document.write('
Data hosted with ♥ by Pastebin.com - Download Raw - See Original
  1. [root@freenas] ~# smartctl -x -qnoserial /dev/ada4
  2. smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
  3. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Western Digital Red
  7. Device Model: WDC WD20EFRX-68EUZN0
  8. Firmware Version: 80.00A80
  9. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  10. Sector Sizes: 512 bytes logical, 4096 bytes physical
  11. Rotation Rate: 5400 rpm
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: ACS-2 (minor revision not indicated)
  14. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  15. Local Time is: Tue Aug 18 22:58:27 2015 EDT
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18. AAM feature is: Unavailable
  19. APM feature is: Unavailable
  20. Rd look-ahead is: Enabled
  21. Write cache is: Enabled
  22. ATA Security is: Disabled, frozen [SEC2]
  23. Wt Cache Reorder: Enabled
  24.  
  25. === START OF READ SMART DATA SECTION ===
  26. SMART overall-health self-assessment test result: PASSED
  27.  
  28. General SMART Values:
  29. Offline data collection status: (0x00) Offline data collection activity
  30. was never started.
  31. Auto Offline Data Collection: Disabled.
  32. Self-test execution status: ( 0) The previous self-test routine completed
  33. without error or no self-test has ever
  34. been run.
  35. Total time to complete Offline
  36. data collection: (28080) seconds.
  37. Offline data collection
  38. capabilities: (0x7b) SMART execute Offline immediate.
  39. Auto Offline data collection on/off support.
  40. Suspend Offline collection upon new
  41. command.
  42. Offline surface scan supported.
  43. Self-test supported.
  44. Conveyance Self-test supported.
  45. Selective Self-test supported.
  46. SMART capabilities: (0x0003) Saves SMART data before entering
  47. power-saving mode.
  48. Supports SMART auto save timer.
  49. Error logging capability: (0x01) Error logging supported.
  50. General Purpose Logging supported.
  51. Short self-test routine
  52. recommended polling time: ( 2) minutes.
  53. Extended self-test routine
  54. recommended polling time: ( 284) minutes.
  55. Conveyance self-test routine
  56. recommended polling time: ( 5) minutes.
  57. SCT capabilities: (0x703d) SCT Status supported.
  58. SCT Error Recovery Control supported.
  59. SCT Feature Control supported.
  60. SCT Data Table supported.
  61.  
  62. SMART Attributes Data Structure revision number: 16
  63. Vendor Specific SMART Attributes with Thresholds:
  64. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  65. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
  66. 3 Spin_Up_Time POS--K 186 173 021 - 3683
  67. 4 Start_Stop_Count -O--CK 100 100 000 - 125
  68. 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  69. 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
  70. 9 Power_On_Hours -O--CK 088 088 000 - 9482
  71. 10 Spin_Retry_Count -O--CK 100 100 000 - 0
  72. 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
  73. 12 Power_Cycle_Count -O--CK 100 100 000 - 124
  74. 192 Power-Off_Retract_Count -O--CK 200 200 000 - 89
  75. 193 Load_Cycle_Count -O--CK 199 199 000 - 4139
  76. 194 Temperature_Celsius -O---K 122 094 000 - 25
  77. 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  78. 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  79. 198 Offline_Uncorrectable ----CK 100 253 000 - 0
  80. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  81. 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
  82. ||||||_ K auto-keep
  83. |||||__ C event count
  84. ||||___ R error rate
  85. |||____ S speed/performance
  86. ||_____ O updated online
  87. |______ P prefailure warning
  88.  
  89. General Purpose Log Directory Version 1
  90. SMART Log Directory Version 1 [multi-sector log support]
  91. Address Access R/W Size Description
  92. 0x00 GPL,SL R/O 1 Log Directory
  93. 0x01 SL R/O 1 Summary SMART error log
  94. 0x02 SL R/O 5 Comprehensive SMART error log
  95. 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  96. 0x06 SL R/O 1 SMART self-test log
  97. 0x07 GPL R/O 1 Extended self-test log
  98. 0x09 SL R/W 1 Selective self-test log
  99. 0x10 GPL R/O 1 NCQ Command Error log
  100. 0x11 GPL R/O 1 SATA Phy Event Counters
  101. 0x21 GPL R/O 1 Write stream error log
  102. 0x22 GPL R/O 1 Read stream error log
  103. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  104. 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
  105. 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
  106. 0xbd GPL,SL VS 1 Device vendor specific log
  107. 0xc0 GPL,SL VS 1 Device vendor specific log
  108. 0xc1 GPL VS 93 Device vendor specific log
  109. 0xe0 GPL,SL R/W 1 SCT Command/Status
  110. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  111.  
  112. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  113. No Errors Logged
  114.  
  115. SMART Extended Self-test Log Version: 1 (1 sectors)
  116. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  117. # 1 Short offline Completed without error 00% 9438 -
  118. # 2 Short offline Completed without error 00% 9390 -
  119. # 3 Short offline Completed without error 00% 9345 -
  120. # 4 Short offline Completed without error 00% 9297 -
  121. # 5 Short offline Completed without error 00% 9249 -
  122. # 6 Short offline Completed without error 00% 9201 -
  123. # 7 Short offline Completed without error 00% 9153 -
  124. # 8 Short offline Completed without error 00% 9105 -
  125. # 9 Short offline Completed without error 00% 9057 -
  126. #10 Short offline Completed without error 00% 9033 -
  127. #11 Short offline Completed without error 00% 8986 -
  128. #12 Short offline Completed without error 00% 8938 -
  129. #13 Short offline Completed without error 00% 8890 -
  130. #14 Short offline Completed without error 00% 8842 -
  131. #15 Short offline Completed without error 00% 8798 -
  132. #16 Short offline Completed without error 00% 8750 -
  133. #17 Short offline Completed without error 00% 8702 -
  134.  
  135. SMART Selective self-test log data structure revision number 1
  136. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  137. 1 0 0 Not_testing
  138. 2 0 0 Not_testing
  139. 3 0 0 Not_testing
  140. 4 0 0 Not_testing
  141. 5 0 0 Not_testing
  142. Selective self-test flags (0x0):
  143. After scanning selected spans, do NOT read-scan remainder of disk.
  144. If Selective self-test is pending on power-up, resume after 0 minute delay.
  145.  
  146. SCT Status Version: 3
  147. SCT Version (vendor specific): 258 (0x0102)
  148. SCT Support Level: 1
  149. Device State: Active (0)
  150. Current Temperature: 25 Celsius
  151. Power Cycle Min/Max Temperature: 25/28 Celsius
  152. Lifetime Min/Max Temperature: 17/54 Celsius
  153. Under/Over Temperature Limit Count: 0/0
  154.  
  155. SCT Temperature History Version: 2
  156. Temperature Sampling Period: 1 minute
  157. Temperature Logging Interval: 1 minute
  158. Min/Max recommended Temperature: 0/60 Celsius
  159. Min/Max Temperature Limit: -41/85 Celsius
  160. Temperature History Size (Index): 478 (228)
  161.  
  162. Index Estimated Time Temperature Celsius
  163. 229 2015-08-18 15:01 25 ******
  164. ... ..(105 skipped). .. ******
  165. 335 2015-08-18 16:47 25 ******
  166. 336 2015-08-18 16:48 26 *******
  167. 337 2015-08-18 16:49 26 *******
  168. 338 2015-08-18 16:50 26 *******
  169. 339 2015-08-18 16:51 25 ******
  170. ... ..(288 skipped). .. ******
  171. 150 2015-08-18 21:40 25 ******
  172. 151 2015-08-18 21:41 26 *******
  173. ... ..( 17 skipped). .. *******
  174. 169 2015-08-18 21:59 26 *******
  175. 170 2015-08-18 22:00 25 ******
  176. ... ..( 57 skipped). .. ******
  177. 228 2015-08-18 22:58 25 ******
  178.  
  179. SCT Error Recovery Control:
  180. Read: 70 (7.0 seconds)
  181. Write: 70 (7.0 seconds)
  182.  
  183. Device Statistics (GP Log 0x04) not supported
  184.  
  185. SATA Phy Event Counters (GP Log 0x11)
  186. ID Size Value Description
  187. 0x0001 2 0 Command failed due to ICRC error
  188. 0x0002 2 0 R_ERR response for data FIS
  189. 0x0003 2 0 R_ERR response for device-to-host data FIS
  190. 0x0004 2 0 R_ERR response for host-to-device data FIS
  191. 0x0005 2 0 R_ERR response for non-data FIS
  192. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  193. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  194. 0x0008 2 0 Device-to-host non-data FIS retries
  195. 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
  196. 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
  197. 0x000b 2 0 CRC errors within host-to-device FIS
  198. 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
  199. 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
  200. 0x8000 4 460344 Vendor specific
  201.  
  202. [root@freenas] ~#
');