Don't like ads? PRO users don't see any ads ;-)
Public Pastes
Guest

Untitled

By: a guest on Jul 29th, 2012  |  syntax: None  |  size: 15.37 KB  |  hits: 13  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. nd
  2. ps3nflash sb_01: ps3nflasha (16 MiB total, 16 MiB region)
  3.  ps3nflasha: unknown partition table
  4. ps3nflash sb_01: ps3nflashb (16 MiB total, 14 MiB region)
  5.  ps3nflashb: unknown partition table
  6. ps3nflash sb_01: ps3nflashc (16 MiB total, 0 MiB region)
  7.  ps3nflashc: unknown partition table
  8. ps3nflash sb_01: ps3nflashd (16 MiB total, 0 MiB region)
  9.  ps3nflashd: unknown partition table
  10. ps3vflash_init:434: registered block device major 252
  11. ps3_system_bus_match:364: dev=12.0(sb_04), drv=12.0(ps3vflash): match
  12. irq: irq 18 on host null mapped to virtual irq 29
  13. ps3vflash sb_04: ps3stor_probe_access:127: 6 accessible regions found
  14. ps3vflash sb_04: ps3vflasha (41216 MiB total, 41216 MiB region)
  15.  ps3vflasha: unknown partition table
  16. ps3vflash sb_04: ps3vflashc (41216 MiB total, 199 MiB region)
  17.  ps3vflashc:
  18. ps3vflash sb_04: ps3vflashd (41216 MiB total, 16 MiB region)
  19.  ps3vflashd:
  20. ps3vflash sb_04: ps3vflashe (41216 MiB total, 0 MiB region)
  21.  ps3vflashe:
  22. ps3vflash sb_04: ps3vflashf (41216 MiB total, 24 MiB region)
  23.  ps3vflashf: unknown partition table
  24. ps3vflash sb_04: ps3vflashg (41216 MiB total, 0 MiB region)
  25.  ps3vflashg: unknown partition table
  26. brd: module loaded
  27. loop: module loaded
  28. ps3_system_bus_match:364: dev=7.0(sb_02), drv=7.0(ps3rom): match
  29. irq: irq 19 on host null mapped to virtual irq 30
  30. scsi0 : ps3rom
  31. scsi 0:0:0:0: CD-ROM            SONY     PS-SYSTEM   306R 6230 PQ: 0 ANSI: 0
  32. Driver 'sd' needs updating - please use bus_type methods
  33. Driver 'sr' needs updating - please use bus_type methods
  34. sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
  35. Uniform CD-ROM driver Revision: 3.20
  36. sr 0:0:0:0: Attached scsi CD-ROM sr0
  37. ps3_system_bus_match:364: dev=3.0(sb_05), drv=3.0(ps3_gelic_driver): match
  38. dma_sb_region_create_linear:988: forcing 16M pages for linear map
  39. ps3_gelic_driver sb_05: internal vlan disabled
  40. irq: irq 20 on host null mapped to virtual irq 31
  41. ps3_gelic_driver sb_05: eth0: MAC addr 00:24:8d:df:c9:30
  42. mice: PS/2 mouse device common for all mice
  43. ps3_system_bus_match:364: dev=5.0(vuart_02), drv=5.0(ps3_sys_manager): match
  44. TCP westwood registered
  45. NET: Registered protocol family 17
  46. RPC: Registered udp transport module.
  47. RPC: Registered tcp transport module.
  48. Freeing unused kernel memory: 4376k freed
  49. usbcore: registered new interface driver usbfs
  50. usbcore: registered new interface driver hub
  51. usbcore: registered new device driver usb
  52. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  53. ps3_system_bus_match:364: dev=1.0(sb_06), drv=1.0(ps3-ehci-driver): match
  54. dma_sb_region_create_linear:988: forcing 16M pages for linear map
  55. irq: irq 21 on host null mapped to virtual irq 32
  56. ps3-ehci-driver sb_06: PS3 EHCI Host Controller
  57. ps3-ehci-driver sb_06: new USB bus registered, assigned bus number 1
  58. ps3-ehci-driver sb_06: irq 32, io mem 0x400000060000
  59. ps3-ehci-driver sb_06: USB 0.0 started, EHCI 1.00
  60. usb usb1: configuration #1 chosen from 1 choice
  61. hub 1-0:1.0: USB hub found
  62. hub 1-0:1.0: 2 ports detected
  63. ps3_system_bus_match:364: dev=1.0(sb_08), drv=1.0(ps3-ehci-driver): match
  64. dma_sb_region_create_linear:988: forcing 16M pages for linear map
  65. irq: irq 22 on host null mapped to virtual irq 33
  66. ps3-ehci-driver sb_08: PS3 EHCI Host Controller
  67. ps3-ehci-driver sb_08: new USB bus registered, assigned bus number 2
  68. ps3-ehci-driver sb_08: irq 33, io mem 0x400000070000
  69. ps3-ehci-driver sb_08: USB 0.0 started, EHCI 1.00
  70. usb usb2: configuration #1 chosen from 1 choice
  71. hub 2-0:1.0: USB hub found
  72. hub 2-0:1.0: 2 ports detected
  73. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  74. ps3_system_bus_match:364: dev=2.0(sb_07), drv=2.0(ps3-ohci-driver): match
  75. dma_sb_region_create_linear:988: forcing 16M pages for linear map
  76. irq: irq 23 on host null mapped to virtual irq 34
  77. ps3-ohci-driver sb_07: PS3 OHCI Host Controller
  78. ps3-ohci-driver sb_07: new USB bus registered, assigned bus number 3
  79. ps3-ohci-driver sb_07: irq 34, io mem 0x400000080000
  80. usb usb3: configuration #1 chosen from 1 choice
  81. hub 3-0:1.0: USB hub found
  82. hub 3-0:1.0: 2 ports detected
  83. ps3_system_bus_match:364: dev=2.0(sb_09), drv=2.0(ps3-ohci-driver): match
  84. dma_sb_region_create_linear:988: forcing 16M pages for linear map
  85. irq: irq 24 on host null mapped to virtual irq 35
  86. ps3-ohci-driver sb_09: PS3 OHCI Host Controller
  87. ps3-ohci-driver sb_09: new USB bus registered, assigned bus number 4
  88. ps3-ohci-driver sb_09: irq 35, io mem 0x400000090000
  89. usb usb4: configuration #1 chosen from 1 choice
  90. hub 4-0:1.0: USB hub found
  91. hub 4-0:1.0: 2 ports detected
  92. Initializing USB Mass Storage driver...
  93. usbcore: registered new interface driver usb-storage
  94. USB Mass Storage support registered.
  95. usbcore: registered new interface driver ums-alauda
  96. usbcore: registered new interface driver ums-cypress
  97. usbcore: registered new interface driver ums-datafab
  98. usbcore: registered new interface driver ums-freecom
  99. usbcore: registered new interface driver ums-isd200
  100. usbcore: registered new interface driver ums-jumpshot
  101. usbcore: registered new interface driver ums-karma
  102. usbcore: registered new interface driver ums-sddr09
  103. usbcore: registered new interface driver ums-sddr55
  104. usbcore: registered new interface driver ums-usbat
  105. sr 0:0:0:0: Attached scsi generic sg0 type 5
  106. usb 1-1: new high speed USB device using ps3-ehci-driver and address 2
  107. usbcore: registered new interface driver hiddev
  108. usbcore: registered new interface driver usbhid
  109. usbhid: v2.6:USB HID core driver
  110. usb 1-1: configuration #1 chosen from 1 choice
  111. scsi1 : SCSI emulation for USB Mass Storage devices
  112. usb-storage: device found at 2
  113. usb-storage: waiting for device to settle before scanning
  114. usb 2-2: new high speed USB device using ps3-ehci-driver and address 2
  115. FAT: bogus number of reserved sectors
  116. VFS: Can't find a valid FAT filesystem on dev ps3nflasha.
  117. usb 2-2: configuration #1 chosen from 1 choice
  118. bio too big device loop2 (1 > 0)
  119. FAT: unable to read boot sector
  120. bio too big device loop1 (1 > 0)
  121. FAT: unable to read boot sector
  122. FAT: bogus number of reserved sectors
  123. VFS: Can't find a valid FAT filesystem on dev ps3da.
  124. FAT: invalid media value (0xa2)
  125. VFS: Can't find a valid FAT filesystem on dev ps3vflashg.
  126. usb 3-2: new full speed USB device using ps3-ohci-driver and address 2
  127. FAT: invalid media value (0x8b)
  128. VFS: Can't find a valid FAT filesystem on dev ps3db.
  129. bio too big device loop3 (1 > 0)
  130. FAT: unable to read boot sector
  131. bio too big device loop0 (1 > 0)
  132. FAT: unable to read boot sector
  133. FAT: invalid media value (0x90)
  134. VFS: Can't find a valid FAT filesystem on dev ps3nflashb.
  135. FAT: bogus number of reserved sectors
  136. VFS: Can't find a valid FAT filesystem on dev ps3vflasha.
  137. FAT: bogus number of FAT structure
  138. VFS: Can't find a valid FAT filesystem on dev ps3vflashf.
  139. FAT: bogus number of FAT structure
  140. VFS: Can't find a valid FAT filesystem on dev ps3nflashc.
  141. FAT: bogus number of reserved sectors
  142. VFS: Can't find a valid FAT filesystem on dev ram8.
  143. usb 3-2: configuration #1 chosen from 1 choice
  144. hub 3-2:1.0: USB hub found
  145. hub 3-2:1.0: 3 ports detected
  146. FAT: invalid media value (0x25)
  147. VFS: Can't find a valid FAT filesystem on dev ps3nflashd.
  148. FAT: bogus number of reserved sectors
  149. VFS: Can't find a valid FAT filesystem on dev ram0.
  150. bio too big device loop5 (1 > 0)
  151. FAT: unable to read boot sector
  152. FAT: bogus number of reserved sectors
  153. VFS: Can't find a valid FAT filesystem on dev ram12.
  154. FAT: bogus number of reserved sectors
  155. VFS: Can't find a valid FAT filesystem on dev ram5.
  156. FAT: bogus number of reserved sectors
  157. VFS: Can't find a valid FAT filesystem on dev ram7.
  158. FAT: bogus number of reserved sectors
  159. VFS: Can't find a valid FAT filesystem on dev ram11.
  160. FAT: bogus number of reserved sectors
  161. VFS: Can't find a valid FAT filesystem on dev ram15.
  162. FAT: bogus number of reserved sectors
  163. VFS: Can't find a valid FAT filesystem on dev ram10.
  164. FAT: bogus number of reserved sectors
  165. VFS: Can't find a valid FAT filesystem on dev ram2.
  166. bio too big device loop7 (1 > 0)
  167. FAT: unable to read boot sector
  168. FAT: bogus number of reserved sectors
  169. VFS: Can't find a valid FAT filesystem on dev ram9.
  170. bio too big device loop6 (1 > 0)
  171. FAT: unable to read boot sector
  172. FAT: bogus number of reserved sectors
  173. VFS: Can't find a valid FAT filesystem on dev ram6.
  174. FAT: bogus number of reserved sectors
  175. VFS: Can't find a valid FAT filesystem on dev ram1.
  176. FAT: bogus number of reserved sectors
  177. VFS: Can't find a valid FAT filesystem on dev ram3.
  178. FAT: bogus number of reserved sectors
  179. VFS: Can't find a valid FAT filesystem on dev ram13.
  180. FAT: bogus number of reserved sectors
  181. VFS: Can't find a valid FAT filesystem on dev ram14.
  182. bio too big device loop4 (1 > 0)
  183. FAT: unable to read boot sector
  184. FAT: bogus number of reserved sectors
  185. VFS: Can't find a valid FAT filesystem on dev ram4.
  186. usb 3-2.1: new low speed USB device using ps3-ohci-driver and address 3
  187. usb 3-2.1: configuration #1 chosen from 1 choice
  188. input: Logitech Optical USB Mouse as /devices/ps3_system/sb_07/usb3/3-2/3-2.1/3-2.1:1.0/input/input0
  189. generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-sb_07-2.1/input0
  190. usb 3-2.3: new full speed USB device using ps3-ohci-driver and address 4
  191. usb 3-2.3: configuration #1 chosen from 1 choice
  192. input: Mitsumi Electric Apple Extended USB Keyboard as /devices/ps3_system/sb_07/usb3/3-2/3-2.3/3-2.3:1.0/input/input1
  193. generic-usb 0003:05AC:020B.0002: input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-sb_07-2.3/input0
  194. input: Mitsumi Electric Apple Extended USB Keyboard as /devices/ps3_system/sb_07/usb3/3-2/3-2.3/3-2.3:1.1/input/input2
  195. generic-usb 0003:05AC:020B.0003: input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-sb_07-2.3/input1
  196. ps3av_do_pkt: ps3av_send_cmd_pkt() failed (result=-11)
  197. ps3av_do_pkt: failed cid:10003 res:-11
  198. scsi 1:0:0:0: Direct-Access     SanDisk  SanDisk Cruzer   8.02 PQ: 0 ANSI: 0 CCS
  199. sd 1:0:0:0: Attached scsi generic sg1 type 0
  200. scsi 1:0:0:1: CD-ROM            SanDisk  SanDisk Cruzer   8.02 PQ: 0 ANSI: 0
  201. sd 1:0:0:0: [sda] 15695871 512-byte hardware sectors: (8.03 GB/7.48 GiB)
  202. sd 1:0:0:0: [sda] Write Protect is off
  203. sd 1:0:0:0: [sda] Mode Sense: 45 00 00 08
  204. sd 1:0:0:0: [sda] Assuming drive cache: write through
  205. sr1: scsi3-mmc drive: 48x/48x tray
  206. sr 1:0:0:1: Attached scsi CD-ROM sr1
  207. sr 1:0:0:1: Attached scsi generic sg2 type 5
  208. usb-storage: device scan complete
  209. sd 1:0:0:0: [sda] Assuming drive cache: write through
  210.  sda: sda1 sda2 sda3
  211. sd 1:0:0:0: [sda] Attached SCSI removable disk
  212. FAT: invalid media value (0x00)
  213. VFS: Can't find a valid FAT filesystem on dev sda.
  214. FAT: bogus number of reserved sectors
  215. VFS: Can't find a valid FAT filesystem on dev sda2.
  216. sr 1:0:0:1: [sr1] Unhandled sense code
  217. sr 1:0:0:1: [sr1] Result: hostbyte=0x07 driverbyte=0x08
  218. sr 1:0:0:1: [sr1] Sense Key : 0x0 [current]
  219. sr 1:0:0:1: [sr1] ASC=0x0 ASCQ=0x0
  220. end_request: I/O error, dev sr1, sector 196352
  221. Buffer I/O error on device sr1, logical block 49088
  222. Buffer I/O error on device sr1, logical block 49089
  223. sr 1:0:0:1: [sr1] Unhandled sense code
  224. sr 1:0:0:1: [sr1] Result: hostbyte=0x07 driverbyte=0x08
  225. sr 1:0:0:1: [sr1] Sense Key : 0x0 [current]
  226. sr 1:0:0:1: [sr1] ASC=0x0 ASCQ=0x0
  227. end_request: I/O error, dev sr1, sector 196352
  228. Buffer I/O error on device sr1, logical block 49088
  229. Buffer I/O error on device sr1, logical block 49089
  230. ISO 9660 Extensions: Microsoft Joliet Level 3
  231. ISOFS: changing to secondary root
  232. usb 1-1: USB disconnect, address 2
  233. scsi 1:0:0:1: rejecting I/O to dead device
  234. usb 1-1: new high speed USB device using ps3-ehci-driver and address 4
  235. usb 1-1: configuration #1 chosen from 1 choice
  236. scsi2 : SCSI emulation for USB Mass Storage devices
  237. usb-storage: device found at 4
  238. usb-storage: waiting for device to settle before scanning
  239. scsi 2:0:0:0: Direct-Access     SanDisk  SanDisk Cruzer   8.02 PQ: 0 ANSI: 0 CCS
  240. sd 2:0:0:0: Attached scsi generic sg1 type 0
  241. scsi 2:0:0:1: CD-ROM            SanDisk  SanDisk Cruzer   8.02 PQ: 0 ANSI: 0
  242. sd 2:0:0:0: [sdb] 15695871 512-byte hardware sectors: (8.03 GB/7.48 GiB)
  243. sd 2:0:0:0: [sdb] Write Protect is off
  244. sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
  245. sd 2:0:0:0: [sdb] Assuming drive cache: write through
  246. sr1: scsi3-mmc drive: 48x/48x tray
  247. sr 2:0:0:1: Attached scsi CD-ROM sr1
  248. sr 2:0:0:1: Attached scsi generic sg2 type 5
  249. usb-storage: device scan complete
  250. sd 2:0:0:0: [sdb] Assuming drive cache: write through
  251.  sdb: sdb1 sdb2 sdb3
  252. sd 2:0:0:0: [sdb] Attached SCSI removable disk
  253. sr 2:0:0:1: [sr1] Unhandled sense code
  254. sr 2:0:0:1: [sr1] Result: hostbyte=0x07 driverbyte=0x08
  255. sr 2:0:0:1: [sr1] Sense Key : 0x0 [current]
  256. sr 2:0:0:1: [sr1] ASC=0x0 ASCQ=0x0
  257. end_request: I/O error, dev sr1, sector 196352
  258. Buffer I/O error on device sr1, logical block 49088
  259. Buffer I/O error on device sr1, logical block 49089
  260. sr 2:0:0:1: [sr1] Unhandled sense code
  261. sr 2:0:0:1: [sr1] Result: hostbyte=0x07 driverbyte=0x08
  262. sr 2:0:0:1: [sr1] Sense Key : 0x0 [current]
  263. sr 2:0:0:1: [sr1] ASC=0x0 ASCQ=0x0
  264. end_request: I/O error, dev sr1, sector 196352
  265. Buffer I/O error on device sr1, logical block 49088
  266. Buffer I/O error on device sr1, logical block 49089
  267. ISO 9660 Extensions: Microsoft Joliet Level 3
  268. ISOFS: changing to secondary root
  269. FAT: invalid media value (0x00)
  270. VFS: Can't find a valid FAT filesystem on dev sdb.
  271. FAT: bogus number of reserved sectors
  272. VFS: Can't find a valid FAT filesystem on dev sdb2.
  273. FAT: Directory bread(block 24576) failed
  274. FAT: Directory bread(block 24577) failed
  275. FAT: Directory bread(block 24578) failed
  276. FAT: Directory bread(block 24579) failed
  277. FAT: Directory bread(block 24580) failed
  278. FAT: Directory bread(block 24581) failed
  279. FAT: Directory bread(block 24582) failed
  280. FAT: Directory bread(block 24583) failed
  281. usb 1-1: USB disconnect, address 4
  282. scsi 2:0:0:1: rejecting I/O to dead device
  283. usb 1-1: new high speed USB device using ps3-ehci-driver and address 5
  284. usb 1-1: configuration #1 chosen from 1 choice
  285. scsi3 : SCSI emulation for USB Mass Storage devices
  286. usb-storage: device found at 5
  287. usb-storage: waiting for device to settle before scanning
  288. scsi 3:0:0:0: Direct-Access     SanDisk  SanDisk Cruzer   8.02 PQ: 0 ANSI: 0 CCS
  289. sd 3:0:0:0: Attached scsi generic sg1 type 0
  290. scsi 3:0:0:1: CD-ROM            SanDisk  SanDisk Cruzer   8.02 PQ: 0 ANSI: 0
  291. sd 3:0:0:0: [sdc] 15695871 512-byte hardware sectors: (8.03 GB/7.48 GiB)
  292. sd 3:0:0:0: [sdc] Write Protect is off
  293. sd 3:0:0:0: [sdc] Mode Sense: 45 00 00 08
  294. sd 3:0:0:0: [sdc] Assuming drive cache: write through
  295. sr1: scsi3-mmc drive: 48x/48x tray
  296. sr 3:0:0:1: Attached scsi CD-ROM sr1
  297. sr 3:0:0:1: Attached scsi generic sg2 type 5
  298. usb-storage: device scan complete
  299. sd 3:0:0:0: [sdc] Assuming drive cache: write through
  300.  sdc: sdc1 sdc2 sdc3
  301. sd 3:0:0:0: [sdc] Attached SCSI removable disk
  302. FAT: invalid media value (0x00)
  303. VFS: Can't find a valid FAT filesystem on dev sdc.
  304. sr 3:0:0:1: [sr1] Unhandled sense code
  305. sr 3:0:0:1: [sr1] Result: hostbyte=0x07 driverbyte=0x08
  306. sr 3:0:0:1: [sr1] Sense Key : 0x0 [current]
  307. sr 3:0:0:1: [sr1] ASC=0x0 ASCQ=0x0
  308. end_request: I/O error, dev sr1, sector 196352
  309. Buffer I/O error on device sr1, logical block 49088
  310. Buffer I/O error on device sr1, logical block 49089
  311. sr 3:0:0:1: [sr1] Unhandled sense code
  312. sr 3:0:0:1: [sr1] Result: hostbyte=0x07 driverbyte=0x08
  313. sr 3:0:0:1: [sr1] Sense Key : 0x0 [current]
  314. sr 3:0:0:1: [sr1] ASC=0x0 ASCQ=0x0
  315. end_request: I/O error, dev sr1, sector 196352
  316. Buffer I/O error on device sr1, logical block 49088
  317. Buffer I/O error on device sr1, logical block 49089
  318. ISO 9660 Extensions: Microsoft Joliet Level 3
  319. ISOFS: changing to secondary root
  320. FAT: bogus number of reserved sectors
  321. VFS: Can't find a valid FAT filesystem on dev sdc2.
create a new version of this paste RAW Paste Data