Advertisement
Guest User

dmesg

a guest
Oct 10th, 2015
84
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.70 KB | None | 0 0
  1. KDB: debugger backends: ddb
  2. KDB: current backend: ddb
  3. Copyright (c) 1992-2015 The FreeBSD Project.
  4. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  5. The Regents of the University of California. All rights reserved.
  6. FreeBSD is a registered trademark of The FreeBSD Foundation.
  7. FreeBSD 11.0-CURRENT #1 r289115: Sat Oct 10 17:59:31 CEST 2015
  8. root@DESKTOP1:/usr/obj/mips_ap/mips.mips/usr/srcmips/sys/TP-WN1043ND_64_RAM mips
  9. gcc version 4.2.1 20070831 patched [FreeBSD]
  10. Preloaded elf kernel "kernel" at 0x804c5450.
  11. real memory = 67108864 (65536K bytes)
  12. Physical memory chunk(s):
  13. 0x00560000 - 0x03eb6fff, 60125184 bytes (14679 pages)
  14. avail memory = 59494400 (56MB)
  15. random: entropy device external interface
  16. wlan: <802.11 Link Layer>
  17. mem: <memory>
  18. null: <full device, null device, zero device>
  19. nexus0: <MIPS32 root nexus>
  20. clock0: <Generic MIPS32 ticker> on nexus0
  21. Timecounter "MIPS32" frequency 200000000 Hz quality 800
  22. Event timer "MIPS32" frequency 200000000 Hz quality 800
  23. random: harvesting attach, 8 bytes (4 bits) from clock0
  24. apb0 at irq 4 on nexus0
  25. uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0
  26. uart0: console (115200,n,8,1)
  27. uart0: fast interrupt
  28. uart0: PPS capture mode 2 (DCD)
  29. random: harvesting attach, 8 bytes (4 bits) from uart0
  30. gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0
  31. gpio0: [GIANT-LOCKED]
  32. gpio0: function_set: 0x2000
  33. gpio0: function_clear: 0x0
  34. gpio0: gpio pinmask=0x1c02ae
  35. gpiobus0: <GPIO bus> on gpio0
  36. gpioled1: <GPIO led> at pin 2 on gpiobus0
  37. random: harvesting attach, 8 bytes (4 bits) from gpioled1
  38. gpioled2: <GPIO led> at pin 5 on gpiobus0
  39. random: harvesting attach, 8 bytes (4 bits) from gpioled2
  40. gpioled3: <GPIO led> at pin 9 on gpiobus0
  41. random: harvesting attach, 8 bytes (4 bits) from gpioled3
  42. gpioiic0: <GPIO I2C bit-banging driver> at pins 18-19 on gpiobus0
  43. gpioiic0: SCL pin: 19, SDA pin: 18
  44. iicbb0: <I2C bit-banging driver> on gpioiic0
  45. iicbus0: <Philips I2C bus> on iicbb0 master-only
  46. rtl8366rb0: <RTL8366RB Ethernet Switch Controller> at addr 0xa8 on iicbus0
  47. rtl8366rb0: rev. 3
  48. miibus0: <MII bus> on rtl8366rb0
  49. ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
  50. ukphy0: OUI 0x00e04c, model 0x0016, rev. 1
  51. ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
  52. random: harvesting attach, 8 bytes (4 bits) from ukphy0
  53. random: harvesting attach, 8 bytes (4 bits) from miibus0
  54. miibus1: <MII bus> on rtl8366rb0
  55. ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
  56. ukphy1: OUI 0x00e04c, model 0x0016, rev. 1
  57. ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
  58. random: harvesting attach, 8 bytes (4 bits) from ukphy1
  59. random: harvesting attach, 8 bytes (4 bits) from miibus1
  60. miibus2: <MII bus> on rtl8366rb0
  61. ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
  62. ukphy2: OUI 0x00e04c, model 0x0016, rev. 1
  63. ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
  64. random: harvesting attach, 8 bytes (4 bits) from ukphy2
  65. random: harvesting attach, 8 bytes (4 bits) from miibus2
  66. miibus3: <MII bus> on rtl8366rb0
  67. ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
  68. ukphy3: OUI 0x00e04c, model 0x0016, rev. 1
  69. ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
  70. random: harvesting attach, 8 bytes (4 bits) from ukphy3
  71. random: harvesting attach, 8 bytes (4 bits) from miibus3
  72. miibus4: <MII bus> on rtl8366rb0
  73. ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
  74. ukphy4: OUI 0x00e04c, model 0x0016, rev. 1
  75. ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
  76. random: harvesting attach, 8 bytes (4 bits) from ukphy4
  77. random: harvesting attach, 8 bytes (4 bits) from miibus4
  78. etherswitch0: <Switch controller> on rtl8366rb0
  79. random: harvesting attach, 8 bytes (4 bits) from etherswitch0
  80. random: harvesting attach, 8 bytes (4 bits) from rtl8366rb0
  81. iic0: <I2C generic I/O> on iicbus0
  82. random: harvesting attach, 8 bytes (4 bits) from iic0
  83. random: harvesting attach, 8 bytes (4 bits) from iicbus0
  84. random: harvesting attach, 8 bytes (4 bits) from iicbb0
  85. random: harvesting attach, 8 bytes (4 bits) from gpioiic0
  86. random: harvesting attach, 8 bytes (4 bits) from gpiobus0
  87. gpioc0: <GPIO controller> on gpio0
  88. random: harvesting attach, 8 bytes (4 bits) from gpioc0
  89. random: harvesting attach, 8 bytes (4 bits) from gpio0
  90. random: harvesting attach, 8 bytes (4 bits) from apb0
  91. ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0
  92. usbus0: set host controller mode
  93. usbus0: EHCI version 1.0
  94. usbus0: set host controller mode
  95. usbus0 on ehci0
  96. ehci0: usbpf: Attached
  97. random: harvesting attach, 8 bytes (4 bits) from usbus0
  98. random: harvesting attach, 8 bytes (4 bits) from ehci0
  99. arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
  100. arge0: Overriding MAC from EEPROM
  101. arge0: finishing attachment, phymask 0000, proxy null
  102. arge0: bpf attached
  103. arge0: Ethernet address: 90:f6:52:f5:94:88
  104. random: harvesting attach, 8 bytes (4 bits) from arge0
  105. arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
  106. arge1: Generating random ethernet address.
  107. arge1: finishing attachment, phymask 0000, proxy null
  108. arge1: Unknown media 0
  109. arge1: bpf attached
  110. arge1: Ethernet address: 62:73:64:e7:2d:07
  111. random: harvesting attach, 8 bytes (4 bits) from arge1
  112. ath0: Vendor=0x168c, Device=0x000b
  113. ath0: Vendor=0x168c, Device=0x000b
  114. ath0: <Atheros 9130> at mem 0x180c0000-0x180effff irq 0 on nexus0
  115. ath0: eeprom @ 0x1fff1000 (4096 bytes)
  116. ath0: eeprom data @ 0xbfff1000
  117. ath0: [HT] enabling HT modes
  118. ath0: [HT] 2 RX streams; 2 TX streams
  119. ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
  120. ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
  121. ath0: 2T2R
  122. ath0: 11ng MCS 20MHz
  123. ath0: MCS 0-7: 6.5Mbps - 65Mbps
  124. ath0: MCS 8-15: 13Mbps - 130Mbps
  125. ath0: 11ng MCS 40MHz:
  126. ath0: MCS 0-7: 13.5Mbps - 135Mbps
  127. ath0: MCS 8-15: 27Mbps - 270Mbps
  128. ath0: 11ng MCS 40MHz SGI:
  129. ath0: MCS 0-7: 15Mbps - 150Mbps
  130. ath0: MCS 8-15: 30Mbps - 300Mbps
  131. ath0: AR9130 mac 20.1 RF2133 phy 10.2
  132. ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00d0
  133. ath0: Use hw queue 1 for WME_AC_BE traffic
  134. ath0: Use hw queue 0 for WME_AC_BK traffic
  135. ath0: Use hw queue 2 for WME_AC_VI traffic
  136. ath0: Use hw queue 3 for WME_AC_VO traffic
  137. ath0: Use hw queue 8 for CAB traffic
  138. ath0: Use hw queue 9 for beacons
  139. ath0: using multicast key search
  140. random: harvesting attach, 8 bytes (4 bits) from ath0
  141. spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
  142. spibus0: <spibus bus> on spi0
  143. mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0
  144. mx25l0: s25fl064, sector 65536 bytes, 128 sectors
  145. random: harvesting attach, 8 bytes (4 bits) from mx25l0
  146. random: harvesting attach, 8 bytes (4 bits) from spibus0
  147. random: harvesting attach, 8 bytes (4 bits) from spi0
  148. ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
  149. ar71xx_wdog0: Previous reset was due to watchdog timeout
  150. random: harvesting attach, 8 bytes (4 bits) from ar71xx_wdog0
  151. random: harvesting attach, 8 bytes (4 bits) from nexus0
  152. Device configuration finished.
  153. Timecounters tick every 1.000 msec
  154. tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
  155. lo0: bpf attached
  156. rtl8366rb0port0: link state changed to DOWN
  157. rtl8366rb0port1: link state changed to DOWN
  158. rtl8366rb0port2: link state changed to DOWN
  159. rtl8366rb0port3: link state changed to DOWN
  160. rtl8366rb0port4: link state changed to DOWN
  161. GEOM: new disk flash/spi0
  162. usbus0: 480Mbps High Speed USB v2.0
  163. MAP: flash/spi0: 0x20000, data=0x20000 "/dev/map/uboot"
  164. MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000
  165. ugen0.1: <Atheros> at usbus0
  166. uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
  167. MAP: flash/spi0: 20000x200000, data=0x200000 "/dev/map/kernel"
  168. MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000
  169. MAP: flash/spi0: 220000x5c0000, data=0x5c0000 "/dev/map/rootfs"
  170. MAP: flash/spi0: 7e0000x10000, data=0x10000 "/dev/map/cfg"
  171. MAP: flash/spi0: 7f0000x10000, data=0x10000 "/dev/map/art"
  172. MAP: No valid partition found at map/rootfs.uncompress
  173. hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> MIPS24K/2/32/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA>
  174. Root mount waiting for: usbus0
  175. uhub0: 1 port with 1 removable, self powered
  176. random: harvesting attach, 8 bytes (4 bits) from uhub0
  177. Trying to mount root from ufs:map/rootfs.uncompress []...
  178. warning: no time-of-day clock registered, system time will not be set accurately
  179. start_init: trying /sbin/init
  180. rtl8366rb0port2: link state changed to UP
  181. Oct 10 16:01:31 init: login_getclass: unknown class 'daemon'
  182. MAP: No valid partition found at md0
  183. random: unblocking device.
  184. MAP: No valid partition found at md0
  185. MAP: No valid partition found at md1
  186. MAP: No valid partition found at md1
  187. MAP: No valid partition found at md2
  188. MAP: No valid partition found at md2
  189. *** Populating /var ..
  190. *** Loading configuration files ..
  191. *** Restoring from /dev/map/cfg ..
  192. 1+0 records in
  193. 1+0 records out
  194. 65536 bytes transferred in 2.388654 secs (27436 bytes/sec)
  195. gunzip: invalid compressed data--crc error
  196. etc/cfg/manifest
  197. etc/master.passwd
  198. etc/group
  199. etc/cfg/rc.conf
  200. 7 blocks
  201. *** Completed.
  202. *** setting up hostname
  203. *** Load kernel modules
  204. .. bridgestp
  205. kldload: can't load bridgestp: module already loaded or in kernel
  206. .. if_bridge
  207. kldload: can't load if_bridge: No such file or directory
  208. .. random
  209. kldload: can't load random: No such file or directory
  210. *** Setting kern.random.harvest.mask=511
  211. kern.random.harvest.mask: 2047 -> 511
  212. *** bringing up loopback ..
  213. *** Default password/login databases ..
  214. *** Starting networking via /etc/rc.d/base/net
  215. /etc/rc.d/base/net: /etc/rc.d/net/ether/hosta{_ifname}.conff_IF_wifi_hostap_wpa_pa: not found
  216. *** Interface: wlan0: start
  217. ath_hal_reg_write: reg=0x000080e0, val=0xffffffff, pm=1
  218. ath_hal_reg_write: reg=0x000080e4, val=0x0000ffff, pm=1
  219. wlan0: bpf attached
  220. wlan0: bpf attached
  221. wlan0: Ethernet address: 00:19:e0:66:66:68
  222. MBSSID Set bit 22 of AR_STA_ID 0xb8c16866
  223. MBSSID Set bit 22 of AR_STA_ID 0xb8c16866
  224. Configuration file: /var/run/hostapd.wlan0.conf
  225. Using interface wlan0 with hwaddr 00:19:e0:66:66:68 and ssid "Vleuck"
  226. MBSSID Set bit 22 of AR_STA_ID 0xb8c16866
  227. wlan0: interface state UNINITIALIZED->ENABLED
  228. wlan0: AP-ENABLED
  229. *** Interface: wlan0: done
  230. *** Interface: bridge0: start
  231. bridge0: bpf attached
  232. bridge0: Ethernet address: 16:d8:2f:97:2f:2d
  233. arge0: promiscuous mode enabled
  234. bridge0: link state changed to UP
  235. wlan0: promiscuous mode enabled
  236. ifconfig: BRDGADD arge0: File exists
  237. *** Interface: bridge0: done
  238. *** inetd
  239. *** Done!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement