Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.12.28+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #709 PRE
- EMPT Mon Sep 8 15:28:00 BST 2014
- [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- [ 0.000000] Machine: BCM2708
- [ 0.000000] cma: CMA: reserved 8 MiB at 1b800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
- [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=512 bcm2708.boardrev=0x10 bcm2708.serial=0x5738454a smsc95xx.macaddr=
- B8:27:EB:38:45:4A bcm2708.disk_led_gpio=47 bcm2708.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000
- dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 439532K/458752K available (4498K kernel code, 242K rwdata, 1344K rodata, 143K init, 701K bss, 19220K reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xdc800000 - 0xff000000 ( 552 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
- [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc05bca24 (5843 kB)
- [ 0.000000] .init : 0xc05bd000 - 0xc05e0eac ( 144 kB)
- [ 0.000000] .data : 0xc05e2000 - 0xc061e8a0 ( 243 kB)
- [ 0.000000] .bss : 0xc061e8ac - 0xc06ce080 ( 702 kB)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:394
- [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.001186] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
- [ 0.001246] pid_max: default: 32768 minimum: 301
- [ 0.001770] Mount-cache hash table entries: 512
- [ 0.002591] Initializing cgroup subsys memory
- [ 0.002703] Initializing cgroup subsys devices
- [ 0.002742] Initializing cgroup subsys freezer
- [ 0.002773] Initializing cgroup subsys blkio
- [ 0.002920] CPU: Testing write buffer coherency: ok
- [ 0.003386] Setting up static identity map for 0xc04487f8 - 0xc0448854
- [ 0.005325] devtmpfs: initialized
- [ 0.021309] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
- [ 0.022891] NET: Registered protocol family 16
- [ 0.028249] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.028950] cpuidle: using governor ladder
- [ 0.028998] cpuidle: using governor menu
- [ 0.029415] bcm2708.uart_clock = 0
- [ 0.031506] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
- [ 0.031568] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.031603] mailbox: Broadcom VideoCore Mailbox driver
- [ 0.031700] bcm2708_vcio: mailbox at f200b880
- [ 0.031805] bcm_power: Broadcom power driver
- [ 0.031842] bcm_power_open() -> 0
- [ 0.031866] bcm_power_request(0, 8)
- [ 0.532592] bcm_mailbox_read -> 00000080, 0
- [ 0.532634] bcm_power_request -> 0
- [ 0.532897] Serial: AMBA PL011 UART driver
- [ 0.533075] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
- [ 0.896429] console [ttyAMA0] enabled
- [ 0.923619] bio: create slab <bio-0> at 0
- [ 0.929161] SCSI subsystem initialized
- [ 0.933162] usbcore: registered new interface driver usbfs
- [ 0.938865] usbcore: registered new interface driver hub
- [ 0.944422] usbcore: registered new device driver usb
- [ 0.951002] Switched to clocksource stc
- [ 0.955272] FS-Cache: Loaded
- [ 0.958462] CacheFiles: Loaded
- [ 0.974374] NET: Registered protocol family 2
- [ 0.980183] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.987597] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.994189] TCP: Hash tables configured (established 4096 bind 4096)
- [ 1.000636] TCP: reno registered
- [ 1.003932] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 1.009803] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 1.016575] NET: Registered protocol family 1
- [ 1.021564] RPC: Registered named UNIX socket transport module.
- [ 1.027525] RPC: Registered udp transport module.
- [ 1.032333] RPC: Registered tcp transport module.
- [ 1.037054] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.044394] bcm2708_dma: DMA manager at f2007000
- [ 1.049137] bcm2708_gpio: bcm2708_gpio_probe c05efef0
- [ 1.054702] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
- [ 1.064325] audit: initializing netlink socket (disabled)
- [ 1.069836] type=2000 audit(0.910:1): initialized
- [ 1.240189] VFS: Disk quotas dquot_6.5.2
- [ 1.244552] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 1.253520] FS-Cache: Netfs 'nfs' registered for caching
- [ 1.260471] NFS: Registering the id_resolver key type
- [ 1.265764] Key type id_resolver registered
- [ 1.269972] Key type id_legacy registered
- [ 1.274782] msgmni has been set to 874
- [ 1.280527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 1.288390] io scheduler noop registered
- [ 1.292470] io scheduler deadline registered (default)
- [ 1.297949] io scheduler cfq registered
- [ 1.303160] BCM2708FB: allocated DMA memory 5bc00000
- [ 1.308204] BCM2708FB: allocated DMA channel 0 @ f2007000
- [ 1.316191] bcm2708_fb_pan_display(0,0) returns=0
- [ 1.318997] Console: switching to colour frame buffer device 82x32
- [ 1.319577] bcm2708_fb_pan_display(0,0) returns=0
- [ 1.340670] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
- [ 1.350155] uart-pl011 dev:f1: no DMA platform data
- [ 1.357545] vc-cma: Videocore CMA driver
- [ 1.363353] vc-cma: vc_cma_base = 0x00000000
- [ 1.369761] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
- [ 1.376942] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
- [ 1.393666] brd: module loaded
- [ 1.403781] loop: module loaded
- [ 1.408852] vchiq: vchiq_init_state: slot_zero = 0xdb800000, is_master = 0
- [ 1.418517] Loading iSCSI transport class v2.0-870.
- [ 1.426443] usbcore: registered new interface driver smsc95xx
- [ 1.434434] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 1.642270] Core Release: 2.80a
- [ 1.647059] Setting default values for core params
- [ 1.653549] Finished setting default values for core params
- [ 1.861007] Using Buffer DMA mode
- [ 1.865992] Periodic Transfer Interrupt Enhancement - disabled
- [ 1.873486] Multiprocessor Interrupt Enhancement - disabled
- [ 1.880658] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 1.886625] Dedicated Tx FIFOs mode
- [ 1.892083] WARN::dwc_otg_hcd_init:1042: FIQ DMA bounce buffers: virt = 0xdbc14000 dma = 0x5bc14000 len=9024
- [ 1.905305] FIQ FSM acceleration enabled for :
- [ 1.905305] Non-periodic Split Transactions
- [ 1.905305] Periodic Split Transactions
- [ 1.905305] High-Speed Isochronous Endpoints
- [ 1.928725] WARN::hcd_init:473: FIQ at 0xc0321550
- [ 1.935112] WARN::hcd_init:474: FIQ ASM at 0xc0321800 length 36
- [ 1.942672] WARN::hcd_init:500: MPHI regs_base at 0xdc806000
- [ 1.949913] dwc_otg bcm2708_usb: DWC OTG Controller
- [ 1.956450] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
- [ 1.965447] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
- [ 1.972701] Init: Port Power? op_state=1
- [ 1.978282] Init: Power Port (0)
- [ 1.983521] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.992064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.000956] usb usb1: Product: DWC OTG Controller
- [ 2.007329] usb usb1: Manufacturer: Linux 3.12.28+ dwc_otg_hcd
- [ 2.014853] usb usb1: SerialNumber: bcm2708_usb
- [ 2.021899] hub 1-0:1.0: USB hub found
- [ 2.027400] hub 1-0:1.0: 1 port detected
- [ 2.034025] usbcore: registered new interface driver usb-storage
- [ 2.042186] mousedev: PS/2 mouse device common for all mice
- [ 2.050081] bcm2835-cpufreq: min=700000 max=700000 cur=700000
- [ 2.057690] bcm2835-cpufreq: switching to governor powersave
- [ 2.065077] bcm2835-cpufreq: switching to governor powersave
- [ 2.072489] sdhci: Secure Digital Host Controller Interface driver
- [ 2.080238] sdhci: Copyright(c) Pierre Ossman
- [ 2.086228] sdhci: Enable low-latency mode
- [ 2.131200] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
- [ 2.142350] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
- [ 2.149988] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 2.157518] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.167522] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.182270] usbcore: registered new interface driver usbhid
- [ 2.189653] usbhid: USB HID core driver
- [ 2.199871] TCP: cubic registered
- [ 2.207002] Initializing XFRM netlink socket
- [ 2.215096] NET: Registered protocol family 17
- [ 2.221502] Key type dns_resolver registered
- [ 2.231245] Indeed it is in host mode hprt0 = 00021501
- [ 2.245127] registered taskstats version 1
- [ 2.261955] Waiting for root device /dev/mmcblk0p2...
- [ 2.333176] mmc0: read SD Status register (SSR) after 4 attempts
- [ 2.349129] mmc0: new high speed SDHC card at address b368
- [ 2.357126] mmcblk0: mmc0:b368 14.9 GiB
- [ 2.365314] mmcblk0: p1 p2
- [ 2.461185] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 2.469611] Indeed it is in host mode hprt0 = 00001101
- [ 2.671468] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 2.679992] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.689889] hub 1-1:1.0: USB hub found
- [ 2.695669] hub 1-1:1.0: 5 ports detected
- [ 2.801114] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 2.808627] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 2.816020] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 2.851040] hub 1-1:1.0: hub_port_status failed (err = -71)
- [ 2.858247] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 2.865566] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 2.872840] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 2.901041] hub 1-1:1.0: hub_port_status failed (err = -71)
- [ 2.908137] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 2.915339] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 2.922512] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 2.941232] usb 1-1: USB disconnect, device number 2
- [ 2.962119] hub 1-1:1.0: hub_port_status failed (err = -71)
- [ 2.969188] hub 1-1:1.0: activate --> -19
- [ 3.131141] Indeed it is in host mode hprt0 = 00021501
- [ 3.311166] usb 1-1: new high-speed USB device number 3 using dwc_otg
- [ 3.319335] Indeed it is in host mode hprt0 = 00001101
- [ 3.521471] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 3.529744] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.539315] hub 1-1:1.0: USB hub found
- [ 3.544800] hub 1-1:1.0: 5 ports detected
- [ 3.651108] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 3.658330] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 3.665445] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 3.691238] usb 1-1: USB disconnect, device number 3
- [ 3.701078] hub 1-1:1.0: hub_port_status failed (err = -71)
- [ 3.708034] hub 1-1:1.0: activate --> -19
- [ 3.891169] Indeed it is in host mode hprt0 = 00021501
- [ 4.071154] usb 1-1: new high-speed USB device number 4 using dwc_otg
- [ 4.079316] Indeed it is in host mode hprt0 = 00001101
- [ 4.281434] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 4.289720] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.299377] hub 1-1:1.0: USB hub found
- [ 4.304949] hub 1-1:1.0: 5 ports detected
- [ 4.411139] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 4.418466] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 4.425735] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 4.433068] hub 1-1:1.0: hub_port_status failed (err = -71)
- [ 4.440238] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 4.447509] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 4.454746] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 4.462146] usb 1-1: USB disconnect, device number 4
- [ 4.468764] hub 1-1:1.0: hub_port_status failed (err = -71)
- [ 4.475875] hub 1-1:1.0: activate --> -19
- [ 4.641145] Indeed it is in host mode hprt0 = 00021501
- [ 4.821156] usb 1-1: new high-speed USB device number 5 using dwc_otg
- [ 4.829261] Indeed it is in host mode hprt0 = 00001101
- [ 5.031414] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 5.039700] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 5.049309] hub 1-1:1.0: USB hub found
- [ 5.054888] hub 1-1:1.0: 5 ports detected
- [ 5.161125] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 5.168434] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 5.175684] NYET/NAK/ACK/other in non-error case, 0x00000002
- [ 5.191252] usb 1-1: USB disconnect, device number 5
- [ 5.197890] hub 1-1:1.0: hub_port_status failed (err = -71)
- [ 5.211053] hub 1-1:1.0: activate --> -19
- [ 5.371177] Indeed it is in host mode hprt0 = 00021501
- [ 5.551145] usb 1-1: new high-speed USB device number 6 using dwc_otg
- [ 5.559233] Indeed it is in host mode hprt0 = 00001101
- [ 5.761415] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 5.769711] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 5.779384] hub 1-1:1.0: USB hub found
- [ 5.784956] hub 1-1:1.0: 5 ports detected
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0x0
- ...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement