API tools faq
paste
Advertisement
impro1234

dmesg

impro1234
Sep 21st, 2015
16
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.55 KB | None | 0 0
raw download clone embed print report
  1. fuse init (API version 7.22)
  2. msgmni has been set to 1117
  3. io scheduler noop registered
  4. io scheduler cfq registered (default)
  5. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  6. serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65, base_baud = 5062500) is a 16550A
  7. console [ttyS0] enabled
  8. bootconsole [early0] disabled
  9. serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 16550A
  10. serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 16550A
  11. loop: module loaded
  12. ahci strict-ahci.0: can't get clock
  13. __clk_enable: sata [1]
  14. bcm40nm_pm_sata_enable 00
  15. ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
  16. ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  17. ahci strict-ahci.0: flags: ncq sntf stag clo slum part
  18. scsi0 : ahci_platform
  19. scsi1 : ahci_platform
  20. ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
  21. ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
  22. brcmstb_nand: NAND controller driver is loaded
  23. __clk_enable: network [1]
  24. __clk_enable: enet [1]
  25. bcm40nm_pm_genet_enable 00
  26. Found PHY at Address 3
  27. bcmgenet: configuring instance #0 for external RGMII
  28. __clk_disable: enet [0]
  29. bcm40nm_pm_genet_disable 00
  30. __clk_disable: network [0]
  31. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  32. ata1: SATA link down (SStatus 0 SControl 300)
  33. __clk_enable: usb [1]
  34. bcm40nm_pm_usb_enable 00
  35. ehci-brcm ehci-brcm.0: Broadcom STB EHCI
  36. ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
  37. ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
  38. ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
  39. hub 1-0:1.0: USB hub found
  40. hub 1-0:1.0: 1 port detected
  41. ehci-brcm ehci-brcm.1: Broadcom STB EHCI
  42. ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
  43. ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
  44. ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
  45. hub 2-0:1.0: USB hub found
  46. hub 2-0:1.0: 1 port detected
  47. ehci-brcm ehci-brcm.2: Broadcom STB EHCI
  48. ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
  49. ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
  50. ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
  51. hub 3-0:1.0: USB hub found
  52. hub 3-0:1.0: 1 port detected
  53. ehci-brcm ehci-brcm.3: Broadcom STB EHCI
  54. ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
  55. ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
  56. ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
  57. hub 4-0:1.0: USB hub found
  58. hub 4-0:1.0: 1 port detected
  59. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  60. ohci-brcm ohci-brcm.0: Broadcom STB OHCI
  61. ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
  62. ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
  63. hub 5-0:1.0: USB hub found
  64. hub 5-0:1.0: 1 port detected
  65. ohci-brcm ohci-brcm.1: Broadcom STB OHCI
  66. ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
  67. ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
  68. ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  69. hub 6-0:1.0: USB hub found
  70. hub 6-0:1.0: 1 port detected
  71. ohci-brcm ohci-brcm.2: Broadcom STB OHCI
  72. ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
  73. ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
  74. hub 7-0:1.0: USB hub found
  75. hub 7-0:1.0: 1 port detected
  76. ohci-brcm ohci-brcm.3: Broadcom STB OHCI
  77. ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
  78. ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
  79. usb 4-1: new high-speed USB device number 2 using ehci-brcm
  80. hub 8-0:1.0: USB hub found
  81. hub 8-0:1.0: 1 port detected
  82. usbcore: registered new interface driver usb-storage
  83. mousedev: PS/2 mouse device common for all mice
  84. i2c /dev entries driver
  85. IR NEC protocol handler initialized
  86. IR RC5(x) protocol handler initialized
  87. IR RC6 protocol handler initialized
  88. IR JVC protocol handler initialized
  89. IR Sony protocol handler initialized
  90. IR RC5 (streamzap) protocol handler initialized
  91. IR SANYO protocol handler initialized
  92. IR MCE Keyboard/mouse protocol handler initialized
  93. usbcore: registered new interface driver btusb
  94. Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  95. sdhci: Secure Digital Host Controller Interface driver
  96. sdhci: Copyright(c) Pierre Ossman
  97. sdhci-pltfm: SDHCI platform and OF driver helper
  98. hidraw: raw HID events driver (C) Jiri Kosina
  99. usbcore: registered new interface driver usbhid
  100. usbhid: USB HID core driver
  101. TCP: cubic registered
  102. NET: Registered protocol family 17
  103. Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  104. Bluetooth: HIDP socket layer initialized
  105. Key type dns_resolver registered
  106. PM: CP0 COUNT/COMPARE frequency does not depend on divisor
  107. EBI CS0: setting up NAND flash (primary)
  108. NAND device: Manufacturer ID: 0x98, Chip ID: 0xda (Toshiba NAND 256MiB 3,3V 8-bit)
  109. NAND device: 256MiB, SLC, page size: 2048, OOB size: 64
  110. brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
  111. Bad block table found at page 131008, version 0x04
  112. Bad block table found at page 130944, version 0x04
  113. nand_read_bbt: bad block at 0x000000700000
  114. nand_read_bbt: bad block at 0x000001aa0000
  115. nand_read_bbt: bad block at 0x0000030c0000
  116. ata2.00: ATA-8: ST9500325AS, 0002BSM1, max UDMA/133
  117. ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  118. nand_read_bbt: bad block at 0x000006b40000
  119. nand_read_bbt: bad block at 0x000007fe0000
  120. ata2.00: configured for UDMA/133
  121. nand_read_bbt: bad block at 0x00000a780000
  122. nand_read_bbt: bad block at 0x00000bfa0000
  123. nand_read_bbt: bad block at 0x00000c260000
  124. nand_read_bbt: bad block at 0x00000de80000
  125. nand_read_bbt: bad block at 0x00000e4e0000
  126. usb-storage 4-1:1.0: USB Mass Storage device detected
  127. scsi 1:0:0:0: Direct-Access ATA ST9500325AS 0002 PQ: 0 ANSI: 5
  128. sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  129. sd 1:0:0:0: [sda] Write Protect is off
  130. sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
  131. sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  132. Creating 4 MTD partitions on "brcmnand.0":
  133. 0x000001f00000-0x000010000000 : "rootfs"
  134. sd 1:0:0:0: Attached scsi generic sg0 type 0
  135. scsi2 : usb-storage 4-1:1.0
  136. 0x000001f00000-0x000010000000 : "rootfs(redundant)"
  137. 0x000000200000-0x000000900000 : "kernel"
  138. 0x000000900000-0x000000a00000 : "mac"
  139. UBI: attaching mtd0 to ubi0
  140. sda: sda1
  141. sd 1:0:0:0: [sda] Attached SCSI disk
  142. random: nonblocking pool is initialized
  143. UBI: scanning is finished
  144. UBI: attached mtd0 (name "rootfs", size 225 MiB) to ubi0
  145. UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  146. UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  147. UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
  148. UBI: good PEBs: 1788, bad PEBs: 12, corrupted PEBs: 0
  149. UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
  150. UBI: max/mean erase counter: 443/102, WL threshold: 4096, image sequence number: 1410545289
  151. UBI: available PEBs: 0, total reserved PEBs: 1788, PEBs reserved for bad PEB handling: 28
  152. UBI: background thread "ubi_bgt0d" started, PID 56
  153. ALSA device list:
  154. No soundcards found.
  155. UBIFS: parse sync
  156. UBIFS: background thread "ubifs_bgt0_0" started, PID 59
  157. UBIFS: mounted UBI device 0, volume 0, name "rootfs"
  158. UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  159. UBIFS: FS size: 221573120 bytes (211 MiB, 1745 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
  160. UBIFS: reserved for root: 0 bytes (0 KiB)
  161. UBIFS: media format: w4/r0 (latest is w4/r0), UUID 3D2E856C-BB33-4DFA-A02F-F2905FA8410D, small LPT model
  162. VFS: Mounted root (ubifs filesystem) on device 0:12.
  163. devtmpfs: mounted
  164. Freeing unused kernel memory: 248K (807e2000 - 80820000)
  165. scsi 2:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 4
  166. sd 2:0:0:0: Attached scsi generic sg1 type 0
  167. sd 2:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
  168. sd 2:0:0:0: [sdb] Write Protect is off
  169. sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
  170. sd 2:0:0:0: [sdb] No Caching mode page found
  171. sd 2:0:0:0: [sdb] Assuming drive cache: write through
  172. sd 2:0:0:0: [sdb] No Caching mode page found
  173. sd 2:0:0:0: [sdb] Assuming drive cache: write through
  174. sdb: sdb1
  175. sd 2:0:0:0: [sdb] No Caching mode page found
  176. sd 2:0:0:0: [sdb] Assuming drive cache: write through
  177. sd 2:0:0:0: [sdb] Attached SCSI removable disk
  178. EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  179. FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  180. procmk_init
  181. dvb_bcm7356: module license 'Proprietary' taints kernel.
  182. Disabling lock debugging due to kernel taint
  183. DVB: registering new adapter (vusolo2)
  184. bcm7356: hotplug_callback():
  185. Hotplug - status.connected 1:0
  186. bcm7356: hotplug_callback():
  187. Hotplug - connecting HDMI to display 0xe
  188. [GP]:brcm_pwm_init
  189.  
  190. bcm7356: hotplug_callback():
  191. Hotplug - status.connected 1:1
  192. brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
  193. [MPVR]: >> misc_pvr_init
  194. [VID]: 6bcm7335_video_init
  195. [AUD]: 6bcm7335_audio_init
  196. BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
  197. BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
  198. BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
  199. BKNI_Malloc(linuxkernel) top users:
  200. blocks, bytes, filename:line
  201. 1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
  202. 675, 156228, BSEAV/lib/utils/balloc.c:31
  203. 384, 24576, magnum/commonutils/mrc/src/bmrc_monitor.c:666
  204. input: dreambox advanced remote control (native) as /devices/virtual/input/input0
  205. [LCD]: registered
  206. 0:0
  207. [CI]: registered ci0
  208. [DFP]: registered dbox fp
  209. [DFP]: Scart 9597 is found 4
  210.  
  211. [SC]: registered sci0
  212. [SC]: registered sci1
  213. system_time_set wakeup mode get
  214. system_time_set wakeup mode get 0xc5
  215. fpga update driver loaded
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!