Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Index: target/linux/brcm-2.4/base-files/etc/preinit.arch
- ===================================================================
- --- target/linux/brcm-2.4/base-files/etc/preinit.arch (revision 13514)
- +++ target/linux/brcm-2.4/base-files/etc/preinit.arch (working copy)
- @@ -31,14 +32,13 @@
- # hardware specific overrides
- case "$(cat /proc/diag/model)" in
- "Linksys WAP54G V1") ifname=eth1;;
- + "Linksys WRT350N") insmod tg3;;
- "ASUS WL-HDD") ifname=eth1;;
- "ASUS WL-300g") ifname=eth1;;
- "ASUS (unknown, BCM4702)") ifname=eth1;;
- "Sitecom WL-105b") ifname=eth1;;
- esac
- -failsafe_ip
- -
- check_module () {
- module="$1"; shift; params="$*"
- @@ -53,6 +53,8 @@
- check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
- } || rmmod switch-core
- +failsafe_ip
- +
- [ -d /proc/switch/eth0 ] && {
- echo 1 > /proc/switch/eth0/reset
- Index: target/linux/brcm47xx/Makefile
- ===================================================================
- --- target/linux/brcm47xx/Makefile (revision 13514)
- +++ target/linux/brcm47xx/Makefile (working copy)
- @@ -11,7 +11,7 @@
- BOARDNAME:=Broadcom BCM947xx/953xx
- FEATURES:=squashfs usb
- -LINUX_VERSION:=2.6.25.20
- +LINUX_VERSION:=2.6.27.4
- include $(INCLUDE_DIR)/target.mk
- DEFAULT_PACKAGES += kmod-switch kmod-diag
- Index: package/mac80211/Makefile
- ===================================================================
- --- package/mac80211/Makefile (revision 13514)
- +++ package/mac80211/Makefile (working copy)
- @@ -320,6 +320,8 @@
- $(if $(CONFIG_RFKILL),-DCONFIG_B43_RFKILL -DCONFIG_B43LEGACY_RFKILL) \
- $(if $(CONFIG_PCMCIA),-DCONFIG_B43_PCMCIA) \
- $(if $(CONFIG_DEBUG_FS), -DCONFIG_MAC80211_DEBUGFS) \
- + -DCONFIG_B43_NPHY \
- + -DCONFIG_B43_DEBUG \
- -D__CONFIG_MAC80211_RC_DEFAULT=minstrel \
- MAKE_OPTS:= \
- @@ -332,6 +334,8 @@
- CONFIG_MAC80211_RC_MINSTREL=y \
- CONFIG_MAC80211_LEDS=$(CONFIG_LEDS_TRIGGERS) \
- CONFIG_MAC80211_DEBUGFS=$(CONFIG_DEBUG_FS) \
- + CONFIG_B43_NPHY=y \
- + CONFIG_B43_DEBUG=y \
- CONFIG_B43_PCMCIA=$(CONFIG_PCMCIA) \
- CONFIG_B43_RFKILL=$(CONFIG_RFKILL) \
- CONFIG_B43LEGACY_RFKILL=$(CONFIG_RFKILL) \
- @@ -343,17 +347,18 @@
- MODPROBE=:
- define Build/Prepare
- - rm -rf $(PKG_BUILD_DIR)
- - mkdir -p $(PKG_BUILD_DIR)
- + rm -rf "$(PKG_BUILD_DIR)"
- + mkdir -p "$(PKG_BUILD_DIR)"
- $(PKG_UNPACK)
- $(Build/Patch)
- $(if $(QUILT),touch $(PKG_BUILD_DIR)/.quilt_used)
- - unzip -jod $(PKG_BUILD_DIR) $(DL_DIR)/$(RT61FW)
- - unzip -jod $(PKG_BUILD_DIR) $(DL_DIR)/$(RT71FW)
- - -unzip -jod $(PKG_BUILD_DIR) $(DL_DIR)/$(RT2860FW)
- - $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
- + unzip -jod "$(PKG_BUILD_DIR)" $(DL_DIR)/$(RT61FW)
- + unzip -jod "$(PKG_BUILD_DIR)" $(DL_DIR)/$(RT71FW)
- + -unzip -jod "$(PKG_BUILD_DIR)" $(DL_DIR)/$(RT2860FW)
- + $(TAR) -C "$(PKG_BUILD_DIR)" -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
- + $(TAR) -C "$(PKG_BUILD_DIR)" -xjf $(DL_DIR)/$(PKG_B43_FWV4_SOURCE)
- + $(TAR) -C "$(PKG_BUILD_DIR)" -xjf $(DL_DIR)/$(PKG_B43_FWCUTTER_SOURCE)
- rm -rf $(PKG_BUILD_DIR)/include/linux/ssb
- - rm $(PKG_BUILD_DIR)/include/net/ieee80211.h
- rm $(PKG_BUILD_DIR)/include/net/ieee80211_radiotap.h
- rm $(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h
- endef
- @@ -366,6 +371,9 @@
- define Build/Compile
- $(call Build/Compile/kmod)
- +
- + $(MAKE) -C "$(PKG_BUILD_DIR)/$(PKG_B43_FWCUTTER_NAME)-$(PKG_B43_FWCUTTER_VERSION)" \
- + CFLAGS="-I$(STAGING_DIR_HOST)/include -include endian.h"
- endef
- define Build/InstallDev
Advertisement
Add Comment
Please, Sign In to add comment
