Advertisement
Guest User

hawk

a guest
Aug 15th, 2009
126
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.21 KB | None | 0 0
  1. Linux version 2.6.27.29-CRI (builder@pld) (gcc version 4.3.3 20090211 (release) (PLD-Linux) ) #1 Sat Aug 15 18:01:33 CEST 2009
  2. BIOS-provided physical RAM map:
  3. BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  4. BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  5. BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  6. BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
  7. BIOS-e820: 000000000fff0000 - 0000000010000000 (ACPI data)
  8. BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
  9. DMI 2.5 present.
  10. last_pfn = 0xfff0 max_arch_pfn = 0x100000
  11. kernel direct mapping tables up to fff0000 @ 7000-d000
  12. RAMDISK: 0fa1d000 - 0ffceabb
  13. 255MB LOWMEM available.
  14. mapped low ram: 0 - 0fff0000
  15. low ram: 00000000 - 0fff0000
  16. bootmap 00001000 - 00003000
  17. (7 early reservations) ==> bootmem [0000000000 - 000fff0000]
  18. #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
  19. #1 [0000100000 - 0000297e38] TEXT DATA BSS ==> [0000100000 - 0000297e38]
  20. #2 [000fa1d000 - 000ffceabb] RAMDISK ==> [000fa1d000 - 000ffceabb]
  21. #3 [0000298000 - 000029a000] INIT_PG_TABLE ==> [0000298000 - 000029a000]
  22. #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
  23. #5 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
  24. #6 [0000001000 - 0000003000] BOOTMAP ==> [0000001000 - 0000003000]
  25. found SMP MP-table at [c009fff0] 0009fff0
  26. Zone PFN ranges:
  27. DMA 0x00000000 -> 0x00001000
  28. Normal 0x00001000 -> 0x0000fff0
  29. Movable zone start PFN for each node
  30. early_node_map[2] active PFN ranges
  31. 0: 0x00000000 -> 0x0000009f
  32. 0: 0x00000100 -> 0x0000fff0
  33. On node 0 totalpages: 65423
  34. free_area_init_node: node 0, pgdat c024c81c, node_mem_map c1000000
  35. DMA zone: 3967 pages, LIFO batch:0
  36. Normal zone: 60944 pages, LIFO batch:15
  37. Intel MultiProcessor Specification v1.4
  38. Virtual Wire compatibility mode.
  39. MPTABLE: OEM ID: VBOXCPU
  40. MPTABLE: Product ID: VirtualBox
  41. MPTABLE: APIC at: 0xFEE00000
  42. Processor #0 (Bootup-CPU)
  43. I/O APIC #1 Version 17 at 0xFEC00000.
  44. Enabling APIC mode: Flat. Using 1 I/O APICs
  45. Processors: 1
  46. mapped APIC to ffffb000 (fee00000)
  47. mapped IOAPIC to ffffa000 (fec00000)
  48. Allocating PCI resources starting at 20000000 (gap: 10000000:effc0000)
  49. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64911
  50. Kernel command line: initrd=initrd32 root=/dev/ram0 ramdisk_size=35840 init=/linuxrc cri=src=cd,media=cd BOOT_IMAGE=vmlinuz32
  51. Enabling fast FPU save and restore... done.
  52. Enabling unmasked SIMD FPU exception support... done.
  53. Initializing CPU#0
  54. PID hash table entries: 1024 (order: 10, 4096 bytes)
  55. TSC: Unable to calibrate against PIT
  56. TSC: No reference (HPET/PMTIMER) available
  57. Marking TSC unstable due to could not calculate TSC khz
  58. Console: colour VGA+ 80x25
  59. console [tty0] enabled
  60. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  61. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  62. Memory: 251528k/262080k available (1042k kernel code, 9860k reserved, 298k data, 152k init, 0k highmem)
  63. virtual kernel memory layout:
  64. fixmap : 0xfffb9000 - 0xfffff000 ( 280 kB)
  65. vmalloc : 0xd0800000 - 0xfffb7000 ( 759 MB)
  66. lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
  67. .init : 0xc0252000 - 0xc0278000 ( 152 kB)
  68. .data : 0xc0204b45 - 0xc024f3e8 ( 298 kB)
  69. .text : 0xc0100000 - 0xc0204b45 (1042 kB)
  70. Checking if this processor honours the WP bit even in supervisor mode...Ok.
  71. CPA: page pool initialized 1 of 1 pages preallocated
  72. Calibrating delay loop... 3915.77 BogoMIPS (lpj=7831552)
  73. Mount-cache hash table entries: 512
  74. CPU: L1 I cache: 32K, L1 D cache: 32K
  75. CPU: L2 cache: 2048K
  76. CPU: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz stepping 02
  77. Checking 'hlt' instruction... OK.
  78. Freeing SMP alternatives: 0k freed
  79. Spurious LAPIC timer interrupt on cpu 0
  80. ENABLING IO-APIC IRQs
  81. ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
  82. net_namespace: 440 bytes
  83. NET: Registered protocol family 16
  84. EISA bus registered
  85. PCI: PCI BIOS revision 2.10 entry at 0xfc080, last bus=0
  86. PCI: Using configuration type 1 for base access
  87. Linux Plug and Play Support v0.97 (c) Adam Belay
  88. PCI: Probing PCI hardware
  89. PCI: Probing PCI hardware (bus 00)
  90. PCI: 0000:00:01.1 reg 20 io port: [d000, d00f]
  91. PCI: 0000:00:02.0 reg 10 32bit mmio: [e0000000, e07fffff]
  92. PCI: 0000:00:03.0 reg 10 32bit mmio: [f0000000, f001ffff]
  93. PCI: 0000:00:03.0 reg 18 io port: [d010, d017]
  94. PCI: 0000:00:04.0 reg 10 io port: [d020, d03f]
  95. PCI: 0000:00:04.0 reg 14 32bit mmio: [f0400000, f07fffff]
  96. PCI: 0000:00:04.0 reg 18 32bit mmio: [f0800000, f0803fff]
  97. PCI: 0000:00:06.0 reg 10 32bit mmio: [f0804000, f0804fff]
  98. PCI: 0000:00:0b.0 reg 10 32bit mmio: [f0805000, f0805fff]
  99. PCI: 0000:00:14.0 reg 10 io port: [d100, d1ff]
  100. PCI: 0000:00:14.0 reg 14 32bit mmio: [f0820000, f083ffff]
  101. PCI: 0000:00:14.0 reg 18 32bit mmio: [f0840000, f085ffff]
  102. pci 0000:00:01.0: PIIX/ICH IRQ router [8086/7000]
  103. PCI BIOS passed nonexistent PCI bus 0!
  104. PCI BIOS passed nonexistent PCI bus 0!
  105. PCI BIOS passed nonexistent PCI bus 0!
  106. PCI BIOS passed nonexistent PCI bus 0!
  107. PCI BIOS passed nonexistent PCI bus 0!
  108. bus: 00 index 0 io port: [0, ffff]
  109. bus: 00 index 1 mmio: [0, ffffffff]
  110. NET: Registered protocol family 2
  111. IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  112. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  113. TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  114. TCP: Hash tables configured (established 8192 bind 8192)
  115. TCP reno registered
  116. NET: Registered protocol family 1
  117. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
  118. Freeing initrd memory: 5830k freed
  119. platform rtc_cmos: registered platform RTC device (no PNP device found)
  120. msgmni has been set to 503
  121. io scheduler noop registered (default)
  122. pci 0000:00:00.0: Limiting direct PCI/PCI transfers
  123. pci 0000:00:01.0: Activating ISA DMA hang workarounds
  124. pci 0000:00:02.0: Boot video device
  125. isapnp: Scanning for PnP cards...
  126. isapnp: No Plug & Play device found
  127. Real Time Clock Driver v1.12ac
  128. brd: module loaded
  129. PNP: No PS/2 controller found. Probing ports directly.
  130. serio: i8042 KBD port at 0x60,0x64 irq 1
  131. serio: i8042 AUX port at 0x60,0x64 irq 12
  132. input: AT Translated Set 2 keyboard as /class/input/input0
  133. EISA: Probing bus 0 at eisa.0
  134. TCP cubic registered
  135. NET: Registered protocol family 17
  136. Using IPI Shortcut mode
  137. RAMDISK: Lzma image found at block 0
  138. VFS: Mounted root (romfs filesystem) readonly.
  139. Freeing unused kernel memory: 152k freed
  140. SCSI subsystem initialized
  141. libata version 3.00 loaded.
  142. ata_piix 0000:00:01.1: version 2.12
  143. ata_piix 0000:00:01.1: setting latency timer to 64
  144. scsi0 : ata_piix
  145. scsi1 : ata_piix
  146. ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
  147. ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
  148. ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
  149. ata1.00: 1024000 sectors, multi 128: LBA
  150. ata1.01: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
  151. ata1.01: 1024000 sectors, multi 128: LBA
  152. ata1.00: configured for UDMA/100
  153. ata1.01: configured for UDMA/100
  154. ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
  155. ata2.00: configured for UDMA/100
  156. scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
  157. scsi 0:0:1:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
  158. scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
  159. Driver 'sr' needs updating - please use bus_type methods
  160. sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
  161. Uniform CD-ROM driver Revision: 3.20
  162. sr 1:0:0:0: Attached scsi CD-ROM sr0
  163. ISO 9660 Extensions: Microsoft Joliet Level 3
  164. Unable to load NLS charset iso8859-1
  165. Unable to load NLS charset iso8859-1
  166. ISO 9660 Extensions: RRIP_1991A
  167. Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
  168. Copyright (c) 1999-2006 Intel Corporation.
  169. e1000 0000:00:03.0: setting latency timer to 64
  170. e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) 08:00:27:8e:c1:e0
  171. e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
  172. e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
  173. Fusion MPT base driver 3.04.07
  174. Copyright (c) 1999-2008 LSI Corporation
  175. Fusion MPT SPI Host driver 3.04.07
  176. mptbase: ioc0: Initiating bringup
  177. ioc0: LSI53C1030 A0: Capabilities={Initiator}
  178. mptbase: ioc0: Initiating recovery
  179. mptbase: ioc0: ERROR - Enable Diagnostic mode FAILED! (00h)
  180. mptbase: ioc0: WARNING - NOT READY!
  181. mptbase: ioc0: WARNING - Cannot recover rc = -1!
  182. mptbase: ioc0: WARNING - Firmware Reload FAILED!
  183.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement