Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Kernel 2.6.38.7.1
- [root@localhost no]# dmesg
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 2.6.38.7-desktop-1mnb2 (thomas@n3.mandriva.com) (gcc version 4.6.0 20110513 (prerelease) (GCC) ) #1 SMP Sun May 22 21:09:18 UTC 2011
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000003f740000 (usable)
- BIOS-e820: 000000003f740000 - 000000003f750000 (ACPI data)
- BIOS-e820: 000000003f750000 - 000000003f800000 (ACPI NVS)
- BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
- Notice: NX (Execute Disable) protection missing in CPU!
- DMI 2.3 present.
- DMI: Hewlett-Packard HP dx2000 MT(PL091ET)/08FCh, BIOS 1.16 07/04/2005
- e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- last_pfn = 0x3f740 max_arch_pfn = 0x100000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-DFFFF uncachable
- E0000-EFFFF write-through
- F0000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 000000000 mask FC0000000 write-back
- 1 base 03F800000 mask FFF800000 uncachable
- 2 disabled
- 3 disabled
- 4 disabled
- 5 disabled
- 6 disabled
- 7 disabled
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- found SMP MP-table at [c00ff780] ff780
- initial memory mapped : 0 - 00c00000
- init_memory_mapping: 0000000000000000-00000000373fe000
- 0000000000 - 0000400000 page 4k
- 0000400000 - 0037000000 page 2M
- 0037000000 - 00373fe000 page 4k
- kernel direct mapping tables up to 373fe000 @ bfa000-c00000
- RAMDISK: 3616a000 - 37ff0000
- Allocated new RAMDISK: 342e4000 - 36169535
- Move RAMDISK from 000000003616a000 - 0000000037fef534 to 342e4000 - 36169534
- ACPI: RSDP 000f7190 00014 (v00 COMPAQ)
- ACPI: RSDT 3f740000 00030 (v01 COMPAQ INTEL865 07000504 MSFT 00000097)
- ACPI: FACP 3f740200 00081 (v02 COMPAQ INTEL865 07000504 MSFT 00000097)
- ACPI: DSDT 3f740360 03773 (v01 COMPAQ INTEL865 00000116 INTL 02002026)
- ACPI: FACS 3f750000 00040
- ACPI: APIC 3f740300 0005C (v01 COMPAQ INTEL865 07000504 MSFT 00000097)
- ACPI: OEMB 3f750040 00040 (v01 COMPAQ OEMBIOS 07000504 MSFT 00000097)
- ACPI: Local APIC address 0xfee00000
- 131MB HIGHMEM available.
- 883MB LOWMEM available.
- mapped low ram: 0 - 373fe000
- low ram: 0 - 373fe000
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- Normal 0x00001000 -> 0x000373fe
- HighMem 0x000373fe -> 0x0003f740
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000010 -> 0x0000009f
- 0: 0x00000100 -> 0x0003f740
- On node 0 totalpages: 259791
- free_area_init_node: node 0, pgdat c0698f00, node_mem_map f6c0d200
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3951 pages, LIFO batch:0
- Normal zone: 1736 pages used for memmap
- Normal zone: 220470 pages, LIFO batch:31
- HighMem zone: 263 pages used for memmap
- HighMem zone: 33339 pages, LIFO batch:7
- Using APIC driver default
- ACPI: PM-Timer IO Port: 0x808
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
- ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- SMP: Allowing 2 CPUs, 1 hotplug CPUs
- nr_irqs_gsi: 40
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- Allocating PCI resources starting at 3f800000 (gap: 3f800000:c0380000)
- Booting paravirtualized kernel on bare hardware
- setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
- PERCPU: Embedded 12 pages/cpu @f6800000 s27840 r0 d21312 u2097152
- pcpu-alloc: s27840 r0 d21312 u2097152 alloc=1*4194304
- pcpu-alloc: [0] 0 1
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257760
- Kernel command line: BOOT_IMAGE=linux root=UUID=77da7ba8-6892-4ee5-a9f7-baae6504fbfb nokmsboot logo.nologo quiet resume=UUID=534d6ce7-c28e-4767-866f-53ddce53198d splash=silent vga=788
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Initializing CPU#0
- allocated 5197760 bytes of page_cgroup
- please try 'cgroup_disable=memory' option if you don't want memory cgroups
- Initializing HighMem for node 0 (000373fe:0003f740)
- Memory: 986776k/1039616k available (3539k kernel code, 52388k reserved, 2231k data, 552k init, 134408k highmem)
- virtual kernel memory layout:
- fixmap : 0xffab5000 - 0xfffff000 (5416 kB)
- pkmap : 0xff400000 - 0xff800000 (4096 kB)
- vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
- .init : 0xc06a3000 - 0xc072d000 ( 552 kB)
- .data : 0xc0474fcc - 0xc06a2dc0 (2231 kB)
- .text : 0xc0100000 - 0xc0474fcc (3539 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- Hierarchical RCU implementation.
- RCU-based detection of stalled CPUs is disabled.
- NR_IRQS:2304
- CPU 0 irqstacks, hard=f3c20000 soft=f3c22000
- Console: colour dummy device 80x25
- console [tty0] enabled
- Fast TSC calibration using PIT
- Detected 2660.145 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.29 BogoMIPS (lpj=2660145)
- pid_max: default: 32768 minimum: 301
- Security Framework initialized
- TOMOYO Linux initialized
- Mount-cache hash table entries: 512
- Initializing cgroup subsys ns
- ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys memory
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys net_cls
- Initializing cgroup subsys blkio
- CPU0: Hyper-Threading is disabled
- mce: CPU supports 4 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- using mwait in idle threads.
- SMP alternatives: switching to UP code
- ACPI: Checking initramfs for custom DSDT
- ACPI: Core revision 20110112
- ftrace: allocating 15835 entries in 31 pages
- Enabling APIC mode: Flat. Using 1 I/O APICs
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 01
- Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
- ... version: 0
- ... bit width: 40
- ... generic registers: 18
- ... value mask: 000000ffffffffff
- ... max period: 0000007fffffffff
- ... fixed-purpose events: 0
- ... event mask: 000000000003ffff
- Brought up 1 CPUs
- Total of 1 processors activated (5320.29 BogoMIPS).
- devtmpfs: initialized
- Time: 16:35:13 Date: 11/19/11
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: Executed 1 blocks of module-level executable AML code
- ACPI: Interpreter enabled
- ACPI: (supports S0 S3 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- ACPI: Power Resource [GFAN] (on)
- ACPI: No dock devices found.
- HEST: Table not found.
- PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0x3f800000-0xffefffff] (ignored)
- pci 0000:00:00.0: [8086:2570] type 0 class 0x000600
- pci 0000:00:00.0: Enabling MCH 'Overflow' Device
- pci 0000:00:00.0: reg 10: [mem 0xfe800000-0xfebfffff pref]
- pci 0000:00:02.0: [8086:2572] type 0 class 0x000300
- pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
- pci 0000:00:02.0: reg 14: [mem 0xfe780000-0xfe7fffff]
- pci 0000:00:02.0: reg 18: [io 0xec00-0xec07]
- pci 0000:00:06.0: [8086:2576] type 0 class 0x000880
- pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
- pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
- pci 0000:00:1d.0: reg 20: [io 0xdc00-0xdc1f]
- pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
- pci 0000:00:1d.1: reg 20: [io 0xe000-0xe01f]
- pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
- pci 0000:00:1d.2: reg 20: [io 0xe400-0xe41f]
- pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
- pci 0000:00:1d.3: reg 20: [io 0xe800-0xe81f]
- pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
- pci 0000:00:1d.7: reg 10: [mem 0xfe77bc00-0xfe77bfff]
- pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.7: PME# disabled
- pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
- pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
- pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
- pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
- pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
- pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
- pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
- pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
- pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f]
- pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
- pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
- pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
- pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401
- pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff]
- pci 0000:00:1f.5: reg 14: [io 0xd400-0xd43f]
- pci 0000:00:1f.5: reg 18: [mem 0xfe77b800-0xfe77b9ff]
- pci 0000:00:1f.5: reg 1c: [mem 0xfe77b400-0xfe77b4ff]
- pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
- pci 0000:00:1f.5: PME# disabled
- pci 0000:01:02.0: [10ec:8139] type 0 class 0x000200
- pci 0000:01:02.0: reg 10: [io 0xb800-0xb8ff]
- pci 0000:01:02.0: reg 14: [mem 0xfe5ffc00-0xfe5ffcff]
- pci 0000:01:02.0: reg 30: [mem 0xfe5e0000-0xfe5effff pref]
- pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
- pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
- pci 0000:00:1e.0: bridge window [mem 0xfe500000-0xfe5fffff]
- pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- reserve RAM buffer: 000000000009fc00 - 000000000009ffff
- reserve RAM buffer: 000000003f740000 - 000000003fffffff
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- hpet clockevent registered
- HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- Switching to clocksource hpet
- Switched to NOHz mode on CPU #0
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:00: [bus 00-ff]
- pnp 00:00: [io 0x0cf8-0x0cff]
- pnp 00:00: [io 0x0000-0x0cf7 window]
- pnp 00:00: [io 0x0d00-0xffff window]
- pnp 00:00: [mem 0x000a0000-0x000bffff window]
- pnp 00:00: [mem 0x00000000 window]
- pnp 00:00: [mem 0x3f800000-0xffefffff window]
- pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- pnp 00:01: [dma 4]
- pnp 00:01: [io 0x0000-0x000f]
- pnp 00:01: [io 0x0081-0x0083]
- pnp 00:01: [io 0x0087]
- pnp 00:01: [io 0x0089-0x008b]
- pnp 00:01: [io 0x008f]
- pnp 00:01: [io 0x00c0-0x00df]
- pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:02: [io 0x0070-0x0071]
- pnp 00:02: [irq 8]
- pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- pnp 00:03: [io 0x0061]
- pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
- pnp 00:04: [io 0x00f0-0x00ff]
- pnp 00:04: [irq 13]
- pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- pnp 00:05: [irq 4]
- pnp 00:05: [dma 0 disabled]
- pnp 00:05: [io 0x03f8-0x03ff]
- pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:06: [irq 6]
- pnp 00:06: [dma 2]
- pnp 00:06: [io 0x03f0-0x03f5]
- pnp 00:06: [io 0x03f7]
- pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
- pnp 00:07: [irq 7]
- pnp 00:07: [dma 0 disabled]
- pnp 00:07: [io 0x0378-0x037f]
- pnp 00:07: [io 0x0778-0x077f]
- pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
- pnp 00:08: [io 0x0010-0x001f]
- pnp 00:08: [io 0x0022-0x003f]
- pnp 00:08: [io 0x0044-0x005f]
- pnp 00:08: [io 0x0062-0x0063]
- pnp 00:08: [io 0x0065-0x006f]
- pnp 00:08: [io 0x0072-0x007f]
- pnp 00:08: [io 0x0080]
- pnp 00:08: [io 0x0084-0x0086]
- pnp 00:08: [io 0x0088]
- pnp 00:08: [io 0x008c-0x008e]
- pnp 00:08: [io 0x0090-0x009f]
- pnp 00:08: [io 0x00a2-0x00bf]
- pnp 00:08: [io 0x00e0-0x00ef]
- pnp 00:08: [io 0x04d0-0x04d1]
- pnp 00:08: [io 0x0800-0x087f]
- pnp 00:08: [io 0x0000-0xffffffff disabled]
- pnp 00:08: [io 0x0480-0x04bf]
- pnp 00:08: [mem 0xfed20000-0xfed8ffff]
- pnp 00:08: [mem 0xffb00000-0xffbfffff]
- system 00:08: [io 0x04d0-0x04d1] has been reserved
- system 00:08: [io 0x0800-0x087f] has been reserved
- system 00:08: [io 0x0480-0x04bf] has been reserved
- system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
- system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved
- system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:09: [mem 0xfec00000-0xfec00fff]
- pnp 00:09: [mem 0xfee00000-0xfee00fff]
- system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
- system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
- system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0a: [io 0x0060]
- pnp 00:0a: [io 0x0064]
- pnp 00:0a: [irq 1]
- pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- pnp 00:0b: [irq 12]
- pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
- pnp 00:0c: [io 0x0000-0xffffffff disabled]
- pnp 00:0c: [io 0x0900-0x097f]
- system 00:0c: [io 0x0900-0x097f] has been reserved
- system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0d: [mem 0x00000000-0x0009ffff]
- pnp 00:0d: [mem 0x000c0000-0x000dffff]
- pnp 00:0d: [mem 0x000e0000-0x000fffff]
- pnp 00:0d: [mem 0x00100000-0x3f7fffff]
- pnp 00:0d: [mem 0xfff00000-0xffffffff]
- system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
- system 00:0d: [mem 0x000c0000-0x000dffff] could not be reserved
- system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
- system 00:0d: [mem 0x00100000-0x3f7fffff] could not be reserved
- system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
- system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp: PnP ACPI: found 14 devices
- ACPI: ACPI bus type pnp unregistered
- PnPBIOS: Disabled
- pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
- pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
- pci 0000:00:1e.0: PCI bridge to [bus 01-01]
- pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
- pci 0000:00:1e.0: bridge window [mem 0xfe500000-0xfe5fffff]
- pci 0000:00:1e.0: bridge window [mem pref disabled]
- pci 0000:00:1e.0: setting latency timer to 64
- pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
- pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
- pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff]
- pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
- pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- pci 0000:00:02.0: Boot video device
- PCI: CLS 0 bytes, default 64
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 31256k freed
- apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
- apm: overridden by ACPI.
- audit: initializing netlink socket (disabled)
- type=2000 audit(1321720513.450:1): initialized
- highmem bounce pool size: 64 pages
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 1725
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- vesafb: framebuffer at 0xf0000000, mapped to 0xf7c80000, using 1875k, total 8000k
- vesafb: mode is 800x600x16, linelength=1600, pages=7
- vesafb: scrolling: redraw
- vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
- Console: switching to colour frame buffer device 100x37
- fb0: VESA VGA frame buffer device
- ERST: Table is not found!
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- isapnp: Scanning for PnP cards...
- 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- Linux agpgart interface v0.103
- agpgart-intel 0000:00:00.0: Intel 865 Chipset
- agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
- agpgart-intel 0000:00:00.0: detected 8192K stolen memory
- agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
- brd: module loaded
- i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mousedev: PS/2 mouse device common for all mice
- rtc_cmos 00:02: RTC can wake from S4
- rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
- cpuidle: using governor ladder
- cpuidle: using governor menu
- TCP cubic registered
- Registering the dns_resolver key type
- Using IPI No-Shortcut mode
- PM: Checking hibernation image partition UUID=534d6ce7-c28e-4767-866f-53ddce53198d
- isapnp: No Plug & Play device found
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- PM: Hibernation image not present or could not be loaded.
- registered taskstats version 1
- Magic number: 3:186:591
- rtc_cmos 00:02: setting system clock to 2011-11-19 16:35:14 UTC (1321720514)
- BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
- Freeing unused kernel memory: 552k freed
- <30>dracut: dracut-010-6
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
- loop: module loaded
- Uniform Multi-Platform E-IDE driver
- ide-cd driver 5.00
- <30>udevd[110]: starting version 168
- psmouse serio1: ID: 10 00 64
- Refined TSC clocksource calibration: 2659.999 MHz.
- Switching to clocksource tsc
- input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
- <30>dracut: Starting plymouth daemon
- Floppy drive(s): fd0 is 1.44M
- FDC 0 is a post-1991 82077
- piix 0000:00:1f.1: IDE controller (0x8086:0x24db rev 0x02)
- PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
- PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- piix 0000:00:1f.1: not 100% native mode: will probe irqs later
- ide0: BM-DMA at 0xfc00-0xfc07
- ide1: BM-DMA at 0xfc08-0xfc0f
- Probing IDE interface ide0...
- 8139too: 8139too Fast Ethernet driver 0.9.28
- 8139too 0000:01:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- 8139too 0000:01:02.0: eth0: RealTek RTL8139 at 0xf7fb0c00, 00:50:fc:24:dc:66, IRQ 17
- 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- hda: ST340014A, ATA DISK drive
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- uhci_hcd: USB Universal Host Controller Interface driver
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
- hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
- hda: UDMA/100 mode selected
- Probing IDE interface ide1...
- hdc: DVD-RW IDE1004, ATAPI CD/DVD-ROM drive
- hdd: WDC WD200BB-00GFA0, ATA DISK drive
- hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
- hdc: drive side 80-wire cable detection failed, limiting max speed to UDMA33
- hdc: UDMA/33 mode selected
- hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
- hdd: UDMA/100 mode selected
- ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- ide1 at 0x170-0x177,0x376 on irq 15
- ide-cd: hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
- cdrom: Uniform CD-ROM driver Revision: 3.20
- uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- uhci_hcd 0000:00:1d.0: setting latency timer to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
- uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000dc00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: UHCI Host Controller
- usb usb1: Manufacturer: Linux 2.6.38.7-desktop-1mnb2 uhci_hcd
- usb usb1: SerialNumber: 0000:00:1d.0
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- uhci_hcd 0000:00:1d.1: setting latency timer to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: UHCI Host Controller
- usb usb2: Manufacturer: Linux 2.6.38.7-desktop-1mnb2 uhci_hcd
- usb usb2: SerialNumber: 0000:00:1d.1
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- uhci_hcd 0000:00:1d.2: setting latency timer to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: UHCI Host Controller
- usb usb3: Manufacturer: Linux 2.6.38.7-desktop-1mnb2 uhci_hcd
- usb usb3: SerialNumber: 0000:00:1d.2
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
- ehci_hcd 0000:00:1d.7: setting latency timer to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
- ehci_hcd 0000:00:1d.7: debug port 1
- ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
- ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe77bc00
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: EHCI Host Controller
- usb usb4: Manufacturer: Linux 2.6.38.7-desktop-1mnb2 ehci_hcd
- usb usb4: SerialNumber: 0000:00:1d.7
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 8 ports detected
- uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- uhci_hcd 0000:00:1d.3: setting latency timer to 64
- uhci_hcd 0000:00:1d.3: UHCI Host Controller
- uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e800
- usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb5: Product: UHCI Host Controller
- usb usb5: Manufacturer: Linux 2.6.38.7-desktop-1mnb2 uhci_hcd
- usb usb5: SerialNumber: 0000:00:1d.3
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- SCSI subsystem initialized
- libata version 3.00 loaded.
- ide-gd driver 1.18
- hda: max request size: 128KiB
- hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63
- hda: cache flushes supported
- hda: hda1
- hdd: max request size: 128KiB
- hdd: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63
- hdd: cache flushes not supported
- hdd: hdd1 hdd2 < hdd5 hdd6 >
- usb 3-2: new full speed USB device using uhci_hcd and address 2
- usb 3-2: New USB device found, idVendor=04f9, idProduct=0155
- usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
- usb 3-2: SerialNumber: BROK3J851383
- PM: Marking nosave pages: 000000000009f000 - 0000000000100000
- PM: Basic memory bitmaps created
- PM: Basic memory bitmaps freed
- PM: Starting manual resume from disk
- PM: Hibernation image partition 22:69 present
- PM: Looking for hibernation image.
- PM: Image not found (code -22)
- PM: Hibernation image not present or could not be loaded.
- EXT4-fs (hdd1): mounted filesystem with ordered data mode. Opts: (null)
- <30>dracut: Checking filesystems
- <30>dracut: fsck -T -t noopts=_netdev -A -a
- <30>dracut: /dev/hdd1: clean, 232520/637728 files, 1591947/2550310 blocks
- <30>dracut: Remounting /dev/disk/by-uuid/77da7ba8-6892-4ee5-a9f7-baae6504fbfb with -o ro,
- EXT4-fs (hdd1): mounted filesystem with ordered data mode. Opts: (null)
- <30>dracut: Mounted root filesystem /dev/hdd1
- <30>dracut: Switching root
- Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
- <30>systemd[1]: systemd 29 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +SYSVINIT +LIBCRYPTSETUP; mandriva)
- NET: Registered protocol family 10
- <30>systemd[1]: Set hostname to <localhost.localdomain>.
- <28>systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
- <27>systemd[1]: [/etc/rc.d/init.d/ip6tables:19] Failed to add LSB Provides name firewall.service, ignoring: File exists
- <30>udevd[366]: starting version 168
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:73
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:76
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:77
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:78
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:79
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:80
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:81
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:82
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:83
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:84
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:85
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:86
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:87
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:88
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:89
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:90
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:91
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:92
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:93
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:94
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:95
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:96
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:97
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:98
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:99
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:100
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:101
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:105
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:106
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:107
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:108
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:109
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:110
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:111
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:112
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:113
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:114
- <27>udevd[366]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:115
- <27>udevd[366]: NAME="%k" is ignored, because it breaks kernel supplied names, please remove it from /etc/udev/rules.d/51-hso-udev.rules:124
- EXT4-fs (hdd1): re-mounted. Opts: (null)
- iTCO_vendor_support: vendor-support=0
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
- iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
- iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- ACPI: Fan [FN00] (on)
- input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
- ACPI: Power Button [PWRB]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- ACPI: Power Button [PWRF]
- intel_rng: FWH not detected
- <14>mtp-probe[588]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2"
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- ACPI: acpi_idle registered with cpuidle
- [Firmware Bug]: Invalid critical threshold (2732)
- ACPI: Invalid passive threshold
- [Firmware Bug]: No valid trip found
- i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SM1R [io 0x400-0x44f]
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- <14>mtp-probe[588]: bus: 3, device: 2 was not an MTP device
- parport_pc 00:07: reported by Plug and Play ACPI
- parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
- <14>mtp-probe[784]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2"
- <14>mtp-probe[784]: bus: 3, device: 2 was not an MTP device
- fuse init (API version 7.16)
- ppdev: user-space parallel port driver
- <29>ntfs-3g[1014]: Version 2011.4.12 external FUSE 28
- <29>ntfs-3g[1014]: Mounted /dev/hda1 (Read-Write, label "", NTFS 3.1)
- <29>ntfs-3g[1014]: Cmdline options: rw,nosuid,nodev,locale=fr_FR.UTF-8
- <29>ntfs-3g[1014]: Mount options: rw,nosuid,nodev,allow_other,nonempty,atime,fsname=/dev/hda1,blkdev,blksize=4096
- <29>ntfs-3g[1014]: Ownership and permissions disabled, configuration type 1
- Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- Intel ICH 0000:00:1f.5: setting latency timer to 64
- <15>udev-configure-printer[989]: main()
- intel8x0_measure_ac97_clock: measured 50454 usecs (2432 samples)
- intel8x0: clocking to 48000
- Adding 1116480k swap on /dev/hdd5. Priority:0 extents:1 across:1116480k
- <30>systemd-fsck[1080]: /dev/hdd6 : propre, 2878/515088 fichiers, 154122/2058320 blocs
- EXT4-fs (hdd6): mounted filesystem with ordered data mode. Opts: (null)
- <55>udev-configure-printer[989]: do_add()
- <55>udev-configure-printer[1209]: add /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0
- <55>udev-configure-printer[1209]: read_usb_uri_map()
- <55>udev-configure-printer[1209]: device_id_from_devpath()
- <55>udev-configure-printer[1209]: parent devpath is /devices/pci0000:00/0000:00:1d.2/usb3/3-2
- <55>udev-configure-printer[1209]: Device vendor/product is 04F9:0155
- <27>systemd-tmpfiles[1218]: [/usr/lib/tmpfiles.d/legacy.conf:22] Unknown group 'lock'.
- <55>udev-configure-printer[1209]: parse_device_id()
- <55>udev-configure-printer[1209]: MFG:EGT MDL:Agoris7112 SERN:- serial:BROK3J851383
- <55>udev-configure-printer[1209]: CheckAndInstallDrivers()
- <29>systemd[1]: systemd-tmpfiles-setup.service: main process exited, code=exited, status=1
- <29>systemd[1]: Unit systemd-tmpfiles-setup.service entered failed state.
- <30>acpid[1378]: starting up with proc fs
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- FS-Cache: Loaded
- FS-Cache: Netfs 'nfs' registered for caching
- eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
- [drm] Initialized drm 1.1.0 20060810
- i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- i915 0000:00:02.0: setting latency timer to 64
- [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [drm] Driver supports precise vblank timestamp query.
- vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [drm] initialized overlay support
- checking generic (f0000000 7d0000) vs hw (f0000000 8000000)
- fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
- Console: switching to colour dummy device 80x25
- fbcon: inteldrmfb (fb0) is primary device
- Console: switching to colour frame buffer device 128x48
- fb0: inteldrmfb frame buffer device
- drm: registered panic notifier
- [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- eth0: no IPv6 routers present
- Bluetooth: Core ver 2.15
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP ver 2.15
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- Bluetooth: BNEP filters: protocol multicast
- Bluetooth: SCO (Voice Link) ver 0.6
- Bluetooth: SCO socket layer initialized
- hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
- hda: task_no_data_intr: error=0x04 { DriveStatusError }
- hda: possibly failed opcode: 0xef
- hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
- hda: task_no_data_intr: error=0x04 { DriveStatusError }
- hda: possibly failed opcode: 0xef
- hda: cache flushes supported
- hdd: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
- hdd: task_no_data_intr: error=0x04 { DriveStatusError }
- hdd: possibly failed opcode: 0xef
- hdd: cache flushes not supported
- EXT4-fs (hdd1): re-mounted. Opts: commit=0
- EXT4-fs (hdd6): re-mounted. Opts: commit=0
- [root@localhost aminata]#
- Kernel 3.09
- [root@localhost no]# dmesg
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 3.0.9-1mdv (mandrake@n8.mandriva.com) (gcc version 4.6.1 20110627 (Mandriva) (GCC) ) #1 SMP PREEMPT Tue Nov 15 16:20:00 UTC 2011
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000003f740000 (usable)
- BIOS-e820: 000000003f740000 - 000000003f750000 (ACPI data)
- BIOS-e820: 000000003f750000 - 000000003f800000 (ACPI NVS)
- BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
- Notice: NX (Execute Disable) protection missing in CPU!
- DMI 2.3 present.
- DMI: Hewlett-Packard HP dx2000 MT(PL091ET)/08FCh, BIOS 1.16 07/04/2005
- e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- last_pfn = 0x3f740 max_arch_pfn = 0x100000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-DFFFF uncachable
- E0000-EFFFF write-through
- F0000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 000000000 mask FC0000000 write-back
- 1 base 03F800000 mask FFF800000 uncachable
- 2 disabled
- 3 disabled
- 4 disabled
- 5 disabled
- 6 disabled
- 7 disabled
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- found SMP MP-table at [c00ff780] ff780
- initial memory mapped : 0 - 01c00000
- Base memory trampoline at [c009b000] 9b000 size 16384
- init_memory_mapping: 0000000000000000-00000000377fe000
- 0000000000 - 0000400000 page 4k
- 0000400000 - 0037400000 page 2M
- 0037400000 - 00377fe000 page 4k
- kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
- RAMDISK: 36178000 - 37ff0000
- Allocated new RAMDISK: 34300000 - 36177ede
- Move RAMDISK from 0000000036178000 - 0000000037fefedd to 34300000 - 36177edd
- ACPI: RSDP 000f7190 00014 (v00 COMPAQ)
- ACPI: RSDT 3f740000 00030 (v01 COMPAQ INTEL865 07000504 MSFT 00000097)
- ACPI: FACP 3f740200 00081 (v02 COMPAQ INTEL865 07000504 MSFT 00000097)
- ACPI: DSDT 3f740360 03773 (v01 COMPAQ INTEL865 00000116 INTL 02002026)
- ACPI: FACS 3f750000 00040
- ACPI: APIC 3f740300 0005C (v01 COMPAQ INTEL865 07000504 MSFT 00000097)
- ACPI: OEMB 3f750040 00040 (v01 COMPAQ OEMBIOS 07000504 MSFT 00000097)
- ACPI: Local APIC address 0xfee00000
- 127MB HIGHMEM available.
- 887MB LOWMEM available.
- mapped low ram: 0 - 377fe000
- low ram: 0 - 377fe000
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- Normal 0x00001000 -> 0x000377fe
- HighMem 0x000377fe -> 0x0003f740
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000010 -> 0x0000009f
- 0: 0x00000100 -> 0x0003f740
- On node 0 totalpages: 259791
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3951 pages, LIFO batch:0
- Normal zone: 1744 pages used for memmap
- Normal zone: 221486 pages, LIFO batch:31
- HighMem zone: 255 pages used for memmap
- HighMem zone: 32323 pages, LIFO batch:7
- Using APIC driver default
- ACPI: PM-Timer IO Port: 0x808
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
- ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- SMP: Allowing 2 CPUs, 1 hotplug CPUs
- nr_irqs_gsi: 40
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- Allocating PCI resources starting at 3f800000 (gap: 3f800000:c0380000)
- Booting paravirtualized kernel on bare hardware
- setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- PERCPU: Embedded 12 pages/cpu @f6800000 s24928 r0 d24224 u2097152
- pcpu-alloc: s24928 r0 d24224 u2097152 alloc=1*4194304
- pcpu-alloc: [0] 0 1
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257760
- Kernel command line: BOOT_IMAGE=3.0.9-1 root=UUID=77da7ba8-6892-4ee5-a9f7-baae6504fbfb nokmsboot logo.nologo quiet resume=UUID=534d6ce7-c28e-4767-866f-53ddce53198d splash=silent vga=788
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Initializing CPU#0
- Initializing HighMem for node 0 (000377fe:0003f740)
- Memory: 991868k/1039616k available (3717k kernel code, 47296k reserved, 2000k data, 520k init, 130312k highmem)
- virtual kernel memory layout:
- fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- .init : 0xc1596000 - 0xc1618000 ( 520 kB)
- .data : 0xc13a156a - 0xc1595600 (2000 kB)
- .text : 0xc1000000 - 0xc13a156a (3717 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- Preemptible hierarchical RCU implementation.
- NR_IRQS:512
- CPU 0 irqstacks, hard=f640c000 soft=f640e000
- Console: colour dummy device 80x25
- console [tty0] enabled
- allocated 4194304 bytes of page_cgroup
- please try 'cgroup_disable=memory' option if you don't want memory cgroups
- Fast TSC calibration using PIT
- Detected 2660.036 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.07 BogoMIPS (lpj=26600360)
- pid_max: default: 32768 minimum: 301
- Security Framework initialized
- TOMOYO Linux initialized
- Mount-cache hash table entries: 512
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys memory
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys net_cls
- Initializing cgroup subsys blkio
- Initializing cgroup subsys perf_event
- CPU0: Hyper-Threading is disabled
- mce: CPU supports 4 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- using mwait in idle threads.
- SMP alternatives: switching to UP code
- ACPI: Core revision 20110413
- ftrace: allocating 17825 entries in 35 pages
- Enabling APIC mode: Flat. Using 1 I/O APICs
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 01
- Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
- ... version: 0
- ... bit width: 40
- ... generic registers: 18
- ... value mask: 000000ffffffffff
- ... max period: 0000007fffffffff
- ... fixed-purpose events: 0
- ... event mask: 000000000003ffff
- Brought up 1 CPUs
- Total of 1 processors activated (5320.07 BogoMIPS).
- devtmpfs: initialized
- PM: Registering ACPI NVS region at 3f750000 (720896 bytes)
- print_constraints: dummy:
- Time: 14:42:43 Date: 11/19/11
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: Executed 1 blocks of module-level executable AML code
- ACPI: Interpreter enabled
- ACPI: (supports S0 S3 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- ACPI: Power Resource [GFAN] (on)
- ACPI: No dock devices found.
- HEST: Table not found.
- PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0x3f800000-0xffefffff] (ignored)
- pci 0000:00:00.0: [8086:2570] type 0 class 0x000600
- pci 0000:00:00.0: Enabling MCH 'Overflow' Device
- pci 0000:00:00.0: reg 10: [mem 0xfe800000-0xfebfffff pref]
- pci 0000:00:02.0: [8086:2572] type 0 class 0x000300
- pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
- pci 0000:00:02.0: reg 14: [mem 0xfe780000-0xfe7fffff]
- pci 0000:00:02.0: reg 18: [io 0xec00-0xec07]
- pci 0000:00:06.0: [8086:2576] type 0 class 0x000880
- pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
- pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
- pci 0000:00:1d.0: reg 20: [io 0xdc00-0xdc1f]
- pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
- pci 0000:00:1d.1: reg 20: [io 0xe000-0xe01f]
- pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
- pci 0000:00:1d.2: reg 20: [io 0xe400-0xe41f]
- pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
- pci 0000:00:1d.3: reg 20: [io 0xe800-0xe81f]
- pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
- pci 0000:00:1d.7: reg 10: [mem 0xfe77bc00-0xfe77bfff]
- pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.7: PME# disabled
- pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
- pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
- pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
- pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
- pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
- pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
- pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
- pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
- pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f]
- pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
- pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
- pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
- pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401
- pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff]
- pci 0000:00:1f.5: reg 14: [io 0xd400-0xd43f]
- pci 0000:00:1f.5: reg 18: [mem 0xfe77b800-0xfe77b9ff]
- pci 0000:00:1f.5: reg 1c: [mem 0xfe77b400-0xfe77b4ff]
- pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
- pci 0000:00:1f.5: PME# disabled
- pci 0000:01:02.0: [10ec:8139] type 0 class 0x000200
- pci 0000:01:02.0: reg 10: [io 0xb800-0xb8ff]
- pci 0000:01:02.0: reg 14: [mem 0xfe5ffc00-0xfe5ffcff]
- pci 0000:01:02.0: reg 30: [mem 0xfe5e0000-0xfe5effff pref]
- pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
- pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
- pci 0000:00:1e.0: bridge window [mem 0xfe500000-0xfe5fffff]
- pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
- pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- vgaarb: bridge control possible 0000:00:02.0
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- reserve RAM buffer: 000000000009fc00 - 000000000009ffff
- reserve RAM buffer: 000000003f740000 - 000000003fffffff
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- hpet clockevent registered
- HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- Switching to clocksource hpet
- Switched to NOHz mode on CPU #0
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:00: [bus 00-ff]
- pnp 00:00: [io 0x0cf8-0x0cff]
- pnp 00:00: [io 0x0000-0x0cf7 window]
- pnp 00:00: [io 0x0d00-0xffff window]
- pnp 00:00: [mem 0x000a0000-0x000bffff window]
- pnp 00:00: [mem 0x00000000 window]
- pnp 00:00: [mem 0x3f800000-0xffefffff window]
- pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- pnp 00:01: [dma 4]
- pnp 00:01: [io 0x0000-0x000f]
- pnp 00:01: [io 0x0081-0x0083]
- pnp 00:01: [io 0x0087]
- pnp 00:01: [io 0x0089-0x008b]
- pnp 00:01: [io 0x008f]
- pnp 00:01: [io 0x00c0-0x00df]
- pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:02: [io 0x0070-0x0071]
- pnp 00:02: [irq 8]
- pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- pnp 00:03: [io 0x0061]
- pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
- pnp 00:04: [io 0x00f0-0x00ff]
- pnp 00:04: [irq 13]
- pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- pnp 00:05: [irq 4]
- pnp 00:05: [dma 0 disabled]
- pnp 00:05: [io 0x03f8-0x03ff]
- pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:06: [irq 6]
- pnp 00:06: [dma 2]
- pnp 00:06: [io 0x03f0-0x03f5]
- pnp 00:06: [io 0x03f7]
- pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
- pnp 00:07: [irq 7]
- pnp 00:07: [dma 0 disabled]
- pnp 00:07: [io 0x0378-0x037f]
- pnp 00:07: [io 0x0778-0x077f]
- pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
- pnp 00:08: [io 0x0010-0x001f]
- pnp 00:08: [io 0x0022-0x003f]
- pnp 00:08: [io 0x0044-0x005f]
- pnp 00:08: [io 0x0062-0x0063]
- pnp 00:08: [io 0x0065-0x006f]
- pnp 00:08: [io 0x0072-0x007f]
- pnp 00:08: [io 0x0080]
- pnp 00:08: [io 0x0084-0x0086]
- pnp 00:08: [io 0x0088]
- pnp 00:08: [io 0x008c-0x008e]
- pnp 00:08: [io 0x0090-0x009f]
- pnp 00:08: [io 0x00a2-0x00bf]
- pnp 00:08: [io 0x00e0-0x00ef]
- pnp 00:08: [io 0x04d0-0x04d1]
- pnp 00:08: [io 0x0800-0x087f]
- pnp 00:08: [io 0x0000-0xffffffff disabled]
- pnp 00:08: [io 0x0480-0x04bf]
- pnp 00:08: [mem 0xfed20000-0xfed8ffff]
- pnp 00:08: [mem 0xffb00000-0xffbfffff]
- system 00:08: [io 0x04d0-0x04d1] has been reserved
- system 00:08: [io 0x0800-0x087f] has been reserved
- system 00:08: [io 0x0480-0x04bf] has been reserved
- system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
- system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved
- system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:09: [mem 0xfec00000-0xfec00fff]
- pnp 00:09: [mem 0xfee00000-0xfee00fff]
- system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
- system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
- system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0a: [io 0x0060]
- pnp 00:0a: [io 0x0064]
- pnp 00:0a: [irq 1]
- pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- pnp 00:0b: [irq 12]
- pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
- pnp 00:0c: [io 0x0000-0xffffffff disabled]
- pnp 00:0c: [io 0x0900-0x097f]
- system 00:0c: [io 0x0900-0x097f] has been reserved
- system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0d: [mem 0x00000000-0x0009ffff]
- pnp 00:0d: [mem 0x000c0000-0x000dffff]
- pnp 00:0d: [mem 0x000e0000-0x000fffff]
- pnp 00:0d: [mem 0x00100000-0x3f7fffff]
- pnp 00:0d: [mem 0xfff00000-0xffffffff]
- system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
- system 00:0d: [mem 0x000c0000-0x000dffff] could not be reserved
- system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
- system 00:0d: [mem 0x00100000-0x3f7fffff] could not be reserved
- system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
- system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp: PnP ACPI: found 14 devices
- ACPI: ACPI bus type pnp unregistered
- PCI: max bus depth: 1 pci_try_num: 2
- pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
- pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
- pci 0000:00:1e.0: PCI bridge to [bus 01-01]
- pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
- pci 0000:00:1e.0: bridge window [mem 0xfe500000-0xfe5fffff]
- pci 0000:00:1e.0: bridge window [mem pref disabled]
- pci 0000:00:1e.0: setting latency timer to 64
- pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
- pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
- pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff]
- pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
- pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- pci 0000:00:02.0: Boot video device
- PCI: CLS 0 bytes, default 64
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 31200k freed
- audit: initializing netlink socket (disabled)
- type=2000 audit(1321713763.090:1): initialized
- highmem bounce pool size: 64 pages
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 1743
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- vesafb: mode is 800x600x16, linelength=1600, pages=7
- vesafb: scrolling: redraw
- vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
- vesafb: framebuffer at 0xf0000000, mapped to 0xf8080000, using 1875k, total 8000k
- fbcon: VESA VGA (fb0) is primary device
- Console: switching to colour frame buffer device 100x37
- fb0: VESA VGA frame buffer device
- ERST: Table is not found!
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- Linux agpgart interface v0.103
- brd: module loaded
- i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mousedev: PS/2 mouse device common for all mice
- rtc_cmos 00:02: RTC can wake from S4
- rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
- cpuidle: using governor ladder
- cpuidle: using governor menu
- Registering the dns_resolver key type
- Using IPI No-Shortcut mode
- PM: Checking hibernation image partition UUID=534d6ce7-c28e-4767-866f-53ddce53198d
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- psmouse serio1: ID: 10 00 64
- Refined TSC clocksource calibration: 2659.999 MHz.
- Switching to clocksource tsc
- input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
- PM: Hibernation image not present or could not be loaded.
- registered taskstats version 1
- Magic number: 3:627:738
- rtc_cmos 00:02: setting system clock to 2011-11-19 14:42:45 UTC (1321713765)
- BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
- Freeing unused kernel memory: 520k freed
- dracut: dracut-010-6
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- loop: module loaded
- udevd[105]: starting version 168
- dracut: Starting plymouth daemon
- Floppy drive(s): fd0 is 1.44M
- 8139too: 8139too Fast Ethernet driver 0.9.28
- 8139too 0000:01:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- 8139too 0000:01:02.0: eth0: RealTek RTL8139 at 0xf82f4c00, 00:50:fc:24:dc:66, IRQ 17
- 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- FDC 0 is a post-1991 82077
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- uhci_hcd 0000:00:1d.0: setting latency timer to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
- uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000dc00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: UHCI Host Controller
- usb usb1: Manufacturer: Linux 3.0.9-1mdv uhci_hcd
- usb usb1: SerialNumber: 0000:00:1d.0
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- uhci_hcd 0000:00:1d.1: setting latency timer to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: UHCI Host Controller
- usb usb2: Manufacturer: Linux 3.0.9-1mdv uhci_hcd
- usb usb2: SerialNumber: 0000:00:1d.1
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- uhci_hcd 0000:00:1d.2: setting latency timer to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: UHCI Host Controller
- usb usb3: Manufacturer: Linux 3.0.9-1mdv uhci_hcd
- usb usb3: SerialNumber: 0000:00:1d.2
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- uhci_hcd 0000:00:1d.3: setting latency timer to 64
- uhci_hcd 0000:00:1d.3: UHCI Host Controller
- uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e800
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: UHCI Host Controller
- usb usb4: Manufacturer: Linux 3.0.9-1mdv uhci_hcd
- usb usb4: SerialNumber: 0000:00:1d.3
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
- ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
- ehci_hcd 0000:00:1d.7: setting latency timer to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
- ehci_hcd 0000:00:1d.7: debug port 1
- ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
- ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe77bc00
- SCSI subsystem initialized
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb5: Product: EHCI Host Controller
- usb usb5: Manufacturer: Linux 3.0.9-1mdv ehci_hcd
- usb usb5: SerialNumber: 0000:00:1d.7
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 8 ports detected
- libata version 3.00 loaded.
- ata_piix 0000:00:1f.1: version 2.13
- ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
- ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- ata_piix 0000:00:1f.1: setting latency timer to 64
- scsi0 : ata_piix
- scsi1 : ata_piix
- ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
- ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
- ata2.00: ATAPI: DVD-RW IDE1004, VER 0040, max UDMA/66
- ata2.01: ATA-5: WDC WD200BB-00GFA0, 09.01B09, max UDMA/100
- ata2.01: 39102336 sectors, multi 16: LBA
- ata2.00: configured for UDMA/66
- ata1.00: ATA-6: ST340014A, 8.11, max UDMA/100
- ata1.00: 78165360 sectors, multi 16: LBA
- ata2.01: configured for UDMA/100
- ata1.00: configured for UDMA/100
- scsi 0:0:0:0: Direct-Access ATA ST340014A 8.11 PQ: 0 ANSI: 5
- scsi 1:0:0:0: CD-ROM DVDRW IDE1004 0040 PQ: 0 ANSI: 5
- scsi 1:0:1:0: Direct-Access ATA WDC WD200BB-00GF 09.0 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1
- sd 0:0:0:0: [sda] Attached SCSI disk
- sr0: scsi3-mmc drive: 1x/40x writer cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 1:0:0:0: Attached scsi CD-ROM sr0
- sd 1:0:1:0: [sdb] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
- sd 1:0:1:0: [sdb] Write Protect is off
- sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
- sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sdb: sdb1 sdb2 < sdb5 sdb6 >
- sd 1:0:1:0: [sdb] Attached SCSI disk
- usb 3-2: new full speed USB device number 2 using uhci_hcd
- usb 3-2: New USB device found, idVendor=04f9, idProduct=0155
- usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
- usb 3-2: SerialNumber: BROK3J851383
- PM: Marking nosave pages: 000000000009f000 - 0000000000100000
- PM: Basic memory bitmaps created
- PM: Basic memory bitmaps freed
- PM: Starting manual resume from disk
- PM: Hibernation image partition 8:21 present
- PM: Looking for hibernation image.
- PM: Image not found (code -22)
- PM: Hibernation image not present or could not be loaded.
- EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
- dracut: Checking filesystems
- dracut: fsck -T -t noopts=_netdev -A -a
- dracut: /dev/sdb1: clean, 232512/637728 files, 1591823/2550310 blocks
- dracut: Remounting /dev/disk/by-uuid/77da7ba8-6892-4ee5-a9f7-baae6504fbfb with -o ro,
- EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
- dracut: Mounted root filesystem /dev/sdb1
- dracut: Switching root
- Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
- systemd[1]: systemd 29 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +SYSVINIT +LIBCRYPTSETUP; mandriva)
- NET: Registered protocol family 10
- systemd[1]: Set hostname to <localhost.localdomain>.
- systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
- systemd[1]: [/etc/rc.d/init.d/ip6tables:19] Failed to add LSB Provides name firewall.service, ignoring: File exists
- EXT4-fs (sdb1): re-mounted. Opts: (null)
- udevd[385]: starting version 168
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:73
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:76
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:77
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:78
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:79
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:80
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:81
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:82
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:83
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:84
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:85
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:86
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:87
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:88
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:89
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:90
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:91
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:92
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:93
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:94
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:95
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:96
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:97
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:98
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:99
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:100
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:101
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:105
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:106
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:107
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:108
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:109
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:110
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:111
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:112
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:113
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:114
- udevd[385]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:115
- udevd[385]: NAME="%k" is ignored, because it breaks kernel supplied names, please remove it from /etc/udev/rules.d/51-hso-udev.rules:124
- agpgart-intel 0000:00:00.0: Intel 865 Chipset
- agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
- agpgart-intel 0000:00:00.0: detected 8192K stolen memory
- agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
- iTCO_vendor_support: vendor-support=0
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
- iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
- iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
- intel_rng: FWH not detected
- ACPI: acpi_idle registered with cpuidle
- input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
- ACPI: Power Button [PWRB]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- ACPI: Power Button [PWRF]
- ACPI: Fan [FN00] (on)
- i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [Firmware Bug]: Invalid critical threshold (2732)
- ACPI: Invalid passive threshold
- [Firmware Bug]: No valid trip found
- mtp-probe[624]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2"
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sr 1:0:0:0: Attached scsi generic sg1 type 5
- sd 1:0:1:0: Attached scsi generic sg2 type 0
- parport_pc 00:07: reported by Plug and Play ACPI
- parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
- mtp-probe[624]: bus: 3, device: 2 was not an MTP device
- mtp-probe[817]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2"
- Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- Intel ICH 0000:00:1f.5: setting latency timer to 64
- mtp-probe[817]: bus: 3, device: 2 was not an MTP device
- intel8x0_measure_ac97_clock: measured 116218 usecs (5588 samples)
- intel8x0: clocking to 48000
- usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0155
- usbcore: registered new interface driver usblp
- Adding 1116480k swap on /dev/sdb5. Priority:0 extents:1 across:1116480k
- ppdev: user-space parallel port driver
- fuse init (API version 7.16)
- ntfs-3g[1138]: Version 2011.4.12 external FUSE 28
- ntfs-3g[1138]: Mounted /dev/sda1 (Read-Write, label "", NTFS 3.1)
- ntfs-3g[1138]: Cmdline options: rw,nosuid,nodev,locale=fr_FR.UTF-8
- ntfs-3g[1138]: Mount options: rw,nosuid,nodev,allow_other,nonempty,atime,fsname=/dev/sda1,blkdev,blksize=4096
- ntfs-3g[1138]: Ownership and permissions disabled, configuration type 1
- udev-configure-printer[1037]: main()
- systemd-fsck[1048]: /dev/sdb6 : propre, 2764/515088 fichiers, 153526/2058320 blocs
- EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
- systemd-tmpfiles[1295]: [/usr/lib/tmpfiles.d/legacy.conf:22] Unknown group 'lock'.
- systemd[1]: systemd-tmpfiles-setup.service: main process exited, code=exited, status=1
- systemd[1]: Unit systemd-tmpfiles-setup.service entered failed state.
- acpid[1351]: starting up with proc fs
- acpid[1351]: 2 rules loaded
- acpid[1351]: waiting for events: event logging is off
- systemd[1]: lm_sensors.service: main process exited, code=exited, status=1
- systemd[1]: Unit lm_sensors.service entered failed state.
- avahi-daemon[1332]: Found user 'avahi' (UID 498) and group 'avahi' (GID 498).
- avahi-daemon[1332]: Successfully dropped root privileges.
- avahi-daemon[1332]: avahi-daemon 0.6.29 starting up.
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- crond[1555]: (CRON) STARTUP (1.4.7)
- crond[1555]: (CRON) INFO (Syslog will be used instead of sendmail.): Aucun fichier ou dossier de ce type
- xinetd[1516]: Reading included configuration file: /etc/xinetd.d/cups-lpd [file=/etc/xinetd.conf] [line=15]
- xinetd[1516]: Reading included configuration file: /etc/xinetd.d/rsync [file=/etc/xinetd.d/rsync] [line=12]
- xinetd[1516]: Reading included configuration file: /etc/xinetd.d/sshd-xinetd [file=/etc/xinetd.d/sshd-xinetd] [line=12]
- xinetd[1516]: Reading included configuration file: /etc/xinetd.d/swat [file=/etc/xinetd.d/swat] [line=16]
- xinetd[1516]: removing printer
- xinetd[1516]: removing rsync
- xinetd[1516]: removing ssh
- xinetd[1516]: removing swat
- xinetd[1516]: xinetd Version 2.3.14 started with libwrap options compiled in.
- xinetd[1516]: Started working: 0 available services
- crond[1555]: (CRON) INFO (running with inotify support)
- su[1503]: pam_tcb(su-l:session): Session opened for root by (uid=0)
- avahi-daemon[1332]: Successfully called chroot().
- avahi-daemon[1332]: Successfully dropped remaining capabilities.
- avahi-daemon[1332]: Loading service file /services/openssh.service.
- systemd[1]: vboxadd-timesync.service: control process exited, code=exited status=1
- systemd[1]: Unit vboxadd-timesync.service entered failed state.
- avahi-daemon[1332]: Loading service file /services/sftp-ssh.service.
- avahi-daemon[1332]: Loading service file /services/udisks.service.
- avahi-daemon[1332]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
- avahi-daemon[1332]: Network interface enumeration completed.
- avahi-daemon[1332]: Registering HINFO record with values 'I686'/'LINUX'.
- avahi-daemon[1332]: Server startup complete. Host name is linux.local. Local service cookie is 1099348168.
- avahi-daemon[1332]: Service "linux" (/services/udisks.service) successfully established.
- avahi-daemon[1332]: Service "linux" (/services/sftp-ssh.service) successfully established.
- avahi-daemon[1332]: Service "Remote Access on linux" (/services/openssh.service) successfully established.
- udev-configure-printer[1037]: do_add()
- udev-configure-printer[1600]: add /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0
- udev-configure-printer[1600]: read_usb_uri_map()
- udev-configure-printer[1600]: device_id_from_devpath()
- udev-configure-printer[1600]: parent devpath is /devices/pci0000:00/0000:00:1d.2/usb3/3-2
- udev-configure-printer[1600]: Device vendor/product is 04F9:0155
- udev-configure-printer[1606]: main()
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- FS-Cache: Loaded
- FS-Cache: Netfs 'nfs' registered for caching
- 8139too 0000:01:02.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
- [drm] Initialized drm 1.1.0 20060810
- i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- i915 0000:00:02.0: setting latency timer to 64
- [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [drm] Driver supports precise vblank timestamp query.
- vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [drm] initialized overlay support
- checking generic (f0000000 7d0000) vs hw (f0000000 8000000)
- fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
- Console: switching to colour dummy device 80x25
- fbcon: inteldrmfb (fb0) is primary device
- Console: switching to colour frame buffer device 128x48
- fb0: inteldrmfb frame buffer device
- drm: registered panic notifier
- [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- eth0: no IPv6 routers present
- Bluetooth: Core ver 2.16
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: SCO socket layer initialized
- Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- Bluetooth: BNEP filters: protocol multicast
- ata1.00: configured for UDMA/100
- ata1: EH complete
- ata2.00: configured for UDMA/66
- ata2.01: configured for UDMA/100
- ata2: EH complete
- EXT4-fs (sdb1): re-mounted. Opts: commit=0
- EXT4-fs (sdb6): re-mounted. Opts: commit=0
- [root@localhost aminata]#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement