Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2014.10-rc2-svn7248 (Jan 12 2015 - 10:58:17)
- TEGRA124
- Board: NVIDIA Jetson TK1
- I2C: ready
- DRAM: 2 GiB
- MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
- *** Warning - bad CRC, using default environment
- tegra-pcie: PCI regions:
- tegra-pcie: I/O: 0x12000000-0x12010000
- tegra-pcie: non-prefetchable memory: 0x13000000-0x20000000
- tegra-pcie: prefetchable memory: 0x20000000-0x40000000
- tegra-pcie: 2x1, 1x1 configuration
- W�֖��pcie: probing port 0, using 2 lanes
- tegra-pcie: link 0 down, retrying
- tegra-pcie: link 0 down, retrying
- tegra-pcie: link 0 down, retrying
- tegra-pcie: link 0 down, ignoring
- tegra-pcie: probing port 1, using 1 lanes
- In: serial
- Out: serial
- Err: serial
- Net: RTL8169#0
- Warning: RTL8169#0 using MAC address from net device
- Hit any key to stop autoboot: 0
- MMC: no card present
- switch to partitions #0, OK
- mmc0(part 0) is current device
- Scanning mmc 0...
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- (Re)start USB...
- USB0: USB EHCI 1.10
- scanning bus 0 for devices... 1 USB Device(s) found
- USB1: USB EHCI 1.10
- scanning bus 1 for devices... 1 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- scanning usb for ethernet devices... 0 Ethernet Device(s) found
- USB device 0: unknown device
- missing environment variable: pxeuuid
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/01-00-04-4b-25-b1-71
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename 'pxelinux.cfg/01-00-04-4b-25-b1-71'.
- Load address: 0x90100000
- Loading: *
- TFTP error: 'File not found' (1)
- Not retrying...
- pci_hose_bus_to_phys: invalid physical address
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0A80303
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename 'pxelinux.cfg/C0A80303'.
- Load address: 0x90100000
- Loading: *
- TFTP error: 'File not found' (1)
- Not retrying...
- pci_hose_bus_to_phys: invalid physical address
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0A8030
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename 'pxelinux.cfg/C0A8030'.
- Load address: 0x90100000
- Loading: *
- TFTP error: 'File not found' (1)
- Not retrying...
- pci_hose_bus_to_phys: invalid physical address
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0A803
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename 'pxelinux.cfg/C0A803'.
- Load address: 0x90100000
- Loading: *
- TFTP error: 'File not found' (1)
- Not retrying...
- pci_hose_bus_to_phys: invalid physical address
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0A80
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename 'pxelinux.cfg/C0A80'.
- Load address: 0x90100000
- Loading: *
- TFTP error: 'File not found' (1)
- Not retrying...
- pci_hose_bus_to_phys: invalid physical address
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0A8
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename 'pxelinux.cfg/C0A8'.
- Load address: 0x90100000
- Loading: *
- TFTP error: 'File not found' (1)
- Not retrying...
- pci_hose_bus_to_phys: invalid physical address
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0A
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename 'pxelinux.cfg/C0A'.
- Load address: 0x90100000
- Loading: *
- TFTP error: 'File not found' (1)
- Not retrying...
- pci_hose_bus_to_phys: invalid physical address
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename 'pxelinux.cfg/C0'.
- Load address: 0x90100000
- Loading: *
- TFTP error: 'File not found' (1)
- Not retrying...
- pci_hose_bus_to_phys: invalid physical address
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename 'pxelinux.cfg/C'.
- Load address: 0x90100000
- Loading: *
- TFTP error: 'File not found' (1)
- Not retrying...
- pci_hose_bus_to_phys: invalid physical address
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/default-arm-tegra124
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename 'pxelinux.cfg/default-arm-tegra124'.
- Load address: 0x90100000
- Loading: *
- TFTP error: 'File not found' (1)
- Not retrying...
- pci_hose_bus_to_phys: invalid physical address
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/default-arm
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename 'pxelinux.cfg/default-arm'.
- Load address: 0x90100000
- Loading: *
- TFTP error: 'File not found' (1)
- Not retrying...
- pci_hose_bus_to_phys: invalid physical address
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/default
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename 'pxelinux.cfg/default'.
- Load address: 0x90100000
- Loading: #
- 886.7 KiB/s
- done
- Bytes transferred = 908 (38c hex)
- Config file found
- Jetson-TK1 NFS boot options
- 1: primary kernel
- Enter choice: 1: primary kernel
- missing environment variable: bootfile
- Retrieving file: /zImage
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename '/zImage'.
- Load address: 0x81000000
- Loading: #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #
- 3.9 MiB/s
- done
- Bytes transferred = 5737608 (578c88 hex)
- append: console=ttyS0,115200n8 console=tty1 no_console_suspend=1 lp0_vec=2064@0xf46ff000 mem=2015M@2048M memtype=255 ddr_die=2048M@2048M
- section=256M pmuboard=0x0177:0x0000:0x02:0x43:0x00 tsec=32M@3913M otf_key=c75e5bb91eb3bd947560357b64422f85 usbcore.old_scheme_first=1 c
- ore_edp_mv=1150 core_edp_ma=4000 tegraid=40.1.1.0.0 debug_uartport=lsport,3 power_supply=Adapter audio_codec=rt5640 modem_id=0 android.k
- erneltype=normal fbcon=map:1 commchip_id=0 usb_port_owner_info=0 lane_owner_info=6 emc_max_dvfs=0 touch_id=0@0 board_info=0x0177:0x0000:
- 0x02:0x43:0x00 root=/dev/nfs rw netdevwait ip=192.168.3.3:192.168.3.1:192.168.3.1:255.255.255.0::eth0:off nfsroot=192.168.3.1:/home/enew
- nham/tegraTarget/mrirootfs/ rootwait
- missing environment variable: bootfile
- Retrieving file: /tegra124-jetson_tk1-pm375-000-c00-00.dtb
- Using RTL8169#0 device
- TFTP from server 192.168.3.1; our IP address is 192.168.3.3
- Filename '/tegra124-jetson_tk1-pm375-000-c00-00.dtb'.
