Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- UBI: image sequence number: 0
- UBI: background thread "ubi_bgt0d" started, PID 473
- MV-643xx 10/100/1000 ethernet driver version 1.4
- mv643xx_eth smi: probed
- net eth0: port 0 with MAC address 00:50:43:01:51:a4
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- orion-ehci orion-ehci.0: Marvell Orion EHCI
- orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
- orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
- orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- usbcore: registered new interface driver ums-datafab
- usbcore: registered new interface driver ums-freecom
- usbcore: registered new interface driver ums-jumpshot
- usbcore: registered new interface driver ums-sddr09
- usbcore: registered new interface driver ums-sddr55
- mice: PS/2 mouse device common for all mice
- rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
- i2c /dev entries driver
- cpuidle: using governor ladder
- cpuidle: using governor menu
- mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
- mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
- mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
- mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
- mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
- mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- mmc0: mvsdio driver initialized, using GPIO 47 for card detection
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- oprofile: hardware counters not available
- oprofile: using timer interrupt.
- TCP cubic registered
- NET: Registered protocol family 17
- lib80211: common routines for IEEE802.11 drivers
- Registering the dns_resolver key type
- registered taskstats version 1
- rtc-mv rtc-mv: setting system clock to 2000-01-01 00:02:08 UTC (946684928)
- mmc0: new high speed SDHC card at address 1234
- UBIFS: mounted UBI device 0, volume 0, name "rootfs"
- UBIFS: file system size: 515708928 bytes (503622 KiB, 491 MiB, 3997 LEBs)
- mmcblk0: mmc0:1234 SA08G 7.41 GiB
- UBIFS: journal size: 25804800 bytes (25200 KiB, 24 MiB, 200 LEBs)
- mmcblk0: unknown partition table
- UBIFS: media format: w4/r0 (latest is w4/r0)
- UBIFS: default compressor: lzo
- UBIFS: reserved for root: 4952683 bytes (4836 KiB)
- VFS: Mounted root (ubifs filesystem) on device 0:12.
- Freeing init memory: 160K
- INIT: version 2.88 booting
- Using makefile-style concurrent boot in runlevel S.
- Starting the hotplug events dispatcher: udevd.
- Synthesizing the initial hotplug events...done.
- Waiting for /dev to be fully populated...sata_mv sata_mv.0: version 1.28
- sata_mv sata_mv.0: slots 32 ports 2
- scsi0 : sata_mv
- scsi1 : sata_mv
- ata1: SATA max UDMA/133 irq 21
- ata2: SATA max UDMA/133 irq 21
- ata1: SATA link down (SStatus 0 SControl F300)
- ata2: SATA link down (SStatus 0 SControl F300)
- done.
- Activating swap...done.
- Cleaning up ifupdown....
- Setting up networking....
- Loading kernel modules...done.
- Activating lvm and md swap...done.
- Checking file systems...fsck from util-linux-ng 2.17.2
- done.
- Mounting local filesystems...mount: special device /dev/sda1 does not exist
- EXT3-fs: barriers not enabled
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (mmcblk0): using internal journal
- EXT3-fs (mmcblk0): recovery complete
- EXT3-fs (mmcblk0): mounted filesystem with writeback data mode
- failed.
- Activating swapfile swap...done.
- Configuring network interfaces...done.
- Starting portmap daemon....
- Starting NFS common utilities: statd.
- Setting kernel variables ...done.
- /etc/init.d/screen-cleanup: 42: xargs: not found
- /etc/init.d/screen-cleanup: 42: find: not found
- INIT: Entering runlevel: 2
- Using makefile-style concurrent boot in runlevel 2.
- /etc/init.d/crashplan: 42: /usr/local/crashplan/bin/CrashPlanEngine: not found
- Starting portmap daemon...Already running..
- Starting NFS common utilities: statd.
- /etc/init.d/sudo: 30: find: not found
- startpar: service(s) skipped: ntp ... (warning).
- Debian GNU/Linux 6.0 rallehom ttyS0
- rallehom login: eth0: link up, 1000 Mb/s, full duplex, flow control disabled
- root
- Password:
- Linux rallehom 2.6.37.2 #2 PREEMPT Mon Feb 28 06:37:28 MST 2011 armv5tel
- The programs included with the Debian GNU/Linux system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
- permitted by applicable law.
- -bash: id: command not found
- -bash: [: : integer expression expected
- cd /var/-bash: mesg: command not found
- root@rallehom:~# cd /var/log
- root@rallehom:/var/log# ls
- dmesg lastlog
- root@rallehom:/var/log#
- root@rallehom:/var/log# cd ..
- root@rallehom:/var# ls
- backups cache lib local lock log mail opt run spool tmp www
- root@rallehom:/var# cd log
- root@rallehom:/var/log# cat /etc/default/bootlogd
- BOOTLOGD_ENABLE=yes
- root@rallehom:/var/log#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement