document.write('
Data hosted with ♥ by Pastebin.com - Download Raw - See Original
  1. [root@freenas] ~# smartctl -x -qnoserial /dev/ada3
  2. smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
  3. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Western Digital Caviar Black
  7. Device Model: WDC WD2001FASS-00U0B0
  8. Firmware Version: 01.00101
  9. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  10. Sector Size: 512 bytes logical/physical
  11. Rotation Rate: 7200 rpm
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: ATA8-ACS (minor revision not indicated)
  14. SATA Version is: SATA 2.6, 3.0 Gb/s
  15. Local Time is: Tue Aug 18 22:49:13 2015 EDT
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18. AAM feature is: Disabled
  19. APM feature is: Disabled
  20. Rd look-ahead is: Enabled
  21. Write cache is: Enabled
  22. ATA Security is: Disabled, frozen [SEC2]
  23. Wt Cache Reorder: Enabled
  24.  
  25. === START OF READ SMART DATA SECTION ===
  26. SMART overall-health self-assessment test result: PASSED
  27.  
  28. General SMART Values:
  29. Offline data collection status: (0x84) Offline data collection activity
  30. was suspended by an interrupting command from host.
  31. Auto Offline Data Collection: Enabled.
  32. Self-test execution status: ( 0) The previous self-test routine completed
  33. without error or no self-test has ever
  34. been run.
  35. Total time to complete Offline
  36. data collection: (31560) seconds.
  37. Offline data collection
  38. capabilities: (0x7b) SMART execute Offline immediate.
  39. Auto Offline data collection on/off support.
  40. Suspend Offline collection upon new
  41. command.
  42. Offline surface scan supported.
  43. Self-test supported.
  44. Conveyance Self-test supported.
  45. Selective Self-test supported.
  46. SMART capabilities: (0x0003) Saves SMART data before entering
  47. power-saving mode.
  48. Supports SMART auto save timer.
  49. Error logging capability: (0x01) Error logging supported.
  50. General Purpose Logging supported.
  51. Short self-test routine
  52. recommended polling time: ( 2) minutes.
  53. Extended self-test routine
  54. recommended polling time: ( 361) minutes.
  55. Conveyance self-test routine
  56. recommended polling time: ( 5) minutes.
  57. SCT capabilities: (0x3037) SCT Status supported.
  58. SCT Feature Control supported.
  59. SCT Data Table supported.
  60.  
  61. SMART Attributes Data Structure revision number: 16
  62. Vendor Specific SMART Attributes with Thresholds:
  63. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  64. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
  65. 3 Spin_Up_Time POS--K 098 040 021 - 12141
  66. 4 Start_Stop_Count -O--CK 100 100 000 - 212
  67. 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  68. 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
  69. 9 Power_On_Hours -O--CK 044 044 000 - 40902
  70. 10 Spin_Retry_Count -O--CK 100 100 000 - 0
  71. 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
  72. 12 Power_Cycle_Count -O--CK 100 100 000 - 210
  73. 192 Power-Off_Retract_Count -O--CK 200 200 000 - 155
  74. 193 Load_Cycle_Count -O--CK 132 132 000 - 205532
  75. 194 Temperature_Celsius -O---K 114 086 000 - 38
  76. 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  77. 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  78. 198 Offline_Uncorrectable ----CK 200 200 000 - 0
  79. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  80. 200 Multi_Zone_Error_Rate ---R-- 200 001 000 - 0
  81. ||||||_ K auto-keep
  82. |||||__ C event count
  83. ||||___ R error rate
  84. |||____ S speed/performance
  85. ||_____ O updated online
  86. |______ P prefailure warning
  87.  
  88. General Purpose Log Directory Version 1
  89. SMART Log Directory Version 1 [multi-sector log support]
  90. Address Access R/W Size Description
  91. 0x00 GPL,SL R/O 1 Log Directory
  92. 0x01 SL R/O 1 Summary SMART error log
  93. 0x02 SL R/O 5 Comprehensive SMART error log
  94. 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  95. 0x06 SL R/O 1 SMART self-test log
  96. 0x07 GPL R/O 1 Extended self-test log
  97. 0x09 SL R/W 1 Selective self-test log
  98. 0x10 GPL R/O 1 NCQ Command Error log
  99. 0x11 GPL R/O 1 SATA Phy Event Counters
  100. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  101. 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
  102. 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
  103. 0xb6 GPL VS 1 Device vendor specific log
  104. 0xb7 GPL,SL VS 1 Device vendor specific log
  105. 0xbd GPL,SL VS 1 Device vendor specific log
  106. 0xc0 GPL,SL VS 1 Device vendor specific log
  107. 0xc1 GPL VS 24 Device vendor specific log
  108. 0xe0 GPL,SL R/W 1 SCT Command/Status
  109. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  110.  
  111. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  112. No Errors Logged
  113.  
  114. SMART Extended Self-test Log Version: 1 (1 sectors)
  115. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  116. # 1 Short offline Completed without error 00% 40859 -
  117. # 2 Short offline Completed without error 00% 40811 -
  118. # 3 Short offline Completed without error 00% 40765 -
  119. # 4 Short offline Completed without error 00% 40718 -
  120. # 5 Short offline Completed without error 00% 40670 -
  121. # 6 Short offline Completed without error 00% 40623 -
  122. # 7 Short offline Completed without error 00% 40576 -
  123. # 8 Short offline Completed without error 00% 40529 -
  124. # 9 Short offline Completed without error 00% 40482 -
  125. #10 Short offline Completed without error 00% 40459 -
  126. #11 Short offline Completed without error 00% 40412 -
  127. #12 Short offline Completed without error 00% 40365 -
  128. #13 Short offline Completed without error 00% 40317 -
  129. #14 Short offline Completed without error 00% 40270 -
  130. #15 Short offline Completed without error 00% 40227 -
  131. #16 Short offline Completed without error 00% 40179 -
  132. #17 Short offline Completed without error 00% 40132 -
  133.  
  134. SMART Selective self-test log data structure revision number 1
  135. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  136. 1 0 0 Not_testing
  137. 2 0 0 Not_testing
  138. 3 0 0 Not_testing
  139. 4 0 0 Not_testing
  140. 5 0 0 Not_testing
  141. Selective self-test flags (0x0):
  142. After scanning selected spans, do NOT read-scan remainder of disk.
  143. If Selective self-test is pending on power-up, resume after 0 minute delay.
  144.  
  145. SCT Status Version: 2
  146. SCT Version (vendor specific): 258 (0x0102)
  147. SCT Support Level: 1
  148. Device State: Unknown (16)
  149. Current Temperature: 38 Celsius
  150. Power Cycle Min/Max Temperature: 37/41 Celsius
  151. Lifetime Min/Max Temperature: ?/66 Celsius
  152. Under/Over Temperature Limit Count: 0/0
  153.  
  154. SCT Temperature History Version: 2
  155. Temperature Sampling Period: 1 minute
  156. Temperature Logging Interval: 1 minute
  157. Min/Max recommended Temperature: 0/60 Celsius
  158. Min/Max Temperature Limit: -41/85 Celsius
  159. Temperature History Size (Index): 478 (254)
  160.  
  161. Index Estimated Time Temperature Celsius
  162. 255 2015-08-18 14:52 37 ******************
  163. ... ..( 3 skipped). .. ******************
  164. 259 2015-08-18 14:56 37 ******************
  165. 260 2015-08-18 14:57 38 *******************
  166. ... ..( 2 skipped). .. *******************
  167. 263 2015-08-18 15:00 38 *******************
  168. 264 2015-08-18 15:01 39 ********************
  169. ... ..( 2 skipped). .. ********************
  170. 267 2015-08-18 15:04 39 ********************
  171. 268 2015-08-18 15:05 38 *******************
  172. ... ..( 15 skipped). .. *******************
  173. 284 2015-08-18 15:21 38 *******************
  174. 285 2015-08-18 15:22 39 ********************
  175. ... ..( 7 skipped). .. ********************
  176. 293 2015-08-18 15:30 39 ********************
  177. 294 2015-08-18 15:31 40 *********************
  178. ... ..( 3 skipped). .. *********************
  179. 298 2015-08-18 15:35 40 *********************
  180. 299 2015-08-18 15:36 39 ********************
  181. ... ..( 7 skipped). .. ********************
  182. 307 2015-08-18 15:44 39 ********************
  183. 308 2015-08-18 15:45 38 *******************
  184. ... ..( 4 skipped). .. *******************
  185. 313 2015-08-18 15:50 38 *******************
  186. 314 2015-08-18 15:51 39 ********************
  187. ... ..( 8 skipped). .. ********************
  188. 323 2015-08-18 16:00 39 ********************
  189. 324 2015-08-18 16:01 40 *********************
  190. ... ..( 3 skipped). .. *********************
  191. 328 2015-08-18 16:05 40 *********************
  192. 329 2015-08-18 16:06 39 ********************
  193. ... ..( 6 skipped). .. ********************
  194. 336 2015-08-18 16:13 39 ********************
  195. 337 2015-08-18 16:14 38 *******************
  196. ... ..( 6 skipped). .. *******************
  197. 344 2015-08-18 16:21 38 *******************
  198. 345 2015-08-18 16:22 39 ********************
  199. ... ..( 17 skipped). .. ********************
  200. 363 2015-08-18 16:40 39 ********************
  201. 364 2015-08-18 16:41 38 *******************
  202. ... ..( 11 skipped). .. *******************
  203. 376 2015-08-18 16:53 38 *******************
  204. 377 2015-08-18 16:54 39 ********************
  205. ... ..( 10 skipped). .. ********************
  206. 388 2015-08-18 17:05 39 ********************
  207. 389 2015-08-18 17:06 38 *******************
  208. ... ..( 19 skipped). .. *******************
  209. 409 2015-08-18 17:26 38 *******************
  210. 410 2015-08-18 17:27 39 ********************
  211. ... ..( 8 skipped). .. ********************
  212. 419 2015-08-18 17:36 39 ********************
  213. 420 2015-08-18 17:37 38 *******************
  214. ... ..( 19 skipped). .. *******************
  215. 440 2015-08-18 17:57 38 *******************
  216. 441 2015-08-18 17:58 39 ********************
  217. ... ..( 7 skipped). .. ********************
  218. 449 2015-08-18 18:06 39 ********************
  219. 450 2015-08-18 18:07 38 *******************
  220. ... ..( 21 skipped). .. *******************
  221. 472 2015-08-18 18:29 38 *******************
  222. 473 2015-08-18 18:30 39 ********************
  223. ... ..( 3 skipped). .. ********************
  224. 477 2015-08-18 18:34 39 ********************
  225. 0 2015-08-18 18:35 38 *******************
  226. ... ..(191 skipped). .. *******************
  227. 192 2015-08-18 21:47 38 *******************
  228. 193 2015-08-18 21:48 37 ******************
  229. ... ..( 60 skipped). .. ******************
  230. 254 2015-08-18 22:49 37 ******************
  231.  
  232. SCT Error Recovery Control command not supported
  233.  
  234. Device Statistics (GP Log 0x04) not supported
  235.  
  236. SATA Phy Event Counters (GP Log 0x11)
  237. ID Size Value Description
  238. 0x0001 2 0 Command failed due to ICRC error
  239. 0x0002 2 0 R_ERR response for data FIS
  240. 0x0003 2 0 R_ERR response for device-to-host data FIS
  241. 0x0004 2 0 R_ERR response for host-to-device data FIS
  242. 0x0005 2 0 R_ERR response for non-data FIS
  243. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  244. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  245. 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
  246. 0x000b 2 0 CRC errors within host-to-device FIS
  247. 0x8000 4 459780 Vendor specific
  248.  
  249. [root@freenas] ~# [root@freenas] ~# smartctl -x -qnoserial /dev/ada3
  250. [root@freenas]: No match.
  251. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  252.  
  253. [root@freenas] ~# smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
  254. Badly placed ()'s.
  255. [root@freenas] ~# Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  256. Badly placed ()'s.
  257. [root@freenas] ~#
  258. [root@freenas] ~# === START OF INFORMATION SECTION ===
  259. ===: Command not found.
  260. [root@freenas] ~# Firmware Version: 01.00101
  261. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  262. Sector Size: 512 bytes logical/physical
  263. Rotation Rate: 7200 rpm
  264. Device is: In smartctl database [for details use: -P show]
  265. Model Family: Western Digital Caviar Black
  266. Model: Command not found.
  267. [root@freenas] ~# Device Model: WDC WD2001FASS-00U0B0
  268. Device: Command not found.
  269. [root@freenas] ~# Firmware Version: 01.00101
  270. Firmware: Command not found.
  271. [root@freenas] ~# User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  272. User: Command not found.
  273. [root@freenas] ~# Sector Size: 512 bytes logical/physical
  274. Sector: Command not found.
  275. [root@freenas] ~# Rotation Rate: 7200 rpm
  276. Rotation: Command not found.
  277. [root@freenas] ~# Device is: In smartctl database [for details use: -P show]
  278. Device: Command not found.
  279. [root@freenas] ~# ATA Version is: ATA8-ACS (minor revision not indicated)
  280. Badly placed ()'s.
  281. [root@freenas] ~# SATA Version is: SATA 2.6, 3.0 Gb/s
  282. SATA: Command not found.
  283. without error or no self-test has ever
  284. been run.
  285. Total time to complete Offline
  286. data collection: (31560) seconds.
  287. Offline data collection
  288. capabilities: (0x7b) SMART execute Offline immediate.
  289. Auto Offline data collection on/off support.
  290. Suspend Offline collection upon new
  291. command.
  292. Offline surface scan supported.
  293. Self-test supported.
  294. Conveyance Self-test supported.
  295. Selective Self-test supported.
  296. SMART capabilities: (0x0003) Saves SMART data before entering
  297. power-saving mode.
  298. Supports SMART auto save timer.
  299. [root@freenas] ~# Error logging capability: (0x01) Error logging supported.
  300. General Purpose Logging supported.
  301. Short self-test routine
  302. recommended polling time: ( 2) minutes.
  303. Extended self-test routine
  304. recommended polling time: ( 361) minutes.
  305. Local Time is: Tue Aug 18 22:49:13 2015 EDT
  306. Local: Command not found.
  307. [root@freenas] ~# SMART support is: Available - device has SMART capability.
  308. SMART: Command not found.
  309. [root@freenas] ~# SMART support is: Enabled
  310. SMART: Command not found.
  311. [root@freenas] ~# AAM feature is: Disabled
  312. AAM: Command not found.
  313. [root@freenas] ~# Conveyance self-test routine
  314. recommended polling time: ( 5) minutes.
  315. SCT capabilities: (0x3037) SCT Status supported.
  316. SCT Feature Control supported.
  317. SCT Data Table supported.
  318.  
  319. SMART Attributes Data Structure revision number: 16
  320. Vendor Specific SMART Attributes with Thresholds:
  321. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  322. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
  323. 3 Spin_Up_Time POS--K 098 040 021 - 12141
  324. 4 Start_Stop_Count -O--CK 100 100 000 - 212
  325. APM feature is: Disabled
  326. APM: Command not found.
  327. [root@freenas] ~# Rd look-ahead is: Enabled
  328.  
  329. CORRECT>od look-ahead is: Enabled (y|n|e|a)? no
  330. Rd: Command not found.
  331. [root@freenas] ~# rite cache is: Enabled
  332.  
  333. CORRECT>write cache is: Enabled (y|n|e|a)? no
  334. rite: Command not found.
  335. [root@freenas] ~# TA Security is: Disabled, frozen [SEC2]
  336. TA: No match.
  337. [root@freenas] ~# Wt Cache Reorder: Enabled
  338.  
  339. CORRECT>mt Cache Reorder: Enabled (y|n|e|a)? no
  340. Wt: Command not found.
  341. [root@freenas] ~# 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  342. 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
  343. 9 Power_On_Hours -O--CK 044 044 000 - 40902
  344. 10 Spin_Retry_Count -O--CK 100 100 000 - 0
  345. 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
  346. 12 Power_Cycle_Count -O--CK 100 100 000 - 210
  347. 192 Power-Off_Retract_Count -O--CK 200 200 000 - 155
  348. === START OF READ SMART DATA SECTION ===
  349. 193 Load_Cycle_Count -O--CK 132 132 000 - 205532
  350. 194 Temperature_Celsius -O---K 114 086 000 - 38
  351. 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  352. 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  353. 198 Offline_Uncorrectable ----CK 200 200 000 - 0
  354. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  355. 200 Multi_Zone_Error_Rate ---R-- 200 001 000 - 0
  356. ||||||_ K auto-keep
  357. |||||__ C event count
  358. ===: Command not found.
  359. [root@freenas] ~# SMART overall-health self-assessment test result: PASSED
  360. SMART: Command not found.
  361. [root@freenas] ~#
  362. [root@freenas] ~# General SMART Values:
  363. General: Command not found.
  364. [root@freenas] ~# Offline data collection status: (0x84) Offline data collection activity
  365. Badly placed ()'s.
  366. [root@freenas] ~# was suspended by an interrupting command from host.
  367.  
  368. CORRECT> as suspended by an interrupting command from host. (y|n|e|a)? yes
  369. ||||___ R error rate
  370. |||____ S speed/performance
  371. ||_____ O updated online
  372. |______ P prefailure warning
  373.  
  374. General Purpose Log Directory Version 1
  375. SMART Log Directory Version 1 [multi-sector log support]
  376. Address Access R/W Size Description
  377. 0x00 GPL,SL R/O 1 Log Directory
  378. 0x01 SL R/O 1 Summary SMART error log
  379. 0x02 SL R/O 5 Comprehensive SMART error log
  380. 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  381. 0x06 SL R/O 1 SMART self-test log
  382. 0x07 GPL R/O 1 Extended self-test log
  383. 0x09 SL R/W 1 Selective self-test log
  384. 0x10 GPL R/O 1 NCQ Command Error log
  385. 0x11 GPL R/O 1 SATA Phy Event Counters
  386. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  387. 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
  388. 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
  389. 0xb6 GPL VS 1 Device vendor specific log
  390. 0xb7 GPL,SL VS 1 Device vendor specific log
  391. 0xbd GPL,SL VS 1 Device vendor specific log
  392. 0xc0 GPL,SL VS 1 Device vendor specific log
  393. 0xc1 GPL VS 24 Device vendor specific log
  394. 0xe0 GPL,SL R/W 1 SCT Command/Status
  395. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  396.  
  397. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  398. No Errors Logged
  399.  
  400. SMART Extended Self-test Log Version: 1 (1 sectors)
  401. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  402. # 1 Short offline Completed without error 00% 40859 -
  403. # 2 Short offline Completed without error 00% 40811 -
  404. # 3 Short offline Completed without error 00% 40765 -
  405. # 4 Short offline Completed without error 00% 40718 -
  406. # 5 Short offline Completed without error 00% 40670 -
  407. # 6 Short offline Completed without error 00% 40623 -
  408. # 7 Short offline Completed without error 00% 40576 -
  409. # 8 Short offline Completed without error 00% 40529 -
  410. # 9 Short offline Completed without error 00% 40482 -
  411. #10 Short offline Completed without error 00% 40459 -
  412. #11 Short offline Completed without error 00% 40412 -
  413. #12 Short offline Completed without error 00% 40365 -
  414. #13 Short offline Completed without error 00% 40317 -
  415. #14 Short offline Completed without error 00% 40270 -
  416. #15 Short offline Completed without error 00% 40227 -
  417. #16 Short offline Completed without error 00% 40179 -
  418. #17 Short offline Completed without error 00% 40132 -
  419.  
  420. SMART Selective self-test log data structure revision number 1
  421. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  422. 1 0 0 Not_testing
  423. 2 0 0 Not_testing
  424. 3 0 0 Not_testing
  425. 4 0 0 Not_testing
  426. 5 0 0 Not_testing
  427. Selective self-test flags (0x0):
  428. After scanning selected spans, do NOT read-scan remainder of disk.
  429. If Selective self-test is pending on power-up, resume after 0 minute delay.
  430.  
  431. SCT Status Version: 2
  432. SCT Version (vendor specific): 258 (0x0102)
  433. SCT Support Level: 1
  434. Device State: Unknown (16)
  435. Current Temperature: 38 Celsius
  436. Power Cycle Min/Max Temperature: 37/41 Celsius
  437. Lifetime Min/Max Temperature: ?/66 Celsius
  438. Under/Over Temperature Limit Count: 0/0
  439.  
  440. SCT Temperature History Version: 2
  441. Temperature Sampling Period: 1 minute
  442. Temperature Logging Interval: 1 minute
  443. Min/Max recommended Temperature: 0/60 Celsius
  444. Min/Max Temperature Limit: -41/85 Celsius
  445. Temperature History Size (Index): 478 (254)
  446.  
  447. Index Estimated Time Temperature Celsius
  448. 255 2015-08-18 14:52 37 ******************
  449. ... ..( 3 skipped). .. ******************
  450. 259 2015-08-18 14:56 37 ******************
  451. 260 2015-08-18 14:57 38 *******************
  452. ... ..( 2 skipped). .. *******************
  453. 263 2015-08-18 15:00 38 *******************
  454. 264 2015-08-18 15:01 39 ********************
  455. ... ..( 2 sAssembler messages:
  456. Error: can't open suspended for reading: No such file or directory
  457. suspended:0: Error: can't open by for reading: No such file or directory
  458. by:0: Error: can't open an for reading: No such file or directory
  459. an:0: Error: can't open interrupting for reading: No such file or directory
  460. interrupting:0: Error: can't open command for reading: No such file or directory
  461. command:0: Error: can't open from for reading: No such file or directory
  462. from:0: Error: can't open host. for reading: No such file or directory
  463. [root@freenas] ~# Auto Offline Data Collection: Enabled.
  464. Auto: Command not found.
  465. [root@freenas] ~# Self-test execution status: ( 0) The previous self-test routine completed
  466. Badly placed ()'s.
  467. [root@freenas] ~# without error or no self-test has ever
  468. without: Command not found.
  469. [root@freenas] ~# been run.
  470. been: Command not found.
  471. [root@freenas] ~# Total time to complete Offline
  472. Total: Command not found.
  473. [root@freenas] ~# data collection: (31560) seconds.
  474.  
  475. CORRECT>date collection: (31560) seconds. (y|n|e|a)? no
  476. Badly placed ()'s.
  477. [root@freenas] ~# ffline data collection
  478. ffline: Command not found.
  479. [root@freenas] ~# capabilities: (0x7b) SMART execute Offline immediate.
  480. Badly placed ()'s.
  481. [root@freenas] ~# Auto Offline data collection on/off support.
  482. Auto: Command not found.
  483. [root@freenas] ~# Suspend Offline collection upon new
  484.  
  485. CORRECT> suspend Offline collection upon new (y|n|e|a)? yes
  486. suspend: Too many arguments.
  487. [root@freenas] ~# command.
  488.  
  489. CORRECT> command (y|n|e|a)? yes
  490. [root@freenas] ~# Offline surface scan supported.
  491. Offline: Command not found.
  492. [root@freenas] ~# Self-test supported.
  493. Self-test: Command not found.
  494. [root@freenas] ~# Conveyance Self-test supported.
  495. Conveyance: Command not found.
  496. [root@freenas] ~# Selective Self-test supported.
  497. Selective: Command not found.
  498. [root@freenas] ~# SMART capabilities: (0x0003) Saves SMART data before entering
  499. Badly placed ()'s.
  500. [root@freenas] ~# power-saving mode.
  501. power-saving: Command not found.
  502. [root@freenas] ~# Supports SMART auto save timer.
  503. Supports: Command not found.
  504. [root@freenas] ~# Error logging capability: (0x01) Error logging supported.
  505. Badly placed ()'s.
  506. [root@freenas] ~# General Purpose Logging supported.
  507. General: Command not found.
  508. [root@freenas] ~# Short self-test routine
  509. Short: Command not found.
  510. [root@freenas] ~# recommended polling time: ( 2) minutes.
  511. Badly placed ()'s.
  512. [root@freenas] ~# Extended self-test routine
  513. Extended: Command not found.
  514. [root@freenas] ~# recommended polling time: ( 361) minutes.
  515. Badly placed ()'s.
  516. [root@freenas] ~# Conveyance self-test routine
  517. Conveyance: Command not found.
  518. [root@freenas] ~# recommended polling time: ( 5) minutes.
  519. Badly placed ()'s.
  520. [root@freenas] ~# SCT capabilities: (0x3037) SCT Status supported.
  521. Badly placed ()'s.
  522. [root@freenas] ~# SCT Feature Control supported.
  523. SCT: Command not found.
  524. [root@freenas] ~# SCT Data Table supported.
  525. SCT: Command not found.
  526. [root@freenas] ~#
  527. [root@freenas] ~# SMART Attributes Data Structure revision number: 16
  528. SMART: Command not found.
  529. [root@freenas] ~# Vendor Specific SMART Attributes with Thresholds:
  530. Vendor: Command not found.
  531. [root@freenas] ~# ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  532. ID#: Command not found.
  533. [root@freenas] ~# 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
  534. 1: Command not found.
  535. [root@freenas] ~# 3 Spin_Up_Time POS--K 098 040 021 - 12141
  536. 3: Command not found.
  537. [root@freenas] ~# 4 Start_Stop_Count -O--CK 100 100 000 - 212
  538. 4: Command not found.
  539. [root@freenas] ~# 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  540. 5: Command not found.
  541. [root@freenas] ~# 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
  542. 7: Command not found.
  543. [root@freenas] ~# 9 Power_On_Hours -O--CK 044 044 000 - 40902
  544. 9: Command not found.
  545. [root@freenas] ~# 10 Spin_Retry_Count -O--CK 100 100 000 - 0
  546. 10: Command not found.
  547. [root@freenas] ~# 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
  548. 11: Command not found.
  549. [root@freenas] ~# 12 Power_Cycle_Count -O--CK 100 100 000 - 210
  550. 12: Command not found.
  551. [root@freenas] ~# 192 Power-Off_Retract_Count -O--CK 200 200 000 - 155
  552. 192: Command not found.
  553. [root@freenas] ~# 193 Load_Cycle_Count -O--CK 132 132 000 - 205532
  554. 193: Command not found.
  555. [root@freenas] ~# 194 Temperature_Celsius -O---K 114 086 000 - 38
  556. 194: Command not found.
  557. [root@freenas] ~# 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  558. 196: Command not found.
  559. [root@freenas] ~# 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  560. 197: Command not found.
  561. [root@freenas] ~# 198 Offline_Uncorrectable ----CK 200 200 000 - 0
  562. 198: Command not found.
  563. [root@freenas] ~# 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  564.  
  565. CORRECT>c99 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 (y|n|e|a)? no
  566. 199: Command not found.
  567. [root@freenas] ~# 00 Multi_Zone_Error_Rate ---R-- 200 001 000 - 0
  568. 00: Command not found.
  569. [root@freenas] ~# ||||||_ K auto-keep
  570. Invalid null command.
  571. [root@freenas] ~# |||||__ C event count
  572. Invalid null command.
  573. [root@freenas] ~# ||||___ R error rate
  574. Invalid null command.
  575. [root@freenas] ~# *******************
  576. 193 2015-08-18 21:48 37 ******************
  577. ... ..( 60 skipped). .. ******************
  578. 254 |||____ S speed/performance
  579. Invalid null command.
  580. [root@freenas] ~# ||_____ O updated online
  581. Invalid null command.
  582. [root@freenas] ~# |______ P prefailure warning
  583. Invalid null command.
  584. [root@freenas] ~#
  585. [root@freenas] ~# General Purpose Log Directory Version 1
  586. General: Command not found.
  587. [root@freenas] ~# SMART Log Directory Version 1 [multi-sector log support]
  588. SMART: Command not found.
  589. [root@freenas] ~# Address Access R/W Size Description
  590. Address: Command not found.
  591. [root@freenas] ~# 0x00 GPL,SL R/O 1 Log Directory
  592. 0x00: Command not found.
  593. [root@freenas] ~# 0x01 SL R/O 1 Summary SMART error log
  594. 0x01: Command not found.
  595. [root@freenas] ~# 0x02 SL R/O 5 Comprehensive SMART error log
  596. 0x02: Command not found.
  597. [root@freenas] ~# 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  598. 0x03: Command not found.
  599. [root@freenas] ~# 0x06 SL R/O 1 SMART self-test log
  600. 0x06: Command not found.
  601. [root@freenas] ~# 0x07 GPL R/O 1 Extended self-test log
  602. 0x07: Command not found.
  603. [root@freenas] ~# 0x09 SL R/W 1 Selective self-test log
  604. 0x09: Command not found.
  605. [root@freenas] ~# 0x10 GPL R/O 1 NCQ Command Error log
  606. 0x10: Command not found.
  607. [root@freenas] ~# 0x11 GPL R/O 1 SATA Phy Event Counters
  608. 0x11: Command not found.
  609. [root@freenas] ~# 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  610. 0x80-0x9f: Command not found.
  611. [root@freenas] ~# 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
  612. 0xa0-0xa7: Command not found.
  613. [root@freenas] ~# 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
  614. 0xa8-0xb5: Command not found.
  615. [root@freenas] ~# 0xb6 GPL VS 1 Device vendor specific log
  616. 0xb6: Command not found.
  617. [root@freenas] ~# 0xb7 GPL,SL VS 1 Device vendor specific log
  618. 0xb7: Command not found.
  619. [root@freenas] ~# 2015-08-18 22:49 37 ******************
  620.  
  621. SCT Error Recovery Control command not supported
  622.  
  623. Device Statistics (GP Log 0x04) not supported
  624.  
  625. SATA Phy Event Counters (GP Log 0x11)
  626. ID Size Value Description
  627. 0x0001 2 0 Command failed due to ICRC error
  628. 0x0002 2 0 R_ERR response for data FIS
  629. 0x0003 2 0 R_ERR response for device-to-host data FIS
  630. 0x0004 2 0 R_ERR response for host-to-device data FIS
  631. 0x0005 2 0 R_ERR response for non-data FIS
  632. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  633. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  634. 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
  635. 0x000b 2 0 CRC errors within host-to-device FIS
  636. 0x8000 4 459780 Vendor specific
  637. 0xbd GPL,SL VS 1 Device vendor specific log
  638. 0xbd: Command not found.
  639. [root@freenas] ~# 0xc0 GPL,SL VS 1 Device vendor specific log
  640. 0xc0: Command not found.
  641. [root@freenas] ~# 0xc1 GPL VS 24 Device vendor specific log
  642. 0xc1: Command not found.
  643. [root@freenas] ~# 0xe0 GPL,SL R/W 1 SCT Command/Status
  644. 0xe0: Command not found.
  645. [root@freenas] ~# 0xe1 GPL,SL R/W 1 SCT Data Transfer
  646. 0xe1: Command not found.
  647. [root@freenas] ~#
  648. [root@freenas] ~# SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  649. Badly placed ()'s.
  650. [root@freenas] ~# No Errors Logged
  651. No: Command not found.
  652. [root@freenas] ~#
  653. [root@freenas] ~# SMART Extended Self-test Log Version: 1 (1 sectors)
  654. Badly placed ()'s.
  655. [root@freenas] ~# Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  656.  
  657. CORRECT>sum Test_Description Status Remaining LifeTime(hours) LBA_of_first_error (y|n|e|a)? no
  658. Badly placed ()'s.
  659. [root@freenas] ~# 1 Short offline Completed without error 00% 40859 -
  660. 1: Command not found.
  661. [root@freenas] ~# # 2 Short offline Completed without error 00% 40811 -
  662. #: Command not found.
  663. [root@freenas] ~# # 3 Short offline Completed without error 00% 40765 -
  664. #: Command not found.
  665. [root@freenas] ~# # 4 Short offline Completed without error 00% 40718 -
  666. #: Command not found.
  667. [root@freenas] ~# # 5 Short offline Completed without error 00% 40670 -
  668. #: Command not found.
  669. [root@freenas] ~# # 6 Short offline Completed without error 00% 40623 -
  670. #: Command not found.
  671. [root@freenas] ~# # 7 Short offline Completed without error 00% 40576 -
  672. #: Command not found.
  673. [root@freenas] ~# # 8 Short offline Completed without error 00% 40529 -
  674. #: Command not found.
  675. [root@freenas] ~# # 9 Short offline Completed without error 00% 40482 -
  676. #: Command not found.
  677. [root@freenas] ~# #10 Short offline Completed without error 00% 40459 -
  678. #10: Command not found.
  679. [root@freenas] ~# #11 Short offline Completed without error 00% 40412 -
  680. #11: Command not found.
  681. [root@freenas] ~# #12 Short offline Completed without error 00% 40365 -
  682. #12: Command not found.
  683. [root@freenas] ~# #13 Short offline Completed without error 00% 40317 -
  684. #13: Command not found.
  685. [root@freenas] ~# #14 Short offline Completed without error 00% 40270 -
  686. #14: Command not found.
  687. [root@freenas] ~# #15 Short offline Completed without error 00% 40227 -
  688. #15: Command not found.
  689. [root@freenas] ~# #16 Short offline Completed without error 00% 40179 -
  690. #16: Command not found.
  691. [root@freenas] ~# #17 Short offline Completed without error 00% 40132 -
  692. #17: Command not found.
  693. [root@freenas] ~#
  694. [root@freenas] ~# SMART Selective self-test log data structure revision number 1
  695. SMART: Command not found.
  696. [root@freenas] ~# SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  697. SPAN: Command not found.
  698. [root@freenas] ~# 1 0 0 Not_testing
  699. 1: Command not found.
  700. [root@freenas] ~# 2 0 0 Not_testing
  701. 2: Command not found.
  702. [root@freenas] ~# 3 0 0 Not_testing
  703. 3: Command not found.
  704. [root@freenas] ~# 4 0 0 Not_testing
  705. 4: Command not found.
  706. [root@freenas] ~# 5 0 0 Not_testing
  707. 5: Command not found.
  708. [root@freenas] ~# Selective self-test flags (0x0):
  709. Badly placed ()'s.
  710. [root@freenas] ~# After scanning selected spans, do NOT read-scan remainder of disk.
  711. After: Command not found.
  712. [root@freenas] ~# If Selective self-test is pending on power-up, resume after 0 minute delay.
  713.  
  714. CORRECT>lf Selective self-test is pending on power-up, resume after 0 minute delay. (y|n|e|a)? no
  715. If: Command not found.
  716. [root@freenas] ~# SCT Status Version: 2
  717. SCT: Command not found.
  718. [root@freenas] ~# SCT Version (vendor specific): 258 (0x0102)
  719. Badly placed (.
  720. [root@freenas] ~# SCT Support Level: 1
  721. SCT: Command not found.
  722. [root@freenas] ~# Device State: Unknown (16)
  723. Badly placed ()'s.
  724. [root@freenas] ~# Current Temperature: 38 Celsius
  725. Current: Command not found.
  726. [root@freenas] ~# Power Cycle Min/Max Temperature: 37/41 Celsius
  727. Power: Command not found.
  728. [root@freenas] ~# Lifetime Min/Max Temperature: ?/66 Celsius
  729. Lifetime: No match.
  730. [root@freenas] ~# Under/Over Temperature Limit Count: 0/0
  731. Under/Over: Command not found.
  732. [root@freenas] ~#
  733. [root@freenas] ~# SCT Temperature History Version: 2
  734. SCT: Command not found.
  735. [root@freenas] ~# Temperature Sampling Period: 1 minute
  736. Temperature: Command not found.
  737. [root@freenas] ~# Temperature Logging Interval: 1 minute
  738. Temperature: Command not found.
  739. [root@freenas] ~# Min/Max recommended Temperature: 0/60 Celsius
  740. Min/Max: Command not found.
  741. [root@freenas] ~# Min/Max Temperature Limit: -41/85 Celsius
  742. Min/Max: Command not found.
  743. [root@freenas] ~# Temperature History Size (Index): 478 (254)
  744. Badly placed (.
  745. [root@freenas] ~#
  746. [root@freenas] ~# Index Estimated Time Temperature Celsius
  747. Index: Command not found.
  748. [root@freenas] ~# 255 2015-08-18 14:52 37 ******************
  749. 255: Command not found.
  750. [root@freenas] ~# ... ..( 3 skipped). .. ******************
  751.  
  752. CORRECT> .. ..( 3 skipped). .. ****************** (y|n|e|a)? yes
  753. Badly placed ()'s.
  754. [root@freenas] ~# 259 2015-08-18 14:56 37 ******************
  755. 259: Command not found.
  756. [root@freenas] ~# 260 2015-08-18 14:57 38 *******************
  757. 260: Command not found.
  758. [root@freenas] ~# ... ..( 2 skipped). .. *******************
  759.  
  760. CORRECT> .. ..( 2 skipped). .. ******************* (y|n|e|a)? yes
  761. Badly placed ()'s.
  762. [root@freenas] ~# 263 2015-08-18 15:00 38 *******************
  763. 263: Command not found.
  764. [root@freenas] ~# 264 2015-08-18 15:01 39 ********************
  765. 264: Command not found.
  766. [root@freenas] ~# ... ..( 2 skipped). .. ********************
  767.  
  768. CORRECT> .. ..( 2 skipped). .. ******************** (y|n|e|a)? yes
  769. Badly placed ()'s.
  770. [root@freenas] ~# 267 2015-08-18 15:04 39 ********************
  771. 267: Command not found.
  772. [root@freenas] ~# 268 2015-08-18 15:05 38 *******************
  773. 268: Command not found.
  774. [root@freenas] ~# ... ..( 15 skipped). .. *******************
  775.  
  776. CORRECT> .. ..( 15 skipped). .. ******************* (y|n|e|a)? yes
  777. Badly placed ()'s.
  778. [root@freenas] ~# 284 2015-08-18 15:21 38 *******************
  779. 284: Command not found.
  780. [root@freenas] ~# 285 2015-08-18 15:22 39 ********************
  781. 285: Command not found.
  782. [root@freenas] ~# ... ..( 7 skipped). .. ********************
  783.  
  784. CORRECT> .. ..( 7 skipped). .. ******************** (y|n|e|a)? yes
  785. Badly placed ()'s.
  786. [root@freenas] ~# 293 2015-08-18 15:30 39 ********************
  787. 293: Command not found.
  788. [root@freenas] ~# 294 2015-08-18 15:31 40 *********************
  789. 294: Command not found.
  790. [root@freenas] ~# ... ..( 3 skipped). .. *********************
  791.  
  792. CORRECT> .. ..( 3 skipped). .. ********************* (y|n|e|a)? yes
  793. Badly placed ()'s.
  794. [root@freenas] ~# 298 2015-08-18 15:35 40 *********************
  795. 298: Command not found.
  796. [root@freenas] ~# 299 2015-08-18 15:36 39 ********************
  797.  
  798. CORRECT> c99 2015-08-18 15:36 39 ******************** (y|n|e|a)? yes
  799. c99: /usr/bin/cc: No such file or directory
  800. [root@freenas] ~# ... ..( 7 skipped). .. ********************
  801.  
  802. CORRECT>.. ..( 7 skipped). .. ******************** (y|n|e|a)? yes
  803. Badly placed ()'s.
  804. [root@freenas] ~# 307 2015-08-18 15:44 39 ********************
  805. 307: Command not found.
  806. [root@freenas] ~# 308 2015-08-18 15:45 38 *******************
  807. 308: Command not found.
  808. [root@freenas] ~# ... ..( 4 skipped). .. *******************
  809.  
  810. CORRECT> .. ..( 4 skipped). .. ******************* (y|n|e|a)? yes
  811. Badly placed ()'s.
  812. [root@freenas] ~# 313 2015-08-18 15:50 38 *******************
  813. 313: Command not found.
  814. [root@freenas] ~# 314 2015-08-18 15:51 39 ********************
  815. 314: Command not found.
  816. [root@freenas] ~# ... ..( 8 skipped). .. ********************
  817.  
  818. CORRECT> .. ..( 8 skipped). .. ******************** (y|n|e|a)? yes
  819. Badly placed ()'s.
  820. [root@freenas] ~# 323 2015-08-18 16:00 39 ********************
  821. 323: Command not found.
  822. [root@freenas] ~# 324 2015-08-18 16:01 40 *********************
  823. 324: Command not found.
  824. [root@freenas] ~# ... ..( 3 skipped). .. *********************
  825.  
  826. CORRECT> .. ..( 3 skipped). .. ********************* (y|n|e|a)? yes
  827. Badly placed ()'s.
  828. [root@freenas] ~# 328 2015-08-18 16:05 40 *********************
  829. 328: Command not found.
  830. [root@freenas] ~# 329 2015-08-18 16:06 39 ********************
  831. 329: Command not found.
  832. [root@freenas] ~# ... ..( 6 skipped). .. ********************
  833.  
  834. CORRECT> .. ..( 6 skipped). .. ******************** (y|n|e|a)? yes
  835. Badly placed ()'s.
  836. [root@freenas] ~# 336 2015-08-18 16:13 39 ********************
  837. 336: Command not found.
  838. [root@freenas] ~# 337 2015-08-18 16:14 38 *******************
  839. 337: Command not found.
  840. [root@freenas] ~# ... ..( 6 skipped). .. *******************
  841.  
  842. CORRECT> .. ..( 6 skipped). .. ******************* (y|n|e|a)? yes
  843. Badly placed ()'s.
  844. [root@freenas] ~# 344 2015-08-18 16:21 38 *******************
  845. 344: Command not found.
  846. [root@freenas] ~# 345 2015-08-18 16:22 39 ********************
  847. 345: Command not found.
  848. [root@freenas] ~# ... ..( 17 skipped). .. ********************
  849.  
  850. CORRECT> .. ..( 17 skipped). .. ******************** (y|n|e|a)? yes
  851. Badly placed ()'s.
  852. [root@freenas] ~# 363 2015-08-18 16:40 39 ********************
  853. 363: Command not found.
  854. [root@freenas] ~# 364 2015-08-18 16:41 38 *******************
  855. 364: Command not found.
  856. [root@freenas] ~# ... ..( 11 skipped). .. *******************
  857.  
  858. CORRECT> .. ..( 11 skipped). .. ******************* (y|n|e|a)? yes
  859. Badly placed ()'s.
  860. [root@freenas] ~# 376 2015-08-18 16:53 38 *******************
  861. 376: Command not found.
  862. [root@freenas] ~# 377 2015-08-18 16:54 39 ********************
  863. 377: Command not found.
  864. [root@freenas] ~# ... ..( 10 skipped). .. ********************
  865.  
  866. CORRECT> .. ..( 10 skipped). .. ******************** (y|n|e|a)? yes
  867. Badly placed ()'s.
  868. [root@freenas] ~# 388 2015-08-18 17:05 39 ********************
  869. 388: Command not found.
  870. [root@freenas] ~# 389 2015-08-18 17:06 38 *******************
  871.  
  872. CORRECT> c89 2015-08-18 17:06 38 ******************* (y|n|e|a)? yes
  873. c89: execv(/usr/bin/cc): No such file or directory
  874. [root@freenas] ~# ... ..( 19 skipped). .. *******************
  875.  
  876. CORRECT>.. ..( 19 skipped). .. ******************* (y|n|e|a)? yes
  877. Badly placed ()'s.
  878. [root@freenas] ~# 409 2015-08-18 17:26 38 *******************
  879. 409: Command not found.
  880. [root@freenas] ~# 410 2015-08-18 17:27 39 ********************
  881. 410: Command not found.
  882. [root@freenas] ~# ... ..( 8 skipped). .. ********************
  883.  
  884. CORRECT> .. ..( 8 skipped). .. ******************** (y|n|e|a)? yes
  885. Badly placed ()'s.
  886. [root@freenas] ~# 419 2015-08-18 17:36 39 ********************
  887. 419: Command not found.
  888. [root@freenas] ~# 420 2015-08-18 17:37 38 *******************
  889. 420: Command not found.
  890. [root@freenas] ~# ... ..( 19 skipped). .. *******************
  891.  
  892. CORRECT> .. ..( 19 skipped). .. ******************* (y|n|e|a)? yes
  893. Badly placed ()'s.
  894. [root@freenas] ~# 440 2015-08-18 17:57 38 *******************
  895. 440: Command not found.
  896. [root@freenas] ~# 441 2015-08-18 17:58 39 ********************
  897. 441: Command not found.
  898. [root@freenas] ~# ... ..( 7 skipped). .. ********************
  899.  
  900. CORRECT> .. ..( 7 skipped). .. ******************** (y|n|e|a)? yes
  901. Badly placed ()'s.
  902. [root@freenas] ~# 449 2015-08-18 18:06 39 ********************
  903. 449: Command not found.
  904. [root@freenas] ~# 450 2015-08-18 18:07 38 *******************
  905. 450: Command not found.
  906. [root@freenas] ~# ... ..( 21 skipped). .. *******************
  907.  
  908. CORRECT> .. ..( 21 skipped). .. ******************* (y|n|e|a)? yes
  909. Badly placed ()'s.
  910. [root@freenas] ~# 472 2015-08-18 18:29 38 *******************
  911. 472: Command not found.
  912. [root@freenas] ~# 473 2015-08-18 18:30 39 ********************
  913. 473: Command not found.
  914. [root@freenas] ~# ... ..( 3 skipped). .. ********************
  915.  
  916. CORRECT> .. ..( 3 skipped). .. ******************** (y|n|e|a)? yes
  917. Badly placed ()'s.
  918. [root@freenas] ~# 477 2015-08-18 18:34 39 ********************
  919. 477: Command not found.
  920. [root@freenas] ~# 0 2015-08-18 18:35 38 *******************
  921. 0: Command not found.
  922. [root@freenas] ~# ... ..(191 skipped). .. *******************
  923.  
  924. CORRECT> .. ..(191 skipped). .. ******************* (y|n|e|a)? yes
  925. Badly placed ()'s.
  926. [root@freenas] ~# 192 2015-08-18 21:47 38 *******************
  927. 192: Command not found.
  928. [root@freenas] ~# 193 2015-08-18 21:48 37 ******************
  929. 193: Command not found.
  930. [root@freenas] ~# ... ..( 60 skipped). .. ******************
  931.  
  932. CORRECT> .. ..( 60 skipped). .. ****************** (y|n|e|a)? yes
  933. Badly placed ()'s.
  934. [root@freenas] ~# 254 2015-08-18 22:49 37 ******************
  935. 254: Command not found.
  936. [root@freenas] ~#
  937. [root@freenas] ~# SCT Error Recovery Control command not supported
  938. SCT: Command not found.
  939. [root@freenas] ~#
  940. [root@freenas] ~# Device Statistics (GP Log 0x04) not supported
  941. Badly placed ()'s.
  942. [root@freenas] ~#
  943. [root@freenas] ~# SATA Phy Event Counters (GP Log 0x11)
  944. Badly placed ()'s.
  945. [root@freenas] ~# ID Size Value Description
  946. ID: Command not found.
  947. [root@freenas] ~# 0x0001 2 0 Command failed due to ICRC error
  948. 0x0001: Command not found.
  949. [root@freenas] ~# 0x0002 2 0 R_ERR response for data FIS
  950. 0x0002: Command not found.
  951. [root@freenas] ~# 0x0003 2 0 R_ERR response for device-to-host data FIS
  952. 0x0003: Command not found.
  953. [root@freenas] ~# 0x0004 2 0 R_ERR response for host-to-device data FIS
  954. 0x0004: Command not found.
  955. [root@freenas] ~# 0x0005 2 0 R_ERR response for non-data FIS
  956. 0x0005: Command not found.
  957. [root@freenas] ~# 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  958. 0x0006: Command not found.
  959. [root@freenas] ~# 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  960. 0x0007: Command not found.
  961. [root@freenas] ~# 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
  962. 0x000a: Command not found.
  963. [root@freenas] ~# 0x000b 2 0 CRC errors within host-to-device FIS
  964. 0x000b: Command not found.
  965. [root@freenas] ~# 0x8000 4 459780 Vendor specific
  966. 0x8000: Command not found.
  967. [root@freenas] ~# [root@freenas] ~# smartctl -x -qnoserial /dev/ada3
  968. [root@freenas]: No match.
  969. [root@freenas] ~# smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
  970. Badly placed ()'s.
  971. [root@freenas] ~# Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  972. Badly placed ()'s.
  973. [root@freenas] ~#
  974. AAM feature is: Disabled
  975. [root@freenas] ~# === START OF INFORMATION SECTION ===
  976. ===: Command not found.
  977. [root@freenas] ~# Model Family: Western Digital Caviar Black
  978. Model: Command not found.
  979. [root@freenas] ~# Device Model: WDC WD2001FASS-00U0B0
  980. Device: Command not found.
  981. [root@freenas] ~# APM feature is: Disabled
  982. Firmware Version: 01.00101
  983. Firmware: Command not found.
  984. [root@freenas] ~# User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  985. User: Command not found.
  986. [root@freenas] ~# Rd look-ahead is: Enabled
  987. Write cache is: Enabled
  988. ATA Security is: Disabled, frozen [SEC2]
  989. Wt Cache Reorder: Enabled
  990.  
  991. === START OF READ SMART DATA SECTION ===
  992. SMART overall-health self-assessment test result: PASSED
  993.  
  994. General SMART Values:
  995. Offline data collection status: (0x84) Offline data collection activity
  996. was suspended by an interrupting command from host.
  997. Auto Offline Data Collection: Enabled.
  998. Sector Size: 512 bytes logical/physical
  999. Sector: Command not found.
  1000. Self-test execution status: ( 0) The previous self-test routine completed
  1001. without error or no self-test has ever
  1002. been run.
  1003. Total time to complete Offline
  1004. [root@freenas] ~# Rotation Rate: 7200 rpm
  1005. Rotation: Command not found.
  1006. [root@freenas] ~# Device is: In smartctl database [for details use: -P show]
  1007. Device: Command not found.
  1008. [root@freenas] ~# ATA Version is: ATA8-ACS (minor revision not indicated)
  1009. Badly placed ()'s.
  1010. [root@freenas] ~# SATA Version is: SATA 2.6, 3.0 Gb/s
  1011. SATA: Command not found.
  1012. [root@freenas] ~# Local Time is: Tue Aug 18 22:49:13 2015 EDT
  1013. Local: Command not found.
  1014. [root@freenas] ~# SMART support is: Available - device has SMART capability.
  1015. SMART: Command not found.
  1016. [root@freenas] ~# SMART support is: Enabled
  1017. SMART: Command not found.
  1018. [root@freenas] ~# AAM feature is: Disabled
  1019. AAM: Command not found.
  1020. [root@freenas] ~# APM feature is: Disabled
  1021. APM: Command not found.
  1022. [root@freenas] ~# Rd look-ahead is: Enabled
  1023.  
  1024. CORRECT>od look-ahead is: Enabled (y|n|e|a)? no
  1025. Rd: Command not found.
  1026. [root@freenas] ~# data collection: (31560) seconds.
  1027. Offline data collection
  1028. capabilities: (0x7b) SMART execute Offline immediate.
  1029. Auto Offline data collection on/off support.
  1030. Suspend Offline collection upon new
  1031. command.
  1032. Offline surface scan supported.
  1033. Self-test supported.
  1034. Conveyance Self-test supported.
  1035. Selective Self-test supported.
  1036. SMART capabilities: (0x0003) Saves SMART data before entering
  1037. power-saving mode.
  1038. Supports SMART auto save timer.
  1039. rite cache is: Enabled
  1040.  
  1041. CORRECT>write cache is: Enabled (y|n|e|a)? Error logging capability: (0x01) Error logging supported.
  1042. General Purpose Logging supported.
  1043. Short self-test routine
  1044. recommended polling time: ( 2) minutes.
  1045. no
  1046. Extended self-test routine
  1047. rite: Command not found.
  1048. [root@freenas] ~# TA Security is: Disabled, frozen [SEC2]
  1049. TA: No match.
  1050. [root@freenas] ~# Wt Cache Reorder: Enabled
  1051.  
  1052. CORRECT>mt Cache Reorder: Enabled (y|n|e|a)? no
  1053. Wt: Command not found.
  1054. [root@freenas] ~# === START OF READ SMART DATA SECTION ===
  1055. ===: Command not found.
  1056. [root@freenas] ~# SMART overall-health self-assessment test result: PASSED
  1057. SMART: Command not found.
  1058. [root@freenas] ~#
  1059. [root@freenas] ~# General SMART Values:
  1060. General: Command not found.
  1061. [root@freenas] ~# Offline data collection status: (0x84) Offline data collection activity
  1062. Badly placed ()'s.
  1063. [root@freenas] ~# was suspended by an interrupting command from host.
  1064.  
  1065. CORRECT> as suspended by an interrupting command from host. (y|n|e|a)? yes
  1066. recommended polling time: ( 361) minutes.
  1067. Conveyance self-test routine
  1068. recommended polling time: ( 5) minutes.
  1069. SCT capabilities: (0x3037) SCT Status supported.
  1070. SCT Feature Control supported.
  1071. SCT Data Table supported.
  1072.  
  1073. SMART Attributes Data Structure revision number: 16
  1074. Vendor Specific SMART Attributes with Thresholds:
  1075. Assembler messages:
  1076. Error: can't open suspended for reading: No such file or directory
  1077. suspended:0: Error: can't open by for reading: No such file or directory
  1078. by:0: Error: can't open an for reading: No such file or directory
  1079. an:0: Error: can't open interrupting for reading: No such file or directory
  1080. interrupting:0: Error: can't open command for reading: No such file or directory
  1081. command:0: Error: can't open from for reading: No such file or directory
  1082. from:0: Error: can't open host. for reading: No such file or directory
  1083. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  1084. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
  1085. 3 Spin_Up_Time POS--K 098 040 021 - 12141
  1086. 4 Start_Stop_Count -O--CK 100 100 000 - 212
  1087. 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  1088. 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
  1089. 9 Power_On_Hours -O--CK 044 044 000 - 40902
  1090. 10 Spin_Retry_Count -O--CK 100 100 000 - 0
  1091. 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
  1092. 12 Power_Cycle_Count -O--CK 100 100 000 - 210
  1093. 192 Power-Off_Retract_Count -O--CK 200 200 000 - 155
  1094. 193 Load_Cycle_Count -O--CK 132 132 000 - 205532
  1095. 194 Temperature_Celsius -O---K 114 086 000 - 38
  1096. 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  1097. 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  1098. 198 Offline_Uncorrectable ----CK 200 200 000 - 0
  1099. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  1100. 200 Multi_Zone_Error_Rate ---R-- 200 001 000 - 0
  1101. ||||||_ K auto-keep
  1102. |||||__ C event count
  1103. ||||___ R error rate
  1104. [root@freenas] ~# Auto Offline Data Collection: Enabled.
  1105. Auto: Command not found.
  1106. |||____ S speed/performance
  1107. [root@freenas] ~# ||_____ O updated online
  1108. Self-test execution status: ( 0) The previous self-test routine completed
  1109. Badly placed ()'s.
  1110. [root@freenas] ~# without error or no self-test has ever
  1111. without: Command not found.
  1112. [root@freenas] ~# been run.
  1113. been: Command not found.
  1114. [root@freenas] ~# Total time to complete Offline
  1115. Total: Command not found.
  1116. [root@freenas] ~# data collection: (31560) seconds.
  1117.  
  1118. CORRECT>date collection: (31560) seconds. (y|n|e|a)? no
  1119. Badly placed ()'s.
  1120. [root@freenas] ~# ffline data collection
  1121. ffline: Command not found.
  1122. [root@freenas] ~# capabilities: (0x7b) SMART execute Offline immediate.
  1123. Badly placed ()'s.
  1124. [root@freenas] ~# Auto Offline data collection on/off support.
  1125. Auto: Command not found.
  1126. [root@freenas] ~# |______ P prefailure warning
  1127.  
  1128. General Purpose Log Directory Version 1
  1129. SMART Log Directory Version 1 [multi-sector log support]
  1130. Address Access R/W Size Description
  1131. 0x00 GPL,SL R/O 1 Log Directory
  1132. 0x01 SL R/O 1 Summary SMART error log
  1133. 0x02 SL R/O 5 Comprehensive SMART error log
  1134. 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  1135. 0x06 SL R/O 1 SMART self-test log
  1136. 0x07 GPL R/O 1 Extended self-test log
  1137. Suspend Offline collection upon new
  1138.  
  1139. CORRECT> suspend Offline collection upon new (y|n|e|a)? yes
  1140. 0x09 SL R/W 1 Selective self-test log
  1141. 0x10 GPL R/O 1 NCQ Command Error log
  1142. 0x11 GPL R/O 1 SATA Phy Event Counters
  1143. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  1144. 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
  1145. 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
  1146. suspend: Too many arguments.
  1147. 0xb6 GPL VS 1 Device vendor specific log
  1148. 0xb7 GPL,SL VS 1 Device vendor specific log
  1149. [root@freenas] ~# command.
  1150.  
  1151. CORRECT> command (y|n|e|a)? yes
  1152. 0xbd GPL,SL VS 1 Device vendor specific log
  1153. 0xc0 GPL,SL VS 1 Device vendor specific log
  1154. 0xc1 GPL VS 24 Device vendor specific log
  1155. 0xe0 GPL,SL R/W 1 SCT Command/Status
  1156. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  1157.  
  1158. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  1159. No Errors Logged
  1160.  
  1161. SMART Extended Self-test Log Version: 1 (1 sectors)
  1162. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  1163. # 1 Short offline Completed without error 00% 40859 -
  1164. [root@freenas] ~# Offline surface scan supported.
  1165. Offline: Command not found.
  1166. [root@freenas] ~# # 2 Short offline Completed without error 00% 40811 -
  1167. # 3 Short offline Completed without error 00% 40765 -
  1168. # 4 Short offline Completed without error 00% 40718 -
  1169. # 5 Short offline Completed without error 00% 40670 -
  1170. # 6 Short offline Completed without error 00% 40623 -
  1171. # 7 Short offline Completed without error 00% 40576 -
  1172. Self-test supported.
  1173. # 8 Short offline Completed without error 00% 40529 -
  1174. # 9 Short offline Completed without error 00% 40482 -
  1175. #10 Short offline Completed without error 00% 40459 -
  1176. #11 Short offline Completed without error 00% 40412 -
  1177. #12 Short offline Completed without error 00% 40365 -
  1178. #13 Short offline Completed without error 00% 40317 -
  1179. #14 Short offline Completed without error 00% 40270 -
  1180. #15 Short offline Completed without error 00% 40227 -
  1181. #16 Short offline Completed without error 00% 40179 -
  1182. #17 Short offline Completed without error 00% 40132 -
  1183.  
  1184. SMART Selective self-test log data structure revision number 1
  1185. Self-test: Command not found.
  1186. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  1187. 1 0 0 Not_testing
  1188. 2 0 0 Not_testing
  1189. 3 0 0 Not_testing
  1190. 4 0 0 Not_testing
  1191. 5 0 0 Not_testing
  1192. Selective self-test flags (0x0):
  1193. [root@freenas] ~# Conveyance Self-test supported.
  1194. Conveyance: Command not found.
  1195. [root@freenas] ~# After scanning selected spans, do NOT read-scan remainder of disk.
  1196. If Selective self-test is pending on power-up, resume after 0 minute delay.
  1197.  
  1198. SCT Status Version: 2
  1199. SCT Version (vendor specific): 258 (0x0102)
  1200. SCT Support Level: 1
  1201. Device State: Unknown (16)
  1202. Selective Self-test supported.
  1203. Selective: Command not found.
  1204. [root@freenas] ~# SMART capabilities: (0x0003) Saves SMART data before entering
  1205. Badly placed ()'s.
  1206. [root@freenas] ~# power-saving mode.
  1207. power-saving: Command not found.
  1208. [root@freenas] ~# Supports SMART auto save timer.
  1209. Supports: Command not found.
  1210. [root@freenas] ~# Error logging capability: (0x01) Error logging supported.
  1211. Badly placed ()'s.
  1212. [root@freenas] ~# General Purpose Logging supported.
  1213. General: Command not found.
  1214. [root@freenas] ~# Short self-test routine
  1215. Short: Command not found.
  1216. [root@freenas] ~# recommended polling time: ( 2) minutes.
  1217. Badly placed ()'s.
  1218. [root@freenas] ~# Extended self-test routine
  1219. Extended: Command not found.
  1220. [root@freenas] ~# recommended polling time: ( 361) minutes.
  1221. Badly placed ()'s.
  1222. [root@freenas] ~# Current Temperature: 38 Celsius
  1223. Power Cycle Min/Max Temperature: 37/41 Celsius
  1224. Lifetime Min/Max Temperature: ?/66 Celsius
  1225. Under/Over Temperature Limit Count: 0/0
  1226.  
  1227. SCT Temperature History Version: 2
  1228. Temperature Sampling Period: 1 minute
  1229. Temperature Logging Interval: 1 minute
  1230. Min/Max recommended Temperature: 0/60 Celsius
  1231. Min/Max Temperature Limit: -41/85 Celsius
  1232. Temperature History Size (Index): 478 (254)
  1233.  
  1234. Index Estimated Time Temperature Celsius
  1235. 255 2015-08-18 14:52 37 ******************
  1236. ... ..( 3 skipped). .. ******************
  1237. 259 2015-08-18 14:56 37 ******************
  1238. 260 2015-08-18 14:57 38 *******************
  1239. Conveyance self-test routine
  1240. ... ..( 2 skipped). .. *******************
  1241. 263 2015-08-18 15:00 38 *******************
  1242. 264 2015-08-18 15:01 39 ********************
  1243. ... ..( 2 skipped). .. ********************
  1244. 267 2015-08-18 15:04 39 ********************
  1245. 268 2015-08-18 15:05 38 *******************
  1246. ... ..( 15 skipped). .. *******************
  1247. 284 2015-08-18 15:21 38 *******************
  1248. 285 2015-08-18 15:22 39 ********************
  1249. Conveyance: Command not found.
  1250. ... ..( 7 skipped). .. ********************
  1251. 293 2015-08-18 15:30 39 ********************
  1252. 294 2015-08-18 15:31 40 *********************
  1253. ... ..( 3 skipped). .. *********************
  1254. 298 2015-08-18 15:35 40 *********************
  1255. 299 2015-08-18 15:36 39 ********************
  1256. [root@freenas] ~# recommended polling time: ( 5) minutes.
  1257. Badly placed ()'s.
  1258. [root@freenas] ~# SCT capabilities: (0x3037) SCT Status supported.
  1259. Badly placed ()'s.
  1260. [root@freenas] ~# SCT Feature Control supported.
  1261. SCT: Command not found.
  1262. [root@freenas] ~# SCT Data Table supported.
  1263. SCT: Command not found.
  1264. [root@freenas] ~#
  1265. [root@freenas] ~# SMART Attributes Data Structure revision number: 16
  1266. SMART: Command not found.
  1267. [root@freenas] ~# Vendor Specific SMART Attributes with Thresholds:
  1268. Vendor: Command not found.
  1269. [root@freenas] ~# ... ..( 7 skipped). .. ********************
  1270. 307 2015-08-18 15:44 39 ********************
  1271. 308 2015-08-18 15:45 38 *******************
  1272. ... ..( 4 skipped). .. *******************
  1273. 313 2015-08-18 15:50 38 *******************
  1274. 314 2015-08-18 15:51 39 ********************
  1275. ... ..( 8 skipped). .. ********************
  1276. 323 2015-08-18 16:00 39 ********************
  1277. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  1278. ID#: Command not found.
  1279. 324 2015-08-18 16:01 40 *********************
  1280. ... ..( 3 skipped). .. *********************
  1281. 328 2015-08-18 16:05 40 *********************
  1282. 329 2015-08-18 16:06 39 ********************
  1283. ... ..( 6 skipped). .. ********************
  1284. 336 2015-08-18 16:13 39 ********************
  1285. 337 2015-08-18 16:14 38 *******************
  1286. ... ..( 6 skipped). .. *******************
  1287. 344 2015-08-18 16:21 38 *******************
  1288. 345 2015-08-18 16:22 39 ********************
  1289. ... ..( 17 skipped). .. ********************
  1290. 363 2015-08-18 16:40 39 ********************
  1291. [root@freenas] ~# 364 2015-08-18 16:41 38 *******************
  1292. ... ..( 11 skipped). .. *******************
  1293. 376 2015-08-18 16:53 38 *******************
  1294. 377 2015-08-18 16:54 39 ********************
  1295. ... ..( 10 skipped). .. ********************
  1296. 388 2015-08-18 17:0 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
  1297. 1: Command not found.
  1298. [root@freenas] ~# 3 Spin_Up_Time POS--K 098 040 021 - 12141
  1299. 3: Command not found.
  1300. [root@freenas] ~# 5 39 ********************
  1301. 389 2015-08-18 17:06 38 *******************
  1302. ... ..( 19 skipped). .. ************** 4 Start_Stop_Count -O--CK 100 100 000 - 212
  1303. 4: Command not found.
  1304. [root@freenas] ~# 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  1305. 5: Command not found.
  1306. [root@freenas] ~# *****
  1307. 409 2015-08-18 17:26 38 *******************
  1308. 410 2015-08-18 17:27 39 ********************
  1309. ... ..( 8 sk 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
  1310. 7: Command not found.
  1311. [root@freenas] ~# 9 Power_On_Hours -O--CK 044 044 000 - 40902
  1312. 9: Command not found.
  1313. [root@freenas] ~# ipped). .. ********************
  1314. 419 2015-08-18 17:36 39 ********************
  1315. 10 Spin_Retry_Count -O--CK 100 100 000 - 0
  1316. 10: Command not found.
  1317. [root@freenas] ~# 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
  1318. 11: Command not found.
  1319. [root@freenas] ~# 420 2015-08-18 17:37 38 *******************
  1320. ... ..( 19 skipped). .. *******************
  1321. 440 2015-08-18 17:57 38 *******************
  1322. 441 201 12 Power_Cycle_Count -O--CK 100 100 000 - 210
  1323. 12: Command not found.
  1324. [root@freenas] ~# 192 Power-Off_Retract_Count -O--CK 200 200 000 - 155
  1325. 192: Command not found.
  1326. [root@freenas] ~# 5-08-18 17:58 39 ********************
  1327. ... ..( 7 skipped). .. ********************
  1328. 449 2015-08-18 18:06 39 *193 Load_Cycle_Count -O--CK 132 132 000 - 205532
  1329. 193: Command not found.
  1330. [root@freenas] ~# 194 Temperature_Celsius -O---K 114 086 000 - 38
  1331. 194: Command not found.
  1332. [root@freenas] ~# *******************
  1333. 450 2015-08-18 18:07 38 *******************
  1334. ... ..( 21 skipped). .. *******************
  1335. 472196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  1336. 196: Command not found.
  1337. [root@freenas] ~# 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  1338. 197: Command not found.
  1339. [root@freenas] ~# 2015-08-18 18:29 38 *******************
  1340. 473 2015-08-18 18:30 39 ********************
  1341. ... ..( 3 skipped). 198 Offline_Uncorrectable ----CK 200 200 000 - 0
  1342. 198: Command not found.
  1343. [root@freenas] ~# 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  1344.  
  1345. CORRECT>c99 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 (y|n|e|a)? no
  1346. 199: Command not found.
  1347. [root@freenas] ~# .. ********************
  1348. 477 2015-08-18 18:34 39 ********************
  1349. 0 2015-08-18 18:35 38 *****************00 Multi_Zone_Error_Rate ---R-- 200 001 000 - 0
  1350. 00: Command not found.
  1351. [root@freenas] ~# ||||||_ K auto-keep
  1352. Invalid null command.
  1353. [root@freenas] ~# **
  1354. ... ..(191 skipped). .. *******************
  1355. 192 2015-08-18 21:47 38 *******************
  1356. 193 2015-08-18 21 |||||__ C event count
  1357. Invalid null command.
  1358. [root@freenas] ~# ||||___ R error rate
  1359. Invalid null command.
  1360. [root@freenas] ~# |||____ S speed/performance
  1361. Invalid null command.
  1362. [root@freenas] ~# :48 37 ******************
  1363. ... ..( 60 skipped). .. ******************
  1364. 254 2015-08-18 22:49 37 *************** ||_____ O updated online
  1365. Invalid null command.
  1366. [root@freenas] ~# |______ P prefailure warning
  1367. Invalid null command.
  1368. [root@freenas] ~#
  1369. [root@freenas] ~# ***
  1370.  
  1371. SCT Error Recovery Control command not supported
  1372.  
  1373. Device Statistics (GP Log 0x04) not supported
  1374.  
  1375. SATA Phy Event Counters (GGeneral Purpose Log Directory Version 1
  1376. General: Command not found.
  1377. [root@freenas] ~# SMART Log Directory Version 1 [multi-sector log support]
  1378. SMART: Command not found.
  1379. [root@freenas] ~# P Log 0x11)
  1380. ID Size Value Description
  1381. 0x0001 2 0 Command failed due to ICRC error
  1382. 0x0002 2 0 Address Access R/W Size Description
  1383. Address: Command not found.
  1384. [root@freenas] ~# 0x00 GPL,SL R/O 1 Log Directory
  1385. 0x00: Command not found.
  1386. [root@freenas] ~# 0x01 SL R/O 1 Summary SMART error log
  1387. 0x01: Command not found.
  1388. [root@freenas] ~# R_ERR response for data FIS
  1389. 0x0003 2 0 R_ERR response for device-to-host data FIS
  1390. 0x0004 2 0 R_ERR re0x02 SL R/O 5 Comprehensive SMART error log
  1391. 0x02: Command not found.
  1392. [root@freenas] ~# 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  1393. 0x03: Command not found.
  1394. [root@freenas] ~# sponse for host-to-device data FIS
  1395. 0x0005 2 0 R_ERR response for non-data FIS
  1396. 0x0006 2 0 R_ERR respons0x06 SL R/O 1 SMART self-test log
  1397. 0x06: Command not found.
  1398. [root@freenas] ~# 0x07 GPL R/O 1 Extended self-test log
  1399. 0x07: Command not found.
  1400. [root@freenas] ~# e for device-to-host non-data FIS
  1401. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  1402. 0x000a 2 2 0x09 SL R/W 1 Selective self-test log
  1403. 0x09: Command not found.
  1404. [root@freenas] ~# 0x10 GPL R/O 1 NCQ Command Error log
  1405. 0x10: Command not found.
  1406. [root@freenas] ~# 0x11 GPL R/O 1 SATA Phy Event Counters
  1407. 0x11: Command not found.
  1408. [root@freenas] ~# Device-to-host register FISes sent due to a COMRESET
  1409. 0x000b 2 0 CRC errors within host-to-device FIS
  1410. 0x8000 4 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  1411. 0x80-0x9f: Command not found.
  1412. [root@freenas] ~# 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
  1413. 0xa0-0xa7: Command not found.
  1414. [root@freenas] ~# 459780 Vendor specific
  1415. 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
  1416. 0xa8-0xb5: Command not found.
  1417. [root@freenas] ~# 0xb6 GPL VS 1 Device vendor specific log
  1418. 0xb6: Command not found.
  1419. [root@freenas] ~# 0xb7 GPL,SL VS 1 Device vendor specific log
  1420. 0xb7: Command not found.
  1421. [root@freenas] ~# 0xbd GPL,SL VS 1 Device vendor specific log
  1422. 0xbd: Command not found.
  1423. [root@freenas] ~# 0xc0 GPL,SL VS 1 Device vendor specific log
  1424. 0xc0: Command not found.
  1425. [root@freenas] ~# 0xc1 GPL VS 24 Device vendor specific log
  1426. 0xc1: Command not found.
  1427. [root@freenas] ~# 0xe0 GPL,SL R/W 1 SCT Command/Status
  1428. 0xe0: Command not found.
  1429. [root@freenas] ~# 0xe1 GPL,SL R/W 1 SCT Data Transfer
  1430. 0xe1: Command not found.
  1431. [root@freenas] ~#
  1432. [root@freenas] ~# SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  1433. Badly placed ()'s.
  1434. [root@freenas] ~# No Errors Logged
  1435. No: Command not found.
  1436. [root@freenas] ~#
  1437. [root@freenas] ~# SMART Extended Self-test Log Version: 1 (1 sectors)
  1438. Badly placed ()'s.
  1439. [root@freenas] ~# Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  1440.  
  1441. CORRECT>sum Test_Description Status Remaining LifeTime(hours) LBA_of_first_error (y|n|e|a)? no
  1442. Badly placed ()'s.
  1443. [root@freenas] ~# 1 Short offline Completed without error 00% 40859 -
  1444. 1: Command not found.
  1445. [root@freenas] ~# # 2 Short offline Completed without error 00% 40811 -
  1446. #: Command not found.
  1447. [root@freenas] ~# # 3 Short offline Completed without error 00% 40765 -
  1448. #: Command not found.
  1449. [root@freenas] ~# # 4 Short offline Completed without error 00% 40718 -
  1450. #: Command not found.
  1451. [root@freenas] ~# # 5 Short offline Completed without error 00% 40670 -
  1452. #: Command not found.
  1453. [root@freenas] ~# # 6 Short offline Completed without error 00% 40623 -
  1454. #: Command not found.
  1455. [root@freenas] ~# # 7 Short offline Completed without error 00% 40576 -
  1456. #: Command not found.
  1457. [root@freenas] ~# # 8 Short offline Completed without error 00% 40529 -
  1458. #: Command not found.
  1459. [root@freenas] ~# # 9 Short offline Completed without error 00% 40482 -
  1460. #: Command not found.
  1461. [root@freenas] ~# #10 Short offline Completed without error 00% 40459 -
  1462. #10: Command not found.
  1463. [root@freenas] ~# #11 Short offline Completed without error 00% 40412 -
  1464. #11: Command not found.
  1465. [root@freenas] ~# #12 Short offline Completed without error 00% 40365 -
  1466. #12: Command not found.
  1467. [root@freenas] ~# #13 Short offline Completed without error 00% 40317 -
  1468. #13: Command not found.
  1469. [root@freenas] ~# #14 Short offline Completed without error 00% 40270 -
  1470. #14: Command not found.
  1471. [root@freenas] ~# #15 Short offline Completed without error 00% 40227 -
  1472. #15: Command not found.
  1473. [root@freenas] ~# #16 Short offline Completed without error 00% 40179 -
  1474. #16: Command not found.
  1475. [root@freenas] ~# #17 Short offline Completed without error 00% 40132 -
  1476. #17: Command not found.
  1477. [root@freenas] ~#
  1478. [root@freenas] ~# SMART Selective self-test log data structure revision number 1
  1479. SMART: Command not found.
  1480. [root@freenas] ~# SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  1481. SPAN: Command not found.
  1482. [root@freenas] ~# 1 0 0 Not_testing
  1483. 1: Command not found.
  1484. [root@freenas] ~# 2 0 0 Not_testing
  1485. 2: Command not found.
  1486. [root@freenas] ~# 3 0 0 Not_testing
  1487. 3: Command not found.
  1488. [root@freenas] ~# 4 0 0 Not_testing
  1489. 4: Command not found.
  1490. [root@freenas] ~# 5 0 0 Not_testing
  1491. 5: Command not found.
  1492. [root@freenas] ~# Selective self-test flags (0x0):
  1493. Badly placed ()'s.
  1494. [root@freenas] ~# After scanning selected spans, do NOT read-scan remainder of disk.
  1495. After: Command not found.
  1496. [root@freenas] ~# If Selective self-test is pending on power-up, resume after 0 minute delay.
  1497.  
  1498. CORRECT>lf Selective self-test is pending on power-up, resume after 0 minute delay. (y|n|e|a)? no
  1499. If: Command not found.
  1500. [root@freenas] ~# SCT Status Version: 2
  1501. SCT: Command not found.
  1502. [root@freenas] ~# SCT Version (vendor specific): 258 (0x0102)
  1503. Badly placed (.
  1504. [root@freenas] ~# SCT Support Level: 1
  1505. SCT: Command not found.
  1506. [root@freenas] ~# Device State: Unknown (16)
  1507. Badly placed ()'s.
  1508. [root@freenas] ~# Current Temperature: 38 Celsius
  1509. Current: Command not found.
  1510. [root@freenas] ~# Power Cycle Min/Max Temperature: 37/41 Celsius
  1511. Power: Command not found.
  1512. [root@freenas] ~# Lifetime Min/Max Temperature: ?/66 Celsius
  1513. Lifetime: No match.
  1514. [root@freenas] ~# Under/Over Temperature Limit Count: 0/0
  1515. Under/Over: Command not found.
  1516. [root@freenas] ~#
  1517. [root@freenas] ~# SCT Temperature History Version: 2
  1518. SCT: Command not found.
  1519. [root@freenas] ~# Temperature Sampling Period: 1 minute
  1520. Temperature: Command not found.
  1521. [root@freenas] ~# Temperature Logging Interval: 1 minute
  1522. Temperature: Command not found.
  1523. [root@freenas] ~# Min/Max recommended Temperature: 0/60 Celsius
  1524. Min/Max: Command not found.
  1525. [root@freenas] ~# Min/Max Temperature Limit: -41/85 Celsius
  1526. Min/Max: Command not found.
  1527. [root@freenas] ~# Temperature History Size (Index): 478 (254)
  1528. Badly placed (.
  1529. [root@freenas] ~#
  1530. [root@freenas] ~# Index Estimated Time Temperature Celsius
  1531. Index: Command not found.
  1532. [root@freenas] ~# 255 2015-08-18 14:52 37 ******************
  1533. 255: Command not found.
  1534. [root@freenas] ~# ... ..( 3 skipped). .. ******************
  1535.  
  1536. CORRECT> .. ..( 3 skipped). .. ****************** (y|n|e|a)? yes
  1537. Badly placed ()'s.
  1538. [root@freenas] ~# 259 2015-08-18 14:56 37 ******************
  1539. 259: Command not found.
  1540. [root@freenas] ~# 260 2015-08-18 14:57 38 *******************
  1541. 260: Command not found.
  1542. [root@freenas] ~# ... ..( 2 skipped). .. *******************
  1543.  
  1544. CORRECT> .. ..( 2 skipped). .. ******************* (y|n|e|a)? yes
  1545. Badly placed ()'s.
  1546. [root@freenas] ~# 263 2015-08-18 15:00 38 *******************
  1547. 263: Command not found.
  1548. [root@freenas] ~# 264 2015-08-18 15:01 39 ********************
  1549. 264: Command not found.
  1550. [root@freenas] ~# ... ..( 2 skipped). .. ********************
  1551.  
  1552. CORRECT> .. ..( 2 skipped). .. ******************** (y|n|e|a)? yes
  1553. Badly placed ()'s.
  1554. [root@freenas] ~# 267 2015-08-18 15:04 39 ********************
  1555. 267: Command not found.
  1556. [root@freenas] ~# 268 2015-08-18 15:05 38 *******************
  1557. 268: Command not found.
  1558. [root@freenas] ~# ... ..( 15 skipped). .. *******************
  1559.  
  1560. CORRECT> .. ..( 15 skipped). .. ******************* (y|n|e|a)? yes
  1561. Badly placed ()'s.
  1562. [root@freenas] ~# 284 2015-08-18 15:21 38 *******************
  1563. 284: Command not found.
  1564. [root@freenas] ~# 285 2015-08-18 15:22 39 ********************
  1565. 285: Command not found.
  1566. [root@freenas] ~# ... ..( 7 skipped). .. ********************
  1567.  
  1568. CORRECT> .. ..( 7 skipped). .. ******************** (y|n|e|a)? yes
  1569. Badly placed ()'s.
  1570. [root@freenas] ~# 293 2015-08-18 15:30 39 ********************
  1571. 293: Command not found.
  1572. [root@freenas] ~# 294 2015-08-18 15:31 40 *********************
  1573. 294: Command not found.
  1574. [root@freenas] ~# ... ..( 3 skipped). .. *********************
  1575.  
  1576. CORRECT> .. ..( 3 skipped). .. ********************* (y|n|e|a)? yes
  1577. Badly placed ()'s.
  1578. [root@freenas] ~# 298 2015-08-18 15:35 40 *********************
  1579. 298: Command not found.
  1580. [root@freenas] ~# 299 2015-08-18 15:36 39 ********************
  1581.  
  1582. CORRECT> c99 2015-08-18 15:36 39 ******************** (y|n|e|a)? yes
  1583. c99: /usr/bin/cc: No such file or directory
  1584. [root@freenas] ~# ... ..( 7 skipped). .. ********************
  1585.  
  1586. CORRECT>.. ..( 7 skipped). .. ******************** (y|n|e|a)? yes
  1587. Badly placed ()'s.
  1588. [root@freenas] ~# 307 2015-08-18 15:44 39 ********************
  1589. 307: Command not found.
  1590. [root@freenas] ~# 308 2015-08-18 15:45 38 *******************
  1591. 308: Command not found.
  1592. [root@freenas] ~# ... ..( 4 skipped). .. *******************
  1593.  
  1594. CORRECT> .. ..( 4 skipped). .. ******************* (y|n|e|a)? yes
  1595. Badly placed ()'s.
  1596. [root@freenas] ~# 313 2015-08-18 15:50 38 *******************
  1597. 313: Command not found.
  1598. [root@freenas] ~# 314 2015-08-18 15:51 39 ********************
  1599. 314: Command not found.
  1600. [root@freenas] ~# ... ..( 8 skipped). .. ********************
  1601.  
  1602. CORRECT> .. ..( 8 skipped). .. ******************** (y|n|e|a)? yes
  1603. Badly placed ()'s.
  1604. [root@freenas] ~# 323 2015-08-18 16:00 39 ********************
  1605. 323: Command not found.
  1606. [root@freenas] ~# 324 2015-08-18 16:01 40 *********************
  1607. 324: Command not found.
  1608. [root@freenas] ~# ... ..( 3 skipped). .. *********************
  1609.  
  1610. CORRECT> .. ..( 3 skipped). .. ********************* (y|n|e|a)? yes
  1611. Badly placed ()'s.
  1612. [root@freenas] ~# 328 2015-08-18 16:05 40 *********************
  1613. 328: Command not found.
  1614. [root@freenas] ~# 329 2015-08-18 16:06 39 ********************
  1615. 329: Command not found.
  1616. [root@freenas] ~# ... ..( 6 skipped). .. ********************
  1617.  
  1618. CORRECT> .. ..( 6 skipped). .. ******************** (y|n|e|a)? yes
  1619. Badly placed ()'s.
  1620. [root@freenas] ~# 336 2015-08-18 16:13 39 ********************
  1621. 336: Command not found.
  1622. [root@freenas] ~# 337 2015-08-18 16:14 38 *******************
  1623. 337: Command not found.
  1624. [root@freenas] ~# ... ..( 6 skipped). .. *******************
  1625.  
  1626. CORRECT> .. ..( 6 skipped). .. ******************* (y|n|e|a)? yes
  1627. Badly placed ()'s.
  1628. [root@freenas] ~# 344 2015-08-18 16:21 38 *******************
  1629. 344: Command not found.
  1630. [root@freenas] ~# 345 2015-08-18 16:22 39 ********************
  1631. 345: Command not found.
  1632. [root@freenas] ~# ... ..( 17 skipped). .. ********************
  1633.  
  1634. CORRECT> .. ..( 17 skipped). .. ******************** (y|n|e|a)? yes
  1635. Badly placed ()'s.
  1636. [root@freenas] ~# 363 2015-08-18 16:40 39 ********************
  1637. 363: Command not found.
  1638. [root@freenas] ~# 364 2015-08-18 16:41 38 *******************
  1639. 364: Command not found.
  1640. [root@freenas] ~# ... ..( 11 skipped). .. *******************
  1641.  
  1642. CORRECT> .. ..( 11 skipped). .. ******************* (y|n|e|a)? yes
  1643. Badly placed ()'s.
  1644. [root@freenas] ~# 376 2015-08-18 16:53 38 *******************
  1645. 376: Command not found.
  1646. [root@freenas] ~# 377 2015-08-18 16:54 39 ********************
  1647. 377: Command not found.
  1648. [root@freenas] ~# ... ..( 10 skipped). .. ********************
  1649.  
  1650. CORRECT> .. ..( 10 skipped). .. ******************** (y|n|e|a)? yes
  1651. Badly placed ()'s.
  1652. [root@freenas] ~# 388 2015-08-18 17:05 39 ********************
  1653. 388: Command not found.
  1654. [root@freenas] ~# 389 2015-08-18 17:06 38 *******************
  1655.  
  1656. CORRECT> c89 2015-08-18 17:06 38 ******************* (y|n|e|a)? yes
  1657. c89: execv(/usr/bin/cc): No such file or directory
  1658. [root@freenas] ~# ... ..( 19 skipped). .. *******************
  1659.  
  1660. CORRECT>.. ..( 19 skipped). .. ******************* (y|n|e|a)? yes
  1661. Badly placed ()'s.
  1662. [root@freenas] ~# 409 2015-08-18 17:26 38 *******************
  1663. 409: Command not found.
  1664. [root@freenas] ~# 410 2015-08-18 17:27 39 ********************
  1665. 410: Command not found.
  1666. [root@freenas] ~# ... ..( 8 skipped). .. ********************
  1667.  
  1668. CORRECT> .. ..( 8 skipped). .. ******************** (y|n|e|a)? yes
  1669. Badly placed ()'s.
  1670. [root@freenas] ~# 419 2015-08-18 17:36 39 ********************
  1671. 419: Command not found.
  1672. [root@freenas] ~# 420 2015-08-18 17:37 38 *******************
  1673. 420: Command not found.
  1674. [root@freenas] ~# ... ..( 19 skipped). .. *******************
  1675.  
  1676. CORRECT> .. ..( 19 skipped). .. ******************* (y|n|e|a)? yes
  1677. Badly placed ()'s.
  1678. [root@freenas] ~# 440 2015-08-18 17:57 38 *******************
  1679. 440: Command not found.
  1680. [root@freenas] ~# 441 2015-08-18 17:58 39 ********************
  1681. 441: Command not found.
  1682. [root@freenas] ~# ... ..( 7 skipped). .. ********************
  1683.  
  1684. CORRECT> .. ..( 7 skipped). .. ******************** (y|n|e|a)? yes
  1685. Badly placed ()'s.
  1686. [root@freenas] ~# 449 2015-08-18 18:06 39 ********************
  1687. 449: Command not found.
  1688. [root@freenas] ~# 450 2015-08-18 18:07 38 *******************
  1689. 450: Command not found.
  1690. [root@freenas] ~# ... ..( 21 skipped). .. *******************
  1691.  
  1692. CORRECT> .. ..( 21 skipped). .. ******************* (y|n|e|a)? yes
  1693. Badly placed ()'s.
  1694. [root@freenas] ~# 472 2015-08-18 18:29 38 *******************
  1695. 472: Command not found.
  1696. [root@freenas] ~# 473 2015-08-18 18:30 39 ********************
  1697. 473: Command not found.
  1698. [root@freenas] ~# ... ..( 3 skipped). .. ********************
  1699.  
  1700. CORRECT> .. ..( 3 skipped). .. ******************** (y|n|e|a)? yes
  1701. Badly placed ()'s.
  1702. [root@freenas] ~# 477 2015-08-18 18:34 39 ********************
  1703. 477: Command not found.
  1704. [root@freenas] ~# 0 2015-08-18 18:35 38 *******************
  1705. 0: Command not found.
  1706. [root@freenas] ~# ... ..(191 skipped). .. *******************
  1707.  
  1708. CORRECT> .. ..(191 skipped). .. ******************* (y|n|e|a)? yes
  1709. Badly placed ()'s.
  1710. [root@freenas] ~# 192 2015-08-18 21:47 38 *******************
  1711. 192: Command not found.
  1712. [root@freenas] ~# 193 2015-08-18 21:48 37 ******************
  1713. 193: Command not found.
  1714. [root@freenas] ~# ... ..( 60 skipped). .. ******************
  1715.  
  1716. CORRECT> .. ..( 60 skipped). .. ****************** (y|n|e|a)? yes
  1717. Badly placed ()'s.
  1718. [root@freenas] ~# 254 2015-08-18 22:49 37 ******************
  1719. 254: Command not found.
  1720. [root@freenas] ~#
  1721. [root@freenas] ~# SCT Error Recovery Control command not supported
  1722. SCT: Command not found.
  1723. [root@freenas] ~#
  1724. [root@freenas] ~# Device Statistics (GP Log 0x04) not supported
  1725. Badly placed ()'s.
  1726. [root@freenas] ~#
  1727. [root@freenas] ~# SATA Phy Event Counters (GP Log 0x11)
  1728. Badly placed ()'s.
  1729. [root@freenas] ~# ID Size Value Description
  1730. ID: Command not found.
  1731. [root@freenas] ~# 0x0001 2 0 Command failed due to ICRC error
  1732. 0x0001: Command not found.
  1733. [root@freenas] ~# 0x0002 2 0 R_ERR response for data FIS
  1734. 0x0002: Command not found.
  1735. [root@freenas] ~# 0x0003 2 0 R_ERR response for device-to-host data FIS
  1736. 0x0003: Command not found.
  1737. [root@freenas] ~# 0x0004 2 0 R_ERR response for host-to-device data FIS
  1738. 0x0004: Command not found.
  1739. [root@freenas] ~# 0x0005 2 0 R_ERR response for non-data FIS
  1740. 0x0005: Command not found.
  1741. [root@freenas] ~# 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  1742. 0x0006: Command not found.
  1743. [root@freenas] ~# 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  1744. 0x0007: Command not found.
  1745. [root@freenas] ~# 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
  1746. 0x000a: Command not found.
  1747. [root@freenas] ~# 0x000b 2 0 CRC errors within host-to-device FIS
  1748. 0x000b: Command not found.
  1749. [root@freenas] ~# 0x8000 4 459780 Vendor specific
  1750. 0x8000: Command not found.
  1751. [root@freenas] ~#
  1752. [root@freenas] ~#
  1753. [root@freenas] ~#
');