Data hosted with ♥ by Pastebin.com - Download Raw - See Original
  1. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-38-generic] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: SAMSUNG SpinPoint F2 EG
  6. Device Model: SAMSUNG HD103SI
  7. Serial Number: S1VSJ90Z128634
  8. LU WWN Device Id: 5 0024e9 201c06776
  9. Firmware Version: 1AG01118
  10. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
  14. Local Time is: Thu Nov 15 22:55:19 2018 MSK
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x00) Offline data collection activity
  23. was never started.
  24. Auto Offline Data Collection: Disabled.
  25. Self-test execution status: ( 0) The previous self-test routine completed
  26. without error or no self-test has ever
  27. been run.
  28. Total time to complete Offline
  29. data collection: (12641) seconds.
  30. Offline data collection
  31. capabilities: (0x7b) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. Offline surface scan supported.
  36. Self-test supported.
  37. Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time: ( 2) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 212) minutes.
  48. Conveyance self-test routine
  49. recommended polling time: ( 23) minutes.
  50. SCT capabilities: (0x003f) SCT Status supported.
  51. SCT Error Recovery Control supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
  59. 3 Spin_Up_Time 0x0007 082 082 011 Pre-fail Always - 6300
  60. 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2101
  61. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  62. 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
  63. 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
  64. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 606
  65. 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
  66. 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
  67. 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 617
  68. 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0
  69. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  70. 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
  71. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  72. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
  73. 190 Airflow_Temperature_Cel 0x0022 083 069 000 Old_age Always - 17 (Min/Max 17/17)
  74. 194 Temperature_Celsius 0x0022 082 068 000 Old_age Always - 18 (Min/Max 17/18)
  75. 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 8702
  76. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  77. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  78. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  79. 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
  80. 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
  81. 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0
  82.  
  83. SMART Error Log Version: 1
  84. No Errors Logged
  85.  
  86. SMART Self-test log structure revision number 1
  87. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  88.  
  89. SMART Selective self-test log data structure revision number 1
  90. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  91. 1 0 0 Not_testing
  92. 2 0 0 Not_testing
  93. 3 0 0 Not_testing
  94. 4 0 0 Not_testing
  95. 5 0 0 Not_testing
  96. Selective self-test flags (0x0):
  97. After scanning selected spans, do NOT read-scan remainder of disk.
  98. If Selective self-test is pending on power-up, resume after 0 minute delay.