Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 2.6.18-308.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)) #1 SMP Tue Feb 21 20:06:06 EST 2012
- Command line: ro root=LABEL=/ console=ttyS0,115200n8r console=tty0
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000010000 - 000000000009dc00 (usable)
- BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000dfffd000 (usable)
- BIOS-e820: 00000000dfffd000 - 00000000e0000000 (reserved)
- BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
- BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
- DMI 2.4 present.
- DMI: Red Hat KVM, BIOS 0.5.1 01/01/2007
- kvm-clock: cpu 0, msr 7eff:804a7401, boot clock
- ACPI: RSDP (v000 BOCHS ) @ 0x00000000000fda20
- ACPI: RSDT (v001 BOCHS BXPCRSDT 0x00000001 BXPC 0x00000001) @ 0x00000000dfffd6b0
- ACPI: FADT (v001 BOCHS BXPCFACP 0x00000001 BXPC 0x00000001) @ 0x00000000dffffe20
- ACPI: SSDT (v001 BOCHS BXPCSSDT 0x00000001 BXPC 0x00000001) @ 0x00000000dfffd7d0
- ACPI: MADT (v001 BOCHS BXPCAPIC 0x00000001 BXPC 0x00000001) @ 0x00000000dfffd6e0
- ACPI: DSDT (v001 BXPC BXDSDT 0x00000001 INTL 0x20090123) @ 0x0000000000000000
- No NUMA configuration found
- Faking a node at 0000000000000000-0000000120000000
- Bootmem setup node 0 0000000000000000-0000000120000000
- bootmap start 1c000 pages 36
- Memory for crash kernel (0x0 to 0x0) notwithin permissible range
- disabling kdump
- Setting up node 0 0-120000
- On node 0 totalpages: 1030825
- DMA zone: 2420 pages, LIFO batch:0
- DMA32 zone: 899125 pages, LIFO batch:31
- Normal zone: 129280 pages, LIFO batch:31
- ACPI: PM-Timer IO Port: 0xb008
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- Processor #0 6:13 APIC version 20
- ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
- ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ5 used by override.
- ACPI: IRQ9 used by override.
- ACPI: IRQ10 used by override.
- ACPI: IRQ11 used by override.
- Setting APIC routing to physical flat
- Using ACPI (MADT) for SMP configuration information
- Nosave address range: 000000000009d000 - 000000000009e000
- Nosave address range: 000000000009e000 - 00000000000a0000
- Nosave address range: 00000000000a0000 - 00000000000f0000
- Nosave address range: 00000000000f0000 - 0000000000100000
- Nosave address range: 00000000dfffd000 - 00000000e0000000
- Nosave address range: 00000000e0000000 - 00000000fffbc000
- Nosave address range: 00000000fffbc000 - 0000000100000000
- Allocating PCI resources starting at e2000000 (gap: e0000000:1ffbc000)
- SMP: Allowing 1 CPUs, 0 hotplug CPUs
- kvm-clock: cpu 0, msr 0:1003401, primary cpu clock
- Built 1 zonelists. Total pages: 1030825
- Kernel command line: ro root=LABEL=/ console=ttyS0,115200n8r console=tty0
- Initializing CPU#0
- PID hash table entries: 4096 (order: 12, 32768 bytes)
- Using TSC for driving interrupts
- Console: colour VGA+ 80x25
- Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- Checking aperture...
- ACPI: DMAR not present
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- Placing software IO TLB between 0x1623000 - 0x5623000
- Memory: 4048112k/4718592k available (2616k kernel code, 145720k reserved, 1671k data, 224k init)
- Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.70 BogoMIPS (lpj=2533350)
- Security Framework v1.0.0 initialized
- SELinux: Initializing.
- SELinux: Starting in permissive mode
- selinux_register_security: Registering secondary module capability
- Capability LSM initialized as secondary
- Mount-cache hash table entries: 256
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 4096K
- SMP alternatives: switching to UP code
- Freeing SMP alternatives: 32k freed
- ACPI: Core revision 20060707
- Using local APIC timer interrupts.
- Detected 62.499 MHz APIC timer.
- Brought up 1 CPUs
- time.c: Using 1.193182 MHz WALL KVM GTOD KVM timer.
- time.c: Detected 2533.350 MHz processor.
- sizeof(vma)=176 bytes
- sizeof(page)=56 bytes
- sizeof(inode)=560 bytes
- sizeof(dentry)=216 bytes
- sizeof(ext3inode)=760 bytes
- sizeof(buffer_head)=96 bytes
- sizeof(skbuff)=248 bytes
- checking if image is initramfs... it is
- Freeing initrd memory: 2639k freed
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: Using configuration type 1
- ACPI: Interpreter enabled
- ACPI: Using IOAPIC for interrupt routing
- ACPI: No dock devices found.
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- PCI quirk: region b000-b03f claimed by PIIX4 ACPI
- PCI quirk: region b100-b10f claimed by PIIX4 SMB
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
- ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0, disabled.
- Linux Plug and Play Support v0.97 (c) Adam Belay
- pnp: PnP ACPI init
- pnp: PnP ACPI: found 7 devices
- usbcore: registered new driver usbfs
- usbcore: registered new driver hub
- PCI: Using ACPI for IRQ routing
- PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- ACPI: DMAR not present
- PCI-GART: No AMD northbridge found.
- NET: Registered protocol family 2
- IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 262144 bind 65536)
- TCP reno registered
- audit: initializing netlink socket (disabled)
- type=2000 audit(1360753667.587:1): initialized
- Total HugeTLB memory allocated, 0
- VFS: Disk quotas dquot_6.5.1
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- SELinux: Registering netfilter hooks
- Initializing Cryptographic API
- alg: No test for crc32c (crc32c-generic)
- ksign: Installing public key data
- Loading keyring
- - Added public key 48D0A1FBAE482C4C
- - User ID: CentOS (Kernel Module GPG key)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- Limiting direct PCI/PCI transfers.
- PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
- Activating ISA DMA hang workarounds.
- Boot video device is 0000:00:02.0
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- Real Time Clock Driver v1.12ac
- hpet_acpi_add: no address or irqs in _CRS
- Non-volatile memory driver v1.2
- Linux agpgart interface v0.101 (c) Dave Jones
- Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- brd: module loaded
- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- PIIX3: IDE controller at PCI slot 0000:00:01.1
- PIIX3: chipset revision 0
- PIIX3: not 100% native mode: will probe irqs later
- PCI: Setting latency timer of device 0000:00:01.1 to 64
- ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio
- ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
- Probing IDE interface ide0...
- Probing IDE interface ide1...
- Probing IDE interface ide0...
- Probing IDE interface ide1...
- ide-floppy driver 0.99.newide
- usbcore: registered new driver hiddev
- usbcore: registered new driver usbhid
- drivers/usb/input/hid-core.c: v2.6:USB HID core driver
- PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
- md: bitmap version 4.39
- TCP bic registered
- Initializing IPsec netlink socket
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- input: AT Translated Set 2 keyboard as /class/input/input0
- ACPI: (supports S5)
- Initalizing network drop monitor service
- Freeing unused kernel memory: 224k freed
- Write protecting the kernel read-only data: 530k
- input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
- ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
- USB Universal Host Controller Interface driver v3.0
- ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
- ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 11 (level, high) -> IRQ 11
- PCI: Setting latency timer of device 0000:00:01.2 to 64
- uhci_hcd 0000:00:01.2: UHCI Host Controller
- uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
- uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
- ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, high) -> IRQ 10
- ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 11 (level, high) -> IRQ 11
- ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
- ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 10 (level, high) -> IRQ 10
- vda: vda1 vda2 vda3
- SCSI subsystem initialized
- libata version 3.00 loaded.
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
- device-mapper: dm-raid45: initialized v0.2594l
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: mounted filesystem with ordered data mode.
- SELinux: Disabled at runtime.
- SELinux: Unregistering netfilter hooks
- type=1404 audit(1360753700.171:2): selinux=0 auid=4294967295 ses=4294967295
- input: PC Speaker as /class/input/input2
- piix4_smbus 0000:00:01.3: Found 0000:00:01.3 device
- FDC 0 is a S82078B
- lp: driver loaded but no devices found
- ACPI: Power Button (FF) [PWRF]
- ACPI: Mapper loaded
- dell-wmi: No known WMI GUID found
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: ... autorun DONE.
- device-mapper: multipath: version 1.0.6 loaded
- EXT3 FS on vda3, internal journal
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on vda1, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- Adding 2096472k swap on /dev/vda2. Priority:-1 extents:1 across:2096472k
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement