Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Booting Linux on physical CPU 0x0
- Linux version 3.9.8+ (root@media) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2 PREEMPT Tue Jul 2 17:38:12 CEST 2013
- CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- Machine: BCM2708
- Memory policy: ECC disabled, Data cache writeback
- On node 0 totalpages: 98304
- free_area_init_node: node 0, pgdat c0412690, node_mem_map c0450000
- Normal zone: 768 pages used for memmap
- Normal zone: 0 pages reserved
- Normal zone: 98304 pages, LIFO batch:31
- pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- pcpu-alloc: [0] 0
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
- Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1360 bcm2708_fb.fbheight=768 bcm2708.boardrev=0xe bcm2708.serial=0xd68a1117 smsc95xx.macaddr=B8:27:EB:8A:11:17 sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=LABEL=xbian-root-btrfs rootfsopts=subvol=root/@,noatime,compress=lzo,thread_pool=1,space_cache,autodefrag rootfstype=btrfs rootwait=10 smsc95xx.turbo_mode=N elevator=noop nohdparm splash logo.nologo quiet loglevel=0 noswap mod_scsi.scan=async
- PID hash table entries: 2048 (order: 1, 8192 bytes)
- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- __ex_table already sorted, skipping sort
- Memory: 384MB = 384MB total
- Memory: 382316k/382316k available, 10900k reserved, 0K highmem
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xd8800000 - 0xff000000 ( 616 MB)
- lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
- modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- .text : 0xc0008000 - 0xc03c9494 (3846 kB)
- .init : 0xc03ca000 - 0xc03e7364 ( 117 kB)
- .data : 0xc03e8000 - 0xc0412d20 ( 172 kB)
- .bss : 0xc0412d20 - 0xc044f23c ( 242 kB)
- SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- NR_IRQS:330
- sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- Switching to timer-based delay loop
- Console: colour dummy device 80x30
- console [tty1] enabled
- Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- Setting up static identity map for 0xc02e2160 - 0xc02e2198
- devtmpfs: initialized
- NET: Registered protocol family 16
- DMA: preallocated 4096 KiB pool for atomic coherent allocations
- bcm2708.uart_clock = 0
- hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
- hw-breakpoint: maximum watchpoint size is 4 bytes.
- mailbox: Broadcom VideoCore Mailbox driver
- bcm2708_vcio: mailbox at f200b880
- bcm_power: Broadcom power driver
- bcm_power_open() -> 0
- bcm_power_request(0, 8)
- bcm_mailbox_read -> 00000080, 0
- bcm_power_request -> 0
- Serial: AMBA PL011 UART driver
- dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
- bio: create slab <bio-0> at 0
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Switching to clocksource stc
- FS-Cache: Loaded
- CacheFiles: Loaded
- NET: Registered protocol family 2
- TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- TCP: Hash tables configured (established 4096 bind 4096)
- TCP: reno registered
- UDP hash table entries: 256 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- Unpacking initramfs...
- Freeing initrd memory: 2956K
- bcm2708_dma: DMA manager at f2007000
- bcm2708_gpio: bcm2708_gpio_probe c03f4890
- vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
- audit: initializing netlink socket (disabled)
- type=2000 audit(2.630:1): initialized
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 752
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- io scheduler noop registered (default)
- crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
- crc32: self tests passed, processed 225944 bytes in 2474000 nsec
- crc32c: CRC_LE_BITS = 64
- crc32c: self tests passed, processed 225944 bytes in 908000 nsec
- BCM2708FB: allocated DMA memory 579d0000
- BCM2708FB: allocated DMA channel 0 @ f2007000
- Console: switching to colour frame buffer device 170x48
- vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
- usbcore: registered new interface driver smsc95xx
- usbcore: registered new interface driver cdc_ncm
- dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- Core Release: 2.80a
- Setting default values for core params
- Finished setting default values for core params
- Using Buffer DMA mode
- Periodic Transfer Interrupt Enhancement - disabled
- Multiprocessor Interrupt Enhancement - disabled
- OTG VER PARAM: 0, OTG VER FLAG: 0
- Dedicated Tx FIFOs mode
- dwc_otg: Microframe scheduler enabled
- dwc_otg bcm2708_usb: DWC OTG Controller
- dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
- dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
- Init: Port Power? op_state=1
- Init: Power Port (0)
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: DWC OTG Controller
- usb usb1: Manufacturer: Linux 3.9.8+ dwc_otg_hcd
- usb usb1: SerialNumber: bcm2708_usb
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- dwc_otg: FIQ enabled
- dwc_otg: NAK holdoff enabled
- dwc_otg: FIQ split fix enabled
- Module dwc_common_port init
- bcm2835-cpufreq: min=700000 max=840000 cur=700000
- bcm2835-cpufreq: switching to governor performance
- bcm2835-cpufreq: switching to governor performance
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- sdhci: Enable low-latency mode
- mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
- mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
- sdhci-pltfm: SDHCI platform and OF driver helper
- hidraw: raw HID events driver (C) Jiri Kosina
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- TCP: cubic registered
- NET: Registered protocol family 17
- Key type dns_resolver registered
- VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
- registered taskstats version 1
- Freeing init memory: 116K
- mmc0: read SD Status register (SSR) after 2 attempts
- mmc0: new high speed SDHC card at address 59b4
- mmcblk0: mmc0:59b4 NCard 7.37 GiB
- mmcblk0: p1 p2
- Indeed it is in host mode hprt0 = 00021501
- udevd[57]: starting version 175
- usb 1-1: new high-speed USB device number 2 using dwc_otg
- Indeed it is in host mode hprt0 = 00001101
- usb 1-1: New USB device found, idVendor=0424, idProduct=9512
- usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 3 ports detected
- raid6: int32x1 26 MB/s
- raid6: int32x2 41 MB/s
- raid6: int32x4 55 MB/s
- usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- raid6: int32x8 61 MB/s
- raid6: using algorithm int32x8 (61 MB/s)
- raid6: using intx1 recovery algorithm
- xor: measuring software checksum speed
- usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- smsc95xx v1.0.4
- arm4regs : 1171.600 MB/sec
- 8regs : 564.400 MB/sec
- 32regs : 530.000 MB/sec
- xor: using function: arm4regs (1171.600 MB/sec)
- smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:8a:11:17
- usb 1-1.3: new high-speed USB device number 4 using dwc_otg
- Btrfs loaded
- device label xbian-root-btrfs devid 1 transid 306 /dev/mmcblk0p2
- usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
- usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- usb 1-1.3: Product: USB2.0 Hub
- hub 1-1.3:1.0: USB hub found
- hub 1-1.3:1.0: 4 ports detected
- usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg
- usb 1-1.3.1: New USB device found, idVendor=05e3, idProduct=0608
- usb 1-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- usb 1-1.3.1: Product: USB2.0 Hub
- hub 1-1.3.1:1.0: USB hub found
- hub 1-1.3.1:1.0: 4 ports detected
- device label xbian-root-btrfs devid 1 transid 306 /dev/mmcblk0p2
- btrfs: use lzo compression
- btrfs: enabling auto defrag
- btrfs: disk space caching is enabled
- Btrfs detected SSD devices, enabling SSD mode
- usb 1-1.3.3: new low-speed USB device number 6 using dwc_otg
- usb 1-1.3.3: New USB device found, idVendor=046d, idProduct=c043
- usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 1-1.3.3: Product: USB-PS/2 Optical Mouse
- usb 1-1.3.3: Manufacturer: Logitech
- input: Logitech USB-PS/2 Optical Mouse as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/input/input0
- hid-generic 0003:046D:C043.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-bcm2708_usb-1.3.3/input0
- usb 1-1.3.4: new high-speed USB device number 7 using dwc_otg
- usb 1-1.3.4: New USB device found, idVendor=174c, idProduct=55aa
- usb 1-1.3.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
- usb 1-1.3.4: Product: AS2105
- usb 1-1.3.4: Manufacturer: ASMedia
- usb 1-1.3.4: SerialNumber: 0123456789ABCDEF
- usb 1-1.3.1.3: new low-speed USB device number 8 using dwc_otg
- usb 1-1.3.1.3: New USB device found, idVendor=1a2c, idProduct=0021
- usb 1-1.3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 1-1.3.1.3: Product: USB Keykoard
- usb 1-1.3.1.3: Manufacturer: USB
- input: USB USB Keykoard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1.3/1-1.3.1.3:1.0/input/input1
- hid-generic 0003:1A2C:0021.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-bcm2708_usb-1.3.1.3/input0
- init: frandom pre-start process (238) terminated with status 1
- init: mounted-proc main process (245) terminated with status 1
- FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- device label xbian-root-btrfs devid 1 transid 306 /dev/mmcblk0p2
- udevd[306]: starting version 175
- Initializing USB Mass Storage driver...
- scsi0 : usb-storage 1-1.3.4:1.0
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- mousedev: PS/2 mouse device common for all mice
- scsi 0:0:0:0: Direct-Access TOSHIBA MK1237GSX DL13 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
- sd 0:0:0:0: [sda] No Caching mode page present
- sd 0:0:0:0: [sda] Assuming drive cache: write through
- sd 0:0:0:0: [sda] No Caching mode page present
- sd 0:0:0:0: [sda] Assuming drive cache: write through
- sda: sda1
- sd 0:0:0:0: [sda] No Caching mode page present
- sd 0:0:0:0: [sda] Assuming drive cache: write through
- sd 0:0:0:0: [sda] Attached SCSI disk
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- device label xbian-root-btrfs devid 1 transid 306 /dev/mmcblk0p2
- smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
- zram: module is from the staging directory, the quality is unknown, you have been warned.
- zram: Created 2 device(s) ...
- Adding 127996k swap on /dev/zram0. Priority:20 extents:1 across:127996k SS
- loop: module loaded
- EXT4-fs (sda): no journal found
- Adding 383996k swap on /dev/loop0. Priority:0 extents:1 across:383996k
- init: failsafe main process (525) killed by TERM signal
- hid-generic 0003:1A2C:0021.0003: usb_submit_urb(ctrl) failed: -1
- hid-generic 0003:1A2C:0021.0003: timeout initializing reports
- input: USB USB Keykoard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1.3/1-1.3.1.3:1.1/input/input2
- hid-generic 0003:1A2C:0021.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-bcm2708_usb-1.3.1.3/input1
- init: xbmc-norun main process (543) killed by TERM signal
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement