API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 21st, 2014
161
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 46.43 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.4.0-bricked-hammerhead-twrp-g7b77eb4 (showp1984@Unimatrix001-lnx) (gcc version 4.7.2 20120910 (prerelease) (Linaro GCC 4.7-2012.09) ) #1 SMP PREEMPT Fri Jun 6 17:29:04 CEST 2014
  4. [ 0.000000] CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] Machine: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree), model: LGE MSM 8974 HAMMERHEAD
  7. [ 0.000000] qcom,ion-heap@28 reserved EBI1 size 614000
  8. [ 0.000000] qcom,mdss_fb_primary reserved EBI1 size 1000000
  9. [ 0.000000] qcom,msm-contig-mem reserved EBI1 size 280000
  10. [ 0.000000] Node qcom,msm-mem-hole removed memory 7b00000-ff00000
  11. [ 0.000000] memory pool 3 (start 0x7e700000 size 1900000) initialized
  12. [ 0.000000] PERSIST RAM CONSOLE START ADDR : 0x10000000
  13. [ 0.000000] Initialized persistent memory from 10000000-100fffff
  14. [ 0.000000] cma: CMA: reserved 16 MiB at 36c00000
  15. [ 0.000000] cma: Found secure_region, memory base 0, size 252 MiB
  16. [ 0.000000] cma: CMA: reserved 252 MiB at 6e800000
  17. [ 0.000000] cma: Found adsp_region, memory base 0, size 32 MiB
  18. [ 0.000000] cma: CMA: reserved 32 MiB at 6c800000
  19. [ 0.000000] cma: Found qsecom_region, memory base 0, size 17 MiB
  20. [ 0.000000] cma: CMA: reserved 20 MiB at 6b400000
  21. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  22. [ 0.000000] IMEM DT static mapping successful
  23. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c272b000 s15680 r8192 d12992 u36864
  24. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 480000
  25. [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=hammerhead user_debug=31 msm_watchdog_v2.enable=1 uart_console=enable gpt=enable lge.kcal=0|0|0|x lge.rev=rev_11 androidboot.laf androidboot.emmc=true androidboot.serialno=04c7ca03251fbac4 androidboot.bootloader=HHZ12d androidboot.baseband=msm bootreason=recovery androidboot.hardware.sku=D820 androidboot.hardware.ddr=elpida androidboot.hardware.display=orise
  26. [ 0.000000] UART CONSOLE : enable
  27. [ 0.000000] BOARD : LGE rev_11
  28. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  29. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  30. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  31. [ 0.000000] Memory: 123MB 1768MB = 1891MB total
  32. [ 0.000000] Memory: 1564460k/1564460k available, 397524k reserved, 846848K highmem
  33. [ 0.000000] Virtual kernel memory layout:
  34. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  35. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  36. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  37. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  38. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  39. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  40. [ 0.000000] .text : 0xc0008000 - 0xc11528f0 (17707 kB)
  41. [ 0.000000] .init : 0xc1200000 - 0xc132ed40 (1212 kB)
  42. [ 0.000000] .data : 0xc1330000 - 0xc13f9518 ( 806 kB)
  43. [ 0.000000] .bss : 0xc13f9558 - 0xc16a573c (2737 kB)
  44. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  45. [ 0.000000] Preemptible hierarchical RCU implementation.
  46. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  47. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
  48. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  49. [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
  50. [ 0.000000] Switching to timer-based delay loop
  51. [ 0.000000] Console: colour dummy device 80x30
  52. [ 0.000081] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  53. [ 0.000101] pid_max: default: 32768 minimum: 301
  54. [ 0.000246] Security Framework initialized
  55. [ 0.000273] SELinux: Initializing.
  56. [ 0.000382] Mount-cache hash table entries: 512
  57. [ 0.001205] Initializing cgroup subsys debug
  58. [ 0.001218] Initializing cgroup subsys cpuacct
  59. [ 0.001228] Initializing cgroup subsys freezer
  60. [ 0.001270] CPU: Testing write buffer coherency: ok
  61. [ 0.001304] ftrace: allocating 27659 entries in 82 pages
  62. [ 0.098483] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  63. [ 0.099286] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  64. [ 0.102187] Setting up static identity map for 0xc78ea0 - 0xc78f28
  65. [ 0.102205] MSM Memory Dump table set up
  66. [ 0.103691] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  67. [ 0.104441] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  68. [ 0.105189] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  69. [ 0.105271] Brought up 4 CPUs
  70. [ 0.105285] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  71. [ 0.115928] dummy:
  72. [ 0.127720] NET: Registered protocol family 16
  73. [ 0.129745] DMA: preallocated 256 KiB pool for atomic coherent allocations
  74. [ 0.130711] socinfo_print: v8, id=126, ver=2.2, raw_id=1968, raw_ver=7, hw_plat=150, hw_plat_ver=65536
  75. [ 0.130717] accessory_chip=0, hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609
  76. [ 0.145011] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
  77. [ 0.160803] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
  78. [ 0.179520] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle
  79. [ 0.179991] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
  80. [ 0.180443] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
  81. [ 0.180942] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle
  82. [ 0.181400] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
  83. [ 0.181860] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  84. [ 0.182314] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  85. [ 0.182808] 8841_s3: 1050 mV normal idle
  86. [ 0.183308] 8841_s4: 815 <--> 900 mV at 0 mV normal idle
  87. [ 0.183776] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
  88. [ 0.184247] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  89. [ 0.184731] 8941_s1: 1300 mV normal idle
  90. [ 0.185232] 8941_s2: 2150 mV normal idle
  91. [ 0.185732] 8941_s3: 1800 mV normal idle
  92. [ 0.186222] 8941_l1: 1225 mV normal idle
  93. [ 0.186717] 8941_l2: 1200 mV normal idle
  94. [ 0.187202] 8941_l3: 1225 mV normal idle
  95. [ 0.187707] 8941_l4: 1225 mV normal idle
  96. [ 0.188205] 8941_l5: 1800 mV normal idle
  97. [ 0.188739] 8941_l6: 1800 mV normal idle
  98. [ 0.189231] 8941_l7: 1800 mV normal idle
  99. [ 0.189701] 8941_l8: 1800 mV normal idle
  100. [ 0.190201] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle
  101. [ 0.190692] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle
  102. [ 0.191175] 8941_l11: 1300 mV normal idle
  103. [ 0.191672] 8941_l12: 1800 mV normal idle
  104. [ 0.192127] 8941_l12_ao: 1800 mV normal idle
  105. [ 0.192626] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle
  106. [ 0.193106] 8941_l14: 1800 mV normal idle
  107. [ 0.193588] 8941_l15: 2050 mV normal idle
  108. [ 0.194085] 8941_l16: 2700 mV normal idle
  109. [ 0.194569] 8941_l17: 3000 mV normal idle
  110. [ 0.195065] 8941_l18: 2850 mV normal idle
  111. [ 0.195552] 8941_l19: 3000 <--> 3300 mV at 3300 mV normal idle
  112. [ 0.196048] 8941_l20: 2950 mV normal idle
  113. [ 0.196549] 8941_l21: 2950 mV normal idle
  114. [ 0.197031] 8941_l22: 3000 <--> 3300 mV at 3100 mV normal idle
  115. [ 0.197535] 8941_l23: 3000 mV normal idle
  116. [ 0.198014] 8941_l24: 3075 mV normal idle
  117. [ 0.198499] 8941_lvs1:
  118. [ 0.198970] 8941_lvs2:
  119. [ 0.199416] 8941_lvs3:
  120. [ 0.201438] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4
  121. [ 0.201450] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4
  122. [ 0.201778] krait0: 500 <--> 1100 mV at 900 mV fast normal idle
  123. [ 0.202312] krait1: 500 <--> 1100 mV at 900 mV fast normal idle
  124. [ 0.202834] krait2: 500 <--> 1100 mV at 900 mV fast normal idle
  125. [ 0.203352] krait3: 500 <--> 1100 mV at 900 mV fast normal idle
  126. [ 0.235854] msm_thermal_init complete.
  127. [ 0.236032] persistent_ram: found existing buffer, size 116515, start 116515
  128. [ 0.473352] console [ram-1] enabled
  129. [ 0.473612] persistent_ram: found existing buffer, size 0, start 0
  130. [ 0.473845] wifi: bcm_init_wlan_mem: WIFI MEM Allocated
  131. [ 0.473986] bcm_wifi_init_gpio_mem: wifi gpio and mem initialized
  132. [ 0.474184] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  133. [ 0.474323] hw-breakpoint: maximum watchpoint size is 8 bytes.
  134. [ 0.477734] gpiochip_add: registered GPIOs 1020 to 1023 on device: pm8841-mpp
  135. [ 0.479909] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd0 incorrect owner 4
  136. [ 0.480127] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd1 incorrect owner 4
  137. [ 0.480434] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd4 incorrect owner 4
  138. [ 0.481107] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xdb incorrect owner 2
  139. [ 0.481420] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xde incorrect owner 2
  140. [ 0.482059] gpiochip_add: registered GPIOs 984 to 1019 on device: pm8941-gpio
  141. [ 0.487427] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa2 incorrect owner 2
  142. [ 0.488019] gpiochip_add: registered GPIOs 977 to 983 on device: pm8941-mpp
  143. [ 0.489646] 8941_boost: 5000 mV
  144. [ 0.490206] 8941_mvs1:
  145. [ 0.490351] 8941_mvs1: supplied by 8941_boost
  146. [ 0.490980] 8941_mvs2:
  147. [ 0.491085] 8941_mvs2: supplied by 8941_boost
  148. [ 0.492036] earjack_debugger_probe: earjack debugger probed
  149. [ 0.495957] qpnp_adcmap_probe: Use adcmap from dt
  150. [ 0.496676] sps:BAM 0xf9984000 (va:0xf00e0000) enabled: ver:0x6, number of pipes:20
  151. [ 0.496813] sps:BAM 0xf9984000 is registered.
  152. [ 0.496897] sps:sps is ready.
  153. [ 0.498458] gdsc_venus:
  154. [ 0.498972] gdsc_mdss:
  155. [ 0.499383] gdsc_jpeg:
  156. [ 0.499818] gdsc_vfe:
  157. [ 0.500204] gdsc_oxili_gx:
  158. [ 0.500400] gdsc_oxili_gx: supplied by 8841_s4_corner
  159. [ 0.501031] gdsc_oxili_cx:
  160. [ 0.501397] gdsc_usb_hsic:
  161. [ 0.502057] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  162. [ 0.508264] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr f0400000
  163. [ 0.510104] Physical OCMEM zone layout:
  164. [ 0.510205] zone graphics : 0xfec00000 - 0xfecfffff (1024 KB)
  165. [ 0.510342] zone lp_audio : 0xfed00000 - 0xfed7ffff ( 512 KB)
  166. [ 0.510432] zone video : 0xfed00000 - 0xfed7ffff ( 512 KB)
  167. [ 0.536286] bio: create slab <bio-0> at 0
  168. [ 0.537288] ethernet_phy:
  169. [ 0.537762] avdd-3p3:
  170. [ 0.538179] vdd-1p0:
  171. [ 0.539129] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
  172. [ 0.539275] ION-heap mm: Cannot specify alignment for this type of heap
  173. [ 0.539484] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
  174. [ 0.539628] ION-heap adsp: Cannot specify alignment for this type of heap
  175. [ 0.539966] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
  176. [ 0.540363] ION heap vmalloc created
  177. [ 0.540593] ION heap kmalloc created
  178. [ 0.540689] ION heap mm created
  179. [ 0.540781] ION heap adsp created
  180. [ 0.540930] ION heap iommu created
  181. [ 0.541020] ION heap qsecom created
  182. [ 0.541131] ION heap audio created at 0x7e701000 with size 614000
  183. [ 0.542455] SCSI subsystem initialized
  184. [ 0.542695] usbcore: registered new interface driver usbfs
  185. [ 0.542914] usbcore: registered new interface driver hub
  186. [ 0.543094] usbcore: registered new device driver usb
  187. [ 0.544070] Linux media interface: v0.10
  188. [ 0.544258] Linux video capture interface: v2.00
  189. [ 0.545000] PMIC@SID0 Power-on reason: Triggered from Hard Reset
  190. [ 0.545345] input: qpnp_pon as /devices/virtual/input/input0
  191. [ 0.547656] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at f01e0000, with 3 ctx banks
  192. [ 0.548911] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at f0280000, with 3 ctx banks
  193. [ 0.550793] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at f02a0000, with 5 ctx banks
  194. [ 0.551770] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at f02c0000, with 2 ctx banks
  195. [ 0.552870] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at f02e0000, with 3 ctx banks
  196. [ 0.553970] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
  197. [ 0.554290] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
  198. [ 0.554613] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
  199. [ 0.554871] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
  200. [ 0.555186] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
  201. [ 0.555488] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
  202. [ 0.555743] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
  203. [ 0.556067] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
  204. [ 0.556369] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
  205. [ 0.556604] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
  206. [ 0.556907] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
  207. [ 0.557220] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
  208. [ 0.557526] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
  209. [ 0.557778] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
  210. [ 0.558082] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
  211. [ 0.558382] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
  212. [ 0.560415] Advanced Linux Sound Architecture Driver Version 1.0.25.
  213. [ 0.561274] Bluetooth: Core ver 2.16
  214. [ 0.561437] NET: Registered protocol family 31
  215. [ 0.561597] Bluetooth: HCI device and connection manager initialized
  216. [ 0.561691] Bluetooth: HCI socket layer initialized
  217. [ 0.561850] Bluetooth: L2CAP socket layer initialized
  218. [ 0.562268] Bluetooth: SCO socket layer initialized
  219. [ 0.562778] cfg80211: Calling CRDA to update world regulatory domain
  220. [ 0.563518] Switching to clocksource arch_sys_counter
  221. [ 0.609140] NET: Registered protocol family 2
  222. [ 0.609555] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  223. [ 0.610319] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  224. [ 0.612018] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  225. [ 0.612926] TCP: Hash tables configured (established 131072 bind 65536)
  226. [ 0.613017] TCP: reno registered
  227. [ 0.613185] UDP hash table entries: 512 (order: 2, 16384 bytes)
  228. [ 0.613322] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  229. [ 0.614020] NET: Registered protocol family 1
  230. [ 0.614484] Trying to unpack rootfs image as initramfs...
  231. [ 0.907513] Freeing initrd memory: 4164K
  232. [ 0.907741] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 0
  233. [ 0.910768] Detected 9 counters on the L2CC PMU.
  234. [ 0.912900] gpiochip_add: registered GPIOs 945 to 976 on device: smp2p
  235. [ 0.913939] gpiochip_add: registered GPIOs 913 to 944 on device: smp2p
  236. [ 0.914247] gpiochip_add: registered GPIOs 881 to 912 on device: smp2p
  237. [ 0.915244] gpiochip_add: registered GPIOs 849 to 880 on device: smp2p
  238. [ 0.915488] gpiochip_add: registered GPIOs 817 to 848 on device: slave-kernel
  239. [ 0.916502] gpiochip_add: registered GPIOs 785 to 816 on device: master-kernel
  240. [ 0.916782] gpiochip_add: registered GPIOs 753 to 784 on device: smp2p
  241. [ 0.917812] gpiochip_add: registered GPIOs 721 to 752 on device: smp2p
  242. [ 0.918124] gpiochip_add: registered GPIOs 689 to 720 on device: slave-kernel
  243. [ 0.919107] gpiochip_add: registered GPIOs 657 to 688 on device: master-kernel
  244. [ 0.919437] gpiochip_add: registered GPIOs 625 to 656 on device: smp2p
  245. [ 0.920438] gpiochip_add: registered GPIOs 593 to 624 on device: smp2p
  246. [ 0.920742] gpiochip_add: registered GPIOs 561 to 592 on device: slave-kernel
  247. [ 0.921842] gpiochip_add: registered GPIOs 529 to 560 on device: master-kernel
  248. [ 0.926260] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
  249. [ 0.930915] pil_venus fdce0000.qcom,venus: using secure boot
  250. [ 0.937025] NET: Registered protocol family 27
  251. [ 0.946331] acpuclk-8974 qcom,acpuclk.30: SPEED BIN: 1
  252. [ 0.946427] acpuclk-8974 qcom,acpuclk.30: ACPU PVS: 1
  253. [ 0.952982] acpuclk-8974 qcom,acpuclk.30: CPU Frequencies Supported: 20
  254. [ 0.959410] msm_rpm_log_probe: OK
  255. [ 0.969967] ocmem: Client sensors (id: 6) not allowed to use OCMEM
  256. [ 0.970189] OCMEM notifier registration failed
  257. [ 0.970405] sns_ocmem_main: sns_ocmem_init failed -14
  258. [ 0.973943] bluetooth_rfkill_init
  259. [ 0.974759] bluetooth_rfkill_init done
  260. [ 0.975463] bluetooth_rfkill_probe
  261. [ 0.975669] bluetooth_set_power set blocked=1
  262. [ 0.975861] Bluetooth RESET LOW!!
  263. [ 0.977184] mpm_counter: [ 0.977169]:(160088)
  264. [ 0.980264] audit: initializing netlink socket (disabled)
  265. [ 0.980522] type=2000 audit(0.890:1): initialized
  266. [ 0.983168] highmem bounce pool size: 64 pages
  267. [ 0.987811] NTFS driver 2.1.30 [Flags: R/W].
  268. [ 0.988006] fuse init (API version 7.18)
  269. [ 0.988270] msgmni has been set to 1441
  270. [ 0.989953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  271. [ 0.990029] io scheduler noop registered
  272. [ 0.990070] io scheduler deadline registered
  273. [ 0.990149] io scheduler row registered
  274. [ 0.990205] io scheduler cfq registered (default)
  275. [ 0.990247] io scheduler test-iosched registered
  276. [ 0.990400] lm3630_parse_dt: max_current =0x12 min_brightness = 0x5 max_brightness = 0xFF default_brightness = 0x20
  277. [ 0.990474] lm3630_parse_dt: boost_ctrl_reg = 0x30 bank_sel = 0 linear_map = 1 pwm_enable = 0 blmap_size = 0
  278. [ 0.990706] lm3630_probe: lm3630 probed
  279. [ 0.991190] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xf0340000
  280. [ 0.991274] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xf029e000
  281. [ 0.993286] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  282. [ 0.993382] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
  283. [ 0.993858] mdss_dsi_panel_probe: Panel Name = JDI 1080p command mode dsi panel
  284. [ 0.993933] mdss_panel_parse_dt: Panel ID = 5
  285. [ 0.994272] mdss_dsi_retrieve_ctrl_resources: dsi base=f0320800 size=600
  286. [ 0.994746] dsi_panel_device_register:1191 Continuous splash flag enabled.
  287. [ 1.024920] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
  288. [ 1.025707] mdss_hw_init: MDP Rev=10020000
  289. [ 1.031171] hdmi_tx_init_resource: 'core_physical': start = 0xf0322100, len=0x370
  290. [ 1.031399] hdmi_tx_init_resource: 'phy_physical': start = 0xf0324500, len=0x7c
  291. [ 1.031779] hdmi_tx_init_resource: 'qfprom_physical': start = 0xf0328000, len=0x60f0
  292. [ 1.035083] mdss_register_panel: adding framebuffer device fd922100.qcom,hdmi_tx
  293. [ 1.037222] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.2
  294. [ 1.037878] mdss_fb_alloc_fbmem_iommu: mdss_fb_alloc_fbmem_iommu frame buffer reserve_size=0x1000000
  295. [ 1.038157] mdss_fb_alloc_fbmem_iommu: allocating 16777216 bytes at f1000000 (7ee00000 phys) for fb 0
  296. [ 1.038306] mdss_fb_register: FrameBuffer[0] 1080x1920 size=16777216 registered successfully!
  297. [ 1.038614] mdss_fb_register: FrameBuffer[1] 640x480 size=0 registered successfully!
  298. [ 1.038919] mdss_fb_register: FrameBuffer[2] 1920x1080 size=0 registered successfully!
  299. [ 1.039675] sps: BAM device 0xf9944000 is not registered yet.
  300. [ 1.039728] sps:BAM 0xf9944000 is registered.
  301. [ 1.039804] msm_serial_hs: BAM device registered. bam_handle=0x0
  302. [ 1.039968] avdd-3p3: Failed to create debugfs directory
  303. [ 1.040509] anx7808 anx7808_vdd_1p0_power: vdd 1.0V is already off
  304. [ 1.043629] f9960000.uart: ttyHS99 at MMIO 0xf9960000 (irq = 148) is a MSM HS UART
  305. [ 1.045820] msm_serial_hs module loaded
  306. [ 1.046129] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
  307. [ 1.046317] f991d000.serial: ttyHSL0 at MMIO 0xf991d000 (irq = 139) is a MSM
  308. [ 1.048070] msm_hsl_console_setup: console setup on port #0
  309. [ 1.048258] console [ttyHSL0] enabled
  310. [ 1.048535] msm_serial_hsl_init: driver initialized
  311. [ 1.053599] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  312. [ 1.066897] brd: module loaded
  313. [ 1.068590] loop: module loaded
  314. [ 1.068703] i2c-core: driver [isa1200] using legacy suspend method
  315. [ 1.068744] i2c-core: driver [isa1200] using legacy resume method
  316. [ 1.069203] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
  317. [ 1.069250] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  318. [ 1.069356] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
  319. [ 1.069461] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
  320. [ 1.070104] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  321. [ 1.070183] i2c-core: driver [tabla-i2c-core] using legacy resume method
  322. [ 1.070320] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  323. [ 1.070392] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  324. [ 1.070703] SCSI Media Changer driver v0.25
  325. [ 1.071250] spi_qsd f9966000.spi: master is unqueued, this is deprecated
  326. [ 1.073095] rmnet_init: BAM devices[8]
  327. [ 1.073708] vdd-1p0: Failed to create debugfs directory
  328. [ 1.087522] PPP generic driver version 2.4.2
  329. [ 1.087627] PPP BSD Compression module registered
  330. [ 1.087702] PPP Deflate Compression module registered
  331. [ 1.089095] PPP MPPE Compression module registered
  332. [ 1.089171] NET: Registered protocol family 24
  333. [ 1.089229] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  334. [ 1.089304] CSLIP: code copyright 1989 Regents of the University of California.
  335. [ 1.089424] usbcore: registered new interface driver catc
  336. [ 1.089489] usbcore: registered new interface driver kaweth
  337. [ 1.089563] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  338. [ 1.089627] usbcore: registered new interface driver pegasus
  339. [ 1.089730] usbcore: registered new interface driver rtl8150
  340. [ 1.089773] hso: drivers/net/usb/hso.c: Option Wireless
  341. [ 1.089884] usbcore: registered new interface driver hso
  342. [ 1.089952] usbcore: registered new interface driver asix
  343. [ 1.090049] usbcore: registered new interface driver cdc_ether
  344. [ 1.090114] usbcore: registered new interface driver cdc_eem
  345. [ 1.090213] usbcore: registered new interface driver dm9601
  346. [ 1.090286] usbcore: registered new interface driver smsc75xx
  347. [ 1.090390] usbcore: registered new interface driver smsc95xx
  348. [ 1.090455] usbcore: registered new interface driver gl620a
  349. [ 1.090553] usbcore: registered new interface driver net1080
  350. [ 1.090618] usbcore: registered new interface driver plusb
  351. [ 1.090722] usbcore: registered new interface driver rndis_host
  352. [ 1.090788] usbcore: registered new interface driver cdc_subset
  353. [ 1.090885] usbcore: registered new interface driver zaurus
  354. [ 1.090953] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  355. [ 1.091106] usbcore: registered new interface driver int51x1
  356. [ 1.091171] usbcore: registered new interface driver kalmia
  357. [ 1.091269] usbcore: registered new interface driver ipheth
  358. [ 1.091338] usbcore: registered new interface driver sierra_net
  359. [ 1.091435] usbcore: registered new interface driver cx82310_eth
  360. [ 1.091500] usbcore: registered new interface driver cdc_ncm
  361. [ 1.091599] usbcore: registered new interface driver qmi_wwan
  362. [ 1.093723] anx7808 sp_tx_hardware_poweron: anx7808 power on
  363. [ 1.095285] anx7808 sp_tx_chip_located: ANX7808 BA is found.
  364. [ 1.097185] anx7808 sp_tx_vbus_powerdown: 3.3V output disabled
  365. [ 1.133338] msm-dwc3 msm_dwc3: Read platform data for adc low threshold
  366. [ 1.133561] msm-dwc3 msm_dwc3: Read platform data for adc high threshold
  367. [ 1.153799] anx7808 sp_tx_hardware_powerdown: anx7808 power down
  368. [ 1.154142] anx7808 sp_tx_set_sys_state: SP_TX To System State:
  369. [ 1.154335] anx7808 sp_tx_set_sys_state: STATE_CABLE_PLUG
  370. [ 1.213735] bcm2079x 0-0077: requesting IRQ 360
  371. [ 1.213852] bcm2079x 0-0077: bcm2079x_probe, probing bcm2079x driver exited successfully
  372. [ 1.349122] usbcore: registered new interface driver cdc_acm
  373. [ 1.349168] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  374. [ 1.349274] usbcore: registered new interface driver usblp
  375. [ 1.349341] usbcore: registered new interface driver cdc_wdm
  376. [ 1.349416] Initializing USB Mass Storage driver...
  377. [ 1.349489] usbcore: registered new interface driver usb-storage
  378. [ 1.349562] USB Mass Storage support registered.
  379. [ 1.349623] usbcore: registered new interface driver ums-alauda
  380. [ 1.349720] usbcore: registered new interface driver ums-cypress
  381. [ 1.349783] usbcore: registered new interface driver ums-datafab
  382. [ 1.349880] usbcore: registered new interface driver ums_eneub6250
  383. [ 1.349943] usbcore: registered new interface driver ums-freecom
  384. [ 1.350037] usbcore: registered new interface driver ums-isd200
  385. [ 1.350100] usbcore: registered new interface driver ums-jumpshot
  386. [ 1.350194] usbcore: registered new interface driver ums-karma
  387. [ 1.350289] usbcore: registered new interface driver ums-onetouch
  388. [ 1.350352] usbcore: registered new interface driver ums-sddr09
  389. [ 1.350447] usbcore: registered new interface driver ums-sddr55
  390. [ 1.350510] usbcore: registered new interface driver ums-usbat
  391. [ 1.350612] usbcore: registered new interface driver trancevibrator
  392. [ 1.350974] mbim_init: initialize 1 instances
  393. [ 1.351090] mbim_init: Initialized 1 ports
  394. [ 1.352167] rndis_qc_init: initialize rndis QC instance
  395. [ 1.352424] gadget: Mass Storage Function, version: 2009/09/11
  396. [ 1.352498] gadget: Number of LUNs=1
  397. [ 1.352539] lun0: LUN: removable file: (no medium)
  398. [ 1.352764] gadget: android_usb ready
  399. [ 1.353429] [Touch] touch on
  400. [ 1.354105] input: touch_dev as /devices/virtual/input/input1
  401. [ 1.358728] [Touch] TYPE = 1 product id[PLG218] : syna product id[]
  402. [ 1.358769] [Touch] IC identifier[PLG218 - 1] fw_version[E079]
  403. [ 1.358841] [Touch] image_version[E061] : force[0]
  404. [ 1.359713] [Touch] FW-upgrade is not executed
  405. [ 1.360397] using rtc device, qpnp_rtc, for alarms
  406. [ 1.360452] qcom,qpnp-rtc qpnp-rtc-ee19fc00: rtc core: registered qpnp_rtc as rtc0
  407. [ 1.360667] i2c /dev entries driver
  408. [ 1.361577] ocmem: Notifier registered for 1
  409. [ 1.362986] msm_cci_probe: pdev ee149e00 device id = -1
  410. [ 1.374906] imx179_init_module:158
  411. [ 1.684053] __msm_jpeg_init:910] Jpeg Device id 0
  412. [ 1.684924] __msm_jpeg_init:910] Jpeg Device id 1
  413. [ 1.685766] __msm_jpeg_init:910] Jpeg Device id 2
  414. [ 1.696808] lirc_dev: IR Remote Control driver registered, major 240
  415. [ 1.697353] IR NEC protocol handler initialized
  416. [ 1.697551] IR RC5(x) protocol handler initialized
  417. [ 1.697904] IR RC6 protocol handler initialized
  418. [ 1.698099] IR JVC protocol handler initialized
  419. [ 1.698444] IR Sony protocol handler initialized
  420. [ 1.698636] IR RC5 (streamzap) protocol handler initialized
  421. [ 1.698834] IR SANYO protocol handler initialized
  422. [ 1.699182] IR MCE Keyboard/mouse protocol handler initialized
  423. [ 1.699381] IR LIRC bridge handler initialized
  424. [ 1.699945] usbcore: registered new interface driver uvcvideo
  425. [ 1.700142] USB Video Class driver (1.1.1)
  426. [ 1.700901] qpnp_charger_read_dt_props: tm not ready -517
  427. [ 1.701129] spmi qpnp-charger-ee19f600: Driver qcom,qpnp-charger requests probe deferral
  428. [ 1.701701] max17048_probe: start
  429. [ 1.701898] ac supply not found deferring probe
  430. [ 1.702268] i2c 84-0036: Driver max17048 requests probe deferral
  431. [ 1.703310] bq51013b_probe: start
  432. [ 1.703836] bq51013b_parse_dt: current_ma = 704
  433. [ 1.712730] bq24192_get_soc_from_batt_psy: battery power supply is not registered yet
  434. [ 1.713626] bq24192_get_prop_input_voltage: Unable to read vbus rc=-517
  435. [ 1.714518] bq24192_get_soc_from_batt_psy: battery power supply is not registered yet
  436. [ 1.715886] bq24192_get_prop_input_voltage: Unable to read vbus rc=-517
  437. [ 1.717554] bq24192_probe: probe success
  438. [ 1.781954] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  439. [ 1.782485] Bluetooth: BlueSleep Mode Driver Ver 1.1
  440. [ 1.783877] Bluetooth: bt_host_wake 42, bt_ext_wake 62
  441. [ 1.784102] Bluetooth: host_wake_irq 312, polarity 0
  442. [ 1.786823] cpuidle: using governor ladder
  443. [ 1.788640] cpuidle: using governor menu
  444. [ 1.788929] sdhci: Secure Digital Host Controller Interface driver
  445. [ 1.789275] sdhci: Copyright(c) Pierre Ossman
  446. [ 1.790387] mmc0: SDCC Version: 0x00000038
  447. [ 1.793915] mmc0: bam physical base=0xf9884000
  448. [ 1.794112] mmc0: bam virtual base=0xf03b8000
  449. [ 1.794464] sps:BAM 0xf9884000 is registered.
  450. [ 1.794655] mmc0: BAM device registered. bam_handle=0xed69d600
  451. [ 1.796223] sps:BAM 0xf9884000 (va:0xf03b8000) enabled: ver:0x6, number of pipes:6
  452. [ 1.797744] mmc0: Qualcomm MSM SDCC-BAM at [mem 0xf9884000-0xf988afff flags 0x200] [irq 252 flags 0x400]
  453. [ 1.798167] mmc0: Qualcomm MSM SDCC-DML [mem 0xf98a4800-0xf98a48ff flags 0x200]
  454. [ 1.798584] mmc0: id 2, nonremovable 0
  455. [ 1.798773] wcf_status: wifi_detect = 0
  456. [ 1.798956] wcf_status_register
  457. [ 1.802896] mmc0: Qualcomm MSM SDCC-core [mem 0xf98a4000-0xf98a47ff flags 0x200] [irq 157 flags 0x400],0 dma -1 dmacrcri -1
  458. [ 1.803255] mmc0: Controller capabilities: 0x00003ffe
  459. [ 1.803566] mmc0: 8 bit data mode disabled
  460. [ 1.804076] mmc0: 4 bit data mode enabled
  461. [ 1.804147] mmc0: polling status mode disabled
  462. [ 1.804186] mmc0: MMC clock 400000 -> 200000000 Hz, PCLK 0 Hz
  463. [ 1.804257] mmc0: Slot eject status = 1
  464. [ 1.804296] mmc0: Power save feature enable = 1
  465. [ 1.804335] mmc0: SPS-BAM data transfer mode available
  466. [ 1.804698] sdhci-pltfm: SDHCI platform and OF driver helper
  467. [ 1.808959] mmc1: no vmmc regulator found
  468. [ 1.812067] mmc1: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
  469. [ 1.817039] qcom,leds-qpnp leds-qpnp-ee150e00: Regulator get failed(-517)
  470. [ 1.817387] qcom,leds-qpnp leds-qpnp-ee150e00: Unable to read flash config data
  471. [ 1.817615] spmi leds-qpnp-ee150e00: Driver qcom,leds-qpnp requests probe deferral
  472. [ 1.824551] usbcore: registered new interface driver usbhid
  473. [ 1.824626] usbhid: USB HID core driver
  474. [ 1.824932] ashmem: initialized
  475. [ 1.825014] logger: created 256K log 'log_main'
  476. [ 1.825127] logger: created 256K log 'log_events'
  477. [ 1.825208] logger: created 256K log 'log_radio'
  478. [ 1.825291] logger: created 256K log 'log_system'
  479. [ 1.825802] sps:BAM 0xf9304000 is registered.
  480. [ 1.825855] sps:BAM 0xf9a44000 is registered.
  481. [ 1.825961] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
  482. [ 1.826334] qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm
  483. [ 1.826514] PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
  484. [ 1.826627] PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
  485. [ 1.826875] usbcore: registered new interface driver snd-usb-audio
  486. [ 1.839353] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
  487. [ 1.839891] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  488. [ 1.840576] platform qcom,msm-voip-dsp.39: Driver msm-voip-dsp requests probe deferral
  489. [ 1.840925] platform qcom,msm-pcm-voice.40: Driver msm-pcm-voice requests probe deferral
  490. [ 1.842711] ocmem: Notifier registered for 5
  491. [ 1.843229] msm8974-asoc-taiko sound.29: msm8974_asoc_machine_probe(): hdmi audio support present
  492. [ 1.843275] msm8974-asoc-taiko sound.29: property qcom,us-euro-gpios not detected in node /soc/sound
  493. [ 1.843442] msm8974-asoc-taiko sound.29: msm8974_asoc_machine_probe() MBHC disabled = 1
  494. [ 1.844264] u32 classifier
  495. [ 1.844306] Actions configured
  496. [ 1.844350] Netfilter messages via NETLINK v0.30.
  497. [ 1.844464] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  498. [ 1.844759] ctnetlink v0.93: registering with nfnetlink.
  499. [ 1.844923] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  500. [ 1.844964] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  501. [ 1.845218] xt_time: kernel timezone is -0000
  502. [ 1.845441] ip_tables: (C) 2000-2006 Netfilter Core Team
  503. [ 1.845655] arp_tables: (C) 2002 David S. Miller
  504. [ 1.845728] TCP: cubic registered
  505. [ 1.845769] Initializing XFRM netlink socket
  506. [ 1.846074] NET: Registered protocol family 10
  507. [ 1.847353] Mobile IPv6
  508. [ 1.847412] ip6_tables: (C) 2000-2006 Netfilter Core Team
  509. [ 1.847579] IPv6 over IPv4 tunneling driver
  510. [ 1.847907] NET: Registered protocol family 17
  511. [ 1.847998] NET: Registered protocol family 15
  512. [ 1.848078] Bridge firewalling registered
  513. [ 1.848128] Ebtables v2.0 registered
  514. [ 1.848329] Bluetooth: RFCOMM TTY layer initialized
  515. [ 1.848382] Bluetooth: RFCOMM socket layer initialized
  516. [ 1.848455] Bluetooth: RFCOMM ver 1.11
  517. [ 1.848495] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  518. [ 1.848535] Bluetooth: BNEP filters: protocol multicast
  519. [ 1.848609] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  520. [ 1.848694] L2TP core driver, V2.0
  521. [ 1.848776] PPPoL2TP kernel driver, V2.0
  522. [ 1.848947] Registering SWP/SWPB emulation handler
  523. [ 1.848989] clock_late_init: Removing enables held for handed-off clocks
  524. [ 1.857192] [MPDEC]: msm_mpdec_init init complete.
  525. [ 1.857587] gdsc_oxili_gx: disabling
  526. [ 1.857731] gdsc_venus: disabling
  527. [ 1.858290] boost_gpio_probe
  528. [ 1.858608] qcom,leds-qpnp leds-qpnp-ee150e00: Regulator get failed(-517)
  529. [ 1.858683] qcom,leds-qpnp leds-qpnp-ee150e00: Unable to read flash config data
  530. [ 1.858763] spmi leds-qpnp-ee150e00: Driver qcom,leds-qpnp requests probe deferral
  531. [ 1.858835] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  532. [ 1.858847] max17048_probe: start
  533. [ 1.858876] max17048_parse_dt: rcomp = 77 rcomp_co_hot = 700 rcomp_co_cold = 5225
  534. [ 1.858880] max17048_parse_dt: alert_thres = 2 full_soc = 970 empty_soc = 10
  535. [ 1.859416] max17048 84-0036: MAX17048 Fuel-Gauge Ver 0x12
  536. [ 1.859610] bq24192_get_soc_from_batt_psy: battery power supply is not registered yet
  537. [ 1.860366] input: gpio-keys as /devices/gpio_keys.70/input/input2
  538. [ 1.860836] qcom,qpnp-rtc qpnp-rtc-ee19fc00: setting system clock to 1971-01-02 23:05:59 UTC (31705559)
  539. [ 1.861128] batt_tm_psy_init: battery supply not found
  540. [ 1.861168] batt_tm_ctrl_probe: failed to init psy
  541. [ 1.861311] platform battery_tm_ctrl.78: Driver batt_tm_ctrl requests probe deferral
  542. [ 1.861886] msm8974_pwm_vibrator_probe: probed
  543. [ 1.874235] max1462x_hsd_probe: acc_read_value - 14463
  544. [ 1.874360] input: hs_detect as /devices/virtual/input/input3
  545. [ 1.874616] ALSA device list:
  546. [ 1.874659] No soundcards found.
  547. [ 1.874895] Freeing init memory: 184K
  548. [ 1.896148] max17048_probe: done
  549. [ 1.896398] 8941_smbb_boost: 5000 mV
  550. [ 1.896674] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 0 batt_present = 0
  551. [ 1.896976] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  552. [ 1.898758] batt_tm_ctrl_probe: probe success
  553. [ 1.899082] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  554. [ 1.917676] max17048_set_rcomp: new RCOMP = 0x46
  555. [ 1.921654] max17048_work: raw soc = 0x9EF2 raw vcell = 0x0CB3
  556. [ 1.921751] max17048_work: SOC = 81 vbatt_mv = 4063
  557. [ 1.921795] max17048_work: ibatt_ua = -228581 batt_temp = 303
  558. [ 1.935934] mmc1: BKOPS_EN bit = 0
  559. [ 1.947804] mmc1: new HS200 MMC card at address 0001
  560. [ 1.948627] mmcblk0: mmc1:0001 SEM32G 29.1 GiB
  561. [ 1.949468] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
  562. [ 1.953315] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
  563. [ 1.965103] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
  564. [ 1.985877] type=1403 audit(31705559.620:2): policy loaded auid=4294967295 ses=4294967295
  565. [ 1.986070] SELinux: Loaded policy from /sepolicy
  566. [ 1.987779] type=1404 audit(31705559.620:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  567. [ 3.072708] msm-dwc3 msm_dwc3: DWC3 in low power mode
  568. [ 3.431542] healthd: wakealarm_init: timerfd_create failed
  569. [ 3.714422] init: cannot open '/initlogo.rle'
  570. [ 3.724365] bq24192_irq_worker: power source changed! ext_pwr = 1 wlc_pwr = 0
  571. [ 3.725383] android_usb: already disabled
  572. [ 3.736082] bq24192_irq_worker: notify vbus to usb otg ext_pwr = 1
  573. [ 3.737823] max17048_external_power_changed: power supply changed state = 1 health = 1
  574. [ 3.747229] init: Unable to open persistent property directory /data/property errno: 2
  575. [ 3.757485] healthd: wakealarm_init: timerfd_create failed
  576. [ 3.768782] type=1404 audit(31705561.400:4): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295
  577. [ 3.771822] adb_open
  578. [ 3.772098] adb_bind_config
  579. [ 3.786146] mdss_dsi_cont_splash_on:685 DSI on for continuous splash.
  580. [ 3.800181] mdss_dsi_on:485 Panel already on.
  581. [ 3.943077] msm-dwc3 msm_dwc3: DWC3 exited from low power mode
  582. [ 4.036141] EXT4-fs (mmcblk0p28): 1 orphan inode deleted
  583. [ 4.036187] EXT4-fs (mmcblk0p28): recovery complete
  584. [ 4.053036] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts:
  585. [ 4.083988] dwc3 f9200000.dwc3: Avail curr from USB = 500
  586. [ 4.084379] dotg->charger->max_power = 0 ma = 500
  587. [ 4.084711] [Touch] CHARGER = 1
  588. [ 4.086107] bq24192_set_input_i_limit: input current limit = 500 setting 0x02
  589. [ 4.087346] bq24192_set_ibat_max: req_ibat = 1500 set_ibat = 1472 reg_val = 0x3c
  590. [ 4.088624] bq24192_external_power_changed: usb is online! i_limit = 500 v_limit = 4600
  591. [ 4.091305] SELinux: Context u:object_r:media_rw_data_file:s0 is not valid (left unmapped).
  592. [ 4.096445] dwc3 f9200000.dwc3: request ed549d80 was not queued to ep0out
  593. [ 4.096503] adb_release
  594. [ 4.103649] adb_bind_config
  595. [ 4.129635] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts:
  596. [ 4.174156] dwc3 f9200000.dwc3: request ed549d80 was not queued to ep0out
  597. [ 4.182234] adb_bind_config
  598. [ 4.198278] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts:
  599. [ 4.256949] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts:
  600. [ 4.281311] android_work: did not send uevent (0 0 (null))
  601. [ 4.286196] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
  602. [ 4.457705] android_work: did not send uevent (0 0 (null))
  603. [ 4.531069] android_work: sent uevent USB_STATE=CONNECTED
  604. [ 4.532139] android_usb gadget: high-speed config #1: fe8050c8.android_usb
  605. [ 4.552653] SELinux: Context u:object_r:adb_keys_file:s0 is not valid (left unmapped).
  606. [ 4.554052] SELinux: Context u:object_r:auditd_log:s0 is not valid (left unmapped).
  607. [ 4.555645] SELinux: Context u:object_r:keychain_data_file:s0 is not valid (left unmapped).
  608. [ 4.556513] SELinux: Context u:object_r:net_data_file:s0 is not valid (left unmapped).
  609. [ 4.557598] SELinux: Context u:object_r:zoneinfo_data_file:s0 is not valid (left unmapped).
  610. [ 4.559392] SELinux: Context u:object_r:shared_relro_file:s0 is not valid (left unmapped).
  611. [ 4.563367] SELinux: Context u:object_r:misc_user_data_file:s0 is not valid (left unmapped).
  612. [ 4.564093] SELinux: Context u:object_r:media_data_file:s0 is not valid (left unmapped).
  613. [ 4.564468] SELinux: Context u:object_r:audio_data_file:s0 is not valid (left unmapped).
  614. [ 4.564909] SELinux: Context u:object_r:sensors_data_file:s0 is not valid (left unmapped).
  615. [ 4.583930] android_work: sent uevent USB_STATE=CONFIGURED
  616. [ 4.604525] SELinux: Context u:object_r:system_app_data_file:s0 is not valid (left unmapped).
  617. [ 5.562138] SELinux: Context u:object_r:property_data_file:s0 is not valid (left unmapped).
  618. [ 5.567442] SELinux: Context u:object_r:resourcecache_data_file:s0 is not valid (left unmapped).
  619. [ 5.596444] SELinux: Context u:object_r:time_data_file:s0 is not valid (left unmapped).
  620. [ 5.662414] SELinux: Context u:object_r:system_ndebug_socket:s0 is not valid (left unmapped).
  621. [ 5.664881] SELinux: Context u:object_r:ramdump_data_file:s0 is not valid (left unmapped).
  622. [ 5.666519] SELinux: Context u:object_r:diag_logs:s0 is not valid (left unmapped).
  623. [ 5.671371] SELinux: Context u:object_r:camera_data_file:s0 is not valid (left unmapped).
  624. [ 5.671485] SELinux: Context u:object_r:install_data_file:s0 is not valid (left unmapped).
  625. [ 5.677650] SELinux: Context u:object_r:dalvikcache_profiles_data_file:s0 is not valid (left unmapped).
  626. [ 5.690643] SELinux: Context u:object_r:camera_socket:s0 is not valid (left unmapped).
  627. [ 5.702373] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts:
  628. [ 5.702846] SELinux: Context u:object_r:persist_file:s0 is not valid (left unmapped).
  629. [ 5.733874] bq24192_set_input_i_limit: input current limit = 500 setting 0x02
  630. [ 20.448827] [MPDEC]: CPU[3] on->off | Mask=[1110] | time online: 20365
  631. [ 20.712668] [MPDEC]: CPU[2] on->off | Mask=[1100] | time online: 20628
  632. [ 21.362014] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 21278
  633. [ 31.107892] [MPDEC]: CPU[1] off->on | Mask=[1100]
  634. [ 31.626610] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 518
  635. [ 32.000134] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts:
  636. [ 32.093845] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
  637. [ 32.144731] [MPDEC]: CPU[1] off->on | Mask=[1100]
  638. [ 32.312466] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts:
  639. [ 32.671010] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 526
  640. [ 49.307881] [MPDEC]: CPU[1] off->on | Mask=[1100]
  641. [ 49.458818] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
  642. [ 49.962483] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 654
  643. [ 90.522181] [MPDEC]: CPU[1] off->on | Mask=[1100]
  644. [ 96.372189] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 5850
  645. [ 109.631899] [MPDEC]: CPU[1] off->on | Mask=[1100]
  646. [ 109.735846] lm3630_backlight_off
  647. [ 109.959856] mdss_dsi_panel_off:
  648. [ 109.983959] [Touch] touch off
  649. [ 110.015876] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 384
  650. [ 110.016350] [MPDEC]: Screen -> off. Deactivated mpdecision.
  651. [ 120.038383] max17048_set_rcomp: new RCOMP = 0x45
  652. [ 120.044082] max17048_work: raw soc = 0x9F32 raw vcell = 0x0CE6
  653. [ 120.044326] max17048_work: SOC = 81 vbatt_mv = 4127
  654. [ 120.044788] max17048_work: ibatt_ua = -398260 batt_temp = 311
  655. [ 233.456370] max17048_set_rcomp: new RCOMP = 0x46
  656. [ 233.461997] max17048_work: raw soc = 0xA030 raw vcell = 0x0CF2
  657. [ 233.462246] max17048_work: SOC = 82 vbatt_mv = 4142
  658. [ 233.462668] max17048_work: ibatt_ua = -357430 batt_temp = 309
  659. [ 293.293499] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: max_batch_time=0,commit=1,data=ordered,barrier=1,errors=panic,nodelalloc
  660. [ 325.291743] SELinux: Context u:object_r:logd_exec:s0 is not valid (left unmapped).
  661. [ 325.331720] SELinux: Context u:object_r:bluetooth_loader_exec:s0 is not valid (left unmapped).
  662. [ 325.374923] SELinux: Context u:object_r:bootanim_exec:s0 is not valid (left unmapped).
  663. [ 325.397770] SELinux: Context u:object_r:bridge_exec:s0 is not valid (left unmapped).
  664. [ 325.488841] SELinux: Context u:object_r:dex2oat_exec:s0 is not valid (left unmapped).
  665. [ 325.694397] SELinux: Context u:object_r:dumpstate_exec:s0 is not valid (left unmapped).
  666. [ 326.630468] SELinux: Context u:object_r:irsc_util_exec:s0 is not valid (left unmapped).
  667. [ 326.746032] SELinux: Context u:object_r:lmkd_exec:s0 is not valid (left unmapped).
  668. [ 326.813451] SELinux: Context u:object_r:mdnsd_exec:s0 is not valid (left unmapped).
  669. [ 327.167768] SELinux: Context u:object_r:camera_exec:s0 is not valid (left unmapped).
  670. [ 327.245765] SELinux: Context u:object_r:mpdecision_exec:s0 is not valid (left unmapped).
  671. [ 327.355088] SELinux: Context u:object_r:netmgrd_exec:s0 is not valid (left unmapped).
  672. [ 327.840944] SELinux: Context u:object_r:qmux_exec:s0 is not valid (left unmapped).
  673. [ 328.039206] SELinux: Context u:object_r:rmt_exec:s0 is not valid (left unmapped).
  674. [ 328.150280] SELinux: Context u:object_r:sensors_exec:s0 is not valid (left unmapped).
  675. [ 328.408235] SELinux: Context u:object_r:ssr_exec:s0 is not valid (left unmapped).
  676. [ 328.438817] SELinux: Context u:object_r:sysinit_exec:s0 is not valid (left unmapped).
  677. [ 328.486688] SELinux: Context u:object_r:thermald_exec:s0 is not valid (left unmapped).
  678. [ 328.616645] SELinux: Context u:object_r:time_exec:s0 is not valid (left unmapped).
  679. [ 328.784850] SELinux: Context u:object_r:uncrypt_exec:s0 is not valid (left unmapped).
  680. [ 328.833252] SELinux: Context u:object_r:vdc_exec:s0 is not valid (left unmapped).
  681. [ 337.227777] max17048_set_rcomp: new RCOMP = 0x46
  682. [ 337.232904] max17048_work: raw soc = 0xA12E raw vcell = 0x0CFA
  683. [ 337.233192] max17048_work: SOC = 82 vbatt_mv = 4152
  684. [ 337.233434] max17048_work: ibatt_ua = -431839 batt_temp = 307
  685. [ 433.375363] max17048_set_rcomp: new RCOMP = 0x46
  686. [ 433.380776] max17048_work: raw soc = 0xA22C raw vcell = 0x0CFF
  687. [ 433.381216] max17048_work: SOC = 83 vbatt_mv = 4158
  688. [ 433.381456] max17048_work: ibatt_ua = -431170 batt_temp = 304
  689. [ 451.289843] SELinux: Context u:object_r:vss_exec:s0 is not valid (left unmapped).
  690. [ 479.479102] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
  691. [ 479.634803] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts:
  692. [ 479.694438] [Touch] touch on
  693. [ 479.697324] [MPDEC]: Screen -> on. Activated mpdecision. | Mask=[1000]
  694. [ 479.901838] mdss_dsi_panel_on
  695. [ 479.939026] lm3630_backlight_on
  696. [ 499.166329] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: (null)
  697. [ 499.194993] [MPDEC]: CPU[1] off->on | Mask=[1100]
  698. [ 508.431384] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 9236
  699. [ 509.884953] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
  700. [ 510.115492] [MPDEC]: CPU[1] off->on | Mask=[1100]
  701. [ 510.122778] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts:
  702. [ 510.640610] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 525
  703. [ 552.550375] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
  704. [ 552.624663] [MPDEC]: CPU[1] off->on | Mask=[1100]
  705. [ 552.678530] mdss_fb_release: try to close unopened fb 2!
  706. [ 552.678902] mdss_fb_release: try to close unopened fb 1!
  707. [ 552.750043] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 125
  708. [ 552.750153] [MPDEC]: Screen -> off. Deactivated mpdecision.
  709. [ 552.906900] mdss_dsi_panel_off:
  710. [ 552.931404] [Touch] touch off
  711. [ 552.967433] Restarting system.
  712. [ 552.967673] Going down for restart now
  713. [ 552.969304] Calling SCM to disable SPMI PMIC arbiter
  714.  
  715. No errors detected
  716. Boot info:
  717. Last boot reason: reboot
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!