DAHDI Channel DID's:
--------------------

Edit Channel: 1
Description: Main Line 1
DID: 863816XXXX

Edit Channel: 2
Description: Main Line 2
DID: 863225XXXX

Edit Channel: 3
Description: Resident Line
DID: 863940XXXX


Route:
--------

Description: Main Line 1
DID Number: 863816XXXX
Set Destination: IVR / DuringHours IVR

Description: Main Line 2
DID Number: 863225XXXX
Set Destination: IVR / DuringHours IVR

Description: Resident Line
DID Number: 863940XXXX
Set Destination: Ext / 706


chan_dahdi.conf
----------------------

# Flash Operator Panel will parse this file for dahdi trunk buttons
;# AMPLABEL will be used for the display labels on the buttons

;# %c Dahdi Channel number
;# %n Line number
;# %N Line number, but restart counter
;# Example:
;# ;AMPLABEL:Channel %c - Button %n

;# For Dahdi/* buttons use the following
;# (where x=number of buttons to dislpay)
;# ;AMPWILDCARDLABEL(x):MyLabel


[channels]
language=en

; include dahdi extensions defined in FreePBX
#include chan_dahdi_additional.conf

; XTDM20B Port #1,2 plugged into PSTN
;AMPLABEL:Channel %c - Button %n
context=from-pstn
signalling=fxs_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
group=0
channel=1-3

dandi-channels.conf
--------------

; Autogenerated by /usr/sbin/dahdi_genconf on Thu May 21 17:35:48 2015
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

; Span 1: WCTDM/0 "Wildcard TDM410P" (MASTER)
;;; line="1 WCTDM/0/0 FXSKS  (In use) (EC: MG2 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
callerid=
group=
context=default

;;; line="2 WCTDM/0/1 FXSKS  (In use) (EC: MG2 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
callerid=
group=
context=default

;;; line="3 WCTDM/0/2 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 3
callerid=
group=
context=default

System.conf
---------------------

# Autogenerated by /usr/sbin/dahdi_genconf on Thu May 21 17:35:48 2015
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCTDM/0 "Wildcard TDM410P" (MASTER)
fxsks=1
echocanceller=mg2,1
fxsks=2
echocanceller=mg2,2
fxsks=3
echocanceller=mg2,3
# channel 4, WCTDM/0/3, no module.

# Global data

loadzone        = us
defaultzone     = us


dahdi_Scan
------------------

[1]
active=yes
alarms=OK
description=Wildcard TDM410P
name=WCTDM/0
manufacturer=Digium
devicetype=Wildcard TDM410P
location=PCI Bus 01 Slot 11
basechan=1
totchans=4
irq=0
type=analog
port=1,FXO
port=2,FXO
port=3,FXO
port=4,none