Pastebin launched a little side project called VERYVIRAL.com, check it out ;-) Want more features on Pastebin? Sign Up, it's FREE!
Guest

dmesg

By: a guest on Jul 20th, 2010  |  syntax: None  |  size: 46.47 KB  |  views: 50  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. Initializing cgroup subsys cpuset
  2. Initializing cgroup subsys cpu
  3. Linux version 2.6.33.6-147.fc13.i686.PAE (mockbuild@x86-14.phx2.fedoraproject.org) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Tue Jul 6 22:24:44 UTC 2010
  4. BIOS-provided physical RAM map:
  5.  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
  6.  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  7.  BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
  8.  BIOS-e820: 000000003ff70000 - 000000003ff72000 (ACPI NVS)
  9.  BIOS-e820: 000000003ff72000 - 000000003ff93000 (ACPI data)
  10.  BIOS-e820: 000000003ff93000 - 0000000040000000 (reserved)
  11.  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
  12.  BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
  13.  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
  14.  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
  15.  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
  16. Using x86 segment limits to approximate NX protection
  17. DMI 2.3 present.
  18. last_pfn = 0x3ff70 max_arch_pfn = 0x1000000
  19. MTRR default type: uncachable
  20. MTRR fixed ranges enabled:
  21.   00000-9FFFF write-back
  22.   A0000-BFFFF uncachable
  23.   C0000-DBFFF write-protect
  24.   DC000-EFFFF uncachable
  25.   F0000-FFFFF write-protect
  26. MTRR variable ranges enabled:
  27.   0 base 000000000 mask FC0000000 write-back
  28.   1 disabled
  29.   2 disabled
  30.   3 disabled
  31.   4 disabled
  32.   5 disabled
  33.   6 disabled
  34.   7 disabled
  35. x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  36. initial memory mapped : 0 - 01000000
  37. found SMP MP-table at [c00fe710] fe710
  38. init_memory_mapping: 0000000000000000-00000000375fe000
  39.  0000000000 - 0000200000 page 4k
  40.  0000200000 - 0037400000 page 2M
  41.  0037400000 - 00375fe000 page 4k
  42. kernel direct mapping tables up to 375fe000 @ 7000-f000
  43. RAMDISK: 37490000 - 37fefb9d
  44. Allocated new RAMDISK: 00b33000 - 01692b9d
  45. Move RAMDISK from 0000000037490000 - 0000000037fefb9c to 00b33000 - 01692b9c
  46. ACPI: RSDP 000feba0 00014 (v00 DELL  )
  47. ACPI: RSDT 000fd197 00038 (v01 DELL    GX270   00000008 ASL  00000061)
  48. ACPI: FACP 000fd1cf 00074 (v01 DELL    GX270   00000008 ASL  00000061)
  49. ACPI: DSDT fffd31a7 0277F (v01   DELL    dt_ex 00001000 MSFT 0100000D)
  50. ACPI: FACS 3ff70000 00040
  51. ACPI: SSDT fffd5a63 000BA (v01   DELL    st_ex 00001000 MSFT 0100000D)
  52. ACPI: APIC 000fd243 0006C (v01 DELL    GX270   00000008 ASL  00000061)
  53. ACPI: BOOT 000fd2af 00028 (v01 DELL    GX270   00000008 ASL  00000061)
  54. ACPI: ASF! 000fd2d7 00067 (v16 DELL    GX270   00000008 ASL  00000061)
  55. ACPI: Local APIC address 0xfee00000
  56. 137MB HIGHMEM available.
  57. 885MB LOWMEM available.
  58.   mapped low ram: 0 - 375fe000
  59.   low ram: 0 - 375fe000
  60.   node 0 low ram: 00000000 - 375fe000
  61.   node 0 bootmap 0000b000 - 00011ec0
  62. (14 early reservations) ==> bootmem [0000000000 - 00375fe000]
  63.   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  64.   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  65.   #2 [0000400000 - 0000b29834]    TEXT DATA BSS ==> [0000400000 - 0000b29834]
  66.   #3 [0000b2a000 - 0000b32190]              BRK ==> [0000b2a000 - 0000b32190]
  67.   #4 [00000fe720 - 0000100000]    BIOS reserved ==> [00000fe720 - 0000100000]
  68.   #5 [00000fe710 - 00000fe720]     MP-table mpf ==> [00000fe710 - 00000fe720]
  69.   #6 [000009fc00 - 00000f0000]    BIOS reserved ==> [000009fc00 - 00000f0000]
  70.   #7 [00000f01c0 - 00000fe710]    BIOS reserved ==> [00000f01c0 - 00000fe710]
  71.   #8 [00000f0000 - 00000f01c0]     MP-table mpc ==> [00000f0000 - 00000f01c0]
  72.   #9 [0000002000 - 0000003000]       TRAMPOLINE ==> [0000002000 - 0000003000]
  73.   #10 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
  74.   #11 [0000007000 - 000000b000]          PGTABLE ==> [0000007000 - 000000b000]
  75.   #12 [0000b33000 - 0001692b9d]      NEW RAMDISK ==> [0000b33000 - 0001692b9d]
  76.   #13 [000000b000 - 0000012000]          BOOTMAP ==> [000000b000 - 0000012000]
  77. Zone PFN ranges:
  78.   DMA      0x00000000 -> 0x00001000
  79.   Normal   0x00001000 -> 0x000375fe
  80.   HighMem  0x000375fe -> 0x0003ff70
  81. Movable zone start PFN for each node
  82. early_node_map[2] active PFN ranges
  83.     0: 0x00000000 -> 0x000000a0
  84.     0: 0x00000100 -> 0x0003ff70
  85. On node 0 totalpages: 261904
  86. free_area_init_node: node 0, pgdat c09b2c00, node_mem_map c1694000
  87.   DMA zone: 32 pages used for memmap
  88.   DMA zone: 0 pages reserved
  89.   DMA zone: 3968 pages, LIFO batch:0
  90.   Normal zone: 1740 pages used for memmap
  91.   Normal zone: 220978 pages, LIFO batch:31
  92.   HighMem zone: 275 pages used for memmap
  93.   HighMem zone: 34911 pages, LIFO batch:7
  94. Using APIC driver default
  95. ACPI: PM-Timer IO Port: 0x808
  96. ACPI: Local APIC address 0xfee00000
  97. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  98. ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
  99. ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
  100. ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
  101. ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  102. IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
  103. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  104. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  105. ACPI: IRQ0 used by override.
  106. ACPI: IRQ2 used by override.
  107. ACPI: IRQ9 used by override.
  108. Using ACPI (MADT) for SMP configuration information
  109. SMP: Allowing 4 CPUs, 3 hotplug CPUs
  110. nr_irqs_gsi: 24
  111. PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
  112. PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
  113. Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
  114. Booting paravirtualized kernel on bare hardware
  115. setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
  116. PERCPU: Embedded 15 pages/cpu @c2000000 s38040 r0 d23400 u524288
  117. pcpu-alloc: s38040 r0 d23400 u524288 alloc=1*2097152
  118. pcpu-alloc: [0] 0 1 2 3
  119. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259857
  120. Kernel command line: ro root=UUID=3c660274-cfd2-4a26-87e7-a7350f23e9e1 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet
  121. PID hash table entries: 4096 (order: 2, 16384 bytes)
  122. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  123. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  124. Enabling fast FPU save and restore... done.
  125. Enabling unmasked SIMD FPU exception support... done.
  126. Initializing CPU#0
  127. allocated 5240000 bytes of page_cgroup
  128. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  129. Initializing HighMem for node 0 (000375fe:0003ff70)
  130. Memory: 1013628k/1048000k available (3614k kernel code, 33436k reserved, 2353k data, 484k init, 140744k highmem)
  131. virtual kernel memory layout:
  132.     fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
  133.     pkmap   : 0xff600000 - 0xff800000   (2048 kB)
  134.     vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
  135.     lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
  136.       .init : 0xc09d5000 - 0xc0a4e000   ( 484 kB)
  137.       .data : 0xc0787bcc - 0xc09d4188   (2353 kB)
  138.       .text : 0xc0400000 - 0xc0787bcc   (3614 kB)
  139. Checking if this processor honours the WP bit even in supervisor mode...Ok.
  140. SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  141. Hierarchical RCU implementation.
  142. NR_IRQS:1280
  143. Console: colour dummy device 80x25
  144. console [tty0] enabled
  145. Fast TSC calibration using PIT
  146. Detected 2394.291 MHz processor.
  147. Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.58 BogoMIPS (lpj=2394291)
  148. Security Framework initialized
  149. SELinux:  Initializing.
  150. SELinux:  Starting in permissive mode
  151. Mount-cache hash table entries: 512
  152. Initializing cgroup subsys ns
  153. Initializing cgroup subsys cpuacct
  154. Initializing cgroup subsys memory
  155. Initializing cgroup subsys devices
  156. Initializing cgroup subsys freezer
  157. Initializing cgroup subsys net_cls
  158. Initializing cgroup subsys blkio
  159. CPU0: Hyper-Threading is disabled
  160. mce: CPU supports 4 MCE banks
  161. CPU0: Thermal monitoring enabled (TM1)
  162. Performance Events: no PMU driver, software events only.
  163. Checking 'hlt' instruction... OK.
  164. SMP alternatives: switching to UP code
  165. ACPI: Core revision 20091214
  166. Enabling APIC mode:  Flat.  Using 1 I/O APICs
  167. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  168. CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
  169. Brought up 1 CPUs
  170. Total of 1 processors activated (4788.58 BogoMIPS).
  171. sizeof(vma)=88 bytes
  172. sizeof(page)=32 bytes
  173. sizeof(inode)=352 bytes
  174. sizeof(dentry)=132 bytes
  175. sizeof(ext3inode)=508 bytes
  176. sizeof(buffer_head)=56 bytes
  177. sizeof(skbuff)=184 bytes
  178. sizeof(task_struct)=3252 bytes
  179. devtmpfs: initialized
  180. regulator: core version 0.5
  181. Time: 13:54:10  Date: 07/20/10
  182. NET: Registered protocol family 16
  183. ACPI: bus type pci registered
  184. PCI: PCI BIOS revision 2.10 entry at 0xfbab5, last bus=2
  185. PCI: Using configuration type 1 for base access
  186. bio: create slab <bio-0> at 0
  187. ACPI: EC: Look up EC in DSDT
  188. ACPI: Interpreter enabled
  189. ACPI: (supports S0 S1 S3 S4 S5)
  190. ACPI: Using IOAPIC for interrupt routing
  191. ACPI: No dock devices found.
  192. ACPI: PCI Root Bridge [PCI0] (0000:00)
  193. pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
  194. pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
  195. pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
  196. pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
  197. pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
  198. pci 0000:00:00.0: Enabling MCH 'Overflow' Device
  199. pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xc1ffffff pref]
  200. pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
  201. pci 0000:00:1d.0: reg 20: [io  0xff80-0xff9f]
  202. pci 0000:00:1d.1: reg 20: [io  0xff60-0xff7f]
  203. pci 0000:00:1d.2: reg 20: [io  0xff40-0xff5f]
  204. pci 0000:00:1d.3: reg 20: [io  0xff20-0xff3f]
  205. pci 0000:00:1d.7: reg 10: [mem 0xffa80800-0xffa80bff]
  206. pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  207. pci 0000:00:1d.7: PME# disabled
  208. pci 0000:00:1f.0: HPET at 0xfed00000
  209. pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO
  210. pci 0000:00:1f.0: quirk: [io  0x0880-0x08bf] claimed by ICH4 GPIO
  211. pci 0000:00:1f.1: reg 10: [io  0x01f0-0x01f7]
  212. pci 0000:00:1f.1: reg 14: [io  0x03f4-0x03f7]
  213. pci 0000:00:1f.1: reg 18: [io  0x0170-0x0177]
  214. pci 0000:00:1f.1: reg 1c: [io  0x0374-0x0377]
  215. pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
  216. pci 0000:00:1f.1: reg 24: [mem 0xfebffc00-0xfebfffff]
  217. pci 0000:00:1f.2: reg 10: [io  0xfe00-0xfe07]
  218. pci 0000:00:1f.2: reg 14: [io  0xfe10-0xfe13]
  219. pci 0000:00:1f.2: reg 18: [io  0xfe20-0xfe27]
  220. pci 0000:00:1f.2: reg 1c: [io  0xfe30-0xfe33]
  221. pci 0000:00:1f.2: reg 20: [io  0xfea0-0xfeaf]
  222. pci 0000:00:1f.3: reg 20: [io  0xeda0-0xedbf]
  223. pci 0000:00:1f.5: reg 10: [io  0xee00-0xeeff]
  224. pci 0000:00:1f.5: reg 14: [io  0xedc0-0xedff]
  225. pci 0000:00:1f.5: reg 18: [mem 0xfebffa00-0xfebffbff]
  226. pci 0000:00:1f.5: reg 1c: [mem 0xfebff900-0xfebff9ff]
  227. pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
  228. pci 0000:00:1f.5: PME# disabled
  229. pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
  230. pci 0000:01:00.0: reg 14: [io  0xde00-0xdeff]
  231. pci 0000:01:00.0: reg 18: [mem 0xfe9e0000-0xfe9effff]
  232. pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
  233. pci 0000:01:00.0: supports D1 D2
  234. pci 0000:01:00.1: reg 10: [mem 0xd0000000-0xdfffffff pref]
  235. pci 0000:01:00.1: reg 14: [mem 0xfe9f0000-0xfe9fffff]
  236. pci 0000:01:00.1: supports D1 D2
  237. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  238. pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
  239. pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
  240. pci 0000:00:01.0:   bridge window [mem 0xc2000000-0xefffffff pref]
  241. pci 0000:02:09.0: reg 10: [mem 0xfe8df800-0xfe8dffff]
  242. pci 0000:02:09.0: supports D1 D2
  243. pci 0000:02:0c.0: reg 10: [mem 0xfe8e0000-0xfe8fffff]
  244. pci 0000:02:0c.0: reg 18: [io  0xcf40-0xcf7f]
  245. pci 0000:02:0c.0: PME# supported from D0 D3hot D3cold
  246. pci 0000:02:0c.0: PME# disabled
  247. pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
  248. pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
  249. pci 0000:00:1e.0:   bridge window [mem 0xfe800000-0xfe8fffff]
  250. pci_bus 0000:00: on NUMA node 0
  251. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  252. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
  253. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
  254. ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
  255. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
  256. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
  257. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
  258. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
  259. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
  260. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
  261. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  262. vgaarb: loaded
  263. SCSI subsystem initialized
  264. libata version 3.00 loaded.
  265. usbcore: registered new interface driver usbfs
  266. usbcore: registered new interface driver hub
  267. usbcore: registered new device driver usb
  268. PCI: Using ACPI for IRQ routing
  269. PCI: pci_cache_line_size set to 64 bytes
  270. NetLabel: Initializing
  271. NetLabel:  domain hash size = 128
  272. NetLabel:  protocols = UNLABELED CIPSOv4
  273. NetLabel:  unlabeled traffic allowed by default
  274. hpet clockevent registered
  275. HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  276. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  277. hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  278. Switching to clocksource tsc
  279. pnp: PnP ACPI init
  280. ACPI: bus type pnp registered
  281. pnp 00:0a: disabling [io  0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
  282. pnp 00:0a: disabling [io  0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
  283. pnp: PnP ACPI: found 11 devices
  284. ACPI: ACPI bus type pnp unregistered
  285. system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
  286. system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved
  287. system 00:00: [mem 0x01000000-0x3ff6ffff] could not be reserved
  288. system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved
  289. system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
  290. system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
  291. system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
  292. system 00:00: [mem 0xfecf0000-0xfecf0fff] has been reserved
  293. system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
  294. system 00:00: [mem 0xffc00000-0xffffffff] has been reserved
  295. system 00:0a: [io  0x0c00-0x0c7f] has been reserved
  296. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  297. pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
  298. pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
  299. pci 0000:00:01.0:   bridge window [mem 0xc2000000-0xefffffff pref]
  300. pci 0000:00:1e.0: PCI bridge to [bus 02-02]
  301. pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
  302. pci 0000:00:1e.0:   bridge window [mem 0xfe800000-0xfe8fffff]
  303. pci 0000:00:1e.0:   bridge window [mem pref disabled]
  304. pci 0000:00:1e.0: setting latency timer to 64
  305. pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
  306. pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
  307. pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
  308. pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
  309. pci_bus 0000:01: resource 2 [mem 0xc2000000-0xefffffff pref]
  310. pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
  311. pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
  312. pci_bus 0000:02: resource 3 [io  0x0000-0xffff]
  313. pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffffffffffff]
  314. NET: Registered protocol family 2
  315. IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  316. TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  317. TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  318. TCP: Hash tables configured (established 131072 bind 65536)
  319. TCP reno registered
  320. UDP hash table entries: 512 (order: 2, 16384 bytes)
  321. UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  322. NET: Registered protocol family 1
  323. pci 0000:01:00.0: Boot video device
  324. PCI: CLS 64 bytes, default 64
  325. Trying to unpack rootfs image as initramfs...
  326. Freeing initrd memory: 11646k freed
  327. Simple Boot Flag at 0x7a set to 0x1
  328. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
  329. apm: overridden by ACPI.
  330. audit: initializing netlink socket (disabled)
  331. type=2000 audit(1279634050.916:1): initialized
  332. highmem bounce pool size: 64 pages
  333. HugeTLB registered 2 MB page size, pre-allocated 0 pages
  334. VFS: Disk quotas dquot_6.5.2
  335. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  336. msgmni has been set to 1728
  337. SELinux:  Registering netfilter hooks
  338. alg: No test for stdrng (krng)
  339. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  340. io scheduler noop registered
  341. io scheduler deadline registered
  342. io scheduler cfq registered (default)
  343. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  344. pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  345. acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  346. pci-stub: invalid id string ""
  347. input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  348. ACPI: Power Button [VBTN]
  349. input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  350. ACPI: Power Button [PWRF]
  351. isapnp: Scanning for PnP cards...
  352. isapnp: No Plug & Play device found
  353. Non-volatile memory driver v1.3
  354. Linux agpgart interface v0.103
  355. agpgart-intel 0000:00:00.0: Intel 865 Chipset
  356. agpgart-intel 0000:00:00.0: AGP aperture is 32M @ 0xc0000000
  357. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  358. serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  359. 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  360. brd: module loaded
  361. loop: module loaded
  362. input: Macintosh mouse button emulation as /devices/virtual/input/input2
  363. ata_piix 0000:00:1f.1: version 2.13
  364. ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  365. ata_piix 0000:00:1f.1: setting latency timer to 64
  366. scsi0 : ata_piix
  367. scsi1 : ata_piix
  368. ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
  369. ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
  370. ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  371. ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
  372. ata_piix 0000:00:1f.2: setting latency timer to 64
  373. scsi2 : ata_piix
  374. scsi3 : ata_piix
  375. ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18
  376. ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18
  377. Fixed MDIO Bus: probed
  378. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  379. ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
  380. ehci_hcd 0000:00:1d.7: setting latency timer to 64
  381. ehci_hcd 0000:00:1d.7: EHCI Host Controller
  382. ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  383. ehci_hcd 0000:00:1d.7: debug port 1
  384. ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
  385. ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80800
  386. ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  387. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  388. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  389. usb usb1: Product: EHCI Host Controller
  390. usb usb1: Manufacturer: Linux 2.6.33.6-147.fc13.i686.PAE ehci_hcd
  391. usb usb1: SerialNumber: 0000:00:1d.7
  392. hub 1-0:1.0: USB hub found
  393. hub 1-0:1.0: 8 ports detected
  394. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  395. uhci_hcd: USB Universal Host Controller Interface driver
  396. uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  397. uhci_hcd 0000:00:1d.0: setting latency timer to 64
  398. uhci_hcd 0000:00:1d.0: UHCI Host Controller
  399. uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  400. uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
  401. usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  402. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  403. usb usb2: Product: UHCI Host Controller
  404. usb usb2: Manufacturer: Linux 2.6.33.6-147.fc13.i686.PAE uhci_hcd
  405. usb usb2: SerialNumber: 0000:00:1d.0
  406. hub 2-0:1.0: USB hub found
  407. hub 2-0:1.0: 2 ports detected
  408. uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  409. uhci_hcd 0000:00:1d.1: setting latency timer to 64
  410. uhci_hcd 0000:00:1d.1: UHCI Host Controller
  411. uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  412. uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
  413. usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  414. usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  415. usb usb3: Product: UHCI Host Controller
  416. usb usb3: Manufacturer: Linux 2.6.33.6-147.fc13.i686.PAE uhci_hcd
  417. usb usb3: SerialNumber: 0000:00:1d.1
  418. hub 3-0:1.0: USB hub found
  419. hub 3-0:1.0: 2 ports detected
  420. uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  421. uhci_hcd 0000:00:1d.2: setting latency timer to 64
  422. uhci_hcd 0000:00:1d.2: UHCI Host Controller
  423. uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  424. uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
  425. usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  426. usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  427. usb usb4: Product: UHCI Host Controller
  428. usb usb4: Manufacturer: Linux 2.6.33.6-147.fc13.i686.PAE uhci_hcd
  429. usb usb4: SerialNumber: 0000:00:1d.2
  430. hub 4-0:1.0: USB hub found
  431. hub 4-0:1.0: 2 ports detected
  432. uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  433. uhci_hcd 0000:00:1d.3: setting latency timer to 64
  434. uhci_hcd 0000:00:1d.3: UHCI Host Controller
  435. uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  436. uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20
  437. usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  438. usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  439. usb usb5: Product: UHCI Host Controller
  440. usb usb5: Manufacturer: Linux 2.6.33.6-147.fc13.i686.PAE uhci_hcd
  441. usb usb5: SerialNumber: 0000:00:1d.3
  442. hub 5-0:1.0: USB hub found
  443. hub 5-0:1.0: 2 ports detected
  444. PNP: PS/2 Controller [PNP0f13:MOU] at 0x60,0x64 irq 12
  445. PNP: PS/2 controller doesn't have KBD irq; using default 1
  446. serio: i8042 KBD port at 0x60,0x64 irq 1
  447. serio: i8042 AUX port at 0x60,0x64 irq 12
  448. mice: PS/2 mouse device common for all mice
  449. rtc_cmos 00:05: RTC can wake from S4
  450. rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
  451. rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
  452. device-mapper: uevent: version 1.0.3
  453. device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
  454. cpuidle: using governor ladder
  455. cpuidle: using governor menu
  456. usbcore: registered new interface driver hiddev
  457. usbcore: registered new interface driver usbhid
  458. usbhid: USB HID core driver
  459. nf_conntrack version 0.5.0 (16028 buckets, 64112 max)
  460. CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  461. nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  462. sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  463. ip_tables: (C) 2000-2006 Netfilter Core Team
  464. TCP cubic registered
  465. Initializing XFRM netlink socket
  466. NET: Registered protocol family 17
  467. Using IPI No-Shortcut mode
  468. PM: Resume from disk failed.
  469. registered taskstats version 1
  470. No TPM chip found, activating TPM-bypass!
  471.   Magic number: 2:777:938
  472. rtc_cmos 00:05: setting system clock to 2010-07-20 13:54:11 UTC (1279634051)
  473. Initalizing network drop monitor service
  474. ata2.00: ATAPI: SAMSUNG DVD-ROM SD-616E, F501, max UDMA/33
  475. ata2.00: configured for UDMA/33
  476. ata1.00: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133
  477. ata1.00: 80293248 sectors, multi 8: LBA
  478. ata1.01: HPA detected: current 39062500, native 39063024
  479. ata1.01: ATA-5: WDC WD200BB-75DEA0, 05.03E05, max UDMA/100
  480. ata1.01: 39062500 sectors, multi 8: LBA
  481. ata1.00: configured for UDMA/100
  482. ata1.01: configured for UDMA/100
  483. scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6E040L0   NAR6 PQ: 0 ANSI: 5
  484. sd 0:0:0:0: Attached scsi generic sg0 type 0
  485. scsi 0:0:1:0: Direct-Access     ATA      WDC WD200BB-75DE 05.0 PQ: 0 ANSI: 5
  486. sd 0:0:1:0: Attached scsi generic sg1 type 0
  487. sd 0:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB)
  488. sd 0:0:0:0: [sda] Write Protect is off
  489. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  490. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  491.  sda:
  492. scsi 1:0:0:0: CD-ROM            SAMSUNG  DVD-ROM SD-616E  F501 PQ: 0 ANSI: 5
  493. sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
  494. Uniform CD-ROM driver Revision: 3.20
  495. sr 1:0:0:0: Attached scsi CD-ROM sr0
  496. sr 1:0:0:0: Attached scsi generic sg2 type 5
  497.  sda1 sda2
  498. psmouse serio1: ID: 10 00 64
  499. sd 0:0:0:0: [sda] Attached SCSI disk
  500. sd 0:0:1:0: [sdb] 39062500 512-byte logical blocks: (20.0 GB/18.6 GiB)
  501. sd 0:0:1:0: [sdb] Write Protect is off
  502. sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
  503. sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  504.  sdb: sdb1
  505. sd 0:0:1:0: [sdb] Attached SCSI disk
  506. usb 3-2: new full speed USB device using uhci_hcd and address 2
  507. usb 3-2: New USB device found, idVendor=045e, idProduct=001c
  508. usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  509. hub 3-2:1.0: USB hub found
  510. hub 3-2:1.0: 3 ports detected
  511. input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
  512. usb 3-2.1: new low speed USB device using uhci_hcd and address 3
  513. usb 3-2.1: New USB device found, idVendor=045e, idProduct=001d
  514. usb 3-2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  515. usb 3-2.1: Product: Microsoft Natural Keyboard Pro
  516. input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.1/3-2.1:1.0/input/input4
  517. generic-usb 0003:045E:001D.0001: input,hidraw0: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:00:1d.1-2.1/input0
  518. input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.1/3-2.1:1.1/input/input5
  519. generic-usb 0003:045E:001D.0002: input,hidraw1: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00:1d.1-2.1/input1
  520. Freeing unused kernel memory: 484k freed
  521. Write protecting the kernel text: 3616k
  522. Write protecting the kernel read-only data: 1768k
  523. dracut: dracut-005-3.fc13
  524. dracut: rd_NO_LUKS: removing cryptoluks activation
  525. dracut: rd_NO_LVM: removing LVM activation
  526. udev: starting version 151
  527. [drm] Initialized drm 1.1.0 20060810
  528. [drm] radeon defaulting to kernel modesetting.
  529. [drm] radeon kernel modesetting enabled.
  530. radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  531. [drm] radeon: Initializing kernel modesetting.
  532. [drm] register mmio base: 0xFE9E0000
  533. [drm] register mmio size: 65536
  534. [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
  535. [drm] Generation 2 PCI interface, using max accessible memory
  536. agpgart-intel 0000:00:00.0: AGP 3.0 bridge
  537. agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
  538. radeon 0000:01:00.0: putting AGP V3 device into 8x mode
  539. [drm] radeon: VRAM 256M
  540. [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
  541. [drm] radeon: GTT 32M
  542. [drm] radeon: GTT from 0xC0000000 to 0xC1FFFFFF
  543. [drm] radeon: irq initialized.
  544. [drm] Detected VRAM RAM=256M, BAR=256M
  545. [drm] RAM width 128bits DDR
  546. [TTM] Zone  kernel: Available graphics memory: 442782 kiB.
  547. [TTM] Zone highmem: Available graphics memory: 513154 kiB.
  548. [ttm] Initializing pool allocator.
  549. [drm] radeon: 256M of VRAM memory ready
  550. [drm] radeon: 32M of GTT memory ready.
  551. [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
  552. [drm] radeon: cp idle (0x10000C03)
  553. [drm] Loading R300 Microcode
  554. platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
  555. [drm] radeon: ring at 0x00000000C0000000
  556. [drm:r100_ring_test] *ERROR* radeon: ring test failed (sracth(0x15E4)=0xCAFEDEAD)
  557. [drm:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
  558. radeon 0000:01:00.0: failled initializing CP (-22).
  559. radeon 0000:01:00.0: Disabling GPU acceleration
  560. [drm:r100_cp_fini] *ERROR* Wait for CP idle timeout, shutting down CP.
  561. [drm] radeon: cp finalized
  562. [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
  563. [drm] radeon: cp finalized
  564. [ttm] Finilizing pool allocator.
  565. [TTM] Zone  kernel: Used memory at exit: 0 kiB.
  566. [TTM] Zone highmem: Used memory at exit: 0 kiB.
  567. [drm] radeon: ttm finalized
  568. [drm] Forcing AGP to PCI mode
  569. [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
  570. [drm] Generation 2 PCI interface, using max accessible memory
  571. [drm] radeon: VRAM 256M
  572. [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
  573. [drm] radeon: GTT 512M
  574. [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
  575. [drm] radeon: irq initialized.
  576. [drm] Detected VRAM RAM=256M, BAR=256M
  577. [drm] RAM width 128bits DDR
  578. [TTM] Zone  kernel: Available graphics memory: 442782 kiB.
  579. [TTM] Zone highmem: Available graphics memory: 513154 kiB.
  580. [ttm] Initializing pool allocator.
  581. kobject (f7ecac30): tried to init an initialized object, something is seriously wrong.
  582. Pid: 80, comm: modprobe Not tainted 2.6.33.6-147.fc13.i686.PAE #1
  583. Call Trace:
  584.  [<c078106e>] ? printk+0xf/0x11
  585.  [<c05a00dd>] kobject_init+0x2c/0x70
  586.  [<f7ec89ee>] ttm_page_alloc_init+0x188/0x1d5 [ttm]
  587.  [<f7ec3a18>] ttm_mem_global_init+0x311/0x345 [ttm]
  588.  [<f7f98c20>] radeon_ttm_mem_global_init+0xb/0xd [radeon]
  589.  [<f7ec77d6>] ttm_global_item_ref+0x3a/0x70 [ttm]
  590.  [<f7f98cfd>] radeon_ttm_init+0x47/0x2d8 [radeon]
  591.  [<f7f995e3>] radeon_bo_init+0x82/0x87 [radeon]
  592.  [<f7fb4e0d>] r300_init+0x171/0x231 [radeon]
  593.  [<f7f8bf26>] radeon_device_init+0x285/0x2be [radeon]
  594.  [<f7f8c81e>] radeon_driver_load_kms+0xd9/0x13b [radeon]
  595.  [<f7e7551c>] drm_get_dev+0x2f7/0x3ce [drm]
  596.  [<f7fd7cd8>] radeon_pci_probe+0xd/0xde [radeon]
  597.  [<c05b3c3e>] local_pci_probe+0xe/0x10
  598.  [<c05b4617>] pci_device_probe+0x43/0x66
  599.  [<c063f366>] driver_probe_device+0xc5/0x1cd
  600.  [<c063f4b1>] __driver_attach+0x43/0x5f
  601.  [<c063e9cd>] bus_for_each_dev+0x3d/0x67
  602.  [<c063f16a>] driver_attach+0x14/0x16
  603.  [<c063f46e>] ? __driver_attach+0x0/0x5f
  604.  [<c063ec36>] bus_add_driver+0xf9/0x23f
  605.  [<c05a040c>] ? kset_find_obj+0x23/0x4f
  606.  [<c063f6f2>] driver_register+0x7c/0xe3
  607.  [<c05b47ca>] __pci_register_driver+0x38/0x95
  608.  [<f7e7138a>] drm_init+0x5d/0xb5 [drm]
  609.  [<f8003000>] ? radeon_init+0x0/0xae [radeon]
  610.  [<f80030ac>] radeon_init+0xac/0xae [radeon]
  611.  [<c0403051>] do_one_initcall+0x4c/0x13a
  612.  [<c04666df>] sys_init_module+0xa7/0x1dc
  613.  [<c07830fc>] syscall_call+0x7/0xb
  614. [drm] radeon: 256M of VRAM memory ready
  615. [drm] radeon: 512M of GTT memory ready.
  616. [drm] GART: num cpu pages 131072, num gpu pages 131072
  617. [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
  618. [drm] radeon: cp idle (0x10000000)
  619. [drm] radeon: ring at 0x0000000020000000
  620. [drm] ring test succeeded in 1 usecs
  621. [drm] radeon: ib pool ready.
  622. [drm] ib test succeeded in 0 usecs
  623. [drm] Default TV standard: PAL
  624. [drm] 27.000000000 MHz TV ref clk
  625. [drm] DFP table revision: 3
  626. [drm] Default TV standard: PAL
  627. [drm] 27.000000000 MHz TV ref clk
  628. [drm] Radeon Display Connectors
  629. [drm] Connector 0:
  630. [drm]   VGA
  631. [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
  632. [drm]   Encoders:
  633. [drm]     CRT1: INTERNAL_DAC1
  634. [drm] Connector 1:
  635. [drm]   DVI-I
  636. [drm]   HPD1
  637. [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
  638. [drm]   Encoders:
  639. [drm]     CRT2: INTERNAL_DAC2
  640. [drm]     DFP1: INTERNAL_TMDS1
  641. [drm] Connector 2:
  642. [drm]   S-video
  643. [drm]   Encoders:
  644. [drm]     TV1: INTERNAL_DAC2
  645. [drm] fb mappable at 0xE0040000
  646. [drm] vram apper at 0xE0000000
  647. [drm] size 8294400
  648. [drm] fb depth is 24
  649. [drm]    pitch is 7680
  650. fbcon: radeondrmfb (fb0) is primary device
  651. Console: switching to colour frame buffer device 240x67
  652. fb0: radeondrmfb frame buffer device
  653. registered panic notifier
  654. [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
  655. dracut: Starting plymouth daemon
  656. dracut: rd_NO_DM: removing DM RAID activation
  657. dracut: rd_NO_MD: removing MD RAID activation
  658. EXT4-fs (sda1): mounted filesystem with ordered data mode
  659. dracut: Mounted root filesystem /dev/sda1
  660. dracut: Loading SELinux policy
  661. type=1404 audit(1279634055.889:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  662. SELinux: 2048 avtab hash slots, 196917 rules.
  663. SELinux: 2048 avtab hash slots, 196917 rules.
  664. SELinux:  9 users, 13 roles, 3276 types, 160 bools, 1 sens, 1024 cats
  665. SELinux:  77 classes, 196917 rules
  666. SELinux:  Completing initialization.
  667. SELinux:  Setting up existing superblocks.
  668. SELinux: initialized (dev sda1, type ext4), uses xattr
  669. SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  670. SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
  671. SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
  672. SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  673. SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
  674. SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
  675. SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  676. SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
  677. SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
  678. SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  679. SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  680. SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  681. SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
  682. SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  683. SELinux: initialized (dev proc, type proc), uses genfs_contexts
  684. SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
  685. SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  686. SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  687. type=1403 audit(1279634056.775:3): policy loaded auid=4294967295 ses=4294967295
  688. dracut: Switching root
  689. readahead: starting
  690. udev: starting version 151
  691. intel_rng: FWH not detected
  692. microcode: CPU0 sig=0xf29, pf=0x4, revision=0x2e
  693. microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  694. iTCO_vendor_support: vendor-support=0
  695. i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  696. iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
  697. iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
  698. iTCO_wdt: No card detected
  699. Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
  700. Copyright (c) 1999-2006 Intel Corporation.
  701. e1000 0000:02:0c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  702. dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
  703. e1000: 0000:02:0c.0: e1000_probe: (PCI:33MHz:32-bit) 00:0b:db:85:46:67
  704. e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
  705. parport_pc 00:09: reported by Plug and Play ACPI
  706. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
  707. type=1400 audit(1279634061.923:4): avc:  denied  { mmap_zero } for  pid=454 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
  708. ppdev: user-space parallel port driver
  709. Linux video capture interface: v2.00
  710. saa7130/34: v4l2 driver version 0.2.15 loaded
  711. saa7134 0000:02:09.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  712. saa7133[0]: found at 0000:02:09.0, rev: 209, irq: 18, latency: 64, mmio: 0xfe8df800
  713. saa7133[0]: subsystem: 1043:4845, board: ASUS TV-FM 7135 [card=53,autodetected]
  714. saa7133[0]: board init: gpio is 0
  715. IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
  716. saa7133[0]: i2c eeprom 00: 43 10 45 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
  717. saa7133[0]: i2c eeprom 10: 00 ff e2 0f ff 20 ff ff ff ff ff ff ff ff ff ff
  718. saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 88 ff ff ff ff
  719. saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  720. saa7133[0]: i2c eeprom 40: ff 22 00 c2 96 ff 02 30 15 ff ff ff ff ff ff ff
  721. saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  722. saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  723. saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  724. saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  725. saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  726. saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  727. saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  728. saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  729. saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  730. saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  731. saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  732. saa7133[0]: P7131 analog only, using entry of ASUSTeK P7131 Analog
  733. Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  734. Intel ICH 0000:00:1f.5: setting latency timer to 64
  735. tuner 3-004b: chip found @ 0x96 (saa7133[0])
  736. tda829x 3-004b: setting tuner address to 61
  737. tda829x 3-004b: type set to tda8290+75a
  738. intel8x0_measure_ac97_clock: measured 50870 usecs (2452 samples)
  739. intel8x0: clocking to 48000
  740. saa7133[0]: registered device video0 [v4l2]
  741. saa7133[0]: registered device vbi0
  742. saa7133[0]: registered device radio0
  743. saa7134 ALSA driver for DMA sound loaded
  744. IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
  745. saa7133[0]/alsa: saa7133[0] at 0xfe8df800 irq 18 registered as card -1
  746. EXT4-fs (sdb1): mounted filesystem with ordered data mode
  747. SELinux: initialized (dev sdb1, type ext4), uses xattr
  748. Adding 1023992k swap on /dev/sda2.  Priority:-1 extents:1 across:1023992k
  749. SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
  750. NET: Registered protocol family 10
  751. lo: Disabled Privacy Extensions
  752. ip6_tables: (C) 2000-2006 Netfilter Core Team
  753. p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
  754. ADDRCONF(NETDEV_UP): eth0: link is not ready
  755. e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
  756. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  757. RPC: Registered udp transport module.
  758. RPC: Registered tcp transport module.
  759. RPC: Registered tcp NFSv4.1 backchannel transport module.
  760. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
  761. eth0: no IPv6 routers present
  762. PM: Syncing filesystems ... done.
  763. PM: Preparing system for mem sleep
  764. Freezing user space processes ... (elapsed 0.01 seconds) done.
  765. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  766. PM: Entering mem sleep
  767. Suspending console(s) (use no_console_suspend to debug)
  768. sd 0:0:1:0: [sdb] Synchronizing SCSI cache
  769. sd 0:0:1:0: [sdb] Stopping disk
  770. sd 0:0:0:0: [sda] Synchronizing SCSI cache
  771. sd 0:0:0:0: [sda] Stopping disk
  772. parport_pc 00:09: disabled
  773. serial 00:08: disabled
  774. e1000 0000:02:0c.0: PCI INT A disabled
  775. e1000 0000:02:0c.0: PME# enabled
  776. pci 0000:00:1e.0: wake-up capability enabled by ACPI
  777. ACPI handle has no context!
  778. radeon 0000:01:00.0: PCI INT A disabled
  779. Intel ICH 0000:00:1f.5: PCI INT B disabled
  780. ata_piix 0000:00:1f.2: PCI INT A disabled
  781. ata_piix 0000:00:1f.1: PCI INT A disabled
  782. ehci_hcd 0000:00:1d.7: PCI INT D disabled
  783. uhci_hcd 0000:00:1d.3: PCI INT A disabled
  784. uhci_hcd 0000:00:1d.2: PCI INT C disabled
  785. uhci_hcd 0000:00:1d.1: PCI INT B disabled
  786. uhci_hcd 0000:00:1d.0: PCI INT A disabled
  787. PM: suspend of devices complete after 3986.385 msecs
  788. PM: late suspend of devices complete after 11.490 msecs
  789. ACPI: Preparing to enter system sleep state S3
  790. Disabling non-boot CPUs ...
  791. Back to C!
  792. ACPI: Waking up from system sleep state S3
  793. agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900006, writing 0x20900106)
  794. pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a0d0d0, writing 0x22a0d0d0)
  795. pci 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x14000)
  796. pci 0000:00:06.0: restoring config space at offset 0xf (was 0xffffffff, writing 0x0)
  797. pci 0000:00:06.0: restoring config space at offset 0xe (was 0xffffffff, writing 0x0)
  798. pci 0000:00:06.0: restoring config space at offset 0xd (was 0xffffffff, writing 0x0)
  799. pci 0000:00:06.0: restoring config space at offset 0xc (was 0xffffffff, writing 0x0)
  800. pci 0000:00:06.0: restoring config space at offset 0xb (was 0xffffffff, writing 0x0)
  801. pci 0000:00:06.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
  802. pci 0000:00:06.0: restoring config space at offset 0x9 (was 0xffffffff, writing 0x0)
  803. pci 0000:00:06.0: restoring config space at offset 0x8 (was 0xffffffff, writing 0x0)
  804. pci 0000:00:06.0: restoring config space at offset 0x7 (was 0xffffffff, writing 0x0)
  805. pci 0000:00:06.0: restoring config space at offset 0x6 (was 0xffffffff, writing 0x0)
  806. pci 0000:00:06.0: restoring config space at offset 0x5 (was 0xffffffff, writing 0x0)
  807. pci 0000:00:06.0: restoring config space at offset 0x4 (was 0xffffffff, writing 0xfecf0000)
  808. pci 0000:00:06.0: restoring config space at offset 0x3 (was 0xffffffff, writing 0x0)
  809. pci 0000:00:06.0: restoring config space at offset 0x2 (was 0xffffffff, writing 0x8800002)
  810. pci 0000:00:06.0: restoring config space at offset 0x1 (was 0xffffffff, writing 0x800002)
  811. pci 0000:00:06.0: restoring config space at offset 0x0 (was 0xffffffff, writing 0x25768086)
  812. uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
  813. uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  814. uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
  815. uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  816. uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x309)
  817. uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  818. uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x100, writing 0x10b)
  819. uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  820. ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x405)
  821. ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xffa80800)
  822. ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
  823. pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x0, writing 0x20000)
  824. pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xfe80fe80)
  825. pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x280c0c0)
  826. pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20200, writing 0x20020200)
  827. pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x800005, writing 0x800107)
  828. pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x280000f, writing 0x280010f)
  829. ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x109)
  830. ata_piix 0000:00:1f.1: restoring config space at offset 0x9 (was 0x0, writing 0xfebffc00)
  831. ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x100, writing 0x109)
  832. i801_smbus 0000:00:1f.3: restoring config space at offset 0xf (was 0x200, writing 0x203)
  833. i801_smbus 0000:00:1f.3: restoring config space at offset 0x8 (was 0x8c1, writing 0xeda1)
  834. Intel ICH 0000:00:1f.5: restoring config space at offset 0xf (was 0x200, writing 0x203)
  835. Intel ICH 0000:00:1f.5: restoring config space at offset 0x7 (was 0x0, writing 0xfebff900)
  836. Intel ICH 0000:00:1f.5: restoring config space at offset 0x6 (was 0x0, writing 0xfebffa00)
  837. Intel ICH 0000:00:1f.5: restoring config space at offset 0x5 (was 0x1, writing 0xedc1)
  838. Intel ICH 0000:00:1f.5: restoring config space at offset 0x4 (was 0x1, writing 0xee01)
  839. Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900003)
  840. radeon 0000:01:00.0: restoring config space at offset 0xf (was 0x801ff, writing 0x8010b)
  841. radeon 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfea00000)
  842. radeon 0000:01:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xfe9e0000)
  843. radeon 0000:01:00.0: restoring config space at offset 0x5 (was 0x1, writing 0xde01)
  844. radeon 0000:01:00.0: restoring config space at offset 0x4 (was 0x8, writing 0xe0000008)
  845. radeon 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
  846. radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00107)
  847. pci 0000:01:00.1: restoring config space at offset 0x5 (was 0x0, writing 0xfe9f0000)
  848. pci 0000:01:00.1: restoring config space at offset 0x4 (was 0x8, writing 0xd0000008)
  849. pci 0000:01:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x4010)
  850. pci 0000:01:00.1: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
  851. saa7134 0000:02:09.0: restoring config space at offset 0xf (was 0x20540100, writing 0x20540109)
  852. saa7134 0000:02:09.0: restoring config space at offset 0x4 (was 0x0, writing 0xfe8df800)
  853. saa7134 0000:02:09.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
  854. saa7134 0000:02:09.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106)
  855. e1000 0000:02:0c.0: restoring config space at offset 0xf (was 0xff0100, writing 0xff0109)
  856. e1000 0000:02:0c.0: restoring config space at offset 0x6 (was 0x1, writing 0xcf41)
  857. e1000 0000:02:0c.0: restoring config space at offset 0x4 (was 0x0, writing 0xfe8e0000)
  858. e1000 0000:02:0c.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010)
  859. e1000 0000:02:0c.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300117)
  860. PM: early resume of devices complete after 0.746 msecs
  861. uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  862. uhci_hcd 0000:00:1d.0: setting latency timer to 64
  863. usb usb2: root hub lost power or was reset
  864. uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  865. uhci_hcd 0000:00:1d.1: setting latency timer to 64
  866. usb usb3: root hub lost power or was reset
  867. uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  868. uhci_hcd 0000:00:1d.2: setting latency timer to 64
  869. usb usb4: root hub lost power or was reset
  870. uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  871. uhci_hcd 0000:00:1d.3: setting latency timer to 64
  872. usb usb5: root hub lost power or was reset
  873. ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
  874. ehci_hcd 0000:00:1d.7: setting latency timer to 64
  875. pci 0000:00:1e.0: setting latency timer to 64
  876. ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  877. ata_piix 0000:00:1f.1: setting latency timer to 64
  878. ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  879. ata_piix 0000:00:1f.2: setting latency timer to 64
  880. Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  881. Intel ICH 0000:00:1f.5: setting latency timer to 64
  882. radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  883. [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
  884. [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
  885. [drm] radeon: cp idle (0x10000C03)
  886. [drm] radeon: ring at 0x0000000020000000
  887. [drm] ring test succeeded in 1 usecs
  888. [drm] ib test succeeded in 0 usecs
  889. saa7133[0]: board init: gpio is 0
  890. ata2.00: configured for UDMA/33
  891. e1000 0000:02:0c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  892. pci 0000:00:1e.0: wake-up capability disabled by ACPI
  893. e1000 0000:02:0c.0: PME# disabled
  894. serial 00:08: activated
  895. parport_pc 00:09: activated
  896. sd 0:0:0:0: [sda] Starting disk
  897. psmouse serio1: ID: 10 00 64
  898. ata1.00: configured for UDMA/100
  899. ata1.01: configured for UDMA/100
  900. sd 0:0:1:0: [sdb] Starting disk
  901. usb 3-2: reset full speed USB device using uhci_hcd and address 2
  902. usb 3-2.1: reset low speed USB device using uhci_hcd and address 3
  903. PM: resume of devices complete after 5510.215 msecs
  904. PM: Finishing wakeup.
  905. Restarting tasks ... done.
  906. ADDRCONF(NETDEV_UP): eth0: link is not ready
  907. e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
  908. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  909. eth0: no IPv6 routers present
clone this paste RAW Paste Data