Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.53-8.el6.x86_64 (ajn131@localhost.localdomain) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Tue Oct 8 23:46:17 EDT 2013
Command line: ro root=/dev/mapper/luks-f99ac8f4-dd8a-48f6-853c-d2f5788262cd rd_LUKS_UUID=luks-3cac8466-a0bc-4f79-ae3e-beb86ed321f4 rd_LVM_LV=VolGroup-Swap/LogVol00 rd_NO_MD rd_LUKS_UUID=luks-90fb2a3a-7f63-4f34-b44d-099fff1ff57d rd_LVM_LV=VolGroup/LogVol00 rd_LUKS_UUID=luks-f99ac8f4-dd8a-48f6-853c-d2f5788262cd rd_LUKS_UUID=luks-c0ba554b-61df-4447-8c62-675ce051a50c SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM LANG=en_US.UTF-8 rhgb quiet crashkernel=auto drm.debug=255 debug loglevel=8 initcall_debug single
Freeing 9a-100 pfn range: 102 pages freed
1-1 mapping on 9a->100
Freeing cf224-cf268 pfn range: 68 pages freed
1-1 mapping on cf224->cf268
Freeing cf5b7-cf7ff pfn range: 584 pages freed
1-1 mapping on cf5b7->cf7ff
Freeing cf800-100000 pfn range: 198656 pages freed
1-1 mapping on cf800->100000
Released 199410 pages of unused memory
Set 199410 page(s) to 1-1 mapping
Populating 7daad0-80b5c2 pfn range: 199410 pages added
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009a000 (usable)
Xen: 000000000009a800 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 00000000cf224000 (usable)
Xen: 00000000cf224000 - 00000000cf268000 (reserved)
Xen: 00000000cf268000 - 00000000cf5b7000 (usable)
Xen: 00000000cf5b7000 - 00000000cf5e7000 (reserved)
Xen: 00000000cf5e7000 - 00000000cf7e7000 (ACPI NVS)
Xen: 00000000cf7e7000 - 00000000cf7ff000 (ACPI data)
Xen: 00000000cf7ff000 - 00000000cf800000 (usable)
Xen: 00000000fec00000 - 00000000fec01000 (reserved)
Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000ffc00000 - 00000000ffc20000 (reserved)
Xen: 0000000100000000 - 000000082e000000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. Precision M4600/08V9YG, BIOS A15 07/14/2013
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x82e000 max_arch_pfn = 0x400000000
last_pfn = 0xcf800 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f1c00] f1c00
initial memory mapped : 0 - 05b05000
Base memory trampoline at [ffff880000095000] 95000 size 20480
init_memory_mapping: 0000000000000000-00000000cf800000
0000000000 - 00cf800000 page 4k
kernel direct mapping tables up to 0xcf7fffff @ [mem 0x0249a000-0x02b1afff]
xen: setting RW the range 2ac7000 - 2b1b000
init_memory_mapping: 0000000100000000-000000082e000000
0100000000 - 082e000000 page 4k
kernel direct mapping tables up to 0x82dffffff @ [mem 0xcb896000-0xcf223fff]
xen: setting RW the range cf223000 - cf224000
RAMDISK: 02b1b000 - 05b05000
crashkernel: memory value expected
ACPI: RSDP 00000000000fe300 00024 (v02 DELL )
ACPI: XSDT 00000000cf7fde18 00084 (v01 DELL CBX3 06222004 MSFT 00010013)
ACPI: FACP 00000000cf787d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120320/tbfadt-378)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40, using 32 (20120320/tbfadt-502)
ACPI: DSDT 00000000cf754018 08A43 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
ACPI: FACS 00000000cf7e4e40 00040
ACPI: APIC 00000000cf7fcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013)
ACPI: TCPA 00000000cf7e5d18 00032 (v02 00000000 00000000)
ACPI: SSDT 00000000cf788a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
ACPI: MCFG 00000000cf7e5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
ACPI: HPET 00000000cf7e5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
ACPI: BOOT 00000000cf7e5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013)
ACPI: SSDT 00000000cf76b818 007C2 (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
ACPI: SSDT 00000000cf76a018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903)
ACPI: XMAR 00000000cf7e4a18 000B0 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: SLIC 00000000cf774c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013)
ACPI: SSDT 00000000cf76b018 00798 (v01 AmdRef AmdTabl 00001000 INTL 20090903)
ACPI: Local APIC address 0xfee00000
NUMA turned off
Faking a node at 0000000000000000-000000082e000000
Initmem setup node 0 0000000000000000-000000082e000000
NODE_DATA [mem 0x80b59c000-0x80b5c1fff]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0082e000
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000010 -> 0x0000009a
0: 0x00000100 -> 0x000cf224
0: 0x000cf268 -> 0x000cf5b7
0: 0x000cf7ff -> 0x000cf800
0: 0x00100000 -> 0x0082e000
On node 0 totalpages: 8377598
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3917 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 830892 pages, LIFO batch:31
Normal zone: 102928 pages used for memmap
Normal zone: 7425520 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 253, address 0xfec00000, GSI 0-253
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 270
PM: Registered nosave memory: 000000000009a000 - 000000000009b000
PM: Registered nosave memory: 000000000009b000 - 0000000000100000
PM: Registered nosave memory: 00000000cf224000 - 00000000cf268000
PM: Registered nosave memory: 00000000cf5b7000 - 00000000cf5e7000
PM: Registered nosave memory: 00000000cf5e7000 - 00000000cf7e7000
PM: Registered nosave memory: 00000000cf7e7000 - 00000000cf7ff000
PM: Registered nosave memory: 00000000cf800000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000
PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000
Allocating PCI resources starting at cf800000 (gap: cf800000:2f400000)
Booting paravirtualized kernel on Xen
Xen version: 4.2.3 (preserve-AD)
setup_percpu: NR_CPUS:4096 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88080b200000 s82432 r8192 d24064 u131072
pcpu-alloc: s82432 r8192 d24064 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8260329
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/luks-f99ac8f4-dd8a-48f6-853c-d2f5788262cd rd_LUKS_UUID=luks-3cac8466-a0bc-4f79-ae3e-beb86ed321f4 rd_LVM_LV=VolGroup-Swap/LogVol00 rd_NO_MD rd_LUKS_UUID=luks-90fb2a3a-7f63-4f34-b44d-099fff1ff57d rd_LVM_LV=VolGroup/LogVol00 rd_LUKS_UUID=luks-f99ac8f4-dd8a-48f6-853c-d2f5788262cd rd_LUKS_UUID=luks-c0ba554b-61df-4447-8c62-675ce051a50c SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM LANG=en_US.UTF-8 rhgb quiet crashkernel=auto drm.debug=255 debug loglevel=8 initcall_debug single
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Placing 64MB software IO TLB between ffff880806cb4000 - ffff88080acb4000
software IO TLB at phys 0x806cb4000 - 0x80acb4000
Memory: 32218680k/34308096k available (5651k kernel code, 797704k absent, 1291712k reserved, 5636k data, 1464k init)
Hierarchical RCU implementation.
NR_IRQS:262400 nr_irqs:2048 16
xen: sci override: global_irq=9 trigger=0 polarity=0
xen: registering gsi 9 triggering 0 polarity 0
xen: --> pirq=9 -> irq=9 (gsi=9)
xen: acpi sci 9
xen: --> pirq=1 -> irq=1 (gsi=1)
xen: --> pirq=2 -> irq=2 (gsi=2)
xen: --> pirq=3 -> irq=3 (gsi=3)
xen: --> pirq=4 -> irq=4 (gsi=4)
xen: --> pirq=5 -> irq=5 (gsi=5)
xen: --> pirq=6 -> irq=6 (gsi=6)
xen: --> pirq=7 -> irq=7 (gsi=7)
xen: --> pirq=8 -> irq=8 (gsi=8)
xen: --> pirq=10 -> irq=10 (gsi=10)
xen: --> pirq=11 -> irq=11 (gsi=11)
xen: --> pirq=12 -> irq=12 (gsi=12)
xen: --> pirq=13 -> irq=13 (gsi=13)
xen: --> pirq=14 -> irq=14 (gsi=14)
xen: --> pirq=15 -> irq=15 (gsi=15)
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
Detected 2294.840 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.68 BogoMIPS (lpj=2294840)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20120320
ftrace: allocating 22486 entries in 88 pages
calling trace_init_flags_sys_exit+0x0/0x12 @ 1
initcall trace_init_flags_sys_exit+0x0/0x12 returned 0 after 0 usecs
calling trace_init_flags_sys_enter+0x0/0x12 @ 1
initcall trace_init_flags_sys_enter+0x0/0x12 returned 0 after 0 usecs
calling init_hw_perf_events+0x0/0x44f @ 1
Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
initcall init_hw_perf_events+0x0/0x44f returned 0 after 0 usecs
calling register_trigger_all_cpu_backtrace+0x0/0x1f @ 1
initcall register_trigger_all_cpu_backtrace+0x0/0x1f returned 0 after 0 usecs
calling spawn_ksoftirqd+0x0/0x57 @ 1
initcall spawn_ksoftirqd+0x0/0x57 returned 0 after 0 usecs
calling init_workqueues+0x0/0x2f5 @ 1
initcall init_workqueues+0x0/0x2f5 returned 0 after 0 usecs
calling migration_init+0x0/0x71 @ 1
initcall migration_init+0x0/0x71 returned 0 after 0 usecs
calling cpu_stop_init+0x0/0xb6 @ 1
initcall cpu_stop_init+0x0/0xb6 returned 0 after 0 usecs
calling rcu_scheduler_really_started+0x0/0x12 @ 1
initcall rcu_scheduler_really_started+0x0/0x12 returned 0 after 0 usecs
calling relay_init+0x0/0x14 @ 1
initcall relay_init+0x0/0x14 returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x240 @ 1
initcall tracer_alloc_buffers+0x0/0x240 returned 0 after 0 usecs
calling init_trace_printk+0x0/0x12 @ 1
initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
NMI watchdog: disabled (cpu0): hardware events not enabled
installing Xen timer for CPU 1
NMI watchdog: disabled (cpu1): hardware events not enabled
installing Xen timer for CPU 2
NMI watchdog: disabled (cpu2): hardware events not enabled
installing Xen timer for CPU 3
NMI watchdog: disabled (cpu3): hardware events not enabled
installing Xen timer for CPU 4
NMI watchdog: disabled (cpu4): hardware events not enabled
installing Xen timer for CPU 5
NMI watchdog: disabled (cpu5): hardware events not enabled
installing Xen timer for CPU 6
NMI watchdog: disabled (cpu6): hardware events not enabled
installing Xen timer for CPU 7
NMI watchdog: disabled (cpu7): hardware events not enabled
Brought up 8 CPUs
devtmpfs: initialized
calling ipc_ns_init+0x0/0x14 @ 1
initcall ipc_ns_init+0x0/0x14 returned 0 after 0 usecs
calling init_mmap_min_addr+0x0/0x26 @ 1
initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs
calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
calling net_ns_init+0x0/0xea @ 1
initcall net_ns_init+0x0/0xea returned 0 after 0 usecs
calling e820_mark_nvs_memory+0x0/0x41 @ 1
PM: Registering ACPI NVS region [mem 0xcf5e7000-0xcf7e6fff] (2097152 bytes)
initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 0 usecs
calling cpufreq_tsc+0x0/0x37 @ 1
initcall cpufreq_tsc+0x0/0x37 returned 0 after 0 usecs
calling pci_reboot_init+0x0/0x1d @ 1
initcall pci_reboot_init+0x0/0x1d returned 0 after 0 usecs
calling init_lapic_sysfs+0x0/0x20 @ 1
initcall init_lapic_sysfs+0x0/0x20 returned 0 after 0 usecs
calling init_smp_flush+0x0/0x38 @ 1
initcall init_smp_flush+0x0/0x38 returned 0 after 0 usecs
calling cpu_hotplug_pm_sync_init+0x0/0x2f @ 1
initcall cpu_hotplug_pm_sync_init+0x0/0x2f returned 0 after 0 usecs
calling alloc_frozen_cpus+0x0/0x1e @ 1
initcall alloc_frozen_cpus+0x0/0x1e returned 0 after 0 usecs
calling ksysfs_init+0x0/0x94 @ 1
initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs
calling pm_init+0x0/0x66 @ 1
initcall pm_init+0x0/0x66 returned 0 after 0 usecs
calling pm_disk_init+0x0/0x19 @ 1
initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
calling swsusp_header_init+0x0/0x40 @ 1
initcall swsusp_header_init+0x0/0x40 returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0x12 @ 1
initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
calling init_ftrace_syscalls+0x0/0x77 @ 1
initcall init_ftrace_syscalls+0x0/0x77 returned 0 after 976 usecs
calling init_zero_pfn+0x0/0x35 @ 1
initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs
calling memory_failure_init+0x0/0xa8 @ 1
initcall memory_failure_init+0x0/0xa8 returned 0 after 0 usecs
calling fsnotify_init+0x0/0x26 @ 1
initcall fsnotify_init+0x0/0x26 returned 0 after 0 usecs
calling filelock_init+0x0/0x2a @ 1
initcall filelock_init+0x0/0x2a returned 0 after 0 usecs
calling init_misc_binfmt+0x0/0x31 @ 1
initcall init_misc_binfmt+0x0/0x31 returned 0 after 0 usecs
calling init_script_binfmt+0x0/0x16 @ 1
initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x16 @ 1
initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
calling init_compat_elf_binfmt+0x0/0x16 @ 1
initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
calling debugfs_init+0x0/0x5c @ 1
initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs
calling securityfs_init+0x0/0x53 @ 1
initcall securityfs_init+0x0/0x53 returned 0 after 0 usecs
calling random32_init+0x0/0xdb @ 1
initcall random32_init+0x0/0xdb returned 0 after 0 usecs
calling sfi_sysfs_init+0x0/0xdb @ 1
initcall sfi_sysfs_init+0x0/0xdb returned 0 after 0 usecs
calling __gnttab_init+0x0/0x22 @ 1
Grant tables using version 2 layout.
Grant table initialized
initcall __gnttab_init+0x0/0x22 returned 0 after 0 usecs
calling regulator_init+0x0/0x71 @ 1
dummy:
initcall regulator_init+0x0/0x71 returned 0 after 0 usecs
calling cpufreq_core_init+0x0/0xbe @ 1
initcall cpufreq_core_init+0x0/0xbe returned -19 after 0 usecs
calling cpuidle_init+0x0/0x40 @ 1
initcall cpuidle_init+0x0/0x40 returned -19 after 0 usecs
calling sock_init+0x0/0x83 @ 1
initcall sock_init+0x0/0x83 returned 0 after 0 usecs
calling net_inuse_init+0x0/0x26 @ 1
initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs
calling netpoll_init+0x0/0x31 @ 1
initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x1ad @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x1ad returned 0 after 976 usecs
calling bdi_class_init+0x0/0x4d @ 1
initcall bdi_class_init+0x0/0x4d returned 0 after 0 usecs
calling kobject_uevent_init+0x0/0x21 @ 1
initcall kobject_uevent_init+0x0/0x21 returned 0 after 0 usecs
calling pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
calling pci_driver_init+0x0/0x19 @ 1
initcall pci_driver_init+0x0/0x19 returned 0 after 0 usecs
calling backlight_class_init+0x0/0x5d @ 1
initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs
calling xenbus_init+0x0/0x1e0 @ 1
initcall xenbus_init+0x0/0x1e0 returned 0 after 0 usecs
calling tty_class_init+0x0/0x38 @ 1
initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs
calling vtconsole_class_init+0x0/0xc2 @ 1
initcall vtconsole_class_init+0x0/0xc2 returned 0 after 0 usecs
calling wakeup_sources_debugfs_init+0x0/0x2b @ 1
initcall wakeup_sources_debugfs_init+0x0/0x2b returned 0 after 0 usecs
calling register_node_type+0x0/0x34 @ 1
initcall register_node_type+0x0/0x34 returned 0 after 0 usecs
calling regmap_initcall+0x0/0xd @ 1
initcall regmap_initcall+0x0/0xd returned 0 after 0 usecs
calling spi_init+0x0/0x95 @ 1
initcall spi_init+0x0/0x95 returned 0 after 0 usecs
calling i2c_init+0x0/0x77 @ 1
initcall i2c_init+0x0/0x77 returned 0 after 0 usecs
calling amd_postcore_init+0x0/0x1b @ 1
initcall amd_postcore_init+0x0/0x1b returned 0 after 0 usecs
calling arch_kdebugfs_init+0x0/0x2e @ 1
initcall arch_kdebugfs_init+0x0/0x2e returned 0 after 0 usecs
calling configure_trampolines+0x0/0x26 @ 1
initcall configure_trampolines+0x0/0x26 returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x78 @ 1
initcall mtrr_if_init+0x0/0x78 returned -19 after 0 usecs
calling ffh_cstate_init+0x0/0x2a @ 1
initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs
calling activate_jump_labels+0x0/0x28 @ 1
initcall activate_jump_labels+0x0/0x28 returned 0 after 0 usecs
calling dynamic_debug_init+0x0/0x136 @ 1
initcall dynamic_debug_init+0x0/0x136 returned 0 after 0 usecs
calling acpi_pci_init+0x0/0x5c @ 1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x5c returned 0 after 0 usecs
calling dma_bus_init+0x0/0x19 @ 1
initcall dma_bus_init+0x0/0x19 returned 0 after 0 usecs
calling dma_channel_table_init+0x0/0x119 @ 1
initcall dma_channel_table_init+0x0/0x119 returned 0 after 0 usecs
calling setup_vcpu_hotplug_event+0x0/0x22 @ 1
initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs
calling register_xen_pci_notifier+0x0/0x33 @ 1
initcall register_xen_pci_notifier+0x0/0x33 returned 0 after 0 usecs
calling dmi_id_init+0x0/0xbe @ 1
initcall dmi_id_init+0x0/0xbe returned 0 after 0 usecs
calling pci_arch_init+0x0/0x69 @ 1
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
initcall pci_arch_init+0x0/0x69 returned 0 after 0 usecs
calling topology_init+0x0/0xa1 @ 1
initcall topology_init+0x0/0xa1 returned 0 after 976 usecs
calling mtrr_init_finialize+0x0/0x36 @ 1
initcall mtrr_init_finialize+0x0/0x36 returned 0 after 0 usecs
calling init_vdso+0x0/0x135 @ 1
initcall init_vdso+0x0/0x135 returned 0 after 0 usecs
calling sysenter_setup+0x0/0xbc @ 1
initcall sysenter_setup+0x0/0xbc returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x150 @ 1
initcall param_sysfs_init+0x0/0x150 returned 0 after 0 usecs
calling pm_sysrq_init+0x0/0x20 @ 1
initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs
calling default_bdi_init+0x0/0xaa @ 1
initcall default_bdi_init+0x0/0xaa returned 0 after 0 usecs
calling init_bio+0x0/0x10c @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0x10c returned 0 after 0 usecs
calling fsnotify_notification_init+0x0/0x8b @ 1
initcall fsnotify_notification_init+0x0/0x8b returned 0 after 0 usecs
calling cryptomgr_init+0x0/0x12 @ 1
initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
calling blk_settings_init+0x0/0x2c @ 1
initcall blk_settings_init+0x0/0x2c returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x70 @ 1
initcall blk_softirq_init+0x0/0x70 returned 0 after 0 usecs
calling blk_iopoll_setup+0x0/0x70 @ 1
initcall blk_iopoll_setup+0x0/0x70 returned 0 after 0 usecs
calling genhd_device_init+0x0/0x7b @ 1
initcall genhd_device_init+0x0/0x7b returned 0 after 0 usecs
calling blk_dev_integrity_init+0x0/0x2a @ 1
initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs
calling gpiolib_debugfs_init+0x0/0x24 @ 1
initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
calling pci_slot_init+0x0/0x50 @ 1
initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
calling fbmem_init+0x0/0x98 @ 1
initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs
calling acpi_init+0x0/0xbc @ 1
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000cf5d7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
ACPI: SSDT 00000000cf5d8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
ACPI: SSDT 00000000cf5d6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20120320/utresrc-650)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
initcall acpi_init+0x0/0xbc returned 0 after 289023 usecs
calling dock_init+0x0/0xa5 @ 1
ACPI: No dock devices found.
initcall dock_init+0x0/0xa5 returned 0 after 9764 usecs
calling acpi_pci_root_init+0x0/0x32 @ 1
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 0
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfeafffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
calling quirk_mmio_always_on+0x0/0xa @ 1 for 0000:00:00.0
pci fixup quirk_mmio_always_on+0x0/0xa returned after 0 usecs for 0000:00:00.0
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
calling pci_fixup_transparent_bridge+0x0/0x1d @ 1 for 0000:00:01.0
pci fixup pci_fixup_transparent_bridge+0x0/0x1d returned after 0 usecs for 0000:00:01.0
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xe39b0000-0xe39b000f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 10: [io 0x80a0-0x80a7]
pci 0000:00:16.3: reg 14: [mem 0xe3990000-0xe3990fff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xe3900000-0xe391ffff]
pci 0000:00:19.0: reg 14: [mem 0xe3980000-0xe3980fff]
pci 0000:00:19.0: reg 18: [io 0x8040-0x805f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xe3970000-0xe39703ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xe3960000-0xe3963fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
calling pci_fixup_transparent_bridge+0x0/0x1d @ 1 for 0000:00:1c.0
pci fixup pci_fixup_transparent_bridge+0x0/0x1d returned after 0 usecs for 0000:00:1c.0
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
calling pci_fixup_transparent_bridge+0x0/0x1d @ 1 for 0000:00:1c.1
pci fixup pci_fixup_transparent_bridge+0x0/0x1d returned after 0 usecs for 0000:00:1c.1
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
calling pci_fixup_transparent_bridge+0x0/0x1d @ 1 for 0000:00:1c.2
pci fixup pci_fixup_transparent_bridge+0x0/0x1d returned after 0 usecs for 0000:00:1c.2
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
calling pci_fixup_transparent_bridge+0x0/0x1d @ 1 for 0000:00:1c.3
pci fixup pci_fixup_transparent_bridge+0x0/0x1d returned after 0 usecs for 0000:00:1c.3
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
calling pci_fixup_transparent_bridge+0x0/0x1d @ 1 for 0000:00:1c.7
pci fixup pci_fixup_transparent_bridge+0x0/0x1d returned after 0 usecs for 0000:00:1c.7
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xe3950000-0xe39503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x8090-0x8097]
pci 0000:00:1f.2: reg 14: [io 0x8080-0x8083]
pci 0000:00:1f.2: reg 18: [io 0x8070-0x8077]
pci 0000:00:1f.2: reg 1c: [io 0x8060-0x8063]
pci 0000:00:1f.2: reg 20: [io 0x8020-0x803f]
pci 0000:00:1f.2: reg 24: [mem 0xe3940000-0xe39407ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xe3930000-0xe39300ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x8000-0x801f]
pci 0000:01:00.0: [1002:6740] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xe3820000-0xe383ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0x7000-0x70ff]
pci 0000:01:00.0: reg 30: [mem 0xe3800000-0xe381ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xe3840000-0xe3843fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xe3800000-0xe38fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: [8086:422b] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xe3700000-0xe3701fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xe3700000-0xe37fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04-09]
pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.2: bridge window [mem 0xe2c00000-0xe35fffff]
pci 0000:00:1c.2: bridge window [mem 0xe1100000-0xe1afffff 64bit pref]
pci 0000:0a:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:0a:00.0: reg 10: [mem 0xe3600000-0xe3601fff 64bit]
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.3: bridge window [mem 0xe3600000-0xe36fffff]
pci 0000:0b:00.0: [1217:13f7] type 00 class 0x0c0010
pci 0000:0b:00.0: reg 10: [mem 0xe1b30000-0xe1b30fff]
pci 0000:0b:00.0: supports D1 D2
pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:00.1: [1217:8321] type 00 class 0x080501
pci 0000:0b:00.1: reg 10: [mem 0xe1b20000-0xe1b201ff]
pci 0000:0b:00.1: supports D1 D2
pci 0000:0b:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:00.2: [1217:8331] type 00 class 0x018000
pci 0000:0b:00.2: reg 10: [mem 0xe1b10000-0xe1b103ff]
pci 0000:0b:00.2: reg 18: [mem 0xe1b00000-0xe1b003ff]
pci 0000:0b:00.2: supports D1 D2
pci 0000:0b:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 0b-12]
pci 0000:00:1c.7: bridge window [io 0x2000-0x5fff]
pci 0000:00:1c.7: bridge window [mem 0xe1b00000-0xe2bfffff]
pci 0000:00:1c.7: bridge window [mem 0xe0000000-0xe10fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 1f 0
pci0000:00: Requesting ACPI _OSC control (0x1d)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
initcall acpi_pci_root_init+0x0/0x32 returned 0 after 31245 usecs
calling acpi_pci_link_init+0x0/0x43 @ 1
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
initcall acpi_pci_link_init+0x0/0x43 returned 0 after 4882 usecs
calling pnp_init+0x0/0x19 @ 1
initcall pnp_init+0x0/0x19 returned 0 after 0 usecs
calling xen_setup_shutdown_event+0x0/0x30 @ 1
initcall xen_setup_shutdown_event+0x0/0x30 returned 0 after 0 usecs
calling balloon_init+0x0/0x133 @ 1
xen/balloon: Initialising balloon driver.
initcall balloon_init+0x0/0x133 returned 0 after 976 usecs
calling xenbus_probe_backend_init+0x0/0x5e @ 1
initcall xenbus_probe_backend_init+0x0/0x5e returned 0 after 0 usecs
calling xenbus_probe_frontend_init+0x0/0x5e @ 1
initcall xenbus_probe_frontend_init+0x0/0x5e returned 0 after 0 usecs
calling balloon_init+0x0/0x35 @ 1
xen-balloon: Initialising balloon driver.
initcall balloon_init+0x0/0x35 returned 0 after 0 usecs
calling ab8500_regulator_init+0x0/0x31 @ 1
initcall ab8500_regulator_init+0x0/0x31 returned 0 after 0 usecs
calling misc_init+0x0/0xba @ 1
initcall misc_init+0x0/0xba returned 0 after 0 usecs
calling vga_arb_device_init+0x0/0xde @ 1
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
initcall vga_arb_device_init+0x0/0xde returned 0 after 0 usecs
calling cn_init+0x0/0x9e @ 1
initcall cn_init+0x0/0x9e returned 0 after 0 usecs
calling stmpe_init+0x0/0x14 @ 1
initcall stmpe_init+0x0/0x14 returned 0 after 0 usecs
calling stmpe_init+0x0/0x12 @ 1
initcall stmpe_init+0x0/0x12 returned 0 after 0 usecs
calling wm831x_spi_init+0x0/0x28 @ 1
initcall wm831x_spi_init+0x0/0x28 returned 0 after 0 usecs
calling tps65912_spi_init+0x0/0x28 @ 1
initcall tps65912_spi_init+0x0/0x28 returned 0 after 0 usecs
calling ezx_pcap_init+0x0/0x12 @ 1
initcall ezx_pcap_init+0x0/0x12 returned 0 after 0 usecs
calling da9052_spi_init+0x0/0x31 @ 1
initcall da9052_spi_init+0x0/0x31 returned 0 after 0 usecs
calling ab8500_sysctrl_init+0x0/0x12 @ 1
initcall ab8500_sysctrl_init+0x0/0x12 returned 0 after 0 usecs
calling init_scsi+0x0/0x91 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x91 returned 0 after 0 usecs
calling ata_init+0x0/0x5d @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x5d returned 0 after 976 usecs
calling phy_init+0x0/0x2e @ 1
initcall phy_init+0x0/0x2e returned 0 after 0 usecs
calling init_pcmcia_cs+0x0/0x3d @ 1
initcall init_pcmcia_cs+0x0/0x3d returned 0 after 0 usecs
calling usb_init+0x0/0x17a @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x17a returned 0 after 976 usecs
calling serio_init+0x0/0x38 @ 1
initcall serio_init+0x0/0x38 returned 0 after 0 usecs
calling input_init+0x0/0x10c @ 1
initcall input_init+0x0/0x10c returned 0 after 0 usecs
calling rtc_init+0x0/0x71 @ 1
initcall rtc_init+0x0/0x71 returned 0 after 0 usecs
calling power_supply_class_init+0x0/0x44 @ 1
initcall power_supply_class_init+0x0/0x44 returned 0 after 0 usecs
calling md_init+0x0/0x16a @ 1
initcall md_init+0x0/0x16a returned 0 after 0 usecs
calling leds_init+0x0/0x48 @ 1
initcall leds_init+0x0/0x48 returned 0 after 0 usecs
calling devfreq_init+0x0/0x51 @ 1
initcall devfreq_init+0x0/0x51 returned 0 after 0 usecs
calling pci_subsys_init+0x0/0x4f @ 1
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009a000 - 000000000009ffff
reserve RAM buffer: 00000000cf224000 - 00000000cfffffff
reserve RAM buffer: 00000000cf5b7000 - 00000000cfffffff
reserve RAM buffer: 00000000cf800000 - 00000000cfffffff
reserve RAM buffer: 000000082e000000 - 000000082fffffff
initcall pci_subsys_init+0x0/0x4f returned 0 after 5858 usecs
calling proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after 0 usecs
calling net_dev_init+0x0/0x1b3 @ 1
initcall net_dev_init+0x0/0x1b3 returned 0 after 976 usecs
calling neigh_init+0x0/0x80 @ 1
initcall neigh_init+0x0/0x80 returned 0 after 0 usecs
calling fib_rules_init+0x0/0xaf @ 1
initcall fib_rules_init+0x0/0xaf returned 0 after 0 usecs
calling pktsched_init+0x0/0xfe @ 1
initcall pktsched_init+0x0/0xfe returned 0 after 0 usecs
calling tc_filter_init+0x0/0x55 @ 1
initcall tc_filter_init+0x0/0x55 returned 0 after 0 usecs
calling tc_action_init+0x0/0x55 @ 1
initcall tc_action_init+0x0/0x55 returned 0 after 0 usecs
calling genl_init+0x0/0x84 @ 1
initcall genl_init+0x0/0x84 returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x61 @ 1
initcall cipso_v4_init+0x0/0x61 returned 0 after 0 usecs
calling wireless_nlevent_init+0x0/0x12 @ 1
initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs
calling netlbl_init+0x0/0x81 @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x81 returned 0 after 976 usecs
calling net_sysctl_init+0x0/0x49 @ 1
initcall net_sysctl_init+0x0/0x49 returned 0 after 0 usecs
calling nfc_init+0x0/0x9e @ 1
nfc: nfc_init: NFC Core ver 0.1
NET: Registered protocol family 39
initcall nfc_init+0x0/0x9e returned 0 after 0 usecs
calling ab8500_gpadc_init+0x0/0x12 @ 1
initcall ab8500_gpadc_init+0x0/0x12 returned 0 after 0 usecs
calling ab8500_charger_init+0x0/0x12 @ 1
initcall ab8500_charger_init+0x0/0x12 returned 0 after 0 usecs
calling ab8500_fg_init+0x0/0x12 @ 1
initcall ab8500_fg_init+0x0/0x12 returned 0 after 0 usecs
calling xen_p2m_debugfs+0x0/0x4a @ 1
initcall xen_p2m_debugfs+0x0/0x4a returned 0 after 0 usecs
calling hpet_late_init+0x0/0x103 @ 1
initcall hpet_late_init+0x0/0x103 returned -19 after 0 usecs
calling init_amd_nbs+0x0/0x3f @ 1
initcall init_amd_nbs+0x0/0x3f returned 0 after 0 usecs
calling clocksource_done_booting+0x0/0x5a @ 1
Switching to clocksource xen
initcall clocksource_done_booting+0x0/0x5a returned 0 after 979 usecs
calling ftrace_init_debugfs+0x0/0xd6 @ 1
initcall ftrace_init_debugfs+0x0/0xd6 returned 0 after 28 usecs
calling tracer_init_debugfs+0x0/0x330 @ 1
initcall tracer_init_debugfs+0x0/0x330 returned 0 after 105 usecs
calling init_trace_printk_function_export+0x0/0x2f @ 1
initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 2 usecs
calling event_trace_init+0x0/0x1bb @ 1
initcall event_trace_init+0x0/0x1bb returned 0 after 6130 usecs
calling init_kprobe_trace+0x0/0x93 @ 1
initcall init_kprobe_trace+0x0/0x93 returned 0 after 4 usecs
calling init_pipe_fs+0x0/0x4c @ 1
initcall init_pipe_fs+0x0/0x4c returned 0 after 10 usecs
calling eventpoll_init+0x0/0xda @ 1
initcall eventpoll_init+0x0/0xda returned 0 after 41 usecs
calling anon_inode_init+0x0/0x5b @ 1
initcall anon_inode_init+0x0/0x5b returned 0 after 7 usecs
calling tomoyo_initerface_init+0x0/0x17d @ 1
initcall tomoyo_initerface_init+0x0/0x17d returned 0 after 0 usecs
calling blk_scsi_ioctl_init+0x0/0x289 @ 1
initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs
calling acpi_event_init+0x0/0x81 @ 1
initcall acpi_event_init+0x0/0x81 returned 0 after 6 usecs
calling pnp_system_init+0x0/0x12 @ 1
initcall pnp_system_init+0x0/0x12 returned 0 after 8 usecs
calling pnpacpi_init+0x0/0x8c @ 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xd0000000-0xfeafffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:04: [io 0x00f0]
xen: registering gsi 13 triggering 1 polarity 0
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x1000-0x100f]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x164e-0x164f]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
xen: registering gsi 8 triggering 1 polarity 0
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0060]
pnp 00:07: [io 0x0064]
xen: registering gsi 1 triggering 1 polarity 0
pnp 00:07: [irq 1]
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled)
xen: registering gsi 12 triggering 1 polarity 0
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs DLL04a3 PNP0f13 (active)
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfed10000-0xfed17fff]
pnp 00:0a: [mem 0xfed18000-0xfed18fff]
pnp 00:0a: [mem 0xfed19000-0xfed19fff]
pnp 00:0a: [mem 0xf8000000-0xfbffffff]
pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
pnp 00:0a: [mem 0xfed90000-0xfed93fff]
pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
pnp 00:0a: [mem 0xff000000-0xffffffff]
pnp 00:0a: [mem 0xfee00000-0xfeefffff]
pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: registering gsi 23 triggering 1 polarity 0
xen: --> pirq=23 -> irq=23 (gsi=23)
pnp 00:0b: [irq 23]
pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20120320/utresrc-650)
pnp 00:0c: can't evaluate _CRS: 12311
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x8c returned 0 after 91315 usecs
calling chr_dev_init+0x0/0xc6 @ 1
initcall chr_dev_init+0x0/0xc6 returned 0 after 2852 usecs
calling firmware_class_init+0x0/0x19 @ 1
initcall firmware_class_init+0x0/0x19 returned 0 after 4 usecs
calling init_pcmcia_bus+0x0/0x6c @ 1
initcall init_pcmcia_bus+0x0/0x6c returned 0 after 7 usecs
calling thermal_init+0x0/0x79 @ 1
initcall thermal_init+0x0/0x79 returned 0 after 7 usecs
calling cpufreq_gov_performance_init+0x0/0x12 @ 1
initcall cpufreq_gov_performance_init+0x0/0x12 returned -19 after 0 usecs
calling cpufreq_gov_userspace_init+0x0/0x12 @ 1
initcall cpufreq_gov_userspace_init+0x0/0x12 returned -19 after 0 usecs
calling init_acpi_pm_clocksource+0x0/0xec @ 1
PM-Timer failed consistency check (0x0xffffff) - aborting.
initcall init_acpi_pm_clocksource+0x0/0xec returned -19 after 4649 usecs
calling pcibios_assign_resources+0x0/0xf8 @ 1
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xe3800000-0xe38fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xe3700000-0xe37fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04-09]
pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.2: bridge window [mem 0xe2c00000-0xe35fffff]
pci 0000:00:1c.2: bridge window [mem 0xe1100000-0xe1afffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.3: bridge window [mem 0xe3600000-0xe36fffff]
pci 0000:00:1c.7: PCI bridge to [bus 0b-12]
pci 0000:00:1c.7: bridge window [io 0x2000-0x5fff]
pci 0000:00:1c.7: bridge window [mem 0xe1b00000-0xe2bfffff]
pci 0000:00:1c.7: bridge window [mem 0xe0000000-0xe10fffff 64bit pref]
xen: registering gsi 16 triggering 0 polarity 1
xen: --> pirq=16 -> irq=16 (gsi=16)
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
xen: registering gsi 17 triggering 0 polarity 1
xen: --> pirq=17 -> irq=17 (gsi=17)
xen: registering gsi 18 triggering 0 polarity 1
xen: --> pirq=18 -> irq=18 (gsi=18)
xen: registering gsi 19 triggering 0 polarity 1
xen: --> pirq=19 -> irq=19 (gsi=19)
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xe3800000-0xe38fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xe3700000-0xe37fffff]
pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:04: resource 1 [mem 0xe2c00000-0xe35fffff]
pci_bus 0000:04: resource 2 [mem 0xe1100000-0xe1afffff 64bit pref]
pci_bus 0000:0a: resource 1 [mem 0xe3600000-0xe36fffff]
pci_bus 0000:0b: resource 0 [io 0x2000-0x5fff]
pci_bus 0000:0b: resource 1 [mem 0xe1b00000-0xe2bfffff]
pci_bus 0000:0b: resource 2 [mem 0xe0000000-0xe10fffff 64bit pref]
initcall pcibios_assign_resources+0x0/0xf8 returned 0 after 7941 usecs
calling sysctl_core_init+0x0/0x38 @ 1
initcall sysctl_core_init+0x0/0x38 returned 0 after 20 usecs
calling inet_init+0x0/0x25c @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
initcall inet_init+0x0/0x25c returned 0 after 4995 usecs
calling af_unix_init+0x0/0x55 @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x55 returned 0 after 138 usecs
calling pci_apply_final_quirks+0x0/0x10c @ 1
calling quirk_e100_interrupt+0x0/0x15e @ 1 for 0000:00:19.0
pci fixup quirk_e100_interrupt+0x0/0x15e returned after 0 usecs for 0000:00:19.0
calling quirk_usb_early_handoff+0x0/0x103 @ 1 for 0000:00:1a.0
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
pci fixup quirk_usb_early_handoff+0x0/0x103 returned after 294 usecs for 0000:00:1a.0
calling quirk_usb_early_handoff+0x0/0x103 @ 1 for 0000:00:1d.0
xen: registering gsi 17 triggering 0 polarity 1
Already setup the GSI :17
pci fixup quirk_usb_early_handoff+0x0/0x103 returned after 287 usecs for 0000:00:1d.0
calling pci_fixup_video+0x0/0xa0 @ 1 for 0000:01:00.0
pci 0000:01:00.0: Boot video device
pci fixup pci_fixup_video+0x0/0xa0 returned after 117 usecs for 0000:01:00.0
calling quirk_usb_early_handoff+0x0/0x103 @ 1 for 0000:0a:00.0
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
pci fixup quirk_usb_early_handoff+0x0/0x103 returned after 297 usecs for 0000:0a:00.0
PCI: CLS 64 bytes, default 64
initcall pci_apply_final_quirks+0x0/0x10c returned 0 after 2589 usecs
calling populate_rootfs+0x0/0xd3 @ 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 49064k freed
initcall populate_rootfs+0x0/0xd3 returned 0 after 50763 usecs
calling pci_iommu_init+0x0/0x41 @ 1
initcall pci_iommu_init+0x0/0x41 returned 0 after 0 usecs
calling calgary_fixup_tce_spaces+0x0/0x105 @ 1
initcall calgary_fixup_tce_spaces+0x0/0x105 returned -19 after 0 usecs
calling ir_dev_scope_init+0x0/0x16 @ 1
initcall ir_dev_scope_init+0x0/0x16 returned 0 after 0 usecs
calling i8259A_init_ops+0x0/0x21 @ 1
initcall i8259A_init_ops+0x0/0x21 returned 0 after 17 usecs
calling vsyscall_init+0x0/0x27 @ 1
initcall vsyscall_init+0x0/0x27 returned 0 after 20 usecs
calling sbf_init+0x0/0xf6 @ 1
Simple Boot Flag at 0xf3 set to 0x1
initcall sbf_init+0x0/0xf6 returned 0 after 120 usecs
calling init_tsc_clocksource+0x0/0x89 @ 1
initcall init_tsc_clocksource+0x0/0x89 returned 0 after 4 usecs
calling add_rtc_cmos+0x0/0x96 @ 1
initcall add_rtc_cmos+0x0/0x96 returned 0 after 4 usecs
calling i8237A_init_ops+0x0/0x14 @ 1
initcall i8237A_init_ops+0x0/0x14 returned 0 after 0 usecs
calling cache_sysfs_init+0x0/0x6e @ 1
initcall cache_sysfs_init+0x0/0x6e returned 0 after 252 usecs
calling mcheck_init_device+0x0/0x120 @ 1
initcall mcheck_init_device+0x0/0x120 returned -5 after 0 usecs
initcall mcheck_init_device+0x0/0x120 returned with error code -5
calling threshold_init_device+0x0/0x91 @ 1
initcall threshold_init_device+0x0/0x91 returned 0 after 0 usecs
calling thermal_throttle_init_device+0x0/0xa3 @ 1
initcall thermal_throttle_init_device+0x0/0xa3 returned 0 after 0 usecs
calling amd_ibs_init+0x0/0x1ab @ 1
initcall amd_ibs_init+0x0/0x1ab returned -19 after 0 usecs
calling msr_init+0x0/0x150 @ 1
initcall msr_init+0x0/0x150 returned 0 after 336 usecs
calling cpuid_init+0x0/0x150 @ 1
initcall cpuid_init+0x0/0x150 returned 0 after 233 usecs
calling ioapic_init_ops+0x0/0x14 @ 1
initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs
calling add_pcspkr+0x0/0x60 @ 1
initcall add_pcspkr+0x0/0x60 returned 0 after 14 usecs
calling audit_classes_init+0x0/0xaf @ 1
initcall audit_classes_init+0x0/0xaf returned 0 after 3 usecs
calling ia32_binfmt_init+0x0/0x14 @ 1
initcall ia32_binfmt_init+0x0/0x14 returned 0 after 4 usecs
calling proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after 3 usecs
calling ioresources_init+0x0/0x3c @ 1
initcall ioresources_init+0x0/0x3c returned 0 after 1 usecs
calling uid_cache_init+0x0/0x8f @ 1
initcall uid_cache_init+0x0/0x8f returned 0 after 24 usecs
calling init_posix_timers+0x0/0x1f4 @ 1
initcall init_posix_timers+0x0/0x1f4 returned 0 after 16 usecs
calling init_posix_cpu_timers+0x0/0xbf @ 1
initcall init_posix_cpu_timers+0x0/0xbf returned 0 after 0 usecs
calling proc_schedstat_init+0x0/0x22 @ 1
initcall proc_schedstat_init+0x0/0x22 returned 0 after 1 usecs
calling init_sched_debug_procfs+0x0/0x2c @ 1
initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 1 usecs
calling snapshot_device_init+0x0/0x12 @ 1
initcall snapshot_device_init+0x0/0x12 returned 0 after 35 usecs
calling create_proc_profile+0x0/0x80 @ 1
initcall create_proc_profile+0x0/0x80 returned 0 after 0 usecs
calling timekeeping_init_ops+0x0/0x14 @ 1
initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs
calling init_clocksource_sysfs+0x0/0x52 @ 1
initcall init_clocksource_sysfs+0x0/0x52 returned 0 after 23 usecs
calling init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 1 usecs
calling alarmtimer_init+0x0/0x182 @ 1
initcall alarmtimer_init+0x0/0x182 returned 0 after 22 usecs
calling init_tstats_procfs+0x0/0x2c @ 1
initcall init_tstats_procfs+0x0/0x2c returned 0 after 1 usecs
calling futex_init+0x0/0x65 @ 1
initcall futex_init+0x0/0x65 returned 0 after 4 usecs
calling proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 1 usecs
calling proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after 0 usecs
calling kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after 1 usecs
calling crash_save_vmcoreinfo_init+0x0/0x4a9 @ 1
initcall crash_save_vmcoreinfo_init+0x0/0x4a9 returned 0 after 18 usecs
calling crash_notes_memory_init+0x0/0x36 @ 1
initcall crash_notes_memory_init+0x0/0x36 returned 0 after 3 usecs
calling user_namespaces_init+0x0/0x2d @ 1
initcall user_namespaces_init+0x0/0x2d returned 0 after 16 usecs
calling pid_namespaces_init+0x0/0x40 @ 1
initcall pid_namespaces_init+0x0/0x40 returned 0 after 18 usecs
calling audit_init+0x0/0x133 @ 1
audit: initializing netlink socket (disabled)
type=2000 audit(1381693624.485:1): initialized
initcall audit_init+0x0/0x133 returned 0 after 241 usecs
calling audit_watch_init+0x0/0x3a @ 1
initcall audit_watch_init+0x0/0x3a returned 0 after 0 usecs
calling audit_tree_init+0x0/0x49 @ 1
initcall audit_tree_init+0x0/0x49 returned 0 after 0 usecs
calling init_kprobes+0x0/0x19f @ 1
initcall init_kprobes+0x0/0x19f returned 0 after 18856 usecs
calling hung_task_init+0x0/0x56 @ 1
initcall hung_task_init+0x0/0x56 returned 0 after 41 usecs
calling irq_pm_init_ops+0x0/0x14 @ 1
initcall irq_pm_init_ops+0x0/0x14 returned 0 after 0 usecs
calling utsname_sysctl_init+0x0/0x14 @ 1
initcall utsname_sysctl_init+0x0/0x14 returned 0 after 6 usecs
calling init_tracepoints+0x0/0x20 @ 1
initcall init_tracepoints+0x0/0x20 returned 0 after 0 usecs
calling ftrace_mod_cmd_init+0x0/0x12 @ 1
initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 0 usecs
calling init_events+0x0/0x61 @ 1
initcall init_events+0x0/0x61 returned 0 after 3 usecs
calling init_function_trace+0x0/0x3e @ 1
initcall init_function_trace+0x0/0x3e returned 0 after 1 usecs
calling init_wakeup_tracer+0x0/0x22 @ 1
initcall init_wakeup_tracer+0x0/0x22 returned 0 after 0 usecs
calling stack_trace_init+0x0/0xb2 @ 1
initcall stack_trace_init+0x0/0xb2 returned 0 after 8 usecs
calling init_graph_trace+0x0/0x66 @ 1
initcall init_graph_trace+0x0/0x66 returned 0 after 1 usecs
calling init_blk_tracer+0x0/0x5a @ 1
initcall init_blk_tracer+0x0/0x5a returned 0 after 0 usecs
calling perf_event_sysfs_init+0x0/0x9a @ 1
initcall perf_event_sysfs_init+0x0/0x9a returned 0 after 38 usecs
calling init_per_zone_wmark_min+0x0/0x8c @ 1
initcall init_per_zone_wmark_min+0x0/0x8c returned 0 after 1303 usecs
calling kswapd_init+0x0/0x7d @ 1
initcall kswapd_init+0x0/0x7d returned 0 after 47 usecs
calling extfrag_debug_init+0x0/0x72 @ 1
initcall extfrag_debug_init+0x0/0x72 returned 0 after 8 usecs
calling setup_vmstat+0x0/0xca @ 1
initcall setup_vmstat+0x0/0xca returned 0 after 19 usecs
calling mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after 2 usecs
calling proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 1 usecs
calling procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after 1 usecs
calling hugetlb_init+0x0/0x350 @ 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x350 returned 0 after 129 usecs
calling mmu_notifier_init+0x0/0x12 @ 1
initcall mmu_notifier_init+0x0/0x12 returned 0 after 1 usecs
calling ksm_init+0x0/0x15c @ 1
initcall ksm_init+0x0/0x15c returned 0 after 91 usecs
calling slab_proc_init+0x0/0x25 @ 1
initcall slab_proc_init+0x0/0x25 returned 0 after 1 usecs
calling cpucache_init+0x0/0x4a @ 1
initcall cpucache_init+0x0/0x4a returned 0 after 1 usecs
calling hugepage_init+0x0/0xfc @ 1
initcall hugepage_init+0x0/0xfc returned -22 after 0 usecs
initcall hugepage_init+0x0/0xfc returned with error code -22
calling init_cleancache+0x0/0x96 @ 1
initcall init_cleancache+0x0/0x96 returned 0 after 7 usecs
calling fcntl_init+0x0/0x2a @ 1
initcall fcntl_init+0x0/0x2a returned 0 after 16 usecs
calling proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 1 usecs
calling dio_init+0x0/0x2d @ 1
initcall dio_init+0x0/0x2d returned 0 after 19 usecs
calling fsnotify_mark_init+0x0/0x40 @ 1
initcall fsnotify_mark_init+0x0/0x40 returned 0 after 33 usecs
calling dnotify_init+0x0/0x7b @ 1
initcall dnotify_init+0x0/0x7b returned 0 after 32 usecs
calling inotify_user_setup+0x0/0x70 @ 1
initcall inotify_user_setup+0x0/0x70 returned 0 after 29 usecs
calling aio_setup+0x0/0x9f @ 1
initcall aio_setup+0x0/0x9f returned 0 after 33 usecs
calling proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 1 usecs
calling init_sys32_ioctl+0x0/0x28 @ 1
initcall init_sys32_ioctl+0x0/0x28 returned 0 after 83 usecs
calling dquot_init+0x0/0x121 @ 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
initcall dquot_init+0x0/0x121 returned 0 after 268 usecs
calling init_v2_quota_format+0x0/0x22 @ 1
initcall init_v2_quota_format+0x0/0x22 returned 0 after 0 usecs
calling quota_init+0x0/0x26 @ 1
initcall quota_init+0x0/0x26 returned 0 after 5 usecs
calling proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 2 usecs
calling proc_consoles_init+0x0/0x22 @ 1
initcall proc_consoles_init+0x0/0x22 returned 0 after 1 usecs
calling proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 0 usecs
calling proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 0 usecs
calling proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 0 usecs
calling proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 2 usecs
calling proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs
calling proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 1 usecs
calling proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after 0 usecs
calling proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 0 usecs
calling proc_softirqs_init+0x0/0x22 @ 1
initcall proc_softirqs_init+0x0/0x22 returned 0 after 1 usecs
calling proc_kcore_init+0x0/0xb5 @ 1
initcall proc_kcore_init+0x0/0xb5 returned 0 after 6 usecs
calling vmcore_init+0x0/0x75 @ 1
initcall vmcore_init+0x0/0x75 returned 0 after 0 usecs
calling proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 0 usecs
calling proc_page_init+0x0/0x42 @ 1
initcall proc_page_init+0x0/0x42 returned 0 after 2 usecs
calling init_devpts_fs+0x0/0x62 @ 1
initcall init_devpts_fs+0x0/0x62 returned 0 after 21 usecs
calling init_ramfs_fs+0x0/0x12 @ 1
initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 usecs
calling init_hugetlbfs_fs+0x0/0x99 @ 1
initcall init_hugetlbfs_fs+0x0/0x99 returned 0 after 31 usecs
calling init_iso9660_fs+0x0/0x77 @ 1
initcall init_iso9660_fs+0x0/0x77 returned 0 after 35 usecs
calling init_nls_cp437+0x0/0x12 @ 1
initcall init_nls_cp437+0x0/0x12 returned 0 after 0 usecs
calling init_nls_ascii+0x0/0x12 @ 1
initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs
calling init_pstore_fs+0x0/0x12 @ 1
initcall init_pstore_fs+0x0/0x12 returned 0 after 0 usecs
calling ipc_init+0x0/0x2f @ 1
msgmni has been set to 32768
initcall ipc_init+0x0/0x2f returned 0 after 117 usecs
calling ipc_sysctl_init+0x0/0x14 @ 1
initcall ipc_sysctl_init+0x0/0x14 returned 0 after 8 usecs
calling init_mqueue_fs+0x0/0xa2 @ 1
initcall init_mqueue_fs+0x0/0xa2 returned 0 after 30 usecs
calling key_proc_init+0x0/0x5e @ 1
initcall key_proc_init+0x0/0x5e returned 0 after 3 usecs
calling selinux_nf_ip_init+0x0/0x69 @ 1
SELinux: Registering netfilter hooks
initcall selinux_nf_ip_init+0x0/0x69 returned 0 after 111 usecs
calling init_sel_fs+0x0/0x9e @ 1
initcall init_sel_fs+0x0/0x9e returned 0 after 54 usecs
calling selnl_init+0x0/0x4d @ 1
initcall selnl_init+0x0/0x4d returned 0 after 3 usecs
calling sel_netif_init+0x0/0x66 @ 1
initcall sel_netif_init+0x0/0x66 returned 0 after 3 usecs
calling sel_netnode_init+0x0/0x75 @ 1
initcall sel_netnode_init+0x0/0x75 returned 0 after 0 usecs
calling sel_netport_init+0x0/0x75 @ 1
initcall sel_netport_init+0x0/0x75 returned 0 after 0 usecs
calling aurule_init+0x0/0x37 @ 1
initcall aurule_init+0x0/0x37 returned 0 after 0 usecs
calling crypto_wq_init+0x0/0x33 @ 1
initcall crypto_wq_init+0x0/0x33 returned 0 after 38 usecs
calling crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after 4 usecs
calling skcipher_module_init+0x0/0x36 @ 1
initcall skcipher_module_init+0x0/0x36 returned 0 after 0 usecs
calling chainiv_module_init+0x0/0x12 @ 1
initcall chainiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling eseqiv_module_init+0x0/0x12 @ 1
initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
calling md5_mod_init+0x0/0x12 @ 1
initcall md5_mod_init+0x0/0x12 returned 0 after 70 usecs
calling sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 66 usecs
calling crc32c_mod_init+0x0/0x12 @ 1
initcall crc32c_mod_init+0x0/0x12 returned 0 after 69 usecs
calling lzo_mod_init+0x0/0x12 @ 1
initcall lzo_mod_init+0x0/0x12 returned 0 after 115 usecs
calling krng_mod_init+0x0/0x12 @ 1
alg: No test for stdrng (krng)
initcall krng_mod_init+0x0/0x12 returned 0 after 175 usecs
calling proc_genhd_init+0x0/0x3c @ 1
initcall proc_genhd_init+0x0/0x3c returned 0 after 3 usecs
calling bsg_init+0x0/0x12e @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
initcall bsg_init+0x0/0x12e returned 0 after 140 usecs
calling init_cgroup_blkio+0x0/0x12 @ 1
initcall init_cgroup_blkio+0x0/0x12 returned 0 after 0 usecs
calling throtl_init+0x0/0x46 @ 1
initcall throtl_init+0x0/0x46 returned 0 after 36 usecs
calling noop_init+0x0/0x12 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x12 returned 0 after 111 usecs
calling deadline_init+0x0/0x12 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x12 returned 0 after 110 usecs
calling cfq_init+0x0/0xa0 @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0xa0 returned 0 after 143 usecs
calling percpu_counter_startup+0x0/0x33 @ 1
initcall percpu_counter_startup+0x0/0x33 returned 0 after 0 usecs
calling dynamic_debug_init_debugfs+0x0/0x6b @ 1
initcall dynamic_debug_init_debugfs+0x0/0x6b returned 0 after 6 usecs
calling digsig_init+0x0/0x3d @ 1
initcall digsig_init+0x0/0x3d returned 0 after 1 usecs
calling pci_proc_init+0x0/0x6a @ 1
initcall pci_proc_init+0x0/0x6a returned 0 after 43 usecs
calling pcie_portdrv_init+0x0/0x7a @ 1
initcall pcie_portdrv_init+0x0/0x7a returned 0 after 677 usecs
calling aer_service_init+0x0/0x2b @ 1
initcall aer_service_init+0x0/0x2b returned 0 after 6 usecs
calling pcie_pme_service_init+0x0/0x12 @ 1
initcall pcie_pme_service_init+0x0/0x12 returned 0 after 4 usecs
calling ioapic_init+0x0/0x1b @ 1
initcall ioapic_init+0x0/0x1b returned 0 after 9 usecs
calling pci_hotplug_init+0x0/0x1d @ 1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x1d returned 0 after 112 usecs
calling pcied_init+0x0/0x79 @ 1
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
initcall pcied_init+0x0/0x79 returned 0 after 128 usecs
calling pci_stub_init+0x0/0x150 @ 1
initcall pci_stub_init+0x0/0x150 returned 0 after 7 usecs
calling pcifront_init+0x0/0x3a @ 1
initcall pcifront_init+0x0/0x3a returned -19 after 0 usecs
calling fb_console_init+0x0/0x1a2 @ 1
initcall fb_console_init+0x0/0x1a2 returned 0 after 15 usecs
calling imsttfb_init+0x0/0x4b @ 1
initcall imsttfb_init+0x0/0x4b returned 0 after 9 usecs
calling asiliantfb_init+0x0/0x34 @ 1
initcall asiliantfb_init+0x0/0x34 returned 0 after 7 usecs
calling xenfb_init+0x0/0x2f @ 1
initcall xenfb_init+0x0/0x2f returned -19 after 0 usecs
calling vesafb_init+0x0/0x9c @ 1
initcall vesafb_init+0x0/0x9c returned -19 after 30 usecs
calling efifb_init+0x0/0x8e @ 1
initcall efifb_init+0x0/0x8e returned -19 after 2 usecs
calling intel_idle_init+0x0/0xd5 @ 1
intel_idle: does not run on family 6 model 42
initcall intel_idle_init+0x0/0xd5 returned -19 after 113 usecs
calling acpi_reserve_resources+0x0/0xeb @ 1
initcall acpi_reserve_resources+0x0/0xeb returned 0 after 3 usecs
calling irqrouter_init_ops+0x0/0x26 @ 1
initcall irqrouter_init_ops+0x0/0x26 returned 0 after 0 usecs
calling acpi_ac_init+0x0/0x45 @ 1
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (off-line)
initcall acpi_ac_init+0x0/0x45 returned 0 after 1063 usecs
calling acpi_button_init+0x0/0x12 @ 1
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
initcall acpi_button_init+0x0/0x12 returned 0 after 1940 usecs
calling acpi_fan_init+0x0/0x18 @ 1
initcall acpi_fan_init+0x0/0x18 returned 0 after 11 usecs
calling acpi_pci_slot_init+0x0/0x20 @ 1
initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 143 usecs
calling acpi_processor_init+0x0/0x7e @ 1
ACPI: Requesting acpi_cpufreq
initcall acpi_processor_init+0x0/0x7e returned 0 after 107377 usecs
calling acpi_container_init+0x0/0x4a @ 1
initcall acpi_container_init+0x0/0x4a returned 0 after 88451 usecs
calling acpi_thermal_init+0x0/0x42 @ 1
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
initcall acpi_thermal_init+0x0/0x42 returned 0 after 19492 usecs
calling acpi_battery_init+0x0/0x16 @ 1
initcall acpi_battery_init+0x0/0x16 returned 0 after 4 usecs
calling 1_acpi_battery_init_async+0x0/0x3c @ 5
calling acpi_hed_init+0x0/0x28 @ 1
initcall acpi_hed_init+0x0/0x28 returned 0 after 14 usecs
calling erst_init+0x0/0x2bb @ 1
initcall erst_init+0x0/0x2bb returned 0 after 0 usecs
calling ghes_init+0x0/0x170 @ 1
GHES: HEST is not enabled!
initcall ghes_init+0x0/0x170 returned -22 after 114 usecs
initcall ghes_init+0x0/0x170 returned with error code -22
calling xenbus_probe_initcall+0x0/0x3b @ 1
initcall xenbus_probe_initcall+0x0/0x3b returned 0 after 0 usecs
calling xenbus_init+0x0/0x3d @ 1
initcall xenbus_init+0x0/0x3d returned 0 after 56 usecs
calling xenbus_backend_init+0x0/0x4c @ 1
initcall xenbus_backend_init+0x0/0x4c returned 0 after 36 usecs
calling hypervisor_subsys_init+0x0/0x25 @ 1
initcall hypervisor_subsys_init+0x0/0x25 returned 0 after 0 usecs
calling hyper_sysfs_init+0x0/0xfb @ 1
initcall hyper_sysfs_init+0x0/0xfb returned 0 after 8 usecs
calling platform_pci_module_init+0x0/0x1b @ 1
initcall platform_pci_module_init+0x0/0x1b returned 0 after 10 usecs
calling xen_tmem_init+0x0/0x5c @ 1
initcall xen_tmem_init+0x0/0x5c returned 0 after 0 usecs
calling pty_init+0x0/0xd @ 1
initcall pty_init+0x0/0xd returned 0 after 43 usecs
calling sysrq_init+0x0/0x54 @ 1
initcall sysrq_init+0x0/0x54 returned 0 after 3 usecs
calling xen_hvc_init+0x0/0x225 @ 1
initcall xen_hvc_init+0x0/0x225 returned 0 after 487 usecs
calling serial8250_init+0x0/0x193 @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
initcall serial8250_init+0x0/0x193 returned 0 after 429 usecs
calling serial8250_pnp_init+0x0/0x12 @ 1
initcall serial8250_pnp_init+0x0/0x12 returned 0 after 135 usecs
calling serial8250_pci_init+0x0/0x1b @ 1
xen: registering gsi 17 triggering 0 polarity 1
Already setup the GSI :17
0000:00:16.3: ttyS0 at I/O 0x80a0 (irq = 17) is a 16550A
initcall serial8250_pci_init+0x0/0x1b returned 0 after 21025 usecs
calling init_kgdboc+0x0/0x16 @ 1
initcall init_kgdboc+0x0/0x16 returned 0 after 0 usecs
calling rand_initialize+0x0/0x40 @ 1
initcall rand_initialize+0x0/0x40 returned 0 after 12 usecs
calling raw_init+0x0/0x145 @ 1
initcall raw_init+0x0/0x145 returned 0 after 89 usecs
calling hpet_init+0x0/0x6a @ 1
hpet_acpi_add: no address or irqs in _CRS
initcall hpet_init+0x0/0x6a returned 0 after 1698 usecs
calling nvram_init+0x0/0x82 @ 1
Non-volatile memory driver v1.3
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 30648 usecs
initcall nvram_init+0x0/0x82 returned 0 after 571 usecs
calling agp_init+0x0/0x26 @ 1
Linux agpgart interface v0.103
initcall agp_init+0x0/0x26 returned 0 after 111 usecs
calling agp_amd64_mod_init+0x0/0x22 @ 1
initcall agp_amd64_mod_init+0x0/0x22 returned -19 after 18 usecs
calling agp_intel_init+0x0/0x29 @ 1
initcall agp_intel_init+0x0/0x29 returned 0 after 81 usecs
calling agp_sis_init+0x0/0x29 @ 1
initcall agp_sis_init+0x0/0x29 returned 0 after 7 usecs
calling agp_via_init+0x0/0x29 @ 1
initcall agp_via_init+0x0/0x29 returned 0 after 9 usecs
calling init_tis+0x0/0xc9 @ 1
initcall init_tis+0x0/0xc9 returned 0 after 13 usecs
calling drm_core_init+0x0/0x139 @ 1
[drm] Initialized drm 1.1.0 20060810
initcall drm_core_init+0x0/0x139 returned 0 after 127 usecs
calling cn_proc_init+0x0/0x3d @ 1
initcall cn_proc_init+0x0/0x3d returned 0 after 1 usecs
calling topology_sysfs_init+0x0/0x5a @ 1
initcall topology_sysfs_init+0x0/0x5a returned 0 after 26 usecs
calling brd_init+0x0/0x1d5 @ 1
brd: module loaded
initcall brd_init+0x0/0x1d5 returned 0 after 1263 usecs
calling loop_init+0x0/0x151 @ 1
loop: module loaded
initcall loop_init+0x0/0x151 returned 0 after 750 usecs
calling init_kgdbts+0x0/0x16 @ 1
initcall init_kgdbts+0x0/0x16 returned 0 after 0 usecs
calling mac_hid_init+0x0/0x22 @ 1
initcall mac_hid_init+0x0/0x22 returned 0 after 4 usecs
calling scsi_dh_init+0x0/0x3f @ 1
initcall scsi_dh_init+0x0/0x3f returned 0 after 0 usecs
calling init_mtd+0x0/0xce @ 1
initcall init_mtd+0x0/0xce returned 0 after 70 usecs
calling cmdline_parser_init+0x0/0x12 @ 1
initcall cmdline_parser_init+0x0/0x12 returned 0 after 0 usecs
calling net_olddevs_init+0x0/0x20 @ 1
initcall net_olddevs_init+0x0/0x20 returned 0 after 3 usecs
calling fixed_mdio_bus_init+0x0/0x12e @ 1
Fixed MDIO Bus: probed
initcall fixed_mdio_bus_init+0x0/0x12e returned 0 after 142 usecs
calling mv88e6060_init+0x0/0x14 @ 1
initcall mv88e6060_init+0x0/0x14 returned 0 after 0 usecs
calling mv88e6xxx_init+0x0/0x20 @ 1
initcall mv88e6xxx_init+0x0/0x20 returned 0 after 0 usecs
calling nonstatic_sysfs_init+0x0/0x12 @ 1
initcall nonstatic_sysfs_init+0x0/0x12 returned 0 after 0 usecs
calling mon_init+0x0/0xfe @ 1
initcall mon_init+0x0/0xfe returned 0 after 46 usecs
calling ehci_hcd_init+0x0/0xbe @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe3970000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.53-8.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
xen: registering gsi 17 triggering 0 polarity 1
Already setup the GSI :17
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe3950000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.4.53-8.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
initcall ehci_hcd_init+0x0/0xbe returned 0 after 24944 usecs
calling ohci_hcd_mod_init+0x0/0x84 @ 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
initcall ohci_hcd_mod_init+0x0/0x84 returned 0 after 121 usecs
calling uhci_hcd_init+0x0/0xce @ 1
uhci_hcd: USB Universal Host Controller Interface driver
initcall uhci_hcd_init+0x0/0xce returned 0 after 148 usecs
calling usb_usual_init+0x0/0x3e @ 1
usbcore: registered new interface driver libusual
initcall usb_usual_init+0x0/0x3e returned 0 after 127 usecs
calling i8042_init+0x0/0x6e @ 1
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0x6e returned 0 after 2131 usecs
calling serport_init+0x0/0x34 @ 1
initcall serport_init+0x0/0x34 returned 0 after 0 usecs
calling mousedev_init+0x0/0x61 @ 1
mousedev: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x61 returned 0 after 155 usecs
calling atkbd_init+0x0/0x27 @ 1
initcall atkbd_init+0x0/0x27 returned 0 after 9 usecs
calling psmouse_init+0x0/0x7b @ 1
initcall psmouse_init+0x0/0x7b returned 0 after 67 usecs
calling xenkbd_init+0x0/0x35 @ 1
initcall xenkbd_init+0x0/0x35 returned -19 after 0 usecs
calling cmos_init+0x0/0x6a @ 1
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
initcall cmos_init+0x0/0x6a returned 0 after 663 usecs
calling ab8500_btemp_init+0x0/0x12 @ 1
initcall ab8500_btemp_init+0x0/0x12 returned 0 after 14 usecs
calling abx500_chargalg_init+0x0/0x12 @ 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
initcall abx500_chargalg_init+0x0/0x12 returned 0 after 301 usecs
calling init_ladder+0x0/0x12 @ 1
initcall init_ladder+0x0/0x12 returned -19 after 0 usecs
calling init_menu+0x0/0x12 @ 1
initcall init_menu+0x0/0x12 returned -19 after 0 usecs
calling efivars_init+0x0/0xfb @ 1
EFI Variables Facility v0.08 2004-May-17
initcall efivars_init+0x0/0xfb returned 0 after 111 usecs
calling hid_init+0x0/0x6d @ 1
initcall hid_init+0x0/0x6d returned 0 after 17 usecs
calling a4_init+0x0/0x1b @ 1
initcall a4_init+0x0/0x1b returned 0 after 6 usecs
calling apple_init+0x0/0x38 @ 1
initcall apple_init+0x0/0x38 returned 0 after 7 usecs
calling belkin_init+0x0/0x1b @ 1
initcall belkin_init+0x0/0x1b returned 0 after 5 usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after 4 usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after 5 usecs
calling cp_init+0x0/0x1b @ 1
initcall cp_init+0x0/0x1b returned 0 after 7 usecs
calling ez_init+0x0/0x1b @ 1
initcall ez_init+0x0/0x1b returned 0 after 4 usecs
calling ks_init+0x0/0x1b @ 1
initcall ks_init+0x0/0x1b returned 0 after 4 usecs
calling kye_init+0x0/0x1b @ 1
initcall kye_init+0x0/0x1b returned 0 after 5 usecs
calling lg_init+0x0/0x1b @ 1
initcall lg_init+0x0/0x1b returned 0 after 5 usecs
calling ms_init+0x0/0x1b @ 1
initcall ms_init+0x0/0x1b returned 0 after 306 usecs
calling mr_init+0x0/0x1b @ 1
initcall mr_init+0x0/0x1b returned 0 after 6 usecs
calling hid_init+0x0/0x78 @ 1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
initcall hid_init+0x0/0x78 returned 0 after 241 usecs
calling staging_init+0x0/0x8 @ 1
initcall staging_init+0x0/0x8 returned 0 after 0 usecs
calling zcache_init+0x0/0x1f7 @ 1
initcall zcache_init+0x0/0x1f7 returned 0 after 47 usecs
calling zs_init+0x0/0x90 @ 1
initcall zs_init+0x0/0x90 returned 0 after 10 usecs
calling sock_diag_init+0x0/0x36 @ 1
initcall sock_diag_init+0x0/0x36 returned 0 after 5 usecs
calling flow_cache_init_global+0x0/0x2d @ 1
initcall flow_cache_init_global+0x0/0x2d returned 0 after 27 usecs
calling blackhole_module_init+0x0/0x12 @ 1
initcall blackhole_module_init+0x0/0x12 returned 0 after 0 usecs
calling init_cgroup_cls+0x0/0x3c @ 1
initcall init_cgroup_cls+0x0/0x3c returned 0 after 0 usecs
calling xt_init+0x0/0x11a @ 1
initcall xt_init+0x0/0x11a returned 0 after 5 usecs
calling tcpudp_mt_init+0x0/0x17 @ 1
initcall tcpudp_mt_init+0x0/0x17 returned 0 after 0 usecs
calling sysctl_ipv4_init+0x0/0x8b @ 1
initcall sysctl_ipv4_init+0x0/0x8b returned 0 after 53 usecs
calling init_syncookies+0x0/0x19 @ 1
initcall init_syncookies+0x0/0x19 returned 0 after 15 usecs
calling ipv4_netfilter_init+0x0/0x20 @ 1
initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 66 usecs
calling cubictcp_register+0x0/0x5c @ 1
TCP: cubic registered
initcall cubictcp_register+0x0/0x5c returned 0 after 118 usecs
calling xfrm_user_init+0x0/0x4a @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x4a returned 0 after 117 usecs
calling unix_diag_init+0x0/0x12 @ 1
initcall unix_diag_init+0x0/0x12 returned 0 after 0 usecs
calling packet_init+0x0/0x47 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x47 returned 0 after 124 usecs
calling dsa_init_module+0x0/0x44 @ 1
initcall dsa_init_module+0x0/0x44 returned 0 after 6 usecs
calling dcbnl_init+0x0/0x4d @ 1
initcall dcbnl_init+0x0/0x4d returned 0 after 0 usecs
calling tboot_late_init+0x0/0xce @ 1
initcall tboot_late_init+0x0/0xce returned 0 after 0 usecs
calling mcheck_debugfs_init+0x0/0x3c @ 1
initcall mcheck_debugfs_init+0x0/0x3c returned 0 after 5 usecs
calling severities_debugfs_init+0x0/0x3c @ 1
initcall severities_debugfs_init+0x0/0x3c returned 0 after 1 usecs
calling hpet_insert_resource+0x0/0x23 @ 1
initcall hpet_insert_resource+0x0/0x23 returned 0 after 0 usecs
calling update_mp_table+0x0/0x247 @ 1
initcall update_mp_table+0x0/0x247 returned 0 after 0 usecs
calling lapic_insert_resource+0x0/0x3f @ 1
initcall lapic_insert_resource+0x0/0x3f returned 0 after 0 usecs
calling io_apic_bug_finalize+0x0/0x1b @ 1
initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
calling print_ICs+0x0/0x96 @ 1
initcall print_ICs+0x0/0x96 returned 0 after 0 usecs
calling check_early_ioremap_leak+0x0/0x65 @ 1
initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs
calling pat_memtype_list_init+0x0/0x32 @ 1
initcall pat_memtype_list_init+0x0/0x32 returned 0 after 0 usecs
calling init_oops_id+0x0/0x40 @ 1
initcall init_oops_id+0x0/0x40 returned 0 after 1 usecs
calling printk_late_init+0x0/0x59 @ 1
initcall printk_late_init+0x0/0x59 returned 0 after 0 usecs
calling sched_init_debug+0x0/0x24 @ 1
initcall sched_init_debug+0x0/0x24 returned 0 after 2 usecs
calling pm_qos_power_init+0x0/0x7b @ 1
initcall pm_qos_power_init+0x0/0x7b returned 0 after 97 usecs
calling pm_debugfs_init+0x0/0x24 @ 1
initcall pm_debugfs_init+0x0/0x24 returned 0 after 2 usecs
calling software_resume+0x0/0x310 @ 1
initcall software_resume+0x0/0x310 returned -2 after 0 usecs
initcall software_resume+0x0/0x310 returned with error code -2
calling debugfs_kprobe_init+0x0/0x90 @ 1
initcall debugfs_kprobe_init+0x0/0x90 returned 0 after 124 usecs
calling taskstats_init+0x0/0x95 @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x95 returned 0 after 180 usecs
calling clear_boot_tracer+0x0/0x2d @ 1
initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
calling max_swapfiles_check+0x0/0x8 @ 1
initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
calling set_recommended_min_free_kbytes+0x0/0xa0 @ 1
initcall set_recommended_min_free_kbytes+0x0/0xa0 returned 0 after 0 usecs
calling init_ima+0x0/0x15 @ 1
IMA: No TPM chip found, activating TPM-bypass!
initcall init_ima+0x0/0x15 returned 0 after 133 usecs
calling random32_reseed+0x0/0xb6 @ 1
initcall random32_reseed+0x0/0xb6 returned 0 after 18 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 1 usecs
calling pci_sysfs_init+0x0/0x51 @ 1
initcall pci_sysfs_init+0x0/0x51 returned 0 after 800 usecs
calling boot_wait_for_devices+0x0/0x30 @ 1
initcall boot_wait_for_devices+0x0/0x30 returned 0 after 0 usecs
calling regulator_init_complete+0x0/0x157 @ 1
initcall regulator_init_complete+0x0/0x157 returned 0 after 65 usecs
calling random_int_secret_init+0x0/0x19 @ 1
initcall random_int_secret_init+0x0/0x19 returned 0 after 7 usecs
calling deferred_probe_initcall+0x0/0x70 @ 1
initcall deferred_probe_initcall+0x0/0x70 returned 0 after 56 usecs
calling scsi_complete_async_scans+0x0/0x140 @ 1
initcall scsi_complete_async_scans+0x0/0x140 returned 0 after 0 usecs
calling rtc_hctosys+0x0/0x11b @ 1
rtc_cmos 00:06: setting system clock to 2013-10-13 19:47:03 UTC (1381693623)
initcall rtc_hctosys+0x0/0x11b returned 0 after 169 usecs
calling charger_manager_init+0x0/0x12 @ 1
initcall charger_manager_init+0x0/0x12 returned 0 after 7 usecs
calling memmap_init+0x0/0x38 @ 1
initcall memmap_init+0x0/0x38 returned 0 after 28 usecs
calling devfreq_start_polling+0x0/0x92 @ 1
initcall devfreq_start_polling+0x0/0x92 returned 0 after 36 usecs
calling pci_mmcfg_late_insert_resources+0x0/0x60 @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x60 returned 0 after 1 usecs
calling net_secret_init+0x0/0x19 @ 1
initcall net_secret_init+0x0/0x19 returned 0 after 7 usecs
calling init_net_drop_monitor+0x0/0x109 @ 1
Initializing network drop monitor service
initcall init_net_drop_monitor+0x0/0x109 returned 0 after 125 usecs
calling tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs
calling initialize_hashrnd+0x0/0x19 @ 1
initcall initialize_hashrnd+0x0/0x19 returned 0 after 1 usecs
async_waiting @ 1
async_continuing @ 1 after 0 usec
Freeing unused kernel memory: 1464k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 472k freed
Freeing unused kernel memory: 1424k freed
dracut: dracut-004-303.el6
calling dm_init+0x0/0x48 [dm_mod] @ 104
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
initcall dm_init+0x0/0x48 [dm_mod] returned 0 after 417 usecs
calling dm_dirty_log_init+0x0/0x59 [dm_log] @ 105
initcall dm_dirty_log_init+0x0/0x59 [dm_log] returned 0 after 0 usecs
calling dm_mirror_init+0x0/0x7a [dm_mirror] @ 105
initcall dm_mirror_init+0x0/0x7a [dm_mirror] returned 0 after 20 usecs
udev: starting version 147
udevd (110): /proc/110/oom_adj is deprecated, please use /proc/110/oom_score_adj instead.
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 1-1: new high-speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
calling acpi_video_init+0x0/0x8b [video] @ 195
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.4: new full-speed USB device number 3 using ehci_hcd
usb 1-1.4: New USB device found, idVendor=413c, idProduct=8187
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: DW375 Bluetooth Module
usb 1-1.4: Manufacturer: Dell Computer Corp
usb 1-1.4: SerialNumber: 60D819F89402
acpi device:2b: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:28/LNXVIDEO:00/input/input5
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
initcall acpi_video_init+0x0/0x8b [video] returned 0 after 235731 usecs
usb 1-1.5: new high-speed USB device number 4 using ehci_hcd
calling acpi_wmi_init+0x0/0x72 [wmi] @ 287
wmi: Mapper loaded
initcall acpi_wmi_init+0x0/0x72 [wmi] returned 0 after 176 usecs
calling fw_core_init+0x0/0xf0 [firewire_core] @ 297
initcall fw_core_init+0x0/0xf0 [firewire_core] returned 0 after 60 usecs
calling fw_ohci_init+0x0/0x20 [firewire_ohci] @ 297
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
firewire_ohci 0000:0b:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
initcall fw_ohci_init+0x0/0x20 [firewire_ohci] returned 0 after 50142 usecs
calling mmc_init+0x0/0x75 [mmc_core] @ 299
initcall mmc_init+0x0/0x75 [mmc_core] returned 0 after 31 usecs
calling sdhci_drv_init+0x0/0x24 [sdhci] @ 299
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
initcall sdhci_drv_init+0x0/0x24 [sdhci] returned 0 after 2 usecs
calling sdhci_drv_init+0x0/0x20 [sdhci_pci] @ 299
sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
0000:0b:00.1 supply vmmc not found, using dummy regulator
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:0b:00.1] using DMA
sdhci-pci 0000:0b:00.1: could not set regulator OCR (-22)
initcall sdhci_drv_init+0x0/0x20 [sdhci_pci] returned 0 after 2067 usecs
calling ahci_init+0x0/0x20 [ahci] @ 303
ahci 0000:00:1f.2: version 3.0
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
ahci: SSS flag set, parallel bus scan disabled
usb 1-1.5: New USB device found, idVendor=05ca, idProduct=181e
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
usb 1-1.5: Manufacturer: CN0CJ3P272487184C317A00
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xe3940000 port 0xe3940100 irq 313
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xe3940000 port 0xe3940280 irq 313
ata5: SATA max UDMA/133 abar m2048@0xe3940000 port 0xe3940300 irq 313
ata6: SATA max UDMA/133 abar m2048@0xe3940000 port 0xe3940380 irq 313
initcall ahci_init+0x0/0x20 [ahci] returned 0 after 17845 usecs
sdhci-pci 0000:0b:00.1: could not set regulator OCR (-22)
sdhci-pci 0000:0b:00.1: could not set regulator OCR (-22)
usb 1-1.6: new full-speed USB device number 5 using ehci_hcd
sdhci-pci 0000:0b:00.1: could not set regulator OCR (-22)
usb 1-1.6: New USB device found, idVendor=1b96, idProduct=0006
usb 1-1.6: New USB device strings: Mfr=6, Product=5, SerialNumber=4
usb 1-1.6: Product: DuoSense
usb 1-1.6: Manufacturer: N-trig
usb 1-1.6: SerialNumber: 09.12.02.38.16
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input6
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7
usb 2-1.6: new high-speed USB device number 3 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 2-1.6: config 1 has an invalid interface number: 6 but max is 5
usb 2-1.6: config 1 has an invalid interface number: 7 but max is 5
usb 2-1.6: config 1 has an invalid interface number: 7 but max is 5
usb 2-1.6: config 1 has no interface number 3
usb 2-1.6: config 1 has no interface number 5
usb 2-1.6: New USB device found, idVendor=1410, idProduct=9010
usb 2-1.6: New USB device strings: Mfr=4, Product=3, SerialNumber=5
usb 2-1.6: Product: Novatel Wireless 4G
usb 2-1.6: Manufacturer: Novatel Wireless, Inc.
usb 2-1.6: SerialNumber: 990000940137391
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
usb 2-1.8: new full-speed USB device number 4 using ehci_hcd
ata1.00: ATA-8: TOSHIBA MK5061GSYN, MH000D, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5061GS MH00 PQ: 0 ANSI: 5
firewire_core 0000:0b:00.0: created device fw0: GUID 034a4ac1464fc000, S400
usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5801
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.8: Product: 5880
usb 2-1.8: Manufacturer: Broadcom Corp
usb 2-1.8: SerialNumber: 0123456789ABCD
usb 2-1.8: config 0 descriptor??
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-U633J, D600, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633J D600 PQ: 0 ANSI: 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
calling aes_init+0x0/0x12 [aes_generic] @ 330
initcall aes_init+0x0/0x12 [aes_generic] returned 0 after 76 usecs
calling aes_init+0x0/0x12 [aes_x86_64] @ 330
initcall aes_init+0x0/0x12 [aes_x86_64] returned 0 after 61 usecs
calling cryptd_init+0x0/0xca [cryptd] @ 330
initcall cryptd_init+0x0/0xca [cryptd] returned 0 after 4 usecs
calling aesni_init+0x0/0x1f8 [aesni_intel] @ 330
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
initcall aesni_init+0x0/0x1f8 [aesni_intel] returned 0 after 3637 usecs
calling init_sd+0x0/0x177 [sd_mod] @ 386
initcall init_sd+0x0/0x177 [sd_mod] returned 0 after 92 usecs
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
calling cdrom_init+0x0/0x6f [cdrom] @ 387
initcall cdrom_init+0x0/0x6f [cdrom] returned 0 after 6 usecs
calling init_sr+0x0/0x46 [sr_mod] @ 387
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
initcall init_sr+0x0/0x46 [sr_mod] returned 0 after 2441 usecs
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input8
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input9
calling dm_crypt_init+0x0/0x69 [dm_crypt] @ 427
initcall dm_crypt_init+0x0/0x69 [dm_crypt] returned 0 after 24 usecs
calling crypto_module_init+0x0/0x12 [xts] @ 449
initcall crypto_module_init+0x0/0x12 [xts] returned 0 after 0 usecs
calling wait_scan_init+0x0/0x12 [scsi_wait_scan] @ 481
initcall wait_scan_init+0x0/0x12 [scsi_wait_scan] returned 0 after 0 usecs
dracut: Scanning devices dm-0 for LVM logical volumes VolGroup-Swap/LogVol00 VolGroup/LogVol00
dracut: inactive '/dev/VolGroup/LogVol00' [195.31 GiB] inherit
dracut: Volume group "VolGroup-Swap" not found
dracut: Skipping volume group VolGroup-Swap
calling wait_scan_init+0x0/0x12 [scsi_wait_scan] @ 577
initcall wait_scan_init+0x0/0x12 [scsi_wait_scan] returned 0 after 0 usecs
dracut: Scanning devices dm-0 dm-3 for LVM logical volumes VolGroup-Swap/LogVol00 VolGroup/LogVol00
dracut: inactive '/dev/VolGroup-Swap/LogVol00' [15.97 GiB] inherit
dracut: ACTIVE '/dev/VolGroup/LogVol00' [195.31 GiB] inherit
calling journal_init+0x0/0x36 [jbd2] @ 608
initcall journal_init+0x0/0x36 [jbd2] returned 0 after 115 usecs
calling init_mbcache+0x0/0x14 [mbcache] @ 608
initcall init_mbcache+0x0/0x14 [mbcache] returned 0 after 0 usecs
calling ext4_init_fs+0x0/0x1fe [ext4] @ 608
initcall ext4_init_fs+0x0/0x1fe [ext4] returned 0 after 134 usecs
EXT4-fs (dm-2): INFO: recovery required on readonly filesystem
EXT4-fs (dm-2): write access will be enabled during recovery
EXT4-fs (dm-2): recovery complete
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/luks-f99ac8f4-dd8a-48f6-853c-d2f5788262cd
dracut: Loading SELinux policy
type=1404 audit(1381693641.264:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 276421 rules.
SELinux: 2048 avtab hash slots, 276421 rules.
SELinux: 9 users, 12 roles, 3889 types, 201 bools, 1 sens, 1024 cats
SELinux: 81 classes, 276421 rules
SELinux: Permission audit_access in class file not defined in policy.
SELinux: Permission audit_access in class dir not defined in policy.
SELinux: Permission execmod in class dir not defined in policy.
SELinux: Permission audit_access in class lnk_file not defined in policy.
SELinux: Permission open in class lnk_file not defined in policy.
SELinux: Permission execmod in class lnk_file not defined in policy.
SELinux: Permission audit_access in class chr_file not defined in policy.
SELinux: Permission audit_access in class blk_file not defined in policy.
SELinux: Permission execmod in class blk_file not defined in policy.
SELinux: Permission audit_access in class sock_file not defined in policy.
SELinux: Permission execmod in class sock_file not defined in policy.
SELinux: Permission audit_access in class fifo_file not defined in policy.
SELinux: Permission execmod in class fifo_file not defined in policy.
SELinux: Permission syslog in class capability2 not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev dm-2, type ext4), uses xattr
type=1403 audit(1381693641.857:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
WARNING! power/level is deprecated; use power/control instead
calling e1000_init_module+0x0/0x43 [e1000e] @ 1279
e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
xen: registering gsi 20 triggering 0 polarity 1
xen: --> pirq=20 -> irq=20 (gsi=20)
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) d0:67:e5:39:ed:b5
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0041FF-0FF
initcall e1000_init_module+0x0/0x43 [e1000e] returned 0 after 1833277 usecs
calling amd_iommu_v2_init+0x0/0xdb [amd_iommu_v2] @ 3753
AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
AMD IOMMUv2 functionality not available on this sytem
initcall amd_iommu_v2_init+0x0/0xdb [amd_iommu_v2] returned 0 after 229 usecs
udev: renamed network interface eth0 to em1
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
calling firegl_init_module+0x0/0x3ba [fglrx] @ 3753
[fglrx] Maximum main memory to use for locked dma buffers: 30868 MBytes.
[fglrx] vendor: 1002 device: 6740 count: 1
[fglrx] ioport: bar 4, base 0x7000, size: 0x100
xen: registering gsi 16 triggering 0 polarity 1
Already setup the GSI :16
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.20.5 [Sep 21 2013] with 1 minors
initcall firegl_init_module+0x0/0x3ba [fglrx] returned 0 after 1696 usecs
calling snd_mem_init+0x0/0x2c [snd_page_alloc] @ 3762
initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 3 usecs
calling init_soundcore+0x0/0x9b [soundcore] @ 3762
initcall init_soundcore+0x0/0x9b [soundcore] returned 0 after 10 usecs
calling alsa_sound_init+0x0/0x87 [snd] @ 3762
initcall alsa_sound_init+0x0/0x87 [snd] returned 0 after 11 usecs
calling alsa_timer_init+0x0/0xbe [snd_timer] @ 3762
initcall alsa_timer_init+0x0/0xbe [snd_timer] returned 0 after 4714 usecs
calling alsa_pcm_init+0x0/0x71 [snd_pcm] @ 3765
initcall alsa_pcm_init+0x0/0x71 [snd_pcm] returned 0 after 4 usecs
calling alsa_seq_device_init+0x0/0x60 [snd_seq_device] @ 3766
initcall alsa_seq_device_init+0x0/0x60 [snd_seq_device] returned 0 after 2 usecs
calling alsa_seq_init+0x0/0x4c [snd_seq] @ 3766
initcall alsa_seq_init+0x0/0x4c [snd_seq] returned 0 after 87 usecs
calling alsa_hwdep_init+0x0/0x69 [snd_hwdep] @ 3762
initcall alsa_hwdep_init+0x0/0x69 [snd_hwdep] returned 0 after 3 usecs
calling alsa_card_azx_init+0x0/0x20 [snd_hda_intel] @ 3762
xen: registering gsi 22 triggering 0 polarity 1
xen: --> pirq=22 -> irq=22 (gsi=22)
calling patch_sigmatel_init+0x0/0x12 [snd_hda_codec_idt] @ 3770
initcall patch_sigmatel_init+0x0/0x12 [snd_hda_codec_idt] returned 0 after 0 usecs
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
xen: registering gsi 17 triggering 0 polarity 1
Already setup the GSI :17
calling patch_hdmi_init+0x0/0x12 [snd_hda_codec_hdmi] @ 3773
initcall patch_hdmi_init+0x0/0x12 [snd_hda_codec_hdmi] returned 0 after 0 usecs
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
initcall alsa_card_azx_init+0x0/0x20 [snd_hda_intel] returned 0 after 81740 usecs
calling rfkill_init+0x0/0x79 [rfkill] @ 3776
initcall rfkill_init+0x0/0x79 [rfkill] returned 0 after 476 usecs
calling cfg80211_init+0x0/0xc9 [cfg80211] @ 3776
cfg80211: Calling CRDA to update world regulatory domain
initcall cfg80211_init+0x0/0xc9 [cfg80211] returned 0 after 238 usecs
calling ieee80211_init+0x0/0x3b [mac80211] @ 3776
initcall ieee80211_init+0x0/0x3b [mac80211] returned 0 after 96 usecs
calling iwl_init+0x0/0x90 [iwlwifi] @ 3776
Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Copyright(c) 2003-2012 Intel Corporation
