SHOW:
|
|
- or go back to the newest paste.
1 | here is smartctl output for sdc, sdb & sda in this order. | |
2 | ||
3 | root@rescue ~ # smartctl --all /dev/sdc | |
4 | smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.16] (local build) | |
5 | Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
6 | ||
7 | === START OF INFORMATION SECTION === | |
8 | Device Model: ST_M13FQBL | |
9 | Serial Number: QNR_BFW | |
10 | Firmware Version: 1117F38F | |
11 | User Capacity: 4,142,054,400 bytes [4.14 GB] | |
12 | Sector Size: 512 bytes logical/physical | |
13 | Device is: Not in smartctl database [for details use: -P showall] | |
14 | ATA Version is: 6 | |
15 | ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 | |
16 | Local Time is: Mon Nov 18 14:42:22 2013 CET | |
17 | SMART support is: Available - device has SMART capability. | |
18 | SMART support is: Enabled | |
19 | ||
20 | Error SMART Values Read failed: scsi error aborted command | |
21 | Smartctl: SMART Read Values failed. | |
22 | ||
23 | === START OF READ SMART DATA SECTION === | |
24 | SMART overall-health self-assessment test result: UNKNOWN! | |
25 | SMART Status, Attributes and Thresholds cannot be read. | |
26 | ||
27 | Error SMART Error Log Read failed: scsi error aborted command | |
28 | Smartctl: SMART Error Log Read Failed | |
29 | Error SMART Error Self-Test Log Read failed: scsi error aborted command | |
30 | Smartctl: SMART Self Test Log Read Failed | |
31 | Device does not support Selective Self Tests/Logging | |
32 | root@rescue ~ # smartctl --all /dev/sdb | |
33 | smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.16] (local build) | |
34 | Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
35 | ||
36 | === START OF INFORMATION SECTION === | |
37 | Model Family: Seagate Barracuda 7200.11 | |
38 | Device Model: ST31500341AS | |
39 | Serial Number: 9VS48G74 | |
40 | LU WWN Device Id: 5 000c50 026b5ba18 | |
41 | Firmware Version: CC1H | |
42 | User Capacity: 1,500,301,910,016 bytes [1.50 TB] | |
43 | Sector Size: 512 bytes logical/physical | |
44 | Device is: In smartctl database [for details use: -P show] | |
45 | ATA Version is: 8 | |
46 | ATA Standard is: ATA-8-ACS revision 4 | |
47 | Local Time is: Mon Nov 18 14:42:28 2013 CET | |
48 | SMART support is: Available - device has SMART capability. | |
49 | SMART support is: Enabled | |
50 | ||
51 | === START OF READ SMART DATA SECTION === | |
52 | SMART overall-health self-assessment test result: PASSED | |
53 | ||
54 | General SMART Values: | |
55 | Offline data collection status: (0x82) Offline data collection activity | |
56 | was completed without error. | |
57 | Auto Offline Data Collection: Enabled. | |
58 | Self-test execution status: ( 0) The previous self-test routine completed | |
59 | without error or no self-test has ever | |
60 | been run. | |
61 | Total time to complete Offline | |
62 | data collection: ( 617) seconds. | |
63 | Offline data collection | |
64 | capabilities: (0x7b) SMART execute Offline immediate. | |
65 | Auto Offline data collection on/off support. | |
66 | Suspend Offline collection upon new | |
67 | command. | |
68 | Offline surface scan supported. | |
69 | Self-test supported. | |
70 | Conveyance Self-test supported. | |
71 | Selective Self-test supported. | |
72 | SMART capabilities: (0x0003) Saves SMART data before entering | |
73 | power-saving mode. | |
74 | Supports SMART auto save timer. | |
75 | Error logging capability: (0x01) Error logging supported. | |
76 | General Purpose Logging supported. | |
77 | Short self-test routine | |
78 | recommended polling time: ( 1) minutes. | |
79 | Extended self-test routine | |
80 | recommended polling time: ( 255) minutes. | |
81 | Conveyance self-test routine | |
82 | recommended polling time: ( 2) minutes. | |
83 | SCT capabilities: (0x103f) SCT Status supported. | |
84 | SCT Error Recovery Control supported. | |
85 | SCT Feature Control supported. | |
86 | SCT Data Table supported. | |
87 | ||
88 | SMART Attributes Data Structure revision number: 10 | |
89 | Vendor Specific SMART Attributes with Thresholds: | |
90 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
91 | 1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail Always - 87196730 | |
92 | 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0 | |
93 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 15 | |
94 | 5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 60 | |
95 | 7 Seek_Error_Rate 0x000f 090 060 030 Pre-fail Always - 1007030093 | |
96 | 9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 27148 | |
97 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
98 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 15 | |
99 | 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
100 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
101 | 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 274882101315 | |
102 | 189 High_Fly_Writes 0x003a 021 021 000 Old_age Always - 79 | |
103 | 190 Airflow_Temperature_Cel 0x0022 062 052 045 Old_age Always - 38 (Min/Max 38/38) | |
104 | 194 Temperature_Celsius 0x0022 038 048 000 Old_age Always - 38 (0 22 0 0) | |
105 | 195 Hardware_ECC_Recovered 0x001a 042 036 000 Old_age Always - 87196730 | |
106 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
107 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
108 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
109 | 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 213021787974155 | |
110 | 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 4170770584 | |
111 | 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1652554606 | |
112 | ||
113 | SMART Error Log Version: 1 | |
114 | No Errors Logged | |
115 | ||
116 | SMART Self-test log structure revision number 1 | |
117 | No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
118 | ||
119 | ||
120 | SMART Selective self-test log data structure revision number 1 | |
121 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
122 | 1 0 0 Not_testing | |
123 | 2 0 0 Not_testing | |
124 | 3 0 0 Not_testing | |
125 | 4 0 0 Not_testing | |
126 | 5 0 0 Not_testing | |
127 | Selective self-test flags (0x0): | |
128 | After scanning selected spans, do NOT read-scan remainder of disk. | |
129 | If Selective self-test is pending on power-up, resume after 0 minute delay. | |
130 | ||
131 | root@rescue ~ # smartctl --all /dev/sda | |
132 | smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.16] (local build) | |
133 | Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
134 | ||
135 | === START OF INFORMATION SECTION === | |
136 | Model Family: Seagate Barracuda 7200.11 | |
137 | Device Model: ST31500341AS | |
138 | Serial Number: 9VS49LPR | |
139 | LU WWN Device Id: 5 000c50 026c5211f | |
140 | Firmware Version: CC1H | |
141 | User Capacity: 1,500,301,910,016 bytes [1.50 TB] | |
142 | Sector Size: 512 bytes logical/physical | |
143 | Device is: In smartctl database [for details use: -P show] | |
144 | ATA Version is: 8 | |
145 | ATA Standard is: ATA-8-ACS revision 4 | |
146 | Local Time is: Mon Nov 18 14:42:36 2013 CET | |
147 | SMART support is: Available - device has SMART capability. | |
148 | SMART support is: Enabled | |
149 | ||
150 | === START OF READ SMART DATA SECTION === | |
151 | SMART overall-health self-assessment test result: FAILED! | |
152 | Drive failure expected in less than 24 hours. SAVE ALL DATA. | |
153 | See vendor-specific Attribute list for failed Attributes. | |
154 | ||
155 | General SMART Values: | |
156 | Offline data collection status: (0x82) Offline data collection activity | |
157 | was completed without error. | |
158 | Auto Offline Data Collection: Enabled. | |
159 | Self-test execution status: ( 0) The previous self-test routine completed | |
160 | without error or no self-test has ever | |
161 | been run. | |
162 | Total time to complete Offline | |
163 | data collection: ( 609) seconds. | |
164 | Offline data collection | |
165 | capabilities: (0x7b) SMART execute Offline immediate. | |
166 | Auto Offline data collection on/off support. | |
167 | Suspend Offline collection upon new | |
168 | command. | |
169 | Offline surface scan supported. | |
170 | Self-test supported. | |
171 | Conveyance Self-test supported. | |
172 | Selective Self-test supported. | |
173 | SMART capabilities: (0x0003) Saves SMART data before entering | |
174 | power-saving mode. | |
175 | Supports SMART auto save timer. | |
176 | Error logging capability: (0x01) Error logging supported. | |
177 | General Purpose Logging supported. | |
178 | Short self-test routine | |
179 | recommended polling time: ( 1) minutes. | |
180 | Extended self-test routine | |
181 | recommended polling time: ( 255) minutes. | |
182 | Conveyance self-test routine | |
183 | recommended polling time: ( 2) minutes. | |
184 | SCT capabilities: (0x103f) SCT Status supported. | |
185 | SCT Error Recovery Control supported. | |
186 | SCT Feature Control supported. | |
187 | SCT Data Table supported. | |
188 | ||
189 | SMART Attributes Data Structure revision number: 10 | |
190 | Vendor Specific SMART Attributes with Thresholds: | |
191 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
192 | 1 Raw_Read_Error_Rate 0x000f 105 087 006 Pre-fail Always - 187486275 | |
193 | 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0 | |
194 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 8 | |
195 | 5 Reallocated_Sector_Ct 0x0033 001 001 036 Pre-fail Always FAILING_NOW 4095 | |
196 | 7 Seek_Error_Rate 0x000f 086 057 030 Pre-fail Always - 9457085579 | |
197 | 9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 27078 | |
198 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
199 | 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 8 | |
200 | 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
201 | 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 400 | |
202 | 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 420913217663 | |
203 | 189 High_Fly_Writes 0x003a 028 028 000 Old_age Always - 72 | |
204 | 190 Airflow_Temperature_Cel 0x0022 063 046 045 Old_age Always - 37 (Min/Max 26/37) | |
205 | 194 Temperature_Celsius 0x0022 037 054 000 Old_age Always - 37 (0 24 0 0) | |
206 | 195 Hardware_ECC_Recovered 0x001a 044 038 000 Old_age Always - 187486275 | |
207 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
208 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
209 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
210 | 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 20328080239046 | |
211 | 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3230313850 | |
212 | 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 535643002 | |
213 | ||
214 | SMART Error Log Version: 1 | |
215 | ATA Error Count: 224 (device log contains only the most recent five errors) | |
216 | CR = Command Register [HEX] | |
217 | FR = Features Register [HEX] | |
218 | SC = Sector Count Register [HEX] | |
219 | SN = Sector Number Register [HEX] | |
220 | CL = Cylinder Low Register [HEX] | |
221 | CH = Cylinder High Register [HEX] | |
222 | DH = Device/Head Register [HEX] | |
223 | DC = Device Command Register [HEX] | |
224 | ER = Error register [HEX] | |
225 | ST = Status register [HEX] | |
226 | Powered_Up_Time is measured from power on, and printed as | |
227 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
228 | SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
229 | ||
230 | Error 224 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours) | |
231 | When the command that caused the error occurred, the device was active or idle. | |
232 | ||
233 | After command completion occurred, registers were: | |
234 | ER ST SC SN CL CH DH | |
235 | -- -- -- -- -- -- -- | |
236 | 04 71 04 9d 00 32 e0 | |
237 | ||
238 | Commands leading to the command that caused the error were: | |
239 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
240 | -- -- -- -- -- -- -- -- ---------------- -------------------- | |
241 | ec 00 01 00 00 00 a0 00 11d+08:50:46.614 IDENTIFY DEVICE | |
242 | ff 00 00 00 00 00 00 00 11d+08:50:46.575 [VENDOR SPECIFIC] | |
243 | 00 00 00 00 00 00 00 ff 11d+08:50:46.575 NOP [Abort queued commands] | |
244 | ff 00 00 00 00 00 00 00 11d+08:50:44.093 [VENDOR SPECIFIC] | |
245 | 00 00 00 00 00 00 00 ff 11d+08:50:44.093 NOP [Abort queued commands] | |
246 | ||
247 | Error 223 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours) | |
248 | When the command that caused the error occurred, the device was active or idle. | |
249 | ||
250 | After command completion occurred, registers were: | |
251 | ER ST SC SN CL CH DH | |
252 | -- -- -- -- -- -- -- | |
253 | 04 71 04 9d 00 32 e0 Device Fault; Error: ABRT | |
254 | ||
255 | Commands leading to the command that caused the error were: | |
256 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
257 | -- -- -- -- -- -- -- -- ---------------- -------------------- | |
258 | a1 00 00 00 00 00 a0 00 11d+07:56:37.110 IDENTIFY PACKET DEVICE | |
259 | ec 00 00 00 00 00 a0 00 11d+07:56:37.103 IDENTIFY DEVICE | |
260 | ff 00 00 00 00 00 00 00 11d+07:56:36.774 [VENDOR SPECIFIC] | |
261 | 00 00 00 00 00 00 00 ff 11d+07:56:36.773 NOP [Abort queued commands] | |
262 | a1 00 00 00 00 00 a0 00 11d+07:56:31.758 IDENTIFY PACKET DEVICE | |
263 | ||
264 | Error 222 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours) | |
265 | When the command that caused the error occurred, the device was active or idle. | |
266 | ||
267 | After command completion occurred, registers were: | |
268 | ER ST SC SN CL CH DH | |
269 | -- -- -- -- -- -- -- | |
270 | 04 71 04 9d 00 32 e0 | |
271 | ||
272 | Commands leading to the command that caused the error were: | |
273 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
274 | -- -- -- -- -- -- -- -- ---------------- -------------------- | |
275 | ec 00 00 00 00 00 a0 00 11d+07:56:37.103 IDENTIFY DEVICE | |
276 | ff 00 00 00 00 00 00 00 11d+07:56:36.774 [VENDOR SPECIFIC] | |
277 | 00 00 00 00 00 00 00 ff 11d+07:56:36.773 NOP [Abort queued commands] | |
278 | a1 00 00 00 00 00 a0 00 11d+07:56:31.758 IDENTIFY PACKET DEVICE | |
279 | ec 00 00 00 00 00 a0 00 11d+07:56:31.751 IDENTIFY DEVICE | |
280 | ||
281 | Error 221 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours) | |
282 | When the command that caused the error occurred, the device was active or idle. | |
283 | ||
284 | After command completion occurred, registers were: | |
285 | ER ST SC SN CL CH DH | |
286 | -- -- -- -- -- -- -- | |
287 | 04 71 04 9d 00 32 e0 Device Fault; Error: ABRT | |
288 | ||
289 | Commands leading to the command that caused the error were: | |
290 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
291 | -- -- -- -- -- -- -- -- ---------------- -------------------- | |
292 | a1 00 00 00 00 00 a0 00 11d+07:56:31.758 IDENTIFY PACKET DEVICE | |
293 | ec 00 00 00 00 00 a0 00 11d+07:56:31.751 IDENTIFY DEVICE | |
294 | ff 00 00 00 00 00 00 00 11d+07:56:31.432 [VENDOR SPECIFIC] | |
295 | 00 00 00 00 00 00 00 ff 11d+07:56:31.432 NOP [Abort queued commands] | |
296 | a1 00 00 00 00 00 a0 00 11d+07:56:31.353 IDENTIFY PACKET DEVICE | |
297 | ||
298 | Error 220 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours) | |
299 | When the command that caused the error occurred, the device was active or idle. | |
300 | ||
301 | After command completion occurred, registers were: | |
302 | ER ST SC SN CL CH DH | |
303 | -- -- -- -- -- -- -- | |
304 | 04 71 04 9d 00 32 e0 | |
305 | ||
306 | Commands leading to the command that caused the error were: | |
307 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
308 | -- -- -- -- -- -- -- -- ---------------- -------------------- | |
309 | ec 00 00 00 00 00 a0 00 11d+07:56:31.751 IDENTIFY DEVICE | |
310 | ff 00 00 00 00 00 00 00 11d+07:56:31.432 [VENDOR SPECIFIC] | |
311 | 00 00 00 00 00 00 00 ff 11d+07:56:31.432 NOP [Abort queued commands] | |
312 | a1 00 00 00 00 00 a0 00 11d+07:56:31.353 IDENTIFY PACKET DEVICE | |
313 | ec 00 00 00 00 00 a0 00 11d+07:56:31.346 IDENTIFY DEVICE | |
314 | ||
315 | SMART Self-test log structure revision number 1 | |
316 | No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
317 | ||
318 | ||
319 | SMART Selective self-test log data structure revision number 1 | |
320 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
321 | 1 0 0 Not_testing | |
322 | 2 0 0 Not_testing | |
323 | 3 0 0 Not_testing | |
324 | 4 0 0 Not_testing | |
325 | 5 0 0 Not_testing | |
326 | Selective self-test flags (0x0): | |
327 | After scanning selected spans, do NOT read-scan remainder of disk. | |
328 | If Selective self-test is pending on power-up, resume after 0 minute delay. |