My Pastes
Public Pastes
Layout Width
Share Pastebin
Guest
Public paste!

Untitled

By: a guest | Mar 20th, 2010 | Syntax: None | Size: 30.80 KB | Hits: 95 | Expires: Never
Download | Raw | Embed | Report abuse
Copy text to clipboard
  1. root@PartedMagic:~# dmesg
  2. batch:0
  3.   Normal zone: 1736 pages used for memmap
  4.   Normal zone: 220470 pages, LIFO batch:31
  5.   HighMem zone: 2327 pages used for memmap
  6.   HighMem zone: 295515 pages, LIFO batch:31
  7. Using APIC driver default
  8. Nvidia board detected. Ignoring ACPI timer override.
  9. If you got timer trouble try acpi_use_timer_override
  10. SMP: Allowing 1 CPUs, 0 hotplug CPUs
  11. Found and enabled local APIC!
  12. nr_irqs_gsi: 16
  13. PM: Registered nosave memory: 000000000009b000 - 000000000009c000
  14. PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
  15. PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
  16. PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
  17. Allocating PCI resources starting at 80000000 (gap: 80000000:7ff80000)
  18. NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
  19. PERCPU: Embedded 11 pages at c2a6d000, static data 24444 bytes
  20. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519948
  21. Kernel command line: iso_filename=ubcd50RC1.iso acpi=off edd=off noapic load_ramdisk=1 prompt_ramdisk=0 rw vga=791 sleep=10 loglevel=0 keymap=us initrd=/pmagic/initramfs BOOT_IMAGE=/pmagic/bzImage
  22. PID hash table entries: 4096 (order: 12, 16384 bytes)
  23. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  24. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. Enabling fast FPU save and restore... done.
  26. Enabling unmasked SIMD FPU exception support... done.
  27. Initializing CPU#0
  28. Initializing HighMem for node 0 (000373fe:0007ff70)
  29. Memory: 2067248k/2096576k available (6561k kernel code, 28068k reserved, 3069k data, 452k init, 1191368k highmem)
  30. virtual kernel memory layout:
  31.     fixmap  : 0xffd54000 - 0xfffff000   (2732 kB)
  32.     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
  33.     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
  34.     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
  35.       .init : 0xc1968000 - 0xc19d9000   ( 452 kB)
  36.       .data : 0xc16686d6 - 0xc1967d34   (3069 kB)
  37.       .text : 0xc1000000 - 0xc16686d6   (6561 kB)
  38. Checking if this processor honours the WP bit even in supervisor mode...Ok.
  39. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  40. NR_IRQS:1280
  41. Fast TSC calibration using PIT
  42. Detected 1795.706 MHz processor.
  43. spurious 8259A interrupt: IRQ7.
  44. Console: colour dummy device 80x25
  45. console [tty0] enabled
  46. Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.41 BogoMIPS (lpj=1795706)
  47. Security Framework initialized
  48. Mount-cache hash table entries: 512
  49. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  50. CPU: L2 Cache: 1024K (64 bytes/line)
  51. mce: CPU supports 5 MCE banks
  52. Checking 'hlt' instruction... OK.
  53. Checking for popad bug... OK.
  54. SMP alternatives: switching to UP code
  55. Freeing SMP alternatives: 45k freed
  56. weird, boot CPU (#0) not listed by the BIOS.
  57. SMP motherboard not detected.
  58. SMP disabled
  59. Brought up 1 CPUs
  60. Total of 1 processors activated (3591.41 BogoMIPS).
  61. Booting paravirtualized kernel on bare hardware
  62. xor: automatically using best checksumming function: pIII_sse
  63.    pIII_sse  :  5464.000 MB/sec
  64. xor: using function: pIII_sse (5464.000 MB/sec)
  65. regulator: core version 0.5
  66. NET: Registered protocol family 16
  67. PCI: PCI BIOS revision 2.10 entry at 0xfd69c, last bus=2
  68. PCI: Using configuration type 1 for base access
  69. bio: create slab <bio-0> at 0
  70. ACPI: Interpreter disabled.
  71. SCSI subsystem initialized
  72. libata version 3.00 loaded.
  73. usbcore: registered new interface driver usbfs
  74. usbcore: registered new interface driver hub
  75. usbcore: registered new device driver usb
  76. raid6: int32x1    761 MB/s
  77. raid6: int32x2    691 MB/s
  78. raid6: int32x4    656 MB/s
  79. raid6: int32x8    453 MB/s
  80. raid6: mmxx1     1496 MB/s
  81. raid6: mmxx2     2761 MB/s
  82. raid6: sse1x1    1371 MB/s
  83. raid6: sse1x2    1890 MB/s
  84. raid6: sse2x1    2074 MB/s
  85. raid6: sse2x2    2878 MB/s
  86. raid6: using algorithm sse2x2 (2878 MB/s)
  87. PCI: Probing PCI hardware
  88. PCI: Probing PCI hardware (bus 00)
  89. pci 0000:00:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
  90. pci 0000:00:01.1: reg 20 io port: [0x2040-0x207f]
  91. pci 0000:00:01.1: reg 24 io port: [0x2000-0x203f]
  92. pci 0000:00:01.1: PME# supported from D3hot D3cold
  93. pci 0000:00:01.1: PME# disabled
  94. pci 0000:00:02.0: reg 10 32bit mmio: [0xd0000000-0xd0000fff]
  95. pci 0000:00:02.0: supports D1 D2
  96. pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
  97. pci 0000:00:02.0: PME# disabled
  98. pci 0000:00:02.1: reg 10 32bit mmio: [0xd0001000-0xd0001fff]
  99. pci 0000:00:02.1: supports D1 D2
  100. pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
  101. pci 0000:00:02.1: PME# disabled
  102. pci 0000:00:02.2: reg 10 32bit mmio: [0xd0004000-0xd00040ff]
  103. pci 0000:00:02.2: supports D1 D2
  104. pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
  105. pci 0000:00:02.2: PME# disabled
  106. pci 0000:00:06.0: reg 10 io port: [0x1400-0x14ff]
  107. pci 0000:00:06.0: reg 14 io port: [0x1c00-0x1c7f]
  108. pci 0000:00:06.0: reg 18 32bit mmio: [0xd0002000-0xd0002fff]
  109. pci 0000:00:06.0: supports D1 D2
  110. pci 0000:00:06.1: reg 10 io port: [0x1800-0x18ff]
  111. pci 0000:00:06.1: reg 14 io port: [0x1c80-0x1cff]
  112. pci 0000:00:06.1: reg 18 32bit mmio: [0xd0003000-0xd0003fff]
  113. pci 0000:00:06.1: PME# supported from D3cold
  114. pci 0000:00:06.1: PME# disabled
  115. pci 0000:00:08.0: reg 20 io port: [0x2080-0x208f]
  116. pci 0000:02:06.0: reg 10 32bit mmio: [0xd0100000-0xd010ffff]
  117. pci 0000:02:06.0: PME# supported from D3hot D3cold
  118. pci 0000:02:06.0: PME# disabled
  119. pci 0000:02:07.0: reg 10 32bit mmio: [0xd0116000-0xd0116fff]
  120. pci 0000:02:07.0: supports D1 D2
  121. pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot
  122. pci 0000:02:07.0: PME# disabled
  123. pci 0000:02:07.1: reg 10 32bit mmio: [0xd0117000-0xd01177ff]
  124. pci 0000:02:07.1: reg 14 32bit mmio: [0xd0110000-0xd0113fff]
  125. pci 0000:02:07.1: supports D1 D2
  126. pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot
  127. pci 0000:02:07.1: PME# disabled
  128. pci 0000:02:08.0: reg 10 32bit mmio: [0xd0114000-0xd0115fff]
  129. pci 0000:00:0a.0: bridge io port: [0x3000-0x3fff]
  130. pci 0000:00:0a.0: bridge 32bit mmio: [0xd0100000-0xd04fffff]
  131. pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff]
  132. pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
  133. pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
  134. pci 0000:00:0b.0: bridge 32bit mmio: [0xd1000000-0xd1ffffff]
  135. pci 0000:00:0b.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
  136. pci 0000:00:01.0: default IRQ router [10de:00d0]
  137. pnp: PnP ACPI: disabled
  138. pci 0000:02:07.0: BAR 10: can't allocate mem resource [0xd4000000-0xd04fffff]
  139. pci 0000:02:07.0: CardBus bridge, secondary bus 0000:03
  140. pci 0000:02:07.0:   IO window: 0x003000-0x0030ff
  141. pci 0000:02:07.0:   IO window: 0x003400-0x0034ff
  142. pci 0000:02:07.0:   PREFETCH window: 0x80000000-0x83ffffff
  143. pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
  144. pci 0000:00:0a.0:   IO window: 0x3000-0x3fff
  145. pci 0000:00:0a.0:   MEM window: 0xd0100000-0xd04fffff
  146. pci 0000:00:0a.0:   PREFETCH window: 0x80000000-0x83ffffff
  147. pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff]
  148. pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01
  149. pci 0000:00:0b.0:   IO window: disabled
  150. pci 0000:00:0b.0:   MEM window: 0xd1000000-0xd1ffffff
  151. pci 0000:00:0b.0:   PREFETCH window: 0xe0000000-0xefffffff
  152. pci 0000:00:0a.0: setting latency timer to 64
  153. pci 0000:02:07.0: enabling device (0104 -> 0107)
  154. pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
  155. pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
  156. pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
  157. pci_bus 0000:02: resource 1 mem: [0xd0100000-0xd04fffff]
  158. pci_bus 0000:02: resource 2 pref mem [0x80000000-0x83ffffff]
  159. pci_bus 0000:03: resource 0 io:  [0x3000-0x30ff]
  160. pci_bus 0000:03: resource 1 io:  [0x3400-0x34ff]
  161. pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
  162. pci_bus 0000:01: resource 1 mem: [0xd1000000-0xd1ffffff]
  163. pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
  164. NET: Registered protocol family 2
  165. IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  166. TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  167. TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  168. TCP: Hash tables configured (established 131072 bind 65536)
  169. TCP reno registered
  170. NET: Registered protocol family 1
  171. Trying to unpack rootfs image as initramfs...
  172. Freeing initrd memory: 137k freed
  173. platform rtc_cmos: registered platform RTC device (no PNP device found)
  174. highmem bounce pool size: 64 pages
  175. Loading Reiser4. See www.namesys.com for a description of Reiser4.
  176. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  177. Registering unionfs 2.5.3 (for 2.6.31)
  178. NTFS driver 2.1.29 [Flags: R/W].
  179. ROMFS MTD (C) 2007 Red Hat, Inc.
  180. fuse init (API version 7.12)
  181. JFS: nTxBlock = 8192, nTxLock = 65536
  182. SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
  183. SGI XFS Quota Management subsystem
  184. Btrfs loaded
  185. msgmni has been set to 1712
  186. alg: No test for cipher_null (cipher_null-generic)
  187. alg: No test for ecb(cipher_null) (ecb-cipher_null)
  188. alg: No test for digest_null (digest_null-generic)
  189. alg: No test for compress_null (compress_null-generic)
  190. alg: No test for fcrypt (fcrypt-generic)
  191. alg: No test for stdrng (krng)
  192. async_tx: api initialized (async)
  193. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  194. io scheduler noop registered
  195. io scheduler anticipatory registered
  196. io scheduler deadline registered
  197. io scheduler cfq registered (default)
  198. pci 0000:01:00.0: Boot video device
  199. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  200. vesafb: framebuffer at 0xe0000000, mapped to 0xf8180000, using 3072k, total 65536k
  201. vesafb: mode is 1024x768x16, linelength=2048, pages=1
  202. vesafb: protected mode interface info at c000:e8a0
  203. vesafb: pmi: set display start = c00ce8d6, set palette = c00ce940
  204. vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
  205. vesafb: scrolling: redraw
  206. vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
  207. Console: switching to colour frame buffer device 128x48
  208. fb0: VESA VGA frame buffer device
  209. isapnp: Scanning for PnP cards...
  210. isapnp: No Plug & Play device found
  211. Linux agpgart interface v0.103
  212. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  213. serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
  214. brd: module loaded
  215. loop: module loaded
  216. Compaq SMART2 Driver (v 2.6.0)
  217. HP CISS Driver (v 3.6.20)
  218. input: Macintosh mouse button emulation as /devices/virtual/input/input0
  219. Uniform Multi-Platform E-IDE driver
  220. amd74xx 0000:00:08.0: UDMA133 controller
  221. amd74xx 0000:00:08.0: IDE controller (0x10de:0x00d5 rev 0xa5)
  222. amd74xx 0000:00:08.0: BIOS didn't set cable bits correctly. Enabling workaround.
  223. amd74xx 0000:00:08.0: not 100% native mode: will probe irqs later
  224.     ide0: BM-DMA at 0x2080-0x2087
  225.     ide1: BM-DMA at 0x2088-0x208f
  226. Probing IDE interface ide0...
  227. hda: WDC WD3200BEVE-00A0HT0, ATA DISK drive
  228. hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
  229. hda: UDMA/100 mode selected
  230. Probing IDE interface ide1...
  231. hdc: MATSHITADVD-RAM UJ-820S, ATAPI CD/DVD-ROM drive
  232. hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
  233. hdc: UDMA/33 mode selected
  234. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  235. ide1 at 0x170-0x177,0x376 on irq 15
  236. ide-gd driver 1.18
  237. hda: max request size: 512KiB
  238. hda: Host Protected Area detected.
  239.         current capacity is 268435456 sectors (137438 MB)
  240.         native  capacity is 625142448 sectors (320072 MB)
  241. hda: 268435456 sectors (137438 MB) w/8192KiB Cache, CHS=16709/255/63
  242. hda: cache flushes supported
  243.  hda: hda1
  244. ide-cd driver 5.00
  245. ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
  246. Uniform CD-ROM driver Revision: 3.20
  247. Loading iSCSI transport class v2.0-870.
  248. rdac: device handler registered
  249. hp_sw: device handler registered
  250. emc: device handler registered
  251. alua: device handler registered
  252. fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121
  253. Loading Adaptec I2O RAID: Version 2.4 Build 5go
  254. Detecting Adaptec I2O RAID controllers...
  255. Adaptec aacraid driver 1.1-5[2461]-ms
  256. aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
  257. scsi: <fdomain> Detection failed (no card)
  258. NCR53c406a: no available ports found
  259. sym53c416.c: Version 1.0.0-ac
  260. qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
  261. QLogic Fibre Channel HBA Driver: 8.03.01-k4
  262. iscsi: registered transport (qla4xxx)
  263. QLogic iSCSI HBA Driver
  264. Emulex LightPulse Fibre Channel SCSI driver 8.3.3
  265. Copyright(c) 2004-2009 Emulex.  All rights reserved.
  266. Failed initialization of WD-7000 SCSI card!
  267. DC390: clustering now enabled by default. If you get problems load
  268.        with "disable_clustering=1" and report to maintainers
  269. megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
  270. megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
  271. megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
  272. mpt2sas version 01.100.04.00 loaded
  273. GDT-HA: Storage RAID Controller Driver. Version: 3.05
  274. 3ware Storage Controller device driver for Linux v1.26.02.002.
  275. 3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
  276. nsp32: loading...
  277. ipr: IBM Power RAID SCSI Device Driver version: 2.4.3 (June 10, 2009)
  278. RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
  279. stex: Promise SuperTrak EX Driver version: 4.6.0000.3
  280. cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
  281. iscsi: registered transport (cxgb3i)
  282. Broadcom NetXtreme II iSCSI Driver bnx2i v2.0.1d (Mar 25, 2009)
  283. iscsi: registered transport (bnx2i)
  284. Broadcom NetXtreme II CNIC Driver cnic v2.0.0 (May 21, 2009)
  285. PPP generic driver version 2.4.2
  286. I2O subsystem v1.325
  287. i2o: max drivers = 8
  288. I2O Bus Adapter OSM v1.317
  289. I2O Block Device OSM v1.325
  290. I2O SCSI Peripheral OSM v1.316
  291. I2O ProcFS OSM v1.316
  292. ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[d0117000-d01177ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
  293. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  294. ehci_hcd 0000:00:02.2: setting latency timer to 64
  295. ehci_hcd 0000:00:02.2: EHCI Host Controller
  296. ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
  297. ehci_hcd 0000:00:02.2: debug port 1
  298. ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
  299. ehci_hcd 0000:00:02.2: irq 4, io mem 0xd0004000
  300. ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
  301. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  302. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  303. usb usb1: Product: EHCI Host Controller
  304. usb usb1: Manufacturer: Linux 2.6.31.5-pmagic ehci_hcd
  305. usb usb1: SerialNumber: 0000:00:02.2
  306. usb usb1: configuration #1 chosen from 1 choice
  307. hub 1-0:1.0: USB hub found
  308. hub 1-0:1.0: 6 ports detected
  309. 116x: driver isp116x-hcd, 03 Nov 2005
  310. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  311. ohci_hcd 0000:00:02.0: setting latency timer to 64
  312. ohci_hcd 0000:00:02.0: OHCI Host Controller
  313. ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
  314. ohci_hcd 0000:00:02.0: irq 11, io mem 0xd0000000
  315. usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  316. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  317. usb usb2: Product: OHCI Host Controller
  318. usb usb2: Manufacturer: Linux 2.6.31.5-pmagic ohci_hcd
  319. usb usb2: SerialNumber: 0000:00:02.0
  320. usb usb2: configuration #1 chosen from 1 choice
  321. hub 2-0:1.0: USB hub found
  322. hub 2-0:1.0: 3 ports detected
  323. ohci_hcd 0000:00:02.1: setting latency timer to 64
  324. ohci_hcd 0000:00:02.1: OHCI Host Controller
  325. ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
  326. ohci_hcd 0000:00:02.1: irq 5, io mem 0xd0001000
  327. usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  328. usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  329. usb usb3: Product: OHCI Host Controller
  330. usb usb3: Manufacturer: Linux 2.6.31.5-pmagic ohci_hcd
  331. usb usb3: SerialNumber: 0000:00:02.1
  332. usb usb3: configuration #1 chosen from 1 choice
  333. hub 3-0:1.0: USB hub found
  334. hub 3-0:1.0: 3 ports detected
  335. uhci_hcd: USB Universal Host Controller Interface driver
  336. sl811: driver sl811-hcd, 19 May 2005
  337. r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
  338. Initializing USB Mass Storage driver...
  339. usbcore: registered new interface driver usb-storage
  340. USB Mass Storage support registered.
  341. usbcore: registered new interface driver libusual
  342. usbcore: registered new interface driver ums-alauda
  343. usbcore: registered new interface driver ums-cypress
  344. usbcore: registered new interface driver ums-datafab
  345. usbcore: registered new interface driver ums-freecom
  346. usbcore: registered new interface driver ums-isd200
  347. usbcore: registered new interface driver ums-jumpshot
  348. usbcore: registered new interface driver ums-karma
  349. usbcore: registered new interface driver ums-onetouch
  350. usbcore: registered new interface driver ums-sddr09
  351. usbcore: registered new interface driver ums-sddr55
  352. usbcore: registered new interface driver ums-usbat
  353. PNP: No PS/2 controller found. Probing ports directly.
  354. serio: i8042 KBD port at 0x60,0x64 irq 1
  355. serio: i8042 AUX port at 0x60,0x64 irq 12
  356. mice: PS/2 mouse device common for all mice
  357. i2c /dev entries driver
  358. md: linear personality registered for level -1
  359. md: raid0 personality registered for level 0
  360. md: raid1 personality registered for level 1
  361. md: raid10 personality registered for level 10
  362. md: raid6 personality registered for level 6
  363. md: raid5 personality registered for level 5
  364. md: raid4 personality registered for level 4
  365. md: multipath personality registered for level -4
  366. device-mapper: uevent: version 1.0.3
  367. device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  368. cpuidle: using governor ladder
  369. cpuidle: using governor menu
  370. usbcore: registered new interface driver hiddev
  371. usbcore: registered new interface driver usbhid
  372. usbhid: v2.6:USB HID core driver
  373. Advanced Linux Sound Architecture Driver Version 1.0.20.
  374. ALSA device list:
  375.   No soundcards found.
  376. TCP cubic registered
  377. Initializing XFRM netlink socket
  378. NET: Registered protocol family 17
  379. RPC: Registered udp transport module.
  380. RPC: Registered tcp transport module.
  381. Using IPI No-Shortcut mode
  382. input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
  383. Freeing unused kernel memory: 452k freed
  384. usb 1-1: new high speed USB device using ehci_hcd and address 2
  385. usb 1-1: New USB device found, idVendor=058f, idProduct=6387
  386. usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  387. usb 1-1: Product: Mass Storage Device
  388. usb 1-1: Manufacturer: JetFlash
  389. usb 1-1: SerialNumber: JZJ0MHWO
  390. usb 1-1: configuration #1 chosen from 1 choice
  391. scsi2 : SCSI emulation for USB Mass Storage devices
  392. usb-storage: device found at 2
  393. usb-storage: waiting for device to settle before scanning
  394. usb 1-2: new high speed USB device using ehci_hcd and address 3
  395. usb 1-2: New USB device found, idVendor=058f, idProduct=6387
  396. usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  397. usb 1-2: Product: Mass Storage Device
  398. usb 1-2: Manufacturer: JetFlash
  399. usb 1-2: SerialNumber: CK5WHHIQ
  400. usb 1-2: configuration #1 chosen from 1 choice
  401. scsi3 : SCSI emulation for USB Mass Storage devices
  402. usb-storage: device found at 3
  403. usb-storage: waiting for device to settle before scanning
  404. usb 1-3: new high speed USB device using ehci_hcd and address 4
  405. ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f000018ed97]
  406. usb 1-3: New USB device found, idVendor=152e, idProduct=1640
  407. usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  408. usb 1-3: Product: SuperMulti RW  
  409. usb 1-3: Manufacturer: HLDS Inc
  410. usb 1-3: SerialNumber: 00101016400020EB5
  411. usb 1-3: configuration #1 chosen from 1 choice
  412. scsi4 : SCSI emulation for USB Mass Storage devices
  413. usb-storage: device found at 4
  414. usb-storage: waiting for device to settle before scanning
  415. usb 3-2: new low speed USB device using ohci_hcd and address 2
  416. usb 3-2: New USB device found, idVendor=045e, idProduct=0084
  417. usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  418. usb 3-2: Product: Basic Optical Mouse
  419. usb 3-2: Manufacturer: Microsoft
  420. usb 3-2: configuration #1 chosen from 1 choice
  421. input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb3/3-2/3-2:1.0/input/input2
  422. generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:02.1-2/input0
  423. usb 2-3: new full speed USB device using ohci_hcd and address 2
  424. usb 2-3: New USB device found, idVendor=0483, idProduct=0321
  425. usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  426. usb 2-3: Product: USB Mass Storage Device
  427. usb 2-3: Manufacturer: Generic
  428. usb 2-3: SerialNumber: 7777777777777777
  429. usb 2-3: configuration #1 chosen from 1 choice
  430. scsi5 : SCSI emulation for USB Mass Storage devices
  431. usb-storage: device found at 2
  432. usb-storage: waiting for device to settle before scanning
  433. scsi 2:0:0:0: Direct-Access     JetFlash Transcend 4GB    8.07 PQ: 0 ANSI: 2
  434. usb-storage: device scan complete
  435. sd 2:0:0:0: [sda] 7843838 512-byte logical blocks: (4.01 GB/3.73 GiB)
  436. sd 2:0:0:0: [sda] Write Protect is off
  437. sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
  438. sd 2:0:0:0: [sda] Assuming drive cache: write through
  439. sd 2:0:0:0: [sda] Assuming drive cache: write through
  440.  sda: sda1
  441. sd 2:0:0:0: [sda] Assuming drive cache: write through
  442. sd 2:0:0:0: [sda] Attached SCSI removable disk
  443. scsi 3:0:0:0: Direct-Access     JetFlash TS1GJFV30        8.07 PQ: 0 ANSI: 2
  444. usb-storage: device scan complete
  445. sd 3:0:0:0: [sdb] 1986560 512-byte logical blocks: (1.01 GB/970 MiB)
  446. sd 3:0:0:0: [sdb] Write Protect is off
  447. sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
  448. sd 3:0:0:0: [sdb] Assuming drive cache: write through
  449. sd 3:0:0:0: [sdb] Assuming drive cache: write through
  450.  sdb:
  451. sd 3:0:0:0: [sdb] Assuming drive cache: write through
  452. sd 3:0:0:0: [sdb] Attached SCSI removable disk
  453. scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GE20LU10  FE05 PQ: 0 ANSI: 0
  454. sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  455. sr 4:0:0:0: Attached scsi CD-ROM sr0
  456. usb-storage: device scan complete
  457. scsi 5:0:0:0: Direct-Access     Generic  Flash R/W        2002 PQ: 0 ANSI: 2
  458. usb-storage: device scan complete
  459. sd 5:0:0:0: [sdc] Attached SCSI removable disk
  460. EXT4-fs (/dev/sda): Update your userspace programs to mount using ext4
  461. EXT4-fs (/dev/sda): ext4dev backwards compatibility will go away by 2.6.31
  462. UDF-fs: No partition found (1)
  463. EXT4-fs (/dev/sda1): Update your userspace programs to mount using ext4
  464. EXT4-fs (/dev/sda1): ext4dev backwards compatibility will go away by 2.6.31
  465. EXT4-fs (/dev/sdb): Update your userspace programs to mount using ext4
  466. EXT4-fs (/dev/sdb): ext4dev backwards compatibility will go away by 2.6.31
  467. agpgart-amd64 0000:00:00.0: AGP bridge [10de/00d1]
  468. agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
  469. agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
  470. agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
  471. i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2040
  472. i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000
  473. sd 2:0:0:0: Attached scsi generic sg0 type 0
  474. sd 3:0:0:0: Attached scsi generic sg1 type 0
  475. sr 4:0:0:0: Attached scsi generic sg2 type 5
  476. sd 5:0:0:0: Attached scsi generic sg3 type 0
  477. input: PC Speaker as /devices/platform/pcspkr/input/input3
  478. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  479. rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
  480. rtc0: alarms up to one day, 114 bytes nvram
  481. Intel ICH Modem 0000:00:06.1: setting latency timer to 64
  482. Intel ICH 0000:00:06.0: setting latency timer to 64
  483. yenta_cardbus 0000:02:07.0: CardBus bridge found [1025:0059]
  484. yenta_cardbus 0000:02:07.0: Using CSCINT to route CSC interrupts to PCI
  485. yenta_cardbus 0000:02:07.0: Routing CardBus interrupts to PCI
  486. yenta_cardbus 0000:02:07.0: TI: mfunc 0x007c1b22, devctl 0x44
  487. yenta_cardbus 0000:02:07.0: ISA IRQ mask 0x02c8, PCI irq 10
  488. yenta_cardbus 0000:02:07.0: Socket status: 30000086
  489. pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
  490. yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
  491. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
  492. yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd04fffff
  493. yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
  494. acerhdf: Acer Aspire One Fan driver, v.0.5.13
  495. acerhdf: no Aspire One hardware found
  496. acer_wmi: Unknown symbol wmi_evaluate_method
  497. acer_wmi: Unknown symbol wmi_has_guid
  498. acer_wmi: Unknown symbol wmi_query_block
  499. ssb: Sonics Silicon Backplane found on PCI device 0000:02:08.0
  500. tg3.c:v3.99 (April 20, 2009)
  501. tg3 0000:02:06.0: PME# disabled
  502. cfg80211: Using static regulatory domain info
  503. cfg80211: Regulatory domain: US
  504.         (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  505.         (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
  506.         (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  507.         (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  508.         (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  509.         (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  510.         (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
  511. cfg80211: Calling CRDA for country: US
  512. eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:c0:9f:3c:fb:65
  513. eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0])
  514. eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
  515. eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
  516. intel8x0_measure_ac97_clock: measured 50647 usecs (2464 samples)
  517. intel8x0: clocking to 47358
  518. b43-phy0: Broadcom 4306 WLAN found (core revision 5)
  519. phy0: Selected rate control algorithm 'minstrel'
  520. Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
  521. input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
  522. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  523. NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
  524. NFSD: unable to find recovery directory /var/lib/nfs/v4recovery
  525. NFSD: starting 90-second grace period
  526. NET: Registered protocol family 10
  527. lo: Disabled Privacy Extensions
  528. svc: failed to register lockdv1 RPC service (errno 97).
  529. unionfs: new lower inode mtime (bindex=1, name=share)
  530. unionfs: new lower inode mtime (bindex=1, name=share)
  531. unionfs: new lower inode mtime (bindex=1, name=bin)
  532. unionfs: new lower inode ctime (bindex=1, name=bin)
  533. unionfs: new lower inode mtime (bindex=1, name=/)
  534. unionfs: new lower inode ctime (bindex=1, name=/)
  535. unionfs: new lower inode ctime (bindex=1, name=bin)
  536. unionfs: new lower inode mtime (bindex=1, name=applications)
  537. unionfs: new lower inode mtime (bindex=1, name=share)
  538. unionfs: new lower inode mtime (bindex=1, name=hicolor)
  539. unionfs: new lower inode mtime (bindex=1, name=apps)
  540. unionfs: new lower inode ctime (bindex=1, name=apps)
  541. unionfs: new lower inode mtime (bindex=1, name=hicolor)
  542. unionfs: new lower inode ctime (bindex=1, name=hicolor)
  543. unionfs: new lower inode mtime (bindex=1, name=applications)
  544. unionfs: new lower inode ctime (bindex=1, name=applications)
  545. unionfs: new lower inode mtime (bindex=1, name=share)
  546. unionfs: new lower inode ctime (bindex=1, name=share)
  547. unionfs: new lower inode mtime (bindex=1, name=/)
  548. unionfs: new lower inode ctime (bindex=1, name=/)
  549. unionfs: new lower inode ctime (bindex=1, name=share)
  550. unionfs: new lower inode ctime (bindex=1, name=applications)
  551. unionfs: new lower inode ctime (bindex=1, name=hicolor)
  552. unionfs: new lower inode ctime (bindex=1, name=apps)
  553. unionfs: new lower inode mtime (bindex=1, name=apps)
  554. unionfs: new lower inode ctime (bindex=1, name=apps)
  555. unionfs: new lower inode mtime (bindex=1, name=hicolor)
  556. unionfs: new lower inode ctime (bindex=1, name=hicolor)
  557. unionfs: new lower inode mtime (bindex=1, name=applications)
  558. unionfs: new lower inode ctime (bindex=1, name=applications)
  559. unionfs: new lower inode mtime (bindex=1, name=share)
  560. unionfs: new lower inode ctime (bindex=1, name=share)
  561. unionfs: new lower inode mtime (bindex=1, name=/)
  562. unionfs: new lower inode ctime (bindex=1, name=/)
  563. unionfs: new lower inode ctime (bindex=1, name=share)
  564. unionfs: new lower inode ctime (bindex=1, name=applications)
  565. unionfs: new lower inode ctime (bindex=1, name=hicolor)
  566. unionfs: new lower inode ctime (bindex=1, name=apps)
  567. unionfs: new lower inode mtime (bindex=1, name=apps)
  568. unionfs: new lower inode ctime (bindex=1, name=apps)
  569. unionfs: new lower inode mtime (bindex=1, name=hicolor)
  570. unionfs: new lower inode ctime (bindex=1, name=hicolor)
  571. unionfs: new lower inode mtime (bindex=1, name=applications)
  572. unionfs: new lower inode ctime (bindex=1, name=applications)
  573. unionfs: new lower inode mtime (bindex=1, name=share)
  574. unionfs: new lower inode ctime (bindex=1, name=share)
  575. unionfs: new lower inode mtime (bindex=1, name=/)
  576. unionfs: new lower inode ctime (bindex=1, name=/)
  577. unionfs: new lower inode ctime (bindex=1, name=share)
  578. unionfs: new lower inode ctime (bindex=1, name=applications)
  579. unionfs: new lower inode ctime (bindex=1, name=hicolor)
  580. unionfs: new lower inode ctime (bindex=1, name=apps)
  581. unionfs: new lower inode mtime (bindex=1, name=apps)
  582. unionfs: new lower inode ctime (bindex=1, name=apps)
  583. unionfs: new lower inode mtime (bindex=1, name=hicolor)
  584. unionfs: new lower inode ctime (bindex=1, name=hicolor)
  585. unionfs: new lower inode mtime (bindex=1, name=applications)
  586. unionfs: new lower inode ctime (bindex=1, name=applications)
  587. unionfs: new lower inode mtime (bindex=1, name=share)
  588. unionfs: new lower inode ctime (bindex=1, name=share)
  589. unionfs: new lower inode mtime (bindex=1, name=/)
  590. unionfs: new lower inode ctime (bindex=1, name=/)
  591. unionfs: new lower inode ctime (bindex=1, name=share)
  592. unionfs: new lower inode ctime (bindex=1, name=applications)
  593. unionfs: new lower inode mtime (bindex=1, name=share)
  594. unionfs: new lower inode ctime (bindex=1, name=applications)
  595. unionfs: new lower inode ctime (bindex=1, name=applications)
  596. unionfs: new lower inode ctime (bindex=1, name=pixmaps)
  597. unionfs: new lower inode ctime (bindex=1, name=pixmaps)
  598. unionfs: new lower inode ctime (bindex=1, name=share)
  599. unionfs: new lower inode ctime (bindex=1, name=share)
  600. unionfs: new lower inode ctime (bindex=1, name=bin)
  601. unionfs: new lower inode ctime (bindex=1, name=bin)
  602. unionfs: new lower inode mtime (bindex=1, name=/)
  603. unionfs: new lower inode ctime (bindex=1, name=/)
  604. unionfs: new lower inode ctime (bindex=1, name=bin)
  605. FAT: invalid media value (0xb9)
  606. VFS: Can't find a valid FAT filesystem on dev hda1.
  607. Bluetooth: Core ver 2.15
  608. NET: Registered protocol family 31
  609. Bluetooth: HCI device and connection manager initialized
  610. Bluetooth: HCI socket layer initialized
  611. unionfs: new lower inode ctime (bindex=1, name=share)
  612. Bluetooth: L2CAP ver 2.13
  613. Bluetooth: L2CAP socket layer initialized
  614. Bluetooth: RFCOMM TTY layer initialized
  615. Bluetooth: RFCOMM socket layer initialized
  616. Bluetooth: RFCOMM ver 1.11
  617. Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  618. Bluetooth: BNEP filters: protocol multicast
  619. unionfs: new lower inode ctime (bindex=1, name=applications)
  620. unionfs: new lower inode ctime (bindex=1, name=pixmaps)
  621. unionfs: new lower inode ctime (bindex=1, name=hicolor)
  622. unionfs: new lower inode ctime (bindex=1, name=apps)
  623. tg3 0000:02:06.0: firmware: requesting tigon/tg3_tso5.bin
  624. tg3 0000:02:06.0: PME# disabled
  625. ADDRCONF(NETDEV_UP): eth0: link is not ready
  626. tg3: eth0: Link is up at 100 Mbps, full duplex.
  627. tg3: eth0: Flow control is on for TX and on for RX.
  628. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  629. unionfs: new lower inode mtime (bindex=1, name=lib)
  630. eth0: no IPv6 routers present
create new paste | create new version of this paste RAW Paste Data