API tools faq
paste
Guest User

Untitled

a guest
Sep 27th, 2012
69
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 59.32 KB | None | 0 0
raw download clone embed print report
  1. <6>[ 0.000000] Booting Linux on physical CPU 0
  2. <6>[ 0.000000] Initializing cgroup subsys cpu
  3. <5>[ 0.000000] Linux version 3.0.43-cyanogenmod-g5b85ce8 (pinky-ghost@cyanogenmod) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #2 SMP PREEMPT Sun Sep 23 22:36:05 PDT 2012
  4. <4>[ 0.000000] CPU: ARMv7 Processor [511f04d0] revision 0 (ARMv7), cr=10c5387d
  5. <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  6. <4>[ 0.000000] Machine: SAMSUNG M2_ATT
  7. <6>[ 0.000000] m0 size 8b00000 m1 start 8f200000
  8. <3>[ 0.000000] heap->name mm, mb->start c0000000
  9. <6>[ 0.000000] memory pool 3 (start f92ff000 size 6d00000) initialized
  10. <3>[ 0.000000] Reserving memory at address ea000000 size: 100000
  11. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  12. <6>[ 0.000000] socinfo_init: v6, id=87, ver=3.1, raw_id=1717, raw_ver=4, hw_pla-t=1, hw_pla-t_ver=65536
  13. <6>[ 0.000000] accessory_chip=0 hw_pla-t_subtype=0
  14. <6>[ 0.000000] sec_getlog_supply_meminfo: 40000000 80000000 0 0
  15. <4>[ 0.000000] Zone PFN ranges:
  16. <4>[ 0.000000] Normal 0x00080200 -> 0x000ab700
  17. <4>[ 0.000000] HighMem 0x000ab700 -> 0x000fffff
  18. <4>[ 0.000000] Movable zone start PFN for each node
  19. <4>[ 0.000000] early_node_map[6] active PFN ranges
  20. <4>[ 0.000000] 0: 0x00080200 -> 0x00088d00
  21. <4>[ 0.000000] 0: 0x0008f200 -> 0x0008f700
  22. <4>[ 0.000000] 0: 0x00090000 -> 0x0009fe00
  23. <4>[ 0.000000] 0: 0x000a9700 -> 0x000bff00
  24. <4>[ 0.000000] 0: 0x000bffff -> 0x000ea000
  25. <4>[ 0.000000] 0: 0x000ea100 -> 0x000f92ff
  26. <7>[ 0.000000] On node 0 totalpages: 428032
  27. <7>[ 0.000000] Normal zone: 1386 pages used for memmap
  28. <7>[ 0.000000] Normal zone: 0 pages reserved
  29. <7>[ 0.000000] Normal zone: 108694 pages, LIFO batch:31
  30. <7>[ 0.000000] HighMem zone: 2488 pages used for memmap
  31. <7>[ 0.000000] HighMem zone: 315464 pages, LIFO batch:31
  32. <6>[ 0.000000] allocating 11304960 bytes at c2356000 (82556000 physical) for fb
  33. <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c2e21000 s9920 r8192 d14656 u32768
  34. <7>[ 0.000000] pcpu-alloc: s9920 r8192 d14656 u32768 alloc=8*4096
  35. <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
  36. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 424158
  37. <5>[ 0.000000] Kernel command line: androidboot.hardware=qcom user_debug=31 sec_log=0x80000@0x88d00008 sec_dbg=0x40000@0x88d90004 sec_debug.reset_reason=0x1a2b3c00 etb_buf=0x4000@0x8fffb9c0 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 cordon=b24778180f80aa22ad871f2255cba8e5 loglevel=4 samsung.hardware=SGH-I747 androidboot.emmc_checksum=3 androidboot.bootloader=I747UCALG1 androidboot.nvdata_backup=0 androidboot.boot_recovery=0 level=0x574f4c44 sec_pvs=0 androidboot.emmc=true androidboot.serialno=7c1b7113 androidboot.baseband=msm
  38. <0>[ 0.000000] sec_dbg_setup: str=@0x88d90004
  39. <0>[ 0.000000] sec_dbg_setup: secdbg_paddr = 0x88d90004
  40. <0>[ 0.000000] sec_dbg_setup: secdbg_size = 0x40000
  41. <0>[ 0.000000] etb_buf_setup: str=@0x8fffb9c0
  42. <0>[ 0.000000] etb_buf_setup: secdbg_paddr = 0x8fffb9c0
  43. <0>[ 0.000000] etb_buf_setup: secdbg_size = 0x4000
  44. <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  45. <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  46. <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  47. <6>[ 0.000000] Memory: 139MB 5MB 254MB 360MB 672MB 241MB = 1672MB total
  48. <5>[ 0.000000] Memory: 1667028k/1937360k available, 45100k reserved, 1271808K highmem
  49. <5>[ 0.000000] Virtual kernel memory layout:
  50. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  51. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  52. <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  53. <5>[ 0.000000] vmalloc : 0xe5800000 - 0xfe000000 ( 392 MB)
  54. <5>[ 0.000000] lowmem : 0xc0000000 - 0xe5000000 ( 592 MB)
  55. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  56. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  57. <5>[ 0.000000] .init : 0xc0008000 - 0xc0100000 ( 992 kB)
  58. <5>[ 0.000000] .text : 0xc0100000 - 0xc0bd156c (11078 kB)
  59. <5>[ 0.000000] .data : 0xc0c00000 - 0xc0cd3088 ( 845 kB)
  60. <5>[ 0.000000] .bss : 0xc0cd30ac - 0xc1130eb4 (4472 kB)
  61. <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  62. <6>[ 0.000000] Preemptible hierarchical RCU implementation.
  63. <6>[ 0.000000] NR_IRQS:817
  64. <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
  65. <6>[ 0.000000] Console: colour dummy device 80x30
  66. <6>[ 0.150190] Calibrating delay using timer specific routine.. 13.54 BogoMIPS (lpj=67700)
  67. <6>[ 0.150221] pid_max: default: 32768 minimum: 301
  68. <6>[ 0.150587] Mount-cache hash table entries: 512
  69. <6>[ 0.151625] Initializing cgroup subsys debug
  70. <6>[ 0.151625] Initializing cgroup subsys cpuacct
  71. <6>[ 0.151716] Initializing cgroup subsys freezer
  72. <6>[ 0.151777] CPU: Testing write buffer coherency: ok
  73. <6>[ 0.151838] ftrace: allocating 27067 entries in 80 pages
  74. <4>[ 0.153181] ------------[ cut here ]------------
  75. <4>[ 0.153212] WARNING: at ../../../../../../kernel/samsung/d2/kernel/trace/ftrace.c:1496 ftrace_bug+0xf0/0x178()
  76. <4>[ 0.153242] Modules linked in:
  77. <4>[ 0.153273] [<c010d550>] (unwind_backtrace+0x0/0xec) from [<c080462c>] (dump_stack+0x20/0x24)
  78. <4>[ 0.153334] [<c080462c>] (dump_stack+0x20/0x24) from [<c0171d94>] (warn_slowpath_common+0x5c/0x74)
  79. <4>[ 0.153364] [<c0171d94>] (warn_slowpath_common+0x5c/0x74) from [<c0171dd8>] (warn_slowpath_null+0x2c/0x34)
  80. <4>[ 0.153395] [<c0171dd8>] (warn_slowpath_null+0x2c/0x34) from [<c01c3bd0>] (ftrace_bug+0xf0/0x178)
  81. <4>[ 0.153425] [<c01c3bd0>] (ftrace_bug+0xf0/0x178) from [<c01c4740>] (ftrace_process_locs+0x1f4/0x2e4)
  82. <4>[ 0.153456] [<c01c4740>] (ftrace_process_locs+0x1f4/0x2e4) from [<c001c8e8>] (ftrace_init+0x1fc/0x248)
  83. <4>[ 0.153486] [<c001c8e8>] (ftrace_init+0x1fc/0x248) from [<c0008ac8>] (start_kernel+0x414/0x47c)
  84. <4>[ 0.153547] [<c0008ac8>] (start_kernel+0x414/0x47c) from [<8020803c>] (0x8020803c)
  85. <4>[ 0.153578] ---[ end trace da227214a82491b7 ]---
  86. <6>[ 0.153609] ftrace faulted on writing [<c07e9160>] activity_stats_update+0x14/0xa0
  87. <6>[ 0.153944] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  88. <6>[ 0.160537] Brought up 2 CPUs
  89. <6>[ 0.160537] SMP: Total of 2 processors activated (27.08 BogoMIPS).
  90. <6>[ 0.176865] print_constraints: dummy:
  91. <3>[ 0.176957] rdev_init_debugfs: Error-Bad Function Input
  92. <6>[ 0.177231] NET: Registered protocol family 16
  93. <3>[ 0.177445] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  94. <0>[ 0.180009] sec_debug_init: enable=0
  95. <0>[ 0.180039] sec_debug_init: restart_reason : 0xe580865c
  96. <6>[ 0.180070] socinfo_init: v6, id=87, ver=3.1, raw_id=1717, raw_ver=4, hw_pla-t=1, hw_pla-t_ver=65536
  97. <6>[ 0.180100] accessory_chip=0 hw_pla-t_subtype=0
  98. <6>[ 0.180100] meminfo_init: smem ram ptable found: ver: 0 len: 6
  99. <6>[ 0.180131] Found 2 memory banks grouped into 16 memory regions
  100. <6>[ 0.180161] msm_tsens_early_init: done
  101. <6>[ 0.180192] msm_rpm_init: RPM firmware 3.0.16843271
  102. <4>[ 0.198199] rpm-regulator driver has probed .
  103. <6>[ 0.199755] rcg_clk_handoff: sdc1_clk rate=48000000
  104. <6>[ 0.199847] rcg_clk_handoff: mdp_clk rate=200000000
  105. <6>[ 0.202472] saw_probe: id=0, name=8921_s5
  106. <6>[ 0.202899] saw_probe: id=1, name=8921_s6
  107. <6>[ 0.203326] gpio_vreg_probe: id=202, name=ext_5v, gpio=202, gpio_label=ext_5v_en
  108. <6>[ 0.203662] pm8921_probe: PMIC revision 1: F4
  109. <6>[ 0.203692] pm8921_probe: PMIC revision 2: 06
  110. <6>[ 0.203692] pm8921_probe: PMIC version: PM8921 rev 3.0
  111. <6>[ 0.203723] pm8921_probe: PMIC Restart Reason: Triggered from SMPL (sudden momentary power loss)
  112. <6>[ 0.206012] pm_gpio_probe: OK: base=152, ngpio=44
  113. <6>[ 0.206409] pm8xxx_mpp_probe: OK: base=196, ngpio=12
  114. <6>[ 0.212177] gpio_vreg_probe: id=193, name=ext_otg_sw, gpio=193, gpio_label=ext_otg_sw_en
  115. <6>[ 0.227743] ram_console: got buffer at bff00000, size ff000
  116. <6>[ 0.227865] ram_console: found existing buffer, size 8415, start 8415
  117. <6>[ 0.258995] console [ram0] enabled
  118. <3>[ 0.259728] [msm8960_init_cam:2992]setting done!!
  119. <1>[ 0.261925] select_freq_plan: ACPU PVS: Fast
  120. <6>[ 0.262047] select_freq_plan: Max ACPU freq: 1512000 KHz
  121. <6>[ 0.265191] cpufreq_table_init: CPU0: 12 scaling frequencies supported.
  122. <6>[ 0.265191] cpufreq_table_init: CPU1: 12 scaling frequencies supported.
  123. <6>[ 0.265222] samsung sys class init.
  124. <6>[ 0.265252] samsung sys class end.
  125. <6>[ 0.265771] tsp 1.8V on is finished.
  126. <6>[ 0.266351] tsp 3.3V on is finished.
  127. <6>[ 0.271844] samsung_m2_att_init : system rev = 16, Secjack Using
  128. <6>[ 0.272455] [WIFI] system_rev = 16
  129. <6>[ 0.272455] brcm_wlan_init: start
  130. <6>[ 0.272546] brcm_init_wlan_mem: WIFI MEM Allocated
  131. <6>[ 0.276270] sps:REVISION of BAM 0xe5838000 is 0x5.
  132. <6>[ 0.276911] sps is ready.
  133. <6>[ 0.292995] bio: create slab <bio-0> at 0
  134. <6>[ 0.293300] MAX8952 loading!!
  135. <6>[ 0.293514] ION heap vmalloc created
  136. <6>[ 0.293575] ION heap mm created at a0000000 with size 9600000
  137. <6>[ 0.293605] ION heap mm_fw created at 9fe00000 with size 1e0000
  138. <6>[ 0.293636] ION heap mfc created at a9600000 with size 2000
  139. <6>[ 0.293667] ION heap sf created at f9302000 with size 5000000
  140. <6>[ 0.293697] ION heap iommu created
  141. <6>[ 0.293728] ION heap qsecom created at fe302000 with size 1700000
  142. <6>[ 0.293758] ION heap audio created at ffa02000 with size 4cf000
  143. <5>[ 0.294307] pm8xxx_pwm_probe: OK
  144. <5>[ 0.294674] SCSI subsystem initialized
  145. <6>[ 0.294857] usbcore: registered new interface driver usbfs
  146. <6>[ 0.294948] usbcore: registered new interface driver hub
  147. <6>[ 0.295040] usbcore: registered new device driver usb
  148. <6>[ 0.295589] i2c-gpio i2c-gpio.9: using pins 95 (SDA) and 96 (SCL)
  149. <6>[ 0.295742] i2c-gpio i2c-gpio.11: using pins 73 (SDA) and 74 (SCL)
  150. <6>[ 0.295925] i2c-gpio i2c-gpio.16: using pins 48 (SDA) and 47 (SCL)
  151. <6>[ 0.296139] i2c-gpio i2c-gpio.13: using pins 24 (SDA) and 25 (SCL)
  152. <6>[ 0.296322] i2c-gpio i2c-gpio.17: using pins 32 (SDA) and 33 (SCL)
  153. <3>[ 0.296444] i2c i2c-14: Invalid 7-bit I2C address 0x00
  154. <3>[ 0.296566] i2c i2c-14: Can't create device at 0x00
  155. <6>[ 0.296688] i2c-gpio i2c-gpio.14: using pins 12 (SDA) and 13 (SCL)
  156. <3>[ 0.297085] rdev_init_debugfs: Error-Bad Function Input
  157. <4>[ 0.297207] max8952 19-0060: VID0/1 gpio invalid: DVS not available.
  158. <3>[ 0.297726] max8952 19-0060: DVS modes disabled because VID0 and VID1 do not have proper controls.
  159. <6>[ 0.304593] i2c-gpio i2c-gpio.19: using pins 71 (SDA) and 72 (SCL)
  160. <6>[ 0.305356] Advanced Linux Sound Architecture Driver Version 1.0.24.
  161. <6>[ 0.305753] Bluetooth: Core ver 2.16
  162. <6>[ 0.305814] NET: Registered protocol family 31
  163. <6>[ 0.305814] Bluetooth: HCI device and connection manager initialized
  164. <6>[ 0.305844] Bluetooth: HCI socket layer initialized
  165. <6>[ 0.305844] Bluetooth: L2CAP socket layer initialized
  166. <6>[ 0.305875] Bluetooth: SCO socket layer initialized
  167. <6>[ 0.306271] cfg80211: Calling CRDA to update world regulatory domain
  168. <6>[ 0.306485] Switching to clocksource gp_timer
  169. <6>[ 0.324462] NET: Registered protocol family 2
  170. <6>[ 0.324584] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  171. <6>[ 0.324858] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  172. <6>[ 0.325743] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  173. <6>[ 0.326751] TCP: Hash tables configured (established 65536 bind 65536)
  174. <6>[ 0.326751] TCP reno registered
  175. <6>[ 0.326781] UDP hash table entries: 256 (order: 1, 8192 bytes)
  176. <6>[ 0.326781] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  177. <6>[ 0.327117] NET: Registered protocol family 1
  178. <6>[ 0.327422] RPC: Registered named UNIX socket transport module.
  179. <6>[ 0.327422] RPC: Registered udp transport module.
  180. <6>[ 0.327453] RPC: Registered tcp transport module.
  181. <6>[ 0.327453] RPC: Registered tcp NFSv4.1 backchannel transport module.
  182. <6>[ 0.327636] Trying to unpack rootfs image as initramfs...
  183. <6>[ 0.343750] Freeing initrd memory: 340K
  184. <6>[ 0.343964] PMU: registered new PMU device of type 0
  185. <6>[ 0.344147] PMU: registered new PMU device of type 1
  186. <6>[ 0.344636] msm_etb msm_etb: ETB initialized
  187. <6>[ 0.344819] msm_tpiu msm_tpiu: TPIU initialized
  188. <6>[ 0.344971] msm_funnel msm_funnel: FUNNEL initialized
  189. <6>[ 0.346406] msm_etm msm_etm: ETM initialized
  190. <3>[ 0.346436] msm_etm msm_etm: ETM tracing is not enabled beacausesec_debug is not enabled!
  191. <6>[ 0.346619] QDSS initialized
  192. <6>[ 0.347260] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  193. <6>[ 0.348084] pil_qdsp6v4 pil_qdsp6v4.1: using secure boot
  194. <6>[ 0.348908] pil_qdsp6v4 pil_qdsp6v4.2: using secure boot
  195. <6>[ 0.349977] pil_riva pil_riva: using secure boot
  196. <3>[ 0.351930] smd_channel_probe_worker: allocation table not initialized
  197. <6>[ 0.357393] NET: Registered protocol family 27
  198. <6>[ 0.357942] dspcrashd_probe: Platform driver values: Base = 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead
  199. <6>[ 0.359407] modem_8960_init: modem fatal driver init'ed.
  200. <6>[ 0.359529] lpass_fatal_init: lpass SSR driver init'ed.
  201. <5>[ 0.359896] msm_rpm_log_probe: OK
  202. <6>[ 0.361025] sec_getlog_supply_kloginfo: 0xc0d4259c
  203. <4>[ 0.362368] highmem bounce pool size: 64 pages
  204. <6>[ 0.362490] ashmem: initialized
  205. <6>[ 0.371310] fuse init (API version 7.16)
  206. <6>[ 0.371585] msgmni has been set to 772
  207. <6>[ 0.373416] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  208. <6>[ 0.373416] io scheduler noop registered
  209. <6>[ 0.373447] io scheduler deadline registered (default)
  210. <6>[ 0.373508] io scheduler cfq registered
  211. <6>[ 0.373508] io scheduler sio registered
  212. <3>[ 0.374515] mdp_bus_scale_update_request invalid bus handle
  213. <6>[ 0.377048] mipi_dsi base phy_addr = 0x4700000 virt = 0xe5d00000
  214. <6>[ 0.377048] mmss_sfpb base phy_addr = 0x5700000,virt = 0xe5864000
  215. <7>[ 0.377292] Is_There_cmc624 : CMC624 is not there!!!!
  216. <6>[ 0.377659] set_esd_disable is called
  217. <6>[ 0.377933] setting pdata->panel_info.fb_num to 3. type: 8
  218. <6>[ 0.378330] mdp4_dsi_vsync_init: ndx=0
  219. <6>[ 0.381535] FrameBuffer[0] 720x1280 size=11304960 bytes is registered successfully!