- Load address: 0x82000000
- Loading: ####
- 3.9 MiB/s
- done
- Bytes transferred = 56739 (dda3 hex)
- Kernel image @ 0x81000000 [ 0x000000 - 0x578c88 ]
- ## Flattened Device Tree blob at 82000000
- Booting using the fdt blob at 0x82000000
- Using Device Tree in place at 82000000, end 82010da2
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.24 (enewnham@arch) (gcc version 4.8.3 20140401 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.04 -
- Linaro GCC 4.8-2014.04) ) #1 SMP PREEMPT Mon Jan 12 12:14:37 EST 2015
- [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- [ 0.000000] Machine: jetson-tk1, model: NVIDIA Tegra124 PM375, serial: 0
- [ 0.000000] Truncating memory at 0x80000000 to fit in 32-bit physical address space
- [ 0.000000] Found tsec, start=0xf4900000 size=2000000
- [ 0.000000] Tegra reserved memory:
- [ 0.000000] LP0: f46ff000 - f46ff80f
- [ 0.000000] Bootloader framebuffer: 00000000 - 00000000
- [ 0.000000] Bootloader framebuffer2: 00000000 - 00000000
- [ 0.000000] Framebuffer: f8900000 - f9afffff
- [ 0.000000] 2nd Framebuffer: f9b00000 - fdefffff
- [ 0.000000] Carveout: 00000000 - 00000000
- [ 0.000000] Vpr: 00000000 - 00000000
- [ 0.000000] Tsec: f4900000 - f68fffff
- [ 0.000000] cma: CMA: reserved 16 MiB at ae800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] DTS File Name: arch/arm/boot/dts/tegra124-jetson_tk1-pm375-000-c00-00.dts
- [ 0.000000] Tegra12: CPU Speedo value 2349, Soc Speedo value 2327, Gpu Speedo value 2118
- [ 0.000000] Tegra12: CPU Speedo ID 1, Soc Speedo ID 1, Gpu Speedo ID 1
- [ 0.000000] Tegra12: CPU Process ID 1,Soc Process ID 1,Gpu Process ID 1
- [ 0.000000] Tegra Revision: A01 SKU: 0x81 CPU Process: 1 Core Process: 1
- [ 0.000000] tegra: PLLP fixed rate: 408000000
- [ 0.000000] pll_d2: val=00583201 m=1 n=50 p_div=5 input_rate=12000000
- [ 0.000000] pll_c4: val=00583201 m=1 n=50 p_div=5 input_rate=12000000
- [ 0.000000] pll_dp: val=00583201 m=1 n=50 p_div=5 input_rate=12000000
- [ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1092000000
- [ 0.000000] Lowering sbus maximum rate from 408000000 to 384000000
- [ 0.000000] Lowering vic03 maximum rate from 900000000 to 828000000
- [ 0.000000] Lowering tsec maximum rate from 900000000 to 828000000
- [ 0.000000] Lowering msenc maximum rate from 600000000 to 528000000
- [ 0.000000] Lowering se maximum rate from 600000000 to 528000000
- [ 0.000000] Lowering vde maximum rate from 600000000 to 528000000
- [ 0.000000] Lowering host1x maximum rate from 500000000 to 444000000
- [ 0.000000] Lowering vi maximum rate from 700000000 to 600000000
- [ 0.000000] Lowering isp maximum rate from 700000000 to 600000000
- [ 0.000000] Lowering c4bus maximum rate from 700000000 to 600000000
- [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
- [ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1066000000
- [ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1066000000
- [ 0.000000] Lowering hdmi maximum rate from 594000000 to 297000000
- [ 0.000000] Lowering nor maximum rate from 127000000 to 102000000
- [ 0.000000] Lowering sdmmc1 maximum rate from 208000000 to 204000000
- [ 0.000000] Lowering sdmmc3 maximum rate from 208000000 to 204000000
- [ 0.000000] Lowering gbus maximum rate from 1032000000 to 852000000
- [ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 2320500000
- [ 0.000000] tegra dvfs: VDD_CPU nominal 1260mV, scaling enabled
- [ 0.000000] tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled
- [ 0.000000] tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] tegra_powergate_init: DONE
- [ 0.000000] tegra12_plle_clk_enable: pll_e is already enabled
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1df2000 s15040 r8192 d13632 u36864
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 492304
- [ 0.000000] Kernel command line: console=ttyS0,115200n8 console=tty1 no_console_suspend=1 lp0_vec=2064@0xf46ff000 mem=2015M@2048M mem
- type=255 ddr_die=2048M@2048M section=256M pmuboard=0x0177:0x0000:0x02:0x43:0x00 tsec=32M@3913M otf_key=c75e5bb91eb3bd947560357b64422f85
- usbcore.old_scheme_first=1 core_edp_mv=1150 core_edp_ma=4000 tegraid=40.1.1.0.0 debug_uartport=lsport,3 power_supply=Adapter audio_codec
- =rt5640 modem_id=0 android.kerneltype=normal fbcon=map:1 commchip_id=0 usb_port_owner_info=0 lane_owner_info=6 emc_max_dvfs=0 touch_id=0
- @0 board_info=0x0177:0x0000:0x02:0x43:0x00 root=/dev/nfs rw netdevwait ip=192.168.3.3:192.168.3.1:192.168.3.1:255.255.255.0::eth0:off nf
- sroot=192.168.3.1:/home/enewnham/tegraTarget/mrirootfs/ rootwait
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 1929MB = 1929MB total
- [ 0.000000] Memory: 1927128k/1927128k available, 136232k reserved, 1197052K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbe800000 - 0xbfe00000 ( 22 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0a6f878 (10655 kB)
- [ 0.000000] .init : 0xc0a70000 - 0xc0aecac0 ( 499 kB)
- [ 0.000000] .data : 0xc0aee000 - 0xc0c2c454 (1274 kB)
- [ 0.000000] .bss : 0xc0c2c454 - 0xc0cb3e3c ( 543 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:960
- [ 0.000000] the number of interrupt controllers found is 5
- [ 0.000000] Architected local timer running at 12.00MHz (phys).
- [ 0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
- [ 0.000000] Ignoring duplicate/late registration of read_current_timer delay
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.002945] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=12000
- [ 0.002999] pid_max: default: 32768 minimum: 301
- [ 0.003309] Mount-cache hash table entries: 512
- [ 0.025114] Initializing cgroup subsys debug
- [ 0.025151] Initializing cgroup subsys freezer
- [ 0.025225] CPU: Testing write buffer coherency: ok
- [ 0.025285] ftrace: allocating 29237 entries in 58 pages
- [ 0.062446] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.062491] Setting up static identity map for 0xc0783c48 - 0xc0783cf4
- [ 0.066457] ftrace: Allocated trace_printk buffers
- [ 0.073072] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.076077] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.079106] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.079288] Brought up 4 CPUs
- [ 0.079362] SMP: Total of 4 processors activated.
- [ 0.079379] CPU: All CPU(s) started in SVC mode.
- [ 0.080349] devtmpfs: initialized
- [ 0.087268] CPA: inner cache maint threshold=2097152
- [ 0.089014] pinctrl core: initialized pinctrl subsystem
- [ 0.089355] regulator-dummy: no parameters
- [ 0.090070] NET: Registered protocol family 16
- [ 0.092465] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.092767] tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver
- [ 0.093399] cpuidle: using governor ladder
- [ 0.093417] cpuidle: using governor menu
- [ 0.105623] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default
- [ 0.112280] Wake16 for irq=34
- [ 0.114639] Wake58 for irq=81
- [ 0.114683] Wake41 for irq=129
- [ 0.114698] Wake43 for irq=129
- [ 0.114738] Wake40 for irq=53
- [ 0.114751] Wake42 for irq=53
- [ 0.118790] board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x03:0x45:0x00
- [ 0.118871] Selecting UARTD as the debug console
- [ 0.118909] The debug console clock name is uartd
- [ 0.119326] ardbeg_modem_init: modem_id = 0
- [ 0.121101] laguna_as3722_regulator_init: i2c_register_board_info
- [ 0.121654] Clear bootloader IO dpd settings
- [ 0.121733] Loading jetson TK1 EMC tables.
- [ 0.121957] tegra: pll_m is selected as scalable EMC clock source
- [ 0.121997] Lowering emc maximum rate from 1200000000 to 924000000
- [ 0.122021] tegra: validated EMC DFS table
- [ 0.122162] laguna_edp_init: CPU regulator 15000 mA
- [ 0.450909] laguna_edp_init: GPU regulator 8000 mA
- [ 0.450940] swapper/0 isomgr_init(): iso emc max clk=924000KHz
- [ 0.450957] swapper/0 isomgr_init(): max_iso_bw=6504960KB[ 0.989788] platform tegradc.0: IOVA linear map 0xf8900000(1200000)
- [ 0.992649] platform tegradc.0: IOVA linear map 0xf9b00000(4400000)
- [ 0.996945] platform tegradc.1: IOVA linear map 0xf8900000(1200000)
- [ 0.999791] platform tegradc.1: IOVA linear map 0xf9b00000(4400000)
- [ 1.000410] soctherm THERMTRIP is not supported on this PMIC
- [ 1.000579] tegra11_soctherem_oc_int_init(): OC interrupts enabled successful
- [ 1.001063] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 1.001090] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 1.001203] mc-err: Started MC error interface!
- [ 1.011536] bio: create slab <bio-0> at 0
- [ 1.013003] reg-fixed-voltage 0.regulator: Consumer c1 does not have device name
- [ 1.013034] reg-fixed-voltage 0.regulator: Consumer c2 does not have device name
- [ 1.013160] vdd-ac-bat: 8400 mV
- [ 1.013292] reg-fixed-voltage 1.regulator: Consumer c1 does not have device name
- [ 1.013321] reg-fixed-voltage 1.regulator: Consumer c2 does not have device name
- [ 1.013441] vdd-3v3-aon: 3300 mV
- [ 1.013594] reg-fixed-voltage 8.regulator: Consumer c1 does not have device name
- [ 1.013622] reg-fixed-voltage 8.regulator: Consumer c2 does not have device name
- [ 1.013648] reg-fixed-voltage 8.regulator: Consumer c3 does not have device name
- [ 1.013679] reg-fixed-voltage 8.regulator: Consumer c6 does not have device name
- [ 1.013706] reg-fixed-voltage 8.regulator: Consumer c7 does not have device name
- [ 1.013732] reg-fixed-voltage 8.regulator: Consumer c8 does not have device name
- [ 1.013758] reg-fixed-voltage 8.regulator: Consumer c9 does not have device name
- [ 1.013785] reg-fixed-voltage 8.regulator: Consumer c10 does not have device name
- [ 1.013812] reg-fixed-voltage 8.regulator: Consumer c11 does not have device name
- [ 1.013838] reg-fixed-voltage 8.regulator: Consumer c12 does not have device name
- [ 1.013962] reg-3v3-supply: 3300 mV
- [ 1.015584] vgaarb: loaded
- [ 1.016211] SCSI subsystem initialized
- [ 1.016581] usbcore: registered new interface driver usbfs
- [ 1.016643] usbcore: registered new interface driver hub
- [ 1.016742] usbcore: registered new device driver usb
- [ 1.018896] as3722 4-0040: AS3722 with revision 0x1 found
- [ 1.023782] as3722_sd0: 700 <--> 1300 mV at 1000 mV 3500 mA normal standby
- [ 1.024951] as3722_sd1: 700 <--> 1350 mV at 1000 mV 2500 mA normal standby
- [ 1.025308] as3722_sd2: 1350 mV normal standby
- [ 1.025611] as3722-sd3: no parameters
- [ 1.025916] as3722_sd4: 1050 mV normal standby
- [ 1.026538] as3722_sd5: 1800 mV normal standby
- [ 1.026874] as3722_sd6: applied init 1000000uV constraint
- [ 1.027462] as3722_sd6: 650 <--> 1200 mV at 1000 mV 3500 mA normal standby
- [ 1.027796] as3722_ldo0: 1050 <--> 1225 mV at 1050 mV at 300 mA normal standby
- [ 1.027850] as3722_ldo0: supplied by as3722_sd2
- [ 1.029246] as3722_ldo1: 1800 mV at 150 mA normal standby
- [ 1.030087] as3722_ldo2: 1200 mV at 150 mA normal standby
- [ 1.030144] as3722_ldo2: supplied by as3722_sd5
- [ 1.031141] as3722_ldo3: 800 mV at 150 mA normal standby
- [ 1.031600] as3722_ldo4: 2700 mV at 150 mA normal standby
- [ 1.032055] as3722_ldo5: 1200 mV at 150 mA normal standby
- [ 1.032107] as3722_ldo5: supplied by as3722_sd5
- [ 1.032455] as3722_ldo6: 1800 <--> 3300 mV at 150 mA normal standby
- [ 1.032907] as3722_ldo7: 1050 mV at 150 mA normal standby
- [ 1.032965] as3722_ldo7: supplied by as3722_sd5
- [ 1.034075] as3722_ldo9: 3300 mV at 150 mA normal standby
- [ 1.034530] as3722_ldo10: 2700 mV at 150 mA normal standby
- [ 1.034995] as3722_ldo11: 1800 mV at 150 mA normal standby
- [ 1.035998] i2c i2c-4: Failed to register i2c client as3722 at 0x40 (-16)
- [ 1.036023] i2c i2c-4: of_i2c: Failure registering /i2c@7000d000/as3722@40
- [ 1.036568] Linux video capture interface: v2.00
- [ 1.037609] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.038462] fixed_reg_battery: 8400 mV normal standby
- [ 1.038510] reg-fixed-voltage reg-fixed-voltage.0: Failed to set supply vdd_sys_bl
- [ 1.038615] reg-fixed-voltage reg-fixed-voltage.0: Failed to register regulator: -16
- [ 1.038647] reg-fixed-voltage: probe of reg-fixed-voltage.0 failed with error -16
- [ 1.038853] fixed_reg_aon_1v8: 1800 mV normal standby
- [ 1.039120] fixed_reg_aon_3v3: 3300 mV normal standby
- [ 1.039163] reg-fixed-voltage reg-fixed-voltage.2: Failed to set supply vdd_3v3_emmc
- [ 1.039263] reg-fixed-voltage reg-fixed-voltage.2: Failed to register regulator: -16
- [ 1.039295] reg-fixed-voltage: probe of reg-fixed-voltage.2 failed with error -16
- [ 1.039519] fixed_reg_aon_1v2: 1200 mV normal standby
- [ 1.039782] fixed_reg_vdd_hdmi_5v0: 5000 mV normal standby
- [ 1.040044] fixed_reg_vdd_hdmi: 3300 mV normal standby
- [ 1.040081] fixed_reg_vdd_hdmi: supplied by as3722_sd4
- [ 1.040381] fixed_reg_vdd_lcd_bl: 3300 mV normal standby
- [ 1.040652] fixed_reg_lcd_bl_en: 5000 mV normal standby
- [ 1.040914] fixed_reg_3v3: 3300 mV normal standby
- [ 1.040954] reg-fixed-voltage reg-fixed-voltage.14: Failed to set supply hvdd_pex
- [ 1.041052] reg-fixed-voltage reg-fixed-voltage.14: Failed to register regulator: -16
- [ 1.041083] reg-fixed-voltage: probe of reg-fixed-voltage.14 failed with error -16
- [ 1.041285] fixed_reg_5v0: 5000 mV normal standby
- [ 1.041562] fixed_reg_dcdc_1v8: 1800 mV normal standby
- [ 1.042175] fixed_reg_as3722_gpio2: 3300 mV normal standby
- [ 1.042868] fixed_reg_lcd: 3300 mV normal standby
- [ 1.043138] fixed_reg_sdmmc_en: 3300 mV normal standby
- [ 1.043436] fixed_reg_vdd_cdc_1v2_aud_pm375: 1200 mV normal standby
- [ 1.043705] fixed_reg_usb2_vbus_pm359: 5000 mV normal standby
- [ 1.044000] fixed_reg_usb0_usb1_vbus_pm359: 5000 mV normal standby
- [ 1.044373] usb0-vbus: 5000 mV
- [ 1.044432] reg-fixed-sync-voltage 2.regulator: Failed to set supply usb_vbus
- [ 1.044541] reg-fixed-sync-voltage 2.regulator: Failed to register regulator: -16
- [ 1.044573] reg-fixed-sync-voltage: probe of 2.regulator failed with error -16
- [ 1.044767] usb1-usb2-vbus: 5000 mV
- [ 1.044802] reg-fixed-sync-voltage 3.regulator: Failed to set supply usb_vbus
- [ 1.044905] reg-fixed-sync-voltage 3.regulator: Failed to register regulator: -16
- [ 1.044936] reg-fixed-sync-voltage: probe of 3.regulator failed with error -16
- [ 1.045121] vdd-hdmi: 5000 mV
- [ 1.045162] reg-fixed-sync-voltage 4.regulator: Failed to set supply vdd_hdmi_5v0
- [ 1.045267] reg-fixed-sync-voltage 4.regulator: Failed to register regulator: -16
- [ 1.045298] reg-fixed-sync-voltage: probe of 4.regulator failed with error -16
- [ 1.045503] avdd-hdmi-pll: 3300 mV
- [ 1.045568] reg-fixed-sync-voltage 5.regulator: Failed to find supply vin
- [ 1.045667] reg-fixed-sync-voltage 5.regulator: Failed to register regulator: -517
- [ 1.045701] platform 5.regulator: Driver reg-fixed-sync-voltage requests probe deferral
- [ 1.045783] reg-fixed-sync-voltage 6.regulator: Consumer c1 does not have device name
- [ 1.045912] vdd-lcd-bl: 3300 mV
- [ 1.045950] reg-fixed-sync-voltage 6.regulator: Failed to set supply vdd_lcd_bl
- [ 1.046053] reg-fixed-sync-voltage 6.regulator: Failed to register regulator: -16
- [ 1.046084] reg-fixed-sync-voltage: probe of 6.regulator failed with error -16
- [ 1.046193] reg-fixed-sync-voltage 7.regulator: Consumer c1 does not have device name
- [ 1.046321] vdd-lcd-bl-en: 5000 mV
- [ 1.046358] reg-fixed-sync-voltage 7.regulator: Failed to set supply vdd_lcd_bl_en
- [ 1.046482] reg-fixed-sync-voltage 7.regulator: Failed to register regulator: -16
- [ 1.046514] reg-fixed-sync-voltage: probe of 7.regulator failed with error -16
- [ 1.046600] reg-fixed-sync-voltage 9.regulator: Consumer c3 does not have device name
- [ 1.046715] reg-5v0-supply: 5000 mV
- [ 1.046752] reg-fixed-sync-voltage 9.regulator: Failed to set supply spkvdd
- [ 1.046851] reg-fixed-sync-voltage 9.regulator: Failed to register regulator: -16
- [ 1.046882] reg-fixed-sync-voltage: probe of 9.regulator failed with error -16
- [ 1.046973] reg-fixed-sync-voltage a.regulator: Consumer c1 does not have device name
- [ 1.047002] reg-fixed-sync-voltage a.regulator: Consumer c2 does not have device name
- [ 1.047030] reg-fixed-sync-voltage a.regulator: Consumer c3 does not have device name
- [ 1.047070] reg-fixed-sync-voltage a.regulator: Consumer c10 does not have device name
- [ 1.047097] reg-fixed-sync-voltage a.regulator: Consumer c11 does not have device name
- [ 1.047124] reg-fixed-sync-voltage a.regulator: Consumer c12 does not have device name
- [ 1.047151] reg-fixed-sync-voltage a.regulator: Consumer c13 does not have device name
- [ 1.047177] reg-fixed-sync-voltage a.regulator: Consumer c14 does not have device name
- [ 1.047204] reg-fixed-sync-voltage a.regulator: Consumer c15 does not have device name
- [ 1.047340] reg-1v8-supply: 1800 mV
- [ 1.047374] reg-fixed-sync-voltage a.regulator: Failed to set supply avdd_lvds0_pll
- [ 1.047495] reg-fixed-sync-voltage a.regulator: Failed to register regulator: -16
- [ 1.047527] reg-fixed-sync-voltage: probe of a.regulator failed with error -16
- [ 1.047605] reg-fixed-sync-voltage b.regulator: Consumer c1 does not have device name
- [ 1.047733] reg-dcdc-1v2: 1200 mV
- [ 1.047896] reg-fixed-sync-voltage c.regulator: Consumer c7 does not have device name
- [ 1.047925] reg-fixed-sync-voltage c.regulator: Consumer c8 does not have device name
- [ 1.047982] platform c.regulator: Driver reg-fixed-sync-voltage requests probe deferral
- [ 1.048063] reg-fixed-sync-voltage d.regulator: Consumer c1 does not have device name
- [ 1.048117] platform d.regulator: Driver reg-fixed-sync-voltage requests probe deferral
- [ 1.048303] sdmmc-en-supply: 3300 mV
- [ 1.048339] reg-fixed-sync-voltage e.regulator: Failed to set supply vddio_sd_slot
- [ 1.048463] reg-fixed-sync-voltage e.regulator: Failed to register regulator: -16
- [ 1.048496] reg-fixed-sync-voltage: probe of e.regulator failed with error -16
- [ 1.048678] vdd-cdc-1v2-aud: 1200 mV
- [ 1.048714] reg-fixed-sync-voltage f.regulator: Failed to set supply ldoen
- [ 1.048816] reg-fixed-sync-voltage f.regulator: Failed to register regulator: -16
- [ 1.048847] reg-fixed-sync-voltage: probe of f.regulator failed with error -16
- [ 1.048927] reg-fixed-sync-voltage 10.regulator: Consumer c1 does not have device name
- [ 1.048956] reg-fixed-sync-voltage 10.regulator: Consumer c2 does not have device name
- [ 1.048983] reg-fixed-sync-voltage 10.regulator: Consumer c3 does not have device name
- [ 1.049097] reg-aon-1v8: 1800 mV
- [ 1.049133] reg-fixed-sync-voltage 10.regulator: Failed to set supply vdd_1v8_emmc
- [ 1.049234] reg-fixed-sync-voltage 10.regulator: Failed to register regulator: -16
- [ 1.049265] reg-fixed-sync-voltage: probe of 10.regulator failed with error -16
- [ 1.049343] reg-fixed-sync-voltage 11.regulator: Consumer c1 does not have device name
- [ 1.049475] reg-aon-1v2: 1200 mV
- [ 1.049512] reg-fixed-sync-voltage 11.regulator: Failed to set supply vdd_1v2_bb_hsic
- [ 1.049614] reg-fixed-sync-voltage 11.regulator: Failed to register regulator: -16
- [ 1.049644] reg-fixed-sync-voltage: probe of 11.regulator failed with error -16
- [ 1.051599] as3722-adc-extcon as3722-adc-extcon.2: USB-Host is disconnected
- [ 1.054892] tegra: started io power detection dynamic control
- [ 1.054913] tegra: NO_IO_POWER setting 0x0
- [ 1.054931] Switching to clocksource arch_sys_counter
- [ 1.075084] nvmap_heap_init: nvmap_heap_init: created heap block cache
- [ 1.075270] nvmap uc page pool size=60734 pages
- [ 1.097309] nvmap pool = uc, highmem=25600, pool_size=60734,totalram=485878, freeram=457277, totalhigh=299263, freehigh=273531
- [ 1.098027] nvmap wc page pool size=60734 pages
- [ 1.120043] nvmap pool = wc, highmem=25600, pool_size=60734,totalram=485878, freeram=431547, totalhigh=299263, freehigh=247801
- [ 1.121270] misc nvmap: created heap iram base 0x40001000 size (252KiB)
- [ 1.121419] nvmap:inner cache maint threshold=2097152
- [ 1.130491] Wake39 for irq=52
- [ 1.130576] tegra-otg tegra-otg: otg transceiver registered
- [ 1.130867] NET: Registered protocol family 2
- [ 1.131552] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 1.131751] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 1.131938] TCP: Hash tables configured (established 8192 bind 8192)
- [ 1.132013] TCP: reno registered
- [ 1.132035] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.132087] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.132407] NET: Registered protocol family 1
- [ 1.132782] RPC: Registered named UNIX socket transport module.
- [ 1.132804] RPC: Registered udp transport module.
- [ 1.132820] RPC: Registered tcp transport module.
- [ 1.132836] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.137665] host1x host1x: initialized
- [ 1.138939] CPU PMU: probing PMU on CPU 0
- [ 1.138969] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
- [ 1.139828] tegra_throttle : init passed
- [ 1.139922] Tegra cpuquiet initialized: disabled
- [ 1.140073] cpu-tegra: init EDP limit: 2320 MHz
- [ 1.140920] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm
- [ 1.141229] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm
- [ 1.141453] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type MEM-therm
- [ 1.141664] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
- [ 1.143354] bounce pool size: 64 pages
- [ 1.144574] NTFS driver 2.1.30 [Flags: R/O].
- [ 1.144712] fuse init (API version 7.22)
- [ 1.144923] msgmni has been set to 1457
- [ 1.146333] io scheduler noop registered (default)
- [ 1.347748] PCIE: port 0: link down, retrying
- [ 1.547793] PCIE: port 0: link down, retrying
- [ 1.747833] PCIE: port 0: link down, retrying
- [ 1.747851] PCIE: port 0: link down, ignoring
- [ 1.753033] PCI host bridge to bus 0000:00
- [ 1.753058] pci_bus 0000:00: root bus resource [mem 0x32100000-0x3fffffff]
- [ 1.753083] pci_bus 0000:00: root bus resource [mem 0x12100000-0x320fffff pref]
- [ 1.753110] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
- [ 1.753133] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 1.753541] PCI: bus0: Fast back to back transfers disabled
- [ 1.753566] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.756042] PCI: bus1: Fast back to back transfers disabled
- [ 1.756386] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
- [ 1.756412] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
- [ 1.756667] pcieport 0000:00:00.0: BAR 8: assigned [mem 0x32100000-0x321fffff]
- [ 1.756697] pcieport 0000:00:00.0: BAR 9: assigned [mem 0x12100000-0x121fffff 64bit pref]
- [ 1.756726] pcieport 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff]
- [ 1.756754] pci 0000:01:00.0: BAR 4: assigned [mem 0x12100000-0x12103fff 64bit pref]
- [ 1.756800] pci 0000:01:00.0: BAR 2: assigned [mem 0x32100000-0x32100fff 64bit]
- [ 1.756844] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
- [ 1.756872] pcieport 0000:00:00.0: PCI bridge to [bus 01]
- [ 1.756895] pcieport 0000:00:00.0: bridge window [io 0x1000-0x1fff]
- [ 1.756921] pcieport 0000:00:00.0: bridge window [mem 0x32100000-0x321fffff]
- [ 1.756948] pcieport 0000:00:00.0: bridge window [mem 0x12100000-0x121fffff 64bit pref]
- [ 1.757012] PCIE: No Link speed change happened
- [ 1.757509] pwm-backlight pwm-backlight: unable to request PWM, trying legacy API
- [ 1.757608] sysedp_create_consumer: unable to create pwm-backlight, no consumer_data for pwm-backlight found
- [ 1.759262] msenc msenc: initialized
- [ 1.760177] tsec tsec: initialized
- [ 1.762167] isp isp.0: initialized
- [ 1.763125] isp isp.1: initialized
- [ 1.764692] vic03 vic03.0: initialized
- [ 1.766370] gk20a gk20a.0: initialized
- [ 1.767268] tegradc tegradc.0: DSI: Failed to get chip info
- [ 1.767351] tegradc tegradc.0: DSI: HS clock rate is 464500
- [ 1.768975] p,wuxga-10-1 panel dt support not available
- [ 2.049575] tegradc tegradc.0: nominal-pclk:154700000 parent:154500000 div:1.0 pclk:154500000 153153000~168623000
- [ 2.138150] tegradc tegradc.0: DSI pad calibration done
- [ 2.144676] tegradc tegradc.0: probed
- [ 2.145074] tegradc tegradc.0: probed
- [ 2.145259] tegradc tegradc.0: nominal-pclk:154679000 parent:463500000 div:3.0 pclk:154500000 153132210~168600110
- [ 2.167245] gpio wake4 for gpio=111
- [ 2.182245] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
- [ 2.183577] tegradc tegradc.1: probed
- [ 2.248727] Console: switching to colour frame buffer device 240x67
- [ 2.309277] tegradc tegradc.1: probed
- [ 2.309604] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
- [ 2.317552] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
- [ 2.381606] hdmi_state_machine_worker (tid edafd080): state 0 (Reset), hpd 1, pending_hpd_evt 1
- [ 2.382046] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 0 (Reset)
- [ 2.385718] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels
- [ 2.386783] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 2.388243] serial8250.0: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra
- [ 2.422035] hdmi_state_machine_worker (tid edafd080): state 0 (Reset), hpd 1, pending_hpd_evt 0
- [ 2.422040] hdmi_disable_l: audio_switch 0
- [ 2.422043] hdmi_disable_l: hpd_switch 0
- [ 2.422049] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug)
- [ 2.432029] hdmi_state_machine_worker (tid edafd080): state 1 (Check Plug), hpd 1, pending_hpd_evt 0
- [ 2.432035] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID)
- [ 2.492032] hdmi_state_machine_worker (tid edafd080): state 2 (Check EDID), hpd 1, pending_hpd_evt 0
- [ 2.505082] panel size 48 by 27
- [ 4.775006] console [ttyS0] enabled
- [ 4.775581] serial-tegra.0: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA
- [ 4.775858] serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
- [ 4.776140] serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
- [ 4.779832] loop: module loaded
- [ 4.780167] nct1008_nct72 0-004c: success in enabling rail vdd_nct72
- [ 4.783223] gpio wake35 for gpio=70
- [ 4.783289] nct1008_nct72 0-004c: nct1008_probe: initialized
- [ 4.783861] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra
- [ 4.788074] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
- [ 4.790416] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0
- [ 4.791682] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode
- [ 4.791695] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pio slum part sadm sds apst
- [ 4.792868] scsi0 : tegra-sata
- [ 4.793267] scsi1 : tegra-sata
- [ 4.793479] ata1: SATA max UDMA/133 irq 55
- [ 4.793482] ata2: DUMMY
- [ 4.795396] tun: Universal TUN/TAP device driver, 1.6
- [ 4.795399] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 4.795637] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 4.797833] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf0190000, 00:04:4b:25:b1:71, XID 0c000800 IRQ 641
- [ 4.797840] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 4.797935] PPP generic driver version 2.4.2
- [ 4.798114] PPP BSD Compression module registered
- [ 4.798118] PPP Deflate Compression module registered
- [ 4.798131] PPP MPPE Compression module registered
- [ 4.798137] NET: Registered protocol family 24
- [ 4.798201] usbcore: registered new interface driver asix
- [ 4.798245] usbcore: registered new interface driver ax88179_178a
- [ 4.798282] usbcore: registered new interface driver cdc_ether
- [ 4.798334] usbcore: registered new interface driver smsc95xx
- [ 4.798377] usbcore: registered new interface driver cdc_subset
- [ 4.798442] usbcore: registered new interface driver cdc_ncm
- [ 4.798460] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.798672] tegra USB phy - inst[1] platform info:
- [ 4.798675] port_otg: no
- [ 4.798678] has_hostpc: yes
- [ 4.798681] phy_interface: USB_PHY_INTF_UTMI
- [ 4.798683] op_mode: TEGRA_USB_OPMODE_HOST
- [ 4.798687] vbus_gpio: -1
- [ 4.798689] hot_plug: disabled
- [ 4.798692] remote_wakeup: enabled
- [ 4.800200] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
- [ 4.800224] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
- [ 4.800335] Wake40 for irq=53
- [ 4.800338] Wake42 for irq=53
- [ 4.800360] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
- [ 4.806025] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.10
- [ 4.806121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 4.806128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.806135] usb usb1: Product: Tegra EHCI Host Controller
- [ 4.806141] usb usb1: Manufacturer: Linux 3.10.24 ehci_hcd
- [ 4.806146] usb usb1: SerialNumber: tegra-ehci.1
- [ 4.806665] hub 1-0:1.0: USB hub found
- [ 4.806684] hub 1-0:1.0: 1 port detected
- [ 4.807045] tegra USB phy - inst[2] platform info:
- [ 4.807048] port_otg: no
- [ 4.807051] has_hostpc: yes
- [ 4.807054] phy_interface: USB_PHY_INTF_UTMI
- [ 4.807057] op_mode: TEGRA_USB_OPMODE_HOST
- [ 4.807059] vbus_gpio: -1
- [ 4.807062] hot_plug: disabled
- [ 4.807064] remote_wakeup: enabled
- [ 4.808492] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
- [ 4.808515] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
- [ 4.808615] Wake41 for irq=129
- [ 4.808619] Wake43 for irq=129
- [ 4.808640] tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000
- [ 4.814024] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.10
- [ 4.814100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 4.814107] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.814113] usb usb2: Product: Tegra EHCI Host Controller
- [ 4.814118] usb usb2: Manufacturer: Linux 3.10.24 ehci_hcd
- [ 4.814124] usb usb2: SerialNumber: tegra-ehci.2
- [ 4.814611] hub 2-0:1.0: USB hub found
- [ 4.814629] hub 2-0:1.0: 1 port detected
- [ 4.815027] ehci-pci: EHCI PCI platform driver
- [ 4.815307] tegra_xusb_read_usb_calib: usb_calib0 = 0x0245038b
- [ 4.815563] usbcore: registered new interface driver cdc_acm
- [ 4.815566] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 4.815611] usbcore: registered new interface driver cdc_wdm
- [ 4.815690] usbcore: registered new interface driver usb-storage
- [ 4.815796] usbcore: registered new interface driver usbserial
- [ 4.815836] usbcore: registered new interface driver option
- [ 4.815867] usbserial: USB Serial support registered for GSM modem (1-port)
- [ 4.815971] usbcore: registered new interface driver pl2303
- [ 4.816021] usbserial: USB Serial support registered for pl2303
- [ 4.816035] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
- [ 4.816188] tegra USB phy - inst[0] platform info:
- [ 4.816191] port_otg: yes
- [ 4.816193] has_hostpc: yes
- [ 4.816196] phy_interface: USB_PHY_INTF_UTMI
- [ 4.816198] op_mode: TEGRA_USB_OPMODE_DEVICE
- [ 4.816201] vbus_pmu_irq: 0
- [ 4.816203] vbus_gpio: -1
- [ 4.816206] charging: disabled
- [ 4.816208] remote_wakeup: disabled
- [ 4.818999] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
- [ 4.819118] otg state changed: SUSPEND --> PERIPHERAL
- [ 4.820429] usbcore: registered new interface driver xpad
- [ 4.823176] as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0
- [ 4.823184] as3722-rtc as3722-rtc.1: RTC interrupt 917
- [ 4.825958] i2c /dev entries driver
- [ 4.829118] nvavp nvavp: allocated IOVA at 8ff00000 for AVP os
- [ 4.829760] tegra_dtv_probe: probing dtv.
- [ 4.830117] setup_stream: bufsize = 4096, bufnum = 4
- [ 4.830117] ar0832_init: ++
- [ 4.830507] i2c-core: driver [max77387] using legacy suspend method
- [ 4.830510] i2c-core: driver [max77387] using legacy resume method
- [ 4.830562] i2c-core: driver [as364x] using legacy suspend method
- [ 4.830565] i2c-core: driver [as364x] using legacy resume method
- [ 4.830717] [IMX135] sensor driver loading
- [ 4.830765] [IMX179] sensor driver loading
- [ 4.830815] [imx132] sensor driver loading
- [ 4.830864] [ar0261] sensor driver loading
- [ 4.831016] usbcore: registered new interface driver uvcvideo
- [ 4.831018] USB Video Class driver (1.1.1)
- [ 4.832552] device-mapper: uevent: version 1.0.3
- [ 4.832814] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 4.833014] sdhci: Secure Digital Host Controller Interface driver
- [ 4.833016] sdhci: Copyright(c) Pierre Ossman
- [ 4.833019] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 4.833368] sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required.
- [ 4.833518] sdhci-tegra sdhci-tegra.3: Speedo value 2327
- [ 4.833526] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
- [ 4.833559] mmc0: no vqmmc regulator found
- [ 4.833575] mmc0: no vmmc regulator found
- [ 4.833580] mmc0: Invalid maximum block size, assuming 512 bytes
- [ 4.855029] sysedp_create_consumer: unable to create sdhci-tegra.3, no consumer_data for sdhci-tegra.3 found
- [ 4.855030] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
- [ 4.855792] sdhci-tegra sdhci-tegra.2: Speedo value 2327
- [ 4.855802] sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
- [ 4.855831] mmc1: no vqmmc regulator found
- [ 4.855974] mmc1: no vmmc regulator found
- [ 4.855995] mmc1: Invalid maximum block size, assuming 512 bytes
- [ 4.878025] sysedp_create_consumer: unable to create sdhci-tegra.2, no consumer_data for sdhci-tegra.2 found
- [ 4.878026] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
- [ 4.878135] gpio wake56 for gpio=170
- [ 4.878207] gpio wake56 for gpio=170
- [ 4.878211] Enabling wake56
- [ 4.881965] tegra-se tegra12-se: tegra_se_probe: complete
- [ 4.884735] usbcore: registered new interface driver usbhid
- [ 4.884738] usbhid: USB HID core driver
- [ 4.899257] mmc0: BKOPS_EN bit is not set
- [ 4.901893] mmc0: new high speed DDR MMC card at address 0001
- [ 4.902153] mmcblk mmc0:0001: Card claimed for testing.
- [ 4.902335] mmcblk0: mmc0:0001 SEM16G 14.6 GiB
- [ 4.902474] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
- [ 4.910103] mmcblk0: p1 p2 p3 p4 p5
- [ 4.991966] usbcore: registered new interface driver snd-usb-audio
- [ 4.992656] MAX98090 driver built on Jan 12 2015 at 12:11:05
- [ 5.104038] ata1: SATA link down (SStatus 0 SControl 300)
- [ 5.267605] rt5639 0-001c: read 0xfd=0x6
- [ 5.282114] rt5639 0-001c: ASoC: mux INR Mux has no paths
- [ 5.282131] rt5639 0-001c: ASoC: mux INL Mux has no paths
- [ 5.283164] gpio wake49 for gpio=143
- [ 5.785028] rt5639 0-001c: rt5639_headset_detect RT5639_PWR_ANLG1(0x63) = 0xa814
- [ 5.785270] rt5639 0-001c: rt5639_headset_detect RT5639_IRQ_CTRL2(0xbe) = 0x0
- [ 5.786334] rt5639 0-001c: rt5639_headset_detect jack_type = 2
- [ 5.786752] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> tegra30-i2s.1 mapping ok
- [ 5.804364] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-spdif mapping ok
- [ 5.805112] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-i2s.3 mapping ok
- [ 5.805807] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> dit-hifi mapping ok
- [ 5.806539] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> dit-hifi mapping ok
- [ 5.809408] input: tegra-rt5639 Headphone Jack as /devices/platform/tegra-snd-rt5639.0/sound/card1/input0
- [ 5.827831] sysedp_create_consumer: unable to create speaker, no consumer_data for speaker found
- [ 5.827832] oprofile: using timer interrupt.
- [ 5.843558] GACT probability NOT on
- [ 5.843567] Mirror/redirect action on
- [ 5.843576] u32 classifier
- [ 5.843578] Actions configured
- [ 5.843585] Netfilter messages via NETLINK v0.30.
- [ 5.843659] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 5.876415] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 5.876418] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 5.890958] xt_time: kernel timezone is -0000
- [ 5.891304] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 5.891456] arp_tables: (C) 2002 David S. Miller
- [ 5.891504] TCP: cubic registered
- [ 6.006069] NET: Registered protocol family 10
- [ 6.056696] mip6: Mobile IPv6
- [ 6.056732] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 6.056880] sit: IPv6 over IPv4 tunneling driver
- [ 6.057903] NET: Registered protocol family 17
- [ 6.057929] NET: Registered protocol family 15
- [ 6.057955] NET: Registered protocol family 35
- [ 6.089704] NET: Registered protocol family 37
- [ 6.089708] NET: Registered protocol family 41
- [ 6.135845] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
- [ 6.166322] Registering SWP/SWPB emulation handler
- [ 6.166328] last reset is due to power on reset
- [ 6.166328]
- [ 6.166344] Disabling clocks left on by bootloader:
- [ 6.166347] audio_2x
- [ 6.166358] audio
- [ 6.166362] audio4
- [ 6.166366] audio3
- [ 6.166370] audio2
- [ 6.166373] audio1
- [ 6.166377] audio0
- [ 6.166485] hdmi_audio
- [ 6.166491] entropy
- [ 6.166505] dsi2-fixed
- [ 6.166509] dsi1-fixed
- [ 6.166532] nor
- [ 6.166539] trace
- [ 6.166550] sdmmc3_ddr
- [ 6.166602] cclk_lp
- [ 6.166612] pll_x_out0
- [ 6.166628] pll_m_out1
- [ 6.167734] tegra_dvfs: registered vdd_cpu simon notifier
- [ 6.168367] Tegra CPU DFLL is initialized with use_dfll = 1
- [ 6.168494] CPU rate: 696 MHz
- [ 6.169607] cpu_cold cooling device is registered
- [ 6.170080] cpu_hot cooling device is registered
- [ 6.433969] tegra dvfs: tegra sysfs cap interface is initialized
- [ 6.434111] tegra dvfs: tegra sysfs gpu & emc interface is initialized
- [ 6.434117] tegra dvfs: registered vdd_gpu simon notifier
- [ 6.434379] tegra_actmon.emc: Completed initialization (0)
- [ 6.434641] tegra_actmon.avp: Completed initialization (0)
- [ 6.434793] tegra_mon.cpu_emc: Completed initialization (0)
- [ 6.438131] as3722_ldo11: disabling
- [ 6.438317] as3722_ldo10: disabling
- [ 6.438483] as3722_ldo9: disabling
- [ 6.438648] as3722_ldo7: disabling
- [ 6.438812] as3722_ldo6: disabling
- [ 6.438976] as3722_ldo5: disabling
- [ 6.439161] as3722_ldo4: disabling
- [ 6.439326] as3722_ldo1: disabling
- [ 6.439488] as3722-sd3: disabling
- [ 6.440105] avdd-hdmi-pll: 3300 mV
- [ 6.440170] reg-fixed-sync-voltage 5.regulator: Failed to find supply vin
- [ 6.440277] reg-fixed-sync-voltage 5.regulator: Failed to register regulator: -517
- [ 6.440294] platform 5.regulator: Driver reg-fixed-sync-voltage requests probe deferral
- [ 6.440594] reg-fixed-sync-voltage c.regulator: Consumer c7 does not have device name
- [ 6.440602] reg-fixed-sync-voltage c.regulator: Consumer c8 does not have device name
- [ 6.440638] platform c.regulator: Driver reg-fixed-sync-voltage requests probe deferral
- [ 6.440878] reg-fixed-sync-voltage d.regulator: Consumer c1 does not have device name
- [ 6.440910] platform d.regulator: Driver reg-fixed-sync-voltage requests probe deferral
- [ 6.441783] gpio wake51 for gpio=128
- [ 6.442064] input: gpio-keys.4 as /devices/platform/gpio-keys.4/input/input1
- [ 6.442569] avdd-hdmi-pll: 3300 mV
- [ 6.442625] reg-fixed-sync-voltage 5.regulator: Failed to find supply vin
- [ 6.442727] reg-fixed-sync-voltage 5.regulator: Failed to register regulator: -517
- [ 6.442742] platform 5.regulator: Driver reg-fixed-sync-voltage requests probe deferral
- [ 6.443040] reg-fixed-sync-voltage c.regulator: Consumer c7 does not have device name
- [ 6.443049] reg-fixed-sync-voltage c.regulator: Consumer c8 does not have device name
- [ 6.443086] platform c.regulator: Driver reg-fixed-sync-voltage requests probe deferral
- [ 6.443374] reg-fixed-sync-voltage d.regulator: Consumer c1 does not have device name
- [ 6.443407] platform d.regulator: Driver reg-fixed-sync-voltage requests probe deferral
- [ 6.447023] as3722-rtc as3722-rtc.1: setting system clock to 2015-01-12 17:17:07 UTC (1421083027)
- [ 8.795417] handle_check_edid_l: audio_switch 1
- [ 8.809877] Display connected, hpd_switch 1
- [ 8.824086] hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled)
- [ 8.843858] hdmi_state_machine_worker (tid edafd080): state 4 (Enabled), hpd 1, pending_hpd_evt 0
- [ 8.870135] r8169 0000:01:00.0 eth0: link down
- [ 8.870181] r8169 0000:01:00.0 eth0: link down
- [ 8.876334] panel size 48 by 27
- [ 8.913210] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 8.913280] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
- [ 8.917556] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
- [ 9.072912] handle_check_edid_l: audio_switch 0
- [ 9.088459] Display connected, hpd_switch 1
- [ 9.103778] hdmi_state_machine_set_state_l: switching from state 4 (Enabled) to state 4 (Enabled)
- [ 9.124313] hdmi_state_machine_set_state_l: switching from state 4 (Enabled) to state 5 (Wait for HPD reassert)
- [ 10.649041] hdmi_state_machine_worker (tid edafd080): state 5 (Wait for HPD reassert), hpd 1, pending_hpd_evt 0
- [ 10.671295] hdmi_state_machine_set_state_l: switching from state 5 (Wait for HPD reassert) to state 0 (Reset)
- [ 10.693589] hdmi_state_machine_worker (tid edafd080): state 0 (Reset), hpd 1, pending_hpd_evt 0
- [ 10.714859] hdmi_disable_l: audio_switch 0
- [ 10.731580] hdmi_disable_l: hpd_switch 0
- [ 10.748216] HDMI from connected to disconnected
- [ 10.767751] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug)
- [ 10.800015] hdmi_state_machine_worker (tid edafd080): state 1 (Check Plug), hpd 1, pending_hpd_evt 0
- [ 10.822756] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID)
- [ 10.906026] hdmi_state_machine_worker (tid edafd080): state 2 (Check EDID), hpd 1, pending_hpd_evt 0
- [ 10.942317] panel size 48 by 27
- [ 11.023704] handle_check_edid_l: audio_switch 1
- [ 11.042423] Display connected, hpd_switch 1
- [ 11.060730] hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled)
- [ 11.084425] hdmi_state_machine_worker (tid edafd080): state 4 (Enabled), hpd 1, pending_hpd_evt 0
- [ 11.109589] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
- [ 18.913015] Waiting up to 110 more seconds for network.
- [ 21.921185] r8169 0000:01:00.0 eth0: link up
- [ 21.934263] IP-Config: Complete:
- [ 21.934272] device=eth0, hwaddr=00:04:4b:25:b1:71, ipaddr=192.168.3.3, mask=255.255.255.0, gw=192.168.3.1
- [ 21.934278] host=192.168.3.3, domain=, nis-domain=(none)
- [ 21.934287] bootserver=192.168.3.1, rootserver=192.168.3.1, rootpath=
- [ 21.934594] ALSA device list:
- [ 21.934600] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
- [ 21.934603] #1: tegra-rt5639
- [ 22.085124] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 22.127486] VFS: Mounted root (nfs filesystem) on device 0:11.
- [ 22.150123] devtmpfs: mounted
- [ 22.743053] init: plymouth-upstart-bridge main process (114) terminated with status 1
- [ 22.768304] init: plymouth-upstart-bridge main process ended, respawning
- [ 22.900428] init: plymouth-upstart-bridge main process (124) terminated with status 1
- [ 22.925468] init: plymouth-upstart-bridge main process ended, respawning
- [ 22.953336] init: ureadahead main process (117) terminated with status 5
- [ 23.030667] init: plymouth-upstart-bridge main process (127) terminated with status 1
- [ 23.055855] init: plymouth-upstart-bridge main process ended, respawning
- * Stopping Send an event to indicate plymouth is up[ OK ]
- * Starting Mount filesystems on boot[ OK ]
- * Starting Signal sysvinit that the rootfs is mounted[ OK ]
- * Starting Clean /tmp directory[ OK ]
- * Starting Populate and link to /run filesystem[ OK ]
- * Stopping Clean /tmp directory[ OK ]
- * Stopping Populate and link to /run filesystem[ OK ]
- * Stopping Track if upstart is running in a container[ OK ]
- * Starting Initialize or finalize resolvconf[ OK ]
- * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
- * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
- * Starting Bridge udev events into upstart[ OK ]
- * Starting Signal sysvinit that local filesystems are mounted[ OK ]
- * Starting Signal sysvinit that remote filesystems are mounted[ OK ]
- * Stopping Mount filesystems on boot[ OK ]
- * Starting device node and kernel event manager[ OK ]
- * Starting flush early job output to logs[ OK ]
- * Starting NVIDIA specific init script[ OK ]
- * Starting load modules from /etc/modules[ OK ]
- * Starting cold plug devices[ OK ]
- * Starting log initial device creation[ OK ]
- * Stopping flush early job output to logs[ OK ]
- * Stopping load modules from /etc/modules[ OK ]
- * Stopping NVIDIA specific init script[ OK ]
- * Stopping rpcsec_gss daemon[ OK ]
- * Stopping NVIDIA specific first-boot script[ OK ]
- * Starting system logging daemon[ OK ]
- * Starting set console font[ OK ]
- * Stopping set console font[ OK ]
- * Starting userspace bootsplash[ OK ]
- * Starting Send an event to indicate plymouth is up[ OK ]
- * Stopping Send an event to indicate plymouth is up[ OK ]
- * Starting configure network device security[ OK ]
- * Stopping cold plug devices[ OK ]
- * Stopping log initial device creation[ OK ]
- * Starting configure network device[ OK ]
- * Starting configure network device security[ OK ]
- * Stopping userspace bootsplash[ OK ]
- * Starting save udev log and update rules[ OK ]
- * Stopping save udev log and update rules[ OK ]
- * Starting System V initialisation compatibility[ OK ]
- * Starting configure virtual network devices[ OK ]
- * Stopping System V initialisation compatibility[ OK ]
- * Starting configure network device security[ OK ]
- * Starting configure network device security[ OK ]
- * Starting configure network device[ OK ]
- * Starting configure network device[ OK ]
- Starting MRI application software .....
- mount: unknown filesystem type 'cramfs'
- mount of /tmp/mri failed
- * Starting System V runlevel compatibility[ OK ]
- * Starting Restore Sound Card State[ OK ]
- * Starting save kernel messages[ OK ]
- * Starting configure network device security[ OK ]
- * Starting configure network device security[ OK ]
- * Starting configure network device security[ OK ]
- * Starting OpenSSH server[ OK ]
- * Starting regular background program processing daemon[ OK ]
- * Stopping Restore Sound Card State[ OK ]
- * Starting configure network device[ OK ]
- * Starting configure network device[ OK ]
- * Stopping save kernel messages[ OK ]
- * Starting configure network device[ OK ]
- * Starting Mount network filesystems[ OK ]
- * Starting Upstart job to start rpcbind on boot only[ OK ]
- * Starting Failsafe Boot Delay[ OK ]
- * Stopping Upstart job to start rpcbind on boot only[ OK ]
- * Stopping Restore Sound Card State[ OK ]
- * Stopping Mount network filesystems[ OK ]
- * Starting RPC portmapper replacement[ OK ]
- * Starting NSM status monitor[ OK ]
- * Starting Bridge file events into upstart[ OK ]
- * Starting Bridge socket events into upstart[ OK ]
- *
- * Stopping System V runlevel compatibility[ OK ]
- Ubuntu 14.04.1 LTS localhost.localdomain ttyS0
- localhost login: root
- Password:
- Last login: Mon Jan 12 16:23:06 UTC 2015 on ttyS0
- Welcome to Ubuntu 14.04.1 LTS (GNU/Linux 3.10.24 armv7l)
- * Documentation: https://help.ubuntu.com/
- root@localhost:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement