API tools faq
paste
Advertisement
Guest User

Shite Board New Rs Component

a guest
Oct 4th, 2013
50
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.73 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.8.13-bone20 (root@imx6q-sabrelite-1gb) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Wed May 29 03:11:01 UTC 2013
  4. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
  7. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  8. [ 0.000000] On node 0 totalpages: 130816
  9. [ 0.000000] free_area_init_node: node 0, pgdat c0977940, node_mem_map c09f1000
  10. [ 0.000000] Normal zone: 1024 pages used for memmap
  11. [ 0.000000] Normal zone: 0 pages reserved
  12. [ 0.000000] Normal zone: 129792 pages, LIFO batch:31
  13. [ 0.000000] AM335X ES1.0 (neon )
  14. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0e00000 s14080 r8192 d14592 u36864
  15. [ 0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096
  16. [ 0.000000] pcpu-alloc: [0] 0
  17. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
  18. [ 0.000000] Kernel command line: console=ttyO0,115200n8 fixrtc root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc
  19. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  20. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  21. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  22. [ 0.000000] __ex_table already sorted, skipping sort
  23. [ 0.000000] allocated 1048576 bytes of page_cgroup
  24. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  25. [ 0.000000] Memory: 511MB = 511MB total
  26. [ 0.000000] Memory: 507432k/507432k available, 16856k reserved, 0K highmem
  27. [ 0.000000] Virtual kernel memory layout:
  28. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  29. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  30. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  31. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  32. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  33. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  34. [ 0.000000] .text : 0xc0008000 - 0xc08b01a8 (8865 kB)
  35. [ 0.000000] .init : 0xc08b1000 - 0xc08f9700 ( 290 kB)
  36. [ 0.000000] .data : 0xc08fa000 - 0xc097a770 ( 514 kB)
  37. [ 0.000000] .bss : 0xc097a770 - 0xc09f07fc ( 473 kB)
  38. [ 0.000000] Hierarchical RCU implementation.
  39. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  40. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  41. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  42. [ 0.000000] Total of 128 interrupts on 1 active controller
  43. [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
  44. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  45. [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
  46. [ 0.000000] Console: colour dummy device 80x30
  47. [ 0.000391] Calibrating delay loop... 363.67 BogoMIPS (lpj=354304)
  48. [ 0.017385] pid_max: default: 32768 minimum: 301
  49. [ 0.017632] Security Framework initialized
  50. [ 0.017731] Mount-cache hash table entries: 512
  51. [ 0.027188] Initializing cgroup subsys cpuacct
  52. [ 0.027226] Initializing cgroup subsys memory
  53. [ 0.027298] Initializing cgroup subsys blkio
  54. [ 0.027446] CPU: Testing write buffer coherency: ok
  55. [ 0.028024] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  56. [ 0.028102] Setting up static identity map for 0x80605b00 - 0x80605b58
  57. [ 0.029773] Brought up 1 CPUs
  58. [ 0.029800] SMP: Total of 1 processors activated (363.67 BogoMIPS).
  59. [ 0.031163] devtmpfs: initialized
  60. [ 0.095211] pinctrl core: initialized pinctrl subsystem
  61. [ 0.095450] rstctl core: initialized rstctl subsystem
  62. [ 0.096040] regulator-dummy: no parameters
  63. [ 0.096584] NET: Registered protocol family 16
  64. [ 0.097550] DMA: preallocated 256 KiB pool for atomic coherent allocations
  65. [ 0.107513] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  66. [ 0.108270] platform 49000000.edma: alias fck already exists
  67. [ 0.108301] platform 49000000.edma: alias fck already exists
  68. [ 0.108324] platform 49000000.edma: alias fck already exists
  69. [ 0.109538] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
  70. [ 0.109712] OMAP GPIO hardware version 0.1
  71. [ 0.111220] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
  72. [ 0.112506] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
  73. [ 0.114018] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
  74. [ 0.114568] of_get_named_gpio_flags exited with status 52
  75. [ 0.114598] gpio-rctrl rstctl.3: loaded OK
  76. [ 0.119925] hw-breakpoint: debug architecture 0x4 unsupported.
  77. [ 0.122084] cpsw.0: No hwaddr in dt. Using 90:59:af:5b:f5:07 from efuse
  78. [ 0.122116] cpsw.1: No hwaddr in dt. Using 90:59:af:5b:f5:09 from efuse
  79. [ 0.135810] bio: create slab <bio-0> at 0
  80. [ 0.147431] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
  81. [ 0.147659] of_get_named_gpio_flags: can't parse gpios property
  82. [ 0.147882] vmmcsd_fixed: 3300 mV
  83. [ 0.150779] SCSI subsystem initialized
  84. [ 0.151190] usbcore: registered new interface driver usbfs
  85. [ 0.151310] usbcore: registered new interface driver hub
  86. [ 0.151639] usbcore: registered new device driver usb
  87. [ 0.153735] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  88. [ 0.155320] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
  89. [ 0.157635] DCDC1: at 1500 mV
  90. [ 0.158921] vdd_mpu: 925 <--> 1325 mV at 1100 mV
  91. [ 0.160132] vdd_core: 925 <--> 1150 mV at 1100 mV
  92. [ 0.161264] LDO1: at 1800 mV
  93. [ 0.162406] LDO2: at 3300 mV
  94. [ 0.164370] LDO3: 1800 mV
  95. [ 0.165490] LDO4: at 3300 mV
  96. [ 0.166538] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  97. [ 0.167318] omap_i2c 44e0b000.i2c: unable to select pin group
  98. [ 0.168186] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
  99. [ 0.170758] omap_i2c 4819c000.i2c: unable to select pin group
  100. [ 0.170988] media: Linux media interface: v0.10
  101. [ 0.171106] Linux video capture interface: v2.00
  102. [ 0.171940] Advanced Linux Sound Architecture Driver Initialized.
  103. [ 0.172929] NetLabel: Initializing
  104. [ 0.172948] NetLabel: domain hash size = 128
  105. [ 0.172960] NetLabel: protocols = UNLABELED CIPSOv4
  106. [ 0.173078] NetLabel: unlabeled traffic allowed by default
  107. [ 0.173432] Switching to clocksource gp_timer
  108. [ 0.227781] NET: Registered protocol family 2
  109. [ 0.228975] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  110. [ 0.229119] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
  111. [ 0.229265] TCP: Hash tables configured (established 4096 bind 4096)
  112. [ 0.229368] TCP: reno registered
  113. [ 0.229395] UDP hash table entries: 256 (order: 1, 12288 bytes)
  114. [ 0.229437] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  115. [ 0.229881] NET: Registered protocol family 1
  116. [ 0.230611] RPC: Registered named UNIX socket transport module.
  117. [ 0.230635] RPC: Registered udp transport module.
  118. [ 0.230647] RPC: Registered tcp transport module.
  119. [ 0.230660] RPC: Registered tcp NFSv4.1 backchannel transport module.
  120. [ 0.231771] CPU PMU: probing PMU on CPU 0
  121. [ 0.231802] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  122. [ 0.232474] omap2_mbox_probe: platform not supported
  123. [ 0.491997] VFS: Disk quotas dquot_6.5.2
  124. [ 0.492264] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  125. [ 0.493558] NFS: Registering the id_resolver key type
  126. [ 0.493669] Key type id_resolver registered
  127. [ 0.493686] Key type id_legacy registered
  128. [ 0.493754] fuse init (API version 7.20)
  129. [ 0.494760] Btrfs loaded
  130. [ 0.494930] msgmni has been set to 991
  131. [ 0.498013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  132. [ 0.498040] io scheduler noop registered
  133. [ 0.498054] io scheduler deadline registered
  134. [ 0.498108] io scheduler cfq registered (default)
  135. [ 0.499859] tps65217-bl tps65217-bl: no platform data provided
  136. [ 0.499903] tps65217-bl: probe of tps65217-bl failed with error -22
  137. [ 0.500780] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  138. [ 0.503398] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
  139. [ 0.503859] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
  140. [ 1.214113] console [ttyO0] enabled
  141. [ 1.218873] [drm] Initialized drm 1.1.0 20060810
  142. [ 1.237316] brd: module loaded
  143. [ 1.247482] loop: module loaded
  144. [ 1.250953] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  145. [ 1.258246] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  146. [ 1.265524] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  147. [ 1.272798] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  148. [ 1.280075] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  149. [ 1.294136] bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,0A5C,2913BBBK0769'
  150. [ 1.301932] bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black
  151. [ 1.339577] bone-capemgr bone_capemgr.9: slot #0: No cape found
  152. [ 1.376685] bone-capemgr bone_capemgr.9: slot #1: No cape found
  153. [ 1.413794] bone-capemgr bone_capemgr.9: slot #2: No cape found
  154. [ 1.450901] bone-capemgr bone_capemgr.9: slot #3: No cape found
  155. [ 1.457154] bone-capemgr bone_capemgr.9: slot #4: specific override
  156. [ 1.463755] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4
  157. [ 1.471791] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
  158. [ 1.481926] bone-capemgr bone_capemgr.9: slot #5: specific override
  159. [ 1.488521] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5
  160. [ 1.496554] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
  161. [ 1.506994] bone-capemgr bone_capemgr.9: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  162. [ 1.515878] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  163. [ 1.524681] bone-capemgr bone_capemgr.9: initialized OK.
  164. [ 1.530288] bone-capemgr bone_capemgr.9: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  165. [ 1.539051] bone-capemgr bone_capemgr.9: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  166. [ 1.549677] OneNAND driver initializing
  167. [ 1.555105] usbcore: registered new interface driver cdc_ether
  168. [ 1.561287] bone-capemgr bone_capemgr.9: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  169. [ 1.570133] usbcore: registered new interface driver rndis_host
  170. [ 1.576441] bone-capemgr bone_capemgr.9: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  171. [ 1.585240] usbcore: registered new interface driver cdc_ncm
  172. [ 1.591221] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
  173. [ 1.605561] Initializing USB Mass Storage driver...
  174. [ 1.610857] usbcore: registered new interface driver usb-storage
  175. [ 1.617169] USB Mass Storage support registered.
  176. [ 1.622059] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
  177. [ 1.632790] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
  178. [ 1.647073] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  179. [ 1.653679] bone-capemgr bone_capemgr.9: slot #4: #2 overlays
  180. [ 1.660195] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
  181. [ 1.665450] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
  182. [ 1.674502] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays.
  183. [ 1.681388] bone-capemgr bone_capemgr.9: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
  184. [ 1.690092] bone-capemgr bone_capemgr.9: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
  185. [ 1.701363] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  186. [ 1.701384] musb-hdrc: MHDRC RTL version 2.0
  187. [ 1.701399] musb-hdrc: setup fifo_mode 4
  188. [ 1.701425] musb-hdrc: 28/31 max ep, 16384/16384 memory
  189. [ 1.701569] musb-hdrc musb-hdrc.0.auto: *** mode=3
  190. [ 1.706623] musb-hdrc musb-hdrc.0.auto: *** power=250
  191. [ 1.712885] bone-capemgr bone_capemgr.9: slot #5: #4 overlays
  192. [ 1.721213] platform 4830e000.fb: alias fck already exists
  193. [ 1.727869] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
  194. [ 1.733181] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
  195. [ 1.743598] bone-capemgr bone_capemgr.9: slot #5: Applied #4 overlays.
  196. [ 1.750545] bone-capemgr bone_capemgr.9: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1)
  197. [ 1.759306] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  198. [ 1.759329] musb-hdrc: MHDRC RTL version 2.0
  199. [ 1.759343] musb-hdrc: setup fifo_mode 4
  200. [ 1.759366] musb-hdrc: 28/31 max ep, 16384/16384 memory
  201. [ 1.759592] musb-hdrc musb-hdrc.1.auto: *** mode=1
  202. [ 1.764645] musb-hdrc musb-hdrc.1.auto: *** power=250
  203. [ 1.769962] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  204. [ 1.776474] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
  205. [ 1.784791] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
  206. [ 1.784975] usb usb1: default language 0x0409
  207. [ 1.785036] usb usb1: udev 1, busnum 1, minor = 0
  208. [ 1.785058] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  209. [ 1.792219] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  210. [ 1.799805] usb usb1: Product: MUSB HDRC host driver
  211. [ 1.805030] usb usb1: Manufacturer: Linux 3.8.13-bone20 musb-hcd
  212. [ 1.811339] usb usb1: SerialNumber: musb-hdrc.1.auto
  213. [ 1.817338] usb usb1: usb_probe_device
  214. [ 1.817366] usb usb1: configuration #1 chosen from 1 choice
  215. [ 1.817439] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  216. [ 1.817640] hub 1-0:1.0: usb_probe_interface
  217. [ 1.817662] hub 1-0:1.0: usb_probe_interface - got id
  218. [ 1.817691] hub 1-0:1.0: USB hub found
  219. [ 1.821718] hub 1-0:1.0: 1 port detected
  220. [ 1.825888] hub 1-0:1.0: standalone hub
  221. [ 1.825906] hub 1-0:1.0: individual port power switching
  222. [ 1.825922] hub 1-0:1.0: no over-current protection
  223. [ 1.825938] hub 1-0:1.0: Single TT
  224. [ 1.825956] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
  225. [ 1.825973] hub 1-0:1.0: power on to power good time: 10ms
  226. [ 1.826018] hub 1-0:1.0: local power source is good
  227. [ 1.826130] hub 1-0:1.0: enabling power on all ports
  228. [ 1.827343] mousedev: PS/2 mouse device common for all mice
  229. [ 1.835589] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  230. [ 1.843588] i2c /dev entries driver
  231. [ 1.848623] Driver for 1-wire Dallas network protocol.
  232. [ 1.855576] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  233. [ 1.863203] cpuidle: using governor ladder
  234. [ 1.867532] cpuidle: using governor menu
  235. [ 1.872047] of_get_named_gpio_flags: can't parse gpios property
  236. [ 1.872066] of_get_named_gpio_flags: can't parse gpios property
  237. [ 1.872080] of_get_named_gpio_flags: can't parse gpios property
  238. [ 1.872116] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
  239. [ 1.879365] omap_hsmmc mmc.4: Failed to get rstctl; not using any
  240. [ 1.885802] omap_hsmmc mmc.4: unable to select pin group
  241. [ 1.891670] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
  242. [ 1.898882] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
  243. [ 1.906225] mmc.4 supply vmmc_aux not found, using dummy regulator
  244. [ 1.912887] omap_hsmmc mmc.4: pins are not configured from the driver
  245. [ 1.927626] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
  246. [ 1.927708] hub 1-0:1.0: hub_suspend
  247. [ 1.927750] usb usb1: bus auto-suspend, wakeup 1
  248. [ 1.947169] of_get_named_gpio_flags: can't parse gpios property
  249. [ 1.947191] of_get_named_gpio_flags: can't parse gpios property
  250. [ 1.947205] of_get_named_gpio_flags: can't parse gpios property
  251. [ 1.947255] gpio-rctrl rstctl.3: gpio_rctrl_request eMMC_RSTn
  252. [ 1.953476] omap_hsmmc mmc.5: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
  253. [ 1.961382] gpio-rctrl rstctl.3: gpio_rctrl_deassert eMMC_RSTn
  254. [ 1.967885] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
  255. [ 1.975057] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
  256. [ 1.982653] mmc.5 supply vmmc_aux not found, using dummy regulator
  257. [ 1.989313] omap_hsmmc mmc.5: pins are not configured from the driver
  258. [ 2.023835] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
  259. [ 2.035583] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
  260. [ 2.042883] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
  261. [ 2.051915] usb usb1: usb wakeup-resume
  262. [ 2.051964] usb usb1: usb auto-resume
  263. [ 2.051993] hub 1-0:1.0: hub_resume
  264. [ 2.052047] hub 1-0:1.0: port 1: status 0301 change 0001
  265. [ 2.052312] leds-gpio gpio-leds.8: pins are not configured from the driver
  266. [ 2.059593] of_get_named_gpio_flags exited with status 53
  267. [ 2.059616] of_get_named_gpio_flags exited with status 54
  268. [ 2.059636] of_get_named_gpio_flags exited with status 55
  269. [ 2.059655] of_get_named_gpio_flags exited with status 56
  270. [ 2.059773] of_get_named_gpio_flags exited with status 53
  271. [ 2.060047] of_get_named_gpio_flags exited with status 54
  272. [ 2.060314] of_get_named_gpio_flags exited with status 55
  273. [ 2.060498] of_get_named_gpio_flags exited with status 56
  274. [ 2.060890] ledtrig-cpu: registered to indicate activity on CPUs
  275. [ 2.067799] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
  276. [ 2.075094] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
  277. [ 2.083922] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
  278. [ 2.090257] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
  279. [ 2.097524] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
  280. [ 2.106125] usbcore: registered new interface driver usbhid
  281. [ 2.112053] usbhid: USB HID core driver
  282. [ 2.118813] of_get_named_gpio_flags exited with status 59
  283. [ 2.120354] davinci_evm sound.13: nxp-hdmi-hifi <-> 48038000.mcasp mapping ok
  284. [ 2.131955] TCP: cubic registered
  285. [ 2.135603] NET: Registered protocol family 10
  286. [ 2.141869] NET: Registered protocol family 17
  287. [ 2.147148] Key type dns_resolver registered
  288. [ 2.155176] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
  289. [ 2.155253] hub 1-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
  290. [ 2.151984] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  291. [ 2.160466] ThumbEE CPU extension supported.
  292. [ 2.165012] mmc1: BKOPS_EN bit is not set
  293. [ 2.169271] Registering SWP/SWPB emulation handler
  294. [ 2.175398] registered taskstats version 1
  295. [ 2.182536] mmc1: new high speed MMC card at address 0001
  296. [ 2.188634] of_get_named_gpio_flags: can't parse gpios property
  297. [ 2.188665] tilcdc 4830e000.fb: No power control GPIO
  298. [ 2.194878] mmcblk0: mmc1:0001 MMC02G 1.78 GiB
  299. [ 2.201696] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
  300. [ 2.208757] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
  301. [ 2.217370] mmcblk0: p1 p2
  302. [ 2.223309] mmcblk0boot1: unknown partition table
  303. [ 2.230519] mmcblk0boot0: unknown partition table
  304. [ 2.259567] usb 1-1: new low-speed USB device number 2 using musb-hdrc
  305. [ 2.321025] tilcdc 4830e000.fb: found TDA19988
  306. [ 2.326551] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  307. [ 2.333507] [drm] No driver support for vblank timestamp query.
  308. [ 2.393258] usb 1-1: skipped 1 descriptor after interface
  309. [ 2.393278] usb 1-1: skipped 1 descriptor after interface
  310. [ 2.393949] usb 1-1: default language 0x0409
  311. [ 2.396582] usb 1-1: udev 2, busnum 1, minor = 1
  312. [ 2.396598] usb 1-1: New USB device found, idVendor=046d, idProduct=c326
  313. [ 2.396610] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  314. [ 2.396620] usb 1-1: Product: USB Keyboard
  315. [ 2.396629] usb 1-1: Manufacturer: Logitech
  316. [ 2.397227] usb 1-1: usb_probe_device
  317. [ 2.397245] usb 1-1: configuration #1 chosen from 1 choice
  318. [ 2.399260] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
  319. [ 2.399528] usbhid 1-1:1.0: usb_probe_interface
  320. [ 2.399540] usbhid 1-1:1.0: usb_probe_interface - got id
  321. [ 2.404820] input: Logitech USB Keyboard as /devices/ocp.2/47400000.usb/musb-hdrc.1.auto/usb1/1-1/1-1:1.0/input/input1
  322. [ 2.405305] hid-generic 0003:046D:C326.0001: input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-musb-hdrc.1.auto-1/input0
  323. [ 2.405481] usb 1-1: adding 1-1:1.1 (config #1, interface 1)
  324. [ 2.405721] usbhid 1-1:1.1: usb_probe_interface
  325. [ 2.405733] usbhid 1-1:1.1: usb_probe_interface - got id
  326. [ 2.413337] input: Logitech USB Keyboard as /devices/ocp.2/47400000.usb/musb-hdrc.1.auto/usb1/1-1/1-1:1.1/input/input2
  327. [ 2.413827] hid-generic 0003:046D:C326.0002: input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-musb-hdrc.1.auto-1/input1
  328. [ 2.414372] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
  329. [ 2.414418] hub 1-0:1.0: port 1 enable change, status 00000303
  330. [ 2.448969] tilcdc 4830e000.fb: Connected to an HDMI monitor with cea mode 8
  331. [ 2.475178] Console: switching to colour frame buffer device 160x45
  332. [ 2.569739] tilcdc 4830e000.fb: fb0: frame buffer device
  333. [ 2.575407] tilcdc 4830e000.fb: registered panic notifier
  334. [ 2.581100] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
  335. [ 2.636506] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  336. [ 2.642932] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  337. [ 2.650664] libphy: 4a101000.mdio: probed
  338. [ 2.654951] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  339. [ 2.664813] Detected MACID = 90:59:af:5b:f5:07
  340. [ 2.669488] cpsw 4a100000.ethernet: NAPI disabled
  341. [ 2.676593] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
  342. [ 2.738001] tilcdc 4830e000.fb: timeout waiting for framedone
  343. [ 2.751853] ALSA device list:
  344. [ 2.754979] #0: TI BeagleBone Black
  345. [ 2.780549] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  346. [ 2.789183] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  347. [ 2.799587] devtmpfs: mounted
  348. [ 2.803126] Freeing init memory: 288K
  349. [ 3.791827] udevd[195]: starting version 175
  350. [ 6.863975] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  351. [ 7.113161] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  352. [ 826.787249] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
  353. [ 826.787322] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
  354. [ 826.787341] usb 1-1: USB disconnect, device number 2
  355. [ 826.793654] usb 1-1: unregistering device
  356. [ 826.793673] usb 1-1: unregistering interface 1-1:1.0
  357. [ 826.793911] musb-hdrc musb-hdrc.1.auto: shutdown urb df36f3c0 ep1in-intr
  358. [ 826.798346] usb 1-1: unregistering interface 1-1:1.1
  359. [ 826.800703] musb-hdrc musb-hdrc.1.auto: shutdown urb df5dfcc0 ep2in-intr
  360. [ 826.803676] usb 1-1: usb_disable_device nuking all URBs
  361. [ 826.911847] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
  362. [ 826.911955] hub 1-0:1.0: hub_suspend
  363. [ 826.911985] usb usb1: bus auto-suspend, wakeup 1
  364. [ 850.159453] usb usb1: usb wakeup-resume
  365. [ 850.159502] usb usb1: usb auto-resume
  366. [ 850.159523] hub 1-0:1.0: hub_resume
  367. [ 850.159580] hub 1-0:1.0: port 1: status 0101 change 0001
  368. [ 850.261527] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
  369. [ 850.261611] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
  370. [ 850.366924] usb 1-1: new high-speed USB device number 3 using musb-hdrc
  371. [ 850.492129] usb 1-1: udev 3, busnum 1, minor = 2
  372. [ 850.492147] usb 1-1: New USB device found, idVendor=0409, idProduct=0059
  373. [ 850.499166] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  374. [ 850.511338] usb 1-1: usb_probe_device
  375. [ 850.511365] usb 1-1: configuration #1 chosen from 1 choice
  376. [ 850.511651] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
  377. [ 850.511841] hub 1-1:1.0: usb_probe_interface
  378. [ 850.511856] hub 1-1:1.0: usb_probe_interface - got id
  379. [ 850.511881] hub 1-1:1.0: USB hub found
  380. [ 850.523302] hub 1-1:1.0: 4 ports detected
  381. [ 850.533054] hub 1-1:1.0: standalone hub
  382. [ 850.533079] hub 1-1:1.0: individual port power switching
  383. [ 850.533089] hub 1-1:1.0: individual port over-current protection
  384. [ 850.533099] hub 1-1:1.0: Single TT
  385. [ 850.533111] hub 1-1:1.0: TT requires at most 16 FS bit times (1332 ns)
  386. [ 850.533120] hub 1-1:1.0: Port indicators are supported
  387. [ 850.533130] hub 1-1:1.0: power on to power good time: 100ms
  388. [ 850.533277] hub 1-1:1.0: local power source is good
  389. [ 850.533511] hub 1-1:1.0: enabling power on all ports
  390. [ 850.533996] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
  391. [ 850.534036] hub 1-0:1.0: port 1 enable change, status 00000503
  392. [ 850.634787] hub 1-1:1.0: port 4: status 0301 change 0001
  393. [ 850.736107] hub 1-1:1.0: state 7 ports 4 chg 0010 evt 0000
  394. [ 850.736205] hub 1-1:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
  395. [ 850.749821] hub 1-1:1.0: port 4 not reset yet, waiting 10ms
  396. [ 850.816153] usb 1-1.4: new low-speed USB device number 4 using musb-hdrc
  397. [ 850.837678] hub 1-1:1.0: port 4 not reset yet, waiting 10ms
  398. [ 850.922317] usb 1-1.4: skipped 1 descriptor after interface
  399. [ 850.922336] usb 1-1.4: skipped 1 descriptor after interface
  400. [ 850.922958] usb 1-1.4: default language 0x0409
  401. [ 850.925397] usb 1-1.4: udev 4, busnum 1, minor = 3
  402. [ 850.925414] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c326
  403. [ 850.932618] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  404. [ 850.940244] usb 1-1.4: Product: USB Keyboard
  405. [ 850.944702] usb 1-1.4: Manufacturer: Logitech
  406. [ 850.954351] usb 1-1.4: usb_probe_device
  407. [ 850.954381] usb 1-1.4: configuration #1 chosen from 1 choice
  408. [ 850.956540] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
  409. [ 850.956877] usbhid 1-1.4:1.0: usb_probe_interface
  410. [ 850.956895] usbhid 1-1.4:1.0: usb_probe_interface - got id
  411. [ 850.963281] input: Logitech USB Keyboard as /devices/ocp.2/47400000.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4:1.0/input/input3
  412. [ 850.988515] hid-generic 0003:046D:C326.0003: input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-musb-hdrc.1.auto-1.4/input0
  413. [ 851.014883] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
  414. [ 851.015143] usbhid 1-1.4:1.1: usb_probe_interface
  415. [ 851.015160] usbhid 1-1.4:1.1: usb_probe_interface - got id
  416. [ 851.024473] input: Logitech USB Keyboard as /devices/ocp.2/47400000.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4:1.1/input/input4
  417. [ 851.049161] hid-generic 0003:046D:C326.0004: input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-musb-hdrc.1.auto-1.4/input1
  418. [ 892.464225] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
  419. [ 892.464395] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s
  420. [ 892.572043] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
  421. [ 892.585735] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
  422. [ 892.652091] usb 1-1.1: new high-speed USB device number 5 using musb-hdrc
  423. [ 892.673600] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
  424. [ 892.756659] usb 1-1.1: default language 0x0409
  425. [ 892.763835] usb 1-1.1: udev 5, busnum 1, minor = 4
  426. [ 892.763853] usb 1-1.1: New USB device found, idVendor=13fe, idProduct=1f00
  427. [ 892.771054] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  428. [ 892.778683] usb 1-1.1: Product: DataTraveler 2.0
  429. [ 892.783504] usb 1-1.1: Manufacturer: Kingston
  430. [ 892.788057] usb 1-1.1: SerialNumber: 5B8416000133
  431. [ 892.796742] usb 1-1.1: usb_probe_device
  432. [ 892.796769] usb 1-1.1: configuration #1 chosen from 1 choice
  433. [ 892.797114] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
  434. [ 892.797370] usb-storage 1-1.1:1.0: usb_probe_interface
  435. [ 892.797397] usb-storage 1-1.1:1.0: usb_probe_interface - got id
  436. [ 892.798006] scsi0 : usb-storage 1-1.1:1.0
  437. [ 892.806588] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
  438. [ 893.807894] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
  439. [ 894.341971] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
  440. [ 894.350718] sd 0:0:0:0: [sda] Write Protect is off
  441. [ 894.355784] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
  442. [ 894.356498] sd 0:0:0:0: [sda] No Caching mode page present
  443. [ 894.362267] sd 0:0:0:0: [sda] Assuming drive cache: write through
  444. [ 894.372716] sd 0:0:0:0: [sda] No Caching mode page present
  445. [ 894.378526] sd 0:0:0:0: [sda] Assuming drive cache: write through
  446. [ 894.386823] sda:
  447. [ 894.395685] sd 0:0:0:0: [sda] No Caching mode page present
  448. [ 894.401501] sd 0:0:0:0: [sda] Assuming drive cache: write through
  449. [ 894.407869] sd 0:0:0:0: [sda] Attached SCSI removable disk
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!