Create a new version of paste: f3a1c204a

Got an iPhone or iPad? We have a brand new Pastebin App for both devices, and it's totally free! Click here to download the new Pastebin App for iOS.

Public Pastes

Untitled1 sec ago
Untitled6 sec ago
Untitled6 sec ago
Untitled6 sec ago
Untitled6 sec ago
jowi6 sec ago
Untitled31 sec ago
UntitledJavaScript | 12 sec ago

New Paste

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May  1 08:49:13 UTC 2009
    root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e67000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e671e4.
Calibrating clock(s) ... i8254 clock: 1193214 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2128013712 Hz
CPU: Intel(R) Celeron(R) CPU          560  @ 2.13GHz (2128.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x10661  Stepping = 1
  Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>

Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
2nd-level cache: 1 MB, 4-way set associative, 64-byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 1024 kbytes, 4-way associative, 64 bytes/line
real memory  = 1063702528 (1014 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x000000003e44cfff, 1027768320 bytes (250920 pages)
avail memory = 1027198976 (979 MB)
Table 'FACP' at 0x3f66f09c
Table 'HPET' at 0x3f66f300
Table 'APIC' at 0x3f66f400
MADT: Found table at 0x3f66f400
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
ACPI APIC Table: <DELL   M09    >
bios32: Found BIOS32 Service Directory header at 0xc00ffa00
bios32: Entry = 0xffa10 (c00ffa10)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb1d6
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ACPI: RSDP @ 0x0xfc080/0x0024 (v  2 DELL  )
ACPI: XSDT @ 0x0x3f66f200/0x005C (v  1 DELL    M09     0x27D9010F ASL  0x00000061)
ACPI: FACP @ 0x0x3f66f09c/0x00F4 (v  4 DELL    M09     0x27D9010F ASL  0x00000061)
ACPI: DSDT @ 0x0x3f66f800/0x567B (v  2 INT430 SYSFexxx 0x00001001 INTL 0x20050624)
ACPI: FACS @ 0x0x3f67e000/0x0040
ACPI: HPET @ 0x0x3f66f300/0x0038 (v  1 DELL    M09     0x00000001 ASL  0x00000061)
ACPI: APIC @ 0x0x3f66f400/0x0068 (v  1 DELL    M09     0x27D9010F ASL  0x00000047)
ACPI: MCFG @ 0x0x3f66f3c0/0x003E (v 16 DELL    M09     0x27D9010F ASL  0x00000061)
ACPI: SLIC @ 0x0x3f66f49c/0x0176 (v  1 DELL    M09     0x27D9010F ASL  0x00000061)
ACPI: SSDT @ 0x0x3f66e253/0x05E5 (v  1  PmRef  Cpu0Cst 0x00003001 INTL 0x20050624)
ACPI: SSDT @ 0x0x3f66dd87/0x04CC (v  1  PmRef    CpuPm 0x00003000 INTL 0x20050624)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May  1 2009 08:47:24)
npx0: INT 16 interface
acpi0: <DELL M09    > on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x800000a0
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=2a008086)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.VID_.IGDP -> bus 0 dev 2 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.MCHP -> bus 0 dev 0 func 0
ACPI: SSDT @ 0x0x3f67e080/0x0043 (v  1  LMPWR  DELLLOM 0x00001001 INTL 0x20050624)
acpi0: wakeup code va 0xc3e6b000 pa 0x1000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR1 -> bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR2 -> bus 0 dev 31 func 0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi0: reservation of 0, 9f000 (3) failed
acpi0: reservation of 100000, 3f56d800 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  9 10 11
  Validation          0   11   N     0  9 10 11
  After Disable       0  255   N     0  9 10 11
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  5 7
  Validation          0  255   N     0  5 7
  After Disable       0  255   N     0  5 7
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    4   N     0  9 10 11
  Validation          0  255   N     0  9 10 11
  After Disable       0  255   N     0  9 10 11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  5 7 9 10 11
  Validation          0    5   N     0  5 7 9 10 11
  After Disable       0  255   N     0  5 7 9 10 11
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    9   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0    9   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0    7   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x2a00, revid=0x0c
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2a02, revid=0x0c
	domain=0, bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 64, base 0xf6e00000, size 20, enabled
	map[18]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
	map[20]: type I/O Port, range 32, base 0xeff8, size  3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2a03, revid=0x0c
	domain=0, bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xf6f00000, size 20, enabled
found->	vendor=0x8086, dev=0x2834, revid=0x02
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0x6f20, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x2835, revid=0x02
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=9
	map[20]: type I/O Port, range 32, base 0x6f00, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x283a, revid=0x02
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfed1c400, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 22
found->	vendor=0x8086, dev=0x284b, revid=0x02
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=9
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xf6dfc000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 21
found->	vendor=0x8086, dev=0x283f, revid=0x02
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2841, revid=0x02
	domain=0, bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2845, revid=0x02
	domain=0, bus=0, slot=28, func=3
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2849, revid=0x02
	domain=0, bus=0, slot=28, func=5
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2830, revid=0x02
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0x6f80, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x2831, revid=0x02
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=9
	map[20]: type I/O Port, range 32, base 0x6f60, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x2832, revid=0x02
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	map[20]: type I/O Port, range 32, base 0x6f40, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 22
found->	vendor=0x8086, dev=0x2836, revid=0x02
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfed1c000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x2448, revid=0xf2
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2815, revid=0x02
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2850, revid=0x02
	domain=0, bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type I/O Port, range 32, base 0x6fa0, size  4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2829, revid=0x02
	domain=0, bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 4 messages
	map[10]: type I/O Port, range 32, base 0x6eb0, size  3, enabled
	map[14]: type I/O Port, range 32, base 0x6eb8, size  2, enabled
	map[18]: type I/O Port, range 32, base 0x6ec0, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0x6ec8, size  2, enabled
	map[20]: type I/O Port, range 32, base 0x6ee0, size  5, enabled
	map[24]: type Memory, range 32, base 0xf6dfb800, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x283e, revid=0x02
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	map[10]: type Memory, range 32, base 0xf6dfb700, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x10c0, size  5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem 0xf6e00000-0xf6efffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xe0000000
vgapci0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xf6e00000
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf6f00000-0xf6ffffff at device 2.1 on pci0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f20
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 49
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f00
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c400
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 51
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     11
pcib1:   subordinate bus   11
pcib1:   I/O decode        0xf000-0xfff
pcib1:   no prefetched decode
pci11: <ACPI PCI bus> on pcib1
pci11: domain=0, physical bus=11
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib2:   domain            0
pcib2:   secondary bus     12
pcib2:   subordinate bus   12
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xf6c00000-0xf6cfffff
pcib2:   no prefetched decode
pci12: <ACPI PCI bus> on pcib2
pci12: domain=0, physical bus=12
found->	vendor=0x14e4, dev=0x4315, revid=0x01
	domain=0, bus=12, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xf6cfc000, size 14, enabled
pcib2: requested memory range 0xf6cfc000-0xf6cfffff: good
pcib2: matched entry for 12.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 17
pci12: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pcib3:   domain            0
pcib3:   secondary bus     13
pcib3:   subordinate bus   14
pcib3:   I/O decode        0xd000-0xdfff
pcib3:   memory decode     0xf6a00000-0xf6bfffff
pcib3:   prefetched decode 0xf0000000-0xf01fffff
pci13: <ACPI PCI bus> on pcib3
pci13: domain=0, physical bus=13
pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pcib4:   domain            0
pcib4:   secondary bus     9
pcib4:   subordinate bus   9
pcib4:   I/O decode        0xf000-0xfff
pcib4:   memory decode     0xf6900000-0xf69fffff
pcib4:   no prefetched decode
pci9: <ACPI PCI bus> on pcib4
pci9: domain=0, physical bus=9
found->	vendor=0x14e4, dev=0x1713, revid=0x02
	domain=0, bus=9, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xf69f0000, size 16, enabled
pcib4: requested memory range 0xf69f0000-0xf69fffff: good
pcib4: matched entry for 9.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 17
bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xf69f0000-0xf69fffff irq 17 at device 0.0 on pci9
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf69f0000
bge0: adjust device control 0x2000 -> 0x5000
bge0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 52
bge0: using IRQ 256 for MSI
bge0: CHIP ID 0xc0020000; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000af7, model 0x0004, rev. 0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:23:ae:04:ba:ca
bge0: [MPSAFE]
bge0: [ITHREAD]
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f80
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f60
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f40
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c000
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     3
pcib5:   subordinate bus   3
pcib5:   I/O decode        0xf000-0xfff
pcib5:   memory decode     0xf6800000-0xf68fffff
pcib5:   no prefetched decode
pcib5:   Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib5
pci3: domain=0, physical bus=3
found->	vendor=0x1180, dev=0x0832, revid=0x05
	domain=0, bus=3, slot=1, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf68ff800, size 11, enabled
pcib5: requested memory range 0xf68ff800-0xf68fffff: good
pcib5: matched entry for 3.1.INTA
pcib5: slot 1 INTA hardwired to IRQ 19
found->	vendor=0x1180, dev=0x0822, revid=0x22
	domain=0, bus=3, slot=1, func=1
	class=08-05-01, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=4
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf68ff400, size  8, enabled
pcib5: requested memory range 0xf68ff400-0xf68ff4ff: good
pcib5: matched entry for 3.1.INTB
pcib5: slot 1 INTB hardwired to IRQ 18
found->	vendor=0x1180, dev=0x0843, revid=0x12
	domain=0, bus=3, slot=1, func=2
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=4
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf68ff500, size  8, enabled
pcib5: requested memory range 0xf68ff500-0xf68ff5ff: good
pcib5: matched entry for 3.1.INTB
pcib5: slot 1 INTB hardwired to IRQ 18
found->	vendor=0x1180, dev=0x0592, revid=0x12
	domain=0, bus=3, slot=1, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=4
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf68ff600, size  8, enabled
pcib5: requested memory range 0xf68ff600-0xf68ff6ff: good
pcib5: matched entry for 3.1.INTB
pcib5: slot 1 INTB hardwired to IRQ 18
found->	vendor=0x1180, dev=0x0852, revid=0x12
	domain=0, bus=3, slot=1, func=4
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=4
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf68ff700, size  8, enabled
pcib5: requested memory range 0xf68ff700-0xf68ff7ff: good
pcib5: matched entry for 3.1.INTB
pcib5: slot 1 INTB hardwired to IRQ 18
fwohci0: vendor=1180, dev=832
fwohci0: vendor=1180, dev=832
fwohci0: <1394 Open Host Controller Interface> mem 0xf68ff800-0xf68fffff irq 19 at device 1.0 on pci3
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf68ff800
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 44:4f:c0:00:30:49:95:c1
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 46:4f:c0:49:95:c1
fwe0: bpf attached
fwe0: Ethernet address: 46:4f:c0:49:95:c1
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 44:4f:c0:00:30:49:95:c1 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x3e424000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci3: <base peripheral, SD host controller> at device 1.1 (no driver attached)
pci3: <base peripheral> at device 1.2 (no driver attached)
pci3: <base peripheral> at device 1.3 (no driver attached)
pci3: <base peripheral> at device 1.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6fa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata0: [ITHREAD]
atapci1: <Intel (ID=28298086) AHCI controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eff mem 0xf6dfb800-0xf6dfbfff irq 17 at device 31.2 on pci0
atapci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6ee0
atapci1: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf6dfb800
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 55
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 3 ports detected
ata2: <ATA channel 0> on atapci1
ata2: SATA connect time=0ms
ata2: SIGNATURE: 00000101
ata2: ahci_reset devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: port not implemented
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: SATA connect status=00000004
ata4: ahci_reset devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 0: ioport 0xc00 alloc failed
ex_isa_identify()
ata: ata0 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata1 failed to probe at port 0x170 irq 15 on isa0
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x4eb1 0x4eb1 0x4eb1 0x4eb1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x4eb1 0x4eb1 0x4eb1 0x4eb1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4eb1 0x4eb1 0x4eb1 0x4eb1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 66500449 hz
Timecounter "TSC" frequency 2128013712 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
acpi_acad0: acline initialization start
acd0: setting PIO4 on ICH8M chip
acpi_acad0: On Lineacd0: setting UDMA33 on ICH8M chip

acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
acd0: <MATSHITA DVD+/-RW UJ-875S/D200> DVDR drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable caddy, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 238475MB <Seagate ST9250827AS 3.ADB> at ata2-master SATA300
ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
GEOM_LABEL: Label for provider ad4s1 is msdosfs/DellUtility.
GEOM_LABEL: Label for provider ad4s2 is ntfs/OS.
GEOM_LABEL: Label for provider ad4s4a is ufsid/4a0448b836027261.
GEOM_LABEL: Label for provider ad4s4d is ufsid/4a0448bb6631b324.
GEOM_LABEL: Label for provider ad4s4e is ufsid/4a0448b80bec5d96.
GEOM_LABEL: Label for provider ad4s4f is ufsid/4a0448b836ae7b99.
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad4s4a
start_init: trying /sbin/init
GEOM_LABEL: Label ufsid/4a0448b836027261 removed.
GEOM_LABEL: Label for provider ad4s4a is ufsid/4a0448b836027261.
GEOM_LABEL: Label ufsid/4a0448b80bec5d96 removed.
GEOM_LABEL: Label for provider ad4s4e is ufsid/4a0448b80bec5d96.
GEOM_LABEL: Label ufsid/4a0448b836ae7b99 removed.
GEOM_LABEL: Label for provider ad4s4f is ufsid/4a0448b836ae7b99.
GEOM_LABEL: Label ufsid/4a0448bb6631b324 removed.
GEOM_LABEL: Label for provider ad4s4d is ufsid/4a0448bb6631b324.
GEOM_LABEL: Label ufsid/4a0448b836027261 removed.
GEOM_LABEL: Label ufsid/4a0448b80bec5d96 removed.
GEOM_LABEL: Label ufsid/4a0448b836ae7b99 removed.
GEOM_LABEL: Label ufsid/4a0448bb6631b324 removed.
Linux ELF exec handler installed

Optional Paste Settings

Syntax Highlighting:

Paste Expiration:

Paste Exposure:

Paste Name / Title:

Hello Guest
Sign Up or Login

You are currently not logged in, this means you can not edit or delete anything you paste. Sign Up or Login

Pastebin.com Tools & Applications

iPhone/iPad

Windows

Firefox

Chrome

WebOS

Android

Mac

Opera

Click.to

UNIX

WinPhone