Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.35-32-generic (buildd@palmer) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #64-Ubuntu SMP Mon Jan 2 23:31:33 UTC 2012 (Ubuntu 2.6.35-32.64-generic 2.6.35.14)
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f5d0000 (usable)
- [ 0.000000] BIOS-e820: 000000007f5d0000 - 000000007f5e0000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000007f5e3000 - 0000000080000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
- [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
- [ 0.000000] DMI present.
- [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] last_pfn = 0x7f5d0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-DFFFF uncachable
- [ 0.000000] E0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask 080000000 write-back
- [ 0.000000] 1 base 07F600000 mask 0FFE00000 uncachable
- [ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] Scanning 0 areas for low memory corruption
- [ 0.000000] modified physical RAM map:
- [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
- [ 0.000000] modified: 0000000000010000 - 000000000009dc00 (usable)
- [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved)
- [ 0.000000] modified: 00000000000dc000 - 00000000000e0000 (reserved)
- [ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved)
- [ 0.000000] modified: 0000000000100000 - 000000007f5d0000 (usable)
- [ 0.000000] modified: 000000007f5d0000 - 000000007f5e0000 (ACPI data)
- [ 0.000000] modified: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
- [ 0.000000] modified: 000000007f5e3000 - 0000000080000000 (reserved)
- [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
- [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] initial memory mapped : 0 - 00c00000
- [ 0.000000] found SMP MP-table at [c00f7f80] f7f80
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
- [ 0.000000] RAMDISK: 370b1000 - 37ff0000
- [ 0.000000] Allocated new RAMDISK: 009ac000 - 018ea6ae
- [ 0.000000] Move RAMDISK from 00000000370b1000 - 0000000037fef6ad to 009ac000 - 018ea6ad
- [ 0.000000] ACPI: RSDP 000f7f50 00024 (v02 PTLTD )
- [ 0.000000] ACPI: XSDT 7f5d87af 0006C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
- [ 0.000000] ACPI: FACP 7f5dfdd6 000F4 (v03 INTEL 06040000 PTL 00000002)
- [ 0.000000] ACPI: DSDT 7f5d993d 06425 (v01 INTEL BEARG31A 06040000 MSFT 03000001)
- [ 0.000000] ACPI: FACS 7f5e2fc0 00040
- [ 0.000000] ACPI: TCPA 7f5dfeca 00032 (v01 Phoeni x 06040000 TL 00000000)
- [ 0.000000] ACPI: MCFG 7f5dfefc 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
- [ 0.000000] ACPI: HPET 7f5dff38 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
- [ 0.000000] ACPI: APIC 7f5dff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
- [ 0.000000] ACPI: BOOT 7f5dffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
- [ 0.000000] ACPI: SSDT 7f5d8d9d 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
- [ 0.000000] ACPI: SSDT 7f5d8cf7 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
- [ 0.000000] ACPI: SSDT 7f5d881b 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 1149MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x0007f5d0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009d
- [ 0.000000] 0: 0x00000100 -> 0x0007f5d0
- [ 0.000000] On node 0 totalpages: 521565
- [ 0.000000] free_area_init_node: node 0, pgdat c0804040, node_mem_map c18ec200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3949 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 2300 pages used for memmap
- [ 0.000000] HighMem zone: 292054 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
- [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
- [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e8000
- [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36416 r0 d20928 u2097152
- [ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517489
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-32-generic root=UUID=ab87973c-2740-403b-84b4-a4c0aedde05c ro quiet splash
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 10433280 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Subtract (51 early reservations)
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
- [ 0.000000] #2 [0000100000 - 00009a7b1c] TEXT DATA BSS
- [ 0.000000] #3 [00009a8000 - 00009ab1c9] BRK
- [ 0.000000] #4 [00000f7f90 - 0000100000] BIOS reserved
- [ 0.000000] #5 [00000f7f80 - 00000f7f90] MP-table mpf
- [ 0.000000] #6 [000009dc00 - 000009e071] BIOS reserved
- [ 0.000000] #7 [000009e1a1 - 00000f7f80] BIOS reserved
- [ 0.000000] #8 [000009e071 - 000009e1a1] MP-table mpc
- [ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE
- [ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP
- [ 0.000000] #11 [0000015000 - 0000016000] PGTABLE
- [ 0.000000] #12 [00009ac000 - 00018eb000] NEW RAMDISK
- [ 0.000000] #13 [00018eb000 - 00018ec000] BOOTMEM
- [ 0.000000] #14 [00018ec000 - 00028dc000] BOOTMEM
- [ 0.000000] #15 [00028dc000 - 00028dc004] BOOTMEM
- [ 0.000000] #16 [00028dc040 - 00028dc100] BOOTMEM
- [ 0.000000] #17 [00028dc100 - 00028dc154] BOOTMEM
- [ 0.000000] #18 [00028dc180 - 00028df180] BOOTMEM
- [ 0.000000] #19 [00028df180 - 00028df1ec] BOOTMEM
- [ 0.000000] #20 [00028df200 - 00028e5200] BOOTMEM
- [ 0.000000] #21 [00028e5200 - 00028e5225] BOOTMEM
- [ 0.000000] #22 [00028e5240 - 00028e5267] BOOTMEM
- [ 0.000000] #23 [00028e5280 - 00028e53ec] BOOTMEM
- [ 0.000000] #24 [00028e5400 - 00028e5440] BOOTMEM
- [ 0.000000] #25 [00028e5440 - 00028e5480] BOOTMEM
- [ 0.000000] #26 [00028e5480 - 00028e54c0] BOOTMEM
- [ 0.000000] #27 [00028e54c0 - 00028e5500] BOOTMEM
- [ 0.000000] #28 [00028e5500 - 00028e5540] BOOTMEM
- [ 0.000000] #29 [00028e5540 - 00028e5580] BOOTMEM
- [ 0.000000] #30 [00028e5580 - 00028e55c0] BOOTMEM
- [ 0.000000] #31 [00028e55c0 - 00028e5600] BOOTMEM
- [ 0.000000] #32 [00028e5600 - 00028e5640] BOOTMEM
- [ 0.000000] #33 [00028e5640 - 00028e5680] BOOTMEM
- [ 0.000000] #34 [00028e5680 - 00028e56c0] BOOTMEM
- [ 0.000000] #35 [00028e56c0 - 00028e5700] BOOTMEM
- [ 0.000000] #36 [00028e5700 - 00028e5710] BOOTMEM
- [ 0.000000] #37 [00028e5740 - 00028e57aa] BOOTMEM
- [ 0.000000] #38 [00028e57c0 - 00028e582a] BOOTMEM
- [ 0.000000] #39 [0002c00000 - 0002c0e000] BOOTMEM
- [ 0.000000] #40 [0002e00000 - 0002e0e000] BOOTMEM
- [ 0.000000] #41 [00028e7840 - 00028e7844] BOOTMEM
- [ 0.000000] #42 [00028e7880 - 00028e7884] BOOTMEM
- [ 0.000000] #43 [00028e78c0 - 00028e78c8] BOOTMEM
- [ 0.000000] #44 [00028e7900 - 00028e7908] BOOTMEM
- [ 0.000000] #45 [00028e7940 - 00028e79e8] BOOTMEM
- [ 0.000000] #46 [00028e7a00 - 00028e7a68] BOOTMEM
- [ 0.000000] #47 [00028e7a80 - 00028eba80] BOOTMEM
- [ 0.000000] #48 [00028eba80 - 000296ba80] BOOTMEM
- [ 0.000000] #49 [000296ba80 - 00029aba80] BOOTMEM
- [ 0.000000] #50 [0002e0e000 - 0003801300] BOOTMEM
- [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f5d0)
- [ 0.000000] Memory: 2034288k/2086720k available (4943k kernel code, 51972k reserved, 2338k data, 692k init, 1177416k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc081d000 - 0xc08ca000 ( 692 kB)
- [ 0.000000] .data : 0xc05d3ece - 0xc081c828 (2338 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc05d3ece (4943 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU-based detection of stalled CPUs is disabled.
- [ 0.000000] Verbose stalled-CPUs detection is disabled.
- [ 0.000000] NR_IRQS:2304 nr_irqs:512
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1662.673 MHz processor.
- [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.34 BogoMIPS (lpj=6650692)
- [ 0.004020] pid_max: default: 32768 minimum: 301
- [ 0.004058] Security Framework initialized
- [ 0.004094] AppArmor: AppArmor initialized
- [ 0.004098] Yama: becoming mindful.
- [ 0.004213] Mount-cache hash table entries: 512
- [ 0.004446] Initializing cgroup subsys ns
- [ 0.004456] Initializing cgroup subsys cpuacct
- [ 0.004466] Initializing cgroup subsys memory
- [ 0.004483] Initializing cgroup subsys devices
- [ 0.004489] Initializing cgroup subsys freezer
- [ 0.004495] Initializing cgroup subsys net_cls
- [ 0.004543] CPU: Physical Processor ID: 0
- [ 0.004548] CPU: Processor Core ID: 0
- [ 0.004554] mce: CPU supports 5 MCE banks
- [ 0.004568] CPU0: Thermal monitoring enabled (TM1)
- [ 0.004576] using mwait in idle threads.
- [ 0.004588] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
- [ 0.004607] ... version: 3
- [ 0.004611] ... bit width: 40
- [ 0.004616] ... generic registers: 2
- [ 0.004621] ... value mask: 000000ffffffffff
- [ 0.004626] ... max period: 000000007fffffff
- [ 0.004631] ... fixed-purpose events: 3
- [ 0.004635] ... event mask: 0000000700000003
- [ 0.012137] ACPI: Core revision 20100428
- [ 0.027527] ftrace: converting mcount calls to 0f 1f 44 00 00
- [ 0.027540] ftrace: allocating 21782 entries in 43 pages
- [ 0.028099] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.032154] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.071848] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
- [ 0.072003] Booting Node 0, Processors #1 Ok.
- [ 0.008000] Initializing CPU#1
- [ 0.160040] Brought up 2 CPUs
- [ 0.160049] Total of 2 processors activated (6650.32 BogoMIPS).
- [ 0.160557] devtmpfs: initialized
- [ 0.162400] regulator: core version 0.5
- [ 0.162440] Time: 15:54:14 Date: 02/03/12
- [ 0.164044] NET: Registered protocol family 16
- [ 0.164154] Trying to unpack rootfs image as initramfs...
- [ 0.164412] EISA bus registered
- [ 0.164437] ACPI: bus type pci registered
- [ 0.164620] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
- [ 0.164632] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
- [ 0.164639] PCI: Using MMCONFIG for extended config space
- [ 0.164646] PCI: Using configuration type 1 for base access
- [ 0.176267] bio: create slab <bio-0> at 0
- [ 0.180805] ACPI: EC: Look up EC in DSDT
- [ 0.194480] ACPI: SSDT 7f5d9666 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
- [ 0.195608] ACPI: Dynamic OEM Table Load:
- [ 0.195620] ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
- [ 0.196389] ACPI: SSDT 7f5d8ffc 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
- [ 0.197454] ACPI: Dynamic OEM Table Load:
- [ 0.197465] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
- [ 0.198522] ACPI: SSDT 7f5d9869 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
- [ 0.199609] ACPI: Dynamic OEM Table Load:
- [ 0.199620] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
- [ 0.200030] ACPI: SSDT 7f5d95e1 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
- [ 0.201094] ACPI: Dynamic OEM Table Load:
- [ 0.201106] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
- [ 0.204770] ACPI: Interpreter enabled
- [ 0.204770] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.204770] ACPI: Using IOAPIC for interrupt routing
- [ 0.221629] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
- [ 0.222193] ACPI: No dock devices found.
- [ 0.222208] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.225166] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- [ 0.225186] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f5b8), AE_ALREADY_EXISTS
- [ 0.225206] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
- [ 0.225274] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
- [ 0.230712] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.230725] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.230735] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
- [ 0.230744] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
- [ 0.230753] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
- [ 0.230763] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
- [ 0.230772] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
- [ 0.230782] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xf7ffffff]
- [ 0.230791] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
- [ 0.230895] pci 0000:00:02.0: reg 10: [mem 0xf0300000-0xf037ffff]
- [ 0.230907] pci 0000:00:02.0: reg 14: [io 0x18e8-0x18ef]
- [ 0.230919] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
- [ 0.230930] pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
- [ 0.230989] pci 0000:00:02.1: reg 10: [mem 0xf0380000-0xf03fffff]
- [ 0.231137] pci 0000:00:1b.0: reg 10: [mem 0xf0400000-0xf0403fff 64bit]
- [ 0.231222] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.231233] pci 0000:00:1b.0: PME# disabled
- [ 0.231373] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.231386] pci 0000:00:1c.0: PME# disabled
- [ 0.231530] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.231541] pci 0000:00:1c.2: PME# disabled
- [ 0.231634] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
- [ 0.231725] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
- [ 0.231815] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
- [ 0.231905] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
- [ 0.231991] pci 0000:00:1d.7: reg 10: [mem 0xf0604000-0xf06043ff]
- [ 0.232105] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.232117] pci 0000:00:1d.7: PME# disabled
- [ 0.232417] pci 0000:00:1f.2: reg 10: [io 0x18e0-0x18e7]
- [ 0.232433] pci 0000:00:1f.2: reg 14: [io 0x18d4-0x18d7]
- [ 0.232448] pci 0000:00:1f.2: reg 18: [io 0x18d8-0x18df]
- [ 0.232463] pci 0000:00:1f.2: reg 1c: [io 0x18d0-0x18d3]
- [ 0.232478] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
- [ 0.232494] pci 0000:00:1f.2: reg 24: [mem 0xf0604400-0xf06047ff]
- [ 0.232547] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.232558] pci 0000:00:1f.2: PME# disabled
- [ 0.232634] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
- [ 0.232808] pci 0000:05:00.0: reg 10: [io 0x2000-0x20ff]
- [ 0.232827] pci 0000:05:00.0: reg 14: [mem 0xf0100000-0xf0103fff]
- [ 0.232936] pci 0000:05:00.0: supports D1 D2
- [ 0.232944] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot
- [ 0.232956] pci 0000:05:00.0: PME# disabled
- [ 0.240081] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
- [ 0.240097] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- [ 0.240109] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
- [ 0.240125] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.240272] pci 0000:09:00.0: reg 10: [mem 0xf0204000-0xf02040ff]
- [ 0.240483] pci 0000:09:00.2: reg 10: [mem 0xf0204400-0xf02044ff]
- [ 0.240689] pci 0000:09:00.3: reg 10: [mem 0xf0204800-0xf02048ff]
- [ 0.240908] pci 0000:09:00.5: reg 10: [mem 0xf0200000-0xf0203fff]
- [ 0.240939] pci 0000:09:00.5: reg 18: [io 0x3400-0x347f]
- [ 0.240958] pci 0000:09:00.5: reg 1c: [io 0x3000-0x30ff]
- [ 0.241058] pci 0000:09:00.5: PME# supported from D0 D3hot D3cold
- [ 0.241071] pci 0000:09:00.5: PME# disabled
- [ 0.248088] pci 0000:00:1c.2: PCI bridge to [bus 09-09]
- [ 0.248105] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
- [ 0.248118] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
- [ 0.248134] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.248257] pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
- [ 0.248269] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
- [ 0.248282] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- [ 0.248298] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.248308] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.248317] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.248327] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
- [ 0.248336] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
- [ 0.248345] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
- [ 0.248355] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
- [ 0.248364] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
- [ 0.248373] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xf7ffffff] (subtractive decode)
- [ 0.248382] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
- [ 0.248418] pci_bus 0000:00: on NUMA node 0
- [ 0.248438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.248788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
- [ 0.249006] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
- [ 0.249242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
- [ 0.249783] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- [ 0.249802] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f5b8), AE_ALREADY_EXISTS
- [ 0.266746] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.267037] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.267309] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.267578] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.267869] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.268204] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.268493] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.268791] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.268941] HEST: Table is not found!
