Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.75-1-ARCH (odroid@alarm) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Tue Dec 31 17:57:09 GMT 2013
- [ 0.000000] CPU: ARMv7 Processor [412fc0f3] revision 3 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: ODROIDXU
- [ 0.000000] S5P/CMA: Reserved 0x08000000@0xb7e00000 for 'ion'
- [ 0.000000] S5P/CMA: Reserved 0x00100000@0xb7d00000 for 'drm_mfc_sh'
- [ 0.000000] S5P/CMA: Reserved 0x00c00000@0xb7100000 for 'drm_g2d_wfd'
- [ 0.000000] S5P/CMA: Reserved 0x00400000@0xac000000 for 'drm_sectbl'
- [ 0.000000] S5P/CMA: Reserved 0x00100000@0xac400000 for 'drm_mfc_fw'
- [ 0.000000] S5P/CMA: Reserved 0x01000000@0xac500000 for 'drm_mfc_input'
- [ 0.000000] S5P/CMA: Reserved 0x03b00000@0xad500000 for 'drm_mfc_output'
- [ 0.000000] S5P/CMA: Reserved 0x03000000@0xb1000000 for 'drm_fimd_video'
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] CPU EXYNOS5410 (id 0xe5410023)
- [ 0.000000] exynos5_init_clocks: initializing clocks
- [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [ 0.000000] exynos5410_setup_clocks: registering clocks
- [ 0.000000] exynos5410_setup_clocks: xtal is 24000000
- [ 0.000000] EXYNOS5: EAGLECLK=900000000, KFCCLK=600000000, CDREX=800000000
- [ 0.000000] On node 0 totalpages: 523776
- [ 0.000000] free_area_init_node: node 0, pgdat c09fc680, node_mem_map c0beb000
- [ 0.000000] Normal zone: 1116 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 125860 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 3488 pages used for memmap
- [ 0.000000] HighMem zone: 393312 pages, LIFO batch:31
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1df8000 s12032 r8192 d12544 u32768
- [ 0.000000] pcpu-alloc: s12032 r8192 d12544 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519172
- [ 0.000000] Kernel command line: console=ttySAC2,115200n8 vmalloc=512M console=ttySAC2,115200n8 root=/dev/mmcblk0p2 rootwait rw left=56 right=24 upper=3 lower=3 vsync=3 hsync=14 fb_x_res=1280 fb_y_res=800 vout=lcd hdmi_phy_res=1080p60hz led_blink=off
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] allocated 4190208 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 2046MB = 2046MB total
- [ 0.000000] Memory: 1784280k/1784280k available, 310824k reserved, 1311744K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0935000 (9396 kB)
- [ 0.000000] .init : 0xc0935000 - 0xc0970f00 ( 240 kB)
- [ 0.000000] .data : 0xc0972000 - 0xc0a0fd80 ( 632 kB)
- [ 0.000000] .bss : 0xc0a0fda4 - 0xc0beac78 (1900 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:693
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000114] Calibrating delay loop... 1785.85 BogoMIPS (lpj=4464640)
- [ 0.045043] pid_max: default: 32768 minimum: 301
- [ 0.045328] Mount-cache hash table entries: 512
- [ 0.046127] Initializing cgroup subsys debug
- [ 0.046140] Initializing cgroup subsys cpuacct
- [ 0.046150] Initializing cgroup subsys memory
- [ 0.046187] Initializing cgroup subsys devices
- [ 0.046203] Initializing cgroup subsys freezer
- [ 0.046269] CPU: Testing write buffer coherency: ok
- [ 0.046413] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.046471] Setting up static identity map for 0x406c5d08 - 0x406c5d60
- [ 0.097691] CPU1: Booted secondary processor
- [ 0.097716] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.117696] CPU2: Booted secondary processor
- [ 0.117721] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.137684] CPU3: Booted secondary processor
- [ 0.137710] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.137852] Brought up 4 CPUs
- [ 0.137868] SMP: Total of 4 processors activated (7143.42 BogoMIPS).
- [ 0.138627] devtmpfs: initialized
- [ 0.154363] gpio: GPZ has no PM function
- [ 0.154837] NET: Registered protocol family 16
- [ 0.156104] Last reset was reset (RST_STAT=0x100)
- [ 0.159755] odroidxu_clkout_init [496] : clkout_clk = 24000000
- [ 0.162383] exynos5_odroidxu_display_init : LCD or HDMI or DVI Monitor!
- [ 0.162399] Virtual FB Size from Boot Parameter : X(1280), y(800)
- [ 0.163353] CCI is not supportedS3C Power Management, Copyright 2004 Simtec Electronics
- [ 0.164595] Failed to get (null) clock
- [ 0.164916] EXYNOS5410 PMU Initialize
- [ 0.165141] EXYNOS: Initializing architecture
- [ 0.165624] s3c24xx-pwm s3c24xx-pwm.0: tin at 2015151, tdiv at 2015151, tin=divclk, base 0
- [ 0.165726] s3c24xx-pwm s3c24xx-pwm.3: tin at 33250000, tdiv at 33250000, tin=divclk, base 16
- [ 0.166392] Exynos5410 : Lot ID is N68Z5[Non Special]
- [ 0.166404] Exynos5410 ASV : Use Fusing Speed Group 3
- [ 0.166413] Exynos5410 ASV : invalid IDS value
- [ 0.166424] EXYNOS5410 ASV : N68Z5 IDS : 0 HPM : 0
- [ 0.166443] VDD_ARM ASV group is 3
- [ 0.166498] VDD_KFC ASV group is 3
- [ 0.166511] VDD_INT_MIF_L0 ASV group is 3
- [ 0.166522] VDD_MIF ASV group is 3
- [ 0.166532] VDD_G3D ASV group is 3
- [ 0.166542] VDD_INT_MIF_L1 ASV group is 3
- [ 0.166553] VDD_INT_MIF_L2 ASV group is 3
- [ 0.166564] VDD_INT_MIF_L3 ASV group is 3
- [ 0.167079] Exynos Power mode List
- [ 0.167089] NAME CPU MIF INT CPU0 CPU1 CPU2 CPU3
- [ 0.167101] init 0 0 0 1 1 1 1
- [ 0.167111] quad 1600000 800000 400000 1 1 1 1
- [ 0.167123] quad_io 1800000 800000 400000 1 1 0 0
- [ 0.167133] quad_mem 1800000 800000 400000 1 1 0 0
- [ 0.167154] exynos_interface_init: failed to create sysfs interface
- [ 0.173923] bio: create slab <bio-0> at 0
- [ 0.175019] SCSI subsystem initialized
- [ 0.175612] usbcore: registered new interface driver usbfs
- [ 0.175688] usbcore: registered new interface driver hub
- [ 0.175787] usbcore: registered new device driver usb
- [ 0.176169] i2c-gpio i2c-gpio.2: using pins 77 (SDA) and 78 (SCL)
- [ 0.176405] i2c-gpio i2c-gpio.10: using pins 323 (SDA) and 311 (SCL)
- [ 0.176693] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [ 0.176706] s3c-i2c s3c2440-i2c.1: slave address 0x10
- [ 0.176718] s3c-i2c s3c2440-i2c.1: bus frequency set to 377 KHz
- [ 0.176934] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [ 0.176947] s3c-i2c s3c2440-i2c.0: slave address 0x10
- [ 0.176958] s3c-i2c s3c2440-i2c.0: bus frequency set to 377 KHz
- [ 0.177002] s3c-i2c s3c2440-i2c.2: no platform data
- [ 0.177020] s3c-i2c: probe of s3c2440-i2c.2 failed with error -22
- [ 0.177424] max77802 4-0009: device found
- [ 0.177435] max77802_irq_init+
- [ 0.177450] max77802_irq_init: gpio_irq=1
- [ 0.182364] max77802_irq_init-
- [ 0.187914] vdd_emmc range: Failed to create debugfs directory
- [ 0.205572] exynos5-i2c exynos5-hs-i2c.0: i2c-4: Exynos5 HS-I2C adapter
- [ 0.205644] Linux media interface: v0.10
- [ 0.205691] Linux video capture interface: v2.00
- [ 0.209463] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.209899] Bluetooth: Core ver 2.16
- [ 0.209940] NET: Registered protocol family 31
- [ 0.209950] Bluetooth: HCI device and connection manager initialized
- [ 0.209964] Bluetooth: HCI socket layer initialized
- [ 0.209976] Bluetooth: L2CAP socket layer initialized
- [ 0.210007] Bluetooth: SCO socket layer initialized
- [ 0.210311] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.210852] nfc: nfc_init: NFC Core ver 0.1
- [ 0.210906] NET: Registered protocol family 39
- [ 0.211142] Switching to clocksource mct-frc
- [ 0.238153] NET: Registered protocol family 2
- [ 0.238375] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.238842] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.239948] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- [ 0.241136] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.241149] TCP: reno registered
- [ 0.241163] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.241188] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.241491] NET: Registered protocol family 1
- [ 0.241826] RPC: Registered named UNIX socket transport module.
- [ 0.241839] RPC: Registered udp transport module.
- [ 0.241850] RPC: Registered tcp transport module.
- [ 0.241860] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.242926] big.LITTLE switcher initializing
- [ 0.248791] big.LITTLE switcher initialized
- [ 0.248949] s3c-adc samsung-adc-v5: operating without regulator "vdd" .
- [ 0.249018] s3c-adc samsung-adc-v5: attached adc driver
- [ 0.250040] highmem bounce pool size: 64 pages
- [ 0.255406] VFS: Disk quotas dquot_6.5.2
- [ 0.255643] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.257399] NFS: Registering the id_resolver key type
- [ 0.257866] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.258485] fuse init (API version 7.18)
- [ 0.258855] msgmni has been set to 922
- [ 0.260902] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.260917] io scheduler noop registered
- [ 0.260928] io scheduler deadline registered
- [ 0.260958] io scheduler cfq registered (default)
- [ 0.263739] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
- [ 0.263755] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.266339] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
- [ 0.266356] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.267033] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
- [ 0.267049] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [ 0.267263] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.268250] exynos4210-uart.0: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
- [ 0.268481] exynos4210-uart.1: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
- [ 0.268700] exynos4210-uart.2: ttySAC2 at MMIO 0x12c20000 (irq = 85) is a S3C6400/10
- [ 1.187510] console [ttySAC2] enabled
- [ 1.191368] exynos4210-uart.3: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
- [ 1.199369] ion_device_add_heap: can not insert multiple heaps with id 1
- [ 1.205524] ion_device_add_heap: can not insert multiple heaps with id 0
- [ 1.212414] PVR_K: PVRSRVDriverProbe(pDevice=c09bbe00)
- [ 1.217319] PVR_K: SysInitialise: start
- [ 1.222392] PVR_K: enable_gpu_power off fail with pm_runtime_suspended
- [ 1.227643] PVR_K: SysInitialise: end
- [ 1.253626] brd: module loaded
- [ 1.258376] loop: module loaded
- [ 1.260268] tun: Universal TUN/TAP device driver, 1.6
- [ 1.265106] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.271466] PPP generic driver version 2.4.2
- [ 1.275665] PPP BSD Compression module registered
- [ 1.280192] PPP Deflate Compression module registered
- [ 1.286171] PPP MPPE Compression module registered
- [ 1.289994] NET: Registered protocol family 24
- [ 1.294493] usbcore: registered new interface driver asix
- [ 1.299836] usbcore: registered new interface driver ax88179_178a
- [ 1.305894] usbcore: registered new interface driver cdc_ether
- [ 1.311707] usbcore: registered new interface driver cdc_subset
- [ 1.317616] usbcore: registered new interface driver ipheth
- [ 1.323179] usbcore: registered new interface driver cdc_ncm
- [ 1.328880] exynos-drd exynos-dwc3.0: Core ID Number: 0x5533
- [ 1.334390] exynos-drd exynos-dwc3.0: Release Number: 0x200a
- [ 1.340257] exynos-drd exynos-dwc3.0: IRQ: ID: 1
- [ 1.344732] exynos-drd exynos-dwc3.0: IRQ: VBUS: inactive
- [ 1.350315] exynos-drd exynos-dwc3.1: Core ID Number: 0x5533
- [ 1.355641] exynos-drd exynos-dwc3.1: Release Number: 0x200a
- [ 1.361483] exynos-drd exynos-dwc3.1: IRQ: VBUS: inactive
- [ 1.366952] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.396272] s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [ 1.400034] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [ 1.407137] s5p-ehci s5p-ehci: irq 103, io mem 0x12110000
- [ 1.421290] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
- [ 1.425766] hub 1-0:1.0: USB hub found
- [ 1.428981] hub 1-0:1.0: 3 ports detected
- [ 1.433387] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.439279] exynos-ohci exynos-ohci: Already power on PHY
- [ 1.444488] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
- [ 1.450497] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
- [ 1.458053] exynos-ohci exynos-ohci: irq 103, io mem 0x12120000
- [ 1.520713] hub 2-0:1.0: USB hub found
- [ 1.523057] hub 2-0:1.0: 3 ports detected
- [ 1.527521] exynos-drd exynos-dwc3.0: Core ID Number: 0x5533
- [ 1.532699] exynos-drd exynos-dwc3.0: Release Number: 0x200a
- [ 1.538292] exynos-xhci exynos-xhci.0: EXYNOS xHCI Host Controller
- [ 1.544446] exynos-xhci exynos-xhci.0: new USB bus registered, assigned bus number 3
- [ 1.552336] exynos-xhci exynos-xhci.0: irq 104, io mem 0x12000000
- [ 1.558633] xHCI xhci_add_endpoint called for root hub
- [ 1.558646] xHCI xhci_check_bandwidth called for root hub
- [ 1.558750] hub 3-0:1.0: USB hub found
- [ 1.561966] hub 3-0:1.0: 1 port detected
- [ 1.566141] exynos-xhci exynos-xhci.0: EXYNOS xHCI Host Controller
- [ 1.572027] exynos-xhci exynos-xhci.0: new USB bus registered, assigned bus number 4
- [ 1.580131] xHCI xhci_add_endpoint called for root hub
- [ 1.580143] xHCI xhci_check_bandwidth called for root hub
- [ 1.580251] hub 4-0:1.0: USB hub found
- [ 1.583471] hub 4-0:1.0: 1 port detected
- [ 1.587766] exynos-drd exynos-dwc3.1: Core ID Number: 0x5533
- [ 1.592996] exynos-drd exynos-dwc3.1: Release Number: 0x200a
- [ 1.598634] exynos-xhci exynos-xhci.1: EXYNOS xHCI Host Controller
- [ 1.604801] exynos-xhci exynos-xhci.1: new USB bus registered, assigned bus number 5
- [ 1.612684] exynos-xhci exynos-xhci.1: irq 232, io mem 0x12400000
- [ 1.618949] xHCI xhci_add_endpoint called for root hub
- [ 1.618961] xHCI xhci_check_bandwidth called for root hub
- [ 1.619070] hub 5-0:1.0: USB hub found
- [ 1.622350] hub 5-0:1.0: 1 port detected
- [ 1.626566] exynos-xhci exynos-xhci.1: EXYNOS xHCI Host Controller
- [ 1.632411] exynos-xhci exynos-xhci.1: new USB bus registered, assigned bus number 6
- [ 1.640507] xHCI xhci_add_endpoint called for root hub
- [ 1.640519] xHCI xhci_check_bandwidth called for root hub
- [ 1.640623] hub 6-0:1.0: USB hub found
- [ 1.643826] hub 6-0:1.0: 1 port detected
- [ 1.648197] usbcore: registered new interface driver cdc_acm
- [ 1.653351] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 1.661366] Initializing USB Mass Storage driver...
- [ 1.666309] usbcore: registered new interface driver usb-storage
- [ 1.672169] USB Mass Storage support registered.
- [ 1.676875] usbcore: registered new interface driver libusual
- [ 1.682529] usbcore: registered new interface driver ums-cypress
- [ 1.688606] usbcore: registered new interface driver usbserial
- [ 1.694334] usbcore: registered new interface driver usbserial_generic
- [ 1.700822] USB Serial support registered for generic
- [ 1.741287] usb 1-2: new high-speed USB device number 2 using s5p-ehci
- [ 1.879823] usbserial: USB Serial Driver core
- [ 1.986798] usb3503 4-0008: switched to HUB mode
- [ 1.989939] usb3503 4-0008: usb3503_probe: probed on hub mode
- [ 1.995975] exynos-ss-udc exynos-ss-udc.0: regs df8b2000, irq 104
- [ 2.002275] exynos-ss-udc exynos-ss-udc.1: regs df8be000, irq 232
- [ 2.008536] gadget: Gadget Serial v2.4
- [ 2.011744] gadget: g_serial ready
- [ 2.015174] exynos-ss-udc exynos-ss-udc.0: bound driver g_serial
- [ 2.021615] mousedev: PS/2 mouse device common for all mice
- [ 2.026818] odroid_keypad_init
- [ 2.029964] input: odroid-keypad as /devices/virtual/input/input0
- [ 2.035848] odroid_keypad_open
- [ 2.039075] --------------------------------------------------------
- [ 2.045205] odroid-keypad driver initialized!! Ver 1.0
- [ 2.050319] --------------------------------------------------------
- [ 2.056661] platform_driver_register 0
- [ 2.060528] usbcore: registered new interface driver xpad
- [ 2.188004] input: odroidxu-ts as /devices/platform/s3c2440-i2c.0/i2c-0/0-0048/input/input1
- [ 2.196099] odroidxu: Dummy touchscreen driver!
- [ 2.199444] i2c-core: driver [odroid-ts] using legacy suspend method
- [ 2.205742] i2c-core: driver [odroid-ts] using legacy resume method
- [ 2.212009] usb 1-3: new high-speed USB device number 3 using s5p-ehci
- [ 2.219078] max77802_rtc_probe
- [ 2.231363] max77802-rtc max77802-rtc: max77802_rtc_init_reg: bypass init
- [ 2.236703] max77802-rtc max77802-rtc: max77802_rtc_enable_wtsr: enable WTSR
- [ 2.271601] max77802_rtc_read_time: 112/0/15 1:26:56(0)
- [ 2.281497] max77802_rtc_read_alarm: 100/0/1 0:0:0(0)
- [ 2.291523] max77802_rtc_read_time: 112/0/15 1:26:56(0)
- [ 2.295503] max77802-rtc max77802-rtc: rtc core: registered max77802-rtc as rtc0
- [ 2.302676] max77802_irq_unmask: group=2, cur=0xfd
- [ 2.307800] i2c /dev entries driver
- [ 2.311873] gspca_main: v2.14.0 registered
- [ 2.315185] exynos-mdev.0: Media0[0xde315c00] was registered successfully
- [ 2.321948] exynos-mdev.1: Media1[0xde316000] was registered successfully
- [ 2.328770] exynos-mdev.2: Media2[0xde316400] was registered successfully
- [ 2.335528] s5p-mipi-csis.0
- [ 2.335533] : s5pcsis_probe : csis0 probe success
- [ 2.342850] s5p-mipi-csis.1
- [ 2.342855] : s5pcsis_probe : csis1 probe success
- [ 2.350413] s5p-mipi-csis.2
- [ 2.350418] : s5pcsis_probe : csis2 probe success
- [ 2.358391] hub 1-3:1.0: USB hub found
- [ 2.361486] hub 1-3:1.0: 3 ports detected
- [ 2.365383] [INFO]flite_probe:2214: FIMC-LITE0 probe success
- [ 2.371435] [INFO]flite_probe:2214: FIMC-LITE1 probe success
- [ 2.377194] [INFO]flite_probe:2214: FIMC-LITE2 probe success
- [ 2.383131] [INFO]gsc_probe:1559: gsc-0 registered successfully
- [ 2.389068] [INFO]gsc_probe:1559: gsc-1 registered successfully
- [ 2.394929] [INFO]gsc_probe:1559: gsc-2 registered successfully
- [ 2.400838] [INFO]gsc_probe:1559: gsc-3 registered successfully
- [ 2.405973] exynos5-scaler exynos5-scaler.0: ++sc_probe
- [ 2.411443] exynos5-scaler exynos5-scaler.0: scaler registered successfully
- [ 2.418143] Initialize JPEG driver
- [ 2.421743] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
- [ 2.428251] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
- [ 2.434804] Exynos Graphics 2D driver, (c) 2011 Samsung Electronics
- [ 2.441263] [fimg2d_probe] base address: 0x10850000
- [ 2.445809] [fimg2d_probe] irq: 123
- [ 2.449351] [fimg2d_clk_setup] aclk_acp(266000000) pclk_acp(133000000)
- [ 2.455827] [fimg2d_clk_setup] gate clk: fimg2d
- [ 2.460320] [fimg2d_probe] enable runtime pm
- [ 2.464570] [fimg2d_probe] register sysmmu page fault handler
- [ 2.470527] EXYNOS MFC V4L2 Driver, (c) 2010 Samsung Electronics
- [ 2.476381] s5p-mfc s5p-mfc-v6: s5p_mfc_probe()
- [ 2.476907] s5p-mfc s5p-mfc-v6: decoder registered as /dev/video6
- [ 2.482570] s5p-mfc s5p-mfc-v6: encoder registered as /dev/video7
- [ 2.488830] s5p_mfc_probe--
- [ 2.488913] i2c i2c-2: attached exynos hdcp into i2c adapter successfully
- [ 2.495237] i2c-core: driver [exynos_hdcp] using legacy suspend method
- [ 2.501686] i2c-core: driver [exynos_hdcp] using legacy resume method
- [ 2.508110] Samsung HDMI output driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
- [ 2.515923] s5p-hdmi exynos5-hdmi: hdmi ip version = 2
- [ 2.521270] s5p-hdmi exynos5-hdmi: probe sucessful
- [ 2.525653] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
- [ 2.533597] s5p-mixer s5p-mixer: probe start
- [ 2.537252] s5p-mixer s5p-mixer: mixer ip version = 2
- [ 2.542496] s5p-mixer s5p-mixer: resources acquired
- [ 2.547150] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
- [ 2.555493] s5p-mixer s5p-mixer: registered layer mxr0_graph0 as /dev/video16
- [ 2.562612] s5p-mixer s5p-mixer: registered layer mxr0_graph1 as /dev/video17
- [ 2.569686] s5p-mixer s5p-mixer: registered layer mxr1_graph2 as /dev/video18
- [ 2.576790] s5p-mixer s5p-mixer: registered layer mxr1_graph3 as /dev/video19
- [ 2.583812] s5p-mixer s5p-mixer: mixer0 create links
- [ 2.588742] s5p-mixer s5p-mixer: mixer1 create links
- [ 2.593654] s5p-mixer s5p-mixer: mixer links are created successfully
- [ 2.600051] s5p-mixer s5p-mixer: probe successful
- [ 2.604779] S5P CEC for Exynos4 Driver, (c) 2009 Samsung Electronics
- [ 2.611376] s5p-tvout-cec s5p-tvout-cec: probe successful
- [ 2.616512] exynos-rot exynos-rot: ++rot_probe
- [ 2.621045] exynos-rot exynos-rot: rotator registered successfully
- [ 2.627105] Initialize JPEG Hx driver
- [ 2.630915] exynos5-jpeg-hx exynos5-jpeg-hx: JPEG driver is registered to /dev/video14
- [ 2.638707] exynos5-jpeg-hx exynos5-jpeg-hx: JPEG driver is registered to /dev/video13
- [ 2.646599] usbcore: registered new interface driver uvcvideo
- [ 2.652148] USB Video Class driver (1.1.1)
- [ 2.656271] samsung-fake-battery samsung-fake-battery: samsung_fake_bat_probe
- [ 2.664651] Exynos: Kernel Thermal management registered
- [ 2.668764] usb 1-3.2: new full-speed USB device number 4 using s5p-ehci
- [ 2.675352] s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
- [ 2.682735] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled
- [ 2.690332] device-mapper: uevent: version 1.0.3
- [ 2.694948] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 2.703304] usbcore: registered new interface driver btusb
- [ 2.708915] cpuidle: using governor ladder
- [ 2.713038] cpuidle: using governor menu
- [ 2.716525] sdhci: Secure Digital Host Controller Interface driver
- [ 2.722644] sdhci: Copyright(c) Pierre Ossman
- [ 2.727097] Synopsys Designware Multimedia Card Interface Driver
- [ 2.732897] dw_mmc dw_mmc.0: Using internal DMA controller.
- [ 2.739070] dw_mmc dw_mmc.0: vmmc regulator found
- [ 2.743382] dw_mmc dw_mmc.0: vqmmc regulator found
- [ 2.749328] dw_mmc dw_mmc.0: Version ID is 241a
- [ 2.752483] dw_mmc dw_mmc.0: DW MMC controller at irq 107, 64 bit host data width, 128 deep fifo
- [ 2.761437] dw_mmc dw_mmc.2: Using internal DMA controller.
- [ 2.767432] dw_mmc dw_mmc.2: vmmc regulator found
- [ 2.771682] dw_mmc dw_mmc.2: vqmmc regulator found
- [ 2.776390] mmc_host mmc0: Bus speed (slot 0) = 20000000Hz (slot req 400000Hz, actual 400000HZ div = 25)
- [ 2.777940] dw_mmc dw_mmc.2: Version ID is 241a
- [ 2.777955] dw_mmc dw_mmc.2: DW MMC controller at irq 109, 64 bit host data width, 128 deep fifo
- [ 2.778599] usbcore: registered new interface driver usbhid
- [ 2.778610] usbhid: USB HID core driver
- [ 2.780554] ashmem: initialized
- [ 2.781117] logger: created 256K log 'log_main'
- [ 2.781691] logger: created 256K log 'log_events'
- [ 2.782209] logger: created 256K log 'log_radio'
- [ 2.782727] logger: created 256K log 'log_system'
- [ 2.784556] odroid_sysfs_init(471) : Sleep Disable Flag SET!!(Wake_lock_init)
- [ 2.791954] exynos5-i2c exynos5-hs-i2c.0: tx timeout
- [ 2.793223] generic-usb 0003:0483:5751.0001: hiddev0,hidraw0: USB HID v1.10 Device [Junsi Electronic Junsi iCharger 4010Duo USB HID] on usb-s5p-ehci-3.2/input0
- [ 2.795013] scsi0 : usb-storage 1-3.2:1.1
- [ 2.801335] exynos5-i2c exynos5-hs-i2c.0: tx timeout
- [ 2.801469] INA231 4-0040: I2C write error: (-121) reg: 0x0
- [ 2.801482] ============= Probe INA231 Fail! : sensor_arm (0xFFFFFF87) =============
- [ 2.801524] INA231: probe of 4-0040 failed with error -121
- [ 2.811391] exynos5-i2c exynos5-hs-i2c.0: tx timeout
- [ 2.821373] exynos5-i2c exynos5-hs-i2c.0: tx timeout
- [ 2.821503] INA231 4-0041: I2C write error: (-121) reg: 0x0
- [ 2.821515] ============= Probe INA231 Fail! : sensor_mem (0xFFFFFF87) =============
- [ 2.821552] INA231: probe of 4-0041 failed with error -121
- [ 2.831331] exynos5-i2c exynos5-hs-i2c.0: tx timeout
- [ 2.841331] exynos5-i2c exynos5-hs-i2c.0: tx timeout
- [ 2.841463] INA231 4-0044: I2C write error: (-121) reg: 0x0
- [ 2.841475] ============= Probe INA231 Fail! : sensor_g3d (0xFFFFFF87) =============
- [ 2.841516] INA231: probe of 4-0044 failed with error -121
- [ 2.851331] exynos5-i2c exynos5-hs-i2c.0: tx timeout
- [ 2.861328] exynos5-i2c exynos5-hs-i2c.0: tx timeout
- [ 2.861458] INA231 4-0045: I2C write error: (-121) reg: 0x0
- [ 2.861470] ============= Probe INA231 Fail! : sensor_kfc (0xFFFFFF87) =============
- [ 2.861506] INA231: probe of 4-0045 failed with error -121
- [ 2.861559] i2c-core: driver [INA231] using legacy suspend method
- [ 2.861571] i2c-core: driver [INA231] using legacy resume method
- [ 2.862027] odroidxu: ioboard: keyled probe
- [ 2.881540] usb 1-3.3: new high-speed USB device number 5 using s5p-ehci
- [ 3.060889] mmc_host mmc0: Bus speed (slot 0) = 160000000Hz (slot req 160000000Hz, actual 160000000HZ div = 0)
- [ 3.069555] dw_mmc dw_mmc.0: Start bit error (status=00002000)
- [ 3.077561] mmc0: new HS200 MMC card at address 0001
- [ 3.082132] mmcblk0: mmc0:0001 064G93 58.2 GiB
- [ 3.087445] mmcblk0: p1 p2
- [ 3.122570] mmc_host mmc1: Bus speed (slot 0) = 20000000Hz (slot req 400000Hz, actual 400000HZ div = 25)
- [ 3.182150] mmc_host mmc1: Bus speed (slot 0) = 20000000Hz (slot req 300000Hz, actual 294117HZ div = 34)
- [ 3.242155] mmc_host mmc1: Bus speed (slot 0) = 20000000Hz (slot req 200000Hz, actual 200000HZ div = 50)
- [ 3.307160] mmc_host mmc1: Bus speed (slot 0) = 20000000Hz (slot req 156863Hz, actual 156250HZ div = 64)
- [ 3.661252] hot state 0 to 1
- [ 3.701241] ioboard-bh1780 10-0029: I2C write byte error: data=0x8b
- [ 3.706027] =================== ioboard_bh1780_probe FAIL! ===================
- [ 3.716269] i2c-core: driver [ioboard-bh1780] using legacy suspend method
- [ 3.722962] i2c-core: driver [ioboard-bh1780] using legacy resume method
- [ 3.792525] scsi 0:0:0:0: Direct-Access Junsi SD Flash Disk 1.0 PQ: 0 ANSI: 2
- [ 3.800221] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 3.805583] sd 0:0:0:0: [sda] 3970048 512-byte logical blocks: (2.03 GB/1.89 GiB)
- [ 3.812876] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.816715] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
- [ 3.817472] sd 0:0:0:0: [sda] No Caching mode page found
- [ 3.822003] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 3.832467] sd 0:0:0:0: [sda] No Caching mode page found
- [ 3.836372] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 3.852004] sda: sda1
- [ 3.857095] sd 0:0:0:0: [sda] No Caching mode page found
- [ 3.860944] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 3.867130] sd 0:0:0:0: [sda] Attached SCSI removable disk
- [ 4.566243] =================== ioboard_bmp180_probe FAIL! ===================
- [ 4.575004] i2c-core: driver [ioboard-bmp180] using legacy suspend method
- [ 4.581730] i2c-core: driver [ioboard-bmp180] using legacy resume method
- [ 4.588501] odroidxu: ioboard: adc probe
- [ 4.594896] wait_until_ready : error!!
- [ 4.597197] ioboard_spi_write_enable : error!!
- [ 4.601616] =================== ioboard_spi_probe FAIL! ===================
- [ 4.611509] ioboard-spi: probe of spi1.0 failed with error -1
- [ 4.617796] usbcore: registered new interface driver snd-usb-audio
- [ 4.624500] soc-audio soc-audio.0: ASoC machine Odroid-max98090 should use snd_soc_register_card()
- [ 4.632834] samsung-i2s samsung-i2s.0: EPLL rate = 400000000
- [ 4.637956] samsung-i2s samsung-i2s.0: SRP rate = 100000000
- [ 4.643509] samsung-i2s samsung-i2s.0: BUS rate = 50000000
- [ 4.671706] max98090 1-0010: MAX98090 REVID=0x43
- [ 4.679605] asoc: HiFi <-> samsung-i2s.0 mapping ok
- [ 4.683612] asoc: HiFi <-> samsung-i2s.0 mapping ok
- [ 4.689716] GACT probability NOT on
- [ 4.691770] Mirror/redirect action on
- [ 4.695374] u32 classifier
- [ 4.698087] Actions configured
- [ 4.701472] Netfilter messages via NETLINK v0.30.
- [ 4.706430] TCP: bic registered
- [ 4.709248] TCP: cubic registered
- [ 4.712573] TCP: westwood registered
- [ 4.716097] TCP: htcp registered
- [ 4.719777] NET: Registered protocol family 10
- [ 4.724472] Mobile IPv6
- [ 4.726160] NET: Registered protocol family 17
- [ 4.730667] NET: Registered protocol family 15
- [ 4.735370] Bluetooth: RFCOMM TTY layer initialized
- [ 4.739905] Bluetooth: RFCOMM socket layer initialized
- [ 4.745004] Bluetooth: RFCOMM ver 1.11
- [ 4.748733] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 4.754021] Bluetooth: BNEP filters: protocol multicast
- [ 4.759225] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 4.765265] NET: Registered protocol family 33
- [ 4.770827] RxRPC: Registered security type 2 'rxkad'
- [ 4.774602] NET: Registered protocol family 35
- [ 4.779036] lib80211: common routines for IEEE802.11 drivers
- [ 4.784634] lib80211_crypt: registered algorithm 'NULL'
- [ 4.784646] Registering the dns_resolver key type
- [ 4.789702] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
- [ 4.796962] Registering SWP/SWPB emulation handler
- [ 4.804771] registered taskstats version 1
- [ 4.921330] s5p-mipi-dsim s5p-mipi-dsim.1: DSI Master driver has been completed.
- [ 4.927304] s5p-mipi-dsim s5p-mipi-dsim.1: DSI Master state is stop state
- [ 4.934049] s5p-mipi-dsim s5p-mipi-dsim.1: dsim_lcd_drv->probe is NULL.
- [ 5.210661] s5p-mipi-dsim s5p-mipi-dsim.1: mipi-dsi driver(RGB mode) has been probed.
