[ 0.000000] Linux version 3.4.82 (root@puppypc30311) (gcc version 4.7.1 (GCC) ) #1 SMP Mon Mar 3 17:15:25 EST 2014
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f680000 (usable)
[ 0.000000] BIOS-e820: 000000001f680000 - 000000001f68b000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001f68b000 - 000000001f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Matsushita Electric Industrial Co.,Ltd. CF-W5KWUAXP/CFW5-1, BIOS V1.00L15 08/07/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1f680 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 01F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] found SMP MP-table at [c00f8380] f8380
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000001f680000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001f400000 page 2M
[ 0.000000] 001f400000 - 001f680000 page 4k
[ 0.000000] kernel direct mapping tables up to 0x1f67ffff @ [mem 0x017f8000-0x017fffff]
[ 0.000000] ACPI: RSDP 000f8350 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 1f685430 00048 (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 1f68ae46 00084 (v02 MATBIO CFW5-1 06040000 MEI 0000005A)
[ 0.000000] ACPI: DSDT 1f685caa 0519C (v01 MATBIO CFW5-1 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 1f68bfc0 00040
[ 0.000000] ACPI: HPET 1f68aeca 00038 (v01 MATBIO CFW5-1 06040000 MEI 0000005A)
[ 0.000000] ACPI: APIC 1f68af02 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 1f68af6a 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 1f68afa6 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: TCPA 1f68afce 00032 (v01 MATBIO CFW5-1 06040000 MEI 00000001)
[ 0.000000] ACPI: SSDT 1f685b44 00166 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 1f68596e 001D6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.000000] ACPI: SSDT 1f685478 004F6 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 502MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f680000
[ 0.000000] low ram: 0 - 1f680000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001f680
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001f680
[ 0.000000] On node 0 totalpages: 128527
[ 0.000000] free_area_init_node: node 0, pgdat c1521480, node_mem_map df28f200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 973 pages used for memmap
[ 0.000000] Normal zone: 123571 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages/cpu @df275000 s24576 r0 d20480 u45056
[ 0.000000] pcpu-alloc: s24576 r0 d20480 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127522
[ 0.000000] Kernel command line: video=640x480 root=/dev/sda1 pmedia=atahd
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 503536k/514560k available (3617k kernel code, 10572k reserved, 1656k data, 476k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xdfe80000 - 0xff7fe000 ( 505 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf680000 ( 502 MB)
[ 0.000000] .init : 0xc1527000 - 0xc159e000 ( 476 kB)
[ 0.000000] .data : 0xc138877b - 0xc1526a40 (1656 kB)
[ 0.000000] .text : 0xc1000000 - 0xc138877b (3617 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=dec06000 soft=dec08000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1064.088 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 2129.85 BogoMIPS (lpj=3546960)
[ 0.003344] pid_max: default: 32768 minimum: 301
[ 0.003430] Mount-cache hash table entries: 512
[ 0.003770] Disabled fast string operations
[ 0.003780] mce: CPU supports 6 MCE banks
[ 0.003795] CPU0: Thermal monitoring handled by SMI
[ 0.003801] using mwait in idle threads.
[ 0.003914] SMP alternatives: switching to UP code
[ 0.012734] ACPI: Core revision 20120320
[ 0.020059] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020549] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053722] CPU0: Genuine Intel(R) CPU U1300 @ 1.06GHz stepping 08
[ 0.056663] APIC calibration not consistent with PM-Timer: 173ms instead of 100ms
[ 0.056663] APIC delta adjusted to PM-Timer: 831249 (1440828)
[ 0.056663] Performance Events: Core events, core PMU driver.
[ 0.056663] ... version: 1
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 0
[ 0.056663] ... event mask: 0000000000000003
[ 0.056663] Brought up 1 CPUs
[ 0.056663] Total of 1 processors activated (2129.85 BogoMIPS).
[ 0.056663] devtmpfs: initialized
[ 0.056663] PM: Registering ACPI NVS region [mem 0x1f68b000-0x1f6fffff] (479232 bytes)
[ 0.056663] dummy:
[ 0.056663] NET: Registered protocol family 16
[ 0.056663] EISA bus registered
[ 0.056663] ACPI: bus type pci registered
[ 0.056663] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.056663] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.056663] PCI: Using MMCONFIG for extended config space
[ 0.056663] PCI: Using configuration type 1 for base access
[ 0.058549] bio: create slab <bio-0> at 0
[ 0.058659] ACPI: Added _OSI(Module Device)
[ 0.058664] ACPI: Added _OSI(Processor Device)
[ 0.058669] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.058674] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.059867] ACPI: EC: Look up EC in DSDT
[ 0.063063] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.170056] ACPI: Interpreter enabled
[ 0.170103] ACPI: (supports S0 S3 S4 S5)
[ 0.170136] ACPI: Using IOAPIC for interrupt routing
[ 0.187858] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[ 0.188173] ACPI: No dock devices found.
[ 0.188191] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.188755] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.189803] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.189809] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.189816] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.189823] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.189829] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.189835] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.189842] pci_root PNP0A08:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.189849] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[ 0.189855] PCI: root bus 00: using default resources
[ 0.189898] PCI host bridge to bus 0000:00
[ 0.189904] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.189910] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.189929] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 0.190010] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[ 0.190030] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff]
[ 0.190041] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.190053] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.190064] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff]
[ 0.190131] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.190147] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff]
[ 0.190291] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.190323] pci 0000:00:1b.0: reg 10: [mem 0xd0340000-0xd0343fff 64bit]
[ 0.190459] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.190502] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.190644] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.190691] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.190832] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.190881] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.190956] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.191015] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.191089] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.191148] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.191222] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.191297] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.191331] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff]
[ 0.191469] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.191506] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.191630] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.191756] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.191767] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.191775] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[ 0.191847] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.191872] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.191890] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.191907] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.191925] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.191943] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.192007] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.192088] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
[ 0.192222] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.192426] pci 0000:03:00.0: [8086:4222] type 00 class 0x028000
[ 0.192489] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xd0000fff]
[ 0.192932] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.193002] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.193048] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.193060] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.193134] pci 0000:04:01.0: [10ec:8139] type 00 class 0x020000
[ 0.193168] pci 0000:04:01.0: reg 10: [io 0x2000-0x20ff]
[ 0.193189] pci 0000:04:01.0: reg 14: [mem 0xd0100000-0xd01000ff]
[ 0.193325] pci 0000:04:01.0: supports D1 D2
[ 0.193330] pci 0000:04:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.193373] pci 0000:04:05.0: [1180:0476] type 02 class 0x060700
[ 0.193407] pci 0000:04:05.0: reg 10: [mem 0xd0101000-0xd0101fff]
[ 0.193459] pci 0000:04:05.0: supports D1 D2
[ 0.193464] pci 0000:04:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193500] pci 0000:04:05.1: [1180:0822] type 00 class 0x080500
[ 0.193532] pci 0000:04:05.1: reg 10: [mem 0xd0100400-0xd01004ff]
[ 0.193664] pci 0000:04:05.1: supports D1 D2
[ 0.193669] pci 0000:04:05.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193759] pci 0000:00:1e.0: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.193768] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.193777] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.193790] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.193797] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.193860] pci_bus 0000:05: [bus 05-08] partially hidden behind transparent bridge 0000:04 [bus 04-05]
[ 0.193892] pci_bus 0000:00: on NUMA node 0
[ 0.193898] ACPI: PCI Interrupt Routing Table [\\_SB_.PCI0._PRT]
[ 0.194126] ACPI: PCI Interrupt Routing Table [\\_SB_.PCI0.RP01._PRT]
[ 0.194243] ACPI: PCI Interrupt Routing Table [\\_SB_.PCI0.RP03._PRT]
[ 0.194383] ACPI: PCI Interrupt Routing Table [\\_SB_.PCI0.PCIB._PRT]
[ 0.194486] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.194493] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.194498] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.198653] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 6 7 10 11)
[ 0.198744] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 10 *11)
[ 0.198830] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 *7 10 11)
[ 0.198916] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 10 *11)
[ 0.199002] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 7 10 *11)
[ 0.199087] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 7 10 11) *0, disabled.
[ 0.199175] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10 *11)
[ 0.199261] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 *10 11)
[ 0.199374] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.199388] vgaarb: loaded
[ 0.199391] vgaarb: bridge control possible 0000:00:02.0
[ 0.199592] SCSI subsystem initialized
[ 0.199643] libata version 3.00 loaded.
[ 0.199728] usbcore: registered new interface driver usbfs
[ 0.199761] usbcore: registered new interface driver hub
[ 0.199796] usbcore: registered new device driver usb
[ 0.199887] PCI: Using ACPI for IRQ routing
[ 0.213132] PCI: pci_cache_line_size set to 64 bytes
[ 0.213240] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.213245] reserve RAM buffer: 000000001f680000 - 000000001fffffff
[ 0.213501] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.213512] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.213522] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.216704] Switching to clocksource hpet
[ 0.216777] pnp: PnP ACPI init
[ 0.216788] ACPI: bus type pnp registered
[ 0.218922] pnp 00:00: [bus 00-ff]
[ 0.218929] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.218935] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.218940] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.218946] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.218951] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.218957] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.218962] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.218968] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.218973] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.218979] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.218984] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.218990] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.218995] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.219001] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.219006] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.219012] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.219017] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.219025] pnp 00:00: [mem 0x20000000-0xfebfffff window]
[ 0.219031] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.219092] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.221001] pnp 00:01: [mem 0x000ce600-0x000ce7ff]
[ 0.221007] pnp 00:01: [mem 0x000cf800-0x000cffff]
[ 0.221065] system 00:01: [mem 0x000ce600-0x000ce7ff] has been reserved
[ 0.221072] system 00:01: [mem 0x000cf800-0x000cffff] has been reserved
[ 0.221079] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221280] pnp 00:02: [io 0x0900-0x091f]
[ 0.221286] pnp 00:02: [io 0x092c-0x097f]
[ 0.221291] pnp 00:02: [io 0xfe00-0xfe01]
[ 0.221296] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.221369] system 00:02: [io 0x0900-0x091f] has been reserved
[ 0.221376] system 00:02: [io 0x092c-0x097f] has been reserved
[ 0.221382] system 00:02: [io 0xfe00-0xfe01] has been reserved
[ 0.221389] system 00:02: [mem 0xff000000-0xffffffff] has been reserved
[ 0.221396] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221420] pnp 00:03: [io 0x0000-0x001f]
[ 0.221425] pnp 00:03: [io 0x0081-0x0091]
[ 0.221430] pnp 00:03: [io 0x0093-0x009f]
[ 0.221435] pnp 00:03: [io 0x00c0-0x00df]
[ 0.221440] pnp 00:03: [dma 4]
[ 0.221483] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.221603] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.221651] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.221674] pnp 00:05: [io 0x00f0]
[ 0.221690] pnp 00:05: [irq 13]
[ 0.221733] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.221896] pnp 00:06: [io 0x0063]
[ 0.221901] pnp 00:06: [io 0x0065]
[ 0.221906] pnp 00:06: [io 0x0067]
[ 0.221910] pnp 00:06: [io 0x0070]
[ 0.221914] pnp 00:06: [io 0x0080]
[ 0.221919] pnp 00:06: [io 0x0092]
[ 0.221923] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.221928] pnp 00:06: [io 0x0800-0x080f]
[ 0.221933] pnp 00:06: [io 0x1000-0x107f]
[ 0.221937] pnp 00:06: [io 0x1180-0x11bf]
[ 0.221942] pnp 00:06: [mem 0xe0000000-0xefffffff]
[ 0.221948] pnp 00:06: [mem 0xfed14000-0xfed17fff]
[ 0.221953] pnp 00:06: [mem 0xfed18000-0xfed18fff]
[ 0.221958] pnp 00:06: [mem 0xfed19000-0xfed19fff]
[ 0.221963] pnp 00:06: [mem 0xfed1c000-0xfed1ffff]
[ 0.221968] pnp 00:06: [mem 0xfed20000-0xfed3ffff]
[ 0.221973] pnp 00:06: [mem 0xfed45000-0xfed8ffff]
[ 0.221978] pnp 00:06: [mem 0xfef00000-0xfef03fff]
[ 0.222070] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.222077] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.222083] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.222090] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.222097] system 00:06: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.222104] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.222110] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.222117] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.222124] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.222131] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.222137] system 00:06: [mem 0xfef00000-0xfef03fff] has been reserved
[ 0.222144] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.222164] pnp 00:07: [io 0x0070-0x0077]
[ 0.222174] pnp 00:07: [irq 8]
[ 0.222222] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.222243] pnp 00:08: [io 0x0061]
[ 0.222287] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.222752] pnp 00:09: [mem 0xfed40000-0xfed44fff]
[ 0.222758] pnp 00:09: [io 0x004e-0x004f]
[ 0.222763] pnp 00:09: [io 0x0920-0x092b]
[ 0.222811] pnp 00:09: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.224053] pnp 00:0a: [io 0x0060]
[ 0.224058] pnp 00:0a: [io 0x0064]
[ 0.224068] pnp 00:0a: [irq 1]
[ 0.224189] pnp 00:0a: Plug and Play ACPI device, IDs PNP0320 PNP0303 (active)
[ 0.225395] pnp 00:0b: [irq 12]
[ 0.225447] pnp 00:0b: Plug and Play ACPI device, IDs SYN0002 PNP0f13 (active)
[ 0.225676] pnp: PnP ACPI: found 12 devices
[ 0.225680] ACPI: ACPI bus type pnp unregistered
[ 0.225688] PnPBIOS: Disabled by ACPI PNP
[ 0.262375] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
[ 0.262385] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[ 0.262393] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
[ 0.262414] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
[ 0.262423] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.262451] pci 0000:04:05.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.262460] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 04-05] add_size 4000000
[ 0.262474] pci 0000:00:1e.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.262481] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.262488] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.262496] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.262503] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.262510] pci 0000:00:1c.2: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.262520] pci 0000:00:1e.0: BAR 9: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.262528] pci 0000:00:1c.0: BAR 8: assigned [mem 0x24000000-0x241fffff]
[ 0.262536] pci 0000:00:1c.0: BAR 9: assigned [mem 0x24200000-0x243fffff 64bit pref]
[ 0.262544] pci 0000:00:1c.2: BAR 9: assigned [mem 0x24400000-0x245fffff 64bit pref]
[ 0.262553] pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff]
[ 0.262560] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff]
[ 0.262568] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.262575] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.262586] pci 0000:00:1c.0: bridge window [mem 0x24000000-0x241fffff]
[ 0.262596] pci 0000:00:1c.0: bridge window [mem 0x24200000-0x243fffff 64bit pref]
[ 0.262609] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.262616] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.262626] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.262636] pci 0000:00:1c.2: bridge window [mem 0x24400000-0x245fffff 64bit pref]
[ 0.262653] pci 0000:04:05.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.262660] pci 0000:04:05.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.262667] pci 0000:04:05.0: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.262674] pci 0000:04:05.0: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.262681] pci 0000:04:05.0: BAR 9: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.262690] pci 0000:04:05.0: BAR 10: assigned [mem 0x28000000-0x2bffffff]
[ 0.262696] pci 0000:04:05.0: BAR 7: assigned [io 0x2400-0x24ff]
[ 0.262702] pci 0000:04:05.0: BAR 8: assigned [io 0x2800-0x28ff]
[ 0.262709] pci 0000:04:05.0: CardBus bridge to [bus 05-08]
[ 0.262714] pci 0000:04:05.0: bridge window [io 0x2400-0x24ff]
[ 0.262723] pci 0000:04:05.0: bridge window [io 0x2800-0x28ff]
[ 0.262733] pci 0000:04:05.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.262742] pci 0000:04:05.0: bridge window [mem 0x28000000-0x2bffffff]
[ 0.262751] pci 0000:00:1e.0: PCI bridge to [bus 04-05]
[ 0.262758] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.262769] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.262778] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.262824] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[ 0.262834] pci 0000:00:1e.0: setting latency timer to 64
[ 0.262857] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.262862] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.262868] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.262874] pci_bus 0000:02: resource 1 [mem 0x24000000-0x241fffff]
[ 0.262880] pci_bus 0000:02: resource 2 [mem 0x24200000-0x243fffff 64bit pref]
[ 0.262886] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.262892] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd00fffff]
[ 0.262898] pci_bus 0000:03: resource 2 [mem 0x24400000-0x245fffff 64bit pref]
[ 0.262904] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.262910] pci_bus 0000:04: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.262916] pci_bus 0000:04: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.262921] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
[ 0.262927] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
[ 0.262933] pci_bus 0000:05: resource 0 [io 0x2400-0x24ff]
[ 0.262938] pci_bus 0000:05: resource 1 [io 0x2800-0x28ff]
[ 0.262944] pci_bus 0000:05: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.262950] pci_bus 0000:05: resource 3 [mem 0x28000000-0x2bffffff]
[ 0.263030] NET: Registered protocol family 2
[ 0.263142] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.263380] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.263531] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.263677] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.263682] TCP: reno registered
[ 0.263687] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.263699] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.263784] NET: Registered protocol family 1
[ 0.263805] pci 0000:00:02.0: Boot video device
[ 0.263992] PCI: CLS 64 bytes, default 64
[ 0.264128] Simple Boot Flag at 0x46 set to 0x1
[ 0.264987] NTFS driver 2.1.30 [Flags: R/W].
[ 0.265084] msgmni has been set to 983
[ 0.265298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.265304] io scheduler noop registered
[ 0.265322] io scheduler cfq registered (default)
[ 0.265493] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.265662] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 0.265798] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.266002] intel_idle: does not run on family 6 model 14
[ 0.266018] isapnp: Scanning for PnP cards...
[ 0.623378] isapnp: No Plug & Play device found
[ 0.636279] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.637148] Non-volatile memory driver v1.3
[ 0.637192] intel_rng: FWH not detected
[ 0.639074] brd: module loaded
[ 0.640121] loop: module loaded
[ 0.640477] ata_piix 0000:00:1f.1: version 2.13
[ 0.640553] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.640917] scsi0 : ata_piix
[ 0.641014] scsi1 : ata_piix
[ 0.641629] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.641635] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.643147] Fixed MDIO Bus: probed
[ 0.643151] Fusion MPT base driver 3.04.20
[ 0.643154] Copyright (c) 1999-2008 LSI Corporation
[ 0.643167] Fusion MPT SPI Host driver 3.04.20
[ 0.643198] Fusion MPT FC Host driver 3.04.20
[ 0.643235] Fusion MPT SAS Host driver 3.04.20
[ 0.643269] Fusion MPT misc device (ioctl) driver 3.04.20
[ 0.643329] mptctl: Registered with Fusion MPT base driver
[ 0.643353] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 0.643368] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.643422] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.643429] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.643442] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.643474] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.643492] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.647400] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.647613] ata2: port disabled--ignoring
[ 0.647652] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
[ 0.656687] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.656743] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.656748] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.656754] usb usb1: Product: EHCI Host Controller
[ 0.656759] usb usb1: Manufacturer: Linux 3.4.82 ehci_hcd
[ 0.656764] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.656922] hub 1-0:1.0: USB hub found
[ 0.656931] hub 1-0:1.0: 6 ports detected
[ 0.657100] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.657137] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.657178] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.657185] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.657195] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.657231] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.657286] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.657292] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.657298] usb usb2: Product: UHCI Host Controller
[ 0.657302] usb usb2: Manufacturer: Linux 3.4.82 uhci_hcd
[ 0.657307] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.657450] hub 2-0:1.0: USB hub found
[ 0.657458] hub 2-0:1.0: 2 ports detected
[ 0.657583] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.657590] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.657600] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.657650] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.657709] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.657714] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.657720] usb usb3: Product: UHCI Host Controller
[ 0.657724] usb usb3: Manufacturer: Linux 3.4.82 uhci_hcd
[ 0.657729] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.657870] hub 3-0:1.0: USB hub found
[ 0.657878] hub 3-0:1.0: 2 ports detected
[ 0.658003] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.658011] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.658023] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.658072] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.658124] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.658130] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.658135] usb usb4: Product: UHCI Host Controller
[ 0.658140] usb usb4: Manufacturer: Linux 3.4.82 uhci_hcd
[ 0.658145] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.658280] hub 4-0:1.0: USB hub found
[ 0.658287] hub 4-0:1.0: 2 ports detected
[ 0.658526] Initializing USB Mass Storage driver...
[ 0.658595] usbcore: registered new interface driver usb-storage
[ 0.658598] USB Mass Storage support registered.
[ 0.658662] usbcore: registered new interface driver libusual
[ 0.658681] usbcore: registered new interface driver ums-alauda
[ 0.658700] usbcore: registered new interface driver ums-datafab
[ 0.658719] usbcore: registered new interface driver ums_eneub6250
[ 0.658737] usbcore: registered new interface driver ums-freecom
[ 0.658757] usbcore: registered new interface driver ums-isd200
[ 0.658775] usbcore: registered new interface driver ums-jumpshot
[ 0.658799] usbcore: registered new interface driver ums-realtek
[ 0.658820] usbcore: registered new interface driver ums-sddr09
[ 0.658839] usbcore: registered new interface driver ums-sddr55
[ 0.658857] usbcore: registered new interface driver ums-usbat
[ 0.658886] usbcore: registered new interface driver ldusb
[ 0.658981] i8042: PNP: PS/2 Controller [PNP0303:K106,PNP0f13:MOU3] at 0x60,0x64 irq 1,12
[ 0.661063] i8042: Detected active multiplexing controller, rev 1.1
[ 0.662740] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.662751] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.662790] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.662826] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.662858] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.662989] mousedev: PS/2 mouse device common for all mice
[ 0.663168] rtc_cmos 00:07: RTC can wake from S4
[ 0.663358] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.663399] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.663422] md: raid0 personality registered for level 0
[ 0.663448] EISA: Probing bus 0 at eisa.0
[ 0.663458] Cannot allocate resource for EISA slot 1
[ 0.663462] Cannot allocate resource for EISA slot 2
[ 0.663466] Cannot allocate resource for EISA slot 3
[ 0.663470] Cannot allocate resource for EISA slot 4
[ 0.663496] EISA: Detected 0 cards.
[ 0.663504] cpuidle: using governor ladder
[ 0.663508] cpuidle: using governor menu
[ 0.663840] usbcore: registered new interface driver usbhid
[ 0.663843] usbhid: USB HID core driver
[ 0.663955] ashmem: initialized
[ 0.663991] Netfilter messages via NETLINK v0.30.
[ 0.664158] TCP: cubic registered
[ 0.664163] NET: Registered protocol family 17
[ 0.664174] Registering the dns_resolver key type
[ 0.664287] Using IPI No-Shortcut mode
[ 0.664404] registered taskstats version 1
[ 0.664889] rtc_cmos 00:07: setting system clock to 2014-04-08 09:23:38 UTC (1396949018)
[ 0.691794] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.807234] ata1.00: ATA-7: FUJITSU MHV2120AH, 000000A0, max UDMA/100
[ 0.807241] ata1.00: 234441648 sectors, multi 16: LBA
[ 0.820427] ata1.00: configured for UDMA/100
[ 0.820603] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120A 0000 PQ: 0 ANSI: 5
[ 0.820859] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 0.820932] sd 0:0:0:0: [sda] Write Protect is off
[ 0.820938] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.820971] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.871298] sda: sda1 sda2
[ 0.871631] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.871650] md: Waiting for all devices to be available before autodetect
[ 0.871654] md: If you don't use raid, use raid=noautodetect
[ 0.884849] md: Autodetecting RAID arrays.
[ 0.884854] md: Scanned 0 and added 0 devices.
[ 0.884857] md: autorun ...
[ 0.884860] md: ... autorun DONE.
[ 0.956208] kjournald starting. Commit interval 5 seconds
[ 0.956280] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 0.956295] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 0.963358] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[ 0.996899] devtmpfs: mounted
[ 0.996943] Freeing unused kernel memory: 476k freed
[ 1.087580] usb 1-2: New USB device found, idVendor=04da, idProduct=250a
[ 1.087587] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.087593] usb 1-2: Product: Optical Drive Controller
[ 1.087597] usb 1-2: Manufacturer: Panasonic
[ 1.087602] usb 1-2: SerialNumber: 000B97A359AB
[ 1.087955] scsi2 : usb-storage 1-2:1.0
[ 1.266689] Refined TSC clocksource calibration: 1063.999 MHz.
[ 1.266698] Switching to clocksource tsc
[ 1.495752] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x39a0b2, caps: 0xa04753/0x200000/0x0
[ 1.532589] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
[ 1.910758] EXT3-fs (sda1): using internal journal
[ 2.091114] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-833S 1.51 PQ: 0 ANSI: 0
[ 2.096726] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.096732] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.096892] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 5.740016] floppy0: no floppy controllers found
[ 5.933913] udev[142]: starting version 167
[ 6.333466] ACPI: Requesting acpi_cpufreq
[ 6.336529] Marking TSC unstable due to TSC halts in idle
[ 6.336544] ACPI: acpi_idle registered with cpuidle
[ 6.356019] Switching to clocksource hpet
[ 6.377989] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.379620] ACPI: AC Adapter [AC] (on-line)
[ 6.380342] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 6.392028] ACPI: Lid Switch [LID]
[ 6.392226] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 6.392237] ACPI: Power Button [PWRB]
[ 6.392419] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.392426] ACPI: Power Button [PWRF]
[ 6.823009] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.823017] ACPI: Thermal Zone [TZ00] (27 C)
[ 6.824457] thermal LNXTHERM:01: registered as thermal_zone1
[ 6.824463] ACPI: Thermal Zone [TZ01] (29 C)
[ 6.944483] input: Panasonic Laptop Support as /devices/virtual/input/input5
[ 6.950773] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 6.951269] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.428023] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 7.428039] ACPI: Battery Slot [BATA] (battery present)
[ 7.743838] Linux agpgart interface v0.103
[ 7.754285] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 7.754386] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 7.754929] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 7.775463] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 7.887283] [drm] Initialized drm 1.1.0 20060810
[ 7.986384] i915 0000:00:02.0: setting latency timer to 64
[ 7.993283] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.993289] [drm] Driver supports precise vblank timestamp query.
[ 7.993440] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.319297] leds_ss4200: no LED devices found
[ 8.336641] leds_ss4200: no LED devices found
[ 8.423392] [drm] initialized overlay support
[ 8.596325] yenta_cardbus 0000:04:05.0: CardBus bridge found [10f7:8338]
[ 8.622084] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.622205] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 8.678033] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 8.720858] yenta_cardbus 0000:04:05.0: ISA IRQ mask 0x0cb8, PCI irq 22
[ 8.720867] yenta_cardbus 0000:04:05.0: Socket status: 30000006
[ 8.720874] pci_bus 0000:04: Raising subordinate bus# of parent bus (#04) from #05 to #08
[ 8.720890] yenta_cardbus 0000:04:05.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 8.720897] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x24ff 0x2800-0x28ff
[ 8.841213] yenta_cardbus 0000:04:05.0: pcmcia: parent PCI bridge window: [mem 0xd0100000-0xd01fffff]
[ 8.841222] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0100000-0xd01fffff: excluding 0xd0100000-0xd010ffff
[ 8.841245] yenta_cardbus 0000:04:05.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x23ffffff pref]
[ 8.841252] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x23ffffff: excluding 0x20000000-0x23ffffff
[ 8.847387] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 8.881435] 8139too 0000:04:01.0: eth0: RealTek RTL8139 at 0x2000, 00:0b:97:a3:59:ab, IRQ 19
[ 8.895126] sdhci: Secure Digital Host Controller Interface driver
[ 8.895132] sdhci: Copyright(c) Pierre Ossman
[ 8.897285] sdhci-pci 0000:04:05.1: SDHCI controller found [1180:0822] (rev 13)
[ 8.898358] sdhci-pci 0000:04:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 8.898399] mmc0: no vmmc regulator found
[ 8.899407] sdhci-pci 0000:04:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 8.899510] Registered led device: mmc0::
[ 8.900011] sdhci-pci 0000:04:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 8.935486] mmc0: SDHCI controller on PCI [0000:04:05.1] using DMA
[ 9.222131] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 9.378925] fbcon: inteldrmfb (fb0) is primary device
[ 9.385979] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, +vsync)
[ 9.456674] sdhci-pci 0000:04:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 9.470159] Console: switching to colour frame buffer device 80x30
[ 9.473806] fb0: inteldrmfb frame buffer device
[ 9.473809] drm: registered panic notifier
[ 9.492961] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.493035] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.551452] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
[ 9.552411] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 9.553270] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 9.554357] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 9.629217] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[ 9.629306] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 9.629393] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 9.629485] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 9.639683] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 9.639695] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 9.639791] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 9.653538] clean.
[ 10.106676] sdhci-pci 0000:04:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 10.124069] fuse init (API version 7.18)
[ 10.156815] aufs 3.4-20131104
[ 10.168539] input: HDA Intel SPDIF In as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 10.168778] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.168997] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.169213] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.169434] input: HDA Intel Speaker Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.201289] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 10.968450] sdhci-pci 0000:04:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 11.785113] sdhci-pci 0000:04:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 12.056647] Adding 20629500k swap on /dev/sda2. Priority:-1 extents:1 across:20629500k
[ 12.230905] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
[ 12.231872] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 12.232737] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 12.277431] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 12.279859] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[ 12.279947] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 12.310591] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 12.310713] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 12.552074] cfg80211: Calling CRDA to update world regulatory domain
[ 12.568560] lib80211: common routines for IEEE802.11 drivers
[ 12.568567] lib80211_crypt: registered algorithm 'NULL'
[ 12.861269] 8139too 0000:04:01.0: eth0: link down
[ 13.038737] wl: module license 'MIXED/Proprietary' taints kernel.
[ 13.038744] Disabling lock debugging due to kernel taint
[ 13.176844] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 13.176851] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 13.231953] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 12 802.11a channels
[ 13.231960] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 13.232125] iwl3945 0000:03:00.0: irq 43 for MSI/MSI-X
[ 13.232570] Registered led device: phy0-led
[ 13.284934] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 13.331780] 8139too 0000:04:01.0: eth0: link down
[ 13.600128] iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2
[ 13.610525] iwl3945 0000:03:00.0: iwlwifi-3945-1.ucode firmware file req failed: -2
[ 13.610532] iwl3945 0000:03:00.0: Could not read microcode: -2
[ 13.622207] iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2
[ 13.633169] iwl3945 0000:03:00.0: iwlwifi-3945-1.ucode firmware file req failed: -2
[ 13.633177] iwl3945 0000:03:00.0: Could not read microcode: -2
[ 13.650292] 8139too 0000:04:01.0: eth0: link down
[ 15.815692] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.830109] nf_conntrack version 0.5.0 (7875 buckets, 31500 max)
[ 20.983815] [drm] Changing LVDS panel from (-hsync, +vsync) to (-hsync, -vsync)
[ 1932.724716] iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2
[ 1932.735725] iwl3945 0000:03:00.0: iwlwifi-3945-1.ucode firmware file req failed: -2
[ 1932.735733] iwl3945 0000:03:00.0: Could not read microcode: -2
[ 1932.749091] iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2
[ 1932.759790] iwl3945 0000:03:00.0: iwlwifi-3945-1.ucode firmware file req failed: -2
[ 1932.759798] iwl3945 0000:03:00.0: Could not read microcode: -2
[ 1941.514971] iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2
[ 1941.529863] iwl3945 0000:03:00.0: iwlwifi-3945-1.ucode firmware file req failed: -2
[ 1941.529871] iwl3945 0000:03:00.0: Could not read microcode: -2
[ 2430.198526] iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2
[ 2430.209636] iwl3945 0000:03:00.0: iwlwifi-3945-1.ucode firmware file req failed: -2
[ 2430.209644] iwl3945 0000:03:00.0: Could not read microcode: -2
[ 2430.223091] iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2
[ 2430.233889] iwl3945 0000:03:00.0: iwlwifi-3945-1.ucode firmware file req failed: -2
[ 2430.233897] iwl3945 0000:03:00.0: Could not read microcode: -2
[ 2586.454827] iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2
[ 2586.465754] iwl3945 0000:03:00.0: iwlwifi-3945-1.ucode firmware file req failed: -2
[ 2586.465762] iwl3945 0000:03:00.0: Could not read microcode: -2
[ 2684.782500] iwl3945 0000:03:00.0: iwlwifi-3945-2.ucode firmware file req failed: -2
[ 2684.793587] iwl3945 0000:03:00.0: iwlwifi-3945-1.ucode firmware file req failed: -2
[ 2684.793595] iwl3945 0000:03:00.0: Could not read microcode: -2