- [ 0.269151] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.269185] vgaarb: loaded
- [ 0.269656] SCSI subsystem initialized
- [ 0.269890] libata version 3.00 loaded.
- [ 0.270058] usbcore: registered new interface driver usbfs
- [ 0.270099] usbcore: registered new interface driver hub
- [ 0.270176] usbcore: registered new device driver usb
- [ 0.270571] ACPI: WMI: Mapper loaded
- [ 0.270578] PCI: Using ACPI for IRQ routing
- [ 0.270587] PCI: pci_cache_line_size set to 64 bytes
- [ 0.270761] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
- [ 0.270770] reserve RAM buffer: 000000007f5d0000 - 000000007fffffff
- [ 0.271031] NetLabel: Initializing
- [ 0.271038] NetLabel: domain hash size = 128
- [ 0.271043] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.271080] NetLabel: unlabeled traffic allowed by default
- [ 0.271188] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.271204] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.271220] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.276088] Switching to clocksource tsc
- [ 0.304258] AppArmor: AppArmor Filesystem Enabled
- [ 0.304295] pnp: PnP ACPI init
- [ 0.304344] ACPI: bus type pnp registered
- [ 0.311070] pnp: PnP ACPI: found 8 devices
- [ 0.311078] ACPI: ACPI bus type pnp unregistered
- [ 0.311089] PnPBIOS: Disabled by ACPI PNP
- [ 0.311133] system 00:01: [io 0x0800-0x080f] has been reserved
- [ 0.311146] system 00:01: [io 0x1000-0x107f] has been reserved
- [ 0.311157] system 00:01: [io 0x1180-0x11bf] has been reserved
- [ 0.311167] system 00:01: [io 0x04d0-0x04d1] has been reserved
- [ 0.311176] system 00:01: [io 0xfe00] has been reserved
- [ 0.311187] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.311197] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
- [ 0.311208] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 0.311217] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
- [ 0.350922] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
- [ 0.350938] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
- [ 0.350948] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
- [ 0.350958] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- [ 0.350971] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
- [ 0.350983] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
- [ 0.351000] pci 0000:00:1c.2: PCI bridge to [bus 09-09]
- [ 0.351009] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
- [ 0.351022] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
- [ 0.351035] pci 0000:00:1c.2: bridge window [mem 0x80200000-0x803fffff 64bit pref]
- [ 0.351050] pci 0000:00:1e.0: PCI bridge to [bus 11-11]
- [ 0.351057] pci 0000:00:1e.0: bridge window [io disabled]
- [ 0.351068] pci 0000:00:1e.0: bridge window [mem disabled]
- [ 0.351078] pci 0000:00:1e.0: bridge window [mem pref disabled]
- [ 0.351108] pci 0000:00:1c.0: enabling device (0000 -> 0003)
- [ 0.351125] alloc irq_desc for 16 on node -1
- [ 0.351131] alloc kstat_irqs on node -1
- [ 0.351148] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.351162] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.351189] alloc irq_desc for 18 on node -1
- [ 0.351195] alloc kstat_irqs on node -1
- [ 0.351207] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.351219] pci 0000:00:1c.2: setting latency timer to 64
- [ 0.351237] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.351248] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.351257] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
- [ 0.351265] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
- [ 0.351274] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
- [ 0.351282] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
- [ 0.351291] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
- [ 0.351300] pci_bus 0000:00: resource 10 [mem 0x000e4000-0x000e7fff]
- [ 0.351309] pci_bus 0000:00: resource 11 [mem 0x80000000-0xf7ffffff]
- [ 0.351317] pci_bus 0000:00: resource 12 [io 0x0d00-0xfdff]
- [ 0.351326] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
- [ 0.351334] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
- [ 0.351343] pci_bus 0000:05: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
- [ 0.351352] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
- [ 0.351360] pci_bus 0000:09: resource 1 [mem 0xf0200000-0xf02fffff]
- [ 0.351369] pci_bus 0000:09: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
- [ 0.351379] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
- [ 0.351386] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
- [ 0.351395] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
- [ 0.351404] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
- [ 0.351413] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
- [ 0.351422] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
- [ 0.351431] pci_bus 0000:11: resource 10 [mem 0x000e4000-0x000e7fff]
- [ 0.351440] pci_bus 0000:11: resource 11 [mem 0x80000000-0xf7ffffff]
- [ 0.351450] pci_bus 0000:11: resource 12 [io 0x0d00-0xfdff]
- [ 0.351540] NET: Registered protocol family 2
- [ 0.351716] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.352361] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.353469] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.354049] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.354057] TCP reno registered
- [ 0.354068] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.354095] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.354355] NET: Registered protocol family 1
- [ 0.354406] pci 0000:00:02.0: Boot video device
- [ 0.354610] PCI: CLS 32 bytes, default 64
- [ 0.354667] Simple Boot Flag at 0x36 set to 0x1
- [ 0.355139] cpufreq-nforce2: No nForce2 chipset.
- [ 0.355228] Scanning for low memory corruption every 60 seconds
- [ 0.355540] audit: initializing netlink socket (disabled)
- [ 0.355566] type=2000 audit(1328284454.348:1): initialized
- [ 0.378739] highmem bounce pool size: 64 pages
- [ 0.378755] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.383625] VFS: Disk quotas dquot_6.5.2
- [ 0.383855] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.385807] fuse init (API version 7.14)
- [ 0.386111] msgmni has been set to 1673
- [ 0.948731] Freeing initrd memory: 15612k freed
- [ 0.965964] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.965972] io scheduler noop registered
- [ 0.965977] io scheduler deadline registered
- [ 0.966020] io scheduler cfq registered (default)
- [ 0.966248] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.966309] alloc irq_desc for 40 on node -1
- [ 0.966314] alloc kstat_irqs on node -1
- [ 0.966333] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
- [ 0.966504] pcieport 0000:00:1c.2: setting latency timer to 64
- [ 0.966560] alloc irq_desc for 41 on node -1
- [ 0.966565] alloc kstat_irqs on node -1
- [ 0.966579] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
- [ 0.966790] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.967011] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- [ 0.967027] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f5b8), AE_ALREADY_EXISTS
- [ 0.967275] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- [ 0.967289] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f5b8), AE_ALREADY_EXISTS
- [ 0.967559] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- [ 0.967573] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f5b8), AE_ALREADY_EXISTS
- [ 0.967844] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- [ 0.967858] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701f5b8), AE_ALREADY_EXISTS
- [ 0.967940] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.968137] intel_idle: MWAIT substates: 0x20220
- [ 0.968142] intel_idle: v0.4 model 0x1C
- [ 0.968146] intel_idle: lapic_timer_reliable_states 0x2
- [ 0.968159] Marking TSC unstable due to TSC halts in idle states deeper than C2
- [ 0.968259] Switching to clocksource hpet
- [ 1.168919] ACPI: AC Adapter [ADP0] (off-line)
- [ 1.169128] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 1.169147] ACPI: Power Button [PWRB]
- [ 1.169244] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
- [ 1.170019] ACPI: Lid Switch [LID0]
- [ 1.170124] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
- [ 1.170134] ACPI: Sleep Button [SLPB]
- [ 1.170257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 1.170266] ACPI: Power Button [PWRF]
- [ 1.170633] ACPI: acpi_idle yielding to intel_idle
- [ 1.186348] thermal LNXTHERM:01: registered as thermal_zone0
- [ 1.186368] ACPI: Thermal Zone [TZ0] (49 C)
- [ 1.186536] ERST: Table is not found!
- [ 1.186853] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.189145] isapnp: Scanning for PnP cards...
- [ 1.190906] brd: module loaded
- [ 1.192529] loop: module loaded
- [ 1.193952] Fixed MDIO Bus: probed
- [ 1.194047] PPP generic driver version 2.4.2
- [ 1.194155] tun: Universal TUN/TAP device driver, 1.6
- [ 1.194161] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.194375] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.194425] alloc irq_desc for 23 on node -1
- [ 1.194431] alloc kstat_irqs on node -1
- [ 1.194449] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1.194484] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 1.194494] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 1.194587] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- [ 1.194636] ehci_hcd 0000:00:1d.7: using broken periodic workaround
- [ 1.194656] ehci_hcd 0000:00:1d.7: debug port 1
- [ 1.198546] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 1.198587] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0604000
- [ 1.207875] ACPI: Battery Slot [BAT0] (battery present)
- [ 1.212031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 1.212347] hub 1-0:1.0: USB hub found
- [ 1.212361] hub 1-0:1.0: 8 ports detected
- [ 1.212552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.212595] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.212668] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1.212685] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 1.212694] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 1.212805] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 1.212851] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
- [ 1.213179] hub 2-0:1.0: USB hub found
- [ 1.213193] hub 2-0:1.0: 2 ports detected
- [ 1.213336] alloc irq_desc for 19 on node -1
- [ 1.213343] alloc kstat_irqs on node -1
- [ 1.213359] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.213373] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 1.213381] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 1.213479] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- [ 1.213541] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
- [ 1.213857] hub 3-0:1.0: USB hub found
- [ 1.213869] hub 3-0:1.0: 2 ports detected
- [ 1.214010] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 1.214025] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 1.214033] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 1.214130] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- [ 1.214190] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
- [ 1.214502] hub 4-0:1.0: USB hub found
- [ 1.214514] hub 4-0:1.0: 2 ports detected
- [ 1.214661] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- [ 1.214675] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 1.214684] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 1.214776] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- [ 1.214840] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
- [ 1.215169] hub 5-0:1.0: USB hub found
- [ 1.215191] hub 5-0:1.0: 2 ports detected
- [ 1.215483] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:SENM] at 0x60,0x64 irq 1,12
- [ 1.221576] i8042.c: Detected active multiplexing controller, rev 1.1.
- [ 1.224160] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.224181] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 1.224263] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 1.224335] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 1.224406] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 1.224710] mice: PS/2 mouse device common for all mice
- [ 1.225262] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 1.225311] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 1.225690] device-mapper: uevent: version 1.0.3
- [ 1.226009] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
- [ 1.226195] device-mapper: multipath: version 1.1.1 loaded
- [ 1.226203] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 1.226541] EISA: Probing bus 0 at eisa.0
- [ 1.226548] EISA: Cannot allocate resource for mainboard
- [ 1.226556] Cannot allocate resource for EISA slot 1
- [ 1.226562] Cannot allocate resource for EISA slot 2
- [ 1.226568] Cannot allocate resource for EISA slot 3
- [ 1.226573] Cannot allocate resource for EISA slot 4
- [ 1.226579] Cannot allocate resource for EISA slot 5
- [ 1.226585] Cannot allocate resource for EISA slot 6
- [ 1.226591] Cannot allocate resource for EISA slot 7
- [ 1.226597] Cannot allocate resource for EISA slot 8
- [ 1.226603] EISA: Detected 0 cards.
- [ 1.226990] cpuidle: using governor ladder
- [ 1.227266] cpuidle: using governor menu
- [ 1.228085] TCP cubic registered
- [ 1.228486] NET: Registered protocol family 10
- [ 1.230009] NET: Registered protocol family 17
- [ 1.231340] Using IPI No-Shortcut mode
- [ 1.231628] PM: Resume from disk failed.
- [ 1.231661] registered taskstats version 1
- [ 1.232371] Magic number: 0:680:941
- [ 1.232514] rtc_cmos 00:04: setting system clock to 2012-02-03 15:54:15 UTC (1328284455)
- [ 1.232526] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.232533] EDD information not available.
- [ 1.241021] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 1.543204] isapnp: No Plug & Play device found
- [ 1.543271] Freeing unused kernel memory: 692k freed
- [ 1.543878] Write protecting the kernel text: 4944k
- [ 1.543967] Write protecting the kernel read-only data: 1984k
- [ 1.593570] udev[78]: starting version 163
- [ 1.904429] sdhci: Secure Digital Host Controller Interface driver
- [ 1.904440] sdhci: Copyright(c) Pierre Ossman
- [ 1.912787] jme: JMicron JMC2XX ethernet driver version 1.0.6
- [ 1.912879] jme 0000:09:00.5: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 1.912908] jme 0000:09:00.5: setting latency timer to 64
- [ 1.959437] jme 0000:09:00.5: eth0: JMC260 Fast Ethernet ver:22 rev:2 macaddr:00:90:f5:a6:6b:a4
- [ 2.013395] sdhci-pci 0000:09:00.0: SDHCI controller found [197b:2382] (rev 80)
- [ 2.013441] sdhci-pci 0000:09:00.0: enabling device (0104 -> 0106)
- [ 2.013465] sdhci-pci 0000:09:00.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 2.013564] sdhci-pci 0000:09:00.0: setting latency timer to 64
- [ 2.013684] Registered led device: mmc0::
- [ 2.013799] mmc0: SDHCI controller on PCI [0000:09:00.0] using ADMA
- [ 2.013837] sdhci-pci 0000:09:00.2: SDHCI controller found [197b:2381] (rev 80)
- [ 2.013873] sdhci-pci 0000:09:00.2: enabling device (0104 -> 0106)
- [ 2.013892] sdhci-pci 0000:09:00.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 2.013915] sdhci-pci 0000:09:00.2: Refusing to bind to secondary interface.
- [ 2.013934] sdhci-pci 0000:09:00.2: PCI INT B disabled
- [ 2.070715] ahci 0000:00:1f.2: version 3.0
- [ 2.070757] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 2.070860] alloc irq_desc for 42 on node -1
- [ 2.070870] alloc kstat_irqs on node -1
- [ 2.070897] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
- [ 2.070987] ahci: SSS flag set, parallel bus scan disabled
- [ 2.071056] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
- [ 2.071071] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
- [ 2.071087] ahci 0000:00:1f.2: setting latency timer to 64
- [ 2.071463] scsi0 : ahci
- [ 2.071916] scsi1 : ahci
- [ 2.072207] scsi2 : ahci
- [ 2.072510] scsi3 : ahci
- [ 2.073148] ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 42
- [ 2.073163] ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 42
- [ 2.073172] ata3: DUMMY
- [ 2.073179] ata4: DUMMY
- [ 2.075191] Linux agpgart interface v0.103
- [ 2.090270] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
- [ 2.091073] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
- [ 2.098081] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
- [ 2.392078] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.393145] ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OC64G, max UDMA/133
- [ 2.393155] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 2.394524] ata1.00: configured for UDMA/133
- [ 2.408367] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5
- [ 2.408927] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 2.409316] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 2.409573] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.409582] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.409688] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.410482] sda: sda1 sda2 < sda5 >
- [ 2.458174] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.728075] ata2: SATA link down (SStatus 0 SControl 300)
- [ 2.833942] [drm] Initialized drm 1.1.0 20060810
- [ 2.930357] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 2.930371] i915 0000:00:02.0: setting latency timer to 64
- [ 2.984134] alloc irq_desc for 43 on node -1
- [ 2.984143] alloc kstat_irqs on node -1
- [ 2.984162] i915 0000:00:02.0: irq 43 for MSI/MSI-X
- [ 2.984184] [drm] set up 7M of stolen space
- [ 3.091102] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 3.091559] [drm] initialized overlay support
- [ 3.484051] Skipping EDID probe due to cached edid
- [ 4.529050] Console: switching to colour frame buffer device 128x37
- [ 4.537444] fb0: inteldrmfb frame buffer device
- [ 4.537450] drm: registered panic notifier
- [ 4.537463] Slow work thread pool: Starting up
- [ 4.537633] Slow work thread pool: Ready
- [ 4.546787] acpi device:01: registered as cooling_device2
- [ 4.547570] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
- [ 4.547722] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 4.547801] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 4.836088] Skipping EDID probe due to cached edid
- [ 5.304272] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 15.460530] Adding 6008828k swap on /dev/sda5. Priority:-1 extents:1 across:6008828k
- [ 15.561585] udev[352]: starting version 163
- [ 15.763896] lp: driver loaded but no devices found
- [ 16.154038] jmb38x_ms 0000:09:00.3: enabling device (0104 -> 0106)
- [ 16.154061] jmb38x_ms 0000:09:00.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 16.154079] jmb38x_ms 0000:09:00.3: setting latency timer to 64
- [ 16.444579] cfg80211: Calling CRDA to update world regulatory domain
- [ 16.580541] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
- [ 16.762363] rtllib_crypt: registered algorithm 'NULL'
- [ 16.762376] rtllib_crypt: registered algorithm 'TKIP'
- [ 16.762384] rtllib_crypt: registered algorithm 'CCMP'
- [ 16.762391] rtllib_crypt: registered algorithm 'WEP'
- [ 16.762398]
- [ 16.762401] Linux kernel driver for RTL8192 based WLAN cards
- [ 16.762409] Copyright (c) 2007-2008, Realsil Wlan Driver
- [ 16.762502] rtl819xSE 0000:05:00.0: enabling device (0104 -> 0107)
- [ 16.762525] rtl819xSE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 16.762543] rtl819xSE 0000:05:00.0: setting latency timer to 64
- [ 16.782909] Memory mapped space start: 0xf0100000
- [ 16.782976] Adapter(8192SE) is found - DeviceID=8172
- [ 16.784833] GetPciBusInfo(): Find Device(10EC:8172) bus=5 dev=0, func=0
- [ 16.786091] GetPciBridegInfo : Find Device(8086:27D0) bus=0 dev=28, func=0
- [ 16.786102] Pci Bridge Vendor is found index: 0
- [ 16.786109] Pci Bridge Vendor is 8086
- [ 16.799929] cfg80211: World regulatory domain updated:
- [ 16.799941] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 16.799954] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 16.799967] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 16.799979] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 16.799990] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 16.800049] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 16.824589] =========>dm_InitRateAdaptiveMask: bUseRAMask=0
- [ 16.848267] rtl8192: wireless switch is on
- [ 16.861189] type=1400 audit(1328284471.124:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=573 comm="apparmor_parser"
- [ 16.862192] type=1400 audit(1328284471.124:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=573 comm="apparmor_parser"
- [ 16.862772] type=1400 audit(1328284471.124:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=573 comm="apparmor_parser"
- [ 17.231932] psmouse serio2: ID: 10 00 64
- [ 17.571780] HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106)
- [ 17.571803] alloc irq_desc for 22 on node -1
- [ 17.571811] alloc kstat_irqs on node -1
- [ 17.571831] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 17.571937] alloc irq_desc for 44 on node -1
- [ 17.571945] alloc kstat_irqs on node -1
- [ 17.571971] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
- [ 17.580935] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 17.952979] type=1400 audit(1328284472.216:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=791 comm="apparmor_parser"
- [ 17.970088] type=1400 audit(1328284472.232:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=790 comm="apparmor_parser"
- [ 17.984873] type=1400 audit(1328284472.248:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=791 comm="apparmor_parser"
- [ 17.986199] type=1400 audit(1328284472.248:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=791 comm="apparmor_parser"
- [ 18.161636] type=1400 audit(1328284472.424:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=799 comm="apparmor_parser"
- [ 18.162939] type=1400 audit(1328284472.424:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=799 comm="apparmor_parser"
- [ 18.166533] type=1400 audit(1328284472.428:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=795 comm="apparmor_parser"
- [ 18.339575] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
- [ 18.339595] ===>rtllib_start_scan()
- [ 18.339766] =====>rtl8192_set_chan()====ch:2
- [ 18.354902] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 18.371356] alloc irq_desc for 45 on node -1
- [ 18.371368] alloc kstat_irqs on node -1
- [ 18.371403] jme 0000:09:00.5: irq 45 for MSI/MSI-X
- [ 18.371779] jme 0000:09:00.5: eth0: Link is down.
- [ 18.373714] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 18.450479] =====>rtl8192_set_chan()====ch:3
- [ 18.514709] =====>rtl8192_set_chan()====ch:1
- [ 18.629076] =====>rtl8192_set_chan()====ch:2
- [ 18.749108] =====>rtl8192_set_chan()====ch:3
- [ 18.802289] ppdev: user-space parallel port driver
- [ 18.873272] =====>rtl8192_set_chan()====ch:4
- [ 18.986096] =====>rtl8192_set_chan()====ch:5
- [ 19.016343] Skipping EDID probe due to cached edid
- [ 19.048332] Skipping EDID probe due to cached edid
- [ 19.173175] =====>rtl8192_set_chan()====ch:6
- [ 19.285121] =====>rtl8192_set_chan()====ch:7
- [ 19.397059] =====>rtl8192_set_chan()====ch:8
- [ 19.587395] =====>rtl8192_set_chan()====ch:9
- [ 19.704088] =====>rtl8192_set_chan()====ch:10
- [ 19.816094] =====>rtl8192_set_chan()====ch:11
- [ 19.990502] =====>rtl8192_set_chan()====ch:12
- [ 19.993491] Finger Sensing Pad, hw: 13.2.1, sw: 1.0.0-K, buttons: 4
- [ 20.117253] =====>rtl8192_set_chan()====ch:13
- [ 20.858746] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
- [ 21.245135] Skipping EDID probe due to cached edid
- [ 21.280112] Skipping EDID probe due to cached edid
- [ 21.405535] Skipping EDID probe due to cached edid
- [ 21.440099] Skipping EDID probe due to cached edid
- [ 23.861951] Skipping EDID probe due to cached edid
- [ 24.022279] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
- [ 24.494597] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio2/input/input6
- [ 38.863170] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
- [ 38.863221] =====>rtl8192_set_chan()====ch:1
- [ 38.980052] =====>rtl8192_set_chan()====ch:2
- [ 39.096074] =====>rtl8192_set_chan()====ch:3
- [ 39.114159] padlock: VIA PadLock not detected.
