Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- sefsinalas@sefsinalas-laptop:~$ dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.31-16-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 (Ubuntu 2.6.31-16.53-generic)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
- [ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000007f6df000 - 0000000080000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] DMI present.
- [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0x7f6d0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-D7FFF write-protect
- [ 0.000000] D8000-DFFFF uncachable
- [ 0.000000] E0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
- [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] Scanning 0 areas for low memory corruption
- [ 0.000000] modified physical RAM map:
- [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
- [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
- [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] modified: 0000000000100000 - 000000007f6d0000 (usable)
- [ 0.000000] modified: 000000007f6d0000 - 000000007f6df000 (ACPI NVS)
- [ 0.000000] modified: 000000007f6df000 - 0000000080000000 (reserved)
- [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
- [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
- [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
- [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
- [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] initial memory mapped : 0 - 00c00000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] Using x86 segment limits to approximate NX protection
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
- [ 0.000000] RAMDISK: 3781c000 - 37fefb11
- [ 0.000000] Allocated new RAMDISK: 008ad000 - 01080b11
- [ 0.000000] Move RAMDISK from 000000003781c000 - 0000000037fefb10 to 008ad000 - 01080b10
- [ 0.000000] ACPI: RSDP 000f79b0 00024 (v02 PTLTD )
- [ 0.000000] ACPI: XSDT 7f6d3feb 00094 (v01 FICINC FIRST NB 06040000 LTP 00000000)
- [ 0.000000] ACPI: FACP 7f6dbbd2 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
- [ 0.000000] ACPI: DSDT 7f6d55b5 065A9 (v02 INTEL CRESTLNE 06040000 INTL 20050624)
- [ 0.000000] ACPI: FACS 7f6defc0 00040
- [ 0.000000] ACPI: APIC 7f6dbcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
- [ 0.000000] ACPI: HPET 7f6dbd2e 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
- [ 0.000000] ACPI: MCFG 7f6dbd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
- [ 0.000000] ACPI: TCPA 7f6dbda2 00032 (v01 Intel CRESTLN 06040000 00005A52)
- [ 0.000000] ACPI: TMOR 7f6dbdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
- [ 0.000000] ACPI: SLIC 7f6dbdfa 00176 (v01 FICINC FIRST NB 06040000 LOHR 0000005A)
- [ 0.000000] ACPI: APIC 7f6dbf70 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
- [ 0.000000] ACPI: BOOT 7f6dbfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
- [ 0.000000] ACPI: SSDT 7f6d5308 002AD (v01 SataRe SataAhci 00001000 INTL 20050624)
- [ 0.000000] ACPI: SSDT 7f6d528f 00079 (v01 BrtRef DD01BRT 00001000 INTL 20050624)
- [ 0.000000] ACPI: SSDT 7f6d460b 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
- [ 0.000000] ACPI: SSDT 7f6d4565 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
- [ 0.000000] ACPI: SSDT 7f6d407f 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
- [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
- [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 1150MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] node 0 low ram: 00000000 - 377fe000
- [ 0.000000] node 0 bootmap 00011000 - 00017f00
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
- [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
- [ 0.000000] #5 [00008a9000 - 00008ac194] BRK ==> [00008a9000 - 00008ac194]
- [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
- [ 0.000000] #7 [00008ad000 - 0001080b11] NEW RAMDISK ==> [00008ad000 - 0001080b11]
- [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
- [ 0.000000] found SMP MP-table at [c00f7a30] f7a30
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x0007f6d0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x0007f6d0
- [ 0.000000] On node 0 totalpages: 521823
- [ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1081200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 2302 pages used for memmap
- [ 0.000000] HighMem zone: 292308 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
- [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages at c207b000, static data 35612 bytes
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517745
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=85b98e60-8ed0-434e-ae83-4152b26d0bbf ro quiet splash
- [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 10438400 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6d0)
- [ 0.000000] Memory: 2043068k/2087744k available (4566k kernel code, 43356k reserved, 2142k data, 540k init, 1178440k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
- [ 0.000000] .data : 0xc0575bb4 - 0xc078d3c8 (2142 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc0575bb4 (4566 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] NR_IRQS:2304 nr_irqs:424
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1862.013 MHz processor.
- [ 0.001742] Console: colour VGA+ 80x25
- [ 0.001750] console [tty0] enabled
- [ 0.001985] hpet clockevent registered
- [ 0.001993] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.002006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.02 BogoMIPS (lpj=7448052)
- [ 0.002042] Security Framework initialized
- [ 0.002080] AppArmor: AppArmor initialized
- [ 0.002095] Mount-cache hash table entries: 512
- [ 0.002354] Initializing cgroup subsys ns
- [ 0.002363] Initializing cgroup subsys cpuacct
- [ 0.002373] Initializing cgroup subsys memory
- [ 0.002387] Initializing cgroup subsys freezer
- [ 0.002392] Initializing cgroup subsys net_cls
- [ 0.002420] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.002427] CPU: L2 cache: 1024K
- [ 0.002433] CPU: Physical Processor ID: 0
- [ 0.002437] CPU: Processor Core ID: 0
- [ 0.002445] mce: CPU supports 6 MCE banks
- [ 0.002462] CPU0: Thermal monitoring enabled (TM2)
- [ 0.002469] using mwait in idle threads.
- [ 0.002482] Performance Counters: Core2 events, Intel PMU driver.
- [ 0.002502] ... version: 2
- [ 0.002506] ... bit width: 40
- [ 0.002510] ... generic counters: 2
- [ 0.002515] ... value mask: 000000ffffffffff
- [ 0.002519] ... max period: 000000007fffffff
- [ 0.002524] ... fixed-purpose counters: 3
- [ 0.002528] ... counter mask: 0000000700000003
- [ 0.002536] Checking 'hlt' instruction... OK.
- [ 0.020011] ACPI: Core revision 20090521
- [ 0.044609] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.087738] CPU0: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
- [ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.004000] Initializing CPU#1
- [ 0.004000] Calibrating delay using timer specific routine.. 3724.01 BogoMIPS (lpj=7448035)
- [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.004000] CPU: L2 cache: 1024K
- [ 0.004000] CPU: Physical Processor ID: 0
- [ 0.004000] CPU: Processor Core ID: 1
- [ 0.004000] mce: CPU supports 6 MCE banks
- [ 0.004000] CPU1: Thermal monitoring enabled (TM2)
- [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
- [ 0.174502] CPU1: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
- [ 0.174534] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.176036] Brought up 2 CPUs
- [ 0.176042] Total of 2 processors activated (7448.04 BogoMIPS).
- [ 0.176118] CPU0 attaching sched-domain:
- [ 0.176124] domain 0: span 0-1 level MC
- [ 0.176131] groups: 0 1
- [ 0.176144] CPU1 attaching sched-domain:
- [ 0.176149] domain 0: span 0-1 level MC
- [ 0.176156] groups: 1 0
- [ 0.176317] Booting paravirtualized kernel on bare hardware
- [ 0.176510] regulator: core version 0.5
- [ 0.176510] Time: 0:05:05 Date: 02/16/10
- [ 0.176510] NET: Registered protocol family 16
- [ 0.180242] EISA bus registered
- [ 0.180263] ACPI: bus type pci registered
- [ 0.180420] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.180427] PCI: MCFG area at e0000000 reserved in E820
- [ 0.180431] PCI: Using MMCONFIG for extended config space
- [ 0.180436] PCI: Using configuration type 1 for base access
- [ 0.182969] bio: create slab <bio-0> at 0
- [ 0.185600] ACPI: EC: Look up EC in DSDT
- [ 0.192998] ACPI: BIOS _OSI(Linux) query ignored
- [ 0.196743] ACPI: Interpreter enabled
- [ 0.196761] ACPI: (supports S0 S3 S4 S5)
- [ 0.196812] ACPI: Using IOAPIC for interrupt routing
- [ 0.209883] ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62
- [ 0.209890] ACPI: EC: driver started in poll mode
- [ 0.210047] ACPI: Power Resource [FN02] (off)
- [ 0.210137] ACPI: Power Resource [FN00] (off)
- [ 0.210226] ACPI: Power Resource [FN01] (off)
- [ 0.210893] ACPI: No dock devices found.
- [ 0.212947] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.213168] pci 0000:00:02.0: reg 10 64bit mmio: [0xf0000000-0xf00fffff]
- [ 0.213187] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
- [ 0.213200] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
- [ 0.213298] pci 0000:00:02.1: reg 10 64bit mmio: [0xf0100000-0xf01fffff]
- [ 0.213629] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
- [ 0.213834] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
- [ 0.214055] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0504800-0xf0504bff]
- [ 0.214253] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- [ 0.214268] pci 0000:00:1a.7: PME# disabled
- [ 0.214438] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0300000-0xf0303fff]
- [ 0.214633] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.214647] pci 0000:00:1b.0: PME# disabled
- [ 0.214833] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
- [ 0.215035] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
- [ 0.215237] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
- [ 0.215455] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0504c00-0xf0504fff]
- [ 0.215656] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.215670] pci 0000:00:1d.7: PME# disabled
- [ 0.216169] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
- [ 0.216180] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
- [ 0.216191] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
- [ 0.216203] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0068 (mask 0007)
- [ 0.216366] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
- [ 0.216391] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
- [ 0.216415] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
- [ 0.216439] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
- [ 0.216463] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
- [ 0.216694] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07]
- [ 0.216718] pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7]
- [ 0.216742] pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df]
- [ 0.216766] pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3]
- [ 0.216790] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
- [ 0.216815] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0504000-0xf05047ff]
- [ 0.216948] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.216962] pci 0000:00:1f.2: PME# disabled
- [ 0.217061] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
- [ 0.217139] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f]
- [ 0.217388] pci 0000:02:07.0: reg 10 32bit mmio: [0xf0200000-0xf0200fff]
- [ 0.217465] pci 0000:02:07.0: supports D1 D2
- [ 0.217470] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.217485] pci 0000:02:07.0: PME# disabled
- [ 0.217622] pci 0000:00:1e.0: transparent bridge
- [ 0.217646] pci 0000:00:1e.0: bridge 32bit mmio: [0xf0200000-0xf02fffff]
- [ 0.217750] pci_bus 0000:00: on NUMA node 0
- [ 0.217761] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.218479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
- [ 0.239215] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
- [ 0.239460] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 0.239699] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
- [ 0.239935] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 0.240203] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 0.240442] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
- [ 0.240675] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
- [ 0.240911] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 0.241347] SCSI subsystem initialized
- [ 0.241406] libata version 3.00 loaded.
- [ 0.241406] usbcore: registered new interface driver usbfs
- [ 0.241406] usbcore: registered new interface driver hub
- [ 0.241406] usbcore: registered new device driver usb
- [ 0.241406] ACPI: WMI: Mapper loaded
- [ 0.241406] PCI: Using ACPI for IRQ routing
- [ 0.252017] Bluetooth: Core ver 2.15
- [ 0.252052] NET: Registered protocol family 31
- [ 0.252052] Bluetooth: HCI device and connection manager initialized
- [ 0.252052] Bluetooth: HCI socket layer initialized
- [ 0.252052] NetLabel: Initializing
- [ 0.252052] NetLabel: domain hash size = 128
- [ 0.252054] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.252082] NetLabel: unlabeled traffic allowed by default
- [ 0.252159] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.252172] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.272026] pnp: PnP ACPI init
- [ 0.272064] ACPI: bus type pnp registered
- [ 0.276917] pnp: PnP ACPI: found 10 devices
- [ 0.276923] ACPI: ACPI bus type pnp unregistered
- [ 0.276933] PnPBIOS: Disabled by ACPI PNP
- [ 0.276958] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
- [ 0.276966] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
- [ 0.276973] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
- [ 0.276981] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
- [ 0.276988] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
- [ 0.276995] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
- [ 0.277003] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
- [ 0.277010] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
- [ 0.277027] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
- [ 0.277044] system 00:06: ioport range 0x680-0x69f has been reserved
- [ 0.277051] system 00:06: ioport range 0x800-0x80f has been reserved
- [ 0.277059] system 00:06: ioport range 0x1000-0x107f has been reserved
- [ 0.277066] system 00:06: ioport range 0x1180-0x11bf has been reserved
- [ 0.277074] system 00:06: ioport range 0x1640-0x164f has been reserved
- [ 0.277081] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
- [ 0.312020] AppArmor: AppArmor Filesystem Enabled
- [ 0.312129] pci 0000:02:07.0: CardBus bridge, secondary bus 0000:03
- [ 0.312137] pci 0000:02:07.0: IO window: 0x002000-0x0020ff
- [ 0.312152] pci 0000:02:07.0: IO window: 0x002400-0x0024ff
- [ 0.312168] pci 0000:02:07.0: PREFETCH window: 0x80000000-0x83ffffff
- [ 0.312184] pci 0000:02:07.0: MEM window: 0x88000000-0x8bffffff
- [ 0.312200] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
- [ 0.312210] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
- [ 0.312229] pci 0000:00:1e.0: MEM window: 0xf0200000-0xf02fffff
- [ 0.312243] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
- [ 0.312278] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.312307] alloc irq_desc for 17 on node -1
- [ 0.312312] alloc kstat_irqs on node -1
- [ 0.312324] pci 0000:02:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.312342] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.312349] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.312356] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
- [ 0.312362] pci_bus 0000:02: resource 1 mem: [0xf0200000-0xf02fffff]
- [ 0.312369] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x83ffffff]
- [ 0.312375] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
- [ 0.312381] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
- [ 0.312387] pci_bus 0000:03: resource 0 io: [0x2000-0x20ff]
- [ 0.312393] pci_bus 0000:03: resource 1 io: [0x2400-0x24ff]
- [ 0.312399] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
- [ 0.312405] pci_bus 0000:03: resource 3 mem: [0x88000000-0x8bffffff]
- [ 0.312486] NET: Registered protocol family 2
- [ 0.312710] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.313450] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.314331] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.314863] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.314870] TCP reno registered
- [ 0.315089] NET: Registered protocol family 1
- [ 0.315237] Trying to unpack rootfs image as initramfs...
- [ 0.502591] Switched to high resolution mode on CPU 1
- [ 0.504003] Switched to high resolution mode on CPU 0
- [ 0.810356] Freeing initrd memory: 8014k freed
- [ 0.817929] Simple Boot Flag at 0x36 set to 0x1
- [ 0.818347] cpufreq-nforce2: No nForce2 chipset.
- [ 0.818409] Scanning for low memory corruption every 60 seconds
- [ 0.818638] audit: initializing netlink socket (disabled)
- [ 0.818669] type=2000 audit(1266278705.816:1): initialized
- [ 0.839980] highmem bounce pool size: 64 pages
- [ 0.839992] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.843635] VFS: Disk quotas dquot_6.5.2
- [ 0.843785] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.845132] fuse init (API version 7.12)
- [ 0.845334] msgmni has been set to 1706
- [ 0.845812] alg: No test for stdrng (krng)
- [ 0.845846] io scheduler noop registered
- [ 0.845852] io scheduler anticipatory registered
- [ 0.845856] io scheduler deadline registered
- [ 0.845963] io scheduler cfq registered (default)
- [ 0.845988] pci 0000:00:02.0: Boot video device
- [ 0.846434] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.846492] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.847565] ACPI: AC Adapter [ACAD] (off-line)
- [ 0.847744] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
- [ 0.847752] ACPI: Power Button [PWRF]
- [ 0.847878] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
- [ 0.847965] ACPI: Lid Switch [LID]
- [ 0.848106] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
- [ 0.848113] ACPI: Power Button [PWRB]
- [ 0.848414] fan PNP0C0B:00: registered as cooling_device0
- [ 0.848429] ACPI: Fan [FAN2] (off)
- [ 0.848612] fan PNP0C0B:01: registered as cooling_device1
- [ 0.848627] ACPI: Fan [FAN0] (off)
- [ 0.848805] fan PNP0C0B:02: registered as cooling_device2
- [ 0.848822] ACPI: Fan [FAN1] (off)
- [ 0.850214] ACPI: SSDT 7f6d4f4d 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
- [ 0.851427] ACPI: SSDT 7f6d486a 0065E (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
- [ 0.857194] Monitor-Mwait will be used to enter C-1 state
- [ 0.857261] Monitor-Mwait will be used to enter C-2 state
- [ 0.857316] Monitor-Mwait will be used to enter C-3 state
- [ 0.857335] Marking TSC unstable due to TSC halts in idle
- [ 0.857381] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
- [ 0.857432] processor LNXCPU:00: registered as cooling_device3
- [ 0.857443] ACPI: Processor [CPU0] (supports 8 throttling states)
- [ 0.858240] ACPI: SSDT 7f6d51c7 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
- [ 0.859086] ACPI: SSDT 7f6d4ec8 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
- [ 0.861363] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
- [ 0.861425] processor LNXCPU:01: registered as cooling_device4
- [ 0.861441] ACPI: Processor [CPU1] (supports 8 throttling states)
- [ 0.869223] thermal LNXTHERM:01: registered as thermal_zone0
- [ 0.869244] ACPI: Thermal Zone [TZ00] (48 C)
- [ 0.870545] thermal LNXTHERM:02: registered as thermal_zone1
- [ 0.870566] ACPI: Thermal Zone [TZ01] (27 C)
- [ 0.870716] isapnp: Scanning for PnP cards...
- [ 0.916311] ACPI: Battery Slot [BAT0] (battery present)
- [ 1.228790] isapnp: No Plug & Play device found
- [ 1.231671] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.234871] brd: module loaded
- [ 1.235951] loop: module loaded
- [ 1.236123] input: Macintosh mouse button emulation as /devices/virtual/input/input3
- [ 1.236305] ahci 0000:00:1f.2: version 3.0
- [ 1.236340] alloc irq_desc for 19 on node -1
- [ 1.236345] alloc kstat_irqs on node -1
- [ 1.236360] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.236452] alloc irq_desc for 24 on node -1
- [ 1.236456] alloc kstat_irqs on node -1
- [ 1.236484] ahci 0000:00:1f.2: irq 24 for MSI/MSI-X
- [ 1.236626] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
- [ 1.236635] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
- [ 1.236650] ahci 0000:00:1f.2: setting latency timer to 64
- [ 1.237124] scsi0 : ahci
- [ 1.237336] scsi1 : ahci
- [ 1.237475] scsi2 : ahci
- [ 1.237743] ata1: SATA max UDMA/133 abar m2048@0xf0504000 port 0xf0504100 irq 24
- [ 1.237753] ata2: SATA max UDMA/133 abar m2048@0xf0504000 port 0xf0504180 irq 24
- [ 1.237763] ata3: SATA max UDMA/133 abar m2048@0xf0504000 port 0xf0504200 irq 24
- [ 1.237880] ata_piix 0000:00:1f.1: version 2.13
- [ 1.237908] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 1.237997] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 1.238152] scsi3 : ata_piix
- [ 1.238292] scsi4 : ata_piix
- [ 1.239685] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
- [ 1.239693] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
- [ 1.241820] Fixed MDIO Bus: probed
- [ 1.241902] PPP generic driver version 2.4.2
- [ 1.242129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.242180] alloc irq_desc for 18 on node -1
- [ 1.242185] alloc kstat_irqs on node -1
- [ 1.242198] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 1.242233] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 1.242242] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 1.242350] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 1.246327] ehci_hcd 0000:00:1a.7: debug port 1
- [ 1.246347] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
- [ 1.246380] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0504800
- [ 1.261036] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 1.261200] usb usb1: configuration #1 chosen from 1 choice
- [ 1.261269] hub 1-0:1.0: USB hub found
- [ 1.261287] hub 1-0:1.0: 4 ports detected
- [ 1.261421] alloc irq_desc for 23 on node -1
- [ 1.261426] alloc kstat_irqs on node -1
- [ 1.261437] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1.261463] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 1.261473] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 1.261553] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 1.265522] ehci_hcd 0000:00:1d.7: debug port 1
- [ 1.265541] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 1.265573] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0504c00
- [ 1.280051] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 1.280199] usb usb2: configuration #1 chosen from 1 choice
- [ 1.280264] hub 2-0:1.0: USB hub found
- [ 1.280279] hub 2-0:1.0: 6 ports detected
- [ 1.280432] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.280472] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.280533] alloc irq_desc for 16 on node -1
- [ 1.280538] alloc kstat_irqs on node -1
- [ 1.280548] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.280566] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 1.280576] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 1.280658] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 1.280734] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
- [ 1.280915] usb usb3: configuration #1 chosen from 1 choice
- [ 1.280979] hub 3-0:1.0: USB hub found
- [ 1.280995] hub 3-0:1.0: 2 ports detected
- [ 1.281142] alloc irq_desc for 21 on node -1
- [ 1.281147] alloc kstat_irqs on node -1
- [ 1.281159] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 1.281177] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 1.281186] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 1.281258] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 1.281331] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
- [ 1.281512] usb usb4: configuration #1 chosen from 1 choice
- [ 1.281581] hub 4-0:1.0: USB hub found
- [ 1.281595] hub 4-0:1.0: 2 ports detected
- [ 1.281713] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1.281730] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 1.281740] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 1.281811] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
- [ 1.281867] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
- [ 1.282055] usb usb5: configuration #1 chosen from 1 choice
- [ 1.282123] hub 5-0:1.0: USB hub found
- [ 1.282137] hub 5-0:1.0: 2 ports detected
- [ 1.282249] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.282266] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 1.282276] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 1.282346] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
- [ 1.282416] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
- [ 1.282605] usb usb6: configuration #1 chosen from 1 choice
- [ 1.282669] hub 6-0:1.0: USB hub found
- [ 1.282684] hub 6-0:1.0: 2 ports detected
- [ 1.282793] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 1.282811] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 1.282820] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 1.282891] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
- [ 1.282943] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
- [ 1.283131] usb usb7: configuration #1 chosen from 1 choice
- [ 1.283195] hub 7-0:1.0: USB hub found
- [ 1.283210] hub 7-0:1.0: 2 ports detected
- [ 1.283449] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 1.303774] i8042.c: Detected active multiplexing controller, rev 1.1.
- [ 1.304485] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.304498] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 1.304508] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 1.304515] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 1.304522] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 1.304684] mice: PS/2 mouse device common for all mice
- [ 1.304972] rtc_cmos 00:07: RTC can wake from S4
- [ 1.305052] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
- [ 1.305110] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 1.305378] device-mapper: uevent: version 1.0.3
- [ 1.305605] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- [ 1.305809] device-mapper: multipath: version 1.1.0 loaded
- [ 1.305815] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 1.306101] EISA: Probing bus 0 at eisa.0
- [ 1.306114] Cannot allocate resource for EISA slot 1
- [ 1.306120] Cannot allocate resource for EISA slot 2
- [ 1.306175] EISA: Detected 0 cards.
- [ 1.306589] cpuidle: using governor ladder
- [ 1.306884] cpuidle: using governor menu
- [ 1.308125] TCP cubic registered
- [ 1.308499] NET: Registered protocol family 10
- [ 1.309609] lo: Disabled Privacy Extensions
- [ 1.310456] NET: Registered protocol family 17
- [ 1.310503] Bluetooth: L2CAP ver 2.13
- [ 1.310508] Bluetooth: L2CAP socket layer initialized
- [ 1.310514] Bluetooth: SCO (Voice Link) ver 0.6
- [ 1.310518] Bluetooth: SCO socket layer initialized
- [ 1.310614] Bluetooth: RFCOMM TTY layer initialized
- [ 1.310622] Bluetooth: RFCOMM socket layer initialized
- [ 1.310626] Bluetooth: RFCOMM ver 1.11
- [ 1.311785] Using IPI No-Shortcut mode
- [ 1.311857] PM: Resume from disk failed.
- [ 1.311871] registered taskstats version 1
- [ 1.311985] Magic number: 14:684:51
- [ 1.312137] rtc_cmos 00:07: setting system clock to 2010-02-16 00:05:06 UTC (1266278706)
- [ 1.312141] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.312143] EDD information not available.
- [ 1.343939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 1.409995] ata4.00: ATAPI: Optiarc DVD RW AD-7580A, ZX08, max UDMA/33
- [ 1.424341] ata4.00: configured for UDMA/33
- [ 1.500055] Clocksource tsc unstable (delta = -159083089 ns)
- [ 1.556085] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.556111] ata2: SATA link down (SStatus 0 SControl 300)
- [ 1.556142] ata3: SATA link down (SStatus 0 SControl 300)
- [ 1.565703] ACPI Warning: \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-940
- [ 1.565712] ata1.00: _GTF unexpected object type 0x1
- [ 1.572054] usb 1-2: new high speed USB device using ehci_hcd and address 2
- [ 1.575260] ata1.00: HPA unlocked: 488395055 -> 488397168, native 488397168
- [ 1.575265] ata1.00: ATA-8: SAMSUNG HM250HI, 2AC101C4, max UDMA/133
- [ 1.575268] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 1.584930] ata1.00: _GTF unexpected object type 0x1
- [ 1.585035] ata1.00: configured for UDMA/133
- [ 1.600182] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM250HI 2AC1 PQ: 0 ANSI: 5
- [ 1.600323] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.600363] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 1.600412] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.600415] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.600439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.600575] sda:
- [ 1.601757] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7580A ZX08 PQ: 0 ANSI: 5
- [ 1.607080] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.607084] Uniform CD-ROM driver Revision: 3.20
- [ 1.607179] sr 3:0:0:0: Attached scsi CD-ROM sr0
- [ 1.607229] sr 3:0:0:0: Attached scsi generic sg1 type 5
- [ 1.623346] sda1 sda2 sda3 sda4 < sda5 sda6 >
- [ 1.692838] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.692904] Freeing unused kernel memory: 540k freed
- [ 1.693317] Write protecting the kernel text: 4568k
- [ 1.693378] Write protecting the kernel read-only data: 1836k
- [ 1.824648] Linux agpgart interface v0.103
- [ 1.842828] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
- [ 1.843231] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
- [ 1.847093] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
- [ 1.898781] usb 1-2: configuration #1 chosen from 1 choice
- [ 1.911273] [drm] Initialized drm 1.1.0 20060810
- [ 1.940860] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.940867] i915 0000:00:02.0: setting latency timer to 64
- [ 1.943654] alloc irq_desc for 25 on node -1
- [ 1.943658] alloc kstat_irqs on node -1
- [ 1.943671] i915 0000:00:02.0: irq 25 for MSI/MSI-X
- [ 2.161786] usb 1-3: new high speed USB device using ehci_hcd and address 3
- [ 2.352796] usb 1-3: configuration #1 chosen from 1 choice
- [ 2.453727] [drm] TV-14: set mode NTSC 480i 0
- [ 2.580630] [drm] fb0: inteldrmfb frame buffer device
- [ 2.582844] acpi device:06: registered as cooling_device5
- [ 2.583081] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input5
- [ 2.583116] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 2.583147] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 2.651922] [drm] LVDS-8: set mode 1280x800 17
- [ 2.843057] Console: switching to colour frame buffer device 160x50
- [ 3.079334] xor: automatically using best checksumming function: pIII_sse
- [ 3.097015] pIII_sse : 6824.000 MB/sec
- [ 3.097018] xor: using function: pIII_sse (6824.000 MB/sec)
- [ 3.099557] device-mapper: dm-raid45: initialized v0.2594b
- [ 3.364743] PM: Starting manual resume from disk
- [ 3.364748] PM: Resume from partition 8:3
- [ 3.364750] PM: Checking hibernation image.
- [ 3.364924] PM: Resume from disk failed.
- [ 3.396892] EXT4-fs (sda1): barriers enabled
- [ 3.406645] kjournald2 starting: pid 403, dev sda1:8, commit interval 5 seconds
- [ 3.406676] EXT4-fs (sda1): delayed allocation enabled
- [ 3.406680] EXT4-fs: file extents enabled
- [ 3.407301] EXT4-fs: mballoc enabled
- [ 3.407317] EXT4-fs (sda1): mounted filesystem with ordered data mode
- [ 11.837091] udev: starting version 147
- [ 11.859501] Adding 971924k swap on /dev/sda3. Priority:-1 extents:1 across:971924k
- [ 12.026212] yenta_cardbus 0000:02:07.0: CardBus bridge found [1509:2f02]
- [ 12.026263] yenta_cardbus 0000:02:07.0: Using CSCINT to route CSC interrupts to PCI
- [ 12.026266] yenta_cardbus 0000:02:07.0: Routing CardBus interrupts to PCI
- [ 12.026276] yenta_cardbus 0000:02:07.0: TI: mfunc 0x01021002, devctl 0x44
- [ 12.051298] lp: driver loaded but no devices found
- [ 12.082714] Linux video capture interface: v2.00
- [ 12.085968] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0240)
- [ 12.091640] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 12.114700] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input6
- [ 12.114762] usbcore: registered new interface driver uvcvideo
- [ 12.114766] USB Video Class driver (v0.1.0)
- [ 12.169205] cfg80211: Calling CRDA to update world regulatory domain
- [ 12.188803] alloc irq_desc for 22 on node -1
- [ 12.188807] alloc kstat_irqs on node -1
- [ 12.188816] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 12.188873] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 12.213032] cfg80211: World regulatory domain updated:
- [ 12.213036] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 12.213039] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 12.213042] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 12.213045] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 12.213048] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 12.213050] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 12.257826] yenta_cardbus 0000:02:07.0: ISA IRQ mask 0x0cf8, PCI irq 17
- [ 12.257834] yenta_cardbus 0000:02:07.0: Socket status: 30000006
- [ 12.257839] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
- [ 12.257852] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
- [ 12.257857] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
- [ 12.258113] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff
- [ 12.258117] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
- [ 12.264829] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
- [ 12.264921] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
- [ 12.387671] EXT4-fs (sda1): internal journal on sda1:8
- [ 12.487129] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input8
- [ 12.510043] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9
- [ 12.572278] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
- [ 12.574459] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
- [ 12.575380] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
- [ 12.576149] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
- [ 12.577126] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
- [ 12.594605] phy0: Selected rate control algorithm 'minstrel'
- [ 12.595337] phy0: hwaddr 00:25:d3:2a:7a:4c, RTL8187BvE V0 + rtl8225z2
- [ 12.620458] rtl8187: Customer ID is 0x00
- [ 12.620510] Registered led device: rtl8187-phy0::tx
- [ 12.620535] Registered led device: rtl8187-phy0::rx
- [ 12.620560] usbcore: registered new interface driver rtl8187
- [ 12.821073] EXT4-fs (sda2): barriers enabled
- [ 12.843610] kjournald2 starting: pid 832, dev sda2:8, commit interval 5 seconds
- [ 12.865429] EXT4-fs (sda2): internal journal on sda2:8
- [ 12.865434] EXT4-fs (sda2): delayed allocation enabled
- [ 12.865437] EXT4-fs: file extents enabled
- [ 12.875500] EXT4-fs: mballoc enabled
- [ 12.875523] EXT4-fs (sda2): mounted filesystem with ordered data mode
- [ 13.137067] EXT4-fs (sda5): barriers enabled
- [ 13.228029] kjournald2 starting: pid 1033, dev sda5:8, commit interval 5 seconds
- [ 13.251450] EXT4-fs (sda5): internal journal on sda5:8
- [ 13.251457] EXT4-fs (sda5): delayed allocation enabled
- [ 13.251461] EXT4-fs: file extents enabled
- [ 13.261757] EXT4-fs: mballoc enabled
- [ 13.261777] EXT4-fs (sda5): mounted filesystem with ordered data mode
- [ 13.565283] [drm] TV-14: set mode NTSC 480i 0
- [ 13.706366] [drm] TV-14: set mode NTSC 480i 0
- [ 13.967092] [drm] TV-14: set mode NTSC 480i 0
- [ 14.110043] [drm] TV-14: set mode NTSC 480i 0
- [ 17.374531] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 17.707740] ppdev: user-space parallel port driver
- [ 21.059215] [drm] TV-14: set mode NTSC 480i 0
- [ 21.199233] [drm] TV-14: set mode NTSC 480i 0
- [ 21.548220] [drm] TV-14: set mode NTSC 480i 0
- [ 21.688575] [drm] TV-14: set mode NTSC 480i 0
- [ 1228.966207] PM: Syncing filesystems ... done.
- [ 1228.970587] PM: Preparing system for mem sleep
- [ 1228.970592] Freezing user space processes ... (elapsed 0.00 seconds) done.
- [ 1228.971297] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
- [ 1228.971357] PM: Entering mem sleep
- [ 1228.971374] Suspending console(s) (use no_console_suspend to debug)
- [ 1229.176057] usb 1-3: reset high speed USB device using ehci_hcd and address 3
- [ 1229.340055] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ 1229.340155] sd 0:0:0:0: [sda] Stopping disk
- [ 1231.009658] ACPI handle has no context!
- [ 1231.072214] ata_piix 0000:00:1f.1: PCI INT A disabled
- [ 1231.072226] ehci_hcd 0000:00:1d.7: PCI INT A disabled
- [ 1231.072234] uhci_hcd 0000:00:1d.2: PCI INT C disabled
- [ 1231.072243] uhci_hcd 0000:00:1d.1: PCI INT B disabled
- [ 1231.072251] uhci_hcd 0000:00:1d.0: PCI INT A disabled
- [ 1231.176168] HDA Intel 0000:00:1b.0: PCI INT A disabled
- [ 1231.192086] ehci_hcd 0000:00:1a.7: PCI INT C disabled
- [ 1231.192101] uhci_hcd 0000:00:1a.1: PCI INT B disabled
- [ 1231.192116] uhci_hcd 0000:00:1a.0: PCI INT A disabled
- [ 1231.301383] PM: suspend devices took 2.332 seconds
- [ 1231.301976] ehci_hcd 0000:00:1d.7: PME# disabled
- [ 1231.316357] ehci_hcd 0000:00:1a.7: PME# disabled
- [ 1231.332380] ACPI: Preparing to enter system sleep state S3
- [ 1231.340956] Disabling non-boot CPUs ...
- [ 1231.444028] CPU 1 is now offline
- [ 1231.444032] SMP alternatives: switching to UP code
- [ 1231.450574] CPU0 attaching NULL sched-domain.
- [ 1231.450577] CPU1 attaching NULL sched-domain.
- [ 1231.450584] CPU0 attaching NULL sched-domain.
- [ 1231.450799] CPU1 is down
- [ 1231.450851] Extended CMOS year: 2000
- [ 1231.450851] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 1231.450851] Back to C!
- [ 1231.450851] CPU0: Thermal LVT vector (0xfa) already installed
- [ 1231.450851] Extended CMOS year: 2000
- [ 1231.450851] Enabling non-boot CPUs ...
- [ 1231.450851] SMP alternatives: switching to SMP code
- [ 1231.457396] Booting processor 1 APIC 0x1 ip 0x6000
- [ 1231.450408] Initializing CPU#1
- [ 1231.450408] Calibrating delay using timer specific routine.. 3724.11 BogoMIPS (lpj=7448224)
- [ 1231.450408] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 1231.450408] CPU: L2 cache: 1024K
- [ 1231.450408] CPU: Physical Processor ID: 0
- [ 1231.450408] CPU: Processor Core ID: 1
- [ 1231.450408] mce: CPU supports 6 MCE banks
- [ 1231.450408] CPU1: Thermal monitoring enabled (TM2)
- [ 1231.450408] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
- [ 1231.549543] CPU1: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
- [ 1231.549627] CPU0 attaching NULL sched-domain.
- [ 1231.552033] Switched to high resolution mode on CPU 1
- [ 1231.564026] CPU0 attaching sched-domain:
- [ 1231.564029] domain 0: span 0-1 level MC
- [ 1231.564031] groups: 0 1
- [ 1231.564036] CPU1 attaching sched-domain:
- [ 1231.564038] domain 0: span 0-1 level MC
- [ 1231.564040] groups: 1 0
- [ 1231.565030] CPU1 is up
- [ 1231.565033] ACPI: Waking up from system sleep state S3
- [ 1231.568272] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
- [ 1231.568288] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
- [ 1231.568323] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
- [ 1231.568393] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
- [ 1231.568469] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
- [ 1231.568570] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
- [ 1231.568612] ehci_hcd 0000:00:1a.7: PME# disabled
- [ 1231.568704] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
- [ 1231.568718] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
- [ 1231.568821] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
- [ 1231.568898] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
- [ 1231.568974] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
- [ 1231.569073] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
- [ 1231.569115] ehci_hcd 0000:00:1d.7: PME# disabled
- [ 1231.569161] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x83f18001)
- [ 1231.569171] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
- [ 1231.569181] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22802020)
- [ 1231.569191] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x30200, writing 0x60200)
- [ 1231.569216] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107)
- [ 1231.569318] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107)
- [ 1231.569353] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
- [ 1231.569458] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
- [ 1231.569513] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
- [ 1231.569635] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x84000000)
- [ 1231.569686] yenta_cardbus 0000:02:07.0: restoring config space at offset 0xf (was 0x44001ff, writing 0x5c0010a)
- [ 1231.569696] yenta_cardbus 0000:02:07.0: restoring config space at offset 0xe (was 0x0, writing 0x24fc)
- [ 1231.569706] yenta_cardbus 0000:02:07.0: restoring config space at offset 0xd (was 0x0, writing 0x2400)
- [ 1231.569717] yenta_cardbus 0000:02:07.0: restoring config space at offset 0xc (was 0x0, writing 0x20fc)
- [ 1231.569727] yenta_cardbus 0000:02:07.0: restoring config space at offset 0xb (was 0x0, writing 0x2000)
- [ 1231.569738] yenta_cardbus 0000:02:07.0: restoring config space at offset 0xa (was 0x0, writing 0x8bfff000)
- [ 1231.569748] yenta_cardbus 0000:02:07.0: restoring config space at offset 0x9 (was 0x0, writing 0x88000000)
- [ 1231.569759] yenta_cardbus 0000:02:07.0: restoring config space at offset 0x8 (was 0x0, writing 0x83fff000)
- [ 1231.569767] yenta_cardbus 0000:02:07.0: restoring config space at offset 0x7 (was 0x0, writing 0x80000000)
- [ 1231.569777] yenta_cardbus 0000:02:07.0: restoring config space at offset 0x6 (was 0x40000000, writing 0xb0060302)
- [ 1231.569789] yenta_cardbus 0000:02:07.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0200000)
- [ 1231.569799] yenta_cardbus 0000:02:07.0: restoring config space at offset 0x3 (was 0x24000, writing 0x2a808)
- [ 1231.726875] i915 0000:00:02.0: setting latency timer to 64
- [ 1231.787794] [drm] LVDS-8: set mode 1280x800 17
- [ 1231.807889] pci 0000:00:02.1: PME# disabled
- [ 1231.807904] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1231.807918] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 1231.807957] usb usb3: root hub lost power or was reset
- [ 1231.807985] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 1231.808020] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 1231.808059] usb usb4: root hub lost power or was reset
- [ 1231.808089] ehci_hcd 0000:00:1a.7: PME# disabled
- [ 1231.808096] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 1231.808109] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 1231.808127] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 1231.808140] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 1231.897880] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1231.897893] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 1231.897931] usb usb5: root hub lost power or was reset
- [ 1231.897963] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1231.897975] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 1231.898010] usb usb6: root hub lost power or was reset
- [ 1231.898043] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 1231.898054] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 1231.898093] usb usb7: root hub lost power or was reset
- [ 1231.898128] ehci_hcd 0000:00:1d.7: PME# disabled
- [ 1231.898135] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1231.898147] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 1231.898195] pci 0000:00:1e.0: setting latency timer to 64
- [ 1231.898219] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 1231.898228] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 1231.898256] ahci 0000:00:1f.2: setting latency timer to 64
- [ 1232.067918] sd 0:0:0:0: [sda] Starting disk
- [ 1232.216078] ata2: SATA link down (SStatus 0 SControl 300)
- [ 1232.216108] ata3: SATA link down (SStatus 0 SControl 300)
- [ 1232.716690] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
- [ 1232.716693] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
- [ 1232.812334] ata4.00: configured for UDMA/33
- [ 1234.008076] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1234.017703] ata1.00: _GTF unexpected object type 0x1
- [ 1234.036992] ata1.00: _GTF unexpected object type 0x1
- [ 1234.037098] ata1.00: configured for UDMA/133
- [ 1234.052073] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
- [ 1234.052076] ata1: irq_stat 0x00400040, connection status changed
- [ 1234.071236] ata1.00: configured for UDMA/133
- [ 1234.071239] ata1: EH complete
- [ 1234.440984] phy1: Selected rate control algorithm 'minstrel'
- [ 1234.441704] phy1: hwaddr 00:25:d3:2a:7a:4c, RTL8187BvE V0 + rtl8225z2
- [ 1234.463261] rtl8187: Customer ID is 0x00
- [ 1234.463290] Registered led device: rtl8187-phy1::tx
- [ 1234.463309] Registered led device: rtl8187-phy1::rx
- [ 1234.463504] PM: resume devices took 2.752 seconds
- [ 1234.463535] PM: Finishing wakeup.
- [ 1234.463537] Restarting tasks ... done.
- [ 1238.410901] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement