Pastebin launched a little side project called VERYVIRAL.com, check it out ;-) Want more features on Pastebin? Sign Up, it's FREE!
Guest

Untitled

By: a guest on Nov 16th, 2012  |  syntax: None  |  size: 11.90 KB  |  views: 38  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. ACPI: Power Button [PWRF]
  2. ACPI: acpi_idle registered with cpuidle
  3. ERST: Table is not found!
  4. GHES: HEST is not enabled!
  5. isapnp: Scanning for PnP cards...
  6. isapnp: No Plug & Play device found
  7. Non-volatile memory driver v1.3
  8. Linux agpgart interface v0.103
  9. crash memory driver: version 1.1
  10. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  11. brd: module loaded
  12. loop: module loaded
  13. input: Macintosh mouse button emulation as /devices/virtual/input/input3
  14. Fixed MDIO Bus: probed
  15. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  16. ehci_hcd 0000:00:10.4: PCI INT D -> GSI 23 (level, low) -> IRQ 23
  17. ehci_hcd 0000:00:10.4: EHCI Host Controller
  18. ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
  19. ehci_hcd 0000:00:10.4: debug port 1
  20. ehci_hcd 0000:00:10.4: irq 23, io mem 0xdffff000
  21. ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
  22. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  23. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  24. usb usb1: Product: EHCI Host Controller
  25. usb usb1: Manufacturer: Linux 2.6.32-279.14.1.el6.i686 ehci_hcd
  26. usb usb1: SerialNumber: 0000:00:10.4
  27. usb usb1: configuration #1 chosen from 1 choice
  28. hub 1-0:1.0: USB hub found
  29. hub 1-0:1.0: 6 ports detected
  30. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  31. uhci_hcd: USB Universal Host Controller Interface driver
  32. uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  33. uhci_hcd 0000:00:10.0: UHCI Host Controller
  34. uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
  35. uhci_hcd 0000:00:10.0: irq 20, io base 0x0000f800
  36. usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  37. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  38. usb usb2: Product: UHCI Host Controller
  39. usb usb2: Manufacturer: Linux 2.6.32-279.14.1.el6.i686 uhci_hcd
  40. usb usb2: SerialNumber: 0000:00:10.0
  41. usb usb2: configuration #1 chosen from 1 choice
  42. hub 2-0:1.0: USB hub found
  43. hub 2-0:1.0: 2 ports detected
  44. uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
  45. uhci_hcd 0000:00:10.1: UHCI Host Controller
  46. uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
  47. uhci_hcd 0000:00:10.1: irq 22, io base 0x0000f400
  48. usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  49. usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  50. usb usb3: Product: UHCI Host Controller
  51. usb usb3: Manufacturer: Linux 2.6.32-279.14.1.el6.i686 uhci_hcd
  52. usb usb3: SerialNumber: 0000:00:10.1
  53. usb usb3: configuration #1 chosen from 1 choice
  54. hub 3-0:1.0: USB hub found
  55. hub 3-0:1.0: 2 ports detected
  56. uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
  57. uhci_hcd 0000:00:10.2: UHCI Host Controller
  58. uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
  59. uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f000
  60. usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  61. usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  62. usb usb4: Product: UHCI Host Controller
  63. usb usb4: Manufacturer: Linux 2.6.32-279.14.1.el6.i686 uhci_hcd
  64. usb usb4: SerialNumber: 0000:00:10.2
  65. usb usb4: configuration #1 chosen from 1 choice
  66. hub 4-0:1.0: USB hub found
  67. hub 4-0:1.0: 2 ports detected
  68. PNP: No PS/2 controller found. Probing ports directly.
  69. serio: i8042 KBD port at 0x60,0x64 irq 1
  70. serio: i8042 AUX port at 0x60,0x64 irq 12
  71. mice: PS/2 mouse device common for all mice
  72. rtc_cmos 00:07: RTC can wake from S4
  73. rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
  74. rtc0: alarms up to one year, y3k, 242 bytes nvram
  75. cpuidle: using governor ladder
  76. cpuidle: using governor menu
  77. EFI Variables Facility v0.08 2004-May-17
  78. usbcore: registered new interface driver hiddev
  79. usbcore: registered new interface driver usbhid
  80. usbhid: v2.6:USB HID core driver
  81. TCP cubic registered
  82. Initializing XFRM netlink socket
  83. NET: Registered protocol family 17
  84. Using IPI No-Shortcut mode
  85. registered taskstats version 1
  86. rtc_cmos 00:07: setting system clock to 2012-11-16 19:10:03 UTC (1353093003)
  87. Initalizing network drop monitor service
  88. Freeing unused kernel memory: 508k freed
  89. Write protecting the kernel text: 4372k
  90. Write protecting the kernel read-only data: 1876k
  91. dracut: dracut-004-284.el6_3.1
  92. dracut: rd_NO_LVM: removing LVM activation
  93. Loading iSCSI transport class v2.0-870.
  94. iscsi: registered transport (qla4xxx)
  95. QLogic iSCSI HBA Driver
  96. usb 1-1: new high speed USB device number 2 using ehci_hcd
  97. usb 1-1: New USB device found, idVendor=152d, idProduct=2329
  98. usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
  99. usb 1-1: Product: USB to ATA/ATAPI bridge
  100. usb 1-1: Manufacturer: JMicron
  101. usb 1-1: SerialNumber: DAA0492567FF
  102. usb 1-1: configuration #1 chosen from 1 choice
  103. libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
  104. libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
  105. Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
  106. iscsi: registered transport (cxgb3i)
  107. Refined TSC clocksource calibration: 1499.829 MHz.
  108. Switching to clocksource tsc
  109. Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
  110. iscsi: registered transport (cxgb4i)
  111. NET: Registered protocol family 10
  112. lo: Disabled Privacy Extensions
  113. cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.10 (March 21, 2012)
  114. Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 26, 2012)
  115. iscsi: registered transport (bnx2i)
  116. iscsi: registered transport (be2iscsi)
  117. usb 3-1: new full speed USB device number 2 using uhci_hcd
  118. device-mapper: uevent: version 1.0.3
  119. device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  120. udev: starting version 147
  121. usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
  122. usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  123. usb 3-1: Product: USB Receiver
  124. usb 3-1: Manufacturer: Logitech
  125. usb 3-1: configuration #1 chosen from 1 choice
  126. input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input4
  127. generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:10.1-1/input0
  128. input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.1/input/input5
  129. generic-usb 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-1/input1
  130. generic-usb 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.1-1/input2
  131. dracut: Starting plymouth daemon
  132. VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.14
  133. Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
  134. Copyright (c) 2004 Red Hat Inc.
  135.   alloc irq_desc for 28 on node -1
  136.   alloc kstat_irqs on node -1
  137. via-velocity 0000:02:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
  138. via-velocity 0000:02:00.0: setting latency timer to 64
  139. eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
  140. eth0: Ethernet Address: 00:40:63:F9:BE:4E
  141. pata_via 0000:00:0f.0: version 0.3.4
  142. scsi0 : pata_via
  143. scsi1 : pata_via
  144. ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
  145. ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
  146. ata1.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
  147. ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  148. ata1.01: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
  149. ata1.01: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  150. ata1.00: configured for UDMA/133
  151. ata1.01: configured for UDMA/133
  152. scsi 0:0:0:0: Direct-Access     ATA      WDC WD30EZRX-00M 80.0 PQ: 0 ANSI: 5
  153. scsi 0:0:1:0: Direct-Access     ATA      WDC WD30EZRX-00M 80.0 PQ: 0 ANSI: 5
  154. ata2.00: CFA: ULTIMATE CF CARD 4GB, 20070418, max UDMA/100
  155. ata2.00: 7962192 sectors, multi 0: LBA
  156. ata2.00: configured for UDMA/100
  157. scsi 1:0:0:0: Direct-Access     ATA      ULTIMATE CF CARD 2007 PQ: 0 ANSI: 5
  158. Initializing USB Mass Storage driver...
  159. scsi2 : SCSI emulation for USB Mass Storage devices
  160. usbcore: registered new interface driver usb-storage
  161. USB Mass Storage support registered.
  162. usb-storage: device found at 2
  163. usb-storage: waiting for device to settle before scanning
  164. sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
  165. sd 0:0:0:0: [sda] 4096-byte physical blocks
  166. sd 0:0:0:0: [sda] Write Protect is off
  167. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  168. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  169.  sda:
  170. sd 1:0:0:0: [sdc] 7962192 512-byte logical blocks: (4.07 GB/3.79 GiB)
  171. sd 1:0:0:0: [sdc] Write Protect is off
  172. sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  173. sd 1:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  174.  sdc: sdc1 sdc2
  175. sd 1:0:0:0: [sdc] Attached SCSI disk
  176. sd 0:0:1:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
  177. sd 0:0:1:0: [sdb] 4096-byte physical blocks
  178. sd 0:0:1:0: [sdb] Write Protect is off
  179. sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
  180. sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  181.  sdb: sda1
  182. sd 0:0:0:0: [sda] Attached SCSI disk
  183.  sdb1
  184. sd 0:0:1:0: [sdb] Attached SCSI disk
  185. usb-storage: device scan complete
  186. scsi 2:0:0:0: Direct-Access     WDC WD15 EARS-00MVWB0          PQ: 0 ANSI: 2 CCS
  187. sd 2:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
  188. sd 2:0:0:0: [sdd] Write Protect is off
  189. sd 2:0:0:0: [sdd] Mode Sense: 28 00 00 00
  190. sd 2:0:0:0: [sdd] Assuming drive cache: write through
  191. sd 2:0:0:0: [sdd] Assuming drive cache: write through
  192.  sdd: sdd1
  193. sd 2:0:0:0: [sdd] Assuming drive cache: write through
  194. sd 2:0:0:0: [sdd] Attached SCSI disk
  195. padlock: Using VIA PadLock ACE for AES algorithm.
  196. EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
  197. dracut: Mounted root filesystem /dev/mapper/luks-ed24dbfb-54ac-4572-9fa6-49c2cc34bbd0
  198. SELinux:  Disabled at runtime.
  199. SELinux:  Unregistering netfilter hooks
  200. type=1404 audit(1353093301.491:2): selinux=0 auid=4294967295 ses=4294967295
  201. dracut:
  202. dracut: Switching root
  203. udev: starting version 147
  204. sd 0:0:0:0: Attached scsi generic sg0 type 0
  205. sd 0:0:1:0: Attached scsi generic sg1 type 0
  206. sd 1:0:0:0: Attached scsi generic sg2 type 0
  207. sd 2:0:0:0: Attached scsi generic sg3 type 0
  208.   alloc irq_desc for 17 on node -1
  209.   alloc kstat_irqs on node -1
  210. snd_hda_intel 0000:00:14.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  211.   alloc irq_desc for 51 on node -1
  212.   alloc kstat_irqs on node -1
  213. snd_hda_intel 0000:00:14.0: irq 51 for MSI/MSI-X
  214. snd_hda_intel 0000:00:14.0: setting latency timer to 64
  215. snd_hda_intel 0000:00:14.0: PCI: Disallowing DAC for device
  216. input: PC Speaker as /devices/platform/pcspkr/input/input6
  217. EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts:
  218. ip6_tables: (C) 2000-2006 Netfilter Core Team
  219. nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  220. ip_tables: (C) 2000-2006 Netfilter Core Team
  221. via-velocity 0000:02:00.0: BAR 0: set to [io  0xec00-0xecff] (PCI address [0xec00-0xecff]
  222. via-velocity 0000:02:00.0: BAR 1: set to [mem 0xdf7ff000-0xdf7ff0ff 64bit] (PCI address [0xdf7ff000-0xdf7ff0ff]
  223. Velocity is AUTO mode
  224. eth0: Link auto-negotiation speed 100M bps full duplex
  225. RPC: Registered named UNIX socket transport module.
  226. RPC: Registered udp transport module.
  227. RPC: Registered tcp transport module.
  228. RPC: Registered tcp NFSv4.1 backchannel transport module.
  229. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  230. All bugs added by David S. Miller <davem@redhat.com>
  231. 8021q: adding VLAN 0 to HW filter on device eth0
  232. bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.11 (Apr 24, 2012)
  233. eth0: no IPv6 routers present
  234. tun: Universal TUN/TAP device driver, 1.6
  235. tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  236. padlock: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
  237. EXT4-fs (dm-1): warning: mounting fs with errors, running e2fsck is recommended
  238. EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
  239. EXT4-fs (dm-2): warning: maximal mount count reached, running e2fsck is recommended
  240. EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
  241. EXT4-fs (dm-3): warning: checktime reached, running e2fsck is recommended
  242. EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
  243. fuse init (API version 7.13)