Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- OpenBSD 5.3 (RAMDISK_CD) #49: Tue Mar 12 18:50:37 MDT 2013
- deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
- cpu0: Vortex86 SoC (586-class) 934 MHz
- cpu0: FPU,TSC,CX8,MMX
- real mem = 536408064 (511MB)
- avail mem = 519872512 (495MB)
- mainbus0 at root
- bios0 at mainbus0: AT/286+ BIOS, date 06/17/11, BIOS32 rev. 0 @ 0xf0010
- apm0 at bios0: Power Management spec V1.2
- pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
- pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2fe0/240 (13 entries)
- pcibios0: no compatible PCI ICU found: ICU vendor 0x17f3 product 0x6036
- pcibios0: Warning, unable to fix up PCI interrupt routing
- pcibios0: PCI bus #0 is the last bus
- bios0: ROM list: 0xc0000/0x8000
- cpu0 at mainbus0: (uniprocessor)
- pci0 at mainbus0 bus 0: configuration mode 1 (bios)
- pchb0 at pci0 dev 0 function 0 "RDC R6021 Host" rev 0x02
- pcib0 at pci0 dev 7 function 0 vendor "RDC", unknown product 0x6036 rev 0x00
- vte0 at pci0 dev 8 function 0 "RDC R6040 Ethernet" rev 0x00: irq 7, address 00:1b:eb:35:25:04
- rdcphy0 at vte0 phy 1: R6040 10/100 PHY, rev. 1
- ohci0 at pci0 dev 10 function 0 "RDC R6060 USB" rev 0x12: irq 3, version 1.0, legacy support
- ehci0 at pci0 dev 10 function 1 "RDC R6061 USB" rev 0x03: irq 5
- usb0 at ehci0: USB revision 2.0
- uhub0 at usb0 "RDC EHCI root hub" rev 2.00/1.00 addr 1
- ohci1 at pci0 dev 11 function 0 "RDC R6060 USB" rev 0x12: irq 15, version 1.0, legacy support
- ehci1 at pci0 dev 11 function 1 "RDC R6061 USB" rev 0x03: irq 9
- usb1 at ehci1: USB revision 2.0
- uhub1 at usb1 "RDC EHCI root hub" rev 2.00/1.00 addr 1
- pciide0 at pci0 dev 12 function 0 "Intel 82801EB/ER IDE" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
- pciide0: using irq 14 for native-PCI interrupt
- wd0 at pciide0 channel 0 drive 0: <SD16G RDC SD-IDE HOST CONTROLLER>
- wd0: 1-sector PIO, LBA, 15193MB, 31116288 sectors
- wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
- pciide0: channel 1 disabled (no drives)
- vga1 at pci0 dev 13 function 0 vendor "RDC", unknown product 0x2010 rev 0x00
- wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
- vendor "RDC", unknown product 0x3010 (class multimedia subclass hdaudio, rev 0x01) at pci0 dev 14 function 0 not configured
- isa0 at pcib0
- isadma0 at isa0
- com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
- com0: probed fifo depth: 0 bytes
- com2: irq 5 already in use
- pckbc0 at isa0 port 0x60/5
- pckbd0 at pckbc0 (kbd slot)
- pckbc0: using irq 1 for kbd slot
- wskbd0 at pckbd0: console keyboard, using wsdisplay0
- npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
- usb2 at ohci0: USB revision 1.0
- uhub2 at usb2 "RDC OHCI root hub" rev 1.00/1.00 addr 1
- usb3 at ohci1: USB revision 1.0
- uhub3 at usb3 "RDC OHCI root hub" rev 1.00/1.00 addr 1
- uhub1: device problem, disabling port 1
- uhidev0 at uhub2 port 1 configuration 1 interface 0 "vendor 0x0430 product 0x0005" rev 1.10/2.00 addr 2
- uhidev0: iclass 3/1
- ukbd0 at uhidev0
- wskbd1 at ukbd0 mux 1
- wskbd1: connecting to wsdisplay0
- softraid0 at root
- scsibus0 at softraid0: 256 targets
- root on rd0a swap on rd0b dump on rd0b
- OpenBSD 5.3 (RAMDISK_CD) #49: Tue Mar 12 18:50:37 MDT 2013
- deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
- cpu0: Vortex86 SoC (586-class) 934 MHz
- cpu0: FPU,TSC,CX8,MMX
- real mem = 536408064 (511MB)
- avail mem = 519872512 (495MB)
- mainbus0 at root
- bios0 at mainbus0: AT/286+ BIOS, date 06/17/11, BIOS32 rev. 0 @ 0xf0010
- apm0 at bios0: Power Management spec V1.2
- pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
- pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2fe0/240 (13 entries)
- pcibios0: no compatible PCI ICU found: ICU vendor 0x17f3 product 0x6036
- pcibios0: Warning, unable to fix up PCI interrupt routing
- pcibios0: PCI bus #0 is the last bus
- bios0: ROM list: 0xc0000/0x8000
- cpu0 at mainbus0: (uniprocessor)
- pci0 at mainbus0 bus 0: configuration mode 1 (bios)
- pchb0 at pci0 dev 0 function 0 "RDC R6021 Host" rev 0x02
- pcib0 at pci0 dev 7 function 0 vendor "RDC", unknown product 0x6036 rev 0x00
- vte0 at pci0 dev 8 function 0 "RDC R6040 Ethernet" rev 0x00: irq 7, address 00:1b:eb:35:25:04
- rdcphy0 at vte0 phy 1: R6040 10/100 PHY, rev. 1
- ohci0 at pci0 dev 10 function 0 "RDC R6060 USB" rev 0x12: irq 3, version 1.0, legacy support
- ehci0 at pci0 dev 10 function 1 "RDC R6061 USB" rev 0x03: irq 5
- usb0 at ehci0: USB revision 2.0
- uhub0 at usb0 "RDC EHCI root hub" rev 2.00/1.00 addr 1
- ohci1 at pci0 dev 11 function 0 "RDC R6060 USB" rev 0x12: irq 15, version 1.0, legacy support
- ehci1 at pci0 dev 11 function 1 "RDC R6061 USB" rev 0x03: irq 9
- usb1 at ehci1: USB revision 2.0
- uhub1 at usb1 "RDC EHCI root hub" rev 2.00/1.00 addr 1
- pciide0 at pci0 dev 12 function 0 "Intel 82801EB/ER IDE" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
- pciide0: using irq 14 for native-PCI interrupt
- wd0 at pciide0 channel 0 drive 0: <SD16G RDC SD-IDE HOST CONTROLLER>
- wd0: 1-sector PIO, LBA, 15193MB, 31116288 sectors
- wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
- pciide0: channel 1 disabled (no drives)
- vga1 at pci0 dev 13 function 0 vendor "RDC", unknown product 0x2010 rev 0x00
- wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
- vendor "RDC", unknown product 0x3010 (class multimedia subclass hdaudio, rev 0x01) at pci0 dev 14 function 0 not configured
- isa0 at pcib0
- isadma0 at isa0
- com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
- com0: probed fifo depth: 0 bytes
- com2: irq 5 already in use
- pckbc0 at isa0 port 0x60/5
- pckbd0 at pckbc0 (kbd slot)
- pckbc0: using irq 1 for kbd slot
- wskbd0 at pckbd0: console keyboard, using wsdisplay0
- npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
- usb2 at ohci0: USB revision 1.0
- uhub2 at usb2 "RDC OHCI root hub" rev 1.00/1.00 addr 1
- usb3 at ohci1: USB revision 1.0
- uhub3 at usb3 "RDC OHCI root hub" rev 1.00/1.00 addr 1
- uhub1: device problem, disabling port 1
- uhidev0 at uhub2 port 1 configuration 1 interface 0 "vendor 0x0430 product 0x0005" rev 1.10/2.00 addr 2
- uhidev0: iclass 3/1
- ukbd0 at uhidev0
- wskbd1 at ukbd0 mux 1
- wskbd1: connecting to wsdisplay0
- softraid0 at root
- scsibus0 at softraid0: 256 targets
- root on rd0a swap on rd0b dump on rd0b
- syncing disks...
- OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013
- deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
- cpu0: Vortex86 SoC (586-class) 934 MHz
- cpu0: FPU,TSC,CX8,MMX
- real mem = 536408064 (511MB)
- avail mem = 516653056 (492MB)
- mainbus0 at root
- bios0 at mainbus0: AT/286+ BIOS, date 06/17/11, BIOS32 rev. 0 @ 0xf0010
- apm0 at bios0: Power Management spec V1.2
- pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
- pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2fe0/240 (13 entries)
- pcibios0: no compatible PCI ICU found: ICU vendor 0x17f3 product 0x6036
- pcibios0: Warning, unable to fix up PCI interrupt routing
- pcibios0: PCI bus #0 is the last bus
- bios0: ROM list: 0xc0000/0x8000
- cpu0 at mainbus0: (uniprocessor)
- pci0 at mainbus0 bus 0: configuration mode 1 (bios)
- pchb0 at pci0 dev 0 function 0 "RDC R6021 Host" rev 0x02
- pcib0 at pci0 dev 7 function 0 vendor "RDC", unknown product 0x6036 rev 0x00
- vte0 at pci0 dev 8 function 0 "RDC R6040 Ethernet" rev 0x00: irq 7, address 00:1b:eb:35:25:04
- rdcphy0 at vte0 phy 1: R6040 10/100 PHY, rev. 1
- ohci0 at pci0 dev 10 function 0 "RDC R6060 USB" rev 0x12: irq 3, version 1.0, legacy support
- ehci0 at pci0 dev 10 function 1 "RDC R6061 USB" rev 0x03: irq 5
- usb0 at ehci0: USB revision 2.0
- uhub0 at usb0 "RDC EHCI root hub" rev 2.00/1.00 addr 1
- ohci1 at pci0 dev 11 function 0 "RDC R6060 USB" rev 0x12: irq 15, version 1.0, legacy support
- ehci1 at pci0 dev 11 function 1 "RDC R6061 USB" rev 0x03: irq 9
- usb1 at ehci1: USB revision 2.0
- uhub1 at usb1 "RDC EHCI root hub" rev 2.00/1.00 addr 1
- pciide0 at pci0 dev 12 function 0 "Intel 82801EB/ER IDE" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
- pciide0: using irq 14 for native-PCI interrupt
- wd0 at pciide0 channel 0 drive 0: <SD16G RDC SD-IDE HOST CONTROLLER>
- wd0: 1-sector PIO, LBA, 15193MB, 31116288 sectors
- wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
- pciide0: channel 1 disabled (no drives)
- vga1 at pci0 dev 13 function 0 vendor "RDC", unknown product 0x2010 rev 0x00
- wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
- wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
- azalia0 at pci0 dev 14 function 0 vendor "RDC", unknown product 0x3010 rev 0x01: irq 11
- azalia0: No codecs found
- isa0 at pcib0
- isadma0 at isa0
- com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
- com0: probed fifo depth: 0 bytes
- com2: irq 5 already in use
- pckbc0 at isa0 port 0x60/5
- pckbd0 at pckbc0 (kbd slot)
- pckbc0: using irq 1 for kbd slot
- wskbd0 at pckbd0: console keyboard, using wsdisplay0
- pcppi0 at isa0 port 0x61
- spkr0 at pcppi0
- npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
- usb2 at ohci0: USB revision 1.0
- uhub2 at usb2 "RDC OHCI root hub" rev 1.00/1.00 addr 1
- usb3 at ohci1: USB revision 1.0
- uhub3 at usb3 "RDC OHCI root hub" rev 1.00/1.00 addr 1
- uhidev0 at uhub2 port 1 configuration 1 interface 0 "Fujitsu Component Type 6 Keyboard" rev 1.10/2.00 addr 2
- uhidev0: iclass 3/1
- ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 32
- wskbd1 at ukbd0 mux 1
- wskbd1: connecting to wsdisplay0
- vscsi0 at root
- scsibus0 at vscsi0: 256 targets
- softraid0 at root
- scsibus1 at softraid0: 256 targets
- root on wd0a (057c67575b85a6ab.a) swap on wd0b dump on wd0b
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement