API tools faq
paste
Advertisement
Guest User

dmesg output

a guest
Jan 5th, 2013
416
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.88 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpu
  2. [ 0.000000] Linux version 3.2.27+ (dc4@dc4-arm-01) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #250 PREEMPT Thu Oct 18 19:03:02 BST 2012
  3. [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  5. [ 0.000000] Machine: BCM2708
  6. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  7. [ 0.000000] On node 0 totalpages: 114688
  8. [ 0.000000] free_area_init_node: node 0, pgdat c050db28, node_mem_map c05b6000
  9. [ 0.000000] Normal zone: 896 pages used for memmap
  10. [ 0.000000] Normal zone: 0 pages reserved
  11. [ 0.000000] Normal zone: 113792 pages, LIFO batch:31
  12. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  13. [ 0.000000] pcpu-alloc: [0] 0
  14. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  15. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xf bcm2708.serial=0xac9804ca smsc95xx.macaddr=B8:27:EB:98:04:CA sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1c000000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
  16. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  17. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  18. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  19. [ 0.000000] Memory: 448MB = 448MB total
  20. [ 0.000000] Memory: 448872k/448872k available, 9880k reserved, 0K highmem
  21. [ 0.000000] Virtual kernel memory layout:
  22. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  23. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  24. [ 0.000000] vmalloc : 0xdc800000 - 0xe8000000 ( 184 MB)
  25. [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  26. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  27. [ 0.000000] .text : 0xc0008000 - 0xc04c0e78 (4836 kB)
  28. [ 0.000000] .init : 0xc04c1000 - 0xc04e0b10 ( 127 kB)
  29. [ 0.000000] .data : 0xc04e2000 - 0xc050e1c0 ( 177 kB)
  30. [ 0.000000] .bss : 0xc050e1e4 - 0xc05b5128 ( 668 kB)
  31. [ 0.000000] NR_IRQS:330
  32. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  33. [ 0.000000] timer_set_mode: unhandled mode:1
  34. [ 0.000000] timer_set_mode: unhandled mode:3
  35. [ 0.000000] Console: colour dummy device 80x30
  36. [ 0.000000] console [tty1] enabled
  37. [ 0.000948] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
  38. [ 0.060149] pid_max: default: 32768 minimum: 301
  39. [ 0.060630] Mount-cache hash table entries: 512
  40. [ 0.061123] Initializing cgroup subsys cpuacct
  41. [ 0.061215] Initializing cgroup subsys devices
  42. [ 0.061252] Initializing cgroup subsys freezer
  43. [ 0.061282] Initializing cgroup subsys blkio
  44. [ 0.061425] CPU: Testing write buffer coherency: ok
  45. [ 0.061762] hw perfevents: enabled with v6 PMU driver, 3 counters available
  46. [ 0.062975] devtmpfs: initialized
  47. [ 0.073355] NET: Registered protocol family 16
  48. [ 0.074054] bcm2708.uart_clock = 0
  49. [ 0.075671] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  50. [ 0.075728] hw-breakpoint: maximum watchpoint size is 4 bytes.
  51. [ 0.075766] mailbox: Broadcom VideoCore Mailbox driver
  52. [ 0.075873] bcm2708_vcio: mailbox at f200b880
  53. [ 0.075978] bcm_power: Broadcom power driver
  54. [ 0.076017] bcm_power_open() -> 0
  55. [ 0.076043] bcm_power_request(0, 8)
  56. [ 0.576721] bcm_mailbox_read -> 00000080, 0
  57. [ 0.576760] bcm_power_request -> 0
  58. [ 0.576786] Serial: AMBA PL011 UART driver
  59. [ 0.576943] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
  60. [ 0.886881] console [ttyAMA0] enabled
  61. [ 0.912390] bio: create slab <bio-0> at 0
  62. [ 0.917599] SCSI subsystem initialized
  63. [ 0.921599] usbcore: registered new interface driver usbfs
  64. [ 0.927329] usbcore: registered new interface driver hub
  65. [ 0.932909] usbcore: registered new device driver usb
  66. [ 0.938951] Switching to clocksource stc
  67. [ 0.943197] FS-Cache: Loaded
  68. [ 0.946377] CacheFiles: Loaded
  69. [ 0.963135] NET: Registered protocol family 2
  70. [ 0.967970] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  71. [ 0.976142] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  72. [ 0.984180] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  73. [ 0.991131] TCP: Hash tables configured (established 16384 bind 16384)
  74. [ 0.997741] TCP reno registered
  75. [ 1.000914] UDP hash table entries: 256 (order: 0, 4096 bytes)
  76. [ 1.006829] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  77. [ 1.013643] NET: Registered protocol family 1
  78. [ 1.018782] RPC: Registered named UNIX socket transport module.
  79. [ 1.024920] RPC: Registered udp transport module.
  80. [ 1.029645] RPC: Registered tcp transport module.
  81. [ 1.034399] RPC: Registered tcp NFSv4.1 backchannel transport module.
  82. [ 1.041145] bcm2708_dma: DMA manager at dc808000
  83. [ 1.045943] bcm2708_gpio: bcm2708_gpio_probe c04e9c18
  84. [ 1.051401] vc-mem: phys_addr:0x00000000 mem_base=0x1c000000 mem_size:0x20000000(512 MiB)
  85. [ 1.060699] audit: initializing netlink socket (disabled)
  86. [ 1.066251] type=2000 audit(0.750:1): initialized
  87. [ 1.182352] VFS: Disk quotas dquot_6.5.2
  88. [ 1.186598] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  89. [ 1.194141] FS-Cache: Netfs 'nfs' registered for caching
  90. [ 1.200398] msgmni has been set to 876
  91. [ 1.206255] io scheduler noop registered
  92. [ 1.210226] io scheduler deadline registered (default)
  93. [ 1.215670] io scheduler cfq registered
  94. [ 1.238418] Console: switching to colour frame buffer device 82x26
  95. [ 1.250729] kgdb: Registered I/O driver kgdboc.
  96. [ 1.267189] brd: module loaded
  97. [ 1.277558] loop: module loaded
  98. [ 1.283735] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
  99. [ 1.293484] vcos: [1]: vchiq_init_state: called
  100. [ 1.301151] vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0
  101. [ 1.311197] usbcore: registered new interface driver smsc95xx
  102. [ 1.319313] cdc_ncm: 04-Aug-2011
  103. [ 1.324954] usbcore: registered new interface driver cdc_ncm
  104. [ 1.332818] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  105. [ 1.545940] Core Release: 2.80a
  106. [ 1.551229] Setting default values for core params
  107. [ 1.558295] Finished setting default values for core params
  108. [ 1.771235] Using Buffer DMA mode
  109. [ 1.776729] Periodic Transfer Interrupt Enhancement - disabled
  110. [ 1.784736] Multiprocessor Interrupt Enhancement - disabled
  111. [ 1.792399] OTG VER PARAM: 0, OTG VER FLAG: 0
  112. [ 1.798941] Dedicated Tx FIFOs mode
  113. [ 1.804841] dwc_otg: Microframe scheduler enabled
  114. [ 1.804896] dwc_otg bcm2708_usb: DWC OTG Controller
  115. [ 1.812009] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  116. [ 1.821666] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  117. [ 1.829429] Init: Port Power? op_state=1
  118. [ 1.835553] Init: Power Port (0)
  119. [ 1.841009] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  120. [ 1.850072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  121. [ 1.859538] usb usb1: Product: DWC OTG Controller
  122. [ 1.866471] usb usb1: Manufacturer: Linux 3.2.27+ dwc_otg_hcd
  123. [ 1.874415] usb usb1: SerialNumber: bcm2708_usb
  124. [ 1.881947] hub 1-0:1.0: USB hub found
  125. [ 1.887940] hub 1-0:1.0: 1 port detected
  126. [ 1.894688] dwc_otg: FIQ enabled
  127. [ 1.894706] dwc_otg: NAK holdoff enabled
  128. [ 1.894727] Module dwc_common_port init
  129. [ 1.895076] usbcore: registered new interface driver uas
  130. [ 1.902434] Initializing USB Mass Storage driver...
  131. [ 1.909695] usbcore: registered new interface driver usb-storage
  132. [ 1.917858] USB Mass Storage support registered.
  133. [ 1.924842] usbcore: registered new interface driver libusual
  134. [ 1.933158] mousedev: PS/2 mouse device common for all mice
  135. [ 1.941678] bcm2835-cpufreq: min=700000 max=700000 cur=700000
  136. [ 1.947590] bcm2835-cpufreq: switching to governor powersave
  137. [ 1.955408] bcm2835-cpufreq: switching to governor powersave
  138. [ 1.963278] cpuidle: using governor ladder
  139. [ 1.971350] cpuidle: using governor menu
  140. [ 1.977337] sdhci: Secure Digital Host Controller Interface driver
  141. [ 1.985541] sdhci: Copyright(c) Pierre Ossman
  142. [ 1.991954] sdhci: Enable low-latency mode
  143. [ 1.998201] bcm_power_open() -> 1
  144. [ 2.003753] Registered led device: mmc0::
  145. [ 2.005217] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  146. [ 2.017121] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
  147. [ 2.025175] sdhci-pltfm: SDHCI platform and OF driver helper
  148. [ 2.034372] Registered led device: led0
  149. [ 2.034772] usbcore: registered new interface driver usbhid
  150. [ 2.042455] usbhid: USB HID core driver
  151. [ 2.049672] TCP cubic registered
  152. [ 2.055149] Initializing XFRM netlink socket
  153. [ 2.063695] NET: Registered protocol family 17
  154. [ 2.073474] Registering the dns_resolver key type
  155. [ 2.082498] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  156. [ 2.096672] Indeed it is in host mode hprt0 = 00021501
  157. [ 2.109281] registered taskstats version 1
  158. [ 2.133137] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  159. [ 2.153553] Waiting for root device /dev/mmcblk0p2...
  160. [ 2.173702] mmc0: new high speed SDHC card at address 1234
  161. [ 2.193028] mmcblk0: mmc0:1234 SA04G 3.63 GiB
  162. [ 2.214392] mmcblk0: p1 p2
  163. [ 2.323048] usb 1-1: new high-speed USB device number 2 using dwc_otg
  164. [ 2.332053] Indeed it is in host mode hprt0 = 00001101
  165. [ 2.533287] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
  166. [ 2.542324] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  167. [ 2.552676] hub 1-1:1.0: USB hub found
  168. [ 2.558888] hub 1-1:1.0: 3 ports detected
  169. [ 2.843111] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  170. [ 2.963515] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  171. [ 2.972738] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  172. [ 2.985551] smsc95xx v1.0.4
  173. [ 3.048338] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:98:04:ca
  174. [ 3.143151] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
  175. [ 3.264715] usb 1-1.3: New USB device found, idVendor=2109, idProduct=2812
  176. [ 3.274438] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  177. [ 3.284315] usb 1-1.3: Product: USB 2.0 HUB
  178. [ 3.284332]
  179. [ 3.296239] hub 1-1.3:1.0: USB hub found
  180. [ 3.302809] hub 1-1.3:1.0: 4 ports detected
  181. [ 3.603265] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg
  182. [ 3.724613] usb 1-1.3.1: New USB device found, idVendor=2109, idProduct=2812
  183. [ 3.734100] usb 1-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  184. [ 3.746065] usb 1-1.3.1: Product: USB 2.0 HUB
  185. [ 3.746082]
  186. [ 3.757926] hub 1-1.3.1:1.0: USB hub found
  187. [ 3.764757] hub 1-1.3.1:1.0: 4 ports detected
  188. [ 4.063231] usb 1-1.3.1.1: new high-speed USB device number 6 using dwc_otg
  189. [ 4.188591] usb 1-1.3.1.1: New USB device found, idVendor=0930, idProduct=6545
  190. [ 4.198168] usb 1-1.3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  191. [ 4.210158] usb 1-1.3.1.1: Product: DT 101 G2
  192. [ 4.216827] usb 1-1.3.1.1: Manufacturer: Kingston
  193. [ 4.223653] usb 1-1.3.1.1: SerialNumber: 001CC0EC34C8EBA186450007
  194. [ 4.233357] scsi0 : usb-storage 1-1.3.1.1:1.0
  195. [ 5.311227] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS
  196. [ 6.103207] usb 1-1.3.1.1: reset high-speed USB device number 6 using dwc_otg
  197. [ 6.457675] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  198. [ 6.465833] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  199. [ 6.474014] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  200. [ 6.482033] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  201. [ 6.490116] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  202. [ 6.497747] hub 1-1.3.1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
  203. [ 6.507208] hub 1-1.3.1:1.0: cannot disable port 1 (err = -71)
  204. [ 6.515258] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  205. [ 6.523149] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  206. [ 6.530904] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  207. [ 6.538608] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  208. [ 6.546247] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  209. [ 6.553646] hub 1-1.3.1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
  210. [ 6.562783] hub 1-1.3.1:1.0: cannot disable port 1 (err = -71)
  211. [ 6.570492] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  212. [ 6.577968] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  213. [ 6.585530] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  214. [ 6.592912] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  215. [ 6.600260] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  216. [ 6.607267] hub 1-1.3.1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
  217. [ 6.616108] hub 1-1.3.1:1.0: cannot disable port 1 (err = -71)
  218. [ 6.623409] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  219. [ 6.630536] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  220. [ 6.637770] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  221. [ 6.644884] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  222. [ 6.652038] hub 1-1.3.1:1.0: cannot reset port 1 (err = -71)
  223. [ 6.658879] hub 1-1.3.1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
  224. [ 6.667659] hub 1-1.3.1:1.0: cannot disable port 1 (err = -71)
  225. [ 6.674865] hub 1-1.3.1:1.0: cannot disable port 1 (err = -71)
  226. [ 6.682163] hub 1-1.3.1:1.0: hub_port_status failed (err = -71)
  227. [ 7.083057] sd 0:0:0:0: [sda] READ CAPACITY failed
  228. [ 7.089154] sd 0:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00
  229. [ 7.096949] sd 0:0:0:0: [sda] Sense not available.
  230. [ 7.193070] sd 0:0:0:0: [sda] Write Protect is off
  231. [ 7.199182] sd 0:0:0:0: [sda] Mode Sense: 20 00 00 00
  232. [ 7.283071] sd 0:0:0:0: [sda] No Caching mode page present
  233. [ 7.289882] sd 0:0:0:0: [sda] Assuming drive cache: write through
  234. [ 7.543055] sd 0:0:0:0: [sda] READ CAPACITY failed
  235. [ 7.549289] sd 0:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00
  236. [ 7.557287] sd 0:0:0:0: [sda] Sense not available.
  237. [ 7.653155] sd 0:0:0:0: [sda] Write Protect is on
  238. [ 7.659402] sd 0:0:0:0: [sda] Mode Sense: c0 c0 c0 c2
  239. [ 7.743094] sd 0:0:0:0: [sda] No Caching mode page present
  240. [ 7.750111] sd 0:0:0:0: [sda] Assuming drive cache: write through
  241. [ 7.758085] sd 0:0:0:0: [sda] Attached SCSI removable disk
  242. [ 8.396308] usb 1-1.3: USB disconnect, device number 4
  243. [ 8.403229] usb 1-1.3.1: USB disconnect, device number 5
  244. [ 8.410263] usb 1-1.3.1.1: USB disconnect, device number 6
  245. [ 8.653206] usb 1-1.3: new high-speed USB device number 7 using dwc_otg
  246. [ 8.774575] usb 1-1.3: New USB device found, idVendor=2109, idProduct=2812
  247. [ 8.783385] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  248. [ 8.792602] usb 1-1.3: Product: USB 2.0 HUB
  249. [ 8.792617]
  250. [ 8.803532] hub 1-1.3:1.0: USB hub found
  251. [ 8.809637] hub 1-1.3:1.0: 4 ports detected
  252. [ 9.113207] usb 1-1.3.1: new high-speed USB device number 8 using dwc_otg
  253. [ 9.234631] usb 1-1.3.1: New USB device found, idVendor=2109, idProduct=2812
  254. [ 9.243745] usb 1-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  255. [ 9.255089] usb 1-1.3.1: Product: USB 2.0 HUB
  256. [ 9.255106]
  257. [ 9.266413] hub 1-1.3.1:1.0: USB hub found
  258. [ 9.272822] hub 1-1.3.1:1.0: 4 ports detected
  259. [ 9.573301] usb 1-1.3.1.1: new high-speed USB device number 9 using dwc_otg
  260. [ 13.127433] EXT4-fs (mmcblk0p2): recovery complete
  261. [ 13.138452] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  262. [ 13.150978] VFS: Mounted root (ext4 filesystem) on device 179:2.
  263. [ 13.162121] devtmpfs: mounted
  264. [ 13.169000] Freeing init memory: 124K
  265. [ 13.379406] usb 1-1.3.1.1: device descriptor read/all, error -71
  266. [ 14.581576] udevd[143]: starting version 175
  267. [ 15.328126] usb 1-1.3.1: USB disconnect, device number 8
  268. [ 15.603405] usb 1-1.3.1: new high-speed USB device number 11 using dwc_otg
  269. [ 15.735030] usb 1-1.3.1: New USB device found, idVendor=2109, idProduct=2812
  270. [ 15.753582] usb 1-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  271. [ 15.781177] usb 1-1.3.1: Product: USB 2.0 HUB
  272. [ 15.781194]
  273. [ 15.808223] hub 1-1.3.1:1.0: USB hub found
  274. [ 15.824748] hub 1-1.3.1:1.0: 4 ports detected
  275. [ 16.133502] usb 1-1.3.1.1: new high-speed USB device number 12 using dwc_otg
  276. [ 24.193980] usb 1-1.3.1.1: unable to read config index 0 descriptor/start: -71
  277. [ 24.213162] usb 1-1.3.1.1: chopping to 0 config(s)
  278. [ 31.721066] usb 1-1.3.1.1: string descriptor 0 read error: -71
  279. [ 31.738233] usb 1-1.3.1.1: New USB device found, idVendor=0930, idProduct=6545
  280. [ 31.748017] usb 1-1.3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  281. [ 31.761366] usb 1-1.3.1.1: no configuration chosen from 0 choices
  282. [ 31.769921] usb 1-1.3.1.1: No support over 500mA
  283. [ 35.535706] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  284. [ 36.006026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  285. [ 36.743100] bcm2835 ALSA card created!
  286. [ 36.749307] bcm2835 ALSA chip created!
  287. [ 36.769034] bcm2835 ALSA chip created!
  288. [ 36.779216] bcm2835 ALSA chip created!
  289. [ 36.787335] bcm2835 ALSA chip created!
  290. [ 36.795433] bcm2835 ALSA chip created!
  291. [ 36.804000] bcm2835 ALSA chip created!
  292. [ 36.811718] bcm2835 ALSA chip created!
  293. [ 44.760068] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  294. [ 45.545414] bcm2835-cpufreq: switching to governor ondemand
  295. [ 45.545442] bcm2835-cpufreq: switching to governor ondemand
  296. [ 69.321775] Adding 102396k swap on /var/swap. Priority:-1 extents:129 across:1754856k SS
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!