- [ 39.209079] =====>rtl8192_set_chan()====ch:4
- [ 39.321138] =====>rtl8192_set_chan()====ch:5
- [ 39.433048] =====>rtl8192_set_chan()====ch:6
- [ 39.544074] =====>rtl8192_set_chan()====ch:7
- [ 39.656072] =====>rtl8192_set_chan()====ch:8
- [ 39.768079] =====>rtl8192_set_chan()====ch:9
- [ 39.880090] =====>rtl8192_set_chan()====ch:10
- [ 39.993071] =====>rtl8192_set_chan()====ch:11
- [ 40.104345] =====>rtl8192_set_chan()====ch:12
- [ 40.216069] =====>rtl8192_set_chan()====ch:13
- [ 41.932116] Skipping EDID probe due to cached edid
- [ 41.976156] Skipping EDID probe due to cached edid
- [ 42.016145] Skipping EDID probe due to cached edid
- [ 42.056116] Skipping EDID probe due to cached edid
- [ 42.281131] Skipping EDID probe due to cached edid
- [ 60.080131] Skipping EDID probe due to cached edid
- [ 60.146323] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
- [ 60.146378] =====>rtl8192_set_chan()====ch:1
- [ 60.261712] =====>rtl8192_set_chan()====ch:2
- [ 60.373070] =====>rtl8192_set_chan()====ch:3
- [ 60.485053] =====>rtl8192_set_chan()====ch:4
- [ 60.597055] =====>rtl8192_set_chan()====ch:5
- [ 60.709054] =====>rtl8192_set_chan()====ch:6
- [ 60.821077] =====>rtl8192_set_chan()====ch:7
- [ 60.933053] =====>rtl8192_set_chan()====ch:8
- [ 61.045055] =====>rtl8192_set_chan()====ch:9
- [ 61.157052] =====>rtl8192_set_chan()====ch:10
- [ 61.269054] =====>rtl8192_set_chan()====ch:11
- [ 61.381069] =====>rtl8192_set_chan()====ch:12
- [ 61.493120] =====>rtl8192_set_chan()====ch:13
- [ 61.609526] ===>rtllib_start_scan()
- [ 61.609572] =====>rtl8192_set_chan()====ch:4
- [ 61.620897] Linking with PerunaNet,channel:1, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406
- [ 61.620946] Linking with PerunaNet,channel:1, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406
- [ 61.622548] ===>rtllib_associate_procedure_wq(), chan:1
- [ 61.622561] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
- [ 61.622571] =====>rtl8192_set_chan()====ch:1
- [ 61.634437] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
- [ 61.637647] Association response status code 0x11
- [ 61.637711] ===>rtllib_associate_procedure_wq(), chan:1
- [ 61.637721] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
- [ 61.637731] =====>rtl8192_set_chan()====ch:1
- [ 61.649569] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
- [ 61.656061] RX: IEEE802.1X EAPOL frame!
- [ 61.682697] Associated successfully
- [ 61.682708] normal associate
- [ 61.682738] Using G rates:108
- [ 61.682746] Successfully associated, ht not enabled(0, 0)
- [ 61.682758] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 61.682771] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 61.684536] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 61.694249] RX: IEEE802.1X EAPOL frame!
- [ 61.710538] RX: IEEE802.1X EAPOL frame!
- [ 61.724293] RX: IEEE802.1X EAPOL frame!
- [ 61.741073] RX: IEEE802.1X EAPOL frame!
- [ 61.757091] RX: IEEE802.1X EAPOL frame!
- [ 61.770666] RX: IEEE802.1X EAPOL frame!
- [ 61.775925] RX: IEEE802.1X EAPOL frame!
- [ 61.820084] RX: IEEE802.1X EAPOL frame!
- [ 61.857828] RX: IEEE802.1X EAPOL frame!
- [ 61.864235] RX: IEEE802.1X EAPOL frame!
- [ 61.877727] RX: IEEE802.1X EAPOL frame!
- [ 61.883536] RX: IEEE802.1X EAPOL frame!
- [ 61.890112] RX: IEEE802.1X EAPOL frame!
- [ 61.893564] RX: IEEE802.1X EAPOL frame!
- [ 61.903635] RX: IEEE802.1X EAPOL frame!
- [ 61.927437] alg name:CCMP
- [ 61.928082] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
- [ 61.928322] alg name:TKIP
- [ 62.561991] dm_check_edca_turbo():iot peer is unknown, bssid:00:0b:86:ae:f7:60
- [ 62.901942] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
- [ 63.265812] DHCP pkt src port:68, dest port:67!!
- [ 63.421352] DHCP pkt src port:68, dest port:67!!
- [ 68.746278] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 68.805205] =====>rtl8192_set_chan()====ch:1
- [ 68.917049] =====>rtl8192_set_chan()====ch:2
- [ 69.029082] =====>rtl8192_set_chan()====ch:3
- [ 69.141224] =====>rtl8192_set_chan()====ch:4
- [ 69.253156] =====>rtl8192_set_chan()====ch:5
- [ 69.365078] =====>rtl8192_set_chan()====ch:6
- [ 69.477061] =====>rtl8192_set_chan()====ch:7
- [ 69.589055] =====>rtl8192_set_chan()====ch:8
- [ 69.702076] =====>rtl8192_set_chan()====ch:9
- [ 69.813055] =====>rtl8192_set_chan()====ch:10
- [ 69.929063] =====>rtl8192_set_chan()====ch:11
- [ 70.040073] =====>rtl8192_set_chan()====ch:12
- [ 70.153070] =====>rtl8192_set_chan()====ch:13
- [ 70.265084] =====>rtl8192_set_chan()====ch:1
- [ 70.275270] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 70.275281] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 72.464046] wlan0: no IPv6 routers present
- [ 108.739174] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 108.796215] =====>rtl8192_set_chan()====ch:1
- [ 108.912081] =====>rtl8192_set_chan()====ch:2
- [ 109.028074] =====>rtl8192_set_chan()====ch:3
- [ 109.144070] =====>rtl8192_set_chan()====ch:4
- [ 109.260095] =====>rtl8192_set_chan()====ch:5
- [ 109.376071] =====>rtl8192_set_chan()====ch:6
- [ 109.492071] =====>rtl8192_set_chan()====ch:7
- [ 109.608070] =====>rtl8192_set_chan()====ch:8
- [ 109.724225] =====>rtl8192_set_chan()====ch:9
- [ 109.840047] =====>rtl8192_set_chan()====ch:10
- [ 109.956058] =====>rtl8192_set_chan()====ch:11
- [ 110.072059] =====>rtl8192_set_chan()====ch:12
- [ 110.188117] =====>rtl8192_set_chan()====ch:13
- [ 110.304088] =====>rtl8192_set_chan()====ch:1
- [ 110.314483] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 110.314499] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 110.325867] notify_wx_assoc_event(): Tell user space disconnected
- [ 110.325911] ===>rtllib_start_scan()
- [ 110.326310] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 110.326388] =====>rtl8192_set_chan()====ch:2
- [ 110.342902] Linking with PerunaNet,channel:1, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
- [ 110.342948] Linking with PerunaNet,channel:1, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
- [ 110.368131] ===>rtllib_associate_procedure_wq(), chan:1
- [ 110.368144] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
- [ 110.368155] =====>rtl8192_set_chan()====ch:1
- [ 110.382507] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
- [ 110.389915] Associated successfully
- [ 110.389927] normal associate
- [ 110.389954] Using G rates:108
- [ 110.389962] Successfully associated, ht not enabled(0, 0)
- [ 110.389972] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 110.389984] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 110.391055] RX: IEEE802.1X EAPOL frame!
- [ 110.401475] RX: IEEE802.1X EAPOL frame!
- [ 110.417920] RX: IEEE802.1X EAPOL frame!
- [ 110.432296] RX: IEEE802.1X EAPOL frame!
- [ 110.448169] RX: IEEE802.1X EAPOL frame!
- [ 110.496549] RX: IEEE802.1X EAPOL frame!
- [ 110.525101] RX: IEEE802.1X EAPOL frame!
- [ 110.534962] RX: IEEE802.1X EAPOL frame!
- [ 110.577542] RX: IEEE802.1X EAPOL frame!
- [ 110.583151] RX: IEEE802.1X EAPOL frame!
- [ 110.592678] RX: IEEE802.1X EAPOL frame!
- [ 110.605898] RX: IEEE802.1X EAPOL frame!
- [ 110.618853] RX: IEEE802.1X EAPOL frame!
- [ 110.632538] RX: IEEE802.1X EAPOL frame!
- [ 110.638094] RX: IEEE802.1X EAPOL frame!
- [ 110.649129] RX: IEEE802.1X EAPOL frame!
- [ 110.685342] alg name:CCMP
- [ 110.685977] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
- [ 110.686178] alg name:TKIP
- [ 110.686816] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
- [ 168.739093] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 168.793249] =====>rtl8192_set_chan()====ch:1
- [ 168.905075] =====>rtl8192_set_chan()====ch:2
- [ 169.016622] =====>rtl8192_set_chan()====ch:3
- [ 169.129070] =====>rtl8192_set_chan()====ch:4
- [ 169.240409] =====>rtl8192_set_chan()====ch:5
- [ 169.353089] =====>rtl8192_set_chan()====ch:6
- [ 169.465051] =====>rtl8192_set_chan()====ch:7
- [ 169.577074] =====>rtl8192_set_chan()====ch:8
- [ 169.689498] =====>rtl8192_set_chan()====ch:9
- [ 169.801131] =====>rtl8192_set_chan()====ch:10
- [ 169.913063] =====>rtl8192_set_chan()====ch:11
- [ 170.024249] =====>rtl8192_set_chan()====ch:12
- [ 170.137050] =====>rtl8192_set_chan()====ch:13
- [ 170.249059] =====>rtl8192_set_chan()====ch:1
- [ 170.259271] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 170.259283] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 170.266189] notify_wx_assoc_event(): Tell user space disconnected
- [ 170.266402] ===>rtllib_start_scan()
- [ 170.266428] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 170.266506] =====>rtl8192_set_chan()====ch:2
- [ 170.276616] Linking with PerunaNet,channel:1, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
- [ 170.276684] ===>rtllib_associate_procedure_wq(), chan:1
- [ 170.276693] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
- [ 170.276699] =====>rtl8192_set_chan()====ch:1
- [ 170.293631] Linking with PerunaNet,channel:1, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
- [ 170.301074] ===>rtllib_associate_procedure_wq(), chan:1
- [ 170.301086] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
- [ 170.301096] =====>rtl8192_set_chan()====ch:1
- [ 170.358171] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
- [ 170.368962] Associated successfully
- [ 170.368975] normal associate
- [ 170.369059] Using G rates:108
- [ 170.369068] Successfully associated, ht not enabled(0, 0)
- [ 170.369079] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 170.369093] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 170.370326] RX: IEEE802.1X EAPOL frame!
- [ 185.938761] dis associate packet!
- [ 185.939535] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 186.155626] =====>rtl8192_set_chan()====ch:1
- [ 186.269072] =====>rtl8192_set_chan()====ch:2
- [ 186.384173] =====>rtl8192_set_chan()====ch:3
- [ 186.500103] =====>rtl8192_set_chan()====ch:4
- [ 186.612075] =====>rtl8192_set_chan()====ch:5
- [ 186.725052] =====>rtl8192_set_chan()====ch:6
- [ 186.847129] =====>rtl8192_set_chan()====ch:7
- [ 186.964058] =====>rtl8192_set_chan()====ch:8
- [ 187.080363] =====>rtl8192_set_chan()====ch:9
- [ 187.192246] =====>rtl8192_set_chan()====ch:10
- [ 187.305548] =====>rtl8192_set_chan()====ch:11
- [ 187.417248] =====>rtl8192_set_chan()====ch:12
- [ 187.529075] =====>rtl8192_set_chan()====ch:13
- [ 187.659123] ===>rtllib_start_scan()
- [ 187.659168] =====>rtl8192_set_chan()====ch:2
- [ 187.671079] Linking with PerunaNet,channel:1, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
- [ 187.671127] Linking with PerunaNet,channel:1, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
- [ 187.697066] ===>rtllib_associate_procedure_wq(), chan:1
- [ 187.697079] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
- [ 187.697088] =====>rtl8192_set_chan()====ch:1
- [ 187.709554] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
- [ 187.715580] Associated successfully
- [ 187.715591] normal associate
- [ 187.715617] Using G rates:108
- [ 187.715624] Successfully associated, ht not enabled(0, 0)
- [ 187.715635] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 187.715647] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 187.718673] RX: IEEE802.1X EAPOL frame!
- [ 187.730502] RX: IEEE802.1X EAPOL frame!
- [ 187.731377] alg name:CCMP
- [ 187.732059] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
- [ 187.736334] alg name:TKIP
- [ 187.736975] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
- [ 188.145064] DHCP pkt src port:68, dest port:67!!
- [ 248.734506] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 248.788212] =====>rtl8192_set_chan()====ch:1
- [ 248.900084] =====>rtl8192_set_chan()====ch:2
- [ 249.012092] =====>rtl8192_set_chan()====ch:3
- [ 249.125472] =====>rtl8192_set_chan()====ch:4
- [ 249.236060] =====>rtl8192_set_chan()====ch:5
- [ 249.348068] =====>rtl8192_set_chan()====ch:6
- [ 249.460068] =====>rtl8192_set_chan()====ch:7
- [ 249.572104] =====>rtl8192_set_chan()====ch:8
- [ 249.688063] =====>rtl8192_set_chan()====ch:9
- [ 249.800096] =====>rtl8192_set_chan()====ch:10
- [ 249.912078] =====>rtl8192_set_chan()====ch:11
- [ 250.028039] =====>rtl8192_set_chan()====ch:12
- [ 250.140054] =====>rtl8192_set_chan()====ch:13
- [ 250.252105] =====>rtl8192_set_chan()====ch:1
- [ 250.262297] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 250.262310] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 250.273223] notify_wx_assoc_event(): Tell user space disconnected
- [ 250.273267] ===>rtllib_start_scan()
- [ 250.273371] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 250.273447] =====>rtl8192_set_chan()====ch:2
- [ 250.289930] Linking with PerunaNet,channel:1, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
- [ 250.289976] Linking with PerunaNet,channel:1, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
- [ 250.291909] ===>rtllib_associate_procedure_wq(), chan:1
- [ 250.291922] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
- [ 250.291932] =====>rtl8192_set_chan()====ch:1
- [ 250.325112] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
- [ 250.330646] Associated successfully
- [ 250.330657] normal associate
- [ 250.330684] Using G rates:108
- [ 250.330690] Successfully associated, ht not enabled(0, 0)
- [ 250.330700] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 250.330713] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 250.339827] RX: IEEE802.1X EAPOL frame!
- [ 250.356353] RX: IEEE802.1X EAPOL frame!
- [ 250.358068] alg name:CCMP
- [ 250.358737] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
- [ 250.358966] alg name:TKIP
- [ 250.359605] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
- [ 288.738121] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
- [ 288.738227] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 288.792099] =====>rtl8192_set_chan()====ch:1
- [ 288.904051] =====>rtl8192_set_chan()====ch:2
- [ 289.017409] =====>rtl8192_set_chan()====ch:3
- [ 289.129712] =====>rtl8192_set_chan()====ch:4
- [ 289.240044] =====>rtl8192_set_chan()====ch:5
- [ 289.352403] =====>rtl8192_set_chan()====ch:6
- [ 289.464065] =====>rtl8192_set_chan()====ch:7
- [ 289.576079] =====>rtl8192_set_chan()====ch:8
- [ 289.688048] =====>rtl8192_set_chan()====ch:9
- [ 289.804049] =====>rtl8192_set_chan()====ch:10
- [ 289.916061] =====>rtl8192_set_chan()====ch:11
- [ 290.031709] =====>rtl8192_set_chan()====ch:12
- [ 290.148061] =====>rtl8192_set_chan()====ch:13
- [ 290.261156] =====>rtl8192_set_chan()====ch:1
- [ 290.271168] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 290.271183] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 290.280867] notify_wx_assoc_event(): Tell user space disconnected
- [ 290.280909] ===>rtllib_start_scan()
- [ 290.280933] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 290.280950] =====>rtl8192_set_chan()====ch:2
- [ 290.291914] Linking with PerunaNet,channel:1, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
- [ 290.291963] Linking with PerunaNet,channel:1, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
- [ 290.303033] ===>rtllib_associate_procedure_wq(), chan:1
- [ 290.303045] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
- [ 290.303054] =====>rtl8192_set_chan()====ch:1
- [ 290.314795] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
- [ 290.317884] Association response status code 0x11
- [ 290.317942] ===>rtllib_associate_procedure_wq(), chan:1
- [ 290.317953] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
- [ 290.317963] =====>rtl8192_set_chan()====ch:1
- [ 290.329688] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
- [ 290.338783] Associated successfully
- [ 290.338794] normal associate
- [ 290.338821] Using G rates:108
- [ 290.338829] Successfully associated, ht not enabled(0, 0)
- [ 290.338838] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 290.338850] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 290.340141] RX: IEEE802.1X EAPOL frame!
- [ 290.374631] RX: IEEE802.1X EAPOL frame!
- [ 290.386150] alg name:CCMP
- [ 290.386783] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
- [ 290.386970] alg name:TKIP
- [ 290.387603] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
- [ 348.740331] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
- [ 348.740435] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 348.792097] =====>rtl8192_set_chan()====ch:1
- [ 348.905045] =====>rtl8192_set_chan()====ch:2
- [ 349.017041] =====>rtl8192_set_chan()====ch:3
- [ 349.128379] =====>rtl8192_set_chan()====ch:4
- [ 349.241051] =====>rtl8192_set_chan()====ch:5
- [ 349.352078] =====>rtl8192_set_chan()====ch:6
- [ 349.465081] =====>rtl8192_set_chan()====ch:7
- [ 349.577041] =====>rtl8192_set_chan()====ch:8
- [ 349.689057] =====>rtl8192_set_chan()====ch:9
- [ 349.801043] =====>rtl8192_set_chan()====ch:10
- [ 349.912411] =====>rtl8192_set_chan()====ch:11
- [ 350.024059] =====>rtl8192_set_chan()====ch:12
- [ 350.137073] =====>rtl8192_set_chan()====ch:13
- [ 350.249073] =====>rtl8192_set_chan()====ch:1
- [ 350.259129] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 350.259145] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 350.266666] notify_wx_assoc_event(): Tell user space disconnected
- [ 350.266711] ===>rtllib_start_scan()
- [ 350.266804] Linking with PerunaNet,channel:1, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
- [ 350.266849] Linking with PerunaNet,channel:1, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
- [ 350.293549] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 350.293575] ===>rtllib_associate_procedure_wq(), chan:1
- [ 350.293584] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
- [ 350.293593] =====>rtl8192_set_chan()====ch:1
- [ 350.309886] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
- [ 350.344745] RX: IEEE802.1X EAPOL frame!
- [ 352.816261] Linking with PerunaNet,channel:1, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
- [ 352.816283] ===>rtllib_associate_procedure_wq(), chan:1
- [ 352.816292] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
- [ 352.816301] =====>rtl8192_set_chan()====ch:1
- [ 352.845361] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
- [ 352.871076] RX: IEEE802.1X EAPOL frame!
- [ 352.873634] Associated successfully
- [ 352.873645] normal associate
- [ 352.873678] Using G rates:108
- [ 352.873686] Successfully associated, ht not enabled(0, 0)
- [ 352.873696] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 352.873706] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 352.895063] RX: IEEE802.1X EAPOL frame!
- [ 352.920308] RX: IEEE802.1X EAPOL frame!
- [ 352.945789] RX: IEEE802.1X EAPOL frame!
- [ 352.971587] RX: IEEE802.1X EAPOL frame!
- [ 352.987525] RX: IEEE802.1X EAPOL frame!
- [ 353.020214] RX: IEEE802.1X EAPOL frame!
- [ 353.032205] RX: IEEE802.1X EAPOL frame!
- [ 353.095796] RX: IEEE802.1X EAPOL frame!
- [ 353.100964] RX: IEEE802.1X EAPOL frame!
- [ 353.106734] RX: IEEE802.1X EAPOL frame!
- [ 353.122532] RX: IEEE802.1X EAPOL frame!
- [ 353.131125] RX: IEEE802.1X EAPOL frame!
- [ 353.139183] RX: IEEE802.1X EAPOL frame!
- [ 353.141111] RX: IEEE802.1X EAPOL frame!
- [ 353.150224] RX: IEEE802.1X EAPOL frame!
- [ 353.150498] alg name:CCMP
- [ 353.151125] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
- [ 353.151303] alg name:TKIP
- [ 353.151944] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0
- [ 428.736465] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 428.793277] =====>rtl8192_set_chan()====ch:1
- [ 428.905063] =====>rtl8192_set_chan()====ch:2
- [ 429.017079] =====>rtl8192_set_chan()====ch:3
- [ 429.129059] =====>rtl8192_set_chan()====ch:4
- [ 429.240424] =====>rtl8192_set_chan()====ch:5
- [ 429.353096] =====>rtl8192_set_chan()====ch:6
- [ 429.465057] =====>rtl8192_set_chan()====ch:7
- [ 429.577091] =====>rtl8192_set_chan()====ch:8
- [ 429.689092] =====>rtl8192_set_chan()====ch:9
- [ 429.801075] =====>rtl8192_set_chan()====ch:10
- [ 429.913073] =====>rtl8192_set_chan()====ch:11
- [ 430.025088] =====>rtl8192_set_chan()====ch:12
- [ 430.136631] =====>rtl8192_set_chan()====ch:13
- [ 430.249087] =====>rtl8192_set_chan()====ch:1
- [ 430.259106] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 430.259122] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
- [ 509.346094] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
- [ 528.740971] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 528.796167] =====>rtl8192_set_chan()====ch:1
- [ 528.909375] =====>rtl8192_set_chan()====ch:2
- [ 529.020698] =====>rtl8192_set_chan()====ch:3
- [ 529.133052] =====>rtl8192_set_chan()====ch:4
- [ 529.245844] =====>rtl8192_set_chan()====ch:5
- [ 529.357068] =====>rtl8192_set_chan()====ch:6
- [ 529.469132] =====>rtl8192_set_chan()====ch:7
- [ 529.581068] =====>rtl8192_set_chan()====ch:8
- [ 529.693217] =====>rtl8192_set_chan()====ch:9
- [ 529.805094] =====>rtl8192_set_chan()====ch:10
- [ 529.917061] =====>rtl8192_set_chan()====ch:11
- [ 530.029058] =====>rtl8192_set_chan()====ch:12
- [ 530.140353] =====>rtl8192_set_chan()====ch:13
- [ 530.253076] =====>rtl8192_set_chan()====ch:1
- [ 530.263090] ===>rtl8192se_link_change():ieee->iw_mode is 2
- [ 530.263107] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement