API tools faq
paste
View difference between Paste ID: 5nUJVNqz and Kuz2s2Xq
SHOW: | | - or go back to the newest paste.
1
root@overo:~$  dmesg
2
Initializing cgroup subsys cpuset
3
Initializing cgroup subsys cpu
4
Linux version 3.2.58-custom (vin@vin-virtual-linux) (gcc version 4.8.2 (GCC) ) #1 PREEMPT Sun Jun 1 03:52:59 BST 2014
5
CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c53c7d
6
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
7
Machine: Gumstix Overo
8
Reserving 12582912 bytes SDRAM for VRAM
9
Memory policy: ECC disabled, Data cache writeback
10
On node 0 totalpages: 35584
11
free_area_init_node: node 0, pgdat c06b99f0, node_mem_map c0751000
12
  Normal zone: 448 pages used for memmap
13
  Normal zone: 0 pages reserved
14
  Normal zone: 35136 pages, LIFO batch:7
15
OMAP3430/3530 ES3.1.2 (l2cache iva sgx neon isp 720mhz )
16
Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
17
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
18
pcpu-alloc: [0] 0
19
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 35136
20
Kernel command line: console=ttyO2,115200n8 mem=55M@0x80000000 mem=96M@0x88000000 i2c_bus=3,100 mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
21
PID hash table entries: 1024 (order: 0, 4096 bytes)
22
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
23
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
24
allocated 917504 bytes of page_cgroup
25
please try 'cgroup_disable=memory' option if you don't want memory cgroups
26
Memory: 55MB 84MB = 139MB total
27
Memory: 132492k/132492k available, 22132k reserved, 0K highmem
28
Virtual kernel memory layout:
29
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
30
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
31
    vmalloc : 0xce800000 - 0xf8000000   ( 664 MB)
32
    lowmem  : 0xc0000000 - 0xce000000   ( 224 MB)
33
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
34
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
35
      .text : 0xc0008000 - 0xc0633464   (6318 kB)
36
      .init : 0xc0634000 - 0xc0669000   ( 212 kB)
37
      .data : 0xc066a000 - 0xc06c3ab8   ( 359 kB)
38
       .bss : 0xc06c3adc - 0xc07507b0   ( 564 kB)
39
NR_IRQS:410
40
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
41
Total of 96 interrupts on 1 active controller
42
OMAP clockevent source: GPTIMER1 at 32768 Hz
43
sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
44
Console: colour dummy device 80x30
45
Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
46
pid_max: default: 32768 minimum: 301
47
Mount-cache hash table entries: 512
48
Initializing cgroup subsys debug
49
Initializing cgroup subsys cpuacct
50
Initializing cgroup subsys memory
51
Initializing cgroup subsys devices
52
Initializing cgroup subsys freezer
53
Initializing cgroup subsys perf_event
54
CPU: Testing write buffer coherency: ok
55
devtmpfs: initialized
56
print_constraints: dummy:
57
NET: Registered protocol family 16
58
GPMC revision 5.0
59
OMAP GPIO hardware version 2.5
60
omap_mux_init: Add partition: #1: core, flags: 0
61
Reprogramming SDRC clock to 332000000 Hz
62
dpll3_m2_clk rate change failed: -22
63
Found NAND on CS0
64
Registering NAND on CS0
65
platform iva.0: Enabled OPP corresponding to 720MHz
66
hw-breakpoint: debug architecture 0x4 unsupported.
67
 omap-mcbsp.2: alias fck already exists
68
 omap-mcbsp.3: alias fck already exists
69
Calibrating delay loop (skipped) already calibrated this CPU
70
Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
71
OMAP DMA hardware revision 4.0
72
bio: create slab <bio-0> at 0
73
machine_constraints_voltage: vads7846: override min_uV, 1 -> 3300000
74
machine_constraints_voltage: vads7846: override max_uV, 2147483647 -> 3300000
75
print_constraints: vads7846: 3300 mV
76
reg-fixed-voltage reg-fixed-voltage.1: vads7846 supplying 3300000uV
77
SCSI subsystem initialized
78
usbcore: registered new interface driver usbfs
79
usbcore: registered new interface driver hub
80
usbcore: registered new device driver usb
81
omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz
82
twl4030: PIH (irq 7) chaining IRQs 368..375
83
twl4030: power (irq 373) chaining IRQs 376..383
84
twl4030: gpio (irq 368) chaining IRQs 384..401
85
machine_constraints_voltage: VUSB1V5: override min_uV, 1 -> 1500000
86
machine_constraints_voltage: VUSB1V5: override max_uV, 2147483647 -> 1500000
87
print_constraints: VUSB1V5: 1500 mV normal standby
88
machine_constraints_voltage: VUSB1V8: override min_uV, 1 -> 1800000
89
machine_constraints_voltage: VUSB1V8: override max_uV, 2147483647 -> 1800000
90
print_constraints: VUSB1V8: 1800 mV normal standby
91
machine_constraints_voltage: VUSB3V1: override min_uV, 1 -> 3100000
92
machine_constraints_voltage: VUSB3V1: override max_uV, 2147483647 -> 3100000
93
print_constraints: VUSB3V1: 3100 mV normal standby
94
twl4030_usb twl4030_usb: HW_CONDITIONS 0x10/16; link 0
95
twl4030_usb twl4030_usb: Initialized TWL4030 USB module
96
print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
97
print_constraints: VDAC: 1800 mV normal standby
98
print_constraints: VDVI: 1800 mV normal standby
99
omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 100 kHz
100
omap-iommu omap-iommu.0: isp registered
101
Advanced Linux Sound Architecture Driver Version 1.0.24.
102
Switching to clocksource 32k_counter
103
musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
104
twl4030_usb twl4030_usb: twl4030_phy_resume
105
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
106
musb-hdrc: MHDRC RTL version 1.400
107
musb-hdrc: setup fifo_mode 4
108
musb-hdrc: 28/31 max ep, 16384/16384 memory
109
musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
110
NET: Registered protocol family 2
111
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
112
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
113
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
114
TCP: Hash tables configured (established 8192 bind 8192)
115
TCP reno registered
116
UDP hash table entries: 256 (order: 0, 4096 bytes)
117
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
118
NET: Registered protocol family 1
119
RPC: Registered named UNIX socket transport module.
120
RPC: Registered udp transport module.
121
RPC: Registered tcp transport module.
122
RPC: Registered tcp NFSv4.1 backchannel transport module.
123
platform iva.0: Enabled OPP corresponding to 720MHz
124
audit: initializing netlink socket (disabled)
125
type=2000 audit(0.148:1): initialized
126
VFS: Disk quotas dquot_6.5.2
127
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
128
Registering unionfs 2.5.10 (for 3.1.0-rc4)
129
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
130
fuse init (API version 7.17)
131
msgmni has been set to 258
132
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
133
io scheduler noop registered
134
io scheduler deadline registered (default)
135
OMAP DSS rev 2.0
136
omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
137
omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
138
omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
139
console [ttyO2] enabled
140
brd: module loaded
141
loop: module loaded
142
twl4030_madc twl4030_madc: clk disabled, enabling
143
omap2-nand driver initializing
144
ONFI flash detected
145
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
146
Creating 5 MTD partitions on "omap2-nand.0":
147
0x000000000000-0x000000080000 : "xloader"
148
0x000000080000-0x000000240000 : "uboot"
149
0x000000240000-0x000000280000 : "uboot environment"
150
0x000000280000-0x000000680000 : "linux"
151
0x000000680000-0x000020000000 : "rootfs"
152
smsc911x: Driver version 2008-10-21
153
smsc911x-mdio: probed
154
smsc911x smsc911x.0: eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
155
smsc911x smsc911x.0: eth0: MAC Address: 00:af:c1:00:03:02
156
smsc911x: Driver version 2008-10-21
157
usbcore: registered new interface driver kaweth
158
usbcore: registered new interface driver asix
159
usbcore: registered new interface driver cdc_ether
160
cdc_ncm: 04-Aug-2011
161
usbcore: registered new interface driver cdc_ncm
162
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
163
ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
164
ehci-omap ehci-omap.0: failed to get ehci port1 regulator
165
ehci-omap ehci-omap.0: phy reset operation timed out
166
ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
167
ehci-omap ehci-omap.0: reset hcc_params 0016 thresh 1 uframes 256/512/1024 park
168
ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
169
/home/vin/yocto/build/tmp/work/overo-poky-linux-gnueabi/linux-gumstix/3.2-r0/git/drivers/usb/core/inode.c: creating file 'devices'
170
/home/vin/yocto/build/tmp/work/overo-poky-linux-gnueabi/linux-gumstix/3.2-r0/git/drivers/usb/core/inode.c: creating file '001'
171
ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
172
ehci-omap ehci-omap.0: park 0
173
ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
174
ehci-omap ehci-omap.0: reset command 0080b02  park=3 ithresh=8 period=1024 Reset HALT
175
ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
176
ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
177
usb usb1: default language 0x0409
178
usb usb1: udev 1, busnum 1, minor = 0
179
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
180
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
181
usb usb1: Product: OMAP-EHCI Host Controller
182
usb usb1: Manufacturer: Linux 3.2.58-custom ehci_hcd
183
usb usb1: SerialNumber: ehci-omap.0
184
usb usb1: usb_probe_device
185
usb usb1: configuration #1 chosen from 1 choice
186
usb usb1: adding 1-0:1.0 (config #1, interface 0)
187
hub 1-0:1.0: usb_probe_interface
188
hub 1-0:1.0: usb_probe_interface - got id
189
hub 1-0:1.0: USB hub found
190
hub 1-0:1.0: 3 ports detected
191
hub 1-0:1.0: standalone hub
192
hub 1-0:1.0: individual port power switching
193
hub 1-0:1.0: individual port over-current protection
194
hub 1-0:1.0: power on to power good time: 20ms
195
hub 1-0:1.0: local power source is good
196
hub 1-0:1.0: enabling power on all ports
197
/home/vin/yocto/build/tmp/work/overo-poky-linux-gnueabi/linux-gumstix/3.2-r0/git/drivers/usb/core/inode.c: creating file '001'
198
ehci-omap ehci-omap.0: ...powerup ports...
199
Initializing USB Mass Storage driver...
200
usbcore: registered new interface driver usb-storage
201
USB Mass Storage support registered.
202
mousedev: PS/2 mouse device common for all mice
203
twl_rtc twl_rtc: Power up reset detected.
204
twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
205
i2c /dev entries driver
206
cpuidle: using governor ladder
207
cpuidle: using governor menu
208
hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
209
Registered led device: overo:red:gpio21
210
Registered led device: overo:blue:gpio22
211
Registered led device: overo:blue:COM
212
usbcore: registered new interface driver usbhid
213
usbhid: USB HID core driver
214
usbcore: registered new interface driver snd-usb-audio
215
overo SoC init
216
asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
217
ALSA device list:
218
  #0: overo
219
oprofile: hardware counters not available
220
oprofile: using timer interrupt.
221
TCP cubic registered
222
NET: Registered protocol family 17
223
NET: Registered protocol family 15
224
Registering the dns_resolver key type
225
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
226
ThumbEE CPU extension supported.
227
sr_init: No PMIC hook to init smartreflex
228
smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
229
smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
230
clock: disabling unused clocks to save power
231
registered taskstats version 1
232
fbcvt: 1024x768@60: CVT Name - .786M3-R
233
Console: switching to colour frame buffer device 128x48
234
regulator_init_complete: VDAC: incomplete constraints, leaving on
235
regulator_init_complete: vads7846: incomplete constraints, leaving on
236
twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:10 UTC (946684810)
237
Waiting for root device /dev/mmcblk0p2...
238
mmc0: host does not support reading read-only switch. assuming write-enable.
239
mmc0: new high speed SDHC card at address 59b4
240
mmcblk0: mmc0:59b4 00000 3.67 GiB
241
 mmcblk0: p1 p2
242
kjournald starting.  Commit interval 5 seconds
243
EXT3-fs (mmcblk0p2): using internal journal
244
EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
245
VFS: Mounted root (ext3 filesystem) on device 179:2.
246
devtmpfs: mounted
247
Freeing init memory: 212K
248
systemd[1]: systemd 211 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
249
systemd[1]: Detected architecture 'arm'.
250
NET: Registered protocol family 10
251
systemd[1]: Inserted module 'ipv6'
252
systemd[1]: Set hostname to <overo>.
253
systemd[1]: [/etc/systemd/system/network@.service:1] Assignment outside of section. Ignoring.
254
systemd[1]: [/etc/systemd/system/network@.service:2] Assignment outside of section. Ignoring.
255
systemd[1]: [/etc/systemd/system/network@.service:3] Assignment outside of section. Ignoring.
256
systemd[1]: [/etc/systemd/system/network@.service:4] Assignment outside of section. Ignoring.
257
systemd[1]: [/etc/systemd/system/network@.service:5] Assignment outside of section. Ignoring.
258
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
259
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
260
systemd[1]: Expecting device dev-ttyGS0.device...
261
systemd[1]: Expecting device dev-ttyO2.device...
262
systemd[1]: Starting Remote File Systems.
263
systemd[1]: Reached target Remote File Systems.
264
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
265
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
266
systemd[1]: Starting Paths.
267
systemd[1]: Reached target Paths.
268
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
269
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
270
systemd[1]: Starting Swap.
271
systemd[1]: Reached target Swap.
272
systemd[1]: Starting Root Slice.
273
systemd[1]: Created slice Root Slice.
274
systemd[1]: Starting Journal Socket.
275
systemd[1]: Listening on Journal Socket.
276
systemd[1]: Starting Delayed Shutdown Socket.
277
systemd[1]: Listening on Delayed Shutdown Socket.
278
systemd[1]: Starting udev Kernel Socket.
279
systemd[1]: Listening on udev Kernel Socket.
280
systemd[1]: Starting udev Control Socket.
281
systemd[1]: Listening on udev Control Socket.
282
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
283
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
284
systemd[1]: Starting Syslog Socket.
285
hub 1-0:1.0: hub_suspend
286
usb usb1: bus auto-suspend, wakeup 1
287
ehci-omap ehci-omap.0: suspend root hub
288
systemd[1]: Listening on Syslog Socket.
289
systemd[1]: Starting User and Session Slice.
290
systemd[1]: Created slice User and Session Slice.
291
systemd[1]: Starting System Slice.
292
systemd[1]: Created slice System Slice.
293
systemd[1]: Started Set Up Additional Binary Formats.
294
systemd[1]: Mounting Debug File System...
295
systemd[1]: Starting Journal Service...
296
systemd[1]: Started Journal Service.
297
systemd-udevd[87]: starting version 211
298
systemd-journald[65]: Received request to flush runtime journal from PID 1
299
ads7846 spi1.0: touchscreen, irq 274
300
ads7846 spi1.0: no device detected, test read result was 0x00000000
301
smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce816000, IRQ: 336
302
eth0: IPv6 duplicate address fe80::2af:c1ff:fe00:302 detected!
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!