Advertisement
Guest User

Untitled

a guest
Oct 12th, 2014
319
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.62 KB | None | 0 0
  1. smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.11.10-21-desktop] (SUSE RPM)
  2. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: WDC WD60EZRX-00MVLB1
  6. Serial Number: WD-WX41D3404227
  7. LU WWN Device Id: 5 0014ee 2b54a4503
  8. Firmware Version: 80.00A80
  9. User Capacity: 6.001.175.126.016 bytes [6,00 TB]
  10. Sector Sizes: 512 bytes logical, 4096 bytes physical
  11. Rotation Rate: 5700 rpm
  12. Device is: Not in smartctl database [for details use: -P showall]
  13. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  14. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
  15. Local Time is: Mon Oct 13 06:40:07 2014 CEST
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18. AAM feature is: Unavailable
  19. APM feature is: Unavailable
  20. Rd look-ahead is: Enabled
  21. Write cache is: Enabled
  22. ATA Security is: Disabled, NOT FROZEN [SEC1]
  23. Wt Cache Reorder: Enabled
  24.  
  25. === START OF READ SMART DATA SECTION ===
  26. SMART overall-health self-assessment test result: PASSED
  27.  
  28. General SMART Values:
  29. Offline data collection status: (0x80) Offline data collection activity
  30. was never started.
  31. Auto Offline Data Collection: Enabled.
  32. Self-test execution status: ( 0) The previous self-test routine completed
  33. without error or no self-test has ever
  34. been run.
  35. Total time to complete Offline
  36. data collection: ( 5024) seconds.
  37. Offline data collection
  38. capabilities: (0x7b) SMART execute Offline immediate.
  39. Auto Offline data collection on/off support.
  40. Suspend Offline collection upon new
  41. command.
  42. Offline surface scan supported.
  43. Self-test supported.
  44. Conveyance Self-test supported.
  45. Selective Self-test supported.
  46. SMART capabilities: (0x0003) Saves SMART data before entering
  47. power-saving mode.
  48. Supports SMART auto save timer.
  49. Error logging capability: (0x01) Error logging supported.
  50. General Purpose Logging supported.
  51. Short self-test routine
  52. recommended polling time: ( 2) minutes.
  53. Extended self-test routine
  54. recommended polling time: ( 703) minutes.
  55. Conveyance self-test routine
  56. recommended polling time: ( 5) minutes.
  57. SCT capabilities: (0x3035) SCT Status supported.
  58. SCT Feature Control supported.
  59. SCT Data Table supported.
  60.  
  61. SMART Attributes Data Structure revision number: 16
  62. Vendor Specific SMART Attributes with Thresholds:
  63. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  64. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
  65. 3 Spin_Up_Time POS--K 100 253 021 - 0
  66. 4 Start_Stop_Count -O--CK 100 100 000 - 5
  67. 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  68. 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
  69. 9 Power_On_Hours -O--CK 100 100 000 - 53
  70. 10 Spin_Retry_Count -O--CK 100 253 000 - 0
  71. 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
  72. 12 Power_Cycle_Count -O--CK 100 100 000 - 5
  73. 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
  74. 193 Load_Cycle_Count -O--CK 200 200 000 - 59
  75. 194 Temperature_Celsius -O---K 127 108 000 - 25
  76. 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  77. 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  78. 198 Offline_Uncorrectable ----CK 100 253 000 - 0
  79. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  80. 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
  81. ||||||_ K auto-keep
  82. |||||__ C event count
  83. ||||___ R error rate
  84. |||____ S speed/performance
  85. ||_____ O updated online
  86. |______ P prefailure warning
  87.  
  88. General Purpose Log Directory Version 1
  89. SMART Log Directory Version 1 [multi-sector log support]
  90. Address Access R/W Size Description
  91. 0x00 GPL,SL R/O 1 Log Directory
  92. 0x01 SL R/O 1 Summary SMART error log
  93. 0x02 SL R/O 5 Comprehensive SMART error log
  94. 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  95. 0x06 SL R/O 1 SMART self-test log
  96. 0x07 GPL R/O 1 Extended self-test log
  97. 0x09 SL R/W 1 Selective self-test log
  98. 0x10 GPL R/O 1 NCQ Command Error log
  99. 0x11 GPL R/O 1 SATA Phy Event Counters
  100. 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
  101. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  102. 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
  103. 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
  104. 0xb7 GPL,SL VS 40 Device vendor specific log
  105. 0xbd GPL,SL VS 1 Device vendor specific log
  106. 0xc0 GPL,SL VS 1 Device vendor specific log
  107. 0xc1 GPL VS 93 Device vendor specific log
  108. 0xe0 GPL,SL R/W 1 SCT Command/Status
  109. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  110.  
  111. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  112. No Errors Logged
  113.  
  114. SMART Extended Self-test Log Version: 1 (1 sectors)
  115. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  116. # 1 Short offline Completed without error 00% 53 -
  117. # 2 Short offline Completed without error 00% 46 -
  118. # 3 Selective offline Completed without error 00% 45 -
  119. # 4 Short offline Completed without error 00% 45 -
  120. # 5 Short offline Completed without error 00% 45 -
  121. # 6 Selective offline Completed without error 00% 44 -
  122. # 7 Extended offline Completed without error 00% 44 -
  123. # 8 Selective offline Aborted by host 10% 4 -
  124. # 9 Short offline Completed without error 00% 2 -
  125. #10 Conveyance offline Completed without error 00% 0 -
  126. #11 Short offline Completed without error 00% 0 -
  127.  
  128. SMART Selective self-test log data structure revision number 1
  129. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  130. 1 0 0 Not_testing
  131. 2 0 0 Not_testing
  132. 3 0 0 Not_testing
  133. 4 0 0 Not_testing
  134. 5 0 0 Not_testing
  135. Selective self-test flags (0x0):
  136. After scanning selected spans, do NOT read-scan remainder of disk.
  137. If Selective self-test is pending on power-up, resume after 0 minute delay.
  138.  
  139. SCT Status Version: 3
  140. SCT Version (vendor specific): 258 (0x0102)
  141. SCT Support Level: 1
  142. Device State: Active (0)
  143. Current Temperature: 25 Celsius
  144. Power Cycle Min/Max Temperature: 25/25 Celsius
  145. Lifetime Min/Max Temperature: 23/44 Celsius
  146. Under/Over Temperature Limit Count: 0/0
  147.  
  148. SCT Temperature History Version: 2
  149. Temperature Sampling Period: 1 minute
  150. Temperature Logging Interval: 1 minute
  151. Min/Max recommended Temperature: 0/60 Celsius
  152. Min/Max Temperature Limit: -41/85 Celsius
  153. Temperature History Size (Index): 478 (372)
  154.  
  155. Index Estimated Time Temperature Celsius
  156. 373 2014-10-12 22:43 32 *************
  157. 374 2014-10-12 22:44 32 *************
  158. 375 2014-10-12 22:45 32 *************
  159. 376 2014-10-12 22:46 33 **************
  160. ... ..( 3 skipped). .. **************
  161. 380 2014-10-12 22:50 33 **************
  162. 381 2014-10-12 22:51 34 ***************
  163. ... ..( 2 skipped). .. ***************
  164. 384 2014-10-12 22:54 34 ***************
  165. 385 2014-10-12 22:55 35 ****************
  166. ... ..( 3 skipped). .. ****************
  167. 389 2014-10-12 22:59 35 ****************
  168. 390 2014-10-12 23:00 36 *****************
  169. ... ..( 3 skipped). .. *****************
  170. 394 2014-10-12 23:04 36 *****************
  171. 395 2014-10-12 23:05 37 ******************
  172. ... ..( 7 skipped). .. ******************
  173. 403 2014-10-12 23:13 37 ******************
  174. 404 2014-10-12 23:14 38 *******************
  175. ... ..( 7 skipped). .. *******************
  176. 412 2014-10-12 23:22 38 *******************
  177. 413 2014-10-12 23:23 39 ********************
  178. ... ..( 10 skipped). .. ********************
  179. 424 2014-10-12 23:34 39 ********************
  180. 425 2014-10-12 23:35 40 *********************
  181. ... ..( 26 skipped). .. *********************
  182. 452 2014-10-13 00:02 40 *********************
  183. 453 2014-10-13 00:03 41 **********************
  184. ... ..(192 skipped). .. **********************
  185. 168 2014-10-13 03:16 41 **********************
  186. 169 2014-10-13 03:17 40 *********************
  187. ... ..( 8 skipped). .. *********************
  188. 178 2014-10-13 03:26 40 *********************
  189. 179 2014-10-13 03:27 39 ********************
  190. ... ..( 20 skipped). .. ********************
  191. 200 2014-10-13 03:48 39 ********************
  192. 201 2014-10-13 03:49 38 *******************
  193. ... ..( 74 skipped). .. *******************
  194. 276 2014-10-13 05:04 38 *******************
  195. 277 2014-10-13 05:05 37 ******************
  196. ... ..( 82 skipped). .. ******************
  197. 360 2014-10-13 06:28 37 ******************
  198. 361 2014-10-13 06:29 38 *******************
  199. 362 2014-10-13 06:30 ? -
  200. 363 2014-10-13 06:31 25 ******
  201. 364 2014-10-13 06:32 26 *******
  202. 365 2014-10-13 06:33 26 *******
  203. 366 2014-10-13 06:34 26 *******
  204. 367 2014-10-13 06:35 27 ********
  205. 368 2014-10-13 06:36 27 ********
  206. 369 2014-10-13 06:37 27 ********
  207. 370 2014-10-13 06:38 ? -
  208. 371 2014-10-13 06:39 25 ******
  209. 372 2014-10-13 06:40 25 ******
  210.  
  211. SCT Error Recovery Control command not supported
  212.  
  213. Device Statistics (GP Log 0x04) not supported
  214.  
  215. SATA Phy Event Counters (GP Log 0x11)
  216. ID Size Value Description
  217. 0x0001 2 0 Command failed due to ICRC error
  218. 0x0002 2 0 R_ERR response for data FIS
  219. 0x0003 2 0 R_ERR response for device-to-host data FIS
  220. 0x0004 2 0 R_ERR response for host-to-device data FIS
  221. 0x0005 2 0 R_ERR response for non-data FIS
  222. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  223. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  224. 0x0008 2 0 Device-to-host non-data FIS retries
  225. 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
  226. 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
  227. 0x000b 2 0 CRC errors within host-to-device FIS
  228. 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
  229. 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
  230. 0x8000 4 65 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement