pastebin - collaborative debugging

pastebin is a collaborative debugging tool allowing you to share and modify code snippets while chatting on IRC, IM or a message board.

This site is developed to XHTML and CSS2 W3C standards. If you see this paragraph, your browser does not support those standards and you need to upgrade. Visit WaSP for a variety of options.

pastebin - collaborative debugging tool View Help


Posted by spry on Fri 31 Oct 11:56
report abuse | download | new post

  1. Copyright (c) 1992-2008 The FreeBSD Project.
  2. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  3.         The Regents of the University of California. All rights reserved.
  4. FreeBSD is a registered trademark of The FreeBSD Foundation.
  5. FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
  6.     root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
  7. Timecounter "i8254" frequency 1193182 Hz quality 0
  8. CPU: Intel(R) Xeon(R) CPU           X5460  @ 3.16GHz (3166.68-MHz K8-class CPU)
  9.   Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
  10.   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  11.   Features2=0xce3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>>
  12.   AMD Features=0x20000800<SYSCALL,LM>
  13.   AMD Features2=0x1<LAHF>
  14.   Cores per package: 4
  15. usable memory = 8575406080 (8178 MB)
  16. avail memory  = 8288088064 (7904 MB)
  17. ACPI APIC Table: <HP     ProLiant>
  18. FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
  19.  cpu0 (BSP): APIC ID:  0
  20.  cpu1 (AP): APIC ID:  1
  21.  cpu2 (AP): APIC ID:  2
  22.  cpu3 (AP): APIC ID:  3
  23.  cpu4 (AP): APIC ID:  4
  24.  cpu5 (AP): APIC ID:  5
  25.  cpu6 (AP): APIC ID:  6
  26.  cpu7 (AP): APIC ID:  7
  27. ioapic0 <Version 2.0> irqs 0-23 on motherboard
  28. ioapic1 <Version 2.0> irqs 24-47 on motherboard
  29. kbd1 at kbdmux0
  30. ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
  31. hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
  32. acpi0: <HP ProLiant> on motherboard
  33. acpi0: [ITHREAD]
  34. acpi0: Power Button (fixed)
  35. Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
  36. acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
  37. acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
  38. Timecounter "HPET" frequency 14318180 Hz quality 900
  39. cpu0: <ACPI CPU> on acpi0
  40. ACPI Error (psargs-0459): [CS03] Namespace lookup failure, AE_NOT_FOUND
  41. ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU0._CST] (Node 0xffffff0001279100), AE_NOT_FOUND
  42. est0: <Enhanced SpeedStep Frequency Control> on cpu0
  43. est: CPU supports Enhanced Speedstep, but is not recognized.
  44. est: cpu_vendor GenuineIntel, msr 4921492106004921
  45. device_attach: est0 attach returned 6
  46. p4tcc0: <CPU Frequency Thermal Control> on cpu0
  47. cpu1: <ACPI CPU> on acpi0
  48. est1: <Enhanced SpeedStep Frequency Control> on cpu1
  49. est: CPU supports Enhanced Speedstep, but is not recognized.
  50. est: cpu_vendor GenuineIntel, msr 4921492106004921
  51. device_attach: est1 attach returned 6
  52. p4tcc1: <CPU Frequency Thermal Control> on cpu1
  53. cpu2: <ACPI CPU> on acpi0
  54. est2: <Enhanced SpeedStep Frequency Control> on cpu2
  55. est: CPU supports Enhanced Speedstep, but is not recognized.
  56. est: cpu_vendor GenuineIntel, msr 4921492106004921
  57. device_attach: est2 attach returned 6
  58. p4tcc2: <CPU Frequency Thermal Control> on cpu2
  59. cpu3: <ACPI CPU> on acpi0
  60. est3: <Enhanced SpeedStep Frequency Control> on cpu3
  61. est: CPU supports Enhanced Speedstep, but is not recognized.
  62. est: cpu_vendor GenuineIntel, msr 4921492106004921
  63. device_attach: est3 attach returned 6
  64. p4tcc3: <CPU Frequency Thermal Control> on cpu3
  65. cpu4: <ACPI CPU> on acpi0
  66. est4: <Enhanced SpeedStep Frequency Control> on cpu4
  67. est: CPU supports Enhanced Speedstep, but is not recognized.
  68. est: cpu_vendor GenuineIntel, msr 4921492106004921
  69. device_attach: est4 attach returned 6
  70. p4tcc4: <CPU Frequency Thermal Control> on cpu4
  71. cpu5: <ACPI CPU> on acpi0
  72. est5: <Enhanced SpeedStep Frequency Control> on cpu5
  73. est: CPU supports Enhanced Speedstep, but is not recognized.
  74. est: cpu_vendor GenuineIntel, msr 4921492106004921
  75. device_attach: est5 attach returned 6
  76. p4tcc5: <CPU Frequency Thermal Control> on cpu5
  77. cpu6: <ACPI CPU> on acpi0
  78. est6: <Enhanced SpeedStep Frequency Control> on cpu6
  79. est: CPU supports Enhanced Speedstep, but is not recognized.
  80. est: cpu_vendor GenuineIntel, msr 4921492106004921
  81. device_attach: est6 attach returned 6
  82. p4tcc6: <CPU Frequency Thermal Control> on cpu6
  83. cpu7: <ACPI CPU> on acpi0
  84. est7: <Enhanced SpeedStep Frequency Control> on cpu7
  85. est: CPU supports Enhanced Speedstep, but is not recognized.
  86. est: cpu_vendor GenuineIntel, msr 4921492106004921
  87. device_attach: est7 attach returned 6
  88. p4tcc7: <CPU Frequency Thermal Control> on cpu7
  89. pcib0: <ACPI Host-PCI bridge> on acpi0
  90. pci0: <ACPI PCI bus> on pcib0
  91. pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
  92. pci9: <ACPI PCI bus> on pcib1
  93. pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci9
  94. pci10: <ACPI PCI bus> on pcib2
  95. pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci10
  96. pci11: <ACPI PCI bus> on pcib3
  97. pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci10
  98. pci14: <ACPI PCI bus> on pcib4
  99. pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci10
  100. pci15: <ACPI PCI bus> on pcib5
  101. pcib6: <PCI-PCI bridge> at device 0.3 on pci9
  102. pci16: <PCI bus> on pcib6
  103. pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
  104. pci6: <ACPI PCI bus> on pcib7
  105. ciss0: <HP Smart Array P400> port 0x4000-0x40ff mem 0xfdd00000-0xfddfffff,0xfdcf0000-0xfdcf0fff irq 18 at device 0.0 on pci6
  106. ciss0: [ITHREAD]
  107. pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
  108. pci17: <ACPI PCI bus> on pcib8
  109. pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci17
  110. pci18: <ACPI PCI bus> on pcib9
  111. pcib10: <PCI-PCI bridge> at device 5.0 on pci0
  112. pci22: <PCI bus> on pcib10
  113. pcib11: <ACPI PCI-PCI bridge> at device 6.0 on pci0
  114. pci23: <ACPI PCI bus> on pcib11
  115. em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x5000-0x501f mem 0xfdfe0000-0xfdffffff,0xfdfc0000-0xfdfdffff irq 19 at device 0.0 on pci23
  116. em0: Using MSI interrupt
  117. em0: Ethernet address: 00:1f:29:5b:c5:30
  118. em0: [FILTER]
  119. em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x5020-0x503f mem 0xfdfa0000-0xfdfbffff,0xfdf80000-0xfdf9ffff irq 16 at device 0.1 on pci23
  120. em1: Using MSI interrupt
  121. em1: Ethernet address: 00:1f:29:5b:c5:31
  122. em1: [FILTER]
  123. pcib12: <PCI-PCI bridge> at device 7.0 on pci0
  124. pci24: <PCI bus> on pcib12
  125. pcib13: <ACPI PCI-PCI bridge> at device 28.0 on pci0
  126. pci2: <ACPI PCI bus> on pcib13
  127. pcib14: <PCI-PCI bridge> at device 0.0 on pci2
  128. pci3: <PCI bus> on pcib14
  129. bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3
  130. miibus0: <MII bus> on bce0
  131. brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
  132. brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
  133. bce0: Ethernet address: 00:21:5a:ee:cd:88
  134. bce0: [ITHREAD]
  135. bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x01090605); Flags( MFW MSI )
  136. pcib15: <ACPI PCI-PCI bridge> at device 28.1 on pci0
  137. pci4: <ACPI PCI bus> on pcib15
  138. pcib16: <PCI-PCI bridge> at device 0.0 on pci4
  139. pci5: <PCI bus> on pcib16
  140. bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xfa000000-0xfbffffff irq 17 at device 0.0 on pci5
  141. miibus1: <MII bus> on bce1
  142. brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
  143. brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
  144. bce1: Ethernet address: 00:21:5a:ee:cd:86
  145. bce1: [ITHREAD]
  146. bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x01090605); Flags( MFW MSI )
  147. uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1000-0x101f irq 16 at device 29.0 on pci0
  148. uhci0: [GIANT-LOCKED]
  149. uhci0: [ITHREAD]
  150. usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
  151. usb0: USB revision 1.0
  152. uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
  153. uhub0: 2 ports with 2 removable, self powered
  154. uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1020-0x103f irq 17 at device 29.1 on pci0
  155. uhci1: [GIANT-LOCKED]
  156. uhci1: [ITHREAD]
  157. usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
  158. usb1: USB revision 1.0
  159. uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
  160. uhub1: 2 ports with 2 removable, self powered
  161. uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1040-0x105f irq 18 at device 29.2 on pci0
  162. uhci2: [GIANT-LOCKED]
  163. uhci2: [ITHREAD]
  164. usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
  165. usb2: USB revision 1.0
  166. uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
  167. uhub2: 2 ports with 2 removable, self powered
  168. uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x1060-0x107f irq 19 at device 29.3 on pci0
  169. uhci3: [GIANT-LOCKED]
  170. uhci3: [ITHREAD]
  171. usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
  172. usb3: USB revision 1.0
  173. uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
  174. uhub3: 2 ports with 2 removable, self powered
  175. ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf7df0000-0xf7df03ff irq 16 at device 29.7 on pci0
  176. ehci0: [GIANT-LOCKED]
  177. ehci0: [ITHREAD]
  178. usb4: waiting for BIOS to give up control
  179. usb4: EHCI version 1.0
  180. usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
  181. usb4: <Intel 63XXESB USB 2.0 controller> on ehci0
  182. usb4: USB revision 2.0
  183. uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
  184. uhub4: 8 ports with 8 removable, self powered
  185. pcib17: <ACPI PCI-PCI bridge> at device 30.0 on pci0
  186. pci1: <ACPI PCI bus> on pcib17
  187. vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xd8000000-0xdfffffff,0xf7ff0000-0xf7ffffff irq 23 at device 3.0 on pci1
  188. pci1: <base peripheral> at device 4.0 (no driver attached)
  189. pci1: <base peripheral> at device 4.2 (no driver attached)
  190. uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 22 at device 4.4 on pci1
  191. uhci4: [GIANT-LOCKED]
  192. uhci4: [ITHREAD]
  193. usb5: <UHCI (generic) USB controller> on uhci4
  194. usb5: USB revision 1.0
  195. uhub5: <(0x103c) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
  196. uhub5: 2 ports with 2 removable, self powered
  197. pci1: <serial bus> at device 4.6 (no driver attached)
  198. isab0: <PCI-ISA bridge> at device 31.0 on pci0
  199. isa0: <ISA bus> on isab0
  200. atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.1 on pci0
  201. ata0: <ATA channel 0> on atapci0
  202. ata0: [ITHREAD]
  203. ata1: <ATA channel 1> on atapci0
  204. ata1: [ITHREAD]
  205. acpi_tz0: <Thermal Zone> on acpi0
  206. atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
  207. atkbd0: <AT Keyboard> irq 1 on atkbdc0
  208. kbd0 at atkbd0
  209. atkbd0: [GIANT-LOCKED]
  210. atkbd0: [ITHREAD]
  211. sio0: configured irq 4 not in bitmap of probed irqs 0
  212. sio0: port may not be enabled
  213. sio0: configured irq 4 not in bitmap of probed irqs 0
  214. sio0: port may not be enabled
  215. sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
  216. sio0: type 16550A
  217. sio0: [FILTER]
  218. orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xe6000-0xe7fff on isa0
  219. ppc0: cannot reserve I/O port range
  220. sc0: <System console> at flags 0x100 on isa0
  221. sc0: VGA <16 virtual consoles, flags=0x300>
  222. sio1: configured irq 3 not in bitmap of probed irqs 0
  223. sio1: port may not be enabled
  224. sio1: configured irq 3 not in bitmap of probed irqs 0
  225. sio1: port may not be enabled
  226. sio1 at port 0x2f8-0x2ff irq 3 on isa0
  227. sio1: type 16550A
  228. sio1: [FILTER]
  229. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
  230. ukbd0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5
  231. kbd2 at ukbd0
  232. ums0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5
  233. ums0: 3 buttons.
  234. uhub6: <HP Virtual Hub, class 9/0, rev 1.10/0.01, addr 3> on uhub5
  235. uhub6: 7 ports with 7 removable, self powered
  236. Timecounters tick every 1.000 msec
  237. hptrr: no controller detected.
  238. acd0: DVDROM <DV-28E-V/C.AB> at ata0-master UDMA33
  239. SMP: AP CPU #2 Launched!
  240. SMP: AP CPU #1 Launched!
  241. SMP: AP CPU #3 Launched!
  242. SMP: AP CPU #7 Launched!
  243. SMP: AP CPU #4 Launched!
  244. SMP: AP CPU #6 Launched!
  245. SMP: AP CPU #5 Launched!
  246. da0 at ciss0 bus 0 target 0 lun 0
  247. da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-5 device
  248. da0: 135.168MB/s transfers
  249. da0: 69973MB (143305920 512 byte sectors: 255H 32S/T 17562C)
  250. Trying to mount root from ufs:/dev/da0s1a

Submit a correction or amendment below (click here to make a fresh posting)
After submitting an amendment, you'll be able to view the differences between the old and new posts easily.

Syntax highlighting:

To highlight particular lines, prefix each line with @@


Remember me so that I can delete my post