- [ 5.224436] s3c-fb exynos5-fb.1: failed to find bootloader framebuffer
- [ 5.229556] s3c-fb exynos5-fb.1: couldn't copy bootloader framebuffer into default window; clearing instead
- [ 5.251198] s3c-fb exynos5-fb.1: window 0: fb
- [ 5.254869] vddq_lcd: incomplete constraints, leaving on
- [ 5.259536] uiCount = 2000
- [ 5.263729] PA FB = 0xB6D00000, bits per pixel = 32
- [ 5.268590] screen width=1280 height=800 va=0x0xres_virtual = 1280, yres_virtual = 800, xoffset = 0, yoffset = 0
- [ 5.278730] fb_size=8192000
- [ 5.281507] Back frameBuffer[0].VAddr=003e8000 PAddr=b68e8000 size=4096000
- [ 5.296531] max77802_rtc_read_time: 112/0/15 1:26:59(0)
- [ 5.300471] max77802-rtc max77802-rtc: setting system clock to 2012-01-15 01:26:59 UTC (1326590819)
- [ 5.309335] CPUFREQ of CA7 L0 : 1250000 uV
- [ 5.313488] CPUFREQ of CA7 L1 : 1250000 uV
- [ 5.317654] CPUFREQ of CA7 L2 : 1187500 uV
- [ 5.321812] CPUFREQ of CA7 L3 : 1125000 uV
- [ 5.325946] CPUFREQ of CA7 L4 : 1062500 uV
- [ 5.330162] CPUFREQ of CA7 L5 : 1012500 uV
- [ 5.334304] CPUFREQ of CA7 L6 : 962500 uV
- [ 5.338374] CPUFREQ of CA7 L7 : 950000 uV
- [ 5.342450] CPUFREQ of CA7 L8 : 950000 uV
- [ 5.346526] CPUFREQ of CA7 L9 : 950000 uV
- [ 5.350581] CPUFREQ of CA7 L10 : 950000 uV
- [ 5.354765] CPUFREQ of CA7 L11 : 950000 uV
- [ 5.359001] CPUFREQ of CA15 L0 : 1362500 uV
- [ 5.363091] CPUFREQ of CA15 L1 : 1362500 uV
- [ 5.367258] CPUFREQ of CA15 L2 : 1250000 uV
- [ 5.371433] CPUFREQ of CA15 L3 : 1200000 uV
- [ 5.375570] CPUFREQ of CA15 L4 : 1162500 uV
- [ 5.379740] CPUFREQ of CA15 L5 : 1137500 uV
- [ 5.383909] CPUFREQ of CA15 L6 : 1100000 uV
- [ 5.388065] CPUFREQ of CA15 L7 : 1062500 uV
- [ 5.392226] CPUFREQ of CA15 L8 : 1025000 uV
- [ 5.396389] CPUFREQ of CA15 L9 : 1000000 uV
- [ 5.400530] CPUFREQ of CA15 L10 : 962500 uV
- [ 5.404714] CPUFREQ of CA15 L11 : 925000 uV
- [ 5.408877] CPUFREQ of CA15 L12 : 900000 uV
- [ 5.413039] CPUFREQ of CA15 L13 : 900000 uV
- [ 5.417207] CPUFREQ of CA15 L14 : 900000 uV
- [ 5.421364] CPUFREQ of CA15 L15 : 900000 uV
- [ 5.425499] CPUFREQ of CA15 L16 : 900000 uV
- [ 5.429714] CPUFREQ of CA15 L17 : 900000 uV
- [ 5.433857] CPUFREQ of CA15 L18 : 900000 uV
- [ 5.438099] fout_apll[900000000]
- [ 5.443472] S divider change for DFS of MIF block
- [ 5.546417] init_volt[1000000], freq[800000]
- [ 5.549867] ALSA device list:
- [ 5.552182] #0: Odroid-max98090
- [ 5.556649] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
- [ 5.611623] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
- [ 5.673553] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 5.680205] VFS: Mounted root (ext4 filesystem) on device 179:2.
- [ 5.686842] devtmpfs: mounted
- [ 5.689225] Freeing init memory: 236K
- [ 5.692762] Write protecting the kernel text section c0008000 - c0935000
- [ 5.699734] rodata_test: attempting to write to read-only section:
- [ 5.705593] write to read-only section trapped, success
- [ 5.991393] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
- [ 6.004109] systemd[1]: Set hostname to <odroid>.
- [ 6.132500] systemd[1]: [/etc/systemd/system/wlanap.service:1] Unknown section 'unit'. Ignoring.
- [ 6.139854] systemd[1]: [/etc/systemd/system/wlanap.service:2] Assignment outside of section. Ignoring.
- [ 6.149234] systemd[1]: [/etc/systemd/system/wlanap.service:3] Assignment outside of section. Ignoring.
- [ 6.190639] systemd[1]: Expecting device dev-ttySAC2.device...
- [ 6.206409] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- [ 6.212821] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 6.220203] systemd[1]: Starting Remote File Systems.
- [ 6.236308] systemd[1]: Reached target Remote File Systems.
- [ 6.240430] systemd[1]: Starting Syslog Socket.
- [ 6.256352] systemd[1]: Listening on Syslog Socket.
- [ 6.259784] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
- [ 6.281359] systemd[1]: Starting LVM2 metadata daemon socket.
- [ 6.301302] systemd[1]: Listening on LVM2 metadata daemon socket.
- [ 6.305944] systemd[1]: Starting Delayed Shutdown Socket.
- [ 6.326389] systemd[1]: Listening on Delayed Shutdown Socket.
- [ 6.330684] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- [ 6.351356] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 6.356898] systemd[1]: Starting Device-mapper event daemon FIFOs.
- [ 6.376305] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ 6.381411] systemd[1]: Starting Encrypted Volumes.
- [ 6.396351] systemd[1]: Reached target Encrypted Volumes.
- [ 6.400390] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
- [ 6.426393] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 6.434384] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
- [ 6.442492] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 6.450232] systemd[1]: Starting Paths.
- [ 6.466348] systemd[1]: Reached target Paths.
- [ 6.469257] systemd[1]: Starting Journal Socket.
- [ 6.486349] systemd[1]: Listening on Journal Socket.
- [ 6.491599] systemd[1]: Started Load Kernel Modules.
- [ 6.495147] systemd[1]: Mounting Debug File System...
- [ 6.571568] systemd[1]: Mounted Huge Pages File System.
- [ 6.575468] systemd[1]: Mounting POSIX Message Queue File System...
- [ 6.632676] systemd[1]: Started Set Up Additional Binary Formats.
- [ 6.637391] systemd[1]: Mounted Configuration File System.
- [ 6.643812] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 6.711729] systemd[1]: Mounting FUSE Control File System...
- [ 6.761657] systemd[1]: Starting Journal Service...
- [ 6.816489] systemd[1]: Started Journal Service.
- [ 6.832337] systemd-journald[126]: Vacuuming done, freed 0 bytes
- [ 7.998682] systemd-udevd[147]: starting version 208
- [ 8.116147] S5P ACE Driver, (c) 2010 Samsung Electronics
- [ 8.121345] ACE: ecb-aes-s5p-ace
- [ 8.123933] ACE: cbc-aes-s5p-ace
- [ 8.128236] ACE: ctr-aes-s5p-ace
- [ 8.139801] ACE: sha1-s5p-ace
- [ 8.141635] ACE: sha256-s5p-ace
- [ 8.144416] ACE driver is initialized
- [ 8.182132] s5p-mipi-csis.2
- [ 8.182137] : s5pcsis_subdev_close
- [ 8.184303] s5p-mipi-csis.1
- [ 8.184308] : s5pcsis_subdev_close
- [ 8.191637] [INFO]flite_subdev_close:605:
- [ 8.204604] [INFO]flite_subdev_close:605:
- [ 8.209908] s5p-mipi-csis.0
- [ 8.209913] : s5pcsis_subdev_close
- [ 8.212165] [INFO]flite_subdev_close:605:
- [ 8.213309] [ERROR]gsc_capture_open:705: gsc pipeline initialization failed
- [ 8.213642] [ERROR]gsc_capture_open:705: gsc pipeline initialization failed
- [ 8.236298] [INFO]flite_pipeline_prepare:700: me->name : exynos-fimc-lite.0
- [ 8.243328] [INFO]flite_pipeline_prepare:720: flite->pipeline.flite : 0x (null)
- [ 8.249858] [INFO]flite_pipeline_prepare:721: flite->pipeline.sensor : 0x (null)
- [ 8.257309] [INFO]flite_pipeline_prepare:722: flite->pipeline.csis : 0x (null)
- [ 8.264597] [INFO]flite_pipeline_prepare:700: me->name : exynos-fimc-lite.2
- [ 8.271524] [INFO]flite_pipeline_prepare:720: flite->pipeline.flite : 0x (null)
- [ 8.272613] [ERROR]flite_open:891: flite pipeline initialization failed
- [ 8.286962] [INFO]flite_pipeline_prepare:721: flite->pipeline.sensor : 0x (null)
- [ 8.294424] [INFO]flite_pipeline_prepare:722: flite->pipeline.csis : 0x (null)
- [ 8.301708] [ERROR]flite_open:891: flite pipeline initialization failed
- [ 8.301741] [ERROR]gsc_capture_open:705: gsc pipeline initialization failed
- [ 8.302518] [INFO]flite_pipeline_prepare:700: me->name : exynos-fimc-lite.1
- [ 8.302529] [INFO]flite_pipeline_prepare:720: flite->pipeline.flite : 0x (null)
- [ 8.302539] [INFO]flite_pipeline_prepare:721: flite->pipeline.sensor : 0x (null)
- [ 8.302549] [INFO]flite_pipeline_prepare:722: flite->pipeline.csis : 0x (null)
- [ 8.302574] [ERROR]flite_open:891: flite pipeline initialization failed
- [ 8.302603] [ERROR]gsc_capture_open:705: gsc pipeline initialization failed
- [ 8.405573] smsc95xx v1.0.4
- [ 8.409934] [smsc95xx_read_mac_addr] Mac address = 06:C5:12:XX:XX:XX
- [ 8.468446] smsc95xx 1-2:1.0: eth0: register 'smsc95xx' at usb-s5p-ehci-2, smsc95xx USB 2.0 Ethernet, 06:c5:12:XX:XX:XX
- [ 8.484297] usbcore: registered new interface driver smsc95xx
- [ 8.578723] systemd-journald[126]: Received request to flush runtime journal from PID 1
- [ 8.629471] usbcore: registered new interface driver rtl8192cu
- [ 8.648705] MFC v6.5, F/W: 13yy, 03mm, 04dd (D)
- [ 9.235894] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 9.846375] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 10.025280] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 10.705586] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 10.712015] smsc95xx 1-2:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
- [ 11.193001] touch_input_open
- [ 11.746357] s5p-mipi-dsim s5p-mipi-dsim.1: DSI Master driver has been completed.
- [ 11.746368] s5p-mipi-dsim s5p-mipi-dsim.1: DSI Master state is stop state
- [ 13.053008] max98090 1-0010: No audio clocks configured
- [ 13.226491] touch_input_close
- [ 14.634935] touch_input_open
- [ 15.091304] s5p-mipi-dsim s5p-mipi-dsim.1: DSI Master driver has been completed.
- [ 15.091312] s5p-mipi-dsim s5p-mipi-dsim.1: DSI Master state is stop state
- [ 20.196269] wlan0: no IPv6 routers present
- [ 21.646270] eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement