Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 2.6.27.29-CRI (builder@pld) (gcc version 4.3.3 20090211 (release) (PLD-Linux) ) #1 Sat Aug 15 18:01:33 CEST 2009
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
- BIOS-e820: 000000000fff0000 - 0000000010000000 (ACPI data)
- BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
- DMI 2.5 present.
- last_pfn = 0xfff0 max_arch_pfn = 0x100000
- kernel direct mapping tables up to fff0000 @ 7000-d000
- RAMDISK: 0fa1d000 - 0ffceabb
- 255MB LOWMEM available.
- mapped low ram: 0 - 0fff0000
- low ram: 00000000 - 0fff0000
- bootmap 00001000 - 00003000
- (7 early reservations) ==> bootmem [0000000000 - 000fff0000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0000100000 - 0000297e38] TEXT DATA BSS ==> [0000100000 - 0000297e38]
- #2 [000fa1d000 - 000ffceabb] RAMDISK ==> [000fa1d000 - 000ffceabb]
- #3 [0000298000 - 000029a000] INIT_PG_TABLE ==> [0000298000 - 000029a000]
- #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
- #5 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
- #6 [0000001000 - 0000003000] BOOTMAP ==> [0000001000 - 0000003000]
- found SMP MP-table at [c009fff0] 0009fff0
- Zone PFN ranges:
- DMA 0x00000000 -> 0x00001000
- Normal 0x00001000 -> 0x0000fff0
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000000 -> 0x0000009f
- 0: 0x00000100 -> 0x0000fff0
- On node 0 totalpages: 65423
- free_area_init_node: node 0, pgdat c024c81c, node_mem_map c1000000
- DMA zone: 3967 pages, LIFO batch:0
- Normal zone: 60944 pages, LIFO batch:15
- Intel MultiProcessor Specification v1.4
- Virtual Wire compatibility mode.
- MPTABLE: OEM ID: VBOXCPU
- MPTABLE: Product ID: VirtualBox
- MPTABLE: APIC at: 0xFEE00000
- Processor #0 (Bootup-CPU)
- I/O APIC #1 Version 17 at 0xFEC00000.
- Enabling APIC mode: Flat. Using 1 I/O APICs
- Processors: 1
- mapped APIC to ffffb000 (fee00000)
- mapped IOAPIC to ffffa000 (fec00000)
- Allocating PCI resources starting at 20000000 (gap: 10000000:effc0000)
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64911
- Kernel command line: initrd=initrd32 root=/dev/ram0 ramdisk_size=35840 init=/linuxrc cri=src=cd,media=cd BOOT_IMAGE=vmlinuz32
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- PID hash table entries: 1024 (order: 10, 4096 bytes)
- TSC: Unable to calibrate against PIT
- TSC: No reference (HPET/PMTIMER) available
- Marking TSC unstable due to could not calculate TSC khz
- Console: colour VGA+ 80x25
- console [tty0] enabled
- Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- Memory: 251528k/262080k available (1042k kernel code, 9860k reserved, 298k data, 152k init, 0k highmem)
- virtual kernel memory layout:
- fixmap : 0xfffb9000 - 0xfffff000 ( 280 kB)
- vmalloc : 0xd0800000 - 0xfffb7000 ( 759 MB)
- lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
- .init : 0xc0252000 - 0xc0278000 ( 152 kB)
- .data : 0xc0204b45 - 0xc024f3e8 ( 298 kB)
- .text : 0xc0100000 - 0xc0204b45 (1042 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- CPA: page pool initialized 1 of 1 pages preallocated
- Calibrating delay loop... 3866.62 BogoMIPS (lpj=7733248)
- Mount-cache hash table entries: 512
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 2048K
- CPU: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz stepping 02
- Checking 'hlt' instruction... OK.
- Freeing SMP alternatives: 0k freed
- ENABLING IO-APIC IRQs
- ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
- net_namespace: 440 bytes
- NET: Registered protocol family 16
- EISA bus registered
- PCI: PCI BIOS revision 2.10 entry at 0xfc080, last bus=0
- PCI: Using configuration type 1 for base access
- Linux Plug and Play Support v0.97 (c) Adam Belay
- PCI: Probing PCI hardware
- PCI: Probing PCI hardware (bus 00)
- PCI: 0000:00:01.1 reg 20 io port: [d000, d00f]
- PCI: 0000:00:02.0 reg 10 32bit mmio: [e0000000, e07fffff]
- PCI: 0000:00:03.0 reg 10 32bit mmio: [f0000000, f001ffff]
- PCI: 0000:00:03.0 reg 18 io port: [d010, d017]
- PCI: 0000:00:04.0 reg 10 io port: [d020, d03f]
- PCI: 0000:00:04.0 reg 14 32bit mmio: [f0400000, f07fffff]
- PCI: 0000:00:04.0 reg 18 32bit mmio: [f0800000, f0803fff]
- PCI: 0000:00:06.0 reg 10 32bit mmio: [f0804000, f0804fff]
- PCI: 0000:00:0b.0 reg 10 32bit mmio: [f0805000, f0805fff]
- PCI: 0000:00:15.0 reg 10 io port: [d040, d05f]
- PCI: 0000:00:15.0 reg 14 32bit mmio: [f0806000, f0806fff]
- pci 0000:00:01.0: PIIX/ICH IRQ router [8086/7000]
- PCI BIOS passed nonexistent PCI bus 0!
- PCI BIOS passed nonexistent PCI bus 0!
- PCI BIOS passed nonexistent PCI bus 0!
- PCI BIOS passed nonexistent PCI bus 0!
- PCI BIOS passed nonexistent PCI bus 0!
- bus: 00 index 0 io port: [0, ffff]
- bus: 00 index 1 mmio: [0, ffffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
- TCP: Hash tables configured (established 8192 bind 8192)
- TCP reno registered
- NET: Registered protocol family 1
- checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
- Freeing initrd memory: 5830k freed
- platform rtc_cmos: registered platform RTC device (no PNP device found)
- msgmni has been set to 503
- io scheduler noop registered (default)
- pci 0000:00:00.0: Limiting direct PCI/PCI transfers
- pci 0000:00:01.0: Activating ISA DMA hang workarounds
- pci 0000:00:02.0: Boot video device
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Real Time Clock Driver v1.12ac
- brd: module loaded
- PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- input: AT Translated Set 2 keyboard as /class/input/input0
- EISA: Probing bus 0 at eisa.0
- TCP cubic registered
- NET: Registered protocol family 17
- Using IPI Shortcut mode
- RAMDISK: Lzma image found at block 0
- VFS: Mounted root (romfs filesystem) readonly.
- Freeing unused kernel memory: 152k freed
- SCSI subsystem initialized
- scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 *****
- scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
- scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
- scsi0: Firmware Version: 5.07B, I/O Address: 0xD040, IRQ Channel: 11/Edge
- scsi0: PCI Bus: 0, Device: 21, Address: 0xF0806000, Host Adapter SCSI ID: 7
- scsi0: Parity Checking: Enabled, Extended Translation: Enabled
- scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
- scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
- scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
- scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192
- scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0 : BusLogic BT-958
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:0:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:1:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:2:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:3:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:4:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:5:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:6:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:8:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:9:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:10:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:11:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:12:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:13:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:14:0: Device offlined - not ready after error recovery
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi0: *** BusLogic BT-958 Initialized Successfully ***
- scsi 0:0:15:0: Device offlined - not ready after error recovery
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement