Don't like ads? PRO users don't see any ads ;-)
Public Pastes
Guest

Untitled

By: a guest on Mar 31st, 2010  |  syntax: None  |  size: 11.89 KB  |  hits: 58  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. Linux version 2.6.32.9 (nico@desktop-de-nico) (gcc version 4.3.3 (GCC) ) #2 Tue Mar 23 05:07:03 CET 2010
  2. CPU revision is: 00029006 (Broadcom BCM3302)
  3. ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x03, vendor 0x4243)
  4. ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x06, vendor 0x4243)
  5. ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x06, vendor 0x4243)
  6. ssb: Core 3 found: USB 1.1 Hostdev (cc 0x808, rev 0x03, vendor 0x4243)
  7. ssb: Core 4 found: PCI (cc 0x804, rev 0x08, vendor 0x4243)
  8. ssb: Core 5 found: MIPS 3302 (cc 0x816, rev 0x03, vendor 0x4243)
  9. ssb: Core 6 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
  10. ssb: Core 7 found: IPSEC (cc 0x80B, rev 0x00, vendor 0x4243)
  11. ssb: Core 8 found: MEMC SDRAM (cc 0x80F, rev 0x02, vendor 0x4243)
  12. ssb: Initializing MIPS core...
  13. ssb: set_irq: core 0x0806, irq 4 => 4
  14. ssb: set_irq: core 0x0806, irq 5 => 5
  15. ssb: after irq reconfiguration
  16. ssb: core 0x0800, irq : 2(S)  3* 4  5  6  D  I
  17. ssb: core 0x0806, irq : 2(S)  3  4* 5  6  D  I
  18. ssb: core 0x0806, irq : 2(S)  3  4  5* 6  D  I
  19. ssb: core 0x0808, irq : 2(S)* 3  4  5  6  D  I
  20. ssb: core 0x0804, irq : 2(S)  3  4  5  6* D  I
  21. ssb: core 0x0816, irq : 2(S)* 3  4  5  6  D  I
  22. ssb: core 0x0807, irq : 2(S)* 3  4  5  6  D  I
  23. ssb: core 0x080b, irq : 2(S)* 3  4  5  6  D  I
  24. ssb: core 0x080f, irq : 2(S)  3  4  5  6  D  I*
  25. ssb: Sonics Silicon Backplane found at address 0x18000000
  26. Serial init done.
  27. Determined physical RAM map:
  28.  memory: 02000000 @ 00000000 (usable)
  29. Initrd not found or empty - disabling initrd
  30. Zone PFN ranges:
  31.   Normal   0x00000000 -> 0x00002000
  32. Movable zone start PFN for each node
  33. early_node_map[1] active PFN ranges
  34.     0: 0x00000000 -> 0x00002000
  35. On node 0 totalpages: 8192
  36. free_area_init_node: node 0, pgdat 8029e7c0, node_mem_map 81000000
  37.   Normal zone: 64 pages used for memmap
  38.   Normal zone: 0 pages reserved
  39.   Normal zone: 8128 pages, LIFO batch:0
  40. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
  41. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  42. PID hash table entries: 128 (order: -3, 512 bytes)
  43. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  44. Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  45. Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
  46. Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  47. Memory: 29524k/32768k available (2321k kernel code, 3244k reserved, 358k data, 136k init, 0k highmem)
  48. Hierarchical RCU implementation.
  49. NR_IRQS:128
  50. console [ttyS0] enabled
  51. Calibrating delay loop... 263.16 BogoMIPS (lpj=526336)
  52. Mount-cache hash table entries: 512
  53. NET: Registered protocol family 16
  54. bio: create slab <bio-0> at 0
  55. Switching to clocksource MIPS
  56. ssb: PCIcore in host mode found
  57. PCI: Fixing up bridge 0000:00:00.0
  58. PCI: Setting latency timer of device 0000:00:00.0 to 64
  59. PCI: Fixing up device 0000:00:00.0
  60. PCI: Fixing latency timer of device 0000:00:00.0 to 168
  61. pci 0000:00:00.0: reg 10 32bit mmio: [0x000000-0x001fff]
  62. pci 0000:00:00.0: reg 14 32bit mmio pref: [0x000000-0x7ffffff]
  63. pci 0000:00:02.0: reg 10 32bit mmio: [0x000000-0x00ffff]
  64. pci 0000:00:03.0: reg 20 io port: [0xfce0-0xfcff]
  65. pci 0000:00:03.0: supports D1 D2
  66. pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot
  67. pci 0000:00:03.0: PME# disabled
  68. pci 0000:00:03.1: reg 20 io port: [0xfce0-0xfcff]
  69. pci 0000:00:03.1: supports D1 D2
  70. pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot
  71. pci 0000:00:03.1: PME# disabled
  72. pci 0000:00:03.2: reg 10 32bit mmio: [0x000000-0x0000ff]
  73. pci 0000:00:03.2: supports D1 D2
  74. pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot
  75. pci 0000:00:03.2: PME# disabled
  76. NET: Registered protocol family 2
  77. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  78. TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  79. TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  80. TCP: Hash tables configured (established 1024 bind 1024)
  81. TCP reno registered
  82. NET: Registered protocol family 1
  83. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  84. Registering mini_fo version $Id$
  85. JFFS2 version 2.2. (NAND) (SUMMARY)  Âc 2001-2006 Red Hat, Inc.
  86. msgmni has been set to 57
  87. io scheduler noop registered
  88. io scheduler deadline registered (default)
  89. Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
  90. serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
  91. serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
  92. serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
  93. serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
  94. flash init: 0x1c000000 0x02000000
  95. Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
  96. Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
  97. Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
  98. Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
  99.  Amd/Fujitsu Extended Query Table at 0x0040
  100. Physically mapped flash: CFI does not contain boot bank location. Assuming top.
  101. number of CFI chips: 1
  102. cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
  103. Flash device: 0x800000 at 0x1fc00000
  104. bootloader size: 262144
  105. Creating 4 MTD partitions on "Physically mapped flash":
  106. 0x000000000000-0x000000040000 : "cfe"
  107. 0x000000040000-0x0000007f0000 : "linux"
  108. 0x00000011a000-0x0000007f0000 : "rootfs"
  109. mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  110. mtd: partition "rootfs" set to be root filesystem
  111. mtd: partition "rootfs_data" created automatically, ofs=300000, len=4F0000
  112. 0x000000300000-0x0000007f0000 : "rootfs_data"
  113. 0x0000007f0000-0x000000800000 : "nvram"
  114. b44.c:v2.0
  115. eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:31:fb:2b:78
  116. b44: eth1: PHY Reset would not complete.
  117. eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 40:10:18:00:00:2d
  118. BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
  119. TCP westwood registered
  120. NET: Registered protocol family 17
  121. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  122. All bugs added by David S. Miller <davem@redhat.com>
  123. VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  124. Freeing unused kernel memory: 136k freed
  125. Please be patient, while OpenWrt loads ...
  126. diag: Detected 'ASUS WL-500g Premium'
  127. b44: eth0: Link is up at 100 Mbps, full duplex.
  128. b44: eth0: Flow control is off for TX and off for RX.
  129. roboswitch: Probing device eth0: found a 5325! It's a 5350.
  130. b44: eth0: powering down PHY
  131. b44: eth0: Link is up at 100 Mbps, full duplex.
  132. b44: eth0: Flow control is off for TX and off for RX.
  133. b44: eth0: powering down PHY
  134. b44: eth0: Link is up at 100 Mbps, full duplex.
  135. b44: eth0: Flow control is off for TX and off for RX.
  136. b44: eth0: powering down PHY
  137. mini_fo: using base directory: /
  138. mini_fo: using storage directory: /jffs
  139. b44: eth0: Link is up at 100 Mbps, full duplex.
  140. b44: eth0: Flow control is off for TX and off for RX.
  141. b44: eth0: powering down PHY
  142. b44: eth0: Link is up at 100 Mbps, full duplex.
  143. b44: eth0: Flow control is off for TX and off for RX.
  144. b44: eth0: powering down PHY
  145. b44: eth0: Link is up at 100 Mbps, full duplex.
  146. b44: eth0: Flow control is off for TX and off for RX.
  147. device eth0.0 entered promiscuous mode
  148. device eth0 entered promiscuous mode
  149. br-lan: port 1(eth0.0) entering forwarding state
  150. Generic kernel compatibility enabled based on linux-next next-20100113
  151. cfg80211: Calling CRDA to update world regulatory domain
  152. PPP generic driver version 2.4.2
  153. NET: Registered protocol family 24
  154. Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ]
  155. Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
  156. ip_tables: (C) 2000-2006 Netfilter Core Team
  157. nf_conntrack version 0.5.0 (463 buckets, 1852 max)
  158. CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  159. nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  160. sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  161. cfg80211: World regulatory domain updated:
  162.     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  163.     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  164.     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  165.     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  166.     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  167.     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  168. ath_hal: module license 'Proprietary' taints kernel.
  169. Disabling lock debugging due to kernel taint
  170. ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, XR)
  171. ath_pci: trunk
  172. wlan: trunk
  173. wlan: mac acl policy registered
  174. ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk)
  175. ath_rate_minstrel: look around rate set to 10%
  176. ath_rate_minstrel: EWMA rolloff level set to 75%
  177. ath_rate_minstrel: max segment size in the mrr set to 6000 us
  178. PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
  179. PCI: Fixing up device 0000:00:02.0
  180. Atheros HAL provided by OpenWrt, DD-WRT and MakSat Technologies
  181. Data bus error, epc == 80d2fd7c, ra == 80d014c8
  182. Oops[#1]:
  183. Cpu 0
  184. $ 0   : 00000000 1000d800 c0664000 80d30000
  185. $ 4   : 80d44000 00004000 00000003 00000003
  186. $ 8   : 55555555 00009820 99999999 81c03600
  187. $12   : ffffffff 81c03608 81c03610 00000001
  188. $16   : 00000000 000003e8 80d2fea0 80d2fd34
  189. $20   : 00000003 00000003 00004000 80d44000
  190. $24   : 00000010 80d1aee4                  
  191. $28   : 80c50000 80c51ac8 7fa3a518 80d014c8
  192. Hi    : 00000000
  193. Lo    : 000007ad
  194. epc   : 80d2fd7c 0x80d2fd7c
  195.     Tainted: P          
  196. ra    : 80d014c8 0x80d014c8
  197. Status: 1000d803    KERNEL EXL IE
  198. Cause : 0080001c
  199. PrId  : 00029006 (Broadcom BCM3302)
  200. Modules linked in: ath_pci(+) ath_hal(P) nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async b43legacy b43 mac80211 crc_ccitt pppoe pppox ppp_generic cfg80211 slhc compat_firmware_class compat arc4 aes_generic deflate ecb cbc switch_robo switch_core diag
  201. Process insmod (pid: 647, threadinfo=80c50000, task=81eb2148, tls=00000000)
  202. Stack : 00000000 80d44000 00000001 80d2fd20 00000013 80d44000 00000003 80d2fd20
  203.         80d2fd34 80c51cb4 80290000 80c825b0 80d1af88 80c51cb4 80290000 80c825b0
  204.         7fa3a518 80d1b060 80d44000 80d30000 80d44000 80d30000 80d44000 80d123d8
  205.         80d44000 80d30000 80d44000 80c51cb4 00000013 80d30000 80d12808 80d12784
  206.         802d6c7c 802d0000 802d6cbc 00000000 c0660000 80c51cb4 80c51bb8 0000000e
  207.         ...
  208. Call Trace:[<80d2fd20>] 0x80d2fd20
  209. [<80d2fd20>] 0x80d2fd20
  210. [<80d2fd34>] 0x80d2fd34
  211. [<80d1af88>] 0x80d1af88
  212. [<80d1b060>] 0x80d1b060
  213. [<80d30000>] 0x80d30000
  214. [<80d30000>] 0x80d30000
  215. [<80d123d8>] 0x80d123d8
  216. [<80d30000>] 0x80d30000
  217. [<80d30000>] 0x80d30000
  218. [<80d12808>] 0x80d12808
  219. [<80d12784>] 0x80d12784
  220. [<801646c4>] 0x801646c4
  221. [<8002505c>] 0x8002505c
  222. [<80025014>] 0x80025014
  223. [<800df5c0>] 0x800df5c0
  224. [<800df0d0>] 0x800df0d0
  225. [<80d0167c>] 0x80d0167c
  226. [<80d2ffc0>] 0x80d2ffc0
  227. [<80d91734>] 0x80d91734
  228. [<800570c4>] 0x800570c4
  229. [<801aaeb4>] 0x801aaeb4
  230. [<80018604>] 0x80018604
  231. [<80d8cc0c>] 0x80d8cc0c
  232. [<8005731c>] 0x8005731c
  233. [<80d9b8ec>] 0x80d9b8ec
  234. [<8012f6c8>] 0x8012f6c8
  235. [<8016865c>] 0x8016865c
  236. [<8014a474>] 0x8014a474
  237. [<8016c014>] 0x8016c014
  238. [<8016c208>] 0x8016c208
  239. [<800e7590>] 0x800e7590
  240. [<8012f6c8>] 0x8012f6c8
  241. [<8016c358>] 0x8016c358
  242. [<8016c3c4>] 0x8016c3c4
  243. [<8012fdb8>] 0x8012fdb8
  244. [<8016b8c0>] 0x8016b8c0
  245. [<8012fe48>] 0x8012fe48
  246. [<8016b010>] 0x8016b010
  247. [<80dce000>] 0x80dce000
  248. [<8016c774>] 0x8016c774
  249. [<80dce000>] 0x80dce000
  250. [<80dce000>] 0x80dce000
  251. [<8014a704>] 0x8014a704
  252. [<80d9c918>] 0x80d9c918
  253. [<80dce284>] 0x80dce284
  254. [<80dce058>] 0x80dce058
  255. [<8000d5c8>] 0x8000d5c8
  256. [<80043290>] 0x80043290
  257. [<80055a44>] 0x80055a44
  258. [<80092630>] 0x80092630
  259. [<80003230>] 0x80003230
  260.  
  261.  
  262. Code: 00000000  8c820014  00451021 <8c420000> 03e00008  00000000  3c038029  8c642390  3c021062
create a new version of this paste RAW Paste Data