  220. <3>[ 0.381565] pm_runtime: fail to wake up
  221. <7>[ 0.381962] Registered led device: lcd-backlight
  222. <6>[ 0.381992] sec_getlog_supply_fbinfo: 0x82556000 736 1280 32 2
  223. <6>[ 0.383244] setting pdata->panel_info.fb_num to 1. type: 7
  224. <6>[ 0.383641] mdp4_dtv_vsync_init: ndx=0
  225. <6>[ 0.383915] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
  226. <3>[ 0.384159] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group e471ae08
  227. <6>[ 0.384251] hdmi_msm hdmi_msm.1: HDMI HPD: ON
  228. <6>[ 0.384556] setting pdata->panel_info.fb_num to 1. type: 10
  229. <3>[ 0.384678] Inside writeback_driver_init
  230. <3>[ 0.384922] Inside writeback_probe
  231. <6>[ 0.385472] FrameBuffer[2] 1920x1080 size=0 bytes is registered successfully!
  232. <6>[ 0.452067] mipi_samsung_manufacture_id: manufacture_id1=a2
  233. <6>[ 0.452189] mipi_samsung_manufacture_id: manufacture_id2=60
  234. <6>[ 0.452250] mipi_samsung_manufacture_id: manufacture_id3=90
  235. <6>[ 0.452281] mipi_samsung_manufacture_id: manufacture_id=11ba6090
  236. <6>[ 0.452281] first time mpt read
  237. <6>[ 0.452983] read_reg : D3[24] : 00 00 10 02 .0d 09 00 02 .00 00 0b 00 .0e 09 00 01 .00 00 09 00 .0d 09 00 00 .00 00 00 00 .
  238. <6>[ 0.453013] second time mpt read
  239. <6>[ 0.453715] read_reg : D3[24] : 00 00 10 02 .0d 09 00 02 .00 00 0b 00 .0e 09 00 01 .00 00 09 00 .0d 09 00 00 .00 00 00 00 .
  240. <6>[ 0.453746] MTP data is used from first read mtp
  241. <6>[ 0.453746] mipi_samsung_disp_on MTP is determined : 1
  242. <6>[ 0.453776] MTP: 00 00 10 02 0d 09 00 02 00 00 0b 00 0e 09 00 01 00 00 09 00 0d 09 00 00
  243. <6>[ 0.453776] gamma_cell_determine ldi_revision:96
  244. <6>[ 0.453929] generate_gray_scale end
  245. <6>[ 0.454143] Select 4.8 = 0(60)
  246. <6>[ 0.588127] set_esd_enable is called
  247. <6>[ 0.658354]
  248. <6>[ 0.658354] msm_vidc_enc: Inside vid_enc_init()
  249. <6>[ 0.658507]
  250. <6>[ 0.658507] msm_vidc_enc: Inside vid_enc_vcd_init()
  251. <6>[ 0.658782] create mhl sysfile
  252. <6>[ 0.659148] input: sii9234_rcp as /devices/virtual/input/input0
  253. <6>[ 0.735785] msm_serial: driver initialized
  254. <6>[ 0.735968] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  255. <6>[ 0.816938] msm_serial_hs module loaded
  256. <6>[ 0.817030] msm_serial_hsl: detected port #0
  257. <6>[ 0.817030] msm_serial_hsl_probe: Found wakeup gpio 23
  258. <6>[ 0.817213] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16440000 (irq = 186) is a MSM
  259. <6>[ 0.817244] msm_serial_hsl: console setup on port #0
  260. <6>[ 0.946314] console [ttyHSL0] enabled
  261. <6>[ 1.057073] msm_serial_hsl: driver initialized
  262. <6>[ 1.058171] msm_rotator_probe: rotator_hw_revision=2
  263. <6>[ 1.062017] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  264. <6>[ 1.063055] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  265. <6>[ 1.063879] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  266. <6>[ 1.069067] brd: module loaded
  267. <6>[ 1.071326] loop: module loaded
  268. <1>[ 1.071478] pmem: pmem_setup: unable to register pmem driver(pmem_audio) - zero size passed in!
  269. <4>[ 1.079261] android_pmem: probe of android_pmem.4 failed with error -1
  270. <4>[ 1.079780] TZCOM: Enabled clock
  271. <6>[ 1.080421] Loading pn544 driver
  272. <6>[ 1.080543] pn544_probe : IRQ num 394
  273. <6>[ 1.080878] pn544_probe : requesting IRQ 394
  274. <6>[ 1.081245] input: fsa9485 as /devices/platform/i2c-gpio.11/i2c-11/11-0025/input/input1
  275. <6>[ 1.081275] fsa9485_reg_init is called
  276. <6>[ 1.083778] fsa9485 11-0025: fsa9485_reg_init dev ID: 0x0
  277. <4>[ 1.083931] i2c-core: driver [fsa9485] using legacy resume method
  278. <6>[ 1.084266] i2c i2c-12: mpu_probe: 0
  279. <6>[ 1.084297] <6>mldl_cfg:Reset MPU6050 B1
  280. <6>[ 1.087013] set_esd_enable_work_func is called
  281. <6>[ 1.192034] i2c i2c-12: Installing irq using 357
  282. <6>[ 1.192034] i2c i2c-12: Module Param interface = mpuirq
  283. <6>[ 1.192369] i2c i2c-12: inv_mpu_register_slave: +mpu6050 Type 1: Addr: 68 IRQ: 357, Adapt: 12
  284. <6>[ 1.192736] i2c i2c-12: Installing accelirq irq using 357
  285. <4>[ 1.193163] i2c-core: driver [mpu6050] using legacy suspend method
  286. <4>[ 1.193163] i2c-core: driver [mpu6050] using legacy resume method
  287. <6>[ 1.193193] mpu_init: Probe name mpu6050
  288. <6>[ 1.193377] i2c i2c-12: ak8975_mod_probe: ak8975_mod
  289. <6>[ 1.193377] i2c i2c-12: inv_mpu_register_slave: +ak8975 Type 2: Addr: c IRQ: 356, Adapt: 12
  290. <6>[ 1.194964] i2c i2c-12: Installing compassirq irq using 356
  291. <6>[ 1.195208] ak8975_mod_init: Probe name ak8975_mod
  292. <6>[ 1.195482] thread_start
  293. <6>[ 1.197009] a2220_probe - finish
  294. <4>[ 1.197070] i2c-core: driver [audience_a2220] using legacy suspend method
  295. <4>[ 1.197070] i2c-core: driver [audience_a2220] using legacy resume method
  296. <3>[ 1.257714] cm36651_setup_reg: initial proximity value = 2
  297. <6>[ 1.263177] cm36651_setup_reg is success.
  298. <6>[ 1.263757] input: proximity_sensor as /devices/virtual/input/input2
  299. <6>[ 1.264123] input: light_sensor as /devices/virtual/input/input3
  300. <6>[ 1.264306] cm36651_i2c_probe is success.
  301. <6>[ 1.264367] init tzic
  302. <6>[ 1.264733] sec_jack:sec_jack_probe : Registering jack driver
  303. <6>[ 1.264886] input: sec_jack as /devices/virtual/input/input4
  304. <6>[ 1.358278] a2220_bootup_init: starting to load image (2273 passes)...
  305. <6>[ 1.367129] tabla_device_init : Tabla version 2 initialized
  306. <6>[ 1.367770] tabla_device_init : Tabla version 2 initialized
  307. <6>[ 1.367801] probe for other slaves devices of tabla
  308. <6>[ 1.367831] probe for other slaves devices of tabla
  309. <6>[ 1.367862] probe for other slaves devices of tabla
  310. <4>[ 1.367923] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  311. <4>[ 1.367923] i2c-core: driver [tabla-i2c-core] using legacy resume method
  312. <6>[ 1.368930] SCSI Media Changer driver v0.25
  313. <6>[ 1.369998] PPP generic driver version 2.4.2
  314. <6>[ 1.370242] PPP Deflate Compression module registered
  315. <6>[ 1.370242] PPP BSD Compression module registered
  316. <6>[ 1.371066] PPP MPPE Compression module registered
  317. <6>[ 1.371097] NET: Registered protocol family 24
  318. <6>[ 1.371097] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  319. <6>[ 1.371127] CSLIP: code copyright 1989 Regents of the University of California.
  320. <6>[ 1.371493] tun: Universal TUN/TAP device driver, 1.6
  321. <6>[ 1.372287] usbcore: registered new interface driver asix
  322. <6>[ 1.372348] usbcore: registered new interface driver cdc_ether
  323. <6>[ 1.372379] usbcore: registered new interface driver net1080
  324. <6>[ 1.372440] usbcore: registered new interface driver cdc_subset
  325. <6>[ 1.372501] usbcore: registered new interface driver zaurus
  326. <6>[ 1.372531] cdc_ncm: 04-Aug-2011
  327. <6>[ 1.372562] usbcore: registered new interface driver cdc_ncm
  328. <6>[ 1.372592] rmnet_init: BAM devices[8]
  329. <6>[ 1.376041] msm_otg msm_otg: msm_otg probe
  330. <6>[ 1.376102] msm_otg msm_otg: OTG regs = e58b8000
  331. <3>[ 1.378086] msm_otg msm_otg: request irq succeed for otg_power
  332. <6>[ 1.383091] pm8921_charger_register_vbus_sn: c04f3d9c
  333. <6>[ 1.383305] msm_otg msm_otg: success to host_notify_dev_register
  334. <6>[ 1.383457] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  335. <6>[ 1.383763] usbcore: registered new interface driver cdc_acm
  336. <6>[ 1.383763] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  337. <6>[ 1.383854] usbcore: registered new interface driver usblp
  338. <6>[ 1.383854] Initializing USB Mass Storage driver...
  339. <6>[ 1.383915] usbcore: registered new interface driver usb-storage
  340. <6>[ 1.383915] USB Mass Storage support registered.
  341. <6>[ 1.383976] usbcore: registered new interface driver ums-alauda
  342. <6>[ 1.384129] usbcore: registered new interface driver ums-cypress
  343. <6>[ 1.384190] usbcore: registered new interface driver ums-datafab
  344. <6>[ 1.384220] usbcore: registered new interface driver ums-freecom
  345. <6>[ 1.384312] usbcore: registered new interface driver ums-isd200
  346. <6>[ 1.384373] usbcore: registered new interface driver ums-jumpshot
  347. <6>[ 1.384434] usbcore: registered new interface driver ums-karma
  348. <6>[ 1.384495] usbcore: registered new interface driver ums-onetouch
  349. <6>[ 1.384526] usbcore: registered new interface driver ums-sddr09
  350. <6>[ 1.384587] usbcore: registered new interface driver ums-sddr55
  351. <6>[ 1.384648] usbcore: registered new interface driver ums-usbat
  352. <6>[ 1.384770] usbcore: registered new interface driver usbserial
  353. <6>[ 1.384770] usbserial: USB Serial Driver core
  354. <6>[ 1.384800] USB Serial support registered for pl2303
  355. <6>[ 1.384892] usbcore: registered new interface driver pl2303
  356. <6>[ 1.384892] pl2303: Prolific PL2303 USB to serial adaptor driver
  357. <6>[ 1.385014] USB Serial support registered for Qualcomm USB modem
  358. <6>[ 1.385075] usbcore: registered new interface driver qcserial
  359. <6>[ 1.385136] usbcore: registered new interface driver usb_ehset_test
  360. <6>[ 1.385228] usbcore: registered new interface driver diag_bridge
  361. <6>[ 1.385319] usbcore: registered new interface driver mdm_bridge
  362. <6>[ 1.385624] msm_otg msm_otg: OTG_STATE_UNDEFINED state
  363. <7>[ 1.385777] init
  364. <6>[ 1.386113] usb: android_probe pdata: c0c51c60
  365. <6>[ 1.386204] msm_hsusb msm_hsusb: [usb_gadget_probe_driver] hw_ep_max = 32
  366. <7>[ 1.386296] usb: android_bind disconnect
  367. <6>[ 1.386326] usb:: ci13xxx_pullup is_active: 0
  368. <6>[ 1.386326] usb:: ci13xxx_pullup udc->udc_driver->flags:17
  369. <6>[ 1.386326] usb:: ci13xxx_pullup !udc->vbus_active:1, !udc->driver:1
  370. <7>[ 1.389623] usb: usb_string_id cdev(0xe4068100)->next_string_id=1
  371. <6>[ 1.389806] android_usb gadget: Mass Storage Function, version: 2009/09/11
  372. <6>[ 1.389806] android_usb gadget: Number of LUNs=2
  373. <6>[ 1.389836] lun0: LUN: removable read only CD-ROM file: (no medium)
  374. <6>[ 1.389836] lun1: LUN: removable file: (no medium)
  375. <7>[ 1.390111] usb: usb_string_id cdev(0xe4068100)->next_string_id=2
  376. <7>[ 1.390111] usb: usb_string_id cdev(0xe4068100)->next_string_id=3
  377. <6>[ 1.390141] android_bind : serial_string: 7c1b7113
  378. <7>[ 1.390141] usb: usb_string_id cdev(0xe4068100)->next_string_id=4
  379. <7>[ 1.390172] usb: composite_bind idVendor=0x0, idProduct=0x0
  380. <7>[ 1.390172] usb: composite_bind bcdDevice=0x0
  381. <7>[ 1.390172] usb: composite_bind composite_manufacturer=
  382. <6>[ 1.390202] android_usb gadget: android_usb ready
  383. <6>[ 1.391942] diagchar initialized now
  384. <6>[ 1.392339] mousedev: PS/2 mouse device common for all mice
  385. <6>[ 1.393773] input: sec_keys as /devices/platform/sec_keys/input/input5
  386. <6>[ 1.394567] usbcore: registered new interface driver xpad
  387. <6>[ 1.394872] input: sec_touchscreen as /devices/i2c-3/3-0048/input/input6
  388. <6>[ 1.395513] mms_ts 3-0048: [TSP]fw version 0xbb !!!!
  389. <6>[ 1.395971] mms_ts 3-0048: [TSP]hw rev = 0x01
  390. <3>[ 1.397253] mms_ts 3-0048: [TSP] ISC Ver [0xbb] [0x20] [0x20]
  391. <3>[ 1.401953] mms_ts 3-0048: [TSP] fw is latest. Do not update.
  392. <6>[ 1.407874] mms_ts 3-0048: Melfas MMS-series touch controller initialized
  393. <6>[ 1.408332] input: sec_powerkey as /devices/platform/msm_ssbi.0/pm8921-core/sec_powerkey/input/input7
  394. <6>[ 1.410041] input: barometer_sensor as /devices/virtual/input/input8
  395. <6>[ 1.411445] using rtc device, pm8xxx_rtc, for alarms
  396. <6>[ 1.411475] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  397. <6>[ 1.411780] i2c /dev entries driver
  398. <6>[ 1.413947] msm_otg msm_otg: phy_reset: success
  399. <6>[ 1.413947] msm_otg_link_reset USB_USBMODE: 0x10
  400. <6>[ 1.414253] lirc_dev: IR Remote Control driver registered, major 237
  401. <6>[ 1.414283] IR NEC protocol handler initialized
  402. <6>[ 1.414283] IR RC5(x) protocol handler initialized
  403. <6>[ 1.414283] IR RC6 protocol handler initialized
  404. <6>[ 1.414314] IR JVC protocol handler initialized
  405. <6>[ 1.414314] IR Sony protocol handler initialized
  406. <6>[ 1.414314] IR RC5 (streamzap) protocol handler initialized
  407. <6>[ 1.414344] IR LIRC bridge handler initialized
  408. <6>[ 1.414344] Linux video capture interface: v2.00
  409. <6>[ 1.414436] usbcore: registered new interface driver uvcvideo
  410. <6>[ 1.414436] USB Video Class driver (v1.1.0)
  411. <3>[ 1.415168] [__s5c73m3_probe:3825] S5C73M3 probe
  412. <3>[ 1.418892] [s5c73m3_sensor_probe_cb:3800] Entered
  413. <3>[ 1.423683] [s5c73m3_i2c_probe:3682] Entered
  414. <3>[ 1.427926] [s5c73m3_init_client:3388] Entered
  415. <3>[ 1.432290] [s5c73m3_i2c_probe:3702] Exit
  416. <3>[ 1.436441] [s5c73m3_sensor_probe:3733] Entered
  417. <3>[ 1.440805] [s5c73m3_spi_init:226] Entered
  418. <3>[ 1.444925] [s5c73m3_spi_probe:191] Entered
  419. <3>[ 1.449076] [s5c73m3_spi_probe:201] s5c73m3_spi successfully probed
  420. <3>[ 1.455363] [s5c73m3_sensor_probe : 3756] Probe_done!!
  421. <7>[ 1.461101] ############# s5k6a3yx_probe ##############
  422. <7>[ 1.461132] #######s5k6a3yx_sensor_v4l2_probe #########
  423. <6>[ 1.463634] max17040_probe: MAX17043 driver Loading!
  424. <6>[ 1.463665] max17040_get_version :
  425. <6>[ 1.464153] max17040 13-0036: MAX17040 Fuel-Gauge Ver 00
  426. <6>[ 1.464733] max17040_get_rcomp : current rcomp = 0x851c(85)
  427. <6>[ 1.464764] [max17048] using RCOMP (0x851c)
  428. <6>[ 1.465740] max17040_get_rcomp : current rcomp = 0x851c(85)
  429. <6>[ 1.469311] max17040_work : VCELL:3836mV, AVGVCELL:3836mV
  430. <6>[ 1.469311] max17040_work : Raw SOC:4362%, SOC:43%
  431. <6>[ 1.470318] max17040_work : CONFIG:0x1c85, RATE:0x8c00
  432. <6>[ 1.470837] max17040_work : STATUS:0xff01, temperature:20
  433. <4>[ 1.477124] i2c-core: driver [max17040] using legacy suspend method
  434. <4>[ 1.477124] i2c-core: driver [max17040] using legacy resume method
  435. <6>[ 1.477735] smb347_probe: SMB347 driver Loading!
  436. <6>[ 1.477979] max17040 13-0036: d0bfh,4257h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,8c00h,067dh,ff01h,ffffh,
  437. <4>[ 1.481947] i2c-core: driver [smb347] using legacy suspend method
  438. <4>[ 1.481977] i2c-core: driver [smb347] using legacy resume method
  439. <6>[ 1.502975] pm8xxx_tm_probe: OK
  440. <6>[ 1.503952] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) Initialized
  441. <6>[ 1.504135] Bluetooth: HCI UART driver ver 2.2
  442. <6>[ 1.504135] Bluetooth: HCI H4 protocol initialized
  443. <6>[ 1.504166] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  444. <6>[ 1.504745] cpuidle: using governor ladder
  445. <6>[ 1.504776] cpuidle: using governor menu
  446. <6>[ 1.505112] mmc0: mci-version: 18
  447. <6>[ 1.506851] mmc0: bam physical base=0x12402000
  448. <6>[ 1.506851] mmc0: bam virtual base=0xe58c4000
  449. <6>[ 1.506882] mmc0: BAM device registered. bam_handle=0xe3919a00
  450. <6>[ 1.507065] sps:REVISION of BAM 0xe58c4000 is 0x5.
  451. <6>[ 1.507279] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  452. <6>[ 1.507309] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  453. <3>[ 1.507340] mmc0: No card detect facilities available
  454. <6>[ 1.511704] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  455. <6>[ 1.511735] mmc0: 8 bit data mode enabled
  456. <6>[ 1.511735] mmc0: 4 bit data mode disabled
  457. <6>[ 1.511735] mmc0: polling status mode disabled
  458. <6>[ 1.511765] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  459. <6>[ 1.511765] mmc0: Slot eject status = 0
  460. <6>[ 1.511765] mmc0: Power save feature enable = 1
  461. <6>[ 1.511796] mmc0: SPS-BAM data transfer mode available
  462. <6>[ 1.511887] mmc1: mci-version: 18
  463. <6>[ 1.514176] mmc1: bam physical base=0x12182000
  464. <6>[ 1.514176] mmc1: bam virtual base=0xe58d0000
  465. <6>[ 1.514207] mmc1: BAM device registered. bam_handle=0xe391e000
  466. <6>[ 1.514298] sps:REVISION of BAM 0xe58d0000 is 0x5.
  467. <6>[ 1.514481] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
  468. <6>[ 1.514481] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
  469. <7>[ 1.514787] msmsdcc_probe : Change sysfs Card Detect
  470. <6>[ 1.515641] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,657 dma -1 dmacrcri -1
  471. <6>[ 1.515672] mmc1: 8 bit data mode disabled
  472. <6>[ 1.515672] mmc1: 4 bit data mode enabled
  473. <6>[ 1.515672] mmc1: polling status mode disabled
  474. <6>[ 1.515702] mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
  475. <6>[ 1.515702] mmc1: Slot eject status = 1
  476. <6>[ 1.515702] mmc1: Power save feature enable = 1
  477. <6>[ 1.515733] mmc1: SPS-BAM data transfer mode available
  478. <6>[ 1.515946] mmc2: mci-version: 18
  479. <6>[ 1.516954] mmc2: bam physical base=0x121c2000
  480. <6>[ 1.516954] mmc2: bam virtual base=0xe58d8000
  481. <6>[ 1.516954] mmc2: BAM device registered. bam_handle=0xe391e800
  482. <6>[ 1.517137] ulpi_init: ULPI 0x44:0x3f:0x3c:0x13
  483. <6>[ 1.517167] ulpi_init: ULPI 0x44:0x3f:0x3c:0x13
  484. <6>[ 1.517167] msm_otg_init_sm, smb347s
  485. <6>[ 1.517198] msm_otg msm_otg: OTG_STATE_B_IDLE state
  486. <6>[ 1.517198] msm_otg msm_otg: gadget on
  487. <6>[ 1.518113] sps:REVISION of BAM 0xe58d8000 is 0x5.
  488. <6>[ 1.518388] mmc2: Qualcomm MSM SDCC-BAM at 0x00000000121c2000 irq 127
  489. <6>[ 1.518388] mmc2: Qualcomm MSM SDCC-DML at 0x00000000121c0800
  490. <6>[ 1.518449] brcm_wifi_status_register: callback is c05efb8c, devid is e40db380
  491. <6>[ 1.520494] msm_otg_start_peripheral disable_peripheral: 0
  492. <6>[ 1.520494] usb:: ci13xxx_vbus_session,2791
  493. <6>[ 1.520494] usb:: ci13xxx_vbus_session gadget_ready:1, is_active:1
  494. <6>[ 1.520524] usb:: hw_device_reset
  495. <6>[ 1.520555] usb:: ci13xxx_vbus_session softconnect: 0
  496. <6>[ 1.520647] mmc2: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma -1 dmacrcri -1
  497. <6>[ 1.520647] mmc2: 8 bit data mode disabled
  498. <6>[ 1.520647] mmc2: 4 bit data mode enabled
  499. <6>[ 1.520677] mmc2: polling status mode disabled
  500. <6>[ 1.520677] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  501. <6>[ 1.520677] mmc2: Slot eject status = 0
  502. <6>[ 1.520708] mmc2: Power save feature enable = 1
  503. <6>[ 1.520769] mmc2: SPS-BAM data transfer mode available
  504. <3>[ 1.521135] aat1290a_led_probe : Probe
  505. <6>[ 1.526598] usbcore: registered new interface driver usbhid
  506. <6>[ 1.526598] usbhid: USB HID core driver
  507. <6>[ 1.527208] logger: created 512K log 'log_main'
  508. <6>[ 1.527361] logger: created 256K log 'log_events'
  509. <6>[ 1.527483] logger: created 2048K log 'log_radio'
  510. <6>[ 1.527636] logger: created 256K log 'log_system'
  511. <6>[ 1.527636] sec_getlog_supply_loggerinfo: 0xc0e24ccc 0xc0ea4ccc 0xc10a4ccc 0xc10e4ccc
  512. <6>[ 1.528704] usbcore: registered new interface driver snd-usb-audio
  513. <6>[ 1.530718] msm_pcm_probe: dev name msm-voip-dsp
  514. <6>[ 1.531359] msm_pcm_probe: dev name msm-pcm-dsp
  515. <6>[ 1.531573] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  516. <6>[ 1.532214] msm_compr_probe: dev name msm-compr-dsp
  517. <6>[ 1.532427] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  518. <3>[ 1.532519] msm_soc_platform_init
  519. <6>[ 1.535052] msm_afe_probe: dev name msm-pcm-afe
  520. <3>[ 1.549427] msm_afe_afe_probe
  521. <6>[ 1.630245] mmc0: new high speed MMC card at address 0001
  522. <6>[ 1.630642] mmcblk0: mmc0:0001 MAG4FB 14.6 GiB
  523. <6>[ 1.630856] mmcblk0boot0: mmc0:0001 MAG4FB partition 1 2.00 MiB
  524. <6>[ 1.631130] mmcblk0boot1: mmc0:0001 MAG4FB partition 2 2.00 MiB
  525. <4>[ 1.633908] Alternate GPT is invalid, using primary GPT.
  526. <6>[ 1.634030] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23
  527. <6>[ 1.638760] mmcblk0boot1: unknown partition table
  528. <6>[ 1.640714] mmcblk0boot0: unknown partition table
  529. <6>[ 1.654661] asoc: null-codec-dai <-> MultiMedia1 mapping ok
  530. <6>[ 1.659026] asoc: null-codec-dai <-> MultiMedia2 mapping ok
  531. <6>[ 1.663329] asoc: null-codec-dai <-> CS-VOICE mapping ok
  532. <6>[ 1.669952] asoc: null-codec-dai <-> VoIP mapping ok
  533. <6>[ 1.673798] asoc: null-codec-dai <-> MultiMedia3 mapping ok
  534. <6>[ 1.677704] asoc: null-codec-dai <-> SLIMBUS0_HOSTLESS mapping ok
  535. <6>[ 1.681611] asoc: null-codec-dai <-> INT_FM_HOSTLESS mapping ok
  536. <3>[ 1.685426] msm_asoc_pcm_new
  537. <6>[ 1.687349] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  538. <3>[ 1.691194] msm_asoc_pcm_new
  539. <6>[ 1.693148] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  540. <6>[ 1.696993] asoc: null-codec-dai <-> MultiMedia4 mapping ok
  541. <6>[ 1.700900] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  542. <6>[ 1.704715] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  543. <6>[ 1.708591] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  544. <6>[ 1.712406] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  545. <6>[ 1.716252] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  546. <6>[ 1.720097] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  547. <6>[ 1.723943] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  548. <6>[ 1.727788] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  549. <6>[ 1.731634] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  550. <6>[ 1.735479] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
  551. <6>[ 1.739356] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
  552. <6>[ 1.743171] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
  553. <4>[ 1.747688] tabla_codec tabla_codec: ASoC: Failed to create Digital Mic1 debugfs file
  554. <6>[ 1.752662] asoc: tabla_i2s_rx1 <-> msm-dai-q6.0 mapping ok
  555. <6>[ 1.757576] asoc: tabla_i2s_tx1 <-> msm-dai-q6.1 mapping ok
  556. <6>[ 1.758278] input: msm8960-snd-card Volumedown Jack as /devices/platform/soc-audio.0/sound/card0/input9
  557. <6>[ 1.758553] input: msm8960-snd-card Volumeup Jack as /devices/platform/soc-audio.0/sound/card0/input10
  558. <6>[ 1.758828] input: msm8960-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input11
  559. <6>[ 1.759072] input: msm8960-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input12
  560. <6>[ 1.763283] ALSA device list:
  561. <6>[ 1.763283] #0: msm8960-snd-card
  562. <6>[ 1.763406] GACT probability NOT on
  563. <6>[ 1.763406] Mirror/redirect action on
  564. <6>[ 1.763436] u32 classifier
  565. <6>[ 1.763436] Actions configured
  566. <6>[ 1.763436] Netfilter messages via NETLINK v0.30.
  567. <6>[ 1.763497] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  568. <6>[ 1.763955] ctnetlink v0.93: registering with nfnetlink.
  569. <6>[ 1.764016] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  570. <6>[ 1.764016] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  571. <6>[ 1.764474] xt_time: kernel timezone is -0000
  572. <6>[ 1.764657] ip_tables: (C) 2000-2006 Netfilter Core Team
  573. <6>[ 1.764840] arp_tables: (C) 2002 David S. Miller
  574. <6>[ 1.764871] TCP cubic registered
  575. <6>[ 1.764901] Initializing XFRM netlink socket
  576. <6>[ 1.765450] NET: Registered protocol family 10
  577. <6>[ 1.766641] Mobile IPv6
  578. <6>[ 1.766702] ip6_tables: (C) 2000-2006 Netfilter Core Team
  579. <6>[ 1.766824] IPv6 over IPv4 tunneling driver
  580. <6>[ 1.767282] NET: Registered protocol family 17
  581. <6>[ 1.767312] NET: Registered protocol family 15
  582. <6>[ 1.767526] Bluetooth: RFCOMM TTY layer initialized
  583. <6>[ 1.767526] Bluetooth: RFCOMM socket layer initialized
  584. <6>[ 1.767556] Bluetooth: RFCOMM ver 1.11
  585. <6>[ 1.767556] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  586. <6>[ 1.767556] Bluetooth: BNEP filters: protocol multicast
  587. <6>[ 1.767587] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  588. <5>[ 1.767709] Registering the dns_resolver key type
  589. <6>[ 1.767739] VFP support v0.3: implementor 51 architecture 64 part 4d variant 1 rev 0
  590. <5>[ 1.767801] Registering SWP/SWPB emulation handler
  591. <6>[ 1.777842] clock_late_init() disabled 199 unused clocks
  592. <6>[ 1.785075] msm_watchdog_probe: pet_time=10000 bark_time=20000
  593. <6>[ 1.785197] WDOG handled by TZ:dump @0xe3bcb000 PA:aa2cb000
  594. <6>[ 1.785380] MSM Watchdog Initialized
  595. <3>[ 1.791576] set_dload_mode <1> ( c0018294 )
  596. <6>[ 1.794994] sec_debug_subsys_init: msm_shared_ram_phys=80000000 SMEM_ID_VENDOR2=136 size=7772
  597. <6>[ 1.795025] sec_debug_subsys_init: krait(80004cd8) rpm(800051b8) modem(80005a2c) dsps(800062a0)
  598. <6>[ 1.796978] cypress_power_on is finished.
  599. <6>[ 1.797161] input: sec_touchkey as /devices/platform/i2c-gpio.16/i2c-16/16-0020/input/input13
  600. <7>[ 1.797772] Registered led device: button-backlight
  601. <3>[ 1.827834] cypress_touchkey 16-0020: Touchkey FW Version: 0x06
  602. <3>[ 1.832839] cypress_touchkey 16-0020: Touchkey FW Version: 0x06, system_rev: 10
  603. <3>[ 1.840073] cypress_touchkey 16-0020: [TouchKey] FW update does not need!
  604. <7>[ 1.848924] [TouchKey] data[0]=50 data[1]=6 data[2]=5 data[3]=1
  605. <7>[ 1.908530] [Touchkey] autocal Enabled
  606. <6>[ 1.908805] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-03-06 11:19:31 UTC (5570371)
  607. <6>[ 1.909018] pm8921_charger_probe: driver Loading SKIP!!!
  608. <4>[ 1.909018] pm8921-charger: probe of pm8921-charger failed with error -22
  609. <6>[ 1.909323] sec_bat_probe: SEC Battery Driver Loading
  610. <6>[ 1.909323] [battery] enable Vref_batt_therm
  611. <6>[ 1.909323] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  612. <6>[ 1.909751] sec_bat_probe: initial charging_status = 1
  613. <6>[ 1.912467] cable type (0) -----
  614. <6>[ 1.913932] max17040_rcomp_update : temp(30), rcomp 0x851c -> 0x6d1c (109)
  615. <6>[ 1.914054] tspdrv: tspdrv_probe.
  616. <7>[ 1.914451] ImmVibeSPI_ForceOut_Initialize.
  617. <7>[ 1.914573] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
  618. <6>[ 1.915214] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  619. <6>[ 1.916068] Freeing init memory: 992K
  620. <3>[ 1.920067] init: /init.qcom.rc: 516: invalid command '/system/bin/log'
  621. <3>[ 1.925866] init: /init.qcom.rc: 595: ignored duplicate definition of service 'ril-daemon'
  622. <3>[ 1.935693] init: could not import file '/system/etc/init.local.rc' from '/init.rc'
  623. <4>[ 1.943048] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  624. <3>[ 2.247184] init: could not open /dev/keychord
  625. <6>[ 2.306821] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
  626. <6>[ 2.306912] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/efs
  627. <6>[ 2.365084] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: barrier=1
  628. <6>[ 2.365176] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
  629. <6>[ 2.386143] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: barrier=1,discard,noauto_da_alloc,journal_async_commit
  630. <6>[ 2.393651] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: barrier=1
  631. <6>[ 2.400030] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=1
  632. <6>[ 2.417518] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  633. <6>[ 2.417549] sec_bat_monitor_work: battery check is present (1 time )
  634. <6>[ 2.419166] [battery] level(43), vcell(3863750), therm(303)
  635. <6>[ 2.419197] [battery] cable_type(7), chg_status(1), health(1)
  636. <6>[ 2.419197] [battery] timeout_chgstp(0), chg_enabled(0), rechg_status(0)
  637. <6>[ 2.874072] EXT4-fs (mmcblk0p14): re-mounted. Opts: barrier=1
  638. <6>[ 3.257927] sec_jack:sec_jack_det_irq_handler : ready = 1.
  639. <6>[ 3.257958] sec_jack: ear micbias off
  640. <6>[ 3.435800] EXT4-fs (mmcblk0p14): re-mounted. Opts: barrier=1
  641. <6>[ 3.557118] warning: `qrngd' uses 32-bit capabilities (legacy support in use)
  642. <7>[ 3.558919] #### init init
  643. <3>[ 3.566030] init: cannot find '/system/bin/ATFWD-daemon', disabling 'atfwd'
  644. <3>[ 3.587578] init: cannot find '/system/bin/qseecomd', disabling 'qseecomd'
  645. <3>[ 3.617549] init: cannot find '/system/bin/time_daemon', disabling 'time_daemon'
  646. <7>[ 3.638852] usb: enable_store enabled=0, !dev->enabled=1
  647. <6>[ 3.638852] usb:: ci13xxx_pullup is_active: 0
  648. <6>[ 3.638882] usb:: hw_device_state dma: 0
  649. <6>[ 3.639157] usb:: hw_device_state hw_read(CAP_USBINTR, ~0): 0
  650. <6>[ 3.639188] usb:: hw_device_state hw_read(CAP_USBCMD, USBCMD_RS): 0
  651. <7>[ 3.639584] usb: functions_store buff=mtp,acm,adb
  652. <7>[ 3.640836] usb: android_enable_function name=mtp
  653. <7>[ 3.640836] usb: android_enable_function name=acm
  654. <7>[ 3.640866] usb: android_enable_function name=adb
  655. <7>[ 3.641721] usb: enable_store enabled=1, !dev->enabled=1
  656. <7>[ 3.641751] usb: enable_store f:mtp
  657. <7>[ 3.641751] usb: enable_store f:acm
  658. <7>[ 3.641751] usb: acm is enabled. (bcdDevice=0x400)
  659. <7>[ 3.641782] usb: enable_store f:adb
  660. <7>[ 3.641782] usb: enable_store vendor=4e8,product=6860,bcdDevice=400
  661. <7>[ 3.641782] ,Class=0,SubClass=0,Protocol=0
  662. <7>[ 3.641812] usb: enable_store next cmd : usb_add_config
  663. <3>[ 3.644224] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
  664. <6>[ 3.652891] a2220_bootup_init:a2220_bootup_init 7
  665. <6>[ 3.659667] adb_open
  666. <7>[ 3.659667] usb: android_bind_enabled_functions f:mtp
  667. <6>[ 3.659697] mtp_bind_config
  668. <7>[ 3.659697] usb: usb_string_id cdev(0xe4068100)->next_string_id=5
  669. <7>[ 3.659789] usb: android_bind_enabled_functions f:acm
  670. <7>[ 3.659789] usb: usb_string_id cdev(0xe4068100)->next_string_id=6
  671. <7>[ 3.659819] usb: usb_string_id cdev(0xe4068100)->next_string_id=7
  672. <7>[ 3.659819] usb: usb_string_id cdev(0xe4068100)->next_string_id=8
  673. <6>[ 3.659850] DUN is registerd
  674. <7>[ 3.659850] usb: android_bind_enabled_functions f:adb
  675. <6>[ 3.659850] adb_bind_config
  676. <6>[ 3.659911] usb:: ci13xxx_pullup is_active: 1
  677. <6>[ 3.659911] usb:: hw_device_state dma: aa769000
  678. <6>[ 3.659942] usb:: hw_device_state hw_read(CAP_ENDPTLISTADDR, ~0): aa769000
  679. <6>[ 3.659942] usb:: hw_device_state hw_read(CAP_USBINTR, ~0): 147
  680. <6>[ 3.659972] usb:: hw_device_state hw_read(CAP_USBCMD, USBCMD_RS): 1
  681. <6>[ 3.679444] a2220_bootup_init:firmware loaded successfully
  682. <3>[ 3.701449] init: no such service 'location_mq'
  683. <3>[ 3.715885] init: no such service 'xtwifi_inet'
  684. <3>[ 3.730535] init: no such service 'xtwifi_client'
  685. <7>[ 3.741980] load_image: load q6.mdt image
  686. <6>[ 3.788127] fsa9485 11-0025: fsa9485_init_detect
  687. <6>[ 3.789043] fsa9485 11-0025: dev1: 0x4, dev2: 0x0
  688. <6>[ 3.789043] fsa9485 11-0025: usb connect path
  689. <3>[ 3.798138] init: sys_prop: permission denied uid:1002 name:wlan.poke_helper.pid
  690. <6>[ 3.808667] fsa9485_usb_cb attached 1
  691. <6>[ 3.808667] fsa9485_usb_cb set vbus state
  692. <6>[ 3.808667] msm_otg msm_otg: msm_otg_set_vbus_state(1): on working
  693. <6>[ 3.808698] sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
  694. <6>[ 3.809674] smb347_set_charging_current : 500
  695. <6>[ 3.812665] [battery] INPUT_USBIN ----------
  696. <6>[ 3.812696] smb347_charger_function_conrol : reg (0x1) = 0x21
  697. <6>[ 3.817030] smb347_inok_work_func : skip dcin type.
  698. <6>[ 3.824507] smb347_set_top_off : => reg (0x0) = 0x7b
  699. <6>[ 3.828078] max17040_rcomp_update : temp(30), rcomp 0x6d1c -> 0x851c (133)
  700. <6>[ 3.829238] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  701. <3>[ 3.868976] init: cannot find '/system/bin/sensors.qcom', disabling 'sensors'
  702. <6>[ 3.887990] execute_cmdmsg : execute_cmdmsg :: 80 0 0 0
  703. <6>[ 3.888173] execute_cmdmsg + 1
  704. <6>[ 3.888203] execute_cmdmsg + 2
  705. <6>[ 3.888478] execute_cmdmsg + 3
  706. <6>[ 3.888509] execute_cmdmsg + 4
  707. <6>[ 3.888509] got ACK
  708. <6>[ 3.888509] execute_cmdmsg - finish
  709. <6>[ 3.888539] a2220_bootup_init:a2220_bootup_init 8
  710. <6>[ 3.888539] execute_cmdmsg : execute_cmdmsg :: 80 52 0 48
  711. <6>[ 3.888722] execute_cmdmsg + 1
  712. <6>[ 3.888722] execute_cmdmsg + 2
  713. <6>[ 3.888905] execute_cmdmsg + 3
  714. <6>[ 3.888905] execute_cmdmsg + 4
  715. <6>[ 3.888905] got ACK
  716. <6>[ 3.888905] execute_cmdmsg - finish
  717. <6>[ 3.888936] execute_cmdmsg : execute_cmdmsg :: 80 52 0 5c
  718. <6>[ 3.889851] msm_thermal: enabled = 0
  719. <6>[ 3.892598] execute_cmdmsg + 1
  720. <6>[ 3.892629] execute_cmdmsg + 2
  721. <6>[ 3.892781] execute_cmdmsg + 3
  722. <6>[ 3.892781] execute_cmdmsg + 4
  723. <6>[ 3.892812] got ACK
  724. <6>[ 3.892812] execute_cmdmsg - finish
  725. <6>[ 3.892812] execute_cmdmsg : execute_cmdmsg :: 80 10 0 1
  726. <6>[ 3.893331] execute_cmdmsg + 1
  727. <6>[ 3.893331] execute_cmdmsg : ...go to suspend first
  728. <6>[ 3.893331] a2220_bootup_init : a2220_bootup_init - finish
  729. <3>[ 3.929955] init: no such service 'battery_monitor'
  730. <6>[ 3.965267] usb:: isr_reset_handler udc: c8b6e000
  731. <7>[ 3.965450] usb: composite_disconnect
  732. <7>[ 3.965450] usb: android_disconnect cable state (1)
  733. <7>[ 3.965511] usb: android_work config= (null),connected=0,sw_connected=0
  734. <7>[ 3.965542] usb: android_work did not send uevent (0 0 (null))
  735. <6>[ 4.180985]
  736. <6>[ 4.180985] Trip point triggered by current temperature (43 degrees) measured by Temperature-Sensor 0
  737. <6>[ 4.338074] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  738. <6>[ 4.338104] sec_bat_monitor_work: battery check is present (1 time )
  739. <6>[ 4.339661] [battery] level(43), vcell(3825000), therm(303)
  740. <6>[ 4.339661] [battery] cable_type(1), chg_status(1), health(1)
  741. <6>[ 4.339691] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
  742. <6>[ 4.591240] usb:: isr_reset_handler udc: c8b6e000
  743. <7>[ 4.591728] usb: composite_disconnect
  744. <7>[ 4.591759] usb: android_disconnect cable state (1)
  745. <7>[ 4.592461] usb: android_work config= (null),connected=0,sw_connected=0
  746. <7>[ 4.592461] usb: android_work did not send uevent (0 0 (null))
  747. <7>[ 4.727971] usb: GET_DES
  748. <7>[ 4.728124] usb: android_work config= (null),connected=1,sw_connected=0
  749. <7>[ 4.728185] usb: android_work sent uevent USB_STATE=CONNECTED
  750. <7>[ 4.730932] usb: GET_DES
  751. <7>[ 4.737341] usb: set_config_number single config
  752. <7>[ 4.737341] usb: set_interface_count next_interface_id=4
  753. <7>[ 4.737799] usb: set_config_number single config
  754. <7>[ 4.737799] usb: set_interface_count next_interface_id=4
  755. <6>[ 4.738257] android_usb gadget: high speed config #1: android
  756. <7>[ 4.738409] usb: SET_CON
  757. <7>[ 4.738623] usb: android_work config=c0ca3fb8,connected=1,sw_connected=1
  758. <7>[ 4.738837] usb: android_work sent uevent USB_STATE=CONFIGURED
  759. <6>[ 4.885426] pil_qdsp6v4 pil_qdsp6v4.0: brought out of reset
  760. <3>[ 4.885457] LOAD IMAGE q6, ret 0
  761. <7>[ 4.888112] load_image: load modem_fw.mdt image
  762. <6>[ 4.905692] diag: incomplete pkt on LPASS CNTL ch
  763. <6>[ 4.926354] diag: incomplete pkt on LPASS CNTL ch
  764. <6>[ 4.926720] apr_tal:Q6 Is Up
  765. <6>[ 4.926995] diag: event mask not set yet, so no update
  766. <6>[ 4.927178] diag: incomplete pkt on LPASS CNTL ch
  767. <3>[ 5.299954] store_afe_cal: offset 1093180928 is > mem_len 344064
  768. <6>[ 5.325835] msm_pcm_routing_process_audio: reg 0 val 0 set 1
  769. <6>[ 5.326049] msm8960_i2s_startup
  770. <6>[ 5.327788] apr_tal: SMD_EVENT_OPEN
  771. <6>[ 5.333160] msm8660_i2s_hw_params Codec Clock c0c37614 Rx Bit Clock c0c37580
  772. <6>[ 5.333679] msm_pcm_routing_hw_params : channel = 2
  773. <6>[ 5.368564] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 96000000
  774. <6>[ 5.371707] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 4 to 2
  775. <6>[ 5.423103] pil_qdsp6v4 pil_qdsp6v4.1: brought out of reset
  776. <3>[ 5.423134] LOAD IMAGE modem_fw, ret 0
  777. <7>[ 5.425942] load_image: load modem.mdt image
  778. <6>[ 6.768228] msmsdcc_runtime_suspend: Enter WIFI suspend
  779. <6>[ 8.500442] pil_qdsp6v4 pil_qdsp6v4.2: brought out of reset
  780. <3>[ 8.500473] LOAD IMAGE modem, ret 0
  781. <3>[ 8.503128] smd_pkt_open: DATA5_CNTL open failed -19
  782. <3>[ 8.629787] accel_open_calibration: Can't open calibration file
  783. <6>[ 8.636899] Sensors unset: 7fff
  784. <6>[ 8.898367] light_enable_store,new_value=1
  785. <3>[ 9.010773] smd_pkt_open: DATA5_CNTL open failed -19
  786. <6>[ 9.268274] proximity_enable_store,new_value=1, prox_cal 0
  787. <3>[ 9.282740] Notify: smsm init
  788. <6>[ 9.282771] _smem_log_init: no static log or log_idx allocated
  789. <6>[ 9.282771] _smem_log_init: no power log or log_idx allocated
  790. <6>[ 9.371097] light_enable_store,new_value=0
  791. <6>[ 9.372104] proximity_enable_store,new_value=0, prox_cal 0
  792. <3>[ 9.520524] smd_pkt_open: DATA5_CNTL open failed -19
  793. <3>[ 10.028506] smd_pkt_open: DATA5_CNTL open failed -19
  794. <6>[ 10.476087] msm8960_i2s_shutdown Codec Clock c0c37614 Rx Bit Clock c0c37580
  795. <6>[ 10.476148] msm_pcm_routing_close : be_id = 0
  796. <6>[ 10.497634] msm_pcm_routing_process_audio: reg 0 val 0 set 0
  797. <3>[ 10.531756] smd_pkt_open: DATA5_CNTL open failed -19
  798. <6>[ 10.615016] diag: incomplete pkt on Modem CNTL ch
  799. <6>[ 10.635952] diag: incomplete pkt on Modem CNTL ch
  800. <6>[ 10.635952] diag: incomplete pkt on Modem CNTL ch
  801. <6>[ 10.636593] diag: event mask not set yet, so no update
  802. <6>[ 10.726934] apr_tal:Modem Is Up
  803. <3>[ 11.034457] smd_pkt_open: DATA5_CNTL open failed -19
  804. <6>[ 11.452220] sps:REVISION of BAM 0xe58fc000 is 0x5.
  805. <3>[ 11.537372] smd_pkt_open: DATA5_CNTL open failed -19
  806. <3>[ 12.042789] smd_pkt_open: DATA5_CNTL open failed -19
  807. <3>[ 12.550312] smd_pkt_open: DATA5_CNTL open failed -19
  808. <3>[ 13.058049] smd_pkt_open: DATA5_CNTL open failed -19
  809. <3>[ 13.569204] smd_pkt_open: DATA5_CNTL open failed -19
  810. <3>[ 14.079261] smd_pkt_open: DATA5_CNTL open failed -19
  811. <3>[ 14.198565] handle_bam_mux_cmd: dropping invalid LCID 10 reserved 0 cmd 4 pad 0 ch 10 len 0
  812. <3>[ 14.199755] handle_bam_mux_cmd: dropping invalid LCID 11 reserved 0 cmd 4 pad 0 ch 11 len 0
  813. <7>[ 14.274011] led_blink input =0x000000 0 0
  814. <7>[ 14.274011] , size=13
  815. <4>[ 14.274408] [LED] USER : R:0,G:0,B:0
  816. <7>[ 14.277430] led_blink input =0x000000 0 0
  817. <7>[ 14.277430] , size=13
  818. <4>[ 14.278162] [LED] USER : R:0,G:0,B:0
  819. <7>[ 14.279078] tspdrv: Enable time = 0 msec
  820. <6>[ 14.290920] bl_level:255,cd:23:Candela:250 aid_change:0
  821. <6>[ 14.343934] [BT] Bluetooth Power On.
  822. <7>[ 14.745338] usb: state_show buf=CONFIGURED
  823. <6>[ 14.746223] acc_open
  824. <6>[ 14.746223] acc_release
  825. <6>[ 14.760720] [BT] wake_peer is registered.
  826. <7>[ 14.881153] tspdrv: Enable time = 0 msec
  827. <7>[ 14.884053] tspdrv: Enable time = 1 msec
  828. <6>[ 14.884083] tspdrv: ENABLE
  829. <7>[ 14.884114] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
  830. <7>[ 14.884632] tspdrv: Enable time = 0 msec
  831. <7>[ 14.884694] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
  832. <6>[ 15.793071] mtp_open
  833. <6>[ 16.310941] pn544_dev_ioctl power on, irq=1
  834. <6>[ 16.321043] pn544_dev_ioctl power off, irq=1
  835. <6>[ 16.331939] pn544_dev_ioctl power on, irq=1
  836. <6>[ 18.848039] [BT] going to sleep...
  837. <6>[ 19.105081] alarm_set_rtc: Failed to set RTC, time will be lost on reboot
  838. <3>[ 19.513016] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
  839. <3>[ 19.536792] init: no such service 'qosmgrd'
  840. <6>[ 19.924675] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 2 to 1
  841. <3>[ 23.330993] NOHZ: local_softirq_pending 08
  842. <3>[ 23.672089] mdnie [mdnie set] in scenario_store, input value = 0
  843. <3>[ 23.672089] mdnie [mdnie set] mDNIe_Set_Mode
  844. <3>[ 23.672089] mdnie cmap->len 256
  845. <3>[ 23.672180] mdnie [mDNIe] mDNIe_Set_Mode : Current_mDNIe_mode (0)
  846. <3>[ 23.672211] mdnie [mDNIe] Sharpness value : (0)
  847. <3>[ 23.675568] mdnie [mdnie set]negative_store, input value = 0
  848. <6>[ 23.675598] [negative] value = 0
  849. <3>[ 23.675598] mdnie [mdnie set] mDNIe_Set_mDNIe_Mode = 0
  850. <3>[ 23.675598] mdnie [mdnie set] mDNIe_Set_Mode
  851. <3>[ 23.675629] mdnie cmap->len 256
  852. <3>[ 23.675690] mdnie [mDNIe] mDNIe_Set_Mode : Current_mDNIe_mode (0)
  853. <3>[ 23.675721] mdnie [mDNIe] Sharpness value : (0)
  854. <3>[ 27.160506] NOHZ: local_softirq_pending 08
  855. <3>[ 28.632778] NOHZ: local_softirq_pending 08
  856. <3>[ 28.864550] NOHZ: local_softirq_pending 08
  857. <7>[ 29.768716] rmnet0: no IPv6 routers present
  858. <6>[ 31.509812] max17040_work : VCELL:3735mV, AVGVCELL:3828mV
  859. <6>[ 31.509812] max17040_work : Raw SOC:4362%, SOC:43%
  860. <6>[ 31.510788] max17040_work : CONFIG:0x1c85, RATE:0x6900
  861. <6>[ 31.511277] max17040_work : STATUS:0xff01, temperature:30
  862. <6>[ 31.518419] max17040 13-0036: c0bah,4257h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,6900h,067dh,ff01h,ffffh,
  863. <3>[ 33.295711] NOHZ: local_softirq_pending 08
  864. <3>[ 33.849565] NOHZ: local_softirq_pending 08
  865. <3>[ 33.863634] NOHZ: local_softirq_pending 08
  866. <3>[ 33.886159] NOHZ: local_softirq_pending 08
  867. <3>[ 33.890676] NOHZ: local_softirq_pending 08
  868. <3>[ 33.929406] NOHZ: local_softirq_pending 08
  869. <6>[ 34.342652] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  870. <6>[ 34.848802] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  871. <6>[ 34.848832] sec_bat_monitor_work: battery check is present (1 time )
  872. <6>[ 34.850328] [battery] level(43), vcell(3775000), therm(303)
  873. <6>[ 34.850328] [battery] cable_type(1), chg_status(1), health(1)
  874. <6>[ 34.850358] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
  875. <6>[ 61.590935] max17040_work : VCELL:3870mV, AVGVCELL:3807mV
  876. <6>[ 61.590965] max17040_work : Raw SOC:4362%, SOC:43%
  877. <6>[ 61.593193] max17040_work : CONFIG:0x1c85, RATE:0x6900
  878. <6>[ 61.594231] max17040_work : STATUS:0xff01, temperature:30
  879. <6>[ 61.609247] max17040 13-0036: 80c1h,4257h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,6900h,067dh,ff01h,ffffh,
  880. <6>[ 72.455241] bl_level:249,cd:22:Candela:240 aid_change:0
  881. <6>[ 72.537005] bl_level:237,cd:21:Candela:230 aid_change:0
  882. <6>[ 72.599755] bl_level:226,cd:20:Candela:220 aid_change:0
  883. <6>[ 72.650206] bl_level:217,cd:19:Candela:210 aid_change:0
  884. <6>[ 72.699771] bl_level:208,cd:18:Candela:200 aid_change:0
  885. <6>[ 72.749885] bl_level:199,cd:17:Candela:190 aid_change:0
  886. <6>[ 72.813001] bl_level:188,cd:16:Candela:180 aid_change:1
  887. <6>[ 72.873370] bl_level:177,cd:15:Candela:170 aid_change:0
  888. <6>[ 72.906394] bl_level:169,cd:14:Candela:160 aid_change:0
  889. <6>[ 72.983580] bl_level:158,cd:13:Candela:150 aid_change:0
  890. <6>[ 73.031344] bl_level:149,cd:12:Candela:140 aid_change:0
  891. <6>[ 73.100106] bl_level:137,cd:11:Candela:130 aid_change:0
  892. <6>[ 73.143598] bl_level:129,cd:10:Candela:120 aid_change:0
  893. <6>[ 73.200640] bl_level:119,cd:9:Candela:110 aid_change:0
  894. <6>[ 73.265008] bl_level:107,cd:8:Candela:100 aid_change:1
  895. <6>[ 73.314665] bl_level:98,cd:7:Candela:90 aid_change:1
  896. <6>[ 73.381809] bl_level:86,cd:6:Candela:80 aid_change:1
  897. <6>[ 73.432717] bl_level:77,cd:5:Candela:70 aid_change:1
  898. <6>[ 73.479993] bl_level:69,cd:4:Candela:60 aid_change:1
  899. <6>[ 73.547260] bl_level:57,cd:3:Candela:50 aid_change:1
  900. <6>[ 73.594628] bl_level:48,cd:2:Candela:40 aid_change:1
  901. <6>[ 73.655333] bl_level:37,cd:1:Candela:30 aid_change:1
  902. <6>[ 73.763161] bl_level:20,cd:0:Candela:20 aid_change:1
  903. <6>[ 79.426857] request_suspend_state: sleep (3->3) at 79428177279 (2012-09-28 02:41:16.423209219 UTC)
  904. <6>[ 79.426888] early_suspend: call handlers
  905. <6>[ 79.431680] cypress_power_off is finished.
  906. <5>[ 79.431680] mms_ts 3-0048: mms_ts_suspend: users=1
  907. <7>[ 79.431710] [TSP] release_all_fingers
  908. <6>[ 79.432229] tsp 1.8V off is finished.
  909. <6>[ 79.432626] tsp 3.3V off is finished.
  910. <6>[ 79.998626] mipi_samsung_disp_early_suspend, disable blt mode
  911. <6>[ 79.998626] set_esd_disable is called
  912. <3>[ 80.069037] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  913. <6>[ 80.074378] mipi_dsi_ahb_ctrl: ahb clks already ON
  914. <6>[ 80.074408] mipi_dsi_clk_enable: mipi_dsi_clks already ON
  915. <6>[ 80.074439] set_esd_disable is called
  916. <3>[ 80.210163] dtv_pipe is not configured yet
  917. <6>[ 80.213428] [@@@@@mpu_dev_early_suspend@@@@@]
  918. <6>[ 80.213459] [mpu_early_notifier_callback] event = 3
  919. <6>[ 80.213642] Sensors unset: 7fff
  920. <6>[ 80.213917] sec_bat_early_suspend[BATT]...
  921. <6>[ 80.214008] PM: Syncing filesystems...
  922. <6>[ 80.219624] active wake lock PowerManagerService
  923. <6>[ 80.219655] active wake lock msm_otg
  924. <6>[ 80.219685] active wake lock smdcntl0, time left 85
  925. <6>[ 80.226003] sync done.
  926. <7>[ 80.337005] tspdrv: Enable time = 0 msec
  927. <6>[ 80.744208] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  928. <6>[ 81.249168] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  929. <6>[ 81.249229] sec_bat_monitor_work: battery check is present (1 time )
  930. <6>[ 81.252433] [battery] level(43), vcell(3898750), therm(305)
  931. <6>[ 81.252464] [battery] cable_type(1), chg_status(1), health(1)
  932. <6>[ 81.252495] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
  933. <6>[ 91.781168] max17040_work : VCELL:3900mV, AVGVCELL:3836mV
  934. <6>[ 91.781229] max17040_work : Raw SOC:4362%, SOC:43%
  935. <6>[ 91.783274] max17040_work : CONFIG:0x1c85, RATE:0x4f00
  936. <6>[ 91.784312] max17040_work : STATUS:0xff01, temperature:30
  937. <6>[ 91.799298] max17040 13-0036: 00c3h,4257h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,4f00h,067dh,ff01h,ffffh,
  938. <6>[ 111.579337] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  939. <6>[ 112.088905] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  940. <6>[ 112.088966] sec_bat_monitor_work: battery check is present (1 time )
  941. <6>[ 112.092140] [battery] level(43), vcell(3901250), therm(305)
  942. <6>[ 112.092202] [battery] cable_type(1), chg_status(1), health(1)
  943. <6>[ 112.092232] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
  944. <6>[ 122.071142] max17040_work : VCELL:3902mV, AVGVCELL:3884mV
  945. <6>[ 122.071173] max17040_work : Raw SOC:4362%, SOC:43%
  946. <6>[ 122.073248] max17040_work : CONFIG:0x1c85, RATE:0x3b00
  947. <6>[ 122.074286] max17040_work : STATUS:0xff01, temperature:30
  948. <6>[ 122.089302] max17040 13-0036: 20c3h,4257h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,3b00h,067dh,ff01h,ffffh,
  949. <3>[ 141.472089] init: sys_prop: permission denied uid:2000 name:sys.media.vdec.sw
  950. <6>[ 142.098794] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  951. <6>[ 142.608789] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  952. <6>[ 142.608820] sec_bat_monitor_work: battery check is present (1 time )
  953. <6>[ 142.610285] [battery] level(43), vcell(3871250), therm(305)
  954. <6>[ 142.610315] [battery] cable_type(1), chg_status(1), health(1)
  955. <6>[ 142.610315] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!