_i2c msm_i2c.0: Error waiting for notbusy
  1636. [  820.143218] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1637. [  820.143310] kionix-kxsd9: kxsd9_work: error -16
  1638. [  822.223114] msm_i2c msm_i2c.0: Error waiting for notbusy
  1639. [  822.223297] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1640. [  822.223541] Couldn't send ch id 40
  1641. [  822.330444] microp-klt: Setting lcd-backlight brightness to: 0x00
  1642. [  822.607299] msmfb_pan_display timeout waiting for frame start, 1 1
  1643. [  824.275726] msm_i2c msm_i2c.0: Error waiting for notbusy
  1644. [  824.275878] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1645. [  824.276153] Couldn't send ch id 70
  1646. [  826.263763] msm_i2c msm_i2c.0: Error waiting for notbusy
  1647. [  826.263946] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1648. [  826.264190] kionix-kxsd9: kxsd9_work: error -16
  1649. [  827.688323] msmfb_pan_display timeout waiting for frame start, 1 1
  1650. [  828.300781] msm_i2c msm_i2c.0: Error waiting for notbusy
  1651. [  828.300964] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1652. [  828.301116] Couldn't send ch id 22
  1653. [  828.324188] request_suspend_state: sleep (0->3) at 818140000000 (2010-02-07 17:21:29.860000000 UTC)
  1654. [  830.334014] msm_i2c msm_i2c.0: Error waiting for notbusy
  1655. [  830.334197] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1656. [  830.334442] Couldn't send ch id 70
  1657. [  832.322509] msm_i2c msm_i2c.0: Error waiting for notbusy
  1658. [  832.322692] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1659. [  832.322967] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1660. [  833.517272] msmfb_pan_display timeout waiting for frame start, 1 1
  1661. [  834.360748] msm_i2c msm_i2c.0: Error waiting for notbusy
  1662. [  834.360931] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1663. [  834.361175] Couldn't send ch id 70
  1664. [  836.348937] msm_i2c msm_i2c.0: Error waiting for notbusy
  1665. [  836.349121] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1666. [  836.349212] kionix-kxsd9: kxsd9_work: error -16
  1667. [  838.431793] msm_i2c msm_i2c.0: Error waiting for notbusy
  1668. [  838.431976] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1669. [  838.432220] Couldn't send ch id 70
  1670. [  838.602508] msmfb_pan_display timeout waiting for frame start, 1 1
  1671. [  840.419891] msm_i2c msm_i2c.0: Error waiting for notbusy
  1672. [  840.420104] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1673. [  840.420257] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1674. [  842.468048] msm_i2c msm_i2c.0: Error waiting for notbusy
  1675. [  842.468261] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1676. [  842.468383] Couldn't send ch id 70
  1677. [  844.546112] msm_i2c msm_i2c.0: Error waiting for notbusy
  1678. [  844.546325] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1679. [  844.546417] Couldn't send ch id 70
  1680. [  846.554321] msm_i2c msm_i2c.0: Error waiting for notbusy
  1681. [  846.554534] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1682. [  846.554626] Couldn't send ch id 70
  1683. [  848.562896] msm_i2c msm_i2c.0: Error waiting for notbusy
  1684. [  848.563110] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1685. [  848.563201] Couldn't send ch id 70
  1686. [  850.571075] msm_i2c msm_i2c.0: Error waiting for notbusy
  1687. [  850.571289] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1688. [  850.571380] Couldn't send ch id 70
  1689. [  852.589691] msm_i2c msm_i2c.0: Error waiting for notbusy
  1690. [  852.589904] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1691. [  852.589996] Couldn't send ch id 70
  1692. [  854.657043] msm_i2c msm_i2c.0: Error waiting for notbusy
  1693. [  854.657257] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1694. [  854.657348] Couldn't send ch id 70
  1695. [  856.665252] msm_i2c msm_i2c.0: Error waiting for notbusy
  1696. [  856.665466] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1697. [  856.665557] Couldn't send ch id 70
  1698. [  858.673919] msm_i2c msm_i2c.0: Error waiting for notbusy
  1699. [  858.674133] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1700. [  858.674224] Couldn't send ch id 70
  1701. [  860.698852] msm_i2c msm_i2c.0: Error waiting for notbusy
  1702. [  860.699035] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1703. [  860.699096] Couldn't send ch id 70
  1704. [  862.707366] msm_i2c msm_i2c.0: Error waiting for notbusy
  1705. [  862.707550] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1706. [  862.707611] Couldn't send ch id 70
  1707. [  864.042877] msmfb_pan_display timeout waiting for frame start, 1 1
  1708. [  864.764801] msm_i2c msm_i2c.0: Error waiting for notbusy
  1709. [  864.764984] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1710. [  864.765045] Couldn't send ch id 70
  1711. [  866.773010] msm_i2c msm_i2c.0: Error waiting for notbusy
  1712. [  866.773193] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1713. [  866.773254] Couldn't send ch id 70
  1714. [  868.781707] msm_i2c msm_i2c.0: Error waiting for notbusy
  1715. [  868.781890] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1716. [  868.781951] Couldn't send ch id 70
  1717. [  869.123138] msmfb_pan_display timeout waiting for frame start, 1 1
  1718. [  870.790039] msm_i2c msm_i2c.0: Error waiting for notbusy
  1719. [  870.790252] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1720. [  870.790344] Couldn't send ch id 70
  1721. [  872.809936] msm_i2c msm_i2c.0: Error waiting for notbusy
  1722. [  872.810058] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1723. [  872.810180] Couldn't send ch id 70
  1724. [  874.851928] msm_i2c msm_i2c.0: Error waiting for notbusy
  1725. [  874.852111] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1726. [  874.852264] Couldn't send ch id 40
  1727. [  874.854797] request_suspend_state: wakeup (3->0) at 864110000000 (2010-02-07 17:22:15.830000000 UTC)
  1728. [  874.859710] microp-klt: Setting lcd-backlight brightness to: 0x00
  1729. [  876.840148] msm_i2c msm_i2c.0: Error waiting for notbusy
  1730. [  876.840362] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1731. [  876.840637] Couldn't send ch id 70
  1732. [  878.828643] msm_i2c msm_i2c.0: Error waiting for notbusy
  1733. [  878.828857] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1734. [  878.828979] Couldn't send ch id 22
  1735. [  880.816711] msm_i2c msm_i2c.0: Error waiting for notbusy
  1736. [  880.816925] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1737. [  880.817047] Couldn't send ch id 70
  1738. [  882.805206] msm_i2c msm_i2c.0: Error waiting for notbusy
  1739. [  882.805419] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1740. [  882.805541] Couldn't send ch id 40
  1741. [  884.852508] msm_i2c msm_i2c.0: Error waiting for notbusy
  1742. [  884.852722] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1743. [  884.852844] Couldn't send ch id 40
  1744. [  886.857727] msm_i2c msm_i2c.0: Error waiting for notbusy
  1745. [  886.857879] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1746. [  886.858123] Couldn't send ch id 70
  1747. [  888.846038] msm_i2c msm_i2c.0: Error waiting for notbusy
  1748. [  888.846221] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1749. [  888.846466] kionix-kxsd9: kxsd9_work: error -16
  1750. [  890.161437] msmfb_pan_display timeout waiting for frame start, 1 1
  1751. [  890.834228] msm_i2c msm_i2c.0: Error waiting for notbusy
  1752. [  890.834442] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1753. [  890.834747] micropklt_read: error while asking for data address 66,33: -16
  1754. [  890.834899] microp-klt: Setting lcd-backlight brightness to: 0x00
  1755. [  892.822723] msm_i2c msm_i2c.0: Error waiting for notbusy
  1756. [  892.822906] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1757. [  892.823211] Couldn't send ch id 70
  1758. [  894.821411] msm_i2c msm_i2c.0: Error waiting for notbusy
  1759. [  894.821624] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1760. [  894.821929] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1761. [  896.873077] msm_i2c msm_i2c.0: Error waiting for notbusy
  1762. [  896.873291] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1763. [  896.873413] Couldn't send ch id 22
  1764. [  898.863525] msm_i2c msm_i2c.0: Error waiting for notbusy
  1765. [  898.863708] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1766. [  898.863983] Couldn't send ch id 70
  1767. [  900.858306] msm_i2c msm_i2c.0: Error waiting for notbusy
  1768. [  900.858520] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1769. [  900.858795] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1770. [  902.846496] msm_i2c msm_i2c.0: Error waiting for notbusy
  1771. [  902.846679] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1772. [  902.846801] Couldn't send ch id 40
  1773. [  902.850433] request_suspend_state: sleep (0->3) at 891870000000 (2010-02-07 17:22:43.590000000 UTC)
  1774. [  904.843414] msm_i2c msm_i2c.0: Error waiting for notbusy
  1775. [  904.843597] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1776. [  904.843933] micropklt_read: error while asking for data address 66,33: -16
  1777. [  906.831451] msm_i2c msm_i2c.0: Error waiting for notbusy
  1778. [  906.831665] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1779. [  906.831939] Couldn't send ch id 70
  1780. [  908.829681] msm_i2c msm_i2c.0: Error waiting for notbusy
  1781. [  908.829895] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1782. [  908.830200] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1783. [  910.881164] msm_i2c msm_i2c.0: Error waiting for notbusy
  1784. [  910.881347] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1785. [  910.881622] Couldn't send ch id 40
  1786. [  910.884002] request_suspend_state: wakeup (3->0) at 899810000000 (2010-02-07 17:22:51.530000000 UTC)
  1787. [  912.875061] msm_i2c msm_i2c.0: Error waiting for notbusy
  1788. [  912.875244] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1789. [  912.875518] Couldn't send ch id 70
  1790. [  914.863647] msm_i2c msm_i2c.0: Error waiting for notbusy
  1791. [  914.863861] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1792. [  914.864166] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1793. [  915.085021] microp-klt: Setting lcd-backlight brightness to: 0x00
  1794. [  916.902496] msm_i2c msm_i2c.0: Error waiting for notbusy
  1795. [  916.902679] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1796. [  916.902923] Couldn't send ch id 70
  1797. [  918.890533] msm_i2c msm_i2c.0: Error waiting for notbusy
  1798. [  918.890716] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1799. [  918.890960] kionix-kxsd9: kxsd9_work: error -16
  1800. [  920.213012] msmfb_pan_display timeout waiting for frame start, 1 1
  1801. [  920.986236] msm_i2c msm_i2c.0: Error waiting for notbusy
  1802. [  920.986419] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1803. [  920.986511] Couldn't send ch id 22
  1804. [  922.974212] msm_i2c msm_i2c.0: Error waiting for notbusy
  1805. [  922.974365] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1806. [  922.974609] Couldn't send ch id 70
  1807. [  924.983154] msm_i2c msm_i2c.0: Error waiting for notbusy
  1808. [  924.983337] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1809. [  924.983581] kionix-kxsd9: kxsd9_work: error -16
  1810. [  925.244598] msmfb_pan_display timeout waiting for frame start, 1 1
  1811. [  927.049652] msm_i2c msm_i2c.0: Error waiting for notbusy
  1812. [  927.049865] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1813. [  927.049987] Couldn't send ch id 40
  1814. [  929.078643] msm_i2c msm_i2c.0: Error waiting for notbusy
  1815. [  929.078857] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1816. [  929.078979] Couldn't send ch id 40
  1817. [  929.084075] microp-klt: Setting lcd-backlight brightness to: 0x00
  1818. [  931.066772] msm_i2c msm_i2c.0: Error waiting for notbusy
  1819. [  931.066986] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1820. [  931.067108] Couldn't send ch id 22
  1821. [  933.054840] msm_i2c msm_i2c.0: Error waiting for notbusy
  1822. [  933.055053] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1823. [  933.055328] Couldn't send ch id 70
  1824. [  935.043334] msm_i2c msm_i2c.0: Error waiting for notbusy
  1825. [  935.043548] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1826. [  935.043853] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1827. [  937.080932] msm_i2c msm_i2c.0: Error waiting for notbusy
  1828. [  937.081146] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1829. [  937.081268] Couldn't send ch id 40
  1830. [  937.084869] request_suspend_state: sleep (0->3) at 925690000000 (2010-02-07 17:23:17.410000000 UTC)
  1831. [  939.076080] msm_i2c msm_i2c.0: Error waiting for notbusy
  1832. [  939.076263] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1833. [  939.076507] micropklt_read: error while asking for data address 66,33: -16
  1834. [  941.064514] msm_i2c msm_i2c.0: Error waiting for notbusy
  1835. [  941.064697] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1836. [  941.064941] Couldn't send ch id 70
  1837. [  942.259460] msmfb_pan_display timeout waiting for frame start, 1 1
  1838. [  943.056671] msm_i2c msm_i2c.0: Error waiting for notbusy
  1839. [  943.056884] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1840. [  943.057159] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1841. [  945.045318] msm_i2c msm_i2c.0: Error waiting for notbusy
  1842. [  945.045501] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1843. [  945.045776] Couldn't send ch id 40
  1844. [  945.048248] request_suspend_state: wakeup (3->0) at 933610000000 (2010-02-07 17:23:25.330000000 UTC)
  1845. [  947.100738] msm_i2c msm_i2c.0: Error waiting for notbusy
  1846. [  947.100921] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1847. [  947.101165] Couldn't send ch id 70
  1848. [  949.089721] msm_i2c msm_i2c.0: Error waiting for notbusy
  1849. [  949.089904] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1850. [  949.090179] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1851. [  950.350677] msmfb_pan_display timeout waiting for frame start, 1 1
  1852. [  951.154052] msm_i2c msm_i2c.0: Error waiting for notbusy
  1853. [  951.154205] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1854. [  951.154479] micropklt_read: error while asking for data address 66,33: -16
  1855. [  953.142272] msm_i2c msm_i2c.0: Error waiting for notbusy
  1856. [  953.142425] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1857. [  953.142669] Couldn't send ch id 70
  1858. [  955.187683] msm_i2c msm_i2c.0: Error waiting for notbusy
  1859. [  955.187866] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1860. [  955.188110] kionix-kxsd9: kxsd9_work: error -16
  1861. [  955.306884] init: untracked pid 1875 exited
  1862. [  955.474792] msmfb_pan_display timeout waiting for frame start, 1 1
  1863. [  957.275329] msm_i2c msm_i2c.0: Error waiting for notbusy
  1864. [  957.275482] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1865. [  957.275726] Couldn't send ch id 40
  1866. [  957.381256] microp-klt: Setting lcd-backlight brightness to: 0x00
  1867. [  959.319335] msm_i2c msm_i2c.0: Error waiting for notbusy
  1868. [  959.319488] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1869. [  959.319732] Couldn't send ch id 70
  1870. [  960.565124] msmfb_pan_display timeout waiting for frame start, 1 1
  1871. [  961.318145] msm_i2c msm_i2c.0: Error waiting for notbusy
  1872. [  961.318328] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1873. [  961.318634] kionix-kxsd9: kxsd9_work: error -16
  1874. [  963.356201] msm_i2c msm_i2c.0: Error waiting for notbusy
  1875. [  963.356414] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1876. [  963.356536] Couldn't send ch id 22
  1877. [  963.379638] request_suspend_state: sleep (0->3) at 951610000000 (2010-02-07 17:23:43.330000000 UTC)
  1878. [  965.365051] msm_i2c msm_i2c.0: Error waiting for notbusy
  1879. [  965.365264] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1880. [  965.365539] Couldn't send ch id 70
  1881. [  967.353179] msm_i2c msm_i2c.0: Error waiting for notbusy
  1882. [  967.353393] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1883. [  967.353698] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1884. [  969.437072] msm_i2c msm_i2c.0: Error waiting for notbusy
  1885. [  969.437286] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1886. [  969.437561] Couldn't send ch id 40
  1887. [  969.439941] request_suspend_state: wakeup (3->0) at 957560000000 (2010-02-07 17:23:49.280000000 UTC)
  1888. [  971.460754] msm_i2c msm_i2c.0: Error waiting for notbusy
  1889. [  971.460937] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1890. [  971.461181] Couldn't send ch id 70
  1891. [  973.448852] msm_i2c msm_i2c.0: Error waiting for notbusy
  1892. [  973.449035] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1893. [  973.449310] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1894. [  974.629302] msmfb_pan_display timeout waiting for frame start, 1 1
  1895. [  975.462738] msm_i2c msm_i2c.0: Error waiting for notbusy
  1896. [  975.462921] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1897. [  975.463195] micropklt_read: error while asking for data address 66,33: -16
  1898. [  977.450988] msm_i2c msm_i2c.0: Error waiting for notbusy
  1899. [  977.451171] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1900. [  977.451416] Couldn't send ch id 70
  1901. [  979.439056] msm_i2c msm_i2c.0: Error waiting for notbusy
  1902. [  979.439239] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1903. [  979.439483] kionix-kxsd9: kxsd9_work: error -16
  1904. [  979.709136] msmfb_pan_display timeout waiting for frame start, 1 1
  1905. [  981.488372] msm_i2c msm_i2c.0: Error waiting for notbusy
  1906. [  981.488586] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1907. [  981.488861] Couldn't send ch id 40
  1908. [  983.476867] msm_i2c msm_i2c.0: Error waiting for notbusy
  1909. [  983.477111] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1910. [  983.477386] Couldn't send ch id 70
  1911. [  985.465240] msm_i2c msm_i2c.0: Error waiting for notbusy
  1912. [  985.465454] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1913. [  985.465728] kionix-kxsd9: kxsd9_work: error -16
  1914. [  987.502960] msm_i2c msm_i2c.0: Error waiting for notbusy
  1915. [  987.503143] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1916. [  987.503448] micropklt_read: error while asking for data address 66,33: -16
  1917. [  987.503631] microp-klt: Setting lcd-backlight brightness to: 0x00
  1918. [  989.490966] msm_i2c msm_i2c.0: Error waiting for notbusy
  1919. [  989.491180] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1920. [  989.491455] Couldn't send ch id 70
  1921. [  991.479309] msm_i2c msm_i2c.0: Error waiting for notbusy
  1922. [  991.479522] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1923. [  991.479827] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1924. [  993.518371] msm_i2c msm_i2c.0: Error waiting for notbusy
  1925. [  993.518554] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1926. [  993.518707] Couldn't send ch id 22
  1927. [  993.541961] request_suspend_state: sleep (0->3) at 981400000000 (2010-02-07 17:24:13.120000000 UTC)
  1928. [  995.532379] msm_i2c msm_i2c.0: Error waiting for notbusy
  1929. [  995.532531] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1930. [  995.532775] Couldn't send ch id 70
  1931. [  997.520507] msm_i2c msm_i2c.0: Error waiting for notbusy
  1932. [  997.520660] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1933. [  997.520935] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1934. [  998.694091] msmfb_pan_display timeout waiting for frame start, 1 1
  1935. [  999.598144] msm_i2c msm_i2c.0: Error waiting for notbusy
  1936. [  999.598327] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1937. [  999.598571] micropklt_read: error while asking for data address 66,33: -16
  1938. [ 1001.586669] msm_i2c msm_i2c.0: Error waiting for notbusy
  1939. [ 1001.586853] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1940. [ 1001.587097] Couldn't send ch id 70
  1941. [ 1003.574920] msm_i2c msm_i2c.0: Error waiting for notbusy
  1942. [ 1003.575073] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1943. [ 1003.575195] kionix-kxsd9: kxsd9_work: error -16
  1944. [ 1003.785949] msmfb_pan_display timeout waiting for frame start, 1 1
  1945. [ 1005.637817] msm_i2c msm_i2c.0: Error waiting for notbusy
  1946. [ 1005.638000] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1947. [ 1005.638244] Couldn't send ch id 70
  1948. [ 1007.625885] msm_i2c msm_i2c.0: Error waiting for notbusy
  1949. [ 1007.626068] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1950. [ 1007.626190] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  1951. [ 1008.892120] msmfb_pan_display timeout waiting for frame start, 1 1
  1952. [ 1009.665283] msm_i2c msm_i2c.0: Error waiting for notbusy
  1953. [ 1009.665496] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1954. [ 1009.665588] Couldn't send ch id 70
  1955. [ 1011.673889] msm_i2c msm_i2c.0: Error waiting for notbusy
  1956. [ 1011.674072] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1957. [ 1011.674194] Couldn't send ch id 70
  1958. [ 1013.682006] msm_i2c msm_i2c.0: Error waiting for notbusy
  1959. [ 1013.682220] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1960. [ 1013.682312] Couldn't send ch id 70
  1961. [ 1015.700683] msm_i2c msm_i2c.0: Error waiting for notbusy
  1962. [ 1015.700897] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1963. [ 1015.700988] Couldn't send ch id 70
  1964. [ 1017.758392] msm_i2c msm_i2c.0: Error waiting for notbusy
  1965. [ 1017.758605] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1966. [ 1017.758728] Couldn't send ch id 70
  1967. [ 1019.766571] msm_i2c msm_i2c.0: Error waiting for notbusy
  1968. [ 1019.766784] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1969. [ 1019.766876] Couldn't send ch id 70
  1970. [ 1021.775085] msm_i2c msm_i2c.0: Error waiting for notbusy
  1971. [ 1021.775299] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1972. [ 1021.775390] Couldn't send ch id 70
  1973. [ 1023.783294] msm_i2c msm_i2c.0: Error waiting for notbusy
  1974. [ 1023.783508] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1975. [ 1023.783599] Couldn't send ch id 70
  1976. [ 1025.802062] msm_i2c msm_i2c.0: Error waiting for notbusy
  1977. [ 1025.802276] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1978. [ 1025.802368] Couldn't send ch id 70
  1979. [ 1027.869628] msm_i2c msm_i2c.0: Error waiting for notbusy
  1980. [ 1027.869842] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1981. [ 1027.869934] Couldn't send ch id 70
  1982. [ 1029.877807] msm_i2c msm_i2c.0: Error waiting for notbusy
  1983. [ 1029.878021] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1984. [ 1029.878143] Couldn't send ch id 70
  1985. [ 1031.886505] msm_i2c msm_i2c.0: Error waiting for notbusy
  1986. [ 1031.886718] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1987. [ 1031.886810] Couldn't send ch id 70
  1988. [ 1033.894714] msm_i2c msm_i2c.0: Error waiting for notbusy
  1989. [ 1033.894927] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1990. [ 1033.895019] Couldn't send ch id 70
  1991. [ 1035.913452] msm_i2c msm_i2c.0: Error waiting for notbusy
  1992. [ 1035.913665] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1993. [ 1035.913757] Couldn't send ch id 70
  1994. [ 1037.984771] msm_i2c msm_i2c.0: Error waiting for notbusy
  1995. [ 1037.984985] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1996. [ 1037.985076] Couldn't send ch id 70
  1997. [ 1039.992980] msm_i2c msm_i2c.0: Error waiting for notbusy
  1998. [ 1039.993164] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  1999. [ 1039.993286] Couldn't send ch id 70
  2000. [ 1042.008392] msm_i2c msm_i2c.0: Error waiting for notbusy
  2001. [ 1042.008544] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2002. [ 1042.008636] Couldn't send ch id 70
  2003. [ 1044.016571] msm_i2c msm_i2c.0: Error waiting for notbusy
  2004. [ 1044.016723] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2005. [ 1044.016815] Couldn't send ch id 70
  2006. [ 1046.041534] msm_i2c msm_i2c.0: Error waiting for notbusy
  2007. [ 1046.041687] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2008. [ 1046.041778] Couldn't send ch id 70
  2009. [ 1046.141998] msmfb_pan_display timeout waiting for frame start, 1 1
  2010. [ 1048.111572] msm_i2c msm_i2c.0: Error waiting for notbusy
  2011. [ 1048.111724] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2012. [ 1048.111816] Couldn't send ch id 70
  2013. [ 1050.119750] msm_i2c msm_i2c.0: Error waiting for notbusy
  2014. [ 1050.119934] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2015. [ 1050.119995] Couldn't send ch id 70
  2016. [ 1051.224700] msmfb_pan_display timeout waiting for frame start, 1 1
  2017. [ 1052.128356] msm_i2c msm_i2c.0: Error waiting for notbusy
  2018. [ 1052.128570] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2019. [ 1052.128662] Couldn't send ch id 70
  2020. [ 1054.136596] msm_i2c msm_i2c.0: Error waiting for notbusy
  2021. [ 1054.136810] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2022. [ 1054.136901] Couldn't send ch id 70
  2023. [ 1056.155273] msm_i2c msm_i2c.0: Error waiting for notbusy
  2024. [ 1056.155487] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2025. [ 1056.155578] Couldn't send ch id 70
  2026. [ 1058.222869] msm_i2c msm_i2c.0: Error waiting for notbusy
  2027. [ 1058.223083] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2028. [ 1058.223175] Couldn't send ch id 70
  2029. [ 1060.231079] msm_i2c msm_i2c.0: Error waiting for notbusy
  2030. [ 1060.231292] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2031. [ 1060.231384] Couldn't send ch id 70
  2032. [ 1062.239715] msm_i2c msm_i2c.0: Error waiting for notbusy
  2033. [ 1062.239929] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2034. [ 1062.240020] Couldn't send ch id 70
  2035. [ 1064.247955] msm_i2c msm_i2c.0: Error waiting for notbusy
  2036. [ 1064.248168] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2037. [ 1064.248260] Couldn't send ch id 70
  2038. [ 1066.266754] msm_i2c msm_i2c.0: Error waiting for notbusy
  2039. [ 1066.266937] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2040. [ 1066.267059] Couldn't send ch id 70
  2041. [ 1068.334350] msm_i2c msm_i2c.0: Error waiting for notbusy
  2042. [ 1068.334533] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2043. [ 1068.334655] Couldn't send ch id 70
  2044. [ 1070.342590] msm_i2c msm_i2c.0: Error waiting for notbusy
  2045. [ 1070.342773] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2046. [ 1070.342895] Couldn't send ch id 70
  2047. [ 1072.351257] msm_i2c msm_i2c.0: Error waiting for notbusy
  2048. [ 1072.351440] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2049. [ 1072.351562] Couldn't send ch id 70
  2050. [ 1074.359497] msm_i2c msm_i2c.0: Error waiting for notbusy
  2051. [ 1074.359680] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2052. [ 1074.359802] Couldn't send ch id 70
  2053. [ 1076.367706] msm_i2c msm_i2c.0: Error waiting for notbusy
  2054. [ 1076.367889] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2055. [ 1076.368011] Couldn't send ch id 70
  2056. [ 1078.435516] msm_i2c msm_i2c.0: Error waiting for notbusy
  2057. [ 1078.435729] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2058. [ 1078.435821] Couldn't send ch id 70
  2059. [ 1080.443725] msm_i2c msm_i2c.0: Error waiting for notbusy
  2060. [ 1080.443939] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2061. [ 1080.444030] Couldn't send ch id 70
  2062. [ 1082.452392] msm_i2c msm_i2c.0: Error waiting for notbusy
  2063. [ 1082.452575] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2064. [ 1082.452667] Couldn't send ch id 70
  2065. [ 1084.460632] msm_i2c msm_i2c.0: Error waiting for notbusy
  2066. [ 1084.460845] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2067. [ 1084.460937] Couldn't send ch id 70
  2068. [ 1086.469360] msm_i2c msm_i2c.0: Error waiting for notbusy
  2069. [ 1086.469543] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2070. [ 1086.469665] Couldn't send ch id 70
  2071. [ 1086.499511] msmfb: panel awake
  2072. [ 1086.499694] msmfb: panel sleeping
  2073. [ 1086.530670] epson_blank
  2074. [ 1086.530731] init epson blank
  2075. [ 1088.647125] msm_i2c msm_i2c.0: Error waiting for notbusy
  2076. [ 1088.647338] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2077. [ 1088.647430] Couldn't send ch id 70
  2078. [ 1090.655303] msm_i2c msm_i2c.0: Error waiting for notbusy
  2079. [ 1090.655517] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2080. [ 1090.655609] Couldn't send ch id 70
  2081. [ 1092.663848] msm_i2c msm_i2c.0: Error waiting for notbusy
  2082. [ 1092.664062] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2083. [ 1092.664154] Couldn't send ch id 70
  2084. [ 1094.672088] msm_i2c msm_i2c.0: Error waiting for notbusy
  2085. [ 1094.672302] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2086. [ 1094.672393] Couldn't send ch id 70
  2087. [ 1096.690826] msm_i2c msm_i2c.0: Error waiting for notbusy
  2088. [ 1096.691040] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2089. [ 1096.691131] Couldn't send ch id 70
  2090. [ 1098.752716] msm_i2c msm_i2c.0: Error waiting for notbusy
  2091. [ 1098.752929] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2092. [ 1098.753021] Couldn't send ch id 70
  2093. [ 1100.761016] msm_i2c msm_i2c.0: Error waiting for notbusy
  2094. [ 1100.761199] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2095. [ 1100.761322] Couldn't send ch id 70
  2096. [ 1102.783996] msm_i2c msm_i2c.0: Error waiting for notbusy
  2097. [ 1102.784210] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2098. [ 1102.784301] Couldn't send ch id 70
  2099. [ 1104.792205] msm_i2c msm_i2c.0: Error waiting for notbusy
  2100. [ 1104.792419] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2101. [ 1104.792510] Couldn't send ch id 21
  2102. [ 1104.792633] blackstone panel deinit
  2103. [ 1104.854553] epson_suspend
  2104. [ 1104.856140] active wake lock vbus_present
  2105. [ 1104.856262] wake lock mmc_delayed_work, expired
  2106. [ 1104.856323] wake lock SMD_DS, expired
  2107. [ 1104.856384] wake lock evdev, expired
  2108. [ 1104.856475] wake lock tiwlan_rx_wake, expired
  2109. [ 1104.856567] active wake lock vbus_present
  2110. [ 1104.856658] wake lock mmc_delayed_work, expired
  2111. [ 1104.856719] wake lock SMD_DS, expired
  2112. [ 1104.856781] wake lock evdev, expired
  2113. [ 1104.856842] wake lock tiwlan_rx_wake, expired
  2114. [ 1195.075134] init: untracked pid 1933 exited
  2115. [ 1303.684814] msm_i2c msm_i2c.0: Error waiting for notbusy
  2116. [ 1303.684997] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2117. [ 1303.685119] Couldn't send ch id 40
  2118. [ 1303.687469] request_suspend_state: wakeup (3->0) at 1288490000000 (2010-02-07 17:29:20.210000000 UTC)
  2119. [ 1303.694000] microp-klt: Setting lcd-backlight brightness to: 0x00
  2120. [ 1303.694305] epson_resume
  2121. [ 1303.694366] msmfb: panel waking
  2122. [ 1303.694427] msmfb: ready, waiting for full update
  2123. [ 1303.694488] Sending arm9_low_speed 7
  2124. [ 1305.681335] msm_i2c msm_i2c.0: Error waiting for notbusy
  2125. [ 1305.681549] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2126. [ 1305.681640] Couldn't send ch id 22
  2127. [ 1307.701324] msm_i2c msm_i2c.0: Error waiting for notbusy
  2128. [ 1307.701416] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2129. [ 1307.701446] Couldn't send ch id 40
  2130. [ 1307.851135] microp-klt: Setting lcd-backlight brightness to: 0x00
  2131. [ 1307.875427] msmfb: full update starting
  2132. [ 1307.933807] fake vsync
  2133. [ 1307.933837] msmfb_start_dma 60.000 ms after vsync request
  2134. [ 1307.965087] msmfb: full update completed
  2135. [ 1307.965179] msmfb: turning on panel
  2136. [ 1307.965209] epson_unblank
  2137. [ 1307.965240] init epson panel
  2138. [ 1307.965270] blackstone panel init
  2139. [ 1309.756958] msm_i2c msm_i2c.0: Error waiting for notbusy
  2140. [ 1309.757171] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2141. [ 1309.757446] kionix-kxsd9: kxsd9_work: error -16
  2142. [ 1311.795349] msm_i2c msm_i2c.0: Error waiting for notbusy
  2143. [ 1311.795562] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2144. [ 1311.795684] Couldn't send ch id 22
  2145. [ 1313.793823] msm_i2c msm_i2c.0: Error waiting for notbusy
  2146. [ 1313.794036] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2147. [ 1313.794311] Couldn't send ch id 21
  2148. [ 1315.791900] msm_i2c msm_i2c.0: Error waiting for notbusy
  2149. [ 1315.792114] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2150. [ 1315.792419] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2151. [ 1317.826324] msm_i2c msm_i2c.0: Error waiting for notbusy
  2152. [ 1317.826538] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2153. [ 1317.826843] Couldn't send ch id 40
  2154. [ 1319.814514] msm_i2c msm_i2c.0: Error waiting for notbusy
  2155. [ 1319.814697] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2156. [ 1319.814849] Couldn't send ch id 70
  2157. [ 1321.803009] msm_i2c msm_i2c.0: Error waiting for notbusy
  2158. [ 1321.803192] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2159. [ 1321.803497] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2160. [ 1323.868347] msm_i2c msm_i2c.0: Error waiting for notbusy
  2161. [ 1323.868530] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2162. [ 1323.868835] micropklt_read: error while asking for data address 66,33: -16
  2163. [ 1323.868988] microp-klt: Setting lcd-backlight brightness to: 0x00
  2164. [ 1325.856536] msm_i2c msm_i2c.0: Error waiting for notbusy
  2165. [ 1325.856750] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2166. [ 1325.856872] Couldn't send ch id 70
  2167. [ 1327.855072] msm_i2c msm_i2c.0: Error waiting for notbusy
  2168. [ 1327.855285] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2169. [ 1327.855590] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2170. [ 1329.843200] msm_i2c msm_i2c.0: Error waiting for notbusy
  2171. [ 1329.843414] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2172. [ 1329.843536] Couldn't send ch id 22
  2173. [ 1331.841888] msm_i2c msm_i2c.0: Error waiting for notbusy
  2174. [ 1331.842102] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2175. [ 1331.842376] Couldn't send ch id 70
  2176. [ 1333.830200] msm_i2c msm_i2c.0: Error waiting for notbusy
  2177. [ 1333.830413] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2178. [ 1333.830718] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2179. [ 1335.868408] msm_i2c msm_i2c.0: Error waiting for notbusy
  2180. [ 1335.868621] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2181. [ 1335.868927] micropklt_read: error while asking for data address 66,33: -16
  2182. [ 1335.869079] microp-klt: Setting lcd-backlight brightness to: 0x00
  2183. [ 1337.857055] msm_i2c msm_i2c.0: Error waiting for notbusy
  2184. [ 1337.857269] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2185. [ 1337.857543] Couldn't send ch id 70
  2186. [ 1339.845428] msm_i2c msm_i2c.0: Error waiting for notbusy
  2187. [ 1339.845611] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2188. [ 1339.845916] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2189. [ 1341.879119] msm_i2c msm_i2c.0: Error waiting for notbusy
  2190. [ 1341.879333] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2191. [ 1341.879455] Couldn't send ch id 22
  2192. [ 1343.877502] msm_i2c msm_i2c.0: Error waiting for notbusy
  2193. [ 1343.877685] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2194. [ 1343.877960] Couldn't send ch id 70
  2195. [ 1345.876129] msm_i2c msm_i2c.0: Error waiting for notbusy
  2196. [ 1345.876342] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2197. [ 1345.876647] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2198. [ 1347.864868] msm_i2c msm_i2c.0: Error waiting for notbusy
  2199. [ 1347.865051] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2200. [ 1347.865203] Couldn't send ch id 40
  2201. [ 1347.868682] request_suspend_state: sleep (0->3) at 1332210000000 (2010-02-07 17:30:03.930000000 UTC)
  2202. [ 1347.868927] Sending arm9_low_speed 2
  2203. [ 1349.920867] msm_i2c msm_i2c.0: Error waiting for notbusy
  2204. [ 1349.921051] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2205. [ 1349.921295] Couldn't send ch id 70
  2206. [ 1351.919464] msm_i2c msm_i2c.0: Error waiting for notbusy
  2207. [ 1351.919647] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2208. [ 1351.919891] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2209. [ 1353.204132] msmfb_pan_display timeout waiting for frame start, 1 1
  2210. [ 1354.037567] msm_i2c msm_i2c.0: Error waiting for notbusy
  2211. [ 1354.037719] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2212. [ 1354.037963] Couldn't send ch id 70
  2213. [ 1356.026123] msm_i2c msm_i2c.0: Error waiting for notbusy
  2214. [ 1356.026306] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2215. [ 1356.026550] kionix-kxsd9: kxsd9_work: error -16
  2216. [ 1358.074279] msm_i2c msm_i2c.0: Error waiting for notbusy
  2217. [ 1358.074462] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2218. [ 1358.074707] Couldn't send ch id 70
  2219. [ 1358.285156] msmfb_pan_display timeout waiting for frame start, 1 1
  2220. [ 1360.087066] msm_i2c msm_i2c.0: Error waiting for notbusy
  2221. [ 1360.087188] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2222. [ 1360.087341] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2223. [ 1362.124053] msm_i2c msm_i2c.0: Error waiting for notbusy
  2224. [ 1362.124206] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2225. [ 1362.124267] Couldn't send ch id 70
  2226. [ 1363.369140] msmfb_pan_display timeout waiting for frame start, 1 1
  2227. [ 1364.132476] msm_i2c msm_i2c.0: Error waiting for notbusy
  2228. [ 1364.132659] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2229. [ 1364.132781] Couldn't send ch id 70
  2230. [ 1366.150970] msm_i2c msm_i2c.0: Error waiting for notbusy
  2231. [ 1366.151153] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2232. [ 1366.151275] Couldn't send ch id 70
  2233. [ 1368.159515] msm_i2c msm_i2c.0: Error waiting for notbusy
  2234. [ 1368.159729] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2235. [ 1368.159820] Couldn't send ch id 70
  2236. [ 1370.216705] msm_i2c msm_i2c.0: Error waiting for notbusy
  2237. [ 1370.216888] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2238. [ 1370.217010] Couldn't send ch id 70
  2239. [ 1372.225372] msm_i2c msm_i2c.0: Error waiting for notbusy
  2240. [ 1372.225585] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2241. [ 1372.225677] Couldn't send ch id 70
  2242. [ 1374.233703] msm_i2c msm_i2c.0: Error waiting for notbusy
  2243. [ 1374.233917] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2244. [ 1374.234008] Couldn't send ch id 70
  2245. [ 1376.241882] msm_i2c msm_i2c.0: Error waiting for notbusy
  2246. [ 1376.242095] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2247. [ 1376.242187] Couldn't send ch id 70
  2248. [ 1378.260589] msm_i2c msm_i2c.0: Error waiting for notbusy
  2249. [ 1378.260803] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2250. [ 1378.260894] Couldn't send ch id 70
  2251. [ 1380.317871] msm_i2c msm_i2c.0: Error waiting for notbusy
  2252. [ 1380.318115] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2253. [ 1380.318206] Couldn't send ch id 70
  2254. [ 1382.326446] msm_i2c msm_i2c.0: Error waiting for notbusy
  2255. [ 1382.326660] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2256. [ 1382.326751] Couldn't send ch id 70
  2257. [ 1384.334716] msm_i2c msm_i2c.0: Error waiting for notbusy
  2258. [ 1384.334930] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2259. [ 1384.335021] Couldn't send ch id 70
  2260. [ 1386.342895] msm_i2c msm_i2c.0: Error waiting for notbusy
  2261. [ 1386.343109] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2262. [ 1386.343200] Couldn't send ch id 70
  2263. [ 1388.361633] msm_i2c msm_i2c.0: Error waiting for notbusy
  2264. [ 1388.361846] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2265. [ 1388.361938] Couldn't send ch id 70
  2266. [ 1390.418670] msm_i2c msm_i2c.0: Error waiting for notbusy
  2267. [ 1390.418884] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2268. [ 1390.418975] Couldn't send ch id 70
  2269. [ 1392.427429] msm_i2c msm_i2c.0: Error waiting for notbusy
  2270. [ 1392.427642] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2271. [ 1392.427734] Couldn't send ch id 70
  2272. [ 1394.435638] msm_i2c msm_i2c.0: Error waiting for notbusy
  2273. [ 1394.435821] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2274. [ 1394.435943] Couldn't send ch id 70
  2275. [ 1396.453887] msm_i2c msm_i2c.0: Error waiting for notbusy
  2276. [ 1396.454101] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2277. [ 1396.454193] Couldn't send ch id 70
  2278. [ 1398.472564] msm_i2c msm_i2c.0: Error waiting for notbusy
  2279. [ 1398.472747] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2280. [ 1398.472839] Couldn't send ch id 70
  2281. [ 1400.540222] msm_i2c msm_i2c.0: Error waiting for notbusy
  2282. [ 1400.540435] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2283. [ 1400.540527] Couldn't send ch id 70
  2284. [ 1402.548858] msm_i2c msm_i2c.0: Error waiting for notbusy
  2285. [ 1402.549072] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2286. [ 1402.549163] Couldn't send ch id 70
  2287. [ 1404.560455] msm_i2c msm_i2c.0: Error waiting for notbusy
  2288. [ 1404.560668] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2289. [ 1404.560760] Couldn't send ch id 70
  2290. [ 1406.582397] msm_i2c msm_i2c.0: Error waiting for notbusy
  2291. [ 1406.582580] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2292. [ 1406.582641] Couldn't send ch id 70
  2293. [ 1408.591003] msm_i2c msm_i2c.0: Error waiting for notbusy
  2294. [ 1408.591186] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2295. [ 1408.591247] Couldn't send ch id 70
  2296. [ 1409.715637] msmfb_pan_display timeout waiting for frame start, 1 1
  2297. [ 1410.648437] msm_i2c msm_i2c.0: Error waiting for notbusy
  2298. [ 1410.648590] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2299. [ 1410.648681] Couldn't send ch id 70
  2300. [ 1412.671447] msm_i2c msm_i2c.0: Error waiting for notbusy
  2301. [ 1412.671630] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2302. [ 1412.671691] Couldn't send ch id 70
  2303. [ 1414.679626] msm_i2c msm_i2c.0: Error waiting for notbusy
  2304. [ 1414.679809] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2305. [ 1414.679870] Couldn't send ch id 70
  2306. [ 1414.800201] msmfb_pan_display timeout waiting for frame start, 1 1
  2307. [ 1416.687866] msm_i2c msm_i2c.0: Error waiting for notbusy
  2308. [ 1416.688079] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2309. [ 1416.688171] Couldn't send ch id 70
  2310. [ 1418.706481] msm_i2c msm_i2c.0: Error waiting for notbusy
  2311. [ 1418.706695] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2312. [ 1418.706787] Couldn't send ch id 70
  2313. [ 1420.774017] msm_i2c msm_i2c.0: Error waiting for notbusy
  2314. [ 1420.774200] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2315. [ 1420.774322] Couldn't send ch id 70
  2316. [ 1422.786956] msm_i2c msm_i2c.0: Error waiting for notbusy
  2317. [ 1422.787170] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2318. [ 1422.787261] Couldn't send ch id 70
  2319. [ 1424.795196] msm_i2c msm_i2c.0: Error waiting for notbusy
  2320. [ 1424.795410] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2321. [ 1424.795501] Couldn't send ch id 70
  2322. [ 1426.803436] msm_i2c msm_i2c.0: Error waiting for notbusy
  2323. [ 1426.803619] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2324. [ 1426.803741] Couldn't send ch id 70
  2325. [ 1428.822052] msm_i2c msm_i2c.0: Error waiting for notbusy
  2326. [ 1428.822265] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2327. [ 1428.822357] Couldn't send ch id 70
  2328. [ 1430.881927] msm_i2c msm_i2c.0: Error waiting for notbusy
  2329. [ 1430.882110] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2330. [ 1430.882232] Couldn't send ch id 70
  2331. [ 1432.890380] msm_i2c msm_i2c.0: Error waiting for notbusy
  2332. [ 1432.890594] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2333. [ 1432.890686] Couldn't send ch id 70
  2334. [ 1434.898742] msm_i2c msm_i2c.0: Error waiting for notbusy
  2335. [ 1434.898956] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2336. [ 1434.899047] Couldn't send ch id 70
  2337. [ 1436.906951] msm_i2c msm_i2c.0: Error waiting for notbusy
  2338. [ 1436.907165] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2339. [ 1436.907257] Couldn't send ch id 70
  2340. [ 1438.925689] msm_i2c msm_i2c.0: Error waiting for notbusy
  2341. [ 1438.925903] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2342. [ 1438.926025] Couldn't send ch id 70
  2343. [ 1440.983398] msm_i2c msm_i2c.0: Error waiting for notbusy
  2344. [ 1440.983581] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2345. [ 1440.983703] Couldn't send ch id 70
  2346. [ 1442.991912] msm_i2c msm_i2c.0: Error waiting for notbusy
  2347. [ 1442.992126] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2348. [ 1442.992218] Couldn't send ch id 70
  2349. [ 1445.000183] msm_i2c msm_i2c.0: Error waiting for notbusy
  2350. [ 1445.000396] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2351. [ 1445.000488] Couldn't send ch id 70
  2352. [ 1447.008361] msm_i2c msm_i2c.0: Error waiting for notbusy
  2353. [ 1447.008575] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2354. [ 1447.008666] Couldn't send ch id 70
  2355. [ 1449.027069] msm_i2c msm_i2c.0: Error waiting for notbusy
  2356. [ 1449.027282] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2357. [ 1449.027374] Couldn't send ch id 70
  2358. [ 1451.084472] msm_i2c msm_i2c.0: Error waiting for notbusy
  2359. [ 1451.084686] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2360. [ 1451.084777] Couldn't send ch id 70
  2361. [ 1453.092987] msm_i2c msm_i2c.0: Error waiting for notbusy
  2362. [ 1453.093170] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2363. [ 1453.093261] Couldn't send ch id 70
  2364. [ 1455.101165] msm_i2c msm_i2c.0: Error waiting for notbusy
  2365. [ 1455.101379] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2366. [ 1455.101470] Couldn't send ch id 70
  2367. [ 1457.109313] msm_i2c msm_i2c.0: Error waiting for notbusy
  2368. [ 1457.109527] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2369. [ 1457.109619] Couldn't send ch id 70
  2370. [ 1459.127929] msm_i2c msm_i2c.0: Error waiting for notbusy
  2371. [ 1459.128143] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2372. [ 1459.128234] Couldn't send ch id 70
  2373. [ 1461.185424] msm_i2c msm_i2c.0: Error waiting for notbusy
  2374. [ 1461.185607] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2375. [ 1461.185729] Couldn't send ch id 70
  2376. [ 1463.194000] msm_i2c msm_i2c.0: Error waiting for notbusy
  2377. [ 1463.194213] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2378. [ 1463.194305] Couldn't send ch id 70
  2379. [ 1465.212951] msm_i2c msm_i2c.0: Error waiting for notbusy
  2380. [ 1465.213165] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2381. [ 1465.213256] Couldn't send ch id 70
  2382. [ 1467.227508] msm_i2c msm_i2c.0: Error waiting for notbusy
  2383. [ 1467.227691] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2384. [ 1467.227752] Couldn't send ch id 70
  2385. [ 1469.236145] msm_i2c msm_i2c.0: Error waiting for notbusy
  2386. [ 1469.236328] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2387. [ 1469.236389] Couldn't send ch id 70
  2388. [ 1470.310516] msmfb_pan_display timeout waiting for frame start, 1 1
  2389. [ 1471.293823] msm_i2c msm_i2c.0: Error waiting for notbusy
  2390. [ 1471.293975] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2391. [ 1471.294067] Couldn't send ch id 70
  2392. [ 1473.302368] msm_i2c msm_i2c.0: Error waiting for notbusy
  2393. [ 1473.302551] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2394. [ 1473.302612] Couldn't send ch id 70
  2395. [ 1475.310638] msm_i2c msm_i2c.0: Error waiting for notbusy
  2396. [ 1475.310821] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2397. [ 1475.310882] Couldn't send ch id 70
  2398. [ 1475.390991] msmfb_pan_display timeout waiting for frame start, 1 1
  2399. [ 1477.318847] msm_i2c msm_i2c.0: Error waiting for notbusy
  2400. [ 1477.319061] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2401. [ 1477.319152] Couldn't send ch id 70
  2402. [ 1479.337554] msm_i2c msm_i2c.0: Error waiting for notbusy
  2403. [ 1479.337768] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2404. [ 1479.337860] Couldn't send ch id 70
  2405. [ 1481.424468] msm_i2c msm_i2c.0: Error waiting for notbusy
  2406. [ 1481.424682] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2407. [ 1481.424774] Couldn't send ch id 70
  2408. [ 1483.437347] msm_i2c msm_i2c.0: Error waiting for notbusy
  2409. [ 1483.437561] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2410. [ 1483.437652] Couldn't send ch id 70
  2411. [ 1485.445587] msm_i2c msm_i2c.0: Error waiting for notbusy
  2412. [ 1485.445800] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2413. [ 1485.445892] Couldn't send ch id 70
  2414. [ 1487.453765] msm_i2c msm_i2c.0: Error waiting for notbusy
  2415. [ 1487.453979] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2416. [ 1487.454071] Couldn't send ch id 70
  2417. [ 1489.462310] msm_i2c msm_i2c.0: Error waiting for notbusy
  2418. [ 1489.462524] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2419. [ 1489.462615] Couldn't send ch id 70
  2420. [ 1491.529602] msm_i2c msm_i2c.0: Error waiting for notbusy
  2421. [ 1491.529815] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2422. [ 1491.529907] Couldn't send ch id 70
  2423. [ 1493.542449] msm_i2c msm_i2c.0: Error waiting for notbusy
  2424. [ 1493.542663] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2425. [ 1493.542755] Couldn't send ch id 70
  2426. [ 1495.550689] msm_i2c msm_i2c.0: Error waiting for notbusy
  2427. [ 1495.550903] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2428. [ 1495.550994] Couldn't send ch id 70
  2429. [ 1497.558959] msm_i2c msm_i2c.0: Error waiting for notbusy
  2430. [ 1497.559173] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2431. [ 1497.559265] Couldn't send ch id 70
  2432. [ 1499.577575] msm_i2c msm_i2c.0: Error waiting for notbusy
  2433. [ 1499.577789] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2434. [ 1499.577880] Couldn't send ch id 70
  2435. [ 1501.635314] msm_i2c msm_i2c.0: Error waiting for notbusy
  2436. [ 1501.635498] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2437. [ 1501.635620] Couldn't send ch id 70
  2438. [ 1503.648071] msm_i2c msm_i2c.0: Error waiting for notbusy
  2439. [ 1503.648284] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2440. [ 1503.648376] Couldn't send ch id 70
  2441. [ 1505.656402] msm_i2c msm_i2c.0: Error waiting for notbusy
  2442. [ 1505.656616] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2443. [ 1505.656707] Couldn't send ch id 70
  2444. [ 1507.664550] msm_i2c msm_i2c.0: Error waiting for notbusy
  2445. [ 1507.664764] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2446. [ 1507.664855] Couldn't send ch id 70
  2447. [ 1509.683227] msm_i2c msm_i2c.0: Error waiting for notbusy
  2448. [ 1509.683410] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2449. [ 1509.683532] Couldn't send ch id 70
  2450. [ 1511.740600] msm_i2c msm_i2c.0: Error waiting for notbusy
  2451. [ 1511.740783] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2452. [ 1511.740905] Couldn't send ch id 70
  2453. [ 1513.749176] msm_i2c msm_i2c.0: Error waiting for notbusy
  2454. [ 1513.749389] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2455. [ 1513.749481] Couldn't send ch id 70
  2456. [ 1515.757324] msm_i2c msm_i2c.0: Error waiting for notbusy
  2457. [ 1515.757537] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2458. [ 1515.757659] Couldn't send ch id 70
  2459. [ 1517.765594] msm_i2c msm_i2c.0: Error waiting for notbusy
  2460. [ 1517.765777] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2461. [ 1517.765899] Couldn't send ch id 70
  2462. [ 1519.784545] msm_i2c msm_i2c.0: Error waiting for notbusy
  2463. [ 1519.784759] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2464. [ 1519.784851] Couldn't send ch id 70
  2465. [ 1521.793060] msm_i2c msm_i2c.0: Error waiting for notbusy
  2466. [ 1521.793273] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2467. [ 1521.793365] Couldn't send ch id 70
  2468. [ 1523.868743] msm_i2c msm_i2c.0: Error waiting for notbusy
  2469. [ 1523.868927] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2470. [ 1523.869201] Couldn't send ch id 70
  2471. [ 1525.867706] msm_i2c msm_i2c.0: Error waiting for notbusy
  2472. [ 1525.867889] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2473. [ 1525.868041] Couldn't send ch id 40
  2474. [ 1525.870544] request_suspend_state: wakeup (3->0) at 1508430000000 (2010-02-07 17:33:00.150000000 UTC)
  2475. [ 1525.875732] microp-klt: Setting lcd-backlight brightness to: 0x00
  2476. [ 1527.855957] msm_i2c msm_i2c.0: Error waiting for notbusy
  2477. [ 1527.856140] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2478. [ 1527.856414] Couldn't send ch id 70
  2479. [ 1527.861480] usb: suspend
  2480. [ 1529.844329] msm_i2c msm_i2c.0: Error waiting for notbusy
  2481. [ 1529.844543] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2482. [ 1529.844665] Couldn't send ch id 22
  2483. [ 1531.530426] usb: reset
  2484. [ 1531.532684] usb: portchange USB_SPEED_HIGH
  2485. [ 1531.563507] init: untracked pid 1776 exited
  2486. [ 1531.580261] usb: reset
  2487. [ 1531.582519] usb: portchange USB_SPEED_HIGH
  2488. [ 1531.687072] usb_mass_storage usb_mass_storage: config #1
  2489. [ 1531.920684] msm_i2c msm_i2c.0: Error waiting for notbusy
  2490. [ 1531.920867] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2491. [ 1531.921173] Couldn't send ch id 70
  2492. [ 1533.913421] msm_i2c msm_i2c.0: Error waiting for notbusy
  2493. [ 1533.913635] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2494. [ 1533.913757] Couldn't send ch id 40
  2495. [ 1535.912841] msm_i2c msm_i2c.0: Error waiting for notbusy
  2496. [ 1535.913024] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2497. [ 1535.913299] Couldn't send ch id 70
  2498. [ 1535.943023] msmfb: panel awake
  2499. [ 1535.943176] msmfb: panel sleeping
  2500. [ 1535.974121] epson_blank
  2501. [ 1535.974212] init epson blank
  2502. [ 1537.900848] msm_i2c msm_i2c.0: Error waiting for notbusy
  2503. [ 1537.901062] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2504. [ 1537.901184] Couldn't send ch id 40
  2505. [ 1539.924682] msm_i2c msm_i2c.0: Error waiting for notbusy
  2506. [ 1539.924896] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2507. [ 1539.925170] Couldn't send ch id 70
  2508. [ 1541.912689] msm_i2c msm_i2c.0: Error waiting for notbusy
  2509. [ 1541.912902] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2510. [ 1541.913177] kionix-kxsd9: kxsd9_work: error -16
  2511. [ 1543.911590] msm_i2c msm_i2c.0: Error waiting for notbusy
  2512. [ 1543.911804] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2513. [ 1543.912078] micropklt_read: error while asking for data address 66,33: -16
  2514. [ 1545.899688] msm_i2c msm_i2c.0: Error waiting for notbusy
  2515. [ 1545.899902] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2516. [ 1545.900207] Couldn't send ch id 70
  2517. [ 1547.887695] msm_i2c msm_i2c.0: Error waiting for notbusy
  2518. [ 1547.887908] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2519. [ 1547.888214] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2520. [ 1549.922943] msm_i2c msm_i2c.0: Error waiting for notbusy
  2521. [ 1549.923156] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2522. [ 1549.923461] Couldn't send ch id 40
  2523. [ 1549.924072] request_suspend_state: wakeup (0->0) at 1532250000000 (2010-02-07 17:33:23.970000000 UTC)
  2524. [ 1551.992492] msm_i2c msm_i2c.0: Error waiting for notbusy
  2525. [ 1551.992706] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2526. [ 1551.992980] Couldn't send ch id 70
  2527. [ 1553.980804] msm_i2c msm_i2c.0: Error waiting for notbusy
  2528. [ 1553.981018] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2529. [ 1553.981323] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2530. [ 1556.022644] msm_i2c msm_i2c.0: Error waiting for notbusy
  2531. [ 1556.022827] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2532. [ 1556.023132] micropklt_read: error while asking for data address 66,33: -16
  2533. [ 1556.023284] microp-klt: Setting lcd-backlight brightness to: 0x00
  2534. [ 1558.010711] msm_i2c msm_i2c.0: Error waiting for notbusy
  2535. [ 1558.010894] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2536. [ 1558.011169] Couldn't send ch id 70
  2537. [ 1560.009002] msm_i2c msm_i2c.0: Error waiting for notbusy
  2538. [ 1560.009216] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2539. [ 1560.009521] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2540. [ 1562.001098] msm_i2c msm_i2c.0: Error waiting for notbusy
  2541. [ 1562.001312] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2542. [ 1562.001434] Couldn't send ch id 22
  2543. [ 1562.052337] microp-klt: Setting lcd-backlight brightness to: 0x00
  2544. [ 1564.005218] msm_i2c msm_i2c.0: Error waiting for notbusy
  2545. [ 1564.005432] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2546. [ 1564.005706] Couldn't send ch id 70
  2547. [ 1565.993377] msm_i2c msm_i2c.0: Error waiting for notbusy
  2548. [ 1565.993591] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2549. [ 1565.993865] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2550. [ 1568.031707] msm_i2c msm_i2c.0: Error waiting for notbusy
  2551. [ 1568.031921] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2552. [ 1568.032043] Couldn't send ch id 22
  2553. [ 1570.020172] msm_i2c msm_i2c.0: Error waiting for notbusy
  2554. [ 1570.020385] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2555. [ 1570.020660] Couldn't send ch id 70
  2556. [ 1572.008270] msm_i2c msm_i2c.0: Error waiting for notbusy
  2557. [ 1572.008483] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2558. [ 1572.008758] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2559. [ 1573.997009] msm_i2c msm_i2c.0: Error waiting for notbusy
  2560. [ 1573.997222] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2561. [ 1573.997497] Couldn't send ch id 40
  2562. [ 1573.999084] microp-klt: Setting lcd-backlight brightness to: 0x00
  2563. [ 1575.985168] msm_i2c msm_i2c.0: Error waiting for notbusy
  2564. [ 1575.985382] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2565. [ 1575.985656] Couldn't send ch id 70
  2566. [ 1577.973236] msm_i2c msm_i2c.0: Error waiting for notbusy
  2567. [ 1577.973449] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2568. [ 1577.973754] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2569. [ 1580.015136] msm_i2c msm_i2c.0: Error waiting for notbusy
  2570. [ 1580.015350] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2571. [ 1580.015472] Couldn't send ch id 22
  2572. [ 1580.045989] microp-klt: Setting lcd-backlight brightness to: 0x00
  2573. [ 1582.024353] msm_i2c msm_i2c.0: Error waiting for notbusy
  2574. [ 1582.024536] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2575. [ 1582.024810] Couldn't send ch id 70
  2576. [ 1584.011810] msm_i2c msm_i2c.0: Error waiting for notbusy
  2577. [ 1584.012023] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2578. [ 1584.012298] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2579. [ 1586.049896] msm_i2c msm_i2c.0: Error waiting for notbusy
  2580. [ 1586.050109] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2581. [ 1586.050231] Couldn't send ch id 22
  2582. [ 1586.080841] microp-klt: Setting lcd-backlight brightness to: 0x00
  2583. [ 1588.045104] msm_i2c msm_i2c.0: Error waiting for notbusy
  2584. [ 1588.045318] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2585. [ 1588.045593] Couldn't send ch id 21
  2586. [ 1588.045715] blackstone panel deinit
  2587. [ 1588.107543] epson_suspend
  2588. [ 1588.108306] epson_resume
  2589. [ 1588.108367] msmfb: panel waking
  2590. [ 1588.108428] msmfb: ready, waiting for full update
  2591. [ 1588.108489] Sending arm9_low_speed 7
  2592. [ 1590.033416] msm_i2c msm_i2c.0: Error waiting for notbusy
  2593. [ 1590.033630] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2594. [ 1590.033935] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2595. [ 1592.021545] msm_i2c msm_i2c.0: Error waiting for notbusy
  2596. [ 1592.021759] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2597. [ 1592.021881] Couldn't send ch id 22
  2598. [ 1594.009582] msm_i2c msm_i2c.0: Error waiting for notbusy
  2599. [ 1594.009796] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2600. [ 1594.009948] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2601. [ 1596.062744] msm_i2c msm_i2c.0: Error waiting for notbusy
  2602. [ 1596.062957] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2603. [ 1596.063079] Couldn't send ch id 40
  2604. [ 1596.064605] request_suspend_state: sleep (0->3) at 1577870000000 (2010-02-07 17:34:09.590000000 UTC)
  2605. [ 1596.064849] Sending arm9_low_speed 2
  2606. [ 1596.065002] msmfb: panel sleeping
  2607. [ 1596.096038] epson_blank
  2608. [ 1596.096130] init epson blank
  2609. [ 1598.089050] msm_i2c msm_i2c.0: Error waiting for notbusy
  2610. [ 1598.089263] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2611. [ 1598.089569] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2612. [ 1600.089813] msm_i2c msm_i2c.0: Error waiting for notbusy
  2613. [ 1600.090026] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2614. [ 1600.090301] Couldn't send ch id 70
  2615. [ 1602.088409] msm_i2c msm_i2c.0: Error waiting for notbusy
  2616. [ 1602.088623] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2617. [ 1602.088928] kionix-kxsd9: kxsd9_work: error -16
  2618. [ 1604.124572] msm_i2c msm_i2c.0: Error waiting for notbusy
  2619. [ 1604.124786] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2620. [ 1604.125061] Couldn't send ch id 70
  2621. [ 1606.122985] msm_i2c msm_i2c.0: Error waiting for notbusy
  2622. [ 1606.123199] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2623. [ 1606.123504] kxsd9_i2c_read: error asking for gsensor data at address 19,00: -16
  2624. [ 1608.165618] msm_i2c msm_i2c.0: Error waiting for notbusy
  2625. [ 1608.165832] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2626. [ 1608.165924] Couldn't send ch id 70
  2627. [ 1610.174255] msm_i2c msm_i2c.0: Error waiting for notbusy
  2628. [ 1610.174438] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2629. [ 1610.174560] Couldn't send ch id 70
  2630. [ 1612.183258] msm_i2c msm_i2c.0: Error waiting for notbusy
  2631. [ 1612.183471] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2632. [ 1612.183563] Couldn't send ch id 70
  2633. [ 1614.240966] msm_i2c msm_i2c.0: Error waiting for notbusy
  2634. [ 1614.241180] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2635. [ 1614.241271] Couldn't send ch id 70
  2636. [ 1616.259643] msm_i2c msm_i2c.0: Error waiting for notbusy
  2637. [ 1616.259857] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2638. [ 1616.259979] Couldn't send ch id 70
  2639. [ 1618.268127] msm_i2c msm_i2c.0: Error waiting for notbusy
  2640. [ 1618.268341] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2641. [ 1618.268432] Couldn't send ch id 70
  2642. [ 1620.286743] msm_i2c msm_i2c.0: Error waiting for notbusy
  2643. [ 1620.286956] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 100
  2644. [ 1620.287048] Couldn't send ch id 21
  2645. [ 1620.287170] blackstone panel deinit
  2646. [ 1620.349060] epson_suspend
  2647. [ 1620.360107] active wake lock vbus_present
  2648. [ 1620.360198] wake lock mmc_delayed_work, expired
  2649. [ 1620.360290] wake lock SMD_DS, expired
  2650. [ 1620.360351] wake lock tiwlan_rx_wake, expired
create new paste | create new version of this paste RAW Paste Data