xen: registering gsi 17 triggering 0 polarity 1
Already setup the GSI :17
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc90007ed0000
iwlwifi 0000:03:00.0: HW Revision ID = 0x35
initcall iwl_init+0x0/0x90 [iwlwifi] returned 0 after 1212 usecs
calling xhci_hcd_init+0x0/0x2c [xhci_hcd] @ 3791
xen: registering gsi 19 triggering 0 polarity 1
Already setup the GSI :19
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.4.53-8.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:0a:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.4.53-8.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:0a:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
initcall xhci_hcd_init+0x0/0x2c [xhci_hcd] returned 0 after 14453 usecs
calling iTCO_vendor_init_module+0x0/0x1c [iTCO_vendor_support] @ 3794
iTCO_vendor_support: vendor-support=0
initcall iTCO_vendor_init_module+0x0/0x1c [iTCO_vendor_support] returned 0 after 111 usecs
calling iTCO_wdt_init_module+0x0/0x9d [iTCO_wdt] @ 3794
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
initcall iTCO_wdt_init_module+0x0/0x9d [iTCO_wdt] returned 0 after 622 usecs
calling i2c_i801_init+0x0/0xd5 [i2c_i801] @ 3809
xen: registering gsi 18 triggering 0 polarity 1
Already setup the GSI :18
ACPI Warning: 0x0000000000008000-0x000000000000801f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
initcall i2c_i801_init+0x0/0xd5 [i2c_i801] returned 0 after 753 usecs
calling pcspkr_platform_driver_init+0x0/0x12 [pcspkr] @ 3822
input: PC Speaker as /devices/platform/pcspkr/input/input15
initcall pcspkr_platform_driver_init+0x0/0x12 [pcspkr] returned 0 after 319 usecs
iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: device EEPROM VER=0x43a, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0x1F0
iwlwifi 0000:03:00.0: Valid Tx ant: 0x7, Valid Rx ant: 0x7
iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
Registered led device: phy0-led
calling evdev_init+0x0/0x12 [evdev] @ 3824
initcall evdev_init+0x0/0x12 [evdev] returned 0 after 880 usecs
calling arc4_init+0x0/0x12 [arc4] @ 3829
initcall arc4_init+0x0/0x12 [arc4] returned 0 after 85 usecs
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
calling joydev_init+0x0/0x12 [joydev] @ 3830
initcall joydev_init+0x0/0x12 [joydev] returned 0 after 4 usecs
calling usb_serial_init+0x0/0x23b [usbserial] @ 3847
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
usbserial: USB Serial Driver core
initcall usb_serial_init+0x0/0x23b [usbserial] returned 0 after 622 usecs
calling option_driver_init+0x0/0x19 [option] @ 3847
usbcore: registered new interface driver option
USB Serial support registered for GSM modem (1-port)
option 2-1.6:1.0: GSM modem (1-port) converter detected
usb 2-1.6: GSM modem (1-port) converter now attached to ttyUSB0
option 2-1.6:1.1: GSM modem (1-port) converter detected
usb 2-1.6: GSM modem (1-port) converter now attached to ttyUSB1
option 2-1.6:1.2: GSM modem (1-port) converter detected
usb 2-1.6: GSM modem (1-port) converter now attached to ttyUSB2
option 2-1.6:1.4: GSM modem (1-port) converter detected
usb 2-1.6: GSM modem (1-port) converter now attached to ttyUSB3
initcall option_driver_init+0x0/0x19 [option] returned 0 after 2221 usecs
calling usbnet_init+0x0/0x2b [usbnet] @ 3868
initcall usbnet_init+0x0/0x2b [usbnet] returned 0 after 2 usecs
calling cdc_driver_init+0x0/0x20 [cdc_ether] @ 3868
cdc_ether 2-1.6:1.6: eth0: register 'cdc_ether' at usb-0000:00:1d.0-1.6, CDC Ethernet Device, 00:a0:c6:00:00:00
usbcore: registered new interface driver cdc_ether
initcall cdc_driver_init+0x0/0x20 [cdc_ether] returned 0 after 2195 usecs
calling bt_init+0x0/0x9d [bluetooth] @ 3896
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
initcall bt_init+0x0/0x9d [bluetooth] returned 0 after 711 usecs
calling btusb_driver_init+0x0/0x20 [btusb] @ 3896
usbcore: registered new interface driver btusb
initcall btusb_driver_init+0x0/0x20 [btusb] returned 0 after 479 usecs
calling media_devnode_init+0x0/0x89 [media] @ 3954
Linux media interface: v0.10
initcall media_devnode_init+0x0/0x89 [media] returned 0 after 124 usecs
calling videodev_init+0x0/0x89 [videodev] @ 3954
Linux video capture interface: v2.00
initcall videodev_init+0x0/0x89 [videodev] returned 0 after 127 usecs
calling uvc_init+0x0/0x4b [uvcvideo] @ 3954
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:181e)
input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
initcall uvc_init+0x0/0x4b [uvcvideo] returned 0 after 2776 usecs
calling ntrig_init+0x0/0x20 [hid_ntrig] @ 3958
ntrig 0003:1B96:0006.0001: hiddev0,hidraw0: USB HID v1.10 Device [N-trig DuoSense] on usb-0000:00:1a.0-1.6/input0
ntrig 0003:1B96:0006.0001: Firmware version: 1.12.2.38.0 (3012 d044)
input: N-trig DuoSense as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input17
input: N-trig DuoSense as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input18
input: N-trig DuoSense as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input19
ntrig 0003:1B96:0006.0002: input,hidraw1: USB HID v1.10 Device [N-trig DuoSense] on usb-0000:00:1a.0-1.6/input1
ntrig 0003:1B96:0006.0002: Firmware version: 1.12.2.38.0 (3012 d044)
initcall ntrig_init+0x0/0x20 [hid_ntrig] returned 0 after 4855 usecs
calling microcode_init+0x0/0x182 [microcode] @ 3964
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x28
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
initcall microcode_init+0x0/0x182 [microcode] returned 0 after 138877 usecs
microcode: CPU0 update to revision 0x29 failed
microcode: CPU1 update to revision 0x29 failed
microcode: CPU2 update to revision 0x29 failed
microcode: CPU3 update to revision 0x29 failed
microcode: CPU4 update to revision 0x29 failed
microcode: CPU5 update to revision 0x29 failed
microcode: CPU6 update to revision 0x29 failed
microcode: CPU7 update to revision 0x29 failed
microcode: CPU0 update to revision 0x29 failed
microcode: CPU1 update to revision 0x29 failed
microcode: CPU2 update to revision 0x29 failed
microcode: CPU3 update to revision 0x29 failed
microcode: CPU4 update to revision 0x29 failed
microcode: CPU5 update to revision 0x29 failed
microcode: CPU6 update to revision 0x29 failed
microcode: CPU7 update to revision 0x29 failed
microcode: CPU0 update to revision 0x29 failed
microcode: CPU1 update to revision 0x29 failed
microcode: CPU2 update to revision 0x29 failed
microcode: CPU3 update to revision 0x29 failed
microcode: CPU4 update to revision 0x29 failed
microcode: CPU5 update to revision 0x29 failed
microcode: CPU6 update to revision 0x29 failed
microcode: CPU7 update to revision 0x29 failed
microcode: CPU0 update to revision 0x29 failed
microcode: CPU1 update to revision 0x29 failed
microcode: CPU2 update to revision 0x29 failed
microcode: CPU3 update to revision 0x29 failed
microcode: CPU4 update to revision 0x29 failed
microcode: CPU5 update to revision 0x29 failed
microcode: CPU6 update to revision 0x29 failed
microcode: CPU7 update to revision 0x29 failed
microcode: CPU0 update to revision 0x29 failed
microcode: CPU1 update to revision 0x29 failed
microcode: CPU2 update to revision 0x29 failed
microcode: CPU3 update to revision 0x29 failed
microcode: CPU4 update to revision 0x29 failed
microcode: CPU5 update to revision 0x29 failed
microcode: CPU6 update to revision 0x29 failed
microcode: CPU7 update to revision 0x29 failed
microcode: CPU0 update to revision 0x29 failed
microcode: CPU1 update to revision 0x29 failed
microcode: CPU2 update to revision 0x29 failed
microcode: CPU3 update to revision 0x29 failed
microcode: CPU4 update to revision 0x29 failed
microcode: CPU5 update to revision 0x29 failed
microcode: CPU6 update to revision 0x29 failed
microcode: CPU7 update to revision 0x29 failed
calling ghash_pclmulqdqni_mod_init+0x0/0x55 [ghash_clmulni_intel] @ 3964
initcall ghash_pclmulqdqni_mod_init+0x0/0x55 [ghash_clmulni_intel] returned 0 after 4224 usecs
calling crc32c_intel_mod_init+0x0/0x2b [crc32c_intel] @ 3964
initcall crc32c_intel_mod_init+0x0/0x2b [crc32c_intel] returned 0 after 86 usecs
calling hwmon_init+0x0/0x4c [hwmon] @ 3964
initcall hwmon_init+0x0/0x4c [hwmon] returned 0 after 13 usecs
calling coretemp_init+0x0/0x80 [coretemp] @ 3964
initcall coretemp_init+0x0/0x80 [coretemp] returned 0 after 333 usecs
calling init_sg+0x0/0x12d [sg] @ 4123
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
initcall init_sg+0x0/0x12d [sg] returned 0 after 764 usecs
calling dcdbas_init+0x0/0x6a [dcdbas] @ 4173
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
initcall dcdbas_init+0x0/0x6a [dcdbas] returned 0 after 480 usecs
calling dell_init+0x0/0x33a [dell_laptop] @ 4173
initcall dell_init+0x0/0x33a [dell_laptop] returned 0 after 620 usecs
calling dell_wmi_init+0x0/0x92 [dell_wmi] @ 4180
input: Dell WMI hotkeys as /devices/virtual/input/input20
initcall dell_wmi_init+0x0/0x92 [dell_wmi] returned 0 after 360 usecs
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
microcode: CPU0 update to revision 0x29 failed
microcode: CPU1 update to revision 0x29 failed
microcode: CPU2 update to revision 0x29 failed
microcode: CPU3 update to revision 0x29 failed
microcode: CPU4 update to revision 0x29 failed
microcode: CPU5 update to revision 0x29 failed
microcode: CPU6 update to revision 0x29 failed
microcode: CPU7 update to revision 0x29 failed
calling parport_default_proc_register+0x0/0x1b [parport] @ 4488
initcall parport_default_proc_register+0x0/0x1b [parport] returned 0 after 7 usecs
calling parport_pc_init+0x0/0xa7 [parport_pc] @ 4488
parport_pc 00:08: [io 0x0378-0x037b]
parport_pc 00:08: [irq 5]
parport_pc 00:08: activated
parport_pc 00:08: reported by Plug and Play ACPI
parport_pc 00:08: disabled
initcall parport_pc_init+0x0/0xa7 [parport_pc] returned 0 after 75564 usecs
calling ppdev_init+0x0/0xd2 [ppdev] @ 4805
ppdev: user-space parallel port driver
initcall ppdev_init+0x0/0xd2 [ppdev] returned 0 after 7203 usecs
calling uinput_init+0x0/0x12 [uinput] @ 4856
initcall uinput_init+0x0/0x12 [uinput] returned 0 after 59 usecs
calling tun_init+0x0/0x93 [tun] @ 4862
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
initcall tun_init+0x0/0x93 [tun] returned 0 after 291 usecs
calling macvlan_init_module+0x0/0x3d [macvlan] @ 4862
initcall macvlan_init_module+0x0/0x3d [macvlan] returned 0 after 2 usecs
calling macvtap_init+0x0/0x110 [macvtap] @ 4862
initcall macvtap_init+0x0/0x110 [macvtap] returned 0 after 13 usecs
calling vhost_net_init+0x0/0x30 [vhost_net] @ 4862
initcall vhost_net_init+0x0/0x30 [vhost_net] returned 0 after 116 usecs
calling privcmd_init+0x0/0x3d [xen_privcmd] @ 4866
initcall privcmd_init+0x0/0x3d [xen_privcmd] returned 0 after 58 usecs
calling xenfs_init+0x0/0x2d [xenfs] @ 4866
initcall xenfs_init+0x0/0x2d [xenfs] returned 0 after 2 usecs
SELinux: initialized (dev xenfs, type xenfs), uses genfs_contexts
calling evtchn_init+0x0/0x77 [xen_evtchn] @ 4868
Event-channel device installed.
initcall evtchn_init+0x0/0x77 [xen_evtchn] returned 0 after 165 usecs
calling gntdev_init+0x0/0x4e [xen_gntdev] @ 4870
initcall gntdev_init+0x0/0x4e [xen_gntdev] returned 0 after 44 usecs
calling xen_blkif_init+0x0/0x25f [xen_blkback] @ 4872
initcall xen_blkif_init+0x0/0x25f [xen_blkback] returned 0 after 201 usecs
calling netback_init+0x0/0x239 [xen_netback] @ 4873
initcall netback_init+0x0/0x239 [xen_netback] returned 0 after 473 usecs
calling blktap_init+0x0/0x40 [blktap] @ 4884
blktap_device_init: blktap device major 252
blktap_ring_init: blktap ring major: 246
initcall blktap_init+0x0/0x40 [blktap] returned 0 after 493 usecs
calling xen_acpi_processor_init+0x0/0x2f6 [xen_acpi_processor] @ 4885
initcall xen_acpi_processor_init+0x0/0x2f6 [xen_acpi_processor] returned 0 after 2074 usecs
calling wait_scan_init+0x0/0x12 [scsi_wait_scan] @ 4894
initcall wait_scan_init+0x0/0x12 [scsi_wait_scan] returned 0 after 2 usecs
EXT4-fs (dm-2): re-mounted. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda1, type ext4), uses xattr
Adding 16742396k swap on /dev/mapper/luks-3cac8466-a0bc-4f79-ae3e-beb86ed321f4. Priority:-1 extents:1 across:16742396k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts