[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.10.0-rc8 (libreelec.tv@nmacleod.com) (gcc version 6.2.0 (GCC) ) #1 SMP Mon Feb 13 20:31:26 GMT 2017
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] cma: Reserved 8 MiB at 0x2b400000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 179968
[    0.000000] free_area_init_node: node 0, pgdat 80c36c40, node_mem_map aadd0000
[    0.000000]   Normal zone: 1582 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 179968 pages, LIFO batch:31
[    0.000000] percpu: Embedded 14 pages/cpu @abea3000 s25356 r8192 d23796 u57344
[    0.000000] pcpu-alloc: s25356 r8192 d23796 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 178386
[    0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1184 bcm2708_fb.fbheight=624 bcm2709.boardrev=0xa02082 bcm2709.serial=0x5ea3802c smsc95xx.macaddr=B8:27:EB:A3:80:2C bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img usbcore.autosuspend=-1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 692300K/719872K available (6144K kernel code, 223K rwdata, 1296K rodata, 3072K init, 402K bss, 19380K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xac000000 - 0xff800000   (1336 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xabf00000   ( 703 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x80700000   (7136 kB)
[    0.000000]       .init : 0x80900000 - 0x80c00000   (3072 kB)
[    0.000000]       .data : 0x80c00000 - 0x80c37f08   ( 224 kB)
[    0.000000]        .bss : 0x80c39000 - 0x80c9da34   ( 403 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
[    0.000000] arm_arch_timer: WARNING: Please fix your firmware
[    0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
[    0.000000] arm_arch_timer: WARNING: Please fix your firmware
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000018] Switching to timer-based delay loop, resolution 52ns
[    0.000227] Console: colour dummy device 80x30
[    0.000243] console [tty0] enabled
[    0.000262] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
[    0.000276] pid_max: default: 32768 minimum: 301
[    0.000423] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000430] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001209] Disabling cpuset control group subsystem
[    0.001301] CPU: Testing write buffer coherency: ok
[    0.001757] CPU0: update cpu_capacity 1024
[    0.001764] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002066] Setting up static identity map for 0x100000 - 0x100034
[    0.002875] smp: Bringing up secondary CPUs ...
[    0.003555] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
[    0.003559] arm_arch_timer: WARNING: Please fix your firmware
[    0.003565] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
[    0.003568] arm_arch_timer: WARNING: Please fix your firmware
[    0.003578] CPU1: update cpu_capacity 1024
[    0.003584] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.004176] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
[    0.004179] arm_arch_timer: WARNING: Please fix your firmware
[    0.004184] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
[    0.004186] arm_arch_timer: WARNING: Please fix your firmware
[    0.004195] CPU2: update cpu_capacity 1024
[    0.004200] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.004746] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
[    0.004749] arm_arch_timer: WARNING: Please fix your firmware
[    0.004753] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
[    0.004756] arm_arch_timer: WARNING: Please fix your firmware
[    0.004764] CPU3: update cpu_capacity 1024
[    0.004770] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.004835] smp: Brought up 1 node, 4 CPUs
[    0.004844] SMP: Total of 4 processors activated (153.00 BogoMIPS).
[    0.004847] CPU: All CPU(s) started in HYP mode.
[    0.004850] CPU: Virtualization extensions available.
[    0.005396] devtmpfs: initialized
[    0.016358] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.016614] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.017033] pinctrl core: initialized pinctrl subsystem
[    0.017896] NET: Registered protocol family 16
[    0.020127] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.036661] cpuidle: using governor ladder
[    0.050026] cpuidle: using governor menu
[    0.050711] Serial: AMBA PL011 UART driver
[    0.053662] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.054126] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.101059] bcm2835-dma 3f007000.dma: DMA legacy API manager at ac00f000, dmachans=0x1
[    0.102633] SCSI subsystem initialized
[    0.102903] usbcore: registered new interface driver usbfs
[    0.102979] usbcore: registered new interface driver hub
[    0.103057] usbcore: registered new device driver usb
[    0.103570] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-02-13 18:18
[    0.104995] clocksource: Switched to clocksource arch_sys_counter
[    0.115724] NET: Registered protocol family 2
[    0.116418] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.116525] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.116709] TCP: Hash tables configured (established 8192 bind 8192)
[    0.116798] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.116840] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.117027] NET: Registered protocol family 1
[    0.117350] RPC: Registered named UNIX socket transport module.
[    0.117354] RPC: Registered udp transport module.
[    0.117357] RPC: Registered tcp transport module.
[    0.117361] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.249778] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.250091] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.263239] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.265658] NFS: Registering the id_resolver key type
[    0.265684] Key type id_resolver registered
[    0.265688] Key type id_legacy registered
[    0.265701] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.269048] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.269057] io scheduler noop registered (default)
[    0.269061] io scheduler deadline registered
[    0.269280] io scheduler cfq registered
[    0.273463] gpio gpiochip1: GPIO chip parent is NULL
[    0.274131] BCM2708FB: allocated DMA memory eb510000
[    0.274149] BCM2708FB: allocated DMA channel 0 @ ac00f000
[    0.293069] Console: switching to colour frame buffer device 148x39
[    0.304897] bcm2835-rng 3f104000.rng: hwrng registered
[    0.305004] vc-cma: Videocore CMA driver
[    0.305009] vc-cma: vc_cma_base      = 0x00000000
[    0.305014] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    0.305018] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    0.305198] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)
[    0.319044] brd: module loaded
[    0.319186] loop: module loaded
[    0.322788] nbd: registered device at major 43
[    0.334614] usbcore: registered new interface driver rtsx_usb
[    0.334620] Loading iSCSI transport class v2.0-870.
[    0.335021] iscsi: registered transport (tcp)
[    0.335528] libphy: Fixed MDIO Bus: probed
[    0.335533] tun: Universal TUN/TAP device driver, 1.6
[    0.335536] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.335806] usbcore: registered new interface driver dm9601
[    0.335894] usbcore: registered new interface driver smsc95xx
[    0.335928] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.561928] Core Release: 2.80a
[    0.561935] Setting default values for core params
[    0.561959] Finished setting default values for core params
[    0.762336] Using Buffer DMA mode
[    0.762342] Periodic Transfer Interrupt Enhancement - disabled
[    0.762346] Multiprocessor Interrupt Enhancement - disabled
[    0.762351] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.762361] Dedicated Tx FIFOs mode
[    0.762700] WARN::dwc_otg_hcd_init:1053: FIQ DMA bounce buffers: virt = 0xab504000 dma = 0xeb504000 len=9024
[    0.762724] FIQ FSM acceleration enabled for :
[    0.762724] Non-periodic Split Transactions
[    0.762724] Periodic Split Transactions
[    0.762724] High-Speed Isochronous Endpoints
[    0.762724] Interrupt/Control Split Transaction hack enabled
[    0.762730] dwc_otg: Microframe scheduler enabled
[    0.762772] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80527ad4
[    0.762780] WARN::hcd_init_fiq:460: FIQ ASM at 0x80527e34 length 36
[    0.762790] WARN::hcd_init_fiq:486: MPHI regs_base at 0xac07d000
[    0.762841] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.762875] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.762902] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    0.762946] Init: Port Power? op_state=1
[    0.762950] Init: Power Port (0)
[    0.763119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.763128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.763135] usb usb1: Product: DWC OTG Controller
[    0.763143] usb usb1: Manufacturer: Linux 4.10.0-rc8 dwc_otg_hcd
[    0.763150] usb usb1: SerialNumber: 3f980000.usb
[    0.763856] hub 1-0:1.0: USB hub found
[    0.763888] hub 1-0:1.0: 1 port detected
[    0.764382] dwc_otg: FIQ enabled
[    0.764386] dwc_otg: NAK holdoff enabled
[    0.764389] dwc_otg: FIQ split-transaction FSM enabled
[    0.764400] Module dwc_common_port init
[    0.764607] usbcore: registered new interface driver usb-storage
[    0.764802] mousedev: PS/2 mouse device common for all mice
[    0.764932] i2c /dev entries driver
[    0.765522] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.766116] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.766358] bcm2835-cpufreq: min=600000 max=1200000
[    0.766777] sdhci: Secure Digital Host Controller Interface driver
[    0.766781] sdhci: Copyright(c) Pierre Ossman
[    0.767123] sdhost: log_buf @ ab507000 (eb507000)
[    0.825001] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    0.845142] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.845370] ledtrig-cpu: registered to indicate activity on CPUs
[    0.845418] hidraw: raw HID events driver (C) Jiri Kosina
[    0.846330] usbcore: registered new interface driver usbhid
[    0.846332] usbhid: USB HID core driver
[    0.846617] vchiq: vchiq_init_state: slot_zero = ab580000, is_master = 0
[    0.848355] NET: Registered protocol family 10
[    0.848875] Segment Routing with IPv6
[    0.848908] NET: Registered protocol family 17
[    0.848956] Key type dns_resolver registered
[    0.849238] Registering SWP/SWPB emulation handler
[    0.852158] vc-sm: Videocore shared memory driver
[    0.852162] [vc_sm_connected_init]: start
[    0.854700] [vc_sm_connected_init]: end - returning 0
[    0.854886] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    0.855087] console [netcon0] enabled
[    0.855088] netconsole: network logging started
[    0.855091] of_cfs_init
[    0.855135] of_cfs_init: OK
[    0.857617] Freeing unused kernel memory: 3072K
[    0.885687] mmc0: host does not support reading read-only switch, assuming write-enable
[    0.887594] mmc0: overclocking to 100000000Hz
[    0.887644] mmc0: new high speed SDHC card at address 59b4
[    0.888008] mmcblk0: mmc0:59b4 NCard 14.7 GiB
[    0.889155]  mmcblk0: p1 p2
[    0.968443] Indeed it is in host mode hprt0 = 00021501
[    1.053100] random: fast init done
[    1.141693] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.141778] Indeed it is in host mode hprt0 = 00001101
[    1.331921] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.331929] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.332412] hub 1-1:1.0: USB hub found
[    1.332460] hub 1-1:1.0: 5 ports detected
[    1.381238] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.381692] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    1.425639] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.611723] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.701865] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    1.701872] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.704546] smsc95xx v1.0.5
[    1.757508] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:a3:80:2c
[    1.832277] systemd[1]: System time before build time, advancing clock.
[    1.845848] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    1.846123] systemd[1]: Detected architecture arm.
[    1.846280] systemd[1]: Set hostname to <LibreELEC>.
[    1.926770] systemd[1]: Created slice User and Session Slice.
[    1.926984] systemd[1]: Listening on udev Kernel Socket.
[    1.927125] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.927394] systemd[1]: Listening on RPCbind Server Activation Socket.
[    1.927690] systemd[1]: Created slice System Slice.
[    1.927865] systemd[1]: Reached target Slices.
[    1.928128] systemd[1]: dev-hugepages.mount: Couldn't determine result for ConditionVirtualization=!private-users, assuming failed: No such file or directory
[    1.961714] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
[    2.081078] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=2b02
[    2.081087] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.081091] usb 1-1.4: Product: 2.4G Wireless Device
[    2.081094] usb 1-1.4: Manufacturer: 2.4G
[    2.090088] input: 2.4G 2.4G Wireless Device as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:0C45:2B02.0001/input/input0
[    2.090590] hid-generic 0003:0C45:2B02.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G 2.4G Wireless Device] on usb-3f980000.usb-1.4/input2
[    2.095927] input: 2.4G 2.4G Wireless Device as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.3/0003:0C45:2B02.0002/input/input1
[    2.110828] systemd-journald[212]: Received request to flush runtime journal from PID 1
[    2.152455] hid-generic 0003:0C45:2B02.0002: input,hidraw1: USB HID v1.10 Keyboard [2.4G 2.4G Wireless Device] on usb-3f980000.usb-1.4/input3
[    2.358360] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[    2.448810] usb 1-1.3: New USB device found, idVendor=0572, idProduct=6831
[    2.448835] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.448838] usb 1-1.3: Product: S960
[    2.448842] usb 1-1.3: Manufacturer: Bestunar
[    2.448845] usb 1-1.3: SerialNumber: 20120511
[    2.573889] random: crng init done
[    3.252828] usbcore: registered new interface driver snd-usb-audio
[    3.281711] Console: switching to colour dummy device 80x30
[    3.605683] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    3.862023] uart-pl011 3f201000.serial: no DMA platform data
[    3.874705] rc_core: loading out-of-tree module taints kernel.
[    3.875588] WARNING: You are using an experimental version of the media stack.
[    3.875588] 	As the driver is backported to an older kernel, it doesn't offer
[    3.875588] 	enough quality for its usage in production.
[    3.875588] 	Use it with care.
[    3.875588] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[    3.875588] 	4281ac91840ee79c67c7c911e82ba4fbf0a7f5a9 avl6882: Update firmware patches.
[    3.898505] WARNING: You are using an experimental version of the media stack.
[    3.898505] 	As the driver is backported to an older kernel, it doesn't offer
[    3.898505] 	enough quality for its usage in production.
[    3.898505] 	Use it with care.
[    3.898505] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[    3.898505] 	4281ac91840ee79c67c7c911e82ba4fbf0a7f5a9 avl6882: Update firmware patches.
[    4.019651] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    4.019982] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.178390] usb 1-1.3: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
[    4.179109] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[    4.179166] dvbdev: DVB: registering new adapter (DVBSky S960/S860)
[    4.180463] usb 1-1.3: dvb_usb_v2: MAC address: 00:17:42:54:96:0c
[    4.204670] i2c i2c-3: Added multiplexed i2c bus 4
[    4.292053] ts2020 4-0060: Montage Technology TS2022 successfully identified
[    4.292094] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Montage Technology M88DS3103)...
[    4.292385] rc rc0: DVBSky S960/S860 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0
[    4.328353] Registered IR keymap rc-dvbsky
[    4.328585] input: DVBSky S960/S860 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0/input2
[    4.329077] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 300 msecs
[    4.329087] usb 1-1.3: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected
[    4.329165] usbcore: registered new interface driver dvb_usb_dvbsky
[    5.598253] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.600324] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[    5.614321] 8021q: 802.1Q VLAN Support v1.8
[    6.832867] m88ds3103 3-0068: found a 'Montage Technology M88DS3103' in cold state
[    6.842399] m88ds3103 3-0068: downloading firmware from file 'dvb-demod-m88ds3103.fw'
[    7.826790] m88ds3103 3-0068: found a 'Montage Technology M88DS3103' in warm state
[    7.826799] m88ds3103 3-0068: firmware version: 3.B
[    7.842529] usb 1-1.3: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
[    8.262115] Bluetooth: Core ver 2.22
[    8.262202] NET: Registered protocol family 31
[    8.262207] Bluetooth: HCI device and connection manager initialized
[    8.262856] Bluetooth: HCI socket layer initialized
[    8.262870] Bluetooth: L2CAP socket layer initialized
[    8.262904] Bluetooth: SCO socket layer initialized
[    8.270618] Bluetooth: HCI UART driver ver 2.3
[    8.270628] Bluetooth: HCI UART protocol H4 registered
[    8.270632] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    8.270767] Bluetooth: HCI UART protocol Broadcom registered