last_kmsg - 2012-02-13

s
[ 6237.706665] disable GPIO40 wakeup source
[ 6237.729888] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6238.724365] mmc1: Bus clock timer expired
[ 6238.724914] set GPIO40 as waketup source
[ 6238.725830] mmc1: Disable clocks
[ 6238.726531] mmc1: Enable clocks
[ 6238.727020] disable GPIO40 wakeup source
[ 6238.759521] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6239.754302] mmc1: Bus clock timer expired
[ 6239.755218] set GPIO40 as waketup source
[ 6239.755767] mmc1: Disable clocks
[ 6239.756469] mmc1: Enable clocks
[ 6239.756958] disable GPIO40 wakeup source
[ 6239.779510] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6240.774383] mmc1: Bus clock timer expired
[ 6240.775299] set GPIO40 as waketup source
[ 6240.775817] mmc1: Disable clocks
[ 6240.776519] mmc1: Enable clocks
[ 6240.777008] disable GPIO40 wakeup source
[ 6240.809478] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6241.804321] mmc1: Bus clock timer expired
[ 6241.805236] set GPIO40 as waketup source
[ 6241.805755] mmc1: Disable clocks
[ 6241.806457] mmc1: Enable clocks
[ 6241.807312] disable GPIO40 wakeup source
[ 6241.839508] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6242.834259] mmc1: Bus clock timer expired
[ 6242.835205] set GPIO40 as waketup source
[ 6242.835754] mmc1: Disable clocks
[ 6242.836456] mmc1: Enable clocks
[ 6242.837310] disable GPIO40 wakeup source
[ 6242.859497] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6243.854309] mmc1: Bus clock timer expired
[ 6243.855255] set GPIO40 as waketup source
[ 6243.855773] mmc1: Disable clocks
[ 6243.856506] mmc1: Enable clocks
[ 6243.857360] disable GPIO40 wakeup source
[ 6243.879486] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6244.874298] mmc1: Bus clock timer expired
[ 6244.875122] set GPIO40 as waketup source
[ 6244.875579] mmc1: Disable clocks
[ 6244.876129] mmc1: Enable clocks
[ 6244.876892] disable GPIO40 wakeup source
[ 6244.909484] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6245.904357] mmc1: Bus clock timer expired
[ 6245.904907] set GPIO40 as waketup source
[ 6245.905456] mmc1: Disable clocks
[ 6245.906585] mmc1: Enable clocks
[ 6245.907073] disable GPIO40 wakeup source
[ 6245.939453] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6246.934356] mmc1: Bus clock timer expired
[ 6246.934936] set GPIO40 as waketup source
[ 6246.935455] mmc1: Disable clocks
[ 6246.936553] mmc1: Enable clocks
[ 6246.937072] disable GPIO40 wakeup source
[ 6246.959503] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6247.806884] sequans_xxx: waking up the card...
[ 6247.809600] sequans_xxx: wait for completion (timeout 800 msec)...
[ 6247.965484] sequans_xxx: card is waked up successfully
[ 6248.989532] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6249.984283] mmc1: Bus clock timer expired
[ 6249.984832] set GPIO40 as waketup source
[ 6249.985382] mmc1: Disable clocks
[ 6249.986083] mmc1: Enable clocks
[ 6249.986602] disable GPIO40 wakeup source
[ 6250.019470] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6251.014343] mmc1: Bus clock timer expired
[ 6251.014892] set GPIO40 as waketup source
[ 6251.015411] mmc1: Disable clocks
[ 6251.016479] mmc1: Enable clocks
[ 6251.016967] disable GPIO40 wakeup source
[ 6251.039489] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6252.034332] mmc1: Bus clock timer expired
[ 6252.034820] set GPIO40 as waketup source
[ 6252.035278] mmc1: Disable clocks
[ 6252.036163] mmc1: Enable clocks
[ 6252.036590] disable GPIO40 wakeup source
[ 6252.069458] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6253.064361] mmc1: Bus clock timer expired
[ 6253.064910] set GPIO40 as waketup source
[ 6253.065460] mmc1: Disable clocks
[ 6253.066528] mmc1: Enable clocks
[ 6253.066986] disable GPIO40 wakeup source
[ 6253.099456] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6254.094360] mmc1: Bus clock timer expired
[ 6254.094909] set GPIO40 as waketup source
[ 6254.095428] mmc1: Disable clocks
[ 6254.096527] mmc1: Enable clocks
[ 6254.097015] disable GPIO40 wakeup source
[ 6254.119506] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6255.114349] mmc1: Bus clock timer expired
[ 6255.114898] set GPIO40 as waketup source
[ 6255.115783] mmc1: Disable clocks
[ 6255.116485] mmc1: Enable clocks
[ 6255.116973] disable GPIO40 wakeup source
[ 6255.149505] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6256.144317] mmc1: Bus clock timer expired
[ 6256.144866] set GPIO40 as waketup source
[ 6256.145751] mmc1: Disable clocks
[ 6256.146484] mmc1: Enable clocks
[ 6256.147003] disable GPIO40 wakeup source
[ 6256.179504] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6257.174346] mmc1: Bus clock timer expired
[ 6257.174896] set GPIO40 as waketup source
[ 6257.175811] mmc1: Disable clocks
[ 6257.176544] mmc1: Enable clocks
[ 6257.177032] disable GPIO40 wakeup source
[ 6257.209503] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6258.204376] mmc1: Bus clock timer expired
[ 6258.204956] set GPIO40 as waketup source
[ 6258.205841] mmc1: Disable clocks
[ 6258.206604] mmc1: Enable clocks
[ 6258.207061] disable GPIO40 wakeup source
[ 6258.239471] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6259.234283] mmc1: Bus clock timer expired
[ 6259.234832] set GPIO40 as waketup source
[ 6259.235717] mmc1: Disable clocks
[ 6259.236389] mmc1: Enable clocks
[ 6259.236877] disable GPIO40 wakeup source
[ 6259.269470] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6260.264373] mmc1: Bus clock timer expired
[ 6260.264923] set GPIO40 as waketup source
[ 6260.265441] mmc1: Disable clocks
[ 6260.266143] mmc1: Enable clocks
[ 6260.266632] disable GPIO40 wakeup source
[ 6260.299468] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6261.294372] mmc1: Bus clock timer expired
[ 6261.295318] set GPIO40 as waketup source
[ 6261.295837] mmc1: Disable clocks
[ 6261.296539] mmc1: Enable clocks
[ 6261.297027] disable GPIO40 wakeup source
[ 6261.319488] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6262.314392] mmc1: Bus clock timer expired
[ 6262.315307] set GPIO40 as waketup source
[ 6262.315826] mmc1: Disable clocks
[ 6262.316528] mmc1: Enable clocks
[ 6262.317352] disable GPIO40 wakeup source
[ 6262.349456] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6263.344268] mmc1: Bus clock timer expired
[ 6263.345214] set GPIO40 as waketup source
[ 6263.345733] mmc1: Disable clocks
[ 6263.346435] mmc1: Enable clocks
[ 6263.347290] disable GPIO40 wakeup source
[ 6263.369506] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6264.364379] mmc1: Bus clock timer expired
[ 6264.365295] set GPIO40 as waketup source
[ 6264.365844] mmc1: Disable clocks
[ 6264.366607] mmc1: Enable clocks
[ 6264.367462] disable GPIO40 wakeup source
[ 6264.399505] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6265.394378] mmc1: Bus clock timer expired
[ 6265.395294] set GPIO40 as waketup source
[ 6265.395843] mmc1: Disable clocks
[ 6265.396606] mmc1: Enable clocks
[ 6265.397460] disable GPIO40 wakeup source
[ 6265.419494] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6266.414306] mmc1: Bus clock timer expired
[ 6266.414886] set GPIO40 as waketup source
[ 6266.415405] mmc1: Disable clocks
[ 6266.416137] mmc1: Enable clocks
[ 6266.416625] disable GPIO40 wakeup source
[ 6266.449462] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6267.444335] mmc1: Bus clock timer expired
[ 6267.444885] set GPIO40 as waketup source
[ 6267.445404] mmc1: Disable clocks
[ 6267.446533] mmc1: Enable clocks
[ 6267.447021] disable GPIO40 wakeup source
[ 6267.469512] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6268.464355] mmc1: Bus clock timer expired
[ 6268.464904] set GPIO40 as waketup source
[ 6268.465423] mmc1: Disable clocks
[ 6268.466522] mmc1: Enable clocks
[ 6268.466979] disable GPIO40 wakeup source
[ 6268.499481] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6269.494384] mmc1: Bus clock timer expired
[ 6269.494964] set GPIO40 as waketup source
[ 6269.495483] mmc1: Disable clocks
[ 6269.496582] mmc1: Enable clocks
[ 6269.497070] disable GPIO40 wakeup source
[ 6269.529479] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6270.524414] mmc1: Bus clock timer expired
[ 6270.524963] set GPIO40 as waketup source
[ 6270.525512] mmc1: Disable clocks
[ 6270.526611] mmc1: Enable clocks
[ 6270.527099] disable GPIO40 wakeup source
[ 6270.559478] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6271.554382] mmc1: Bus clock timer expired
[ 6271.554962] set GPIO40 as waketup source
[ 6271.555877] mmc1: Disable clocks
[ 6271.556579] mmc1: Enable clocks
[ 6271.557067] disable GPIO40 wakeup source
[ 6271.589874] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6271.780853] batt: M2A_RPC: level_update: 97 at 6269027260346 (2012-02-13 22:17:40.467397959 UTC)
[ 6271.782409] batt: batt:power_supply_changed: battery at 6269028725189 (2012-02-13 22:17:40.468984874 UTC)
[ 6271.788085] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4204, batt_temp=350, batt_current=282, eval_current=0, level=97, charging_source=2, charging_enabled=2, full_bat=1500000, over_vchg=0 at 6269035072846 (2012-02-13 22:17:40.474630626 UTC)
[ 6271.790435] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4204, batt_temp=350, batt_current=282, eval_current=0, level=97, charging_source=2, charging_enabled=2, full_bat=1500000, over_vchg=0 at 6269041756196 (2012-02-13 22:17:40.476980480 UTC)
[ 6272.584381] mmc1: Bus clock timer expired
[ 6272.584960] set GPIO40 as waketup source
[ 6272.585510] mmc1: Disable clocks
[ 6272.586212] mmc1: Enable clocks
[ 6272.587066] disable GPIO40 wakeup source
[ 6272.619476] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6273.614288] mmc1: Bus clock timer expired
[ 6273.614868] set GPIO40 as waketup source
[ 6273.615386] mmc1: Disable clocks
[ 6273.616424] mmc1: Enable clocks
[ 6273.616912] disable GPIO40 wakeup source
[ 6273.639495] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6274.634277] mmc1: Bus clock timer expired
[ 6274.634826] set GPIO40 as waketup source
[ 6274.635375] mmc1: Disable clocks
[ 6274.636444] mmc1: Enable clocks
[ 6274.636932] disable GPIO40 wakeup source
[ 6274.669494] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6275.664276] mmc1: Bus clock timer expired
[ 6275.664855] set GPIO40 as waketup source
[ 6275.665374] mmc1: Disable clocks
[ 6275.666442] mmc1: Enable clocks
[ 6275.666931] disable GPIO40 wakeup source
[ 6275.689483] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6276.684295] mmc1: Bus clock timer expired
[ 6276.684844] set GPIO40 as waketup source
[ 6276.685394] mmc1: Disable clocks
[ 6276.686462] mmc1: Enable clocks
[ 6276.686950] disable GPIO40 wakeup source
[ 6276.709503] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6277.704315] mmc1: Bus clock timer expired
[ 6277.704864] set GPIO40 as waketup source
[ 6277.705780] mmc1: Disable clocks
[ 6277.706451] mmc1: Enable clocks
[ 6277.706939] disable GPIO40 wakeup source
[ 6277.739471] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6278.734283] mmc1: Bus clock timer expired
[ 6278.734466] set GPIO40 as waketup source
[ 6278.734741] mmc1: Disable clocks
[ 6278.734954] mmc1: Enable clocks
[ 6278.735107] disable GPIO40 wakeup source
[ 6278.769317] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6279.764373] mmc1: Bus clock timer expired
[ 6279.764953] set GPIO40 as waketup source
[ 6279.765838] mmc1: Disable clocks
[ 6279.766601] mmc1: Enable clocks
[ 6279.767089] disable GPIO40 wakeup source
[ 6279.799468] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6280.794342] mmc1: Bus clock timer expired
[ 6280.794891] set GPIO40 as waketup source
[ 6280.795806] mmc1: Disable clocks
[ 6280.796569] mmc1: Enable clocks
[ 6280.797058] disable GPIO40 wakeup source
[ 6280.829467] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6281.824279] mmc1: Bus clock timer expired
[ 6281.824829] set GPIO40 as waketup source
[ 6281.825714] mmc1: Disable clocks
[ 6281.826446] mmc1: Enable clocks
[ 6281.826904] disable GPIO40 wakeup source
[ 6281.859497] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6282.854309] mmc1: Bus clock timer expired
[ 6282.854858] set GPIO40 as waketup source
[ 6282.855743] mmc1: Disable clocks
[ 6282.856445] mmc1: Enable clocks
[ 6282.856933] disable GPIO40 wakeup source
[ 6282.889495] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6283.884368] mmc1: Bus clock timer expired
[ 6283.884643] set GPIO40 as waketup source
[ 6283.884826] mmc1: Disable clocks
[ 6283.885070] mmc1: Enable clocks
[ 6283.885223] disable GPIO40 wakeup source
[ 6283.909484] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6284.904266] mmc1: Bus clock timer expired
[ 6284.905181] set GPIO40 as waketup source
[ 6284.905700] mmc1: Disable clocks
[ 6284.906402] mmc1: Enable clocks
[ 6284.906860] disable GPIO40 wakeup source
[ 6284.939483] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6285.934265] mmc1: Bus clock timer expired
[ 6285.935180] set GPIO40 as waketup source
[ 6285.935729] mmc1: Disable clocks
[ 6285.936401] mmc1: Enable clocks
[ 6285.937225] disable GPIO40 wakeup source
[ 6285.969482] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6286.964294] mmc1: Bus clock timer expired
[ 6286.965118] set GPIO40 as waketup source
[ 6286.965606] mmc1: Disable clocks
[ 6286.966186] mmc1: Enable clocks
[ 6286.966949] disable GPIO40 wakeup source
[ 6287.319519] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6288.314361] mmc1: Bus clock timer expired
[ 6288.315307] set GPIO40 as waketup source
[ 6288.315826] mmc1: Disable clocks
[ 6288.316528] mmc1: Enable clocks
[ 6288.317382] disable GPIO40 wakeup source
[ 6288.409454] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6289.404357] mmc1: Bus clock timer expired
[ 6289.404937] set GPIO40 as waketup source
[ 6289.405456] mmc1: Disable clocks
[ 6289.406158] mmc1: Enable clocks
[ 6289.407012] disable GPIO40 wakeup source
[ 6289.529510] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6290.524383] mmc1: Bus clock timer expired
[ 6290.524932] set GPIO40 as waketup source
[ 6290.525482] mmc1: Disable clocks
[ 6290.526580] mmc1: Enable clocks
[ 6290.527069] disable GPIO40 wakeup source
[ 6290.559478] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6291.554351] mmc1: Bus clock timer expired
[ 6291.554901] set GPIO40 as waketup source
[ 6291.555450] mmc1: Disable clocks
[ 6291.556549] mmc1: Enable clocks
[ 6291.557037] disable GPIO40 wakeup source
[ 6291.589477] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6292.584350] mmc1: Bus clock timer expired
[ 6292.584899] set GPIO40 as waketup source
[ 6292.585449] mmc1: Disable clocks
[ 6292.586486] mmc1: Enable clocks
[ 6292.586975] disable GPIO40 wakeup source
[ 6292.619476] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6293.614379] mmc1: Bus clock timer expired
[ 6293.614959] set GPIO40 as waketup source
[ 6293.615478] mmc1: Disable clocks
[ 6293.616607] mmc1: Enable clocks
[ 6293.617095] disable GPIO40 wakeup source
[ 6293.649475] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6294.644378] mmc1: Bus clock timer expired
[ 6294.644958] set GPIO40 as waketup source
[ 6294.645843] mmc1: Disable clocks
[ 6294.646606] mmc1: Enable clocks
[ 6294.647094] disable GPIO40 wakeup source
[ 6294.679473] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6295.674255] mmc1: Bus clock timer expired
[ 6295.674774] set GPIO40 as waketup source
[ 6295.675567] mmc1: Disable clocks
[ 6295.676483] mmc1: Enable clocks
[ 6295.676971] disable GPIO40 wakeup source
[ 6295.709503] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6296.704376] mmc1: Bus clock timer expired
[ 6296.704956] set GPIO40 as waketup source
[ 6296.705841] mmc1: Disable clocks
[ 6296.706542] mmc1: Enable clocks
[ 6296.707031] disable GPIO40 wakeup source
[ 6296.739471] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6297.734375] mmc1: Bus clock timer expired
[ 6297.734924] set GPIO40 as waketup source
[ 6297.735809] mmc1: Disable clocks
[ 6297.736511] mmc1: Enable clocks
[ 6297.737030] disable GPIO40 wakeup source
[ 6297.769500] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6298.764312] mmc1: Bus clock timer expired
[ 6298.764862] set GPIO40 as waketup source
[ 6298.765747] mmc1: Disable clocks
[ 6298.766479] mmc1: Enable clocks
[ 6298.766967] disable GPIO40 wakeup source
[ 6298.799499] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6299.794281] mmc1: Bus clock timer expired
[ 6299.794860] set GPIO40 as waketup source
[ 6299.795745] mmc1: Disable clocks
[ 6299.796447] mmc1: Enable clocks
[ 6299.796905] disable GPIO40 wakeup source
[ 6299.829620] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6300.824340] mmc1: Bus clock timer expired
[ 6300.825286] set GPIO40 as waketup source
[ 6300.825805] mmc1: Disable clocks
[ 6300.826507] mmc1: Enable clocks
[ 6300.826995] disable GPIO40 wakeup source
[ 6300.859527] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6301.854339] mmc1: Bus clock timer expired
[ 6301.855255] set GPIO40 as waketup source
[ 6301.855773] mmc1: Disable clocks
[ 6301.856475] mmc1: Enable clocks
[ 6301.856994] disable GPIO40 wakeup source
[ 6301.889465] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6302.884277] mmc1: Bus clock timer expired
[ 6302.885192] set GPIO40 as waketup source
[ 6302.885711] mmc1: Disable clocks
[ 6302.886444] mmc1: Enable clocks
[ 6302.887298] disable GPIO40 wakeup source
[ 6302.919464] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6303.914276] mmc1: Bus clock timer expired
[ 6303.915191] set GPIO40 as waketup source
[ 6303.915740] mmc1: Disable clocks
[ 6303.916442] mmc1: Enable clocks
[ 6303.917297] disable GPIO40 wakeup source
[ 6303.949462] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6304.944305] mmc1: Bus clock timer expired
[ 6304.945220] set GPIO40 as waketup source
[ 6304.945739] mmc1: Disable clocks
[ 6304.946441] mmc1: Enable clocks
[ 6304.947265] disable GPIO40 wakeup source
[ 6305.049468] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6306.044281] mmc1: Bus clock timer expired
[ 6306.044830] set GPIO40 as waketup source
[ 6306.045379] mmc1: Disable clocks
[ 6306.046081] mmc1: Enable clocks
[ 6306.046936] disable GPIO40 wakeup source
[ 6306.079559] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6307.074340] mmc1: Bus clock timer expired
[ 6307.074890] set GPIO40 as waketup source
[ 6307.075439] mmc1: Disable clocks
[ 6307.076507] mmc1: Enable clocks
[ 6307.076965] disable GPIO40 wakeup source
[ 6307.109466] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6308.104309] mmc1: Bus clock timer expired
[ 6308.104888] set GPIO40 as waketup source
[ 6308.105407] mmc1: Disable clocks
[ 6308.106506] mmc1: Enable clocks
[ 6308.106994] disable GPIO40 wakeup source
[ 6308.139465] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6309.134399] mmc1: Bus clock timer expired
[ 6309.134948] set GPIO40 as waketup source
[ 6309.135498] mmc1: Disable clocks
[ 6309.136566] mmc1: Enable clocks
[ 6309.137054] disable GPIO40 wakeup source
[ 6309.169464] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6310.164276] mmc1: Bus clock timer expired
[ 6310.164764] set GPIO40 as waketup source
[ 6310.165252] mmc1: Disable clocks
[ 6310.166198] mmc1: Enable clocks
[ 6310.166625] disable GPIO40 wakeup source
[ 6310.199493] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6311.194274] mmc1: Bus clock timer expired
[ 6311.194824] set GPIO40 as waketup source
[ 6311.195739] mmc1: Disable clocks
[ 6311.196472] mmc1: Enable clocks
[ 6311.196990] disable GPIO40 wakeup source
[ 6311.229461] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6312.224304] mmc1: Bus clock timer expired
[ 6312.224853] set GPIO40 as waketup source
[ 6312.225738] mmc1: Disable clocks
[ 6312.226409] mmc1: Enable clocks
[ 6312.226898] disable GPIO40 wakeup source
[ 6312.259490] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6313.254272] mmc1: Bus clock timer expired
[ 6313.254760] set GPIO40 as waketup source
[ 6313.255554] mmc1: Disable clocks
[ 6313.256500] mmc1: Enable clocks
[ 6313.256988] disable GPIO40 wakeup source
[ 6313.289489] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6314.284332] mmc1: Bus clock timer expired
[ 6314.284881] set GPIO40 as waketup source
[ 6314.285797] mmc1: Disable clocks
[ 6314.286499] mmc1: Enable clocks
[ 6314.286987] disable GPIO40 wakeup source
[ 6314.319458] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6315.314361] mmc1: Bus clock timer expired
[ 6315.314941] set GPIO40 as waketup source
[ 6315.315826] mmc1: Disable clocks
[ 6315.317565] mmc1: Enable clocks
[ 6315.318054] disable GPIO40 wakeup source
[ 6315.349456] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6316.344360] mmc1: Bus clock timer expired
[ 6316.344940] set GPIO40 as waketup source
[ 6316.345825] mmc1: Disable clocks
[ 6316.346527] mmc1: Enable clocks
[ 6316.347015] disable GPIO40 wakeup source
[ 6316.379455] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6317.374389] mmc1: Bus clock timer expired
[ 6317.375305] set GPIO40 as waketup source
[ 6317.375854] mmc1: Disable clocks
[ 6317.376556] mmc1: Enable clocks
[ 6317.377044] disable GPIO40 wakeup source
[ 6318.409484] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6319.404388] mmc1: Bus clock timer expired
[ 6319.405303] set GPIO40 as waketup source
[ 6319.405822] mmc1: Disable clocks
[ 6319.406524] mmc1: Enable clocks
[ 6319.407012] disable GPIO40 wakeup source
[ 6319.429504] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6320.424285] mmc1: Bus clock timer expired
[ 6320.425079] set GPIO40 as waketup source
[ 6320.425567] mmc1: Disable clocks
[ 6320.426452] mmc1: Enable clocks
[ 6320.427215] disable GPIO40 wakeup source
[ 6320.449493] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6321.444335] mmc1: Bus clock timer expired
[ 6321.445251] set GPIO40 as waketup source
[ 6321.445800] mmc1: Disable clocks
[ 6321.446502] mmc1: Enable clocks
[ 6321.447357] disable GPIO40 wakeup source
[ 6321.469482] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6322.464324] mmc1: Bus clock timer expired
[ 6322.465240] set GPIO40 as waketup source
[ 6322.465759] mmc1: Disable clocks
[ 6322.466491] mmc1: Enable clocks
[ 6322.467346] disable GPIO40 wakeup source
[ 6322.489501] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6323.484375] mmc1: Bus clock timer expired
[ 6323.484954] set GPIO40 as waketup source
[ 6323.485473] mmc1: Disable clocks
[ 6323.486206] mmc1: Enable clocks
[ 6323.487030] disable GPIO40 wakeup source
[ 6323.519470] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6324.514373] mmc1: Bus clock timer expired
[ 6324.514953] set GPIO40 as waketup source
[ 6324.515472] mmc1: Disable clocks
[ 6324.516571] mmc1: Enable clocks
[ 6324.517059] disable GPIO40 wakeup source
[ 6324.549468] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6325.544311] mmc1: Bus clock timer expired
[ 6325.544830] set GPIO40 as waketup source
[ 6325.545288] mmc1: Disable clocks
[ 6325.546234] mmc1: Enable clocks
[ 6325.546661] disable GPIO40 wakeup source
[ 6325.569488] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6326.564361] mmc1: Bus clock timer expired
[ 6326.564941] set GPIO40 as waketup source
[ 6326.565460] mmc1: Disable clocks
[ 6326.566528] mmc1: Enable clocks
[ 6326.567016] disable GPIO40 wakeup source
[ 6326.589508] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6327.584289] mmc1: Bus clock timer expired
[ 6327.584777] set GPIO40 as waketup source
[ 6327.585235] mmc1: Disable clocks
[ 6327.586517] mmc1: Enable clocks
[ 6327.587005] disable GPIO40 wakeup source
[ 6327.619506] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6328.614379] mmc1: Bus clock timer expired
[ 6328.614929] set GPIO40 as waketup source
[ 6328.615844] mmc1: Disable clocks
[ 6328.616546] mmc1: Enable clocks
[ 6328.617034] disable GPIO40 wakeup source
[ 6328.639495] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6329.634338] mmc1: Bus clock timer expired
[ 6329.634887] set GPIO40 as waketup source
[ 6329.635772] mmc1: Disable clocks
[ 6329.636474] mmc1: Enable clocks
[ 6329.636962] disable GPIO40 wakeup source
[ 6329.669494] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6330.664306] mmc1: Bus clock timer expired
[ 6330.664794] set GPIO40 as waketup source
[ 6330.665588] mmc1: Disable clocks
[ 6330.666198] mmc1: Enable clocks
[ 6330.666656] disable GPIO40 wakeup source
[ 6330.699462] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6331.694274] mmc1: Bus clock timer expired
[ 6331.694824] set GPIO40 as waketup source
[ 6331.695739] mmc1: Disable clocks
[ 6331.696411] mmc1: Enable clocks
[ 6331.696899] disable GPIO40 wakeup source
[ 6331.729461] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6332.724365] mmc1: Bus clock timer expired
[ 6332.724945] set GPIO40 as waketup source
[ 6332.725830] mmc1: Disable clocks
[ 6332.726562] mmc1: Enable clocks
[ 6332.727081] disable GPIO40 wakeup source
[ 6332.749511] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6333.744415] mmc1: Bus clock timer expired
[ 6333.744964] set GPIO40 as waketup source
[ 6333.745849] mmc1: Disable clocks
[ 6333.746551] mmc1: Enable clocks
[ 6333.747039] disable GPIO40 wakeup source
[ 6333.789520] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6334.784301] mmc1: Bus clock timer expired
[ 6334.785217] set GPIO40 as waketup source
[ 6334.785736] mmc1: Disable clocks
[ 6334.786407] mmc1: Enable clocks
[ 6334.786895] disable GPIO40 wakeup source
[ 6334.829498] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6335.824340] mmc1: Bus clock timer expired
[ 6335.825256] set GPIO40 as waketup source
[ 6335.825775] mmc1: Disable clocks
[ 6335.826507] mmc1: Enable clocks
[ 6335.826995] disable GPIO40 wakeup source
[ 6335.849487] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6336.844360] mmc1: Bus clock timer expired
[ 6336.845275] set GPIO40 as waketup source
[ 6336.845825] mmc1: Disable clocks
[ 6336.846557] mmc1: Enable clocks
[ 6336.847381] disable GPIO40 wakeup source
[ 6336.869506] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6337.864349] mmc1: Bus clock timer expired
[ 6337.865264] set GPIO40 as waketup source
[ 6337.865783] mmc1: Disable clocks
[ 6337.866516] mmc1: Enable clocks
[ 6337.867370] disable GPIO40 wakeup source
[ 6337.899536] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6338.894348] mmc1: Bus clock timer expired
[ 6338.895294] set GPIO40 as waketup source
[ 6338.895843] mmc1: Disable clocks
[ 6338.896545] mmc1: Enable clocks
[ 6338.897399] disable GPIO40 wakeup source
[ 6338.929504] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6339.924285] mmc1: Bus clock timer expired
[ 6339.924835] set GPIO40 as waketup source
[ 6339.925354] mmc1: Disable clocks
[ 6339.926055] mmc1: Enable clocks
[ 6339.926879] disable GPIO40 wakeup source
[ 6339.959899] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6340.954284] mmc1: Bus clock timer expired
[ 6340.954833] set GPIO40 as waketup source
[ 6340.955383] mmc1: Disable clocks
[ 6340.956512] mmc1: Enable clocks
[ 6340.957000] disable GPIO40 wakeup source
[ 6340.989501] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6341.984283] mmc1: Bus clock timer expired
[ 6341.984863] set GPIO40 as waketup source
[ 6341.985412] mmc1: Disable clocks
[ 6341.986419] mmc1: Enable clocks
[ 6341.986907] disable GPIO40 wakeup source
[ 6342.019470] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6343.014343] mmc1: Bus clock timer expired
[ 6343.014892] set GPIO40 as waketup source
[ 6343.015441] mmc1: Disable clocks
[ 6343.016510] mmc1: Enable clocks
[ 6343.016967] disable GPIO40 wakeup source
[ 6343.049468] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6344.044372] mmc1: Bus clock timer expired
[ 6344.044921] set GPIO40 as waketup source
[ 6344.045471] mmc1: Disable clocks
[ 6344.046600] mmc1: Enable clocks
[ 6344.047088] disable GPIO40 wakeup source
[ 6344.079498] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6345.074279] mmc1: Bus clock timer expired
[ 6345.074829] set GPIO40 as waketup source
[ 6345.075714] mmc1: Disable clocks
[ 6345.076416] mmc1: Enable clocks
[ 6345.076904] disable GPIO40 wakeup source
[ 6345.909515] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6346.904632] mmc1: Bus clock timer expired
[ 6346.905181] set GPIO40 as waketup source
[ 6346.906066] mmc1: Disable clocks
[ 6346.906768] mmc1: Enable clocks
[ 6346.907257] disable GPIO40 wakeup source
[ 6346.929504] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6347.924377] mmc1: Bus clock timer expired
[ 6347.924926] set GPIO40 as waketup source
[ 6347.925842] mmc1: Disable clocks
[ 6347.926544] mmc1: Enable clocks
[ 6347.927032] disable GPIO40 wakeup source
[ 6347.949493] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6348.944274] mmc1: Bus clock timer expired
[ 6348.944854] set GPIO40 as waketup source
[ 6348.945770] mmc1: Disable clocks
[ 6348.946472] mmc1: Enable clocks
[ 6348.946960] disable GPIO40 wakeup source
[ 6348.969512] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6349.964294] mmc1: Bus clock timer expired
[ 6349.964843] set GPIO40 as waketup source
[ 6349.965759] mmc1: Disable clocks
[ 6349.966491] mmc1: Enable clocks
[ 6349.966979] disable GPIO40 wakeup source
[ 6349.989501] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6350.984283] mmc1: Bus clock timer expired
[ 6350.984832] set GPIO40 as waketup source
[ 6350.985717] mmc1: Disable clocks
[ 6350.986419] mmc1: Enable clocks
[ 6350.986907] disable GPIO40 wakeup source
[ 6351.009490] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6352.004364] mmc1: Bus clock timer expired
[ 6352.005279] set GPIO40 as waketup source
[ 6352.005798] mmc1: Disable clocks
[ 6352.006500] mmc1: Enable clocks
[ 6352.006988] disable GPIO40 wakeup source
[ 6352.029510] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6353.024291] mmc1: Bus clock timer expired
[ 6353.025207] set GPIO40 as waketup source
[ 6353.025726] mmc1: Disable clocks
[ 6353.026428] mmc1: Enable clocks
[ 6353.026916] disable GPIO40 wakeup source
[ 6353.049499] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6354.044372] mmc1: Bus clock timer expired
[ 6354.045288] set GPIO40 as waketup source
[ 6354.045806] mmc1: Disable clocks
[ 6354.046539] mmc1: Enable clocks
[ 6354.047363] disable GPIO40 wakeup source
[ 6354.069488] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6355.064361] mmc1: Bus clock timer expired
[ 6355.065277] set GPIO40 as waketup source
[ 6355.065826] mmc1: Disable clocks
[ 6355.066528] mmc1: Enable clocks
[ 6355.067382] disable GPIO40 wakeup source
[ 6355.089538] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6356.084381] mmc1: Bus clock timer expired
[ 6356.085296] set GPIO40 as waketup source
[ 6356.085845] mmc1: Disable clocks
[ 6356.086547] mmc1: Enable clocks
[ 6356.087402] disable GPIO40 wakeup source
[ 6356.109497] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6357.104278] mmc1: Bus clock timer expired
[ 6357.104858] set GPIO40 as waketup source
[ 6357.105377] mmc1: Disable clocks
[ 6357.106109] mmc1: Enable clocks
[ 6357.106964] disable GPIO40 wakeup source
[ 6357.129486] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6358.124298] mmc1: Bus clock timer expired
[ 6358.124877] set GPIO40 as waketup source
[ 6358.125396] mmc1: Disable clocks
[ 6358.126464] mmc1: Enable clocks
[ 6358.126953] disable GPIO40 wakeup source
[ 6358.149505] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6359.144378] mmc1: Bus clock timer expired
[ 6359.144927] set GPIO40 as waketup source
[ 6359.145446] mmc1: Disable clocks
[ 6359.146514] mmc1: Enable clocks
[ 6359.147003] disable GPIO40 wakeup source
[ 6359.169494] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6360.164276] mmc1: Bus clock timer expired
[ 6360.164825] set GPIO40 as waketup source
[ 6360.165344] mmc1: Disable clocks
[ 6360.166381] mmc1: Enable clocks
[ 6360.166870] disable GPIO40 wakeup source
[ 6360.189483] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6361.184356] mmc1: Bus clock timer expired
[ 6361.184936] set GPIO40 as waketup source
[ 6361.185455] mmc1: Disable clocks
[ 6361.186553] mmc1: Enable clocks
[ 6361.187042] disable GPIO40 wakeup source
[ 6361.209503] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6362.204345] mmc1: Bus clock timer expired
[ 6362.204895] set GPIO40 as waketup source
[ 6362.205780] mmc1: Disable clocks
[ 6362.206512] mmc1: Enable clocks
[ 6362.207000] disable GPIO40 wakeup source
[ 6362.229492] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6363.224304] mmc1: Bus clock timer expired
[ 6363.224853] set GPIO40 as waketup source
[ 6363.225738] mmc1: Disable clocks
[ 6363.226501] mmc1: Enable clocks
[ 6363.226989] disable GPIO40 wakeup source
[ 6363.249511] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6364.244354] mmc1: Bus clock timer expired
[ 6364.244903] set GPIO40 as waketup source
[ 6364.245819] mmc1: Disable clocks
[ 6364.246551] mmc1: Enable clocks
[ 6364.247039] disable GPIO40 wakeup source
[ 6364.269500] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6365.264282] mmc1: Bus clock timer expired
[ 6365.264862] set GPIO40 as waketup source
[ 6365.265747] mmc1: Disable clocks
[ 6365.266479] mmc1: Enable clocks
[ 6365.266967] disable GPIO40 wakeup source
[ 6365.299468] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6366.294372] mmc1: Bus clock timer expired
[ 6366.294952] set GPIO40 as waketup source
[ 6366.295837] mmc1: Disable clocks
[ 6366.296539] mmc1: Enable clocks
[ 6366.297027] disable GPIO40 wakeup source
[ 6366.669921] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6367.664367] mmc1: Bus clock timer expired
[ 6367.664916] set GPIO40 as waketup source
[ 6367.665832] mmc1: Disable clocks
[ 6367.666534] mmc1: Enable clocks
[ 6367.667022] disable GPIO40 wakeup source
[ 6367.759521] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6367.986938] sequans_xxx: waking up the card...
[ 6367.990020] sequans_xxx: wait for completion (timeout 800 msec)...
[ 6368.765777] sequans_xxx: card is waked up successfully
[ 6369.799499] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6370.794311] mmc1: Bus clock timer expired
[ 6370.794860] set GPIO40 as waketup source
[ 6370.795776] mmc1: Disable clocks
[ 6370.796478] mmc1: Enable clocks
[ 6370.796966] disable GPIO40 wakeup source
[ 6370.829498] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6371.824310] mmc1: Bus clock timer expired
[ 6371.824859] set GPIO40 as waketup source
[ 6371.825744] mmc1: Disable clocks
[ 6371.826538] mmc1: Enable clocks
[ 6371.827026] disable GPIO40 wakeup source
[ 6371.859649] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6372.854309] mmc1: Bus clock timer expired
[ 6372.855224] set GPIO40 as waketup source
[ 6372.855743] mmc1: Disable clocks
[ 6372.856445] mmc1: Enable clocks
[ 6372.856933] disable GPIO40 wakeup source
[ 6372.879486] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6373.874267] mmc1: Bus clock timer expired
[ 6373.875213] set GPIO40 as waketup source
[ 6373.875732] mmc1: Disable clocks
[ 6373.876403] mmc1: Enable clocks
[ 6373.876892] disable GPIO40 wakeup source
[ 6373.899505] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6374.894378] mmc1: Bus clock timer expired
[ 6374.895294] set GPIO40 as waketup source
[ 6374.895843] mmc1: Disable clocks
[ 6374.896575] mmc1: Enable clocks
[ 6374.897430] disable GPIO40 wakeup source
[ 6374.919494] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6375.914276] mmc1: Bus clock timer expired
[ 6375.915191] set GPIO40 as waketup source
[ 6375.915710] mmc1: Disable clocks
[ 6375.916412] mmc1: Enable clocks
[ 6375.917266] disable GPIO40 wakeup source
[ 6375.949493] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6376.944274] mmc1: Bus clock timer expired
[ 6376.945190] set GPIO40 as waketup source
[ 6376.945739] mmc1: Disable clocks
[ 6376.946411] mmc1: Enable clocks
[ 6376.947296] disable GPIO40 wakeup source
[ 6376.979492] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6377.974304] mmc1: Bus clock timer expired
[ 6377.975219] set GPIO40 as waketup source
[ 6377.975738] mmc1: Disable clocks
[ 6377.976501] mmc1: Enable clocks
[ 6377.977325] disable GPIO40 wakeup source
[ 6378.009460] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6379.004302] mmc1: Bus clock timer expired
[ 6379.004882] set GPIO40 as waketup source
[ 6379.005401] mmc1: Disable clocks
[ 6379.006469] mmc1: Enable clocks
[ 6379.006958] disable GPIO40 wakeup source
[ 6379.039886] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6380.034271] mmc1: Bus clock timer expired
[ 6380.034851] set GPIO40 as waketup source
[ 6380.035369] mmc1: Disable clocks
[ 6380.036468] mmc1: Enable clocks
[ 6380.036956] disable GPIO40 wakeup source
[ 6380.069458] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6381.064331] mmc1: Bus clock timer expired
[ 6381.064880] set GPIO40 as waketup source
[ 6381.065399] mmc1: Disable clocks
[ 6381.066467] mmc1: Enable clocks
[ 6381.066986] disable GPIO40 wakeup source
[ 6381.089508] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6382.084381] mmc1: Bus clock timer expired
[ 6382.084960] set GPIO40 as waketup source
[ 6382.085479] mmc1: Disable clocks
[ 6382.086791] mmc1: Enable clocks
[ 6382.087280] disable GPIO40 wakeup source
[ 6382.109497] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6383.104370] mmc1: Bus clock timer expired
[ 6383.104919] set GPIO40 as waketup source
[ 6383.105468] mmc1: Disable clocks
[ 6383.106536] mmc1: Enable clocks
[ 6383.107025] disable GPIO40 wakeup source
[ 6383.309509] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6384.304382] mmc1: Bus clock timer expired
[ 6384.304931] set GPIO40 as waketup source
[ 6384.305847] mmc1: Disable clocks
[ 6384.306579] mmc1: Enable clocks
[ 6384.307067] disable GPIO40 wakeup source
[ 6384.399505] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6385.394378] mmc1: Bus clock timer expired
[ 6385.394958] set GPIO40 as waketup source
[ 6385.395874] mmc1: Disable clocks
[ 6385.396575] mmc1: Enable clocks
[ 6385.397064] disable GPIO40 wakeup source
[ 6385.419464] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6386.414337] mmc1: Bus clock timer expired
[ 6386.414886] set GPIO40 as waketup source
[ 6386.415771] mmc1: Disable clocks
[ 6386.416564] mmc1: Enable clocks
[ 6386.417022] disable GPIO40 wakeup source
[ 6386.449493] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6387.444335] mmc1: Bus clock timer expired
[ 6387.444885] set GPIO40 as waketup source
[ 6387.445770] mmc1: Disable clocks
[ 6387.446533] mmc1: Enable clocks
[ 6387.447021] disable GPIO40 wakeup source
[ 6387.469512] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6388.464385] mmc1: Bus clock timer expired
[ 6388.464965] set GPIO40 as waketup source
[ 6388.465850] mmc1: Disable clocks
[ 6388.466552] mmc1: Enable clocks
[ 6388.467041] disable GPIO40 wakeup source
[ 6388.499511] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6389.494323] mmc1: Bus clock timer expired
[ 6389.495239] set GPIO40 as waketup source
[ 6389.495758] mmc1: Disable clocks
[ 6389.496429] mmc1: Enable clocks
[ 6389.496917] disable GPIO40 wakeup source
[ 6389.529479] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6390.524414] mmc1: Bus clock timer expired
[ 6390.525329] set GPIO40 as waketup source
[ 6390.525848] mmc1: Disable clocks
[ 6390.526580] mmc1: Enable clocks
[ 6390.527069] disable GPIO40 wakeup source
[ 6390.559478] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6391.554382] mmc1: Bus clock timer expired
[ 6391.555297] set GPIO40 as waketup source
[ 6391.555847] mmc1: Disable clocks
[ 6391.556610] mmc1: Enable clocks
[ 6391.557464] disable GPIO40 wakeup source
[ 6391.589508] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6392.584381] mmc1: Bus clock timer expired
[ 6392.585327] set GPIO40 as waketup source
[ 6392.585845] mmc1: Disable clocks
[ 6392.586547] mmc1: Enable clocks
[ 6392.587402] disable GPIO40 wakeup source
[ 6392.609466] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6393.604370] mmc1: Bus clock timer expired
[ 6393.605316] set GPIO40 as waketup source
[ 6393.605834] mmc1: Disable clocks
[ 6393.606597] mmc1: Enable clocks
[ 6393.607452] disable GPIO40 wakeup source
[ 6393.639465] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6394.634307] mmc1: Bus clock timer expired
[ 6394.635253] set GPIO40 as waketup source
[ 6394.635803] mmc1: Disable clocks
[ 6394.636505] mmc1: Enable clocks
[ 6394.637359] disable GPIO40 wakeup source
[ 6395.919555] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6396.914367] mmc1: Bus clock timer expired
[ 6396.914947] set GPIO40 as waketup source
[ 6396.915466] mmc1: Disable clocks
[ 6396.916595] mmc1: Enable clocks
[ 6396.917083] disable GPIO40 wakeup source
[ 6396.949493] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6397.944274] mmc1: Bus clock timer expired
[ 6397.944824] set GPIO40 as waketup source
[ 6397.945373] mmc1: Disable clocks
[ 6397.946472] mmc1: Enable clocks
[ 6397.946960] disable GPIO40 wakeup source
[ 6397.969512] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6398.964263] mmc1: Bus clock timer expired
[ 6398.964813] set GPIO40 as waketup source
[ 6398.965332] mmc1: Disable clocks
[ 6398.966430] mmc1: Enable clocks
[ 6398.966918] disable GPIO40 wakeup source
[ 6398.999511] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6399.994293] mmc1: Bus clock timer expired
[ 6399.994873] set GPIO40 as waketup source
[ 6399.995391] mmc1: Disable clocks
[ 6399.996459] mmc1: Enable clocks
[ 6399.996948] disable GPIO40 wakeup source
[ 6400.019500] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6401.014282] mmc1: Bus clock timer expired
[ 6401.014862] set GPIO40 as waketup source
[ 6401.015380] mmc1: Disable clocks
[ 6401.016418] mmc1: Enable clocks
[ 6401.016906] disable GPIO40 wakeup source
[ 6401.049530] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6402.044311] mmc1: Bus clock timer expired
[ 6402.044860] set GPIO40 as waketup source
[ 6402.045745] mmc1: Disable clocks
[ 6402.046447] mmc1: Enable clocks
[ 6402.046936] disable GPIO40 wakeup source
[ 6402.069488] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6403.064300] mmc1: Bus clock timer expired
[ 6403.064849] set GPIO40 as waketup source
[ 6403.065765] mmc1: Disable clocks
[ 6403.066497] mmc1: Enable clocks
[ 6403.066986] disable GPIO40 wakeup source
[ 6403.089538] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6404.084289] mmc1: Bus clock timer expired
[ 6404.084838] set GPIO40 as waketup source
[ 6404.085754] mmc1: Disable clocks
[ 6404.086425] mmc1: Enable clocks
[ 6404.086914] disable GPIO40 wakeup source
[ 6404.119720] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6405.114349] mmc1: Bus clock timer expired
[ 6405.114898] set GPIO40 as waketup source
[ 6405.115814] mmc1: Disable clocks
[ 6405.116546] mmc1: Enable clocks
[ 6405.117034] disable GPIO40 wakeup source
[ 6405.149505] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6406.144287] mmc1: Bus clock timer expired
[ 6406.144866] set GPIO40 as waketup source
[ 6406.145751] mmc1: Disable clocks
[ 6406.146423] mmc1: Enable clocks
[ 6406.146911] disable GPIO40 wakeup source
[ 6406.179473] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6407.174377] mmc1: Bus clock timer expired
[ 6407.175292] set GPIO40 as waketup source
[ 6407.175842] mmc1: Disable clocks
[ 6407.176544] mmc1: Enable clocks
[ 6407.177032] disable GPIO40 wakeup source
[ 6407.199493] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6408.194305] mmc1: Bus clock timer expired
[ 6408.195220] set GPIO40 as waketup source
[ 6408.195739] mmc1: Disable clocks
[ 6408.196441] mmc1: Enable clocks
[ 6408.196929] disable GPIO40 wakeup source
[ 6408.229492] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6409.224304] mmc1: Bus clock timer expired
[ 6409.225250] set GPIO40 as waketup source
[ 6409.225769] mmc1: Disable clocks
[ 6409.226531] mmc1: Enable clocks
[ 6409.227386] disable GPIO40 wakeup source
[ 6409.259460] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6410.254333] mmc1: Bus clock timer expired
[ 6410.255249] set GPIO40 as waketup source
[ 6410.255798] mmc1: Disable clocks
[ 6410.256530] mmc1: Enable clocks
[ 6410.257385] disable GPIO40 wakeup source
[ 6410.279510] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6411.274322] mmc1: Bus clock timer expired
[ 6411.275146] set GPIO40 as waketup source
[ 6411.275634] mmc1: Disable clocks
[ 6411.276245] mmc1: Enable clocks
[ 6411.277038] disable GPIO40 wakeup source
[ 6411.309478] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6412.304321] mmc1: Bus clock timer expired
[ 6412.305236] set GPIO40 as waketup source
[ 6412.305786] mmc1: Disable clocks
[ 6412.306457] mmc1: Enable clocks
[ 6412.307281] disable GPIO40 wakeup source
[ 6412.339477] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6413.334350] mmc1: Bus clock timer expired
[ 6413.334899] set GPIO40 as waketup source
[ 6413.335449] mmc1: Disable clocks
[ 6413.336517] mmc1: Enable clocks
[ 6413.337005] disable GPIO40 wakeup source
[ 6413.359497] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6414.354278] mmc1: Bus clock timer expired
[ 6414.354858] set GPIO40 as waketup source
[ 6414.355377] mmc1: Disable clocks
[ 6414.356475] mmc1: Enable clocks
[ 6414.356964] disable GPIO40 wakeup source
[ 6414.389465] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6415.384368] mmc1: Bus clock timer expired
[ 6415.384948] set GPIO40 as waketup source
[ 6415.385467] mmc1: Disable clocks
[ 6415.386535] mmc1: Enable clocks
[ 6415.387023] disable GPIO40 wakeup source
[ 6415.419464] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6416.414367] mmc1: Bus clock timer expired
[ 6416.414550] set GPIO40 as waketup source
[ 6416.414703] mmc1: Disable clocks
[ 6416.415039] mmc1: Enable clocks
[ 6416.415191] disable GPIO40 wakeup source
[ 6416.449462] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6417.444396] mmc1: Bus clock timer expired
[ 6417.444946] set GPIO40 as waketup source
[ 6417.445495] mmc1: Disable clocks
[ 6417.446624] mmc1: Enable clocks
[ 6417.447082] disable GPIO40 wakeup source
[ 6417.469940] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6418.464447] mmc1: Bus clock timer expired
[ 6418.465026] set GPIO40 as waketup source
[ 6418.465911] mmc1: Disable clocks
[ 6418.466613] mmc1: Enable clocks
[ 6418.467102] disable GPIO40 wakeup source
[ 6418.499481] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6419.494323] mmc1: Bus clock timer expired
[ 6419.494873] set GPIO40 as waketup source
[ 6419.495788] mmc1: Disable clocks
[ 6419.496490] mmc1: Enable clocks
[ 6419.497009] disable GPIO40 wakeup source
[ 6419.519500] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6420.514404] mmc1: Bus clock timer expired
[ 6420.514984] set GPIO40 as waketup source
[ 6420.515869] mmc1: Disable clocks
[ 6420.516571] mmc1: Enable clocks
[ 6420.517059] disable GPIO40 wakeup source
[ 6426.605041] sequans_xxx: got RX data, card is not asleep
[ 6426.639526] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6427.634307] mmc1: Bus clock timer expired
[ 6427.634857] set GPIO40 as waketup source
[ 6427.635375] mmc1: Disable clocks
[ 6427.636077] mmc1: Enable clocks
[ 6427.636901] disable GPIO40 wakeup source
[ 6427.659484] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6428.654327] mmc1: Bus clock timer expired
[ 6428.654876] set GPIO40 as waketup source
[ 6428.655426] mmc1: Disable clocks
[ 6428.656494] mmc1: Enable clocks
[ 6428.656982] disable GPIO40 wakeup source
[ 6428.679504] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6429.674377] mmc1: Bus clock timer expired
[ 6429.674957] set GPIO40 as waketup source
[ 6429.675476] mmc1: Disable clocks
[ 6429.676544] mmc1: Enable clocks
[ 6429.677032] disable GPIO40 wakeup source
[ 6429.699493] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6430.694274] mmc1: Bus clock timer expired
[ 6430.694854] set GPIO40 as waketup source
[ 6430.695373] mmc1: Disable clocks
[ 6430.696472] mmc1: Enable clocks
[ 6430.696960] disable GPIO40 wakeup source
[ 6430.719512] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6431.714385] mmc1: Bus clock timer expired
[ 6431.714965] set GPIO40 as waketup source
[ 6431.715484] mmc1: Disable clocks
[ 6431.716583] mmc1: Enable clocks
[ 6431.717071] disable GPIO40 wakeup source
[ 6431.759521] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6432.754394] mmc1: Bus clock timer expired
[ 6432.754943] set GPIO40 as waketup source
[ 6432.755859] mmc1: Disable clocks
[ 6432.756561] mmc1: Enable clocks
[ 6432.757049] disable GPIO40 wakeup source
[ 6432.779510] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6433.774291] mmc1: Bus clock timer expired
[ 6433.774841] set GPIO40 as waketup source
[ 6433.775756] mmc1: Disable clocks
[ 6433.776397] mmc1: Enable clocks
[ 6433.776885] disable GPIO40 wakeup source
[ 6433.799499] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6434.794281] mmc1: Bus clock timer expired
[ 6434.794830] set GPIO40 as waketup source
[ 6434.795745] mmc1: Disable clocks
[ 6434.796447] mmc1: Enable clocks
[ 6434.796936] disable GPIO40 wakeup source
[ 6434.819488] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6435.814361] mmc1: Bus clock timer expired
[ 6435.814910] set GPIO40 as waketup source
[ 6435.815826] mmc1: Disable clocks
[ 6435.816558] mmc1: Enable clocks
[ 6435.817047] disable GPIO40 wakeup source
[ 6435.839508] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6436.834350] mmc1: Bus clock timer expired
[ 6436.834899] set GPIO40 as waketup source
[ 6436.835784] mmc1: Disable clocks
[ 6436.836547] mmc1: Enable clocks
[ 6436.837036] disable GPIO40 wakeup source
[ 6436.879516] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6437.874328] mmc1: Bus clock timer expired
[ 6437.874877] set GPIO40 as waketup source
[ 6437.875762] mmc1: Disable clocks
[ 6437.876464] mmc1: Enable clocks
[ 6437.876953] disable GPIO40 wakeup source
[ 6437.899505] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6438.894378] mmc1: Bus clock timer expired
[ 6438.895324] set GPIO40 as waketup source
[ 6438.895843] mmc1: Disable clocks
[ 6438.896575] mmc1: Enable clocks
[ 6438.897094] disable GPIO40 wakeup source
[ 6438.919494] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6439.914428] mmc1: Bus clock timer expired
[ 6439.915344] set GPIO40 as waketup source
[ 6439.915893] mmc1: Disable clocks
[ 6439.916625] mmc1: Enable clocks
[ 6439.917480] disable GPIO40 wakeup source
[ 6439.939483] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6440.934234] mmc1: Bus clock timer expired
[ 6440.935058] set GPIO40 as waketup source
[ 6440.935516] mmc1: Disable clocks
[ 6440.936462] mmc1: Enable clocks
[ 6440.937316] disable GPIO40 wakeup source
[ 6440.959503] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6441.954284] mmc1: Bus clock timer expired
[ 6441.955200] set GPIO40 as waketup source
[ 6441.955718] mmc1: Disable clocks
[ 6441.956451] mmc1: Enable clocks
[ 6441.957305] disable GPIO40 wakeup source
[ 6441.999542] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6442.994293] mmc1: Bus clock timer expired
[ 6442.995239] set GPIO40 as waketup source
[ 6442.995758] mmc1: Disable clocks
[ 6442.996429] mmc1: Enable clocks
[ 6442.997283] disable GPIO40 wakeup source
[ 6443.019531] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6444.014312] mmc1: Bus clock timer expired
[ 6444.014862] set GPIO40 as waketup source
[ 6444.015380] mmc1: Disable clocks
[ 6444.016082] mmc1: Enable clocks
[ 6444.016906] disable GPIO40 wakeup source
[ 6444.039489] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6445.034271] mmc1: Bus clock timer expired
[ 6445.034820] set GPIO40 as waketup source
[ 6445.035339] mmc1: Disable clocks
[ 6445.036407] mmc1: Enable clocks
[ 6445.036895] disable GPIO40 wakeup source
[ 6445.059509] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6446.054290] mmc1: Bus clock timer expired
[ 6446.054870] set GPIO40 as waketup source
[ 6446.055389] mmc1: Disable clocks
[ 6446.056427] mmc1: Enable clocks
[ 6446.056915] disable GPIO40 wakeup source
[ 6446.079498] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6447.074279] mmc1: Bus clock timer expired
[ 6447.074859] set GPIO40 as waketup source
[ 6447.075378] mmc1: Disable clocks
[ 6447.076477] mmc1: Enable clocks
[ 6447.076965] disable GPIO40 wakeup source
[ 6447.119537] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6448.114288] mmc1: Bus clock timer expired
[ 6448.114837] set GPIO40 as waketup source
[ 6448.115356] mmc1: Disable clocks
[ 6448.116424] mmc1: Enable clocks
[ 6448.116912] disable GPIO40 wakeup source
[ 6448.139495] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6449.180633] mmc1: Bus clock timer expired
[ 6449.181213] set GPIO40 as waketup source
[ 6449.182098] mmc1: Disable clocks
[ 6449.182861] mmc1: Enable clocks
[ 6449.183349] disable GPIO40 wakeup source
[ 6449.199523] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6450.194335] mmc1: Bus clock timer expired
[ 6450.194885] set GPIO40 as waketup source
[ 6450.195770] mmc1: Disable clocks
[ 6450.204437] mmc1: Enable clocks
[ 6450.204986] disable GPIO40 wakeup source
[ 6450.219512] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6451.214355] mmc1: Bus clock timer expired
[ 6451.214904] set GPIO40 as waketup source
[ 6451.215789] mmc1: Disable clocks
[ 6451.216522] mmc1: Enable clocks
[ 6451.216979] disable GPIO40 wakeup source
[ 6451.239501] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6451.785186] batt: M2A_RPC: set_charging: 100 at 6449031532804 (2012-02-13 22:20:40.471731453 UTC)
[ 6451.786651] TPS65200 Switch charger set control100
[ 6451.787170] Switch charger CHECK
[ 6451.789581] TPS65200 STATUS_A26, INT2:0
[ 6452.234344] mmc1: Bus clock timer expired
[ 6452.234924] set GPIO40 as waketup source
[ 6452.235809] mmc1: Disable clocks
[ 6452.236541] mmc1: Enable clocks
[ 6452.237060] disable GPIO40 wakeup source
[ 6452.259521] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6453.254272] mmc1: Bus clock timer expired
[ 6453.254852] set GPIO40 as waketup source
[ 6453.255737] mmc1: Disable clocks
[ 6453.256439] mmc1: Enable clocks
[ 6453.256927] disable GPIO40 wakeup source
[ 6453.279510] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6454.274353] mmc1: Bus clock timer expired
[ 6454.274902] set GPIO40 as waketup source
[ 6454.275787] mmc1: Disable clocks
[ 6454.276489] mmc1: Enable clocks
[ 6454.276977] disable GPIO40 wakeup source
[ 6454.299499] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6455.294311] mmc1: Bus clock timer expired
[ 6455.294860] set GPIO40 as waketup source
[ 6455.295776] mmc1: Disable clocks
[ 6455.296417] mmc1: Enable clocks
[ 6455.296905] disable GPIO40 wakeup source
[ 6455.319488] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6456.314270] mmc1: Bus clock timer expired
[ 6456.314819] set GPIO40 as waketup source
[ 6456.315734] mmc1: Disable clocks
[ 6456.316375] mmc1: Enable clocks
[ 6456.316894] disable GPIO40 wakeup source
[ 6456.349487] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6457.344360] mmc1: Bus clock timer expired
[ 6457.345275] set GPIO40 as waketup source
[ 6457.345825] mmc1: Disable clocks
[ 6457.346527] mmc1: Enable clocks
[ 6457.346984] disable GPIO40 wakeup source
[ 6457.379455] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6458.374267] mmc1: Bus clock timer expired
[ 6458.375213] set GPIO40 as waketup source
[ 6458.375732] mmc1: Disable clocks
[ 6458.376434] mmc1: Enable clocks
[ 6458.376922] disable GPIO40 wakeup source
[ 6458.409484] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6459.404266] mmc1: Bus clock timer expired
[ 6459.405181] set GPIO40 as waketup source
[ 6459.405700] mmc1: Disable clocks
[ 6459.406402] mmc1: Enable clocks
[ 6459.407257] disable GPIO40 wakeup source
[ 6459.429504] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6460.424377] mmc1: Bus clock timer expired
[ 6460.425292] set GPIO40 as waketup source
[ 6460.425842] mmc1: Disable clocks
[ 6460.426574] mmc1: Enable clocks
[ 6460.427429] disable GPIO40 wakeup source
[ 6460.449493] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6461.444366] mmc1: Bus clock timer expired
[ 6461.445281] set GPIO40 as waketup source
[ 6461.445831] mmc1: Disable clocks
[ 6461.446533] mmc1: Enable clocks
[ 6461.447418] disable GPIO40 wakeup source
[ 6461.469482] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6462.146759] batt: tps65200_int_detection: over voltage is detected. at 6459393501801 (2012-02-13 22:20:50.833273204 UTC)
[ 6462.344299] Switch charger CHECK_INT2
[ 6462.346038] TPS65200 INT2 81
[ 6462.346527] batt: Read TPS65200 INT2 register value: 81 at 6459592842622 (2012-02-13 22:20:51.033071789 UTC)
[ 6462.347930] Switch charger CHECK_INT2
[ 6462.349151] TPS65200 INT2 0
[ 6462.349639] batt: Read TPS65200 INT2 register value: 0 at 6459596321626 (2012-02-13 22:20:51.036215099 UTC)
[ 6462.351043] Switch charger CHECK_INT2
[ 6462.352630] TPS65200 INT2 0
[ 6462.353118] batt: Read TPS65200 INT2 register value: 0 at 6459599434419 (2012-02-13 22:20:51.039694103 UTC)
[ 6462.354614] Switch charger CHECK_CONTROL
[ 6462.355834] TPS65200 regh 0x00=3
[ 6462.464324] mmc1: Bus clock timer expired
[ 6462.465240] set GPIO40 as waketup source
[ 6462.465789] mmc1: Disable clocks
[ 6462.466461] mmc1: Enable clocks
[ 6462.467315] disable GPIO40 wakeup source
[ 6462.489501] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6463.484344] mmc1: Bus clock timer expired
[ 6463.485260] set GPIO40 as waketup source
[ 6463.485778] mmc1: Disable clocks
[ 6463.486480] mmc1: Enable clocks
[ 6463.487335] disable GPIO40 wakeup source
[ 6463.519470] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6463.662475] batt: M2A_RPC: set_charging: 0 at 6460908852140 (2012-02-13 22:20:52.348989754 UTC)
[ 6463.663604] TPS65200 Switch charger set control0
[ 6463.664764] Switch charger OFF
[ 6463.668548] batt: M2A_RPC: cable_update: none at 6460914864103 (2012-02-13 22:20:52.355123787 UTC)
[ 6463.669982] batt: htc_cable_status_update: 2 -> 0
[ 6463.670532] msm_hsusb_set_vbus_state: 0
[ 6463.671386] supersonic_uart_usb_switch:uart:1
[ 6463.671905] supersonic_uart_usb_switch:Non wimax UART
[ 6463.672485] hsusb: ONLINE -> OFFLINE
[ 6463.673339] usb: lpm exit
[ 6463.675476] batt: Update SMEM: cable type 0 at 6460921730559 (2012-02-13 22:20:52.362020760 UTC)
[ 6463.676849] batt: batt:(htc_cable_status_update)power_supply_changed: battery at 6460929298918 (2012-02-13 22:20:52.363394051 UTC)
[ 6463.691833] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4142, batt_temp=343, batt_current=-228, eval_current=0, level=97, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0
[ 6463.706939] usb: notify offline
[ 6463.712707] msm_hsusb_phy_reset
[ 6463.713378]  at 6460959145109 (2012-02-13 22:20:52.378378183 UTC)
[ 6463.718719] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4142, batt_temp=343, batt_current=-228, eval_current=0, level=97, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6460982674162 (2012-02-13 22:20:52.405233651 UTC)
[ 6463.774322] usb: lpm enter
[ 6463.774597] usb_suspend_phy
[ 6463.775939] usb: send connect type 0
[ 6463.776092] batt:online=0
[ 6463.776245] batt: Update SMEM: cable type 0 at 6461022408051 (2012-02-13 22:20:52.462820323 UTC)
[ 6463.829681] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4142, batt_temp=343, batt_current=-228, eval_current=0, level=97, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6461075996920 (2012-02-13 22:20:52.516226086 UTC)
[ 6463.830444] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4142, batt_temp=343, batt_current=-228, eval_current=0, level=97, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6461076759859 (2012-02-13 22:20:52.517019543 UTC)
[ 6463.832183] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4142, batt_temp=343, batt_current=-228, eval_current=0, level=97, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6461101814791 (2012-02-13 22:20:52.518728528 UTC)
[ 6463.856445] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4142, batt_temp=343, batt_current=-228, eval_current=0, level=97, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6461116005465 (2012-02-13 22:20:52.543020520 UTC)
[ 6463.878021] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4142, batt_temp=343, batt_current=-228, eval_current=0, level=97, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6461138039157 (2012-02-13 22:20:52.564596448 UTC)
[ 6463.896820] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4142, batt_temp=343, batt_current=-228, eval_current=0, level=97, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6461159981296 (2012-02-13 22:20:52.583364760 UTC)
[ 6464.514343] mmc1: Bus clock timer expired
[ 6464.514892] set GPIO40 as waketup source
[ 6464.515808] mmc1: Disable clocks
[ 6464.516571] mmc1: Enable clocks
[ 6464.517059] disable GPIO40 wakeup source
[ 6464.549468] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6465.544342] mmc1: Bus clock timer expired
[ 6465.545257] set GPIO40 as waketup source
[ 6465.545776] mmc1: Disable clocks
[ 6465.546478] mmc1: Enable clocks
[ 6465.546966] disable GPIO40 wakeup source
[ 6465.579467] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6466.574371] mmc1: Bus clock timer expired
[ 6466.575317] set GPIO40 as waketup source
[ 6466.575836] mmc1: Disable clocks
[ 6466.576599] mmc1: Enable clocks
[ 6466.577087] disable GPIO40 wakeup source
[ 6466.609466] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6467.604370] mmc1: Bus clock timer expired
[ 6467.605316] set GPIO40 as waketup source
[ 6467.605834] mmc1: Disable clocks
[ 6467.606567] mmc1: Enable clocks
[ 6467.607452] disable GPIO40 wakeup source
[ 6467.639465] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6468.634368] mmc1: Bus clock timer expired
[ 6468.635314] set GPIO40 as waketup source
[ 6468.635833] mmc1: Disable clocks
[ 6468.636566] mmc1: Enable clocks
[ 6468.637420] disable GPIO40 wakeup source
[ 6468.669464] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6468.891021] PM: Syncing filesystems ... done.
[ 6468.893035] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 6468.915527] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6468.941345] msmsdcc_suspend enter
[ 6468.941741] supersonic_sdslot_switchvdd: Disabling SD slot power
[ 6468.942413] msmsdcc_suspend leave
[ 6468.942626] msmsdcc_suspend enter
[ 6468.942810] mmc1: Disable clocks in msmsdcc_suspend
[ 6468.943237] msmsdcc_suspend leave
[ 6468.943450] msmsdcc_suspend enter
[ 6468.943664] msmsdcc_suspend leave
[ 6468.944152] PM: suspend of devices complete after 8.544 msecs
[ 6468.944915] PM: late suspend of devices complete after 0.457 msecs
[ 6468.944915] clocks on: uart_clk
[ 6468.944915] [R] suspend end
[ 6468.944915] [R] resume start
[ 6468.945465] PM: early resume of devices complete after 0.640 msecs
[ 6468.946105] msmsdcc_resume enter
[ 6468.946624] msmsdcc_resume enter
[ 6468.947052] mmc1: Enable clocks
[ 6468.947479] msmsdcc_resume enter
[ 6468.953094] wakeup wake lock: SMD_RPCCALL
[ 6468.959228] PM: resume of devices complete after 13.183 msecs
[ 6468.960083] Restarting tasks ... done.
[ 6469.029968] suspend: exit suspend, ret = 0 (2012-02-13 22:24:18.571009963 UTC)
[ 6469.779479] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6469.794403] sequans_xxx: waking up the card...
[ 6469.796630] sequans_xxx: wait for completion (timeout 800 msec)...
[ 6470.594848] sequans_xxx: can't wake up the card - timeout elapsed
[ 6470.595794] sequans_xxx: retry wake up
[ 6470.598449] sequans_xxx: wait for completion (timeout 800 msec)...
[ 6470.785491] sequans_xxx: card is waked up successfully
[ 6478.093322] PM: Syncing filesystems ... done.
[ 6478.099212] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 6478.126281] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6478.160247] msmsdcc_suspend enter
[ 6478.160797] msmsdcc_suspend leave
[ 6478.161651] msmsdcc_suspend enter
[ 6478.162139] mmc1: Disable clocks in msmsdcc_suspend
[ 6478.162841] msmsdcc_suspend leave
[ 6478.163696] msmsdcc_suspend enter
[ 6478.164215] msmsdcc_suspend leave
[ 6478.164855] mmc1: Enable clocks
[ 6478.165954] PM: suspend of devices complete after 18.432 msecs
[ 6478.168090] PM: late suspend of devices complete after 1.190 msecs
[ 6478.168090] clocks on: uart_clk sdc_pclk sdc_clk
[ 6478.168090] [R] suspend end
[ 6478.168090] [R] resume start
[ 6478.168823] PM: early resume of devices complete after 0.854 msecs
[ 6478.170074] msmsdcc_resume enter
[ 6478.170715] msmsdcc_resume enter
[ 6478.171508] msmsdcc_resume enter
[ 6478.173645] wakeup wake lock: SMD_RPCCALL
[ 6478.174774] sequans_xxx: card switched to IDLE state
[ 6478.176025] sequans_xxx: card switched to IDLE state
[ 6478.176879] sequans_xxx: card switched to IDLE state
[ 6478.177734] sequans_xxx: card switched to IDLE state
[ 6478.178924] sequans_xxx: card switched to IDLE state
[ 6478.179809] sequans_xxx: card switched to IDLE state
[ 6478.181213] sequans_xxx: card switched to IDLE state
[ 6478.182098] sequans_xxx: card switched to IDLE state
[ 6478.185852] sequans_xxx: card switched to IDLE state
[ 6478.190429] sequans_xxx: card switched to IDLE state
[ 6478.195739] sequans_xxx: card switched to IDLE state
[ 6478.200286] sequans_xxx: card switched to IDLE state
[ 6478.205322] sequans_xxx: card switched to IDLE state
[ 6478.210510] sequans_xxx: card switched to IDLE state
[ 6478.215209] sequans_xxx: card switched to IDLE state
[ 6478.220428] sequans_xxx: card switched to IDLE state
[ 6478.225097] sequans_xxx: card switched to IDLE state
[ 6478.230316] sequans_xxx: card switched to IDLE state
[ 6478.235015] sequans_xxx: card switched to IDLE state
[ 6478.239929] sequans_xxx: card switched to IDLE state
[ 6478.245269] sequans_xxx: card switched to IDLE state
[ 6478.249847] sequans_xxx: card switched to IDLE state
[ 6478.255157] sequans_xxx: card switched to IDLE state
[ 6478.259704] sequans_xxx: card switched to IDLE state
[ 6478.265014] sequans_xxx: card switched to IDLE state
[ 6478.269622] sequans_xxx: card switched to IDLE state
[ 6478.274444] sequans_xxx: card switched to IDLE state
[ 6478.279083] sequans_xxx: card switched to IDLE state
[ 6478.284027] sequans_xxx: card switched to IDLE state
[ 6478.289062] sequans_xxx: card switched to IDLE state
[ 6478.293945] sequans_xxx: card switched to IDLE state
[ 6478.298950] sequans_xxx: card switched to IDLE state
[ 6478.303802] sequans_xxx: card switched to IDLE state
[ 6478.308868] sequans_xxx: card switched to IDLE state
[ 6478.313751] sequans_xxx: card switched to IDLE state
[ 6478.318664] sequans_xxx: card switched to IDLE state
[ 6478.323730] sequans_xxx: card switched to IDLE state
[ 6478.328552] sequans_xxx: card switched to IDLE state
[ 6478.333618] sequans_xxx: card switched to IDLE state
[ 6478.338439] sequans_xxx: card switched to IDLE state
[ 6478.343475] sequans_xxx: card switched to IDLE state
[ 6478.348358] sequans_xxx: card switched to IDLE state
[ 6478.353210] PM: resume of devices complete after 183.205 msecs
[ 6478.359039] sequans_xxx: card switched to IDLE state
[ 6478.364074] sequans_xxx: card switched to IDLE state
[ 6478.369110] sequans_xxx: card switched to IDLE state
[ 6478.373962] sequans_xxx: card switched to IDLE state
[ 6478.378997] sequans_xxx: card switched to IDLE state
[ 6478.383850] sequans_xxx: card switched to IDLE state
[ 6478.388916] sequans_xxx: card switched to IDLE state
[ 6478.393737] sequans_xxx: card switched to IDLE state
[ 6478.398803] sequans_xxx: card switched to IDLE state
[ 6478.403472] Restarting tasks ...
[ 6478.406677] sequans_xxx: card switched to IDLE state
[ 6478.411987] sequans_xxx: card switched to IDLE state
[ 6478.417236] sequans_xxx: card switched to IDLE state
[ 6478.421905] sequans_xxx: card switched to IDLE state
[ 6478.426757] sequans_xxx: card switched to IDLE state
[ 6478.431671] sequans_xxx: card switched to IDLE state
[ 6478.438049] sequans_xxx: card switched to IDLE state
[ 6478.441589] sequans_xxx: card switched to IDLE state
[ 6478.446655] sequans_xxx: card switched to IDLE state
[ 6478.451446] sequans_xxx: card switched to IDLE state
[ 6478.456542] sequans_xxx: card switched to IDLE state
[ 6478.461578] sequans_xxx: card switched to IDLE state
[ 6478.466644] sequans_xxx: card switched to IDLE state
[ 6478.471313] sequans_xxx: card switched to IDLE state
[ 6478.476257] sequans_xxx: card switched to IDLE state
[ 6478.481262] sequans_xxx: card switched to IDLE state
[ 6478.486145] sequans_xxx: card switched to IDLE state
[ 6478.491149] sequans_xxx: card switched to IDLE state
[ 6478.496002] sequans_xxx: card switched to IDLE state
[ 6478.501037] sequans_xxx: card switched to IDLE state
[ 6478.505920] sequans_xxx: card switched to IDLE state
[ 6478.510864] sequans_xxx: card switched to IDLE state
[ 6478.515899] sequans_xxx: card switched to IDLE state
[ 6478.520751] sequans_xxx: card switched to IDLE state
[ 6478.525817] sequans_xxx: card switched to IDLE state
[ 6478.530639] sequans_xxx: card switched to IDLE state
[ 6478.535705] sequans_xxx: card switched to IDLE state
[ 6478.540527] sequans_xxx: card switched to IDLE state
[ 6478.545593] sequans_xxx: card switched to IDLE state
[ 6478.550415] sequans_xxx: card switched to IDLE state
[ 6478.555389] sequans_xxx: card switched to IDLE state
[ 6478.560424] sequans_xxx: card switched to IDLE state
[ 6478.565307] sequans_xxx: card switched to IDLE state
[ 6478.570312] sequans_xxx: card switched to IDLE state
[ 6478.575164] sequans_xxx: card switched to IDLE state
[ 6478.580200] sequans_xxx: card switched to IDLE state
[ 6478.585083] sequans_xxx: card switched to IDLE state
[ 6478.590026] sequans_xxx: card switched to IDLE state
[ 6478.595062] sequans_xxx: card switched to IDLE state
[ 6478.599884] sequans_xxx: card switched to IDLE state
[ 6478.604949] sequans_xxx: card switched to IDLE state
[ 6478.609802] sequans_xxx: card switched to IDLE state
[ 6478.628417] sequans_xxx: waking up the card...
[ 6478.673889] done.
[ 6478.674072] suspend: exit suspend, ret = 0 (2012-02-13 22:26:09.845470491 UTC)
[ 6478.681610] sequans_xxx: wait for completion (timeout 800 msec)...
[ 6478.684783] sequans_xxx: card is waked up successfully
[ 6479.649291] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6480.637420] PM: Syncing filesystems ... done.
[ 6480.641571] Freezing user space processes ...
[ 6480.644256] mmc1: Bus clock timer expired
[ 6480.645111] set GPIO40 as waketup source
[ 6480.645904] mmc1: Disable clocks
[ 6480.646514] mmc1: Enable clocks
[ 6480.646972] disable GPIO40 wakeup source
[ 6480.669525] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6480.674774] (elapsed 0.03 seconds) done.
[ 6480.675628] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6480.708557] msmsdcc_suspend enter
[ 6480.709045] msmsdcc_suspend leave
[ 6480.709838] msmsdcc_suspend enter
[ 6480.710266] mmc1: Disable clocks in msmsdcc_suspend
[ 6480.710876] msmsdcc_suspend leave
[ 6480.711669] msmsdcc_suspend enter
[ 6480.712127] msmsdcc_suspend leave
[ 6480.712982] PM: suspend of devices complete after 16.204 msecs
[ 6480.714996] PM: late suspend of devices complete after 1.159 msecs
[ 6480.714996] clocks on: uart_clk
[ 6480.714996] [R] suspend end
[ 6480.714996] [R] resume start
[ 6480.714996] wakeup wake lock: SMD_DS
[ 6480.716522] PM: early resume of devices complete after 1.708 msecs
[ 6480.718017] msmsdcc_resume enter
[ 6480.718750] msmsdcc_resume enter
[ 6480.719635] mmc1: Enable clocks
[ 6480.720794] msmsdcc_resume enter
[ 6480.730102] PM: resume of devices complete after 12.237 msecs
[ 6480.731750] Restarting tasks ... done.
[ 6480.799591] suspend: exit suspend, ret = 0 (2012-02-13 22:28:30.569937214 UTC)
[ 6481.759002] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6481.764373] PM: Syncing filesystems ... done.
[ 6481.769409] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 6481.795623] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6481.840026] msmsdcc_suspend enter
[ 6481.840545] msmsdcc_suspend leave
[ 6481.841033] msmsdcc_suspend enter
[ 6481.841888] mmc1: Disable clocks in msmsdcc_suspend
[ 6481.842620] msmsdcc_suspend leave
[ 6481.843109] msmsdcc_suspend enter
[ 6481.844177] msmsdcc_suspend leave
[ 6481.845123] PM: suspend of devices complete after 27.885 msecs
[ 6481.846923] PM: late suspend of devices complete after 1.250 msecs
[ 6481.846923] clocks on: uart_clk
[ 6481.846923] [R] suspend end
[ 6481.846923] [R] resume start
[ 6481.846923] wakeup wake lock: SMD_RPCCALL
[ 6481.847778] batt: M2A_RPC: level_update: 96 at 6479095845307 (2012-02-13 22:28:31.618941800 UTC)
[ 6481.849212] batt: batt:power_supply_changed: battery at 6479097279239 (2012-02-13 22:28:31.620406242 UTC)
[ 6481.851928] PM: early resume of devices complete after 5.125 msecs
[ 6481.853271] msmsdcc_resume enter
[ 6481.854003] msmsdcc_resume enter
[ 6481.854858] mmc1: Enable clocks
[ 6481.855499] msmsdcc_resume enter
[ 6481.873748] PM: resume of devices complete after 20.651 msecs
[ 6481.875579] Restarting tasks ...
[ 6481.892486] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4072, batt_temp=337, batt_current=0, eval_current=282, level=96, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0done.
[ 6481.933380] suspend: exit suspend, ret = 0 (2012-02-13 22:33:40.560102417 UTC)
[ 6481.934020]  at 6479181480448 (2012-02-13 22:33:40.519240895 UTC)
[ 6481.935546] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4072, batt_temp=337, batt_current=0, eval_current=282, level=96, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6479184194476 (2012-02-13 22:33:40.562267540 UTC)
[ 6481.985107] PM: Syncing filesystems ... done.
[ 6481.987030] Freezing user space processes ...
[ 6481.990875] Freezing of user space  aborted
[ 6481.991699]
[ 6481.991821] Restarting tasks ... done.
[ 6481.998077] suspend: exit suspend, ret = -16 (2012-02-13 22:33:40.624816153 UTC)
[ 6482.004455] PM: Syncing filesystems ... done.
[ 6482.008148] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6482.023590] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6482.054840] msmsdcc_suspend enter
[ 6482.055084] msmsdcc_suspend leave
[ 6482.055267] msmsdcc_suspend enter
[ 6482.055541] mmc1: Disable clocks in msmsdcc_suspend
[ 6482.055816] msmsdcc_suspend leave
[ 6482.055969] msmsdcc_suspend enter
[ 6482.056335] msmsdcc_suspend leave
[ 6482.056671] PM: suspend of devices complete after 12.779 msecs
[ 6482.057281] PM: late suspend of devices complete after 0.426 msecs
[ 6482.057281] clocks on: uart_clk
[ 6482.057281] [R] suspend end
[ 6482.057281] [R] resume start
[ 6482.057800] PM: early resume of devices complete after 0.640 msecs
[ 6482.058410] msmsdcc_resume enter
[ 6482.059020] msmsdcc_resume enter
[ 6482.059234] mmc1: Enable clocks
[ 6482.059600] msmsdcc_resume enter
[ 6482.065124] wakeup wake lock: SMD_RPCCALL
[ 6482.071166] PM: resume of devices complete after 12.809 msecs
[ 6482.071960] Restarting tasks ... done.
[ 6482.137573] suspend: exit suspend, ret = 0 (2012-02-13 22:34:26.566599621 UTC)
[ 6483.158538] PM: Syncing filesystems ... done.
[ 6483.162933] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 6483.194885] Freezing remaining freezable tasks ...
[ 6483.197235] Freezing of tasks  aborted
[ 6483.199035]
[ 6483.199493] Restarting tasks ... done.
[ 6483.235717] suspend: exit suspend, ret = -16 (2012-02-13 22:34:27.664332028 UTC)
[ 6483.242340] PM: Syncing filesystems ... done.
[ 6483.244476] Freezing user space processes ...
[ 6483.267761] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6483.268402] (elapsed 0.02 seconds) done.
[ 6483.268768] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6483.297088] msmsdcc_suspend enter
[ 6483.297515] msmsdcc_suspend leave
[ 6483.297729] msmsdcc_suspend enter
[ 6483.297973] mmc1: Disable clocks in msmsdcc_suspend
[ 6483.298492] msmsdcc_suspend leave
[ 6483.298706] msmsdcc_suspend enter
[ 6483.298980] msmsdcc_suspend leave
[ 6483.299560] PM: suspend of devices complete after 14.950 msecs
[ 6483.300415] PM: late suspend of devices complete after 0.579 msecs
[ 6483.300415] clocks on: uart_clk
[ 6483.300415] [R] suspend end
[ 6483.300415] [R] resume start
[ 6483.300994] PM: early resume of devices complete after 0.732 msecs
[ 6483.301910] msmsdcc_resume enter
[ 6483.302520] msmsdcc_resume enter
[ 6483.302825] mmc1: Enable clocks
[ 6483.303466] msmsdcc_resume enter
[ 6483.309112] wakeup wake lock: SMD_RPCCALL
[ 6483.315734] PM: resume of devices complete after 13.913 msecs
[ 6483.316894] Restarting tasks ...
[ 6483.332946] sequans_xxx: waking up the card...
[ 6483.336029] sequans_xxx: wait for completion (timeout 800 msec)...
[ 6483.380645] done.
[ 6483.380828] suspend: exit suspend, ret = 0 (2012-02-13 22:35:20.565348939 UTC)
[ 6484.132476] sequans_xxx: can't wake up the card - timeout elapsed
[ 6484.133087] sequans_xxx: retry wake up
[ 6484.136108] sequans_xxx: wait for completion (timeout 800 msec)...
[ 6484.273681] sequans_xxx: card is waked up successfully
[ 6488.052093] PM: Syncing filesystems ... done.
[ 6488.057495] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 6488.084594] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6488.120361] msmsdcc_suspend enter
[ 6488.121246] msmsdcc_suspend leave
[ 6488.121765] msmsdcc_suspend enter
[ 6488.122253] mmc1: Disable clocks in msmsdcc_suspend
[ 6488.123504] msmsdcc_suspend leave
[ 6488.124023] msmsdcc_suspend enter
[ 6488.124542] msmsdcc_suspend leave
[ 6488.125823] PM: suspend of devices complete after 19.897 msecs
[ 6488.127563] PM: late suspend of devices complete after 1.159 msecs
[ 6488.127563] clocks on: uart_clk
[ 6488.127563] [R] suspend end
[ 6488.127563] [R] resume start
[ 6488.128479] PM: early resume of devices complete after 1.037 msecs
[ 6488.129974] msmsdcc_resume enter
[ 6488.130706] msmsdcc_resume enter
[ 6488.131774] mmc1: Enable clocks
[ 6488.132507] msmsdcc_resume enter
[ 6488.134979] wakeup wake lock: SMD_RPCCALL
[ 6488.140380] PM: resume of devices complete after 10.589 msecs
[ 6488.142333] Restarting tasks ... done.
[ 6488.164764] suspend: exit suspend, ret = 0 (2012-02-13 22:35:27.524841300 UTC)
[ 6488.308715] PM: Syncing filesystems ... done.
[ 6488.312835] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 6488.342926] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6488.383178] msmsdcc_suspend enter
[ 6488.383911] msmsdcc_suspend leave
[ 6488.384399] msmsdcc_suspend enter
[ 6488.384887] mmc1: Disable clocks in msmsdcc_suspend
[ 6488.385925] msmsdcc_suspend leave
[ 6488.386444] msmsdcc_suspend enter
[ 6488.387084] msmsdcc_suspend leave
[ 6488.388336] PM: suspend of devices complete after 23.272 msecs
[ 6488.390075] PM: late suspend of devices complete after 1.159 msecs
[ 6488.390075] clocks on: uart_clk
[ 6488.390075] [R] suspend end
[ 6488.390075] [R] resume start
[ 6488.390472] mmc1: Enable clocks
[ 6488.391998] PM: early resume of devices complete after 2.074 msecs
[ 6488.393096] msmsdcc_resume enter
[ 6488.394226] msmsdcc_resume enter
[ 6488.395019] wakeup wake lock: sqnsdio
[ 6488.395965] sequans_xxx: card switched to IDLE state
[ 6488.397430] sequans_xxx: card switched to IDLE state
[ 6488.398101] msmsdcc_disable_clocks [WiMAX] mmc1 curr.mrq != NULL
[ 6488.399353] sequans_xxx: card switched to IDLE state
[ 6488.400878] sequans_xxx: card switched to IDLE state
[ 6488.401885] msmsdcc_resume enter
[ 6488.402709] sequans_xxx: card switched to IDLE state
[ 6488.403747] sequans_xxx: card switched to IDLE state
[ 6488.406005] sequans_xxx: card switched to IDLE state
[ 6488.410552] sequans_xxx: card switched to IDLE state
[ 6488.415802] sequans_xxx: card switched to IDLE state
[ 6488.420410] sequans_xxx: card switched to IDLE state
[ 6488.425415] sequans_xxx: card switched to IDLE state
[ 6488.430633] sequans_xxx: card switched to IDLE state
[ 6488.435241] sequans_xxx: card switched to IDLE state
[ 6488.440612] sequans_xxx: card switched to IDLE state
[ 6488.445129] sequans_xxx: card switched to IDLE state
[ 6488.450439] sequans_xxx: card switched to IDLE state
[ 6488.455139] sequans_xxx: card switched to IDLE state
[ 6488.460021] sequans_xxx: card switched to IDLE state
[ 6488.465332] sequans_xxx: card switched to IDLE state
[ 6488.469940] sequans_xxx: card switched to IDLE state
[ 6488.475280] sequans_xxx: card switched to IDLE state
[ 6488.479827] sequans_xxx: card switched to IDLE state
[ 6488.485168] sequans_xxx: card switched to IDLE state
[ 6488.489624] sequans_xxx: card switched to IDLE state
[ 6488.495056] sequans_xxx: card switched to IDLE state
[ 6488.499389] sequans_xxx: card switched to IDLE state
[ 6488.503997] sequans_xxx: card switched to IDLE state
[ 6488.509002] sequans_xxx: card switched to IDLE state
[ 6488.513885] sequans_xxx: card switched to IDLE state
[ 6488.518920] sequans_xxx: card switched to IDLE state
[ 6488.523773] sequans_xxx: card switched to IDLE state
[ 6488.528900] sequans_xxx: card switched to IDLE state
[ 6488.534973] PM: resume of devices complete after 141.990 msecs
[ 6488.539581] Restarting tasks ...
[ 6488.555816] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6488.600341] done.
[ 6488.600585] suspend: exit suspend, ret = 0 (2012-02-13 22:36:06.565715679 UTC)
[ 6488.883880] sequans_xxx: waking up the card...
[ 6488.886993] sequans_xxx: wait for completion (timeout 800 msec)...
[ 6489.562103] sequans_xxx: card is waked up successfully
[ 6490.661712] PM: Syncing filesystems ... done.
[ 6490.666778] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 6490.693420] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6490.726135] msmsdcc_suspend enter
[ 6490.726654] msmsdcc_suspend leave
[ 6490.727539] msmsdcc_suspend enter
[ 6490.728027] mmc1: Disable clocks in msmsdcc_suspend
[ 6490.728729] msmsdcc_suspend leave
[ 6490.729614] msmsdcc_suspend enter
[ 6490.730102] msmsdcc_suspend leave
[ 6490.731140] mmc1: Enable clocks
[ 6490.732299] PM: suspend of devices complete after 18.187 msecs
[ 6490.734069] PM: late suspend of devices complete after 1.220 msecs
[ 6490.734069] clocks on: uart_clk sdc_pclk sdc_clk
[ 6490.734069] [R] suspend end
[ 6490.734069] [R] resume start
[ 6490.734069] wakeup wake lock: SMD_RPCCALL
[ 6490.734893] batt: M2A_RPC: level_update: 95 at 6487985723613 (2012-02-13 22:36:08.700729067 UTC)
[ 6490.736358] batt: batt:power_supply_changed: battery at 6487987157878 (2012-02-13 22:36:08.702163332 UTC)
[ 6490.739044] PM: early resume of devices complete after 5.126 msecs
[ 6490.740539] msmsdcc_resume enter
[ 6490.741241] msmsdcc_resume enter
[ 6490.742126] msmsdcc_resume enter
[ 6490.748901] PM: resume of devices complete after 8.605 msecs
[ 6490.750793] Restarting tasks ...
[ 6490.764984] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4075, batt_temp=330, batt_current=0, eval_current=216, level=95, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6488016878949 (2012-02-13 22:36:10.516446918 UTC)
[ 6490.767730] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4075, batt_temp=330, batt_current=0, eval_current=216, level=95, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0done.
[ 6490.789184] suspend: exit suspend, ret = 0 (2012-02-13 22:36:10.540666269 UTC)
[ 6490.793457] PM: Syncing filesystems ... done.
[ 6490.797454] Freezing user space processes ...  at 6488057350182 (2012-02-13 22:36:10.519192664 UTC)
[ 6490.820465] (elapsed 0.02 seconds) done.
[ 6490.821319] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6490.850158] msmsdcc_suspend enter
[ 6490.850708] msmsdcc_suspend leave
[ 6490.851501] msmsdcc_suspend enter
[ 6490.851959] mmc1: Disable clocks in msmsdcc_suspend
[ 6490.852508] msmsdcc_suspend leave
[ 6490.853271] msmsdcc_suspend enter
[ 6490.853851] msmsdcc_suspend leave
[ 6490.854705] PM: suspend of devices complete after 12.321 msecs
[ 6490.856567] PM: late suspend of devices complete after 1.006 msecs
[ 6490.856567] clocks on: uart_clk
[ 6490.856567] [R] suspend end
[ 6490.856567] [R] resume start
[ 6490.856567] wakeup wake lock: SMD_RPCCALL
[ 6490.857391] batt: M2A_RPC: level_update: 94 at 6488109286640 (2012-02-13 22:36:10.609617549 UTC)
[ 6490.858825] batt: batt:power_supply_changed: battery
[ 6490.859924] mmc1: Enable clocks
[ 6490.861602]  at 6488112611172 (2012-02-13 22:36:10.611081562 UTC)
[ 6490.863464] PM: early resume of devices complete after 7.076 msecs
[ 6490.864685] msmsdcc_resume enter
[ 6490.865417] msmsdcc_resume enter
[ 6490.866271] msmsdcc_resume enter
[ 6490.874450] PM: resume of devices complete after 9.972 msecs
[ 6490.875732] Restarting tasks ... done.
[ 6490.940246] suspend: exit suspend, ret = 0 (2012-02-13 22:40:10.566169556 UTC)
[ 6490.945159] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4054, batt_temp=324, batt_current=0, eval_current=284, level=94, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6488196652051 (2012-02-13 22:40:10.571110116 UTC)
[ 6490.945922] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4054, batt_temp=324, batt_current=0, eval_current=284, level=94, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6488197414483 (2012-02-13 22:40:10.571903045 UTC)
[ 6491.021148] PM: Syncing filesystems ... done.
[ 6491.023193] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6491.039916] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 6491.073181] msmsdcc_suspend enter
[ 6491.073730] msmsdcc_suspend leave
[ 6491.074340] msmsdcc_suspend enter
[ 6491.074676] mmc1: Disable clocks in msmsdcc_suspend
[ 6491.075195] msmsdcc_suspend leave
[ 6491.075775] msmsdcc_suspend enter
[ 6491.076263] msmsdcc_suspend leave
[ 6491.076904] PM: suspend of devices complete after 14.792 msecs
[ 6491.078369] PM: late suspend of devices complete after 0.823 msecs
[ 6491.078369] clocks on: uart_clk
[ 6491.078369] [R] suspend end
[ 6491.078369] [R] resume start
[ 6491.078765] mmc1: Enable clocks
[ 6491.079833] PM: early resume of devices complete after 1.586 msecs
[ 6491.080871] msmsdcc_resume enter
[ 6491.081481] msmsdcc_resume enter
[ 6491.081848] msmsdcc_resume enter
[ 6491.085205] wakeup wake lock: SMD_RPCCALL
[ 6491.088348] PM: resume of devices complete after 7.594 msecs
[ 6491.089416] Restarting tasks ... done.
[ 6491.118225] suspend: exit suspend, ret = 0 (2012-02-13 22:41:09.530190906 UTC)
[ 6491.174438] PM: Syncing filesystems ... done.
[ 6491.176635] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 6491.199371] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6491.224853] msmsdcc_suspend enter
[ 6491.225097] msmsdcc_suspend leave
[ 6491.225372] msmsdcc_suspend enter
[ 6491.225555] mmc1: Disable clocks in msmsdcc_suspend
[ 6491.225769] msmsdcc_suspend leave
[ 6491.226043] msmsdcc_suspend enter
[ 6491.226287] msmsdcc_suspend leave
[ 6491.226562] PM: suspend of devices complete after 6.770 msecs
[ 6491.227233] PM: late suspend of devices complete after 0.365 msecs
[ 6491.227233] clocks on: uart_clk
[ 6491.227233] [R] suspend end
[ 6491.227233] [R] resume start
[ 6491.227233] wakeup wake lock: SMD_RPCCALL
[ 6491.227661] batt: M2A_RPC: level_update: 93 at 6488479848763 (2012-02-13 22:41:09.639947559 UTC)
[ 6491.228424] mmc1: Enable clocks
[ 6491.229125] batt: batt:power_supply_changed: battery at 6488481831047 (2012-02-13 22:41:09.641441897 UTC)
[ 6491.231994] PM: early resume of devices complete after 4.848 msecs
[ 6491.233886] msmsdcc_resume enter
[ 6491.234802] msmsdcc_resume enter
[ 6491.235290] msmsdcc_resume enter
[ 6491.243103] PM: resume of devices complete after 9.697 msecs
[ 6491.244384] Restarting tasks ...
[ 6491.294586] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4052, batt_temp=321, batt_current=0, eval_current=234, level=93, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0done.
[ 6491.300109] suspend: exit suspend, ret = 0 (2012-02-13 22:43:40.557478584 UTC)
[ 6491.301147]  at 6488552880033 (2012-02-13 22:43:40.551959037 UTC)
[ 6491.302276] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4052, batt_temp=321, batt_current=0, eval_current=234, level=93, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6488555533133 (2012-02-13 22:43:40.559643758 UTC)
[ 6491.365234] PM: Syncing filesystems ... done.
[ 6491.367248] Freezing user space processes ...
[ 6491.371215] Freezing of user space  aborted
[ 6491.372009]
[ 6491.372253] Restarting tasks ... done.
[ 6491.379394] suspend: exit suspend, ret = -16 (2012-02-13 22:43:40.636739463 UTC)
[ 6491.400329] PM: Syncing filesystems ... done.
[ 6491.402252] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6491.419250] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6491.446868] msmsdcc_suspend enter
[ 6491.447296] msmsdcc_suspend leave
[ 6491.447814] msmsdcc_suspend enter
[ 6491.448150] mmc1: Disable clocks in msmsdcc_suspend
[ 6491.448669] msmsdcc_suspend leave
[ 6491.449218] msmsdcc_suspend enter
[ 6491.449615] msmsdcc_suspend leave
[ 6491.450195] PM: suspend of devices complete after 9.912 msecs
[ 6491.451446] PM: late suspend of devices complete after 0.671 msecs
[ 6491.451446] clocks on: uart_clk
[ 6491.451446] [R] suspend end
[ 6491.451446] [R] resume start
[ 6491.451446] wakeup wake lock: SMD_RPCCALL
[ 6491.452331] batt: M2A_RPC: level_update: 92 at 6488704911762 (2012-02-13 22:43:40.710181137 UTC)
[ 6491.453094] batt: batt:power_supply_changed: battery at 6488705918300 (2012-02-13 22:43:40.710974167 UTC)
[ 6491.455078] PM: early resume of devices complete after 3.751 msecs
[ 6491.456237] msmsdcc_resume enter
[ 6491.456848] msmsdcc_resume enter
[ 6491.457183] mmc1: Enable clocks
[ 6491.457916] mmc1: Enable clocks
[ 6491.458496] msmsdcc_resume enter
[ 6491.465667] PM: resume of devices complete after 9.546 msecs
[ 6491.466857] Restarting tasks ...
[ 6491.496765] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4044, batt_temp=318, batt_current=0, eval_current=284, level=92, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0done.
[ 6491.519348] suspend: exit suspend, ret = 0 (2012-02-13 22:45:42.553946269 UTC)
[ 6491.525268]  at 6488777370974 (2012-02-13 22:45:42.531381041 UTC)
[ 6491.526824] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4044, batt_temp=318, batt_current=0, eval_current=284, level=92, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6488817140340 (2012-02-13 22:45:42.561417461 UTC)
[ 6491.661956] PM: Syncing filesystems ... done.
[ 6491.663879] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 6491.688842] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6491.720916] msmsdcc_suspend enter
[ 6491.721679] msmsdcc_suspend leave
[ 6491.722045] msmsdcc_suspend enter
[ 6491.722381] mmc1: Disable clocks in msmsdcc_suspend
[ 6491.723022] msmsdcc_suspend leave
[ 6491.723358] msmsdcc_suspend enter
[ 6491.723876] msmsdcc_suspend leave
[ 6491.724487] PM: suspend of devices complete after 14.031 msecs
[ 6491.725982] PM: late suspend of devices complete after 0.823 msecs
[ 6491.725982] clocks on: uart_clk sdc_pclk sdc_clk
[ 6491.725982] [R] suspend end
[ 6491.725982] [R] resume start
[ 6491.725982] wakeup wake lock: SMD_RPCCALL
[ 6491.726867] batt: M2A_RPC: level_update: 91
[ 6491.727386] mmc1: Enable clocks
[ 6491.728149]  at 6488981044403 (2012-02-13 22:45:42.762285021 UTC)
[ 6491.728820] batt: batt:power_supply_changed: battery at 6488982112022 (2012-02-13 22:45:42.764237241 UTC)
[ 6491.730804] PM: early resume of devices complete after 4.941 msecs
[ 6491.731719] msmsdcc_resume enter
[ 6491.732543] msmsdcc_resume enter
[ 6491.732879] msmsdcc_resume enter
[ 6491.739532] PM: resume of devices complete after 7.930 msecs
[ 6491.741210] Restarting tasks ...
[ 6491.788970] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4046, batt_temp=318, batt_current=0, eval_current=220, level=91, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6489042492933 (2012-02-13 22:47:10.549918920 UTC)
[ 6491.789855] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4046, batt_temp=318, batt_current=0, eval_current=220, level=91, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6489043285774 (2012-02-13 22:47:10.550803243 UTC)
[ 6491.797760] done.
[ 6491.797912] suspend: exit suspend, ret = 0 (2012-02-13 22:47:10.558853649 UTC)
[ 6491.833984] PM: Syncing filesystems ... done.
[ 6491.838684] Freezing user space processes ...
[ 6491.843292] Freezing of user space  aborted
[ 6491.844085]
[ 6491.844207] Restarting tasks ... done.
[ 6491.856719] suspend: exit suspend, ret = -16 (2012-02-13 22:47:10.617622890 UTC)
[ 6491.879150] PM: Syncing filesystems ... done.
[ 6491.885253] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 6491.908721] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6491.938507] msmsdcc_suspend enter
[ 6491.938934] msmsdcc_suspend leave
[ 6491.939208] msmsdcc_suspend enter
[ 6491.939697] mmc1: Disable clocks in msmsdcc_suspend
[ 6491.940002] msmsdcc_suspend leave
[ 6491.940277] msmsdcc_suspend enter
[ 6491.940887] msmsdcc_suspend leave
[ 6491.941375] PM: suspend of devices complete after 12.138 msecs
[ 6491.942352] PM: late suspend of devices complete after 0.640 msecs
[ 6491.942352] clocks on: uart_clk sdc_pclk sdc_clk
[ 6491.942352] [R] suspend end
[ 6491.942352] [R] resume start
[ 6491.942352] wakeup wake lock: SMD_RPCCALL
[ 6491.942962] batt: M2A_RPC: level_update: 90 at 6489196810751 (2012-02-13 22:47:10.704511103 UTC)
[ 6491.943908] batt: batt:power_supply_changed: battery at 6489197786768 (2012-02-13 22:47:10.705487120 UTC)
[ 6491.945892] PM: early resume of devices complete after 3.660 msecs
[ 6491.946655] mmc1: Enable clocks
[ 6491.948333] msmsdcc_resume enter
[ 6491.949218] msmsdcc_resume enter
[ 6491.949707] msmsdcc_resume enter
[ 6491.957397] PM: resume of devices complete after 9.576 msecs
[ 6491.959075] Restarting tasks ... done.
[ 6491.984313] suspend: exit suspend, ret = 0 (2012-02-13 22:48:40.527321060 UTC)
[ 6492.079772] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4043, batt_temp=318, batt_current=0, eval_current=218, level=90, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6489333612176 (2012-02-13 22:48:40.622771349 UTC)
[ 6492.080566] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4043, batt_temp=318, batt_current=0, eval_current=218, level=90, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6489334374569 (2012-02-13 22:48:40.623533742 UTC)
[ 6492.158630] PM: Syncing filesystems ... done.
[ 6492.160522] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6492.177490] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6492.204376] msmsdcc_suspend enter
[ 6492.204986] msmsdcc_suspend leave
[ 6492.205291] msmsdcc_suspend enter
[ 6492.205566] mmc1: Disable clocks in msmsdcc_suspend
[ 6492.206085] msmsdcc_suspend leave
[ 6492.206359] msmsdcc_suspend enter
[ 6492.206726] mmc1: Enable clocks
[ 6492.207366] msmsdcc_suspend leave
[ 6492.207916] PM: suspend of devices complete after 9.394 msecs
[ 6492.208892] PM: late suspend of devices complete after 0.640 msecs
[ 6492.208892] clocks on: uart_clk sdc_pclk sdc_clk
[ 6492.208892] [R] suspend end
[ 6492.208892] [R] resume start
[ 6492.209716] PM: early resume of devices complete after 0.793 msecs
[ 6492.210266] wakeup wake lock: gpio_input
[ 6492.211181] msmsdcc_resume enter
[ 6492.211730] msmsdcc_resume enter
[ 6492.212097] msmsdcc_resume enter
[ 6492.223449] PM: resume of devices complete after 12.384 msecs
[ 6492.224304] Restarting tasks ... done.
[ 6492.240264] suspend: exit suspend, ret = 0 (2012-02-13 22:48:55.517080693 UTC)
[ 6492.251068] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
[ 6492.254089] request_suspend_state: wakeup (3->0) at 6489508070246 (2012-02-13 22:48:55.530864270 UTC)
[ 6492.255126] lightsensor_ioctl set value = 1
[ 6492.255737] lightsensor_enable
[ 6492.256652] [R] late_resume start
[ 6492.257019] sequans_xxx: sqn_handle_android_late_resume: enter
[ 6492.257659] sequans_xxx: sqn_handle_android_late_resume: leave
[ 6492.260406] lightsensor_enable: microp is suspended
[ 6492.264099] set brightness = 17
[ 6492.281311] set brightness = 34
[ 6492.297943] set brightness = 51
[ 6492.313781] set brightness = 68
[ 6492.330383] set brightness = 85
[ 6492.346527] sequans_xxx: got RX data, card is not asleep
[ 6492.347869] set brightness = 102
[ 6492.356231] mddi_wait_interrupt 1247, timeout waiting for 4000, INT = 4, STAT = 4 gotint = 2a004
[ 6492.364440] set brightness = 119
[ 6492.381134] set brightness = 136
[ 6492.396911] set brightness = 153
[ 6492.412658] set brightness = 170
[ 6492.429321] set brightness = 187
[ 6492.439819] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
[ 6492.445068] set brightness = 204
[ 6492.456329] mddi_wait_interrupt 1247, timeout waiting for 20000, INT = 8, STAT = 8 gotint = a004
[ 6492.456665] mddi_epson_power: power on.
[ 6492.460784] set brightness = 221
[ 6492.467041] __spi_bma150_set_mode: BMA get into NORMAL mode!
[ 6492.477569] set brightness = 238
[ 6492.491577] sequans_xxx: waking up the card...
[ 6492.493896] sequans_xxx: wait for completion (timeout 800 msec)...
[ 6492.494750] set brightness = 255
[ 6492.556518] sequans_xxx: got RX data, card is not asleep
[ 6492.559204] sequans_xxx: card is waked up successfully
[ 6492.773132] msmfb: ready, waiting for full update
[ 6492.779846] [CAM]ov8810_resume
[ 6492.780090] __capella_cm3602_power: Turn the capella_cm3602 power on
[ 6492.780364] [hdmi/fb]hdmifb_resume
[ 6492.780609] [hdmi/lcdc]lcdc_resume
[ 6492.780761] [hdmi/tx]hdmi_panel_init
[ 6492.780944] [hdmi]suc_hdmi_gpio_on
[ 6492.781555] [hdmi]hdmi_power(5)
[ 6492.781738] [R] late_resume end
[ 6492.786804] msmfb: pan_update in state(1)
[ 6492.786804] msmfb: full update starting
[ 6492.787628] Touch Status: 0x01 0x10 0xEA 0xD8 0x09
[ 6492.793212] Touch Status: 0x01 0x00 0xEA 0xD8 0x09
[ 6492.821502] msmfb: full update completed
[ 6492.821777] msmfb: turning on panel
[ 6492.822021] supersonic_panel_unblank
[ 6492.822387] turn on backlight
[ 6492.822601] set brightness = 255
[ 6493.637390] ALS value: 0x0, level: 0 #
[ 6493.757385] ALS value: 0x0, level: 0 #
[ 6496.518005] ALS value: 0x2, level: 0 #
[ 6497.458007] ALS value: 0x0, level: 0 #
[ 6497.838073] set brightness = 0
[ 6497.838989] request_suspend_state: sleep (0->3) at 6495091808306 (2012-02-13 22:49:00.850020673 UTC)
[ 6497.839965] [R] early_suspend start
[ 6497.840789] lightsensor_ioctl set value = 0
[ 6497.841247] lightsensor_disable
[ 6497.937805] __spi_bma150_set_mode: BMA get into SLEEP mode!
[ 6497.938323] bma150_early_suspend: spi_bma150_set_mode returned = 0!
[ 6497.956939] supersonic_panel_blank
[ 6497.957550] set brightness = 0
[ 6497.958648] [hdmi/fb]hdmifb_suspend, use_count=0
[ 6497.959442] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
[ 6497.959930] [hdmi/lcdc]lcdc_suspend
[ 6497.960388] [hdmi/tx]hdmi_panel_uninit
[ 6497.961181] [hdmi]suc_hdmi_gpio_off
[ 6497.962310] [hdmi/tx]suspending=true, disable timer
[ 6497.962768] [hdmi/tx]hdmi_panel_uninit
[ 6497.963226] [hdmi/tx]hdmi_standby
[ 6497.963684] [hdmi]hdmi_power(4)
[ 6497.964111] [hdmi/lcdc]lcdc_disable_video, blank_count=0
[ 6498.019317] __capella_cm3602_power: Turn the capella_cm3602 power off
[ 6498.019592] atmel_ts_suspend: enter
[ 6498.107940] __spi_bma150_set_mode: BMA get into SLEEP mode!
[ 6498.127319] mddi_epson_power: power off.
[ 6498.298034] set GPIO40 as waketup source
[ 6498.298675] mmc1: Disable clocks
[ 6498.299194] sequans_xxx: sqn_handle_android_early_suspend: enter
[ 6498.300079] sequans_xxx: sqn_handle_android_early_suspend: leave
[ 6498.300628] [R] early_suspend: sync
[ 6498.307312] mmc1: Enable clocks
[ 6498.307830] disable GPIO40 wakeup source
[ 6498.405548] [R] early_suspend end
[ 6499.078002] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
[ 6499.082336] request_suspend_state: wakeup (3->0) at 6496335122857 (2012-02-13 22:49:02.093304706 UTC)
[ 6499.084045] lightsensor_ioctl set value = 1
[ 6499.084564] lightsensor_enable
[ 6499.085052] lightsensor_enable: microp is suspended
[ 6499.086395] [R] late_resume start
[ 6499.086914] sequans_xxx: sqn_handle_android_late_resume: enter
[ 6499.092376] sequans_xxx: sqn_handle_android_late_resume: leave
[ 6499.096862] set brightness = 17
[ 6499.099731] set brightness = 18
[ 6499.117156] set brightness = 19
[ 6499.135528] set brightness = 20
[ 6499.147705] __spi_bma150_set_mode: BMA get into NORMAL mode!
[ 6499.149719] set brightness = 21
[ 6499.167938] set brightness = 23
[ 6499.184112] set brightness = 24
[ 6499.187438] mddi_wait_interrupt 2146, timeout waiting for 4000, INT = 4, STAT = 4 gotint = 2a004
[ 6499.201507] set brightness = 25
[ 6499.218597] set brightness = 26
[ 6499.235290] set brightness = 27
[ 6499.252258] set brightness = 29
[ 6499.268066] set brightness = 30
[ 6499.283935] set brightness = 31
[ 6499.287384] mddi_wait_interrupt 2146, timeout waiting for 20000, INT = 8, STAT = 8 gotint = a004
[ 6499.287719] mddi_epson_power: power on.
[ 6499.300872] set brightness = 32
[ 6499.317443] set brightness = 33
[ 6499.318420] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
[ 6499.319122] batt: tps65200_int_detection: over voltage is detected. at 6496572885204 (2012-02-13 22:49:02.330151526 UTC)
[ 6499.339233] set brightness = 35
[ 6499.355987] set brightness = 36
[ 6499.373168] set brightness = 37
[ 6499.389312] set brightness = 38
[ 6499.405151] set brightness = 39
[ 6499.421051] set brightness = 41
[ 6499.436767] set brightness = 42
[ 6499.453552] set brightness = 43
[ 6499.470642] set brightness = 44
[ 6499.486572] set brightness = 45
[ 6499.502197] set brightness = 47
[ 6499.517303] Switch charger CHECK_INT2
[ 6499.518981] TPS65200 INT2 80
[ 6499.519500] batt: Read TPS65200 INT2 register value: 80 at 6496772866831 (2012-02-13 22:49:02.530529882 UTC)
[ 6499.520935] Switch charger CHECK_INT2
[ 6499.521667] set brightness = 48
[ 6499.522613] TPS65200 INT2 0
[ 6499.523101] batt: Read TPS65200 INT2 register value: 0 at 6496776834115 (2012-02-13 22:49:02.534161472 UTC)
[ 6499.524536] Switch charger CHECK_INT2
[ 6499.526092] TPS65200 INT2 0
[ 6499.526580] batt: Read TPS65200 INT2 register value: 0 at 6496779946907 (2012-02-13 22:49:02.537609957 UTC)
[ 6499.528198] Switch charger CHECK_CONTROL
[ 6499.529937] TPS65200 regh 0x00=3
[ 6499.535034] set brightness = 49
[ 6499.551818] set brightness = 50
[ 6499.568206] set brightness = 51
[ 6499.584533] set brightness = 53
[ 6499.604003] msmfb: ready, waiting for full update
[ 6499.605163] set brightness = 54
[ 6499.610015] [CAM]ov8810_resume
[ 6499.610565] __capella_cm3602_power: Turn the capella_cm3602 power on
[ 6499.611480] [hdmi/fb]hdmifb_resume
[ 6499.611938] [hdmi/lcdc]lcdc_resume
[ 6499.612731] [hdmi/tx]hdmi_panel_init
[ 6499.613159] [hdmi]suc_hdmi_gpio_on
[ 6499.614318] [hdmi]hdmi_power(5)
[ 6499.614929] [R] late_resume end
[ 6499.617614] msmfb: pan_update in state(1)
[ 6499.617645] msmfb: full update starting
[ 6499.621398] set brightness = 55
[ 6499.636871] set brightness = 56
[ 6499.651428] Touch Status: 0x01
[ 6499.652282] msmfb: full update completed
[ 6499.653533] 0x10 0xEA 0xD8 0x09
[ 6499.655670] msmfb: turning on panel
[ 6499.656158] supersonic_panel_unblank
[ 6499.656921] turn on backlight
[ 6499.658020] set brightness = 57
[ 6499.658721] set brightness = 57
[ 6499.661132] Touch Status: 0x01 0x00 0xEA 0xD8 0x09
[ 6499.674163] set brightness = 59
[ 6499.690551] set brightness = 60
[ 6499.706848] set brightness = 61
[ 6499.723602] set brightness = 62
[ 6499.740081] set brightness = 63
[ 6499.756591] set brightness = 65
[ 6499.773071] set brightness = 66
[ 6499.788696] set brightness = 67
[ 6499.805145] set brightness = 68
[ 6499.821624] set brightness = 69
[ 6499.838531] set brightness = 71
[ 6499.854827] set brightness = 72
[ 6499.871643] set brightness = 73
[ 6499.887573] set brightness = 74
[ 6499.903625] set brightness = 75
[ 6499.919250] set brightness = 77
[ 6499.935791] set brightness = 78
[ 6499.953369] set brightness = 79
[ 6499.968383] set brightness = 80
[ 6499.983978] set brightness = 81
[ 6500.002685] set brightness = 82
[ 6500.018371] set brightness = 84
[ 6500.033935] set brightness = 85
[ 6500.050537] set brightness = 86
[ 6500.066101] set brightness = 87
[ 6500.082489] set brightness = 88
[ 6500.100067] set brightness = 89
[ 6500.287933] S1@102,652
[ 6500.468261] ALS value: 0x6, level: 1 #
[ 6500.548034] ALS value: 0x6, level: 1 #
[ 6500.650482] E1@458,992
[ 6500.752075] batt: M2A_RPC: set_charging: 1 at 6498004952870 (2012-02-13 22:49:03.763104202 UTC)
[ 6500.752136] TPS65200 Switch charger set control1
[ 6500.752136] Switch charger ON (SLOW)
[ 6500.761718] batt: M2A_RPC: cable_update: USB at 6498014901600 (2012-02-13 22:49:03.772778274 UTC)
[ 6500.762390] batt: htc_cable_status_update: 0 -> 1
[ 6500.762969] msm_hsusb_set_vbus_state: 1
[ 6500.763275] supersonic_uart_usb_switch:uart:0
[ 6500.763854] hsusb: OFFLINE -> ONLINE
[ 6500.764160] usb: lpm exit
[ 6500.765625] hsusb: reset controller
[ 6500.797363] msm_hsusb_phy_reset
[ 6500.987304] msm72k_udc: ulpi: write 0x0c to 0x31
[ 6500.987487] msm72k_udc: ulpi: write 0x30 to 0x32
[ 6500.987762] msm72k_udc: ulpi: write 0x1d to 0x0d
[ 6500.987945] msm72k_udc: ulpi: write 0x1d to 0x10
[ 6500.988128] usb: notify offline
[ 6500.988403] msm_hsusb: enable pullup
[ 6500.991577] msm72k_udc: usb: suspend
[ 6501.007476] usb: not AC charger
[ 6501.227142] msm72k_udc: usb: reset
[ 6501.227569] usb: send connect type 1
[ 6501.227722] batt:online=1
[ 6501.227874] batt: Update SMEM: cable type 1 at 6498481088107 (2012-02-13 22:49:04.238934263 UTC)
[ 6501.229431] msm72k_udc: usb: portchange USB_SPEED_HIGH
[ 6501.229919] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4069, batt_temp=318, batt_current=0, eval_current=0, level=90, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 6498490518038 (2012-02-13 22:49:04.240978941 UTC)
[ 6501.238189] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4069, batt_temp=318, batt_current=0, eval_current=0, level=90, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 6498498300020 (2012-02-13 22:49:04.249249204 UTC)
[ 6501.366241] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4069, batt_temp=318, batt_current=0, eval_current=0, level=90, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 6498619515842 (2012-02-13 22:49:04.377300963 UTC)
[ 6501.367034] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4069, batt_temp=318, batt_current=0, eval_current=0, level=90, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 6498620614475 (2012-02-13 22:49:04.378063902 UTC)
[ 6501.378265] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4069, batt_temp=318, batt_current=0, eval_current=0, level=90, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 6498636025852 (2012-02-13 22:49:04.389324890 UTC)
[ 6501.426452] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4069, batt_temp=318, batt_current=0, eval_current=0, level=90, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 6498679818575 (2012-02-13 22:49:04.437481626 UTC)
[ 6501.449096] msm72k_udc: usb: reset
[ 6501.451385] msm72k_udc: usb: portchange USB_SPEED_HIGH
[ 6501.718383] android_usb gadget: high speed config #1: android
[ 6502.407958] ALS value: 0x20, level: 3 #
[ 6504.413116] set brightness = 90
[ 6504.429626] set brightness = 91
[ 6504.446075] set brightness = 92
[ 6504.463470] set brightness = 94
[ 6504.478027] set brightness = 95
[ 6504.494323] set brightness = 96
[ 6504.509948] set brightness = 97
[ 6504.525848] set brightness = 99
[ 6504.542175] set brightness = 100
[ 6504.558410] set brightness = 101
[ 6504.575225] set brightness = 102
[ 6504.591552] set brightness = 104
[ 6504.609100] set brightness = 105
[ 6504.626434] set brightness = 106
[ 6504.642486] set brightness = 107
[ 6504.658172] set brightness = 109
[ 6504.674255] set brightness = 110
[ 6504.690338] set brightness = 111
[ 6504.708251] set brightness = 112
[ 6504.723876] set brightness = 114
[ 6504.740173] set brightness = 115
[ 6504.756225] set brightness = 116
[ 6504.772125] set brightness = 117
[ 6504.789123] set brightness = 119
[ 6504.805236] set brightness = 120
[ 6504.821533] set brightness = 121
[ 6504.837951] set brightness = 122
[ 6504.856536] set brightness = 124
[ 6504.874908] set brightness = 125
[ 6504.888397] set brightness = 126
[ 6504.905059] set brightness = 127
[ 6504.921844] set brightness = 129
[ 6504.938293] set brightness = 130
[ 6504.954406] set brightness = 131
[ 6504.970428] set brightness = 132
[ 6504.986846] set brightness = 134
[ 6505.005432] set brightness = 135
[ 6505.023834] set brightness = 136
[ 6505.037963] set brightness = 137
[ 6505.054046] set brightness = 139
[ 6505.070709] set brightness = 140
[ 6505.087890] set brightness = 141
[ 6505.103881] set brightness = 142
[ 6505.120208] set brightness = 144
[ 6505.136505] set brightness = 145
[ 6505.153289] set brightness = 146
[ 6505.169616] set brightness = 147
[ 6505.185913] set brightness = 149
[ 6505.202301] set brightness = 150
[ 6505.218109] set brightness = 151
[ 6505.234405] set brightness = 152
[ 6505.249694] set brightness = 154
[ 6505.266326] set brightness = 155
[ 6505.282653] set brightness = 156
[ 6505.298950] set brightness = 157
[ 6505.315246] set brightness = 159
[ 6505.331726] set brightness = 160
[ 6505.346893] set brightness = 161
[ 6505.363403] set brightness = 162
[ 6505.379028] set brightness = 164
[ 6507.443145] batt: M2A_RPC: set_charging: 1 at 6504696450655 (2012-02-13 22:49:10.454144223 UTC)
[ 6507.444427] TPS65200 Switch charger set control1
[ 6507.444885] Switch charger ON (SLOW)
[ 6510.921112] check_calibration: calibration confirm
[ 6511.297637] sequans_xxx: card switched to IDLE state
[ 6511.322296] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6512.317230] mmc1: Bus clock timer expired
[ 6512.317718] set GPIO40 as waketup source
[ 6512.318176] mmc1: Disable clocks
[ 6512.318969] mmc1: Enable clocks
[ 6512.319396] disable GPIO40 wakeup source
[ 6512.342437] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6513.337219] mmc1: Bus clock timer expired
[ 6513.337249] set GPIO40 as waketup source
[ 6513.337280] mmc1: Disable clocks
[ 6513.337310] mmc1: Enable clocks
[ 6513.337310] disable GPIO40 wakeup source
[ 6513.362396] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6514.357238] mmc1: Bus clock timer expired
[ 6514.357696] set GPIO40 as waketup source
[ 6514.358184] mmc1: Disable clocks
[ 6514.358978] mmc1: Enable clocks
[ 6514.359436] disable GPIO40 wakeup source
[ 6515.402252] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6516.397186] mmc1: Bus clock timer expired
[ 6516.397674] set GPIO40 as waketup source
[ 6516.398498] mmc1: Disable clocks
[ 6516.398956] mmc1: Enable clocks
[ 6516.399414] disable GPIO40 wakeup source
[ 6516.432464] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6517.427307] mmc1: Bus clock timer expired
[ 6517.427642] set GPIO40 as waketup source
[ 6517.428161] mmc1: Disable clocks
[ 6517.428497] mmc1: Enable clocks
[ 6517.428771] disable GPIO40 wakeup source
[ 6517.452850] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6518.447296] mmc1: Bus clock timer expired
[ 6518.447814] set GPIO40 as waketup source
[ 6518.448638] mmc1: Disable clocks
[ 6518.449157] mmc1: Enable clocks
[ 6518.449615] disable GPIO40 wakeup source
[ 6518.482543] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6519.141326] init: untracked pid 2249 exited
[ 6519.253753] sequans_xxx: waking up the card...
[ 6519.256378] sequans_xxx: wait for completion (timeout 800 msec)...
[ 6519.488159] sequans_xxx: card is waked up successfully
[ 6519.767669] sequans_xxx: WiMAX carrier LOST [ignored]
[ 6519.768310] sequans_xxx: WiMAX carrier LOST [ignored]
[ 6519.967498] sequans_xxx: card switched to REENTRY state
[ 6519.992492] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6520.359405] init: untracked pid 1271 exited
[ 6520.987243] mmc1: Bus clock timer expired
[ 6520.987701] set GPIO40 as waketup source
[ 6520.988525] mmc1: Disable clocks
[ 6520.988983] mmc1: Enable clocks
[ 6520.989410] disable GPIO40 wakeup source
[ 6521.022430] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[ 6521.292785] sequans_xxx: free GPIO40 interrupt
[ 6521.300445] sequans_xxx: KTHP cleaned up
[ 6521.301330] sequans_xxx: wait until RX is finished
[ 6522.327514] sequans_xxx: wait until TX is finished
[ 6522.328613] sequans_xxx: card removed successfuly
[ 6522.330841] sequans_xxx: Driver has been removed
[ 6522.331329] mmc_wimax_set_carddetect: 0
[ 6522.332122] mmc1: card_present 0
[ 6522.332550] supersonic_wimax_status
[ 6522.333007] mmc1: Slot status change detected (1 -> 0)
[ 6522.333862] mmc_wimax_power
[ 6522.354370] mmc_wimax_set_status on:0
[ 6522.827697] mmc1: card 0001 removed
[ 6523.987243] mmc1: Bus clock timer expired
[ 6523.987731] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
[ 6523.988555] mmc1: Disable clocks
[ 6534.056579] wds: 0020 @ 01
[ 6534.057037] qmi: wds: network start failed (000e)
[ 6551.064300] wds: 0020 @ 01
[ 6551.064788] qmi: wds: got handle 0x01c90550
[ 6551.065307] wds: 0022 @ ff
[ 6551.065734] qmi: wds: CONNECTED
[ 6551.067382] wds: 002d @ 01
[ 6551.067840] qmi: got network profile
[ 6551.070434] rmnet_open()
[ 6561.157257] rmnet0: no IPv6 routers present
[ 6572.121643] set brightness = 156
[ 6572.137969] set brightness = 148
[ 6572.154388] set brightness = 141
[ 6572.170013] set brightness = 133
[ 6572.186309] set brightness = 126
[ 6572.202636] set brightness = 118
[ 6572.218902] set brightness = 110
[ 6572.235504] set brightness = 103
[ 6572.251831] set brightness = 95
[ 6572.268341] set brightness = 88
[ 6572.283935] set brightness = 80
[ 6572.300415] set brightness = 73
[ 6572.315734] set brightness = 65
[ 6572.332031] set brightness = 57
[ 6572.348663] set brightness = 50
[ 6572.364929] set brightness = 42
[ 6572.381225] set brightness = 35
[ 6572.397766] set brightness = 27
[ 6572.414520] set brightness = 20
[ 6593.791076] msm_pm_wait_state(2, 0, 0, 0) failed 11001
[ 6593.791076] msm_sleep(): msm_pm_wait_state failed, 11001
[ 6747.434875] batt: M2A_RPC: level_update: 91 at 6744687905716 (2012-02-13 22:53:10.445904460 UTC)
[ 6747.435333] batt: batt:power_supply_changed: battery at 6744688363480 (2012-02-13 22:53:10.446392741 UTC)
[ 6747.437316] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4143, batt_temp=324, batt_current=284, eval_current=0, level=91, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 6744690621781 (2012-02-13 22:53:10.448376385 UTC)
[ 6747.438140] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4143, batt_temp=324, batt_current=284, eval_current=0, level=91, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 6744702340532 (2012-02-13 22:53:10.449169842 UTC)
[ 6891.917388] set brightness = 29
[ 6891.933380] set brightness = 39
[ 6891.952362] set brightness = 48
[ 6891.978912] set brightness = 58
[ 6891.994812] set brightness = 68
[ 6892.011718] set brightness = 77
[ 6892.028472] set brightness = 87
[ 6892.043823] set brightness = 96
[ 6892.060546] set brightness = 106
[ 6892.077362] set brightness = 115
[ 6892.093200] set brightness = 125
[ 6892.112457] set brightness = 135
[ 6892.129608] set brightness = 144
[ 6892.146453] set brightness = 154
[ 6892.163146] set brightness = 164
[ 6893.126098] mmc2: Starting deferred resume
[ 6893.132080] supersonic_sdslot_switchvdd: Setting level to 2850 (Success)
[ 6893.692718] mmc2: Deferred resume completed
[ 6895.437103] pcm_out: open
[ 6895.437561] acdb: 864 bytes for device 607, rate 48000.
[ 6895.579406] Audio: supersonic_speaker_enable 1
[ 6895.590454] tpa2018d1_set_speaker_amp: ON, value = 1 c2
[ 6901.780120] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
[ 6901.992279] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
[ 6902.314483] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
[ 6902.491821] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
[ 6938.755065] wds: 0021 @ 01
[ 6938.755096] qmi: wds: network stopped
[ 6938.755615] rmnet_stop()
[ 6938.759460] wds: 0022 @ ff
[ 6938.759490] qmi: wds: DISCONNECTED
[ 6957.816375] set brightness = 156
[ 6957.832702] set brightness = 148
[ 6957.849395] set brightness = 141
[ 6957.865356] set brightness = 133
[ 6957.881195] set brightness = 126
[ 6957.897399] set brightness = 118
[ 6957.913543] set brightness = 110
[ 6957.929718] set brightness = 103
[ 6957.948577] set brightness = 95
[ 6957.964111] set brightness = 88
[ 6957.983642] set brightness = 80
[ 6957.997833] set brightness = 73
[ 6958.015350] set brightness = 65
[ 6958.033416] set brightness = 57
[ 6958.049530] set brightness = 50
[ 6958.065917] set brightness = 42
[ 6958.081939] set brightness = 35
[ 6958.098175] set brightness = 27
[ 6958.114196] set brightness = 20
[ 6979.845916] wds: 0020 @ 01
[ 6979.845947] qmi: wds: network start failed (000e)
[ 7017.432128] batt: M2A_RPC: level_update: 92 at 7014685647433 (2012-02-13 22:57:40.443157895 UTC)
[ 7017.436614] batt: batt:power_supply_changed: battery
[ 7017.441223] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4136, batt_temp=330, batt_current=200, eval_current=0, level=92, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 7014695779269 (2012-02-13 22:57:40.452221617 UTC)
[ 7017.443634] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4136, batt_temp=330, batt_current=200, eval_current=0, level=92, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 7014697793429 (2012-02-13 22:57:40.454663023 UTC)
[ 7017.451477]  at 7014704293674 (2012-02-13 22:57:40.447674497 UTC)
[ 7077.432281] batt: M2A_RPC: set_charging: 100 at 7074685616916 (2012-02-13 22:58:40.443310484 UTC)
[ 7077.434204] TPS65200 Switch charger set control100
[ 7077.434234] Switch charger CHECK
[ 7077.435699] TPS65200 STATUS_A27, INT2:0
[ 7317.432891] batt: M2A_RPC: level_update: 93 at 7314686532444 (2012-02-13 23:02:40.443920836 UTC)
[ 7317.434204] batt: batt:power_supply_changed: battery at 7314687844699 (2012-02-13 23:02:40.445263609 UTC)
[ 7317.440460] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4150, batt_temp=337, batt_current=188, eval_current=0, level=93, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 7314694650119 (2012-02-13 23:02:40.451458677 UTC)
[ 7317.442596] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4150, batt_temp=337, batt_current=188, eval_current=0, level=93, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 7314716012422 (2012-02-13 23:02:40.453625425 UTC)
[ 7431.349761] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 7431.357849] set brightness = 29
[ 7431.374237] set brightness = 39
[ 7431.389892] set brightness = 48
[ 7431.406402] set brightness = 58
[ 7431.422424] set brightness = 68
[ 7431.439147] set brightness = 77
[ 7431.454925] set brightness = 87
[ 7431.471191] set brightness = 96
[ 7431.487487] set brightness = 106
[ 7431.503356] set brightness = 115
[ 7431.519073] set brightness = 125
[ 7431.535156] set brightness = 135
[ 7431.553588] set brightness = 144
[ 7431.571472] set brightness = 154
[ 7431.572509] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 7431.588775] set brightness = 164
[ 7432.315673] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 7432.555023] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 7487.869628] set brightness = 156
[ 7487.884246] set brightness = 148
[ 7487.901885] set brightness = 141
[ 7487.919372] set brightness = 133
[ 7487.934967] set brightness = 126
[ 7487.951660] set brightness = 118
[ 7487.968200] set brightness = 110
[ 7487.984130] set brightness = 103
[ 7487.999938] set brightness = 95
[ 7488.016662] set brightness = 88
[ 7488.033294] set brightness = 80
[ 7488.049011] set brightness = 73
[ 7488.065338] set brightness = 65
[ 7488.081420] set brightness = 57
[ 7488.097778] set brightness = 50
[ 7488.113830] set brightness = 42
[ 7488.131011] set brightness = 35
[ 7488.149078] set brightness = 27
[ 7488.166961] set brightness = 20
[ 7643.066131] wds: 0020 @ 01
[ 7643.066162] qmi: wds: network start failed (000e)
[ 7677.435272] batt: M2A_RPC: level_update: 94 at 7674688638154 (2012-02-13 23:08:40.446301205 UTC)
[ 7677.436645] batt: batt:power_supply_changed: battery at 7674695870821 (2012-02-13 23:08:40.447705014 UTC)
[ 7677.444152] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4143, batt_temp=343, batt_current=128, eval_current=0, level=94, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0
[ 7677.447143] batt: M2A_RPC: set_charging: 100 at 7674700234835 (2012-02-13 23:08:40.458172543 UTC)
[ 7677.447448] TPS65200 Switch charger set control100
[ 7677.447479] Switch charger CHECK
[ 7677.447601]  at 7674700417941 (2012-02-13 23:08:40.455181821 UTC)
[ 7677.448059] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4143, batt_temp=343, batt_current=128, eval_current=0, level=94, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 7674701028292 (2012-02-13 23:08:40.459088071 UTC)
[ 7677.475250] msmfb_start_dma 24.261 ms after vsync request
[ 7677.480651] TPS65200 STATUS_A27, INT2:0
[ 7691.236022] wds: 0020 @ 01
[ 7691.236053] qmi: wds: network start failed (000e)
[ 7709.785430] wds: 0020 @ 01
[ 7709.785461] qmi: wds: got handle 0x01c90550
[ 7709.785491] wds: 0022 @ ff
[ 7709.785522] qmi: wds: CONNECTED
[ 7709.789642] wds: 002d @ 01
[ 7709.789947] qmi: got network profile
[ 7709.791198] rmnet_open()
[ 7720.387268] rmnet0: no IPv6 routers present
[ 7759.139923] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 7759.148193] set brightness = 29
[ 7759.163818] set brightness = 39
[ 7759.180480] set brightness = 48
[ 7759.201416] set brightness = 58
[ 7759.216949] set brightness = 68
[ 7759.233184] set brightness = 77
[ 7759.249328] set brightness = 87
[ 7759.265350] set brightness = 96
[ 7759.282806] set brightness = 106
[ 7759.298797] set brightness = 115
[ 7759.315307] set brightness = 125
[ 7759.331420] set brightness = 135
[ 7759.347930] set brightness = 144
[ 7759.364776] set brightness = 154
[ 7759.375518] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 7759.382049] set brightness = 164
[ 7759.570281] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 7759.773956] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 7760.502014] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 7760.754974] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 7783.163879] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
[ 7783.404815] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
[ 7785.425354] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
[ 7785.661834] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
[ 7840.968566] set brightness = 156
[ 7840.985198] set brightness = 148
[ 7841.001342] set brightness = 141
[ 7841.017211] set brightness = 133
[ 7841.033264] set brightness = 126
[ 7841.049133] set brightness = 118
[ 7841.064880] set brightness = 110
[ 7841.081817] set brightness = 103
[ 7841.097839] set brightness = 95
[ 7841.114013] set brightness = 88
[ 7841.130310] set brightness = 80
[ 7841.146179] set brightness = 73
[ 7841.162017] set brightness = 65
[ 7841.178009] set brightness = 57
[ 7841.193817] set brightness = 50
[ 7841.210357] set brightness = 42
[ 7841.225952] set brightness = 35
[ 7841.243957] set brightness = 27
[ 7841.260498] set brightness = 20
[ 7914.736572] Audio: supersonic_speaker_enable 0
[ 7914.744506] tpa2018d1_set_speaker_amp: OFF
[ 7914.755126] pcm_out: release
[ 8004.595611] wds: 0021 @ 01
[ 8004.595642] qmi: wds: network stopped
[ 8004.596008] rmnet_stop()
[ 8004.598175] wds: 0022 @ ff
[ 8004.598205] qmi: wds: DISCONNECTED
[ 8024.109252] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
[ 8024.119140] set brightness = 29
[ 8024.134857] set brightness = 39
[ 8024.152923] set brightness = 48
[ 8024.171020] set brightness = 58
[ 8024.189788] set brightness = 68
[ 8024.205322] set brightness = 77
[ 8024.221588] set brightness = 87
[ 8024.238159] set brightness = 96
[ 8024.254913] set brightness = 106
[ 8024.270782] set brightness = 115
[ 8024.287078] set brightness = 125
[ 8024.288696] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
[ 8024.303985] set brightness = 135
[ 8024.319854] set brightness = 144
[ 8024.336090] set brightness = 154
[ 8024.353118] set brightness = 164
[ 8024.569305] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
[ 8024.730773] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
[ 8105.453765] pcm_out: open
[ 8105.454437] acdb: 864 bytes for device 607, rate 48000.
[ 8105.595886] Audio: supersonic_speaker_enable 1
[ 8105.605895] tpa2018d1_set_speaker_amp: ON, value = 1 c2
[ 8157.432006] batt: M2A_RPC: level_update: 95 at 8154684757581 (2012-02-13 23:16:40.748949502 UTC)
[ 8157.433044] batt: batt:power_supply_changed: battery at 8154686100354 (2012-02-13 23:16:40.750017617 UTC)
[ 8157.437683] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4159, batt_temp=354, batt_current=202, eval_current=0, level=95, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 8154692142834 (2012-02-13 23:16:40.754595254 UTC)
[ 8157.440765] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4159, batt_temp=354, batt_current=202, eval_current=0, level=95, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 8154698734630 (2012-02-13 23:16:40.757677529 UTC)
[ 8174.040679] set brightness = 156
[ 8174.056823] set brightness = 148
[ 8174.075012] set brightness = 141
[ 8174.090484] set brightness = 133
[ 8174.107208] set brightness = 126
[ 8174.123901] set brightness = 118
[ 8174.140258] set brightness = 110
[ 8174.157714] set brightness = 103
[ 8174.173614] set brightness = 95
[ 8174.190032] set brightness = 88
[ 8174.205383] set brightness = 80
[ 8174.221740] set brightness = 73
[ 8174.237579] set brightness = 65
[ 8174.254089] set brightness = 57
[ 8174.277374] set brightness = 50
[ 8174.314727] set brightness = 42
[ 8174.330902] set brightness = 35
[ 8174.351104] set brightness = 27
[ 8174.375061] set brightness = 20
[ 8210.216094] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 8210.222625] set brightness = 29
[ 8210.239074] set brightness = 39
[ 8210.255371] set brightness = 48
[ 8210.272033] set brightness = 58
[ 8210.288482] set brightness = 68
[ 8210.304229] set brightness = 77
[ 8210.321075] set brightness = 87
[ 8210.338348] set brightness = 96
[ 8210.354492] set brightness = 106
[ 8210.371734] set brightness = 115
[ 8210.387451] set brightness = 125
[ 8210.404205] set brightness = 135
[ 8210.421020] set brightness = 144
[ 8210.438323] set brightness = 154
[ 8210.445648] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 8210.457489] set brightness = 164
[ 8223.018768] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 8223.222808] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 8223.754272] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 8223.905822] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 8235.493927] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
[ 8235.739990] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
[ 8241.190399] wds: 0020 @ 01
[ 8241.190856] qmi: wds: network start failed (000e)
[ 8260.389221] wds: 0020 @ 01
[ 8260.390075] qmi: wds: got handle 0x01c90550
[ 8260.390563] wds: 0022 @ ff
[ 8260.390991] qmi: wds: CONNECTED
[ 8260.392852] wds: 002d @ 01
[ 8260.393402] qmi: got network profile
[ 8260.399169] rmnet_open()
[ 8271.397857] rmnet0: no IPv6 routers present
[ 8273.874725] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
[ 8274.086608] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
[ 8274.910400] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 8275.118041] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 8275.887634] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
[ 8276.080352] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
[ 8277.435791] batt: M2A_RPC: set_charging: 100 at 8274688511241 (2012-02-13 23:18:40.752733680 UTC)
[ 8277.437103] TPS65200 Switch charger set control100
[ 8277.437561] Switch charger CHECK
[ 8277.439575] TPS65200 STATUS_A27, INT2:0
[ 8366.083007] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 8366.323272] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 8421.611755] set brightness = 156
[ 8421.627502] set brightness = 148
[ 8421.643249] set brightness = 141
[ 8421.659790] set brightness = 133
[ 8421.675445] set brightness = 126
[ 8421.692016] set brightness = 118
[ 8421.709289] set brightness = 110
[ 8421.725524] set brightness = 103
[ 8421.741851] set brightness = 95
[ 8421.758331] set brightness = 88
[ 8421.773620] set brightness = 80
[ 8421.789520] set brightness = 73
[ 8421.806396] set brightness = 65
[ 8421.824432] set brightness = 57
[ 8421.839508] set brightness = 50
[ 8421.856048] set brightness = 42
[ 8421.871826] set brightness = 35
[ 8421.887512] set brightness = 27
[ 8421.903778] set brightness = 20
[ 8512.560058] wds: 0021 @ 01
[ 8512.560089] qmi: wds: network stopped
[ 8512.560150] wds: 0022 @ ff
[ 8512.560150] qmi: wds: DISCONNECTED
[ 8512.573333] rmnet_stop()
[ 8577.432006] batt: M2A_RPC: level_update: 96 at 8574684269300 (2012-02-13 23:23:40.748918985 UTC)
[ 8577.432128] batt: batt:power_supply_changed: battery at 8574684391370 (2012-02-13 23:23:40.749071573 UTC)
[ 8577.449218] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4153, batt_temp=365, batt_current=194, eval_current=0, level=96, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 8574701542248 (2012-02-13 23:23:40.766130898 UTC)
[ 8577.449584] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4153, batt_temp=365, batt_current=194, eval_current=0, level=96, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 8574701877941 (2012-02-13 23:23:40.766497109 UTC)
[ 8668.106536] wds: 0020 @ 01
[ 8668.107025] qmi: wds: got handle 0x01c90550
[ 8668.107482] wds: 0022 @ ff
[ 8668.109344] qmi: wds: CONNECTED
[ 8668.110656] wds: 002d @ 01
[ 8668.111114] qmi: got network profile
[ 8668.112823] rmnet_open()
[ 8679.007812] rmnet0: no IPv6 routers present
[ 8739.906555] wds: 0021 @ 01
[ 8739.906707] qmi: wds: network stopped
[ 8739.907012] wds: 0022 @ ff
[ 8739.907165] qmi: wds: DISCONNECTED
[ 8739.907562] rmnet_stop()
[ 8856.633300] set brightness = 29
[ 8856.649291] set brightness = 39
[ 8856.666442] set brightness = 48
[ 8856.682281] set brightness = 58
[ 8856.699005] set brightness = 68
[ 8856.714996] set brightness = 77
[ 8856.730529] set brightness = 87
[ 8856.746398] set brightness = 96
[ 8856.762542] set brightness = 106
[ 8856.778533] set brightness = 115
[ 8856.795135] set brightness = 125
[ 8856.811859] set brightness = 135
[ 8856.827758] set brightness = 144
[ 8856.843719] set brightness = 154
[ 8856.859527] set brightness = 164
[ 8877.432067] batt: M2A_RPC: set_charging: 100 at 8874684788098 (2012-02-13 23:28:40.749010537 UTC)
[ 8877.433074] TPS65200 Switch charger set control100
[ 8877.433898] Switch charger CHECK
[ 8877.436767] TPS65200 STATUS_A27, INT2:0
[ 8909.793975] set brightness = 156
[ 8909.810455] set brightness = 148
[ 8909.826904] set brightness = 141
[ 8909.842468] set brightness = 133
[ 8909.859130] set brightness = 126
[ 8909.876037] set brightness = 118
[ 8909.892089] set brightness = 110
[ 8909.910919] set brightness = 103
[ 8909.927337] set brightness = 95
[ 8909.943511] set brightness = 88
[ 8909.960327] set brightness = 80
[ 8909.977111] set brightness = 73
[ 8909.993865] set brightness = 65
[ 8910.009765] set brightness = 57
[ 8910.025543] set brightness = 50
[ 8910.042938] set brightness = 42
[ 8910.059051] set brightness = 35
[ 8910.075195] set brightness = 27
[ 8910.092163] set brightness = 20
[ 8997.432067] batt: M2A_RPC: level_update: 97 at 8994684330335 (2012-02-13 23:30:40.749010538 UTC)
[ 8997.432159] batt: batt:power_supply_changed: battery at 8994684421887 (2012-02-13 23:30:40.749132608 UTC)
[ 8997.441955] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4154, batt_temp=373, batt_current=182, eval_current=0, level=97, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 8994695591321 (2012-02-13 23:30:40.758867716 UTC)
[ 8997.444091] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4154, batt_temp=373, batt_current=182, eval_current=0, level=97, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 8994720432628 (2012-02-13 23:30:40.761034464 UTC)
[ 9152.168914] wds: 0020 @ 01
[ 9152.169372] qmi: wds: network start failed (000e)
[ 9178.253570] wds: 0020 @ 01
[ 9178.253631] qmi: wds: got handle 0x01c90550
[ 9178.255126] wds: 0022 @ ff
[ 9178.255157] qmi: wds: CONNECTED
[ 9178.256164] wds: 002d @ 01
[ 9178.256195] qmi: got network profile
[ 9178.267578] rmnet_open()
[ 9188.467834] rmnet0: no IPv6 routers present
[ 9236.895629] wds: 0021 @ 01
[ 9236.895812] qmi: wds: network stopped
[ 9236.896179] wds: 0022 @ ff
[ 9236.896362] qmi: wds: DISCONNECTED
[ 9236.896789] rmnet_stop()
[ 9350.485412] wds: 0020 @ 01
[ 9350.486328] qmi: wds: network start failed (000e)
[ 9368.498992] wds: 0020 @ 01
[ 9368.499145] qmi: wds: got handle 0x01c90550
[ 9368.499481] wds: 0022 @ ff
[ 9368.499633] qmi: wds: CONNECTED
[ 9368.500793] wds: 002d @ 01
[ 9368.500946] qmi: got network profile
[ 9368.501953] rmnet_open()
[ 9369.276245] wds: 0021 @ 01
[ 9369.276428] qmi: wds: network stopped
[ 9369.276977] wds: 0022 @ ff
[ 9369.277130] qmi: wds: DISCONNECTED
[ 9369.277465] rmnet_stop()
[ 9477.431762] batt: M2A_RPC: level_update: 98 at 9474684299817 (2012-02-13 23:38:40.748735880 UTC)
[ 9477.432342] batt: batt:power_supply_changed: battery at 9474684757581 (2012-02-13 23:38:40.749315714 UTC)
[ 9477.434967] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4149, batt_temp=373, batt_current=80, eval_current=0, level=98, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 9474687626233 (2012-02-13 23:38:40.751909708 UTC)
[ 9477.435729] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4149, batt_temp=373, batt_current=80, eval_current=0, level=98, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0
[ 9477.445953] batt: M2A_RPC: set_charging: 100 at 9474702671399 (2012-02-13 23:38:40.762896035 UTC)
[ 9477.454071] TPS65200 Switch charger set control100
[ 9477.467864]  at 9474720066418 (2012-02-13 23:38:40.752703165 UTC)
[ 9477.482116] Switch charger CHECK
[ 9477.486755] TPS65200 STATUS_A27, INT2:0
[ 9507.451263] batt: M2A_RPC: level_update: 99 at 9504703678479 (2012-02-13 23:39:10.768206094 UTC)
[ 9507.451721] batt: batt:power_supply_changed: battery at 9504704136243 (2012-02-13 23:39:10.768694375 UTC)
[ 9507.453399] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4144, batt_temp=373, batt_current=8, eval_current=0, level=99, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 9504706150403 (2012-02-13 23:39:10.770372842 UTC)
[ 9507.454162] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4144, batt_temp=373, batt_current=8, eval_current=0, level=99, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 9504728397718 (2012-02-13 23:39:10.771135781 UTC)
[ 9663.551879] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 9663.556884] set brightness = 29
[ 9663.572631] set brightness = 39
[ 9663.588775] set brightness = 48
[ 9663.604522] set brightness = 58
[ 9663.621917] set brightness = 68
[ 9663.637298] set brightness = 77
[ 9663.654266] set brightness = 87
[ 9663.671661] set brightness = 96
[ 9663.690673] set brightness = 106
[ 9663.706451] set brightness = 115
[ 9663.722625] set brightness = 125
[ 9663.738708] set brightness = 135
[ 9663.754913] set brightness = 144
[ 9663.770782] set brightness = 154
[ 9663.779296] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 9663.786865] set brightness = 164
[ 9664.153656] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 9664.318359] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 9719.669189] set brightness = 156
[ 9719.684600] set brightness = 148
[ 9719.700897] set brightness = 141
[ 9719.716674] set brightness = 133
[ 9719.733062] set brightness = 126
[ 9719.748992] set brightness = 118
[ 9719.764709] set brightness = 110
[ 9719.780578] set brightness = 103
[ 9719.796875] set brightness = 95
[ 9719.812622] set brightness = 88
[ 9719.828735] set brightness = 80
[ 9719.844696] set brightness = 73
[ 9719.860443] set brightness = 65
[ 9719.877197] set brightness = 57
[ 9719.894226] set brightness = 50
[ 9719.911102] set brightness = 42
[ 9719.927337] set brightness = 35
[ 9719.944885] set brightness = 27
[ 9719.961334] set brightness = 20
[ 9763.561401] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 9763.570220] set brightness = 29
[ 9763.588195] set brightness = 39
[ 9763.603668] set brightness = 48
[ 9763.619873] set brightness = 58
[ 9763.635253] set brightness = 68
[ 9763.652160] set brightness = 77
[ 9763.668914] set brightness = 87
[ 9763.684722] set brightness = 96
[ 9763.700592] set brightness = 106
[ 9763.717407] set brightness = 115
[ 9763.734283] set brightness = 125
[ 9763.750396] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 9763.752258] set brightness = 135
[ 9763.766967] set brightness = 144
[ 9763.782897] set brightness = 154
[ 9763.800781] set brightness = 164
[ 9776.395080] wds: 0020 @ 01
[ 9776.395111] qmi: wds: got handle 0x01c90550
[ 9776.395690] wds: 0022 @ ff
[ 9776.395721] qmi: wds: CONNECTED
[ 9776.396545] wds: 002d @ 01
[ 9776.396575] qmi: got network profile
[ 9776.399627] rmnet_open()
[ 9786.497863] rmnet0: no IPv6 routers present
[ 9819.109222] set brightness = 156
[ 9819.125305] set brightness = 148
[ 9819.145050] set brightness = 141
[ 9819.163909] set brightness = 133
[ 9819.181121] set brightness = 126
[ 9819.198669] set brightness = 118
[ 9819.216217] set brightness = 110
[ 9819.234985] set brightness = 103
[ 9819.251190] set brightness = 95
[ 9819.267944] set brightness = 88
[ 9819.283966] set brightness = 80
[ 9819.299926] set brightness = 73
[ 9819.315795] set brightness = 65
[ 9819.332031] set brightness = 57
[ 9819.348358] set brightness = 50
[ 9819.365692] set brightness = 42
[ 9819.382354] set brightness = 35
[ 9819.399291] set brightness = 27
[ 9819.416107] set brightness = 20
[ 9901.094055] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
[ 9901.099548] set brightness = 29
[ 9901.115997] set brightness = 39
[ 9901.132354] set brightness = 48
[ 9901.150421] set brightness = 58
[ 9901.166320] set brightness = 68
[ 9901.182830] set brightness = 77
[ 9901.198883] set brightness = 87
[ 9901.214752] set brightness = 96
[ 9901.233398] set brightness = 106
[ 9901.250579] set brightness = 115
[ 9901.267150] set brightness = 125
[ 9901.273376] gpio_keys_scan_keys: key 1-73, 1 (41) continue debounce
[ 9901.282897] set brightness = 135
[ 9901.293487] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
[ 9901.299591] set brightness = 144
[ 9901.315948] set brightness = 154
[ 9901.332855] set brightness = 164
[ 9902.289520] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
[ 9902.482238] gpio_keys_scan_keys: key 1-73, 1 (41) continue debounce
[ 9902.502838] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
[ 9903.188964] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 1
[ 9903.367675] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
[ 9958.681884] set brightness = 156
[ 9958.698059] set brightness = 148
[ 9958.715515] set brightness = 141
[ 9958.734100] set brightness = 133
[ 9958.749572] set brightness = 126
[ 9958.766052] set brightness = 118
[ 9958.782104] set brightness = 110
[ 9958.799346] set brightness = 103
[ 9958.816345] set brightness = 95
[ 9958.833740] set brightness = 88
[ 9958.849578] set brightness = 80
[ 9958.866333] set brightness = 73
[ 9958.883239] set brightness = 65
[ 9958.899719] set brightness = 57
[ 9958.916809] set brightness = 50
[ 9958.932769] set brightness = 42
[ 9958.948760] set brightness = 35
[ 9958.965148] set brightness = 27
[ 9958.981719] set brightness = 20
[ 9987.432037] batt: M2A_RPC: level_update: 100 at 9984684299816 (2012-02-13 23:47:10.748980018 UTC)
[ 9987.432159] batt: batt:power_supply_changed: battery at 9984684421886 (2012-02-13 23:47:10.749132606 UTC)
[ 9987.444335] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4167, batt_temp=369, batt_current=180, eval_current=0, level=100, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 9984697574962 (2012-02-13 23:47:10.761248085 UTC)
[ 9987.446380] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4167, batt_temp=369, batt_current=180, eval_current=0, level=100, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 9984710178723 (2012-02-13 23:47:10.763323280 UTC)
[10047.438629] batt: M2A_RPC: set_charging: 0 at 10044692325938 (2012-02-13 23:48:10.755541297 UTC)
[10047.440155] TPS65200 Switch charger set control0
[10047.440185] Switch charger OFF
[10047.442016] batt: M2A_RPC: level_update: 100 at 10044694340098 (2012-02-13 23:48:10.758959265 UTC)
[10047.442169] batt: batt:power_supply_changed: battery at 10044694462168 (2012-02-13 23:48:10.759142371 UTC)
[10047.446868] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4169, batt_temp=365, batt_current=106, eval_current=0, level=100, charging_source=1, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10044699192392 (2012-02-13 23:48:10.763811560 UTC)
[10047.447235] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4169, batt_temp=365, batt_current=106, eval_current=0, level=100, charging_source=1, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10044699558603 (2012-02-13 23:48:10.764177771 UTC)
[10047.480957] msmfb_start_dma 32.257 ms after vsync request
[10107.438079] batt: M2A_RPC: set_charging: 1 at 10104691105235 (2012-02-13 23:49:10.755022499 UTC)
[10107.439361] TPS65200 Switch charger set control1
[10107.440551] Switch charger ON (SLOW)
[10197.432281] batt: M2A_RPC: set_charging: 0 at 10194684849133 (2012-02-13 23:50:40.749224160 UTC)
[10197.433197] TPS65200 Switch charger set control0
[10197.433532] Switch charger OFF
[10197.436248] batt: M2A_RPC: level_update: 100 at 10194688480724 (2012-02-13 23:50:40.753191445 UTC)
[10197.436309] batt: batt:power_supply_changed: battery at 10194688572277 (2012-02-13 23:50:40.753282997 UTC)
[10197.439727] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4173, batt_temp=365, batt_current=188, eval_current=0, level=100, charging_source=1, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10194692020763 (2012-02-13 23:50:40.756670448 UTC)
[10197.439971] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4173, batt_temp=365, batt_current=188, eval_current=0, level=100, charging_source=1, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10194692234386 (2012-02-13 23:50:40.756914589 UTC)
[10197.468292] msmfb_start_dma 21.881 ms after vsync request
[10227.431884] batt: M2A_RPC: set_charging: 1 at 10224684116712 (2012-02-13 23:51:10.748857950 UTC)
[10227.431915] TPS65200 Switch charger set control1
[10227.431915] Switch charger ON (SLOW)
[10317.431823] batt: M2A_RPC: set_charging: 0 at 10314684238781 (2012-02-13 23:52:40.748766396 UTC)
[10317.432281] TPS65200 Switch charger set control0
[10317.432464] Switch charger OFF
[10317.434509] batt: M2A_RPC: level_update: 100 at 10314687046398 (2012-02-13 23:52:40.751451943 UTC)
[10317.434997] batt: batt:power_supply_changed: battery at 10314687504162 (2012-02-13 23:52:40.751970742 UTC)
[10317.436767] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4175, batt_temp=361, batt_current=200, eval_current=0, level=100, charging_source=1, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10314692631116 (2012-02-13 23:52:40.753710244 UTC)
[10317.444854] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4175, batt_temp=361, batt_current=200, eval_current=0, level=100, charging_source=1, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10314744358411 (2012-02-13 23:52:40.761827920 UTC)
[10347.431915] batt: M2A_RPC: set_charging: 1 at 10344684360851 (2012-02-13 23:53:10.748888466 UTC)
[10347.432403] TPS65200 Switch charger set control1
[10347.432586] Switch charger ON (SLOW)
[10437.435516] batt: M2A_RPC: set_charging: 0 at 10434687778820 (2012-02-13 23:54:40.752459022 UTC)
[10437.435607] TPS65200 Switch charger set control0
[10437.435638] Switch charger OFF
[10437.437469] batt: M2A_RPC: level_update: 100 at 10434689731944 (2012-02-13 23:54:40.754381630 UTC)
[10437.437561] batt: batt:power_supply_changed: battery at 10434689823497 (2012-02-13 23:54:40.754534218 UTC)
[10437.441375] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4165, batt_temp=361, batt_current=98, eval_current=0, level=100, charging_source=1, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10434693668712 (2012-02-13 23:54:40.758287880 UTC)
[10437.441711] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4165, batt_temp=361, batt_current=98, eval_current=0, level=100, charging_source=1, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10434694034923 (2012-02-13 23:54:40.758654090 UTC)
[10437.481903] msmfb_start_dma 36.315 ms after vsync request
[10467.435424] batt: M2A_RPC: set_charging: 1 at 10464688206066 (2012-02-13 23:55:10.752336952 UTC)
[10467.437011] TPS65200 Switch charger set control1
[10467.437500] Switch charger ON (SLOW)
[10557.432159] batt: M2A_RPC: set_charging: 0 at 10554684421886 (2012-02-13 23:56:40.749102088 UTC)
[10557.432250] TPS65200 Switch charger set control0
[10557.432281] Switch charger OFF
[10557.434112] batt: M2A_RPC: level_update: 100 at 10554686375010 (2012-02-13 23:56:40.751055213 UTC)
[10557.434204] batt: batt:power_supply_changed: battery at 10554686466563 (2012-02-13 23:56:40.751177284 UTC)
[10557.441436] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4168, batt_temp=357, batt_current=176, eval_current=0, level=100, charging_source=1, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10554693729747 (2012-02-13 23:56:40.758348915 UTC)
[10557.441772] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4168, batt_temp=357, batt_current=176, eval_current=0, level=100, charging_source=1, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10554694095958 (2012-02-13 23:56:40.758715126 UTC)
[10587.432556] batt: M2A_RPC: set_charging: 1 at 10584684818615 (2012-02-13 23:57:10.749498818 UTC)
[10587.432647] TPS65200 Switch charger set control1
[10587.432678] Switch charger ON (SLOW)
[10677.432556] batt: M2A_RPC: set_charging: 0 at 10674686588634 (2012-02-13 23:58:40.749498817 UTC)
[10677.434448] TPS65200 Switch charger set control0
[10677.434478] Switch charger OFF
[10677.436462] batt: M2A_RPC: level_update: 100 at 10674688724864 (2012-02-13 23:58:40.753344032 UTC)
[10677.436584] batt: batt:power_supply_changed: battery at 10674688846934 (2012-02-13 23:58:40.753527137 UTC)
[10677.441619] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4176, batt_temp=357, batt_current=178, eval_current=0, level=100, charging_source=1, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10674693912853 (2012-02-13 23:58:40.758532021 UTC)
[10677.441955] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4176, batt_temp=357, batt_current=178, eval_current=0, level=100, charging_source=1, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10674694279064 (2012-02-13 23:58:40.758898232 UTC)
[10677.477203] msmfb_start_dma 32.562 ms after vsync request
[10701.672241] set brightness = 29
[10701.688903] set brightness = 39
[10701.705261] set brightness = 48
[10701.721771] set brightness = 58
[10701.737609] set brightness = 68
[10701.753265] set brightness = 77
[10701.769927] set brightness = 87
[10701.785644] set brightness = 96
[10701.801513] set brightness = 106
[10701.818237] set brightness = 115
[10701.834259] set brightness = 125
[10701.851501] set brightness = 135
[10701.867584] set brightness = 144
[10701.884002] set brightness = 154
[10701.900329] set brightness = 164
[10703.002746] msm72k_udc: usb: suspend
[10704.040771] batt: M2A_RPC: cable_update: none at 10701293308606 (2012-02-13 23:59:07.357744668 UTC)
[10704.041259] batt: htc_cable_status_update: 1 -> 0
[10704.041503] msm_hsusb_set_vbus_state: 0
[10704.041687] supersonic_uart_usb_switch:uart:1
[10704.041839] supersonic_uart_usb_switch:Non wimax UART
[10704.042114] batt: Update SMEM: cable type 0 at 10701294529309 (2012-02-13 23:59:07.359087442 UTC)
[10704.042480] batt: batt:(htc_cable_status_update)power_supply_changed: battery at 10701295017590 (2012-02-13 23:59:07.359453653 UTC)
[10704.044067] hsusb: ONLINE -> OFFLINE
[10704.050170] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4094, batt_temp=361, batt_current=0, eval_current=350, level=100, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0
[10704.065551] msm72k_udc: usb_ept_queue_xfer() called while offline
[10704.071533] adb_release
[10704.074096] adb_open
[10704.076324] usb: notify offline
[10704.105316] msm_hsusb_phy_reset
[10704.105712] adb_release
[10704.106048] adb_open
[10704.115539]  at 10701367740979 (2012-02-13 23:59:07.367113565 UTC)
[10704.116058] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4094, batt_temp=361, batt_current=0, eval_current=350, level=100, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10701377201428 (2012-02-13 23:59:07.433031533 UTC)
[10704.157897] usb: lpm enter
[10704.158111] usb_suspend_phy
[10704.159454] usb: send connect type 0
[10704.159729] batt:online=0
[10704.159881] batt: Update SMEM: cable type 0 at 10701412418712 (2012-02-13 23:59:07.476854774 UTC)
[10704.200958] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4094, batt_temp=361, batt_current=0, eval_current=350, level=100, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10701453617443 (2012-02-13 23:59:07.517900917 UTC)
[10704.201812] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4094, batt_temp=361, batt_current=0, eval_current=350, level=100, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10701454471935 (2012-02-13 23:59:07.518785927 UTC)
[10704.210479] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4094, batt_temp=361, batt_current=0, eval_current=350, level=100, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10701462742199 (2012-02-13 23:59:07.527452920 UTC)
[10704.210601] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4094, batt_temp=361, batt_current=0, eval_current=350, level=100, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10701462833752 (2012-02-13 23:59:07.527544473 UTC)
[10704.246185] msmfb_start_dma 34.973 ms after vsync request
[10704.257720] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4094, batt_temp=361, batt_current=0, eval_current=350, level=100, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10701527714122 (2012-02-13 23:59:07.574663612 UTC)
[10704.276123] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4094, batt_temp=361, batt_current=0, eval_current=350, level=100, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0
[10704.291168] msmfb_start_dma 21.667 ms after vsync request
[10704.325592]  at 10701577793469 (2012-02-13 23:59:07.593096229 UTC)
[10704.891784] Audio: supersonic_speaker_enable 0
[10704.897857] tpa2018d1_set_speaker_amp: OFF
[10704.905334] pcm_out: release
[10705.427154] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
[10705.614501] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
[10706.167236] set brightness = 0
[10706.168334] request_suspend_state: sleep (0->3) at 10703420505872 (2012-02-13 23:59:09.485247110 UTC)
[10706.169250] [R] early_suspend start
[10706.170135] lightsensor_ioctl set value = 0
[10706.170898] lightsensor_disable
[10706.268371] __spi_bma150_set_mode: BMA get into SLEEP mode!
[10706.268585] bma150_early_suspend: spi_bma150_set_mode returned = 0!
[10706.286743] supersonic_panel_blank
[10706.286956] set brightness = 0
[10706.287811] [hdmi/fb]hdmifb_suspend, use_count=0
[10706.288177] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
[10706.288452] [hdmi/lcdc]lcdc_suspend
[10706.288787] [hdmi/tx]hdmi_panel_uninit
[10706.289001] [hdmi]suc_hdmi_gpio_off
[10706.289611] [hdmi/tx]suspending=true, disable timer
[10706.289978] [hdmi/tx]hdmi_panel_uninit
[10706.290191] [hdmi/tx]hdmi_standby
[10706.290405] [hdmi]hdmi_power(4)
[10706.290771] [hdmi/lcdc]lcdc_disable_video, blank_count=0
[10706.308532] __capella_cm3602_power: Turn the capella_cm3602 power off
[10706.309082] atmel_ts_suspend: enter
[10706.438507] __spi_bma150_set_mode: BMA get into SLEEP mode!
[10706.457885] mddi_epson_power: power off.
[10706.628112] [R] early_suspend: sync
[10706.694946] [R] early_suspend end
[10707.431884] batt: M2A_RPC: level_update: 99 at 10704684910169 (2012-02-13 23:59:10.748827432 UTC)
[10707.433197] batt: batt:power_supply_changed: battery at 10704686222425 (2012-02-13 23:59:10.750170206 UTC)
[10707.554565] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4123, batt_temp=357, batt_current=0, eval_current=86, level=99, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10704807316173 (2012-02-13 23:59:10.871508095 UTC)
[10707.555328] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4123, batt_temp=357, batt_current=0, eval_current=86, level=99, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10704808079113 (2012-02-13 23:59:10.872301552 UTC)
[10709.235046] PM: Syncing filesystems ... done.
[10709.236480] Freezing user space processes ...
[10709.241333] Freezing of user space  aborted
[10709.242095]
[10709.242279] Restarting tasks ... done.
[10709.251464] suspend: exit suspend, ret = -16 (2012-02-13 23:59:12.568407510 UTC)
[10709.252990] PM: Syncing filesystems ... done.
[10709.259307] Freezing user space processes ...
[10709.263214] Freezing of user space  aborted
[10709.264007]
[10709.264160] Restarting tasks ... done.
[10709.271209] suspend: exit suspend, ret = -16 (2012-02-13 23:59:12.588152384 UTC)
[10709.273132] PM: Syncing filesystems ... done.
[10709.274871] Freezing user space processes ... (elapsed 0.02 seconds) done.
[10709.298522] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[10709.357574] msmsdcc_suspend enter
[10709.358673] supersonic_sdslot_switchvdd: Disabling SD slot power
[10709.360168] msmsdcc_suspend leave
[10709.360687] msmsdcc_suspend enter
[10709.361206] msmsdcc_suspend leave
[10709.361694] msmsdcc_suspend enter
[10709.362182] msmsdcc_suspend leave
[10709.363159] PM: suspend of devices complete after 41.564 msecs
[10709.365325] PM: late suspend of devices complete after 1.220 msecs
[10709.365325] clocks on: uart_clk sdc_pclk sdc_clk
[10709.365325] [R] suspend end
[10709.365325] [R] resume start
[10709.365325] wakeup wake lock: SMD_DS
[10709.366882] PM: early resume of devices complete after 1.678 msecs
[10709.367950] msmsdcc_resume enter
[10709.368591] msmsdcc_resume enter
[10709.369354] mmc1: Enable clocks
[10709.369812] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
[10709.370666] msmsdcc_resume enter
[10709.378540] PM: resume of devices complete after 10.772 msecs
[10709.379791] Restarting tasks ... done.
[10709.417907] suspend: exit suspend, ret = 0 (2012-02-13 23:59:22.539684654 UTC)
[10710.367523] mmc1: Bus clock timer expired
[10710.367797] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
[10710.368011] mmc1: Disable clocks
[10711.298950] PM: Syncing filesystems ... done.
[10711.300415] Freezing user space processes ... (elapsed 0.01 seconds) done.
[10711.318481] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[10711.354034] msmsdcc_suspend enter
[10711.354248] msmsdcc_suspend leave
[10711.354553] msmsdcc_suspend enter
[10711.354736] msmsdcc_suspend leave
[10711.354919] msmsdcc_suspend enter
[10711.355224] msmsdcc_suspend leave
[10711.355560] PM: suspend of devices complete after 16.783 msecs
[10711.356201] PM: late suspend of devices complete after 0.427 msecs
[10711.356201] clocks on: uart_clk sdc_pclk sdc_clk
[10711.356201] [R] suspend end
[10711.356201] [R] resume start
[10711.356201] wakeup wake lock: SMD_DATA5
[10711.356933] PM: early resume of devices complete after 0.793 msecs
[10711.358154] msmsdcc_resume enter
[10711.358917] msmsdcc_resume enter
[10711.359375] mmc1: Enable clocks
[10711.360137] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
[10711.360717] msmsdcc_resume enter
[10711.370697] PM: resume of devices complete after 12.907 msecs
[10711.372283] Restarting tasks ... done.
[10711.407989] suspend: exit suspend, ret = 0 (2012-02-13 23:59:25.537608876 UTC)
[10711.859222] PM: Syncing filesystems ... done.
[10711.860687] Freezing user space processes ... (elapsed 0.01 seconds) done.
[10711.878265] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[10711.904113] msmsdcc_suspend enter
[10711.904357] msmsdcc_suspend leave
[10711.904541] msmsdcc_suspend enter
[10711.904754] mmc1: Disable clocks in msmsdcc_suspend
[10711.905059] msmsdcc_suspend leave
[10711.905242] msmsdcc_suspend enter
[10711.905517] msmsdcc_suspend leave
[10711.905944] PM: suspend of devices complete after 7.292 msecs
[10711.906524] PM: late suspend of devices complete after 0.366 msecs
[10711.906524] clocks on: uart_clk sdc_pclk sdc_clk
[10711.906524] [R] suspend end
[10711.906524] [R] resume start
[10711.906524] wakeup wake lock: SMD_DATA5
[10711.907287] PM: early resume of devices complete after 0.823 msecs
[10711.907836] msmsdcc_resume enter
[10711.908142] msmsdcc_resume enter
[10711.908325] mmc1: Enable clocks
[10711.908508] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
[10711.908874] msmsdcc_resume enter
[10711.911804] PM: resume of devices complete after 3.997 msecs
[10711.912353] Restarting tasks ... done.
[10711.928375] suspend: exit suspend, ret = 0 (2012-02-13 23:59:26.058274328 UTC)
[10712.907409] mmc1: Bus clock timer expired
[10712.907592] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
[10712.907867] mmc1: Disable clocks
[10713.578674] PM: Syncing filesystems ... done.
[10713.580108] Freezing user space processes ... (elapsed 0.01 seconds) done.
[10713.598114] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[10713.633544] msmsdcc_suspend enter
[10713.633850] msmsdcc_suspend leave
[10713.634094] msmsdcc_suspend enter
[10713.634368] msmsdcc_suspend leave
[10713.634826] msmsdcc_suspend enter
[10713.635101] msmsdcc_suspend leave
[10713.635589] PM: suspend of devices complete after 16.111 msecs
[10713.636718] pm_noirq_op(): platform_pm_suspend_noirq+0x0/0x40 returns -11
[10713.637023] PM: Device power.0 failed to suspend late: error -11
[10713.637847] PM: early resume of devices complete after 0.274 msecs
[10713.638458] PM: Some devices failed to power down
[10713.638824] msmsdcc_resume enter
[10713.641815] msmsdcc_resume enter
[10713.644897] mmc1: Enable clocks
[10713.648254] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
[10713.654510] msmsdcc_resume enter
[10713.662322] wakeup wake lock: SMD_RPCCALL
[10713.666473] PM: resume of devices complete after 27.737 msecs
[10713.667999] Restarting tasks ... done.
[10713.688720] suspend: exit suspend, ret = 0 (2012-02-13 23:59:27.818070803 UTC)
[10714.338745] PM: Syncing filesystems ... done.
[10714.340301] Freezing user space processes ... (elapsed 0.01 seconds) done.
[10714.358154] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[10714.393188] msmsdcc_suspend enter
[10714.393615] msmsdcc_suspend leave
[10714.394134] msmsdcc_suspend enter
[10714.394439] mmc1: Disable clocks in msmsdcc_suspend
[10714.394775] msmsdcc_suspend leave
[10714.395294] msmsdcc_suspend enter
[10714.395690] msmsdcc_suspend leave
[10714.396270] PM: suspend of devices complete after 16.692 msecs
[10714.397583] PM: late suspend of devices complete after 0.762 msecs
[10714.397583] clocks on: uart_clk sdc_pclk sdc_clk
[10714.397583] [R] suspend end
[10714.397583] [R] resume start
[10714.397583] wakeup wake lock: SMD_RPCCALL
[10714.398284] batt: M2A_RPC: level_update: 98 at 10711651717661 (2012-02-13 23:59:28.528175506 UTC)
[10714.398956] batt: batt:power_supply_changed: battery at 10711652602645 (2012-02-13 23:59:28.528846872 UTC)
[10714.400543] PM: early resume of devices complete after 3.082 msecs
[10714.401550] msmsdcc_resume enter
[10714.402008] msmsdcc_resume enter
[10714.402282] mmc1: Enable clocks
[10714.402801] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
[10714.403198] msmsdcc_resume enter
[10714.413818] PM: resume of devices complete after 12.388 msecs
[10714.414916] Restarting tasks ...
[10714.424407] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4112, batt_temp=361, batt_current=0, eval_current=114, level=98, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0done.
[10714.447387] suspend: exit suspend, ret = 0 (2012-02-13 23:59:41.533828060 UTC)
[10714.449615] PM: Syncing filesystems ...  at 10711703424946 (2012-02-13 23:59:41.510861087 UTC)
[10714.450988] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4112, batt_temp=361, batt_current=0, eval_current=114, level=98, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0done.
[10714.466613] Freezing user space processes ...  at 10711730655533 (2012-02-13 23:59:41.537426195 UTC)
[10714.497406] (elapsed 0.02 seconds) done.
[10714.497680] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[10714.544952] msmsdcc_suspend enter
[10714.545532] msmsdcc_suspend leave
[10714.545867] msmsdcc_suspend enter
[10714.546478] mmc1: Disable clocks in msmsdcc_suspend
[10714.546875] msmsdcc_suspend leave
[10714.547302] msmsdcc_suspend enter
[10714.548065] msmsdcc_suspend leave
[10714.548736] PM: suspend of devices complete after 28.483 msecs
[10714.550048] PM: late suspend of devices complete after 0.884 msecs
[10714.550048] clocks on: uart_clk sdc_pclk sdc_clk
[10714.550048] [R] suspend end
[10714.550048] [R] resume start
[10714.550811] PM: early resume of devices complete after 0.731 msecs
[10714.551391] wakeup wake lock: gpio_input
[10714.552337] msmsdcc_resume enter
[10714.552948] msmsdcc_resume enter
[10714.553283] mmc1: Enable clocks
[10714.553894] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
[10714.554351] msmsdcc_resume enter
[10714.560607] PM: resume of devices complete after 8.386 msecs
[10714.561767] Restarting tasks ... done.
[10714.592132] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
[10714.596832] request_suspend_state: wakeup (3->0) at 10711850626737 (2012-02-14 00:00:02.536502039 UTC)
[10714.598114] lightsensor_ioctl set value = 1
[10714.598480] lightsensor_enable
[10714.598846] lightsensor_enable: microp is suspended
[10714.613250] set brightness = 10
[10714.623962] suspend: exit suspend, ret = 0 (2012-02-14 00:00:02.563641616 UTC)
[10714.624694] [R] late_resume start
[10714.629180] set brightness = 21
[10714.644836] set brightness = 32
[10714.662719] set brightness = 43
[10714.679412] set brightness = 54
[10714.687072] __spi_bma150_set_mode: BMA get into NORMAL mode!
[10714.695037] set brightness = 65
[10714.710784] set brightness = 76
[10714.716522] mddi_wait_interrupt 2538, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
[10714.727905] set brightness = 87
[10714.744537] set brightness = 98
[10714.761199] set brightness = 109
[10714.777008] set brightness = 120
[10714.794403] set brightness = 131
[10714.810058] set brightness = 142
[10714.816528] mddi_wait_interrupt 2538, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
[10714.816864] mddi_epson_power: power on.
[10714.825775] set brightness = 153
[10714.826812] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
[10714.842468] set brightness = 164
[10715.133331] msmfb: ready, waiting for full update
[10715.148712] [CAM]ov8810_resume
[10715.149230] __capella_cm3602_power: Turn the capella_cm3602 power on
[10715.150146] [hdmi/fb]hdmifb_resume
[10715.150604] [hdmi/lcdc]lcdc_resume
[10715.151031] [hdmi/tx]hdmi_panel_init
[10715.151824] [hdmi]suc_hdmi_gpio_on
[10715.152954] [hdmi]hdmi_power(5)
[10715.153564] [R] late_resume end
[10715.156921] Touch Status: 0x01 0x10 0xEA 0xD8 0x09
[10715.169860] msmfb: pan_update in state(1)
[10715.169891] msmfb: full update starting
[10715.173645] Touch Status: 0x01 0x00 0xEA 0xD8 0x09
[10715.204681] msmfb: full update completed
[10715.206115] msmfb: turning on panel
[10715.206695] supersonic_panel_unblank
[10715.207153] turn on backlight
[10715.207580] set brightness = 164
[10715.546691] mmc1: Bus clock timer expired
[10715.546875] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
[10715.547149] mmc1: Disable clocks
[10716.007385] ALS value: 0x12, level: 3 #
[10716.087402] ALS value: 0x12, level: 3 #
[10716.391143] S1@113,647
[10716.719696] E1@345,994
[10717.947509] ALS value: 0x6, level: 1 #
[10718.195587] check_calibration: calibration confirm
[10718.887512] ALS value: 0xA, level: 2 #
[10719.827484] ALS value: 0x4, level: 1 #
[10721.707519] ALS value: 0x8, level: 2 #
[10722.657562] ALS value: 0x6, level: 1 #
[10723.408599] sequans_xxx: Sequans SDIO WiMAX driver, version 1.2.153
[10723.408905] sequans_xxx: Copyright SEQUANS Communications
[10723.409088] mmc_wimax_power
[10723.607757] ALS value: 0x3, level: 0 #
[10724.577392] ALS value: 0x4, level: 1 #
[10724.624633] mmc_wimax_set_carddetect: 1
[10724.624816] mmc1: card_present 1
[10724.625061] supersonic_wimax_status
[10724.625213] mmc1: Slot status change detected (0 -> 1)
[10724.625396] mmc_wimax_set_status on:1
[10724.626953] sequans_xxx: Driver has been registered
[10726.427551] ALS value: 0xA, level: 2 #
[10727.116882] mmc1: Enable clocks
[10727.182159] mmc1: card claims to support voltages below the defined range. These will be ignored.
[10727.207489] mmc1: new SDIO card at address 0001
[10727.214874] sequans_xxx: module parameters: firmware_name='sequans_boot.bin' load_firmware=1
[10727.215759] sequans_xxx: found SQN1210 card
[10727.216644] sequans_xxx: trying to find bootloader image: "../../../data/wimax/Boot.bin"
[10727.255096] sequans_xxx: loading bootloader to the card...
[10727.255615] sequans_xxx: setting MAC address from bootloader: 64:a7:69:a5:e3:8d
[10727.270782] sequans_xxx: bootting the card...
[10727.271301] sequans_xxx:   done
[10727.282043] sequans_xxx: wimax0: Sequans WiMAX adapter
[10727.283020] sequans_xxx: wait until FW is started...
[10727.377532] ALS value: 0x22, level: 3 #
[10727.786895] sequans_xxx: setup GPIO40 for wakeup form SQN1210
[10727.788238] sequans_xxx: KTHP initialized
[10727.789031] sequans_xxx: card initialized successfuly
[10728.347503] ALS value: 0x0, level: 0 #
[10729.248016] ALS value: 0x16, level: 3 #
[10730.188018] ALS value: 0x0, level: 0 #
[10731.137969] ALS value: 0x6, level: 1 #
[10733.017944] ALS value: 0xD, level: 3 #
[10733.957641] ALS value: 0x0, level: 0 #
[10735.837585] ALS value: 0x8, level: 2 #
[10736.788421] ALS value: 0x4, level: 1 #
[10739.612121] ALS value: 0x6, level: 1 #
[10740.547851] ALS value: 0x4, level: 1 #
[10740.707611] provisioning: page allocation failure. order:5, mode:0xd0
[10740.708282] Backtrace:
[10740.708953] [<c0034bb4>] (dump_backtrace+0x0/0x110) from [<c03cfcb0>] (dump_stack+0x18/0x1c)
[10740.709655]  r7:c0505678 r6:00000001 r5:00000005 r4:000000d0
[10740.711212] [<c03cfc98>] (dump_stack+0x0/0x1c) from [<c00aeb84>] (__alloc_pages_nodemask+0x524/0x57c)
[10740.711975] [<c00ae660>] (__alloc_pages_nodemask+0x0/0x57c) from [<c00ce71c>] (cache_alloc_refill+0x2e8/0x5b4)
[10740.712707] [<c00ce434>] (cache_alloc_refill+0x0/0x5b4) from [<c00ceb18>] (kmem_cache_alloc+0x58/0x9c)
[10740.715057] [<c00ceac0>] (kmem_cache_alloc+0x0/0x9c) from [<c0233f50>] (mtd_read+0x8c/0x264)
[10740.730865]  r7:d26edf70 r6:db9f0800 r5:cc6c3840 r4:00040000
[10740.731597] [<c0233ec4>] (mtd_read+0x0/0x264) from [<c00d1cfc>] (vfs_read+0xb4/0x140)
[10740.736602] [<c00d1c48>] (vfs_read+0x0/0x140) from [<c00d1e4c>] (sys_read+0x44/0x70)
[10740.744781]  r8:00040000 r7:00000000 r6:00b00000 r5:40042008 r4:cc6c3840
[10740.751007] [<c00d1e08>] (sys_read+0x0/0x70) from [<c0030ec0>] (ret_fast_syscall+0x0/0x30)
[10740.759490]  r8:c0031044 r7:00000003 r6:00145941 r5:0000000d r4:0018ee4c
[10740.765808] Mem-info:
[10740.768341] Normal per-cpu:
[10740.771148] CPU    0: hi:  186, btch:  31 usd: 179
[10740.775634] active_anon:50895 inactive_anon:80 isolated_anon:0
[10740.775665]  active_file:16192 inactive_file:25423 isolated_file:0
[10740.775665]  unevictable:35 dirty:0 writeback:0 unstable:0
[10740.775665]  free:4216 slab_reclaimable:1545 slab_unreclaimable:2772
[10740.775665]  mapped:10378 shmem:97 pagetables:2341 bounce:0
[10740.806091] Normal free:16864kB min:2624kB low:3280kB high:3936kB active_anon:203580kB inactive_anon:320kB active_file:64768kB inactive_file:101692kB unevictable:140kB isolated(anon):0kB isolated(file):0kB present:430592kB mlocked:0kB dirty:0kB writeback:0kB mapped:41520kB shmem:388kB slab_reclaimable:6180kB slab_unreclaimable:11088kB kernel_stack:4480kB pagetables:9364kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:10 all_unreclaimable? no
[10740.849334] lowmem_reserve[]: 0 0
[10740.850036] Normal: 1830*4kB 263*8kB 169*16kB 88*32kB 26*64kB 2*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 16864kB
[10740.859313] 41757 total pagecache pages
[10740.882110] 108544 pages of RAM
[10740.882293] 5098 free pages
[10740.882537] 2472 reserved pages
[10740.882690] 4317 slab pages
[10740.882812] 131922 pages shared
[10740.882965] 0 pages swap cached
[10742.697082] sequans_xxx: card switched to DROPPED state
[10744.847076] sequans_xxx: got RX data, card is not asleep
[10747.787017] sequans_xxx: WiMAX carrier LOST [ignored]
[10747.787323] sequans_xxx: got RX data, card is not asleep
[10749.037597] ALS value: 0x8, level: 2 #
[10749.970855] ALS value: 0x4, level: 1 #
[10751.687072] sequans_xxx: WiMAX carrier LOST [ignored]
[10751.797149] sequans_xxx: WiMAX carrier PRESENT [ignored]
[10762.386779] wimax0: no IPv6 routers present
[10762.939086] wds: 0021 @ 01
[10762.939361] qmi: wds: network stopped
[10762.939575] wds: 0022 @ ff
[10762.939727] qmi: wds: DISCONNECTED
[10762.940185] rmnet_stop()
[10782.917510] ALS value: 0x0, level: 0 #
[10783.867645] ALS value: 0x3, level: 0 #
[10783.935333] batt: M2A_RPC: level_update: 97 at 10781189509602 (2012-02-14 00:01:11.874438859 UTC)
[10783.937072] batt: batt:power_supply_changed: battery at 10781191218587 (2012-02-14 00:01:11.876208879 UTC)
[10783.942779] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4053, batt_temp=369, batt_current=0, eval_current=392, level=97, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10781197566243 (2012-02-14 00:01:11.881854631 UTC)
[10783.945098] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4053, batt_temp=369, batt_current=0, eval_current=392, level=97, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10781206141683 (2012-02-14 00:01:11.884204484 UTC)
[10788.568145] ALS value: 0x3, level: 0 #
[10789.527740] ALS value: 0x2, level: 0 #
[10794.257537] ALS value: 0x3, level: 0 #
[10795.167572] ALS value: 0x2, level: 0 #
[10798.928466] ALS value: 0x3, level: 0 #
[10799.867736] ALS value: 0x2, level: 0 #
[10824.357574] ALS value: 0x0, level: 0 #
[10825.337554] ALS value: 0x2, level: 0 #
[10828.942962] mmc2: Starting deferred resume
[10828.948791] supersonic_sdslot_switchvdd: Setting level to 2850 (Success)
[10829.512512] mmc2: Deferred resume completed
[10839.437622] ALS value: 0x2, level: 0 #
[10840.407592] ALS value: 0x3, level: 0 #
[10849.787750] ALS value: 0x3, level: 0 #
[10850.727661] ALS value: 0x3, level: 0 #
[10854.817230] sequans_xxx: card switched to IDLE state
[10854.842163] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10855.836853] mmc1: Bus clock timer expired
[10855.837219] set GPIO40 as waketup source
[10855.837371] mmc1: Disable clocks
[10855.837554] mmc1: Enable clocks
[10855.837707] disable GPIO40 wakeup source
[10856.162078] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10857.156921] mmc1: Bus clock timer expired
[10857.157287] set GPIO40 as waketup source
[10857.157501] mmc1: Disable clocks
[10857.157714] mmc1: Enable clocks
[10857.158020] disable GPIO40 wakeup source
[10857.252014] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10858.247222] mmc1: Bus clock timer expired
[10858.247528] set GPIO40 as waketup source
[10858.247741] mmc1: Disable clocks
[10858.247924] mmc1: Enable clocks
[10858.248168] disable GPIO40 wakeup source
[10858.271850] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10859.266845] mmc1: Bus clock timer expired
[10859.267761] set GPIO40 as waketup source
[10859.268280] mmc1: Disable clocks
[10859.268798] mmc1: Enable clocks
[10859.269653] disable GPIO40 wakeup source
[10859.302093] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10860.296783] mmc1: Bus clock timer expired
[10860.297058] set GPIO40 as waketup source
[10860.297241] mmc1: Disable clocks
[10860.297424] mmc1: Enable clocks
[10860.297668] disable GPIO40 wakeup source
[10860.322021] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10861.316772] mmc1: Bus clock timer expired
[10861.316955] set GPIO40 as waketup source
[10861.317138] mmc1: Disable clocks
[10861.317291] mmc1: Enable clocks
[10861.317535] disable GPIO40 wakeup source
[10861.351867] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10862.346771] mmc1: Bus clock timer expired
[10862.346984] set GPIO40 as waketup source
[10862.347167] mmc1: Disable clocks
[10862.347442] mmc1: Enable clocks
[10862.347595] disable GPIO40 wakeup source
[10862.561950] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10863.556854] mmc1: Bus clock timer expired
[10863.557342] set GPIO40 as waketup source
[10863.557861] mmc1: Disable clocks
[10863.558685] mmc1: Enable clocks
[10863.559143] disable GPIO40 wakeup source
[10863.841857] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10864.836883] mmc1: Bus clock timer expired
[10864.837402] set GPIO40 as waketup source
[10864.837860] mmc1: Disable clocks
[10864.838714] mmc1: Enable clocks
[10864.839172] disable GPIO40 wakeup source
[10865.121887] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10866.116912] mmc1: Bus clock timer expired
[10866.116912] set GPIO40 as waketup source
[10866.116943] mmc1: Disable clocks
[10866.117034] mmc1: Enable clocks
[10866.117065] disable GPIO40 wakeup source
[10866.402069] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10867.396789] mmc1: Bus clock timer expired
[10867.396820] set GPIO40 as waketup source
[10867.396820] mmc1: Disable clocks
[10867.396850] mmc1: Enable clocks
[10867.396850] disable GPIO40 wakeup source
[10867.681976] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10868.676818] mmc1: Bus clock timer expired
[10868.677307] set GPIO40 as waketup source
[10868.678100] mmc1: Disable clocks
[10868.678588] mmc1: Enable clocks
[10868.679046] disable GPIO40 wakeup source
[10868.962066] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10869.956909] mmc1: Bus clock timer expired
[10869.957489] set GPIO40 as waketup source
[10869.958374] mmc1: Disable clocks
[10869.958923] mmc1: Enable clocks
[10869.959411] disable GPIO40 wakeup source
[10870.242218] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10871.236938] mmc1: Bus clock timer expired
[10871.237518] set GPIO40 as waketup source
[10871.238372] mmc1: Disable clocks
[10871.238922] mmc1: Enable clocks
[10871.239410] disable GPIO40 wakeup source
[10871.522033] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10872.516906] mmc1: Bus clock timer expired
[10872.517456] set GPIO40 as waketup source
[10872.518371] mmc1: Disable clocks
[10872.518920] mmc1: Enable clocks
[10872.519409] disable GPIO40 wakeup source
[10872.802062] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10873.796813] mmc1: Bus clock timer expired
[10873.797363] set GPIO40 as waketup source
[10873.798248] mmc1: Disable clocks
[10873.798797] mmc1: Enable clocks
[10873.799285] disable GPIO40 wakeup source
[10873.944824] batt: M2A_RPC: level_update: 96 at 10871198664875 (2012-02-14 00:02:41.883899308 UTC)
[10873.946380] batt: batt:power_supply_changed: battery
[10873.951354] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4038, batt_temp=373, batt_current=0, eval_current=464, level=96, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10871206568927 (2012-02-14 00:02:41.890430069 UTC)
[10873.954101] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4038, batt_temp=373, batt_current=0, eval_current=464, level=96, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10871208949298 (2012-02-14 00:02:41.893207169 UTC)
[10873.961547]  at 10871214747639 (2012-02-14 00:02:41.885516740 UTC)
[10874.082031] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10874.277801] ALS value: 0x0, level: 0 #
[10875.012481] sequans_xxx: waking up the card...
[10875.016357] sequans_xxx: wait for completion (timeout 800 msec)...
[10875.087493] sequans_xxx: card is waked up successfully
[10877.107635] ALS value: 0x2, level: 0 #
[10879.927520] ALS value: 0x0, level: 0 #
[10880.027770] sequans_xxx: got RX data, card is not asleep
[10880.047149] sequans_xxx: got RX data, card is not asleep
[10881.817596] ALS value: 0x6, level: 1 #
[10886.547637] ALS value: 0x0, level: 0 #
[10887.467651] ALS value: 0x4, level: 1 #
[10888.407562] ALS value: 0x3, level: 0 #
[10893.157714] ALS value: 0x3, level: 0 #
[10895.597564] sequans_xxx: card switched to IDLE state
[10895.652069] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10896.646820] mmc1: Bus clock timer expired
[10896.647369] set GPIO40 as waketup source
[10896.648254] mmc1: Disable clocks
[10896.648773] mmc1: Enable clocks
[10896.649261] disable GPIO40 wakeup source
[10896.772033] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10897.766876] mmc1: Bus clock timer expired
[10897.767456] set GPIO40 as waketup source
[10897.768341] mmc1: Disable clocks
[10897.768890] mmc1: Enable clocks
[10897.769409] disable GPIO40 wakeup source
[10897.792022] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10898.786804] mmc1: Bus clock timer expired
[10898.787353] set GPIO40 as waketup source
[10898.788238] mmc1: Disable clocks
[10898.788787] mmc1: Enable clocks
[10898.789276] disable GPIO40 wakeup source
[10898.812072] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10899.806854] mmc1: Bus clock timer expired
[10899.806884] set GPIO40 as waketup source
[10899.806945] mmc1: Disable clocks
[10899.807006] mmc1: Enable clocks
[10899.807037] disable GPIO40 wakeup source
[10899.832275] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10900.826812] mmc1: Bus clock timer expired
[10900.827362] set GPIO40 as waketup source
[10900.828247] mmc1: Disable clocks
[10900.828765] mmc1: Enable clocks
[10900.829284] disable GPIO40 wakeup source
[10900.852050] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10901.249847] sequans_xxx: waking up the card...
[10901.252197] sequans_xxx: wait for completion (timeout 800 msec)...
[10901.597534] ALS value: 0x0, level: 0 #
[10901.857513] sequans_xxx: card is waked up successfully
[10904.267639] sequans_xxx: got RX data, card is not asleep
[10904.287139] sequans_xxx: got RX data, card is not asleep
[10912.897613] ALS value: 0x3, level: 0 #
[10914.797668] ALS value: 0x3, level: 0 #
[10915.717712] ALS value: 0x3, level: 0 #
[10916.657623] ALS value: 0x0, level: 0 #
[10918.967193] sequans_xxx: card switched to IDLE state
[10919.011840] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10920.006805] mmc1: Bus clock timer expired
[10920.007354] set GPIO40 as waketup source
[10920.008270] mmc1: Disable clocks
[10920.008789] mmc1: Enable clocks
[10920.009277] disable GPIO40 wakeup source
[10920.152069] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10921.146850] mmc1: Bus clock timer expired
[10921.147399] set GPIO40 as waketup source
[10921.148284] mmc1: Disable clocks
[10921.148834] mmc1: Enable clocks
[10921.149291] disable GPIO40 wakeup source
[10921.431915] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10922.426940] mmc1: Bus clock timer expired
[10922.427490] set GPIO40 as waketup source
[10922.428405] mmc1: Disable clocks
[10922.428955] mmc1: Enable clocks
[10922.429443] disable GPIO40 wakeup source
[10922.711914] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10923.706817] mmc1: Bus clock timer expired
[10923.706848] set GPIO40 as waketup source
[10923.706848] mmc1: Disable clocks
[10923.706909] mmc1: Enable clocks
[10923.706909] disable GPIO40 wakeup source
[10923.992095] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10924.986846] mmc1: Bus clock timer expired
[10924.987670] set GPIO40 as waketup source
[10924.988128] mmc1: Disable clocks
[10924.988586] mmc1: Enable clocks
[10924.989044] disable GPIO40 wakeup source
[10925.137603] ALS value: 0x3, level: 0 #
[10925.272033] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10926.067535] ALS value: 0x0, level: 0 #
[10926.266876] mmc1: Bus clock timer expired
[10926.267425] set GPIO40 as waketup source
[10926.268310] mmc1: Disable clocks
[10926.268829] mmc1: Enable clocks
[10926.269317] disable GPIO40 wakeup source
[10926.562286] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10927.556976] mmc1: Bus clock timer expired
[10927.557525] set GPIO40 as waketup source
[10927.558410] mmc1: Disable clocks
[10927.558959] mmc1: Enable clocks
[10927.559448] disable GPIO40 wakeup source
[10928.592071] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10929.586853] mmc1: Bus clock timer expired
[10929.587158] set GPIO40 as waketup source
[10929.587585] mmc1: Disable clocks
[10929.587860] mmc1: Enable clocks
[10929.588104] disable GPIO40 wakeup source
[10929.611846] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10930.606781] mmc1: Bus clock timer expired
[10930.607604] set GPIO40 as waketup source
[10930.608062] mmc1: Disable clocks
[10930.608551] mmc1: Enable clocks
[10930.608978] disable GPIO40 wakeup source
[10930.632080] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10931.626831] mmc1: Bus clock timer expired
[10931.627655] set GPIO40 as waketup source
[10931.628112] mmc1: Disable clocks
[10931.628601] mmc1: Enable clocks
[10931.629058] disable GPIO40 wakeup source
[10931.672027] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10932.666839] mmc1: Bus clock timer expired
[10932.667755] set GPIO40 as waketup source
[10932.668304] mmc1: Disable clocks
[10932.668823] mmc1: Enable clocks
[10932.669677] disable GPIO40 wakeup source
[10932.952087] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10933.935119] batt: M2A_RPC: level_update: 95 at 10931189265449 (2012-02-14 00:03:41.874194706 UTC)
[10933.936584] batt: batt:power_supply_changed: battery at 10931190791328 (2012-02-14 00:03:41.875720585 UTC)
[10933.942687] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4041, batt_temp=373, batt_current=0, eval_current=404, level=95, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10931197505195 (2012-02-14 00:03:41.881793583 UTC)
[10933.945037] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4041, batt_temp=373, batt_current=0, eval_current=404, level=95, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0
[10933.950012] mmc1: Bus clock timer expired
[10933.953277] set GPIO40 as waketup source
[10933.957153] mmc1: Disable clocks
[10933.960723] mmc1: Enable clocks
[10933.963500] disable GPIO40 wakeup source
[10933.970031]  at 10931223262031 (2012-02-14 00:03:41.884143437 UTC)
[10934.232025] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10934.537597] ALS value: 0x3, level: 0 #
[10935.226806] mmc1: Bus clock timer expired
[10935.227661] set GPIO40 as waketup source
[10935.228149] mmc1: Disable clocks
[10935.228607] mmc1: Enable clocks
[10935.229370] disable GPIO40 wakeup source
[10935.321990] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10936.316802] mmc1: Bus clock timer expired
[10936.317016] set GPIO40 as waketup source
[10936.317230] mmc1: Disable clocks
[10936.317565] mmc1: Enable clocks
[10936.317718] disable GPIO40 wakeup source
[10936.441894] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10936.457489] ALS value: 0x0, level: 0 #
[10937.436859] mmc1: Bus clock timer expired
[10937.437438] set GPIO40 as waketup source
[10937.438323] mmc1: Disable clocks
[10937.438842] mmc1: Enable clocks
[10937.439331] disable GPIO40 wakeup source
[10937.462036] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10938.456848] mmc1: Bus clock timer expired
[10938.457397] set GPIO40 as waketup source
[10938.458282] mmc1: Disable clocks
[10938.458831] mmc1: Enable clocks
[10938.459320] disable GPIO40 wakeup source
[10938.492065] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10939.257507] ALS value: 0x3, level: 0 #
[10939.486816] mmc1: Bus clock timer expired
[10939.487731] set GPIO40 as waketup source
[10939.488250] mmc1: Disable clocks
[10939.488800] mmc1: Enable clocks
[10939.489654] disable GPIO40 wakeup source
[10939.512023] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10940.506835] mmc1: Bus clock timer expired
[10940.507781] set GPIO40 as waketup source
[10940.508331] mmc1: Disable clocks
[10940.508850] mmc1: Enable clocks
[10940.509704] disable GPIO40 wakeup source
[10940.532043] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10941.527221] mmc1: Bus clock timer expired
[10941.527404] set GPIO40 as waketup source
[10941.527618] mmc1: Disable clocks
[10941.527801] mmc1: Enable clocks
[10941.527954] disable GPIO40 wakeup source
[10941.911895] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10942.077514] ALS value: 0x0, level: 0 #
[10942.906829] mmc1: Bus clock timer expired
[10942.907409] set GPIO40 as waketup source
[10942.908264] mmc1: Disable clocks
[10942.908843] mmc1: Enable clocks
[10942.909332] disable GPIO40 wakeup source
[10943.002044] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10943.957611] ALS value: 0x3, level: 0 #
[10943.997131] mmc1: Bus clock timer expired
[10943.998016] set GPIO40 as waketup source
[10943.998535] mmc1: Disable clocks
[10943.999084] mmc1: Enable clocks
[10943.999938] disable GPIO40 wakeup source
[10944.032043] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10944.897644] ALS value: 0x0, level: 0 #
[10945.026824] mmc1: Bus clock timer expired
[10945.027374] set GPIO40 as waketup source
[10945.027893] mmc1: Disable clocks
[10945.028808] mmc1: Enable clocks
[10945.029296] disable GPIO40 wakeup source
[10945.052032] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10946.046844] mmc1: Bus clock timer expired
[10946.047424] set GPIO40 as waketup source
[10946.047943] mmc1: Disable clocks
[10946.048828] mmc1: Enable clocks
[10946.049316] disable GPIO40 wakeup source
[10946.072052] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10946.777648] ALS value: 0x3, level: 0 #
[10947.066833] mmc1: Bus clock timer expired
[10947.067382] set GPIO40 as waketup source
[10947.067901] mmc1: Disable clocks
[10947.068450] mmc1: Enable clocks
[10947.068939] disable GPIO40 wakeup source
[10947.092071] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10948.086822] mmc1: Bus clock timer expired
[10948.086822] set GPIO40 as waketup source
[10948.086853] mmc1: Disable clocks
[10948.086883] mmc1: Enable clocks
[10948.086883] disable GPIO40 wakeup source
[10948.121887] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10948.677612] ALS value: 0x0, level: 0 #
[10949.116821] mmc1: Bus clock timer expired
[10949.116851] set GPIO40 as waketup source
[10949.116882] mmc1: Disable clocks
[10949.116912] mmc1: Enable clocks
[10949.116912] disable GPIO40 wakeup source
[10949.242004] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10950.236877] mmc1: Bus clock timer expired
[10950.237426] set GPIO40 as waketup source
[10950.237945] mmc1: Disable clocks
[10950.238861] mmc1: Enable clocks
[10950.239349] disable GPIO40 wakeup source
[10950.262023] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10951.256835] mmc1: Bus clock timer expired
[10951.257415] set GPIO40 as waketup source
[10951.257934] mmc1: Disable clocks
[10951.258819] mmc1: Enable clocks
[10951.259307] disable GPIO40 wakeup source
[10951.282043] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10952.276855] mmc1: Bus clock timer expired
[10952.277343] set GPIO40 as waketup source
[10952.277832] mmc1: Disable clocks
[10952.278625] mmc1: Enable clocks
[10952.279052] disable GPIO40 wakeup source
[10952.302032] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10953.296905] mmc1: Bus clock timer expired
[10953.297485] set GPIO40 as waketup source
[10953.298339] mmc1: Disable clocks
[10953.298889] mmc1: Enable clocks
[10953.299377] disable GPIO40 wakeup source
[10953.322021] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10953.377593] ALS value: 0x2, level: 0 #
[10954.316894] mmc1: Bus clock timer expired
[10954.317810] set GPIO40 as waketup source
[10954.318359] mmc1: Disable clocks
[10954.318878] mmc1: Enable clocks
[10954.319366] disable GPIO40 wakeup source
[10954.342041] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10955.336944] mmc1: Bus clock timer expired
[10955.337860] set GPIO40 as waketup source
[10955.338378] mmc1: Disable clocks
[10955.338958] mmc1: Enable clocks
[10955.339813] disable GPIO40 wakeup source
[10955.372161] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10956.366821] mmc1: Bus clock timer expired
[10956.367736] set GPIO40 as waketup source
[10956.368255] mmc1: Disable clocks
[10956.368804] mmc1: Enable clocks
[10956.369659] disable GPIO40 wakeup source
[10956.402069] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10957.396820] mmc1: Bus clock timer expired
[10957.397735] set GPIO40 as waketup source
[10957.398254] mmc1: Disable clocks
[10957.398803] mmc1: Enable clocks
[10957.399688] disable GPIO40 wakeup source
[10957.432006] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10958.426849] mmc1: Bus clock timer expired
[10958.427764] set GPIO40 as waketup source
[10958.428283] mmc1: Disable clocks
[10958.428802] mmc1: Enable clocks
[10958.429656] disable GPIO40 wakeup source
[10958.452026] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10959.446807] mmc1: Bus clock timer expired
[10959.447357] set GPIO40 as waketup source
[10959.447875] mmc1: Disable clocks
[10959.448791] mmc1: Enable clocks
[10959.449279] disable GPIO40 wakeup source
[10959.472167] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10959.967529] ALS value: 0x3, level: 0 #
[10960.466888] mmc1: Bus clock timer expired
[10960.467132] set GPIO40 as waketup source
[10960.467559] mmc1: Disable clocks
[10960.467803] mmc1: Enable clocks
[10960.468017] disable GPIO40 wakeup source
[10960.492095] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10960.907653] ALS value: 0x3, level: 0 #
[10961.486877] mmc1: Bus clock timer expired
[10961.487213] set GPIO40 as waketup source
[10961.487396] mmc1: Disable clocks
[10961.487609] mmc1: Enable clocks
[10961.487884] disable GPIO40 wakeup source
[10961.511993] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10962.506805] mmc1: Bus clock timer expired
[10962.507385] set GPIO40 as waketup source
[10962.507690] mmc1: Disable clocks
[10962.508026] mmc1: Enable clocks
[10962.508544] disable GPIO40 wakeup source
[10962.531951] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10963.526855] mmc1: Bus clock timer expired
[10963.527801] set GPIO40 as waketup source
[10963.528320] mmc1: Disable clocks
[10963.528869] mmc1: Enable clocks
[10963.529693] disable GPIO40 wakeup source
[10963.562042] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10964.556884] mmc1: Bus clock timer expired
[10964.557464] set GPIO40 as waketup source
[10964.557983] mmc1: Disable clocks
[10964.558532] mmc1: Enable clocks
[10964.559020] disable GPIO40 wakeup source
[10964.592041] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10965.586853] mmc1: Bus clock timer expired
[10965.587432] set GPIO40 as waketup source
[10965.587951] mmc1: Disable clocks
[10965.588836] mmc1: Enable clocks
[10965.589324] disable GPIO40 wakeup source
[10965.612030] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10966.606903] mmc1: Bus clock timer expired
[10966.607452] set GPIO40 as waketup source
[10966.607971] mmc1: Disable clocks
[10966.608886] mmc1: Enable clocks
[10966.609375] disable GPIO40 wakeup source
[10966.631988] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10967.626831] mmc1: Bus clock timer expired
[10967.627380] set GPIO40 as waketup source
[10967.627899] mmc1: Disable clocks
[10967.628814] mmc1: Enable clocks
[10967.629272] disable GPIO40 wakeup source
[10967.652038] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10968.646911] mmc1: Bus clock timer expired
[10968.647491] set GPIO40 as waketup source
[10968.648010] mmc1: Disable clocks
[10968.648895] mmc1: Enable clocks
[10968.649383] disable GPIO40 wakeup source
[10968.792022] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10969.786804] mmc1: Bus clock timer expired
[10969.786987] set GPIO40 as waketup source
[10969.787261] mmc1: Disable clocks
[10969.787445] mmc1: Enable clocks
[10969.787628] disable GPIO40 wakeup source
[10970.071899] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10971.066802] mmc1: Bus clock timer expired
[10971.067108] set GPIO40 as waketup source
[10971.067504] mmc1: Disable clocks
[10971.067779] mmc1: Enable clocks
[10971.067993] disable GPIO40 wakeup source
[10971.351806] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10972.346862] mmc1: Bus clock timer expired
[10972.347412] set GPIO40 as waketup source
[10972.348297] mmc1: Disable clocks
[10972.348876] mmc1: Enable clocks
[10972.349365] disable GPIO40 wakeup source
[10972.632049] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10973.626831] mmc1: Bus clock timer expired
[10973.627380] set GPIO40 as waketup source
[10973.628265] mmc1: Disable clocks
[10973.628814] mmc1: Enable clocks
[10973.629302] disable GPIO40 wakeup source
[10973.912048] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10974.906829] mmc1: Bus clock timer expired
[10974.907409] set GPIO40 as waketup source
[10974.908264] mmc1: Disable clocks
[10974.908813] mmc1: Enable clocks
[10974.909301] disable GPIO40 wakeup source
[10975.002075] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[10975.037597] ALS value: 0x0, level: 0 #
[10975.471588] sequans_xxx: waking up the card...
[10975.473937] sequans_xxx: wait for completion (timeout 800 msec)...
[10976.007354] sequans_xxx: card is waked up successfully
[10976.937622] ALS value: 0x3, level: 0 #
[10983.518035] ALS value: 0x8, level: 2 #
[10993.934906] batt: M2A_RPC: level_update: 94 at 10991188777180 (2012-02-14 00:04:41.873981095 UTC)
[10993.936096] batt: batt:power_supply_changed: battery
[10993.941680] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4041, batt_temp=377, batt_current=0, eval_current=358, level=94, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10991196528644 (2012-02-14 00:04:41.880755997 UTC)
[10993.944396] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4041, batt_temp=377, batt_current=0, eval_current=358, level=94, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 10991198878498 (2012-02-14 00:04:41.883502579 UTC)
[10993.951599]  at 10991204798908 (2012-02-14 00:04:41.875201798 UTC)
[11010.857299] sequans_xxx: card switched to IDLE state
[11010.882019] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11011.876800] mmc1: Bus clock timer expired
[11011.877746] set GPIO40 as waketup source
[11011.878265] mmc1: Disable clocks
[11011.878814] mmc1: Enable clocks
[11011.879302] disable GPIO40 wakeup source
[11011.912231] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11012.906829] mmc1: Bus clock timer expired
[11012.907745] set GPIO40 as waketup source
[11012.908264] mmc1: Disable clocks
[11012.908813] mmc1: Enable clocks
[11012.909301] disable GPIO40 wakeup source
[11012.932250] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11013.926910] mmc1: Bus clock timer expired
[11013.927825] set GPIO40 as waketup source
[11013.928344] mmc1: Disable clocks
[11013.928924] mmc1: Enable clocks
[11013.929779] disable GPIO40 wakeup source
[11013.962036] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11014.956848] mmc1: Bus clock timer expired
[11014.957763] set GPIO40 as waketup source
[11014.958282] mmc1: Disable clocks
[11014.958862] mmc1: Enable clocks
[11014.959716] disable GPIO40 wakeup source
[11014.982025] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11015.976806] mmc1: Bus clock timer expired
[11015.977752] set GPIO40 as waketup source
[11015.978271] mmc1: Disable clocks
[11015.978820] mmc1: Enable clocks
[11015.979675] disable GPIO40 wakeup source
[11016.012023] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11017.006774] mmc1: Bus clock timer expired
[11017.007354] set GPIO40 as waketup source
[11017.007873] mmc1: Disable clocks
[11017.008422] mmc1: Enable clocks
[11017.009307] disable GPIO40 wakeup source
[11017.032226] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11018.027008] mmc1: Bus clock timer expired
[11018.027557] set GPIO40 as waketup source
[11018.028076] mmc1: Disable clocks
[11018.028961] mmc1: Enable clocks
[11018.029479] disable GPIO40 wakeup source
[11018.062072] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11019.056854] mmc1: Bus clock timer expired
[11019.057434] set GPIO40 as waketup source
[11019.057952] mmc1: Disable clocks
[11019.058868] mmc1: Enable clocks
[11019.059356] disable GPIO40 wakeup source
[11019.082092] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11020.076873] mmc1: Bus clock timer expired
[11020.077423] set GPIO40 as waketup source
[11020.077941] mmc1: Disable clocks
[11020.078857] mmc1: Enable clocks
[11020.079345] disable GPIO40 wakeup source
[11020.112030] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11021.106842] mmc1: Bus clock timer expired
[11021.107421] set GPIO40 as waketup source
[11021.107940] mmc1: Disable clocks
[11021.108825] mmc1: Enable clocks
[11021.109313] disable GPIO40 wakeup source
[11021.272064] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11022.266906] mmc1: Bus clock timer expired
[11022.267089] set GPIO40 as waketup source
[11022.267364] mmc1: Disable clocks
[11022.267547] mmc1: Enable clocks
[11022.267700] disable GPIO40 wakeup source
[11022.552032] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11023.546875] mmc1: Bus clock timer expired
[11023.547424] set GPIO40 as waketup source
[11023.548339] mmc1: Disable clocks
[11023.548889] mmc1: Enable clocks
[11023.549377] disable GPIO40 wakeup source
[11023.832061] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11024.826843] mmc1: Bus clock timer expired
[11024.827423] set GPIO40 as waketup source
[11024.828308] mmc1: Disable clocks
[11024.828857] mmc1: Enable clocks
[11024.829376] disable GPIO40 wakeup source
[11025.112243] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11026.106933] mmc1: Bus clock timer expired
[11026.107513] set GPIO40 as waketup source
[11026.108428] mmc1: Disable clocks
[11026.109008] mmc1: Enable clocks
[11026.109497] disable GPIO40 wakeup source
[11026.392059] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11027.386840] mmc1: Bus clock timer expired
[11027.387390] set GPIO40 as waketup source
[11027.388275] mmc1: Disable clocks
[11027.388793] mmc1: Enable clocks
[11027.389312] disable GPIO40 wakeup source
[11027.482025] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11028.448333] set brightness = 156
[11028.464111] set brightness = 148
[11028.476776] mmc1: Bus clock timer expired
[11028.477294] set GPIO40 as waketup source
[11028.477844] mmc1: Disable clocks
[11028.478698] mmc1: Enable clocks
[11028.479187] disable GPIO40 wakeup source
[11028.480285] set brightness = 141
[11028.498168] set brightness = 133
[11028.512329] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11028.513671] set brightness = 126
[11028.529602] set brightness = 118
[11028.546417] set brightness = 110
[11028.562194] set brightness = 103
[11028.578704] set brightness = 95
[11028.594635] set brightness = 88
[11028.611572] set brightness = 80
[11028.628479] set brightness = 73
[11028.644805] set brightness = 65
[11028.661437] set brightness = 57
[11028.679687] set brightness = 50
[11028.694274] set brightness = 42
[11028.711517] set brightness = 35
[11028.728393] set brightness = 27
[11028.745025] set brightness = 20
[11029.506927] mmc1: Bus clock timer expired
[11029.507873] set GPIO40 as waketup source
[11029.508422] mmc1: Disable clocks
[11029.508941] mmc1: Enable clocks
[11029.509796] disable GPIO40 wakeup source
[11029.542022] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11030.536834] mmc1: Bus clock timer expired
[11030.537384] set GPIO40 as waketup source
[11030.537902] mmc1: Disable clocks
[11030.538452] mmc1: Enable clocks
[11030.539276] disable GPIO40 wakeup source
[11030.562255] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11031.556854] mmc1: Bus clock timer expired
[11031.557434] set GPIO40 as waketup source
[11031.557952] mmc1: Disable clocks
[11031.558868] mmc1: Enable clocks
[11031.559387] disable GPIO40 wakeup source
[11031.592010] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11032.586822] mmc1: Bus clock timer expired
[11032.587402] set GPIO40 as waketup source
[11032.587921] mmc1: Disable clocks
[11032.588806] mmc1: Enable clocks
[11032.589294] disable GPIO40 wakeup source
[11032.792022] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11033.786834] mmc1: Bus clock timer expired
[11033.787414] set GPIO40 as waketup source
[11033.787963] mmc1: Disable clocks
[11033.788879] mmc1: Enable clocks
[11033.789367] disable GPIO40 wakeup source
[11033.882049] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11034.876892] mmc1: Bus clock timer expired
[11034.877441] set GPIO40 as waketup source
[11034.877990] mmc1: Disable clocks
[11034.878906] mmc1: Enable clocks
[11034.879394] disable GPIO40 wakeup source
[11035.002105] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11035.996826] mmc1: Bus clock timer expired
[11035.997344] set GPIO40 as waketup source
[11035.998199] mmc1: Disable clocks
[11035.998687] mmc1: Enable clocks
[11035.999145] disable GPIO40 wakeup source
[11036.022094] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11036.033081] set brightness = 0
[11036.033996] request_suspend_state: sleep (0->3) at 11033287196371 (2012-02-14 00:05:23.973071673 UTC)
[11036.034912] [R] early_suspend start
[11036.035766] lightsensor_ioctl set value = 0
[11036.036560] lightsensor_disable
[11036.127349] __spi_bma150_set_mode: BMA get into SLEEP mode!
[11036.127868] bma150_early_suspend: spi_bma150_set_mode returned = 0!
[11036.146606] supersonic_panel_blank
[11036.147186] set brightness = 0
[11036.148681] [hdmi/fb]hdmifb_suspend, use_count=0
[11036.149169] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
[11036.149658] [hdmi/lcdc]lcdc_suspend
[11036.150421] [hdmi/tx]hdmi_panel_uninit
[11036.150878] [hdmi]suc_hdmi_gpio_off
[11036.152008] [hdmi/tx]suspending=true, disable timer
[11036.153015] [hdmi/tx]hdmi_panel_uninit
[11036.153503] [hdmi/tx]hdmi_standby
[11036.153930] [hdmi]hdmi_power(4)
[11036.154724] [hdmi/lcdc]lcdc_disable_video, blank_count=0
[11036.171356] __capella_cm3602_power: Turn the capella_cm3602 power off
[11036.172302] atmel_ts_suspend: enter
[11036.257965] __spi_bma150_set_mode: BMA get into SLEEP mode!
[11036.286895] mddi_epson_power: power off.
[11036.457580] set GPIO40 as waketup source
[11036.458129] mmc1: Disable clocks
[11036.458618] sequans_xxx: sqn_handle_android_early_suspend: enter
[11036.459167] sequans_xxx: sqn_handle_android_early_suspend: leave
[11036.460083] [R] early_suspend: sync
[11036.460632] mmc1: Enable clocks
[11036.461151] disable GPIO40 wakeup source
[11036.703826] [R] early_suspend end
[11036.962524] PM: Syncing filesystems ...
[11037.042053] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11037.183654] done.
[11037.184143] Freezing user space processes ... (elapsed 0.02 seconds) done.
[11037.208190] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[11037.243591] msmsdcc_suspend enter
[11037.244323] supersonic_sdslot_switchvdd: Disabling SD slot power
[11037.245574] msmsdcc_suspend leave
[11037.246032] msmsdcc_suspend enter
[11037.246490] mmc1: Disable clocks in msmsdcc_suspend
[11037.247344] msmsdcc_suspend leave
[11037.247802] msmsdcc_suspend enter
[11037.248291] msmsdcc_suspend leave
[11037.249481] PM: suspend of devices complete after 20.050 msecs
[11037.251037] PM: late suspend of devices complete after 1.037 msecs
[11037.251037] clocks on: uart_clk sdc_pclk sdc_clk
[11037.251037] [R] suspend end
[11037.251037] [R] resume start
[11037.251953] PM: early resume of devices complete after 1.068 msecs
[11037.253051] msmsdcc_resume enter
[11037.253784] msmsdcc_resume enter
[11037.254669] mmc1: Enable clocks
[11037.255157] msmsdcc_resume enter
[11037.263183] wakeup wake lock: SMD_RPCCALL
[11037.273742] PM: resume of devices complete after 20.843 msecs
[11037.275238] Restarting tasks ... done.
[11037.298553] suspend: exit suspend, ret = 0 (2012-02-14 00:05:27.525263708 UTC)
[11038.071289] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11038.259094] PM: Syncing filesystems ... done.
[11038.262573] Freezing user space processes ... (elapsed 0.03 seconds) done.
[11038.298248] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[11038.325439] pm_op(): platform_pm_suspend+0x0/0x5c returns -16
[11038.326629] PM: Device alarm failed to suspend: error -16
[11038.327178] PM: Some devices failed to suspend
[11038.328735] PM: resume of devices complete after 0.671 msecs
[11038.329956] Restarting tasks ... done.
[11038.351776] suspend: exit suspend, ret = -16 (2012-02-14 00:05:28.578022792 UTC)
[11039.066223] mmc1: Bus clock timer expired
[11039.066406] set GPIO40 as waketup source
[11039.066680] mmc1: Disable clocks
[11039.066864] mmc1: Enable clocks
[11039.067016] disable GPIO40 wakeup source
[11039.091644] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11039.401489] PM: Syncing filesystems ... done.
[11039.402801] Freezing user space processes ...
[11039.407348] Freezing of user space  aborted
[11039.408172]
[11039.408294] Restarting tasks ... done.
[11039.476623] suspend: exit suspend, ret = -16 (2012-02-14 00:05:29.702807809 UTC)
[11040.086303] mmc1: Bus clock timer expired
[11040.086608] set GPIO40 as waketup source
[11040.086761] mmc1: Disable clocks
[11040.087066] mmc1: Enable clocks
[11040.087341] disable GPIO40 wakeup source
[11040.090393] PM: Syncing filesystems ... done.
[11040.091613] Freezing user space processes ...
[11040.111450] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11040.112091] (elapsed 0.02 seconds) done.
[11040.112487] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[11040.140625] msmsdcc_suspend enter
[11040.140991] msmsdcc_suspend leave
[11040.141204] msmsdcc_suspend enter
[11040.141387] mmc1: Disable clocks in msmsdcc_suspend
[11040.141754] msmsdcc_suspend leave
[11040.141967] msmsdcc_suspend enter
[11040.142211] msmsdcc_suspend leave
[11040.142578] PM: suspend of devices complete after 14.465 msecs
[11040.143493] PM: late suspend of devices complete after 0.488 msecs
[11040.143493] clocks on: uart_clk sdc_pclk sdc_clk
[11040.143493] [R] suspend end
[11040.143493] [R] resume start
[11040.144104] PM: early resume of devices complete after 0.579 msecs
[11040.144714] wakeup wake lock: gpio_input
[11040.145294] msmsdcc_resume enter
[11040.145996] msmsdcc_resume enter
[11040.146270] mmc1: Enable clocks
[11040.146514] msmsdcc_resume enter
[11040.152008] PM: resume of devices complete after 6.805 msecs
[11040.152923] Restarting tasks ...
[11040.185180] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
[11040.187774] request_suspend_state: wakeup (3->0) at 11037441923465 (2012-02-14 00:05:58.535949526 UTC)
[11040.188873] lightsensor_ioctl set value = 1
[11040.189178] lightsensor_enable
[11040.189483] lightsensor_enable: microp is suspended
[11040.193298] set brightness = 10
[11040.207000] done.
[11040.207336] suspend: exit suspend, ret = 0 (2012-02-14 00:05:58.555508049 UTC)
[11040.207916] [R] late_resume start
[11040.208221] sequans_xxx: sqn_handle_android_late_resume: enter
[11040.208557] sequans_xxx: sqn_handle_android_late_resume: leave
[11040.209716] set brightness = 21
[11040.225524] set brightness = 32
[11040.241302] set brightness = 43
[11040.249572] sequans_xxx: waking up the card...
[11040.251800] sequans_xxx: wait for completion (timeout 800 msec)...
[11040.257934] set brightness = 54
[11040.273559] set brightness = 65
[11040.290222] set brightness = 76
[11040.306976] set brightness = 87
[11040.316040] mddi_wait_interrupt 2538, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
[11040.322753] set brightness = 98
[11040.338470] set brightness = 109
[11040.351593] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
[11040.355102] set brightness = 120
[11040.370849] set brightness = 131
[11040.386688] set brightness = 142
[11040.402496] set brightness = 153
[11040.406646] __spi_bma150_set_mode: BMA get into NORMAL mode!
[11040.416168] mddi_wait_interrupt 2538, timeout waiting for 20000, INT = 8, STAT = 8 gotint = a004
[11040.416473] mddi_epson_power: power on.
[11040.419189] set brightness = 164
[11040.732818] msmfb: ready, waiting for full update
[11040.738983] [CAM]ov8810_resume
[11040.739562] __capella_cm3602_power: Turn the capella_cm3602 power on
[11040.740478] [hdmi/fb]hdmifb_resume
[11040.740936] [hdmi/lcdc]lcdc_resume
[11040.741729] [hdmi/tx]hdmi_panel_init
[11040.742156] [hdmi]suc_hdmi_gpio_on
[11040.743316] [hdmi]hdmi_power(5)
[11040.743835] [R] late_resume end
[11040.746368] msmfb: pan_update in state(1)
[11040.746398] msmfb: full update starting
[11040.780029] Touch Status: 0x01
[11040.781219] msmfb: full update completed
[11040.782135] msmfb: turning on panel
[11040.782592] supersonic_panel_unblank
[11040.792968] turn on backlight
[11040.793609] set brightness = 164
[11040.795501] 0x10 0xEA 0xD8 0x09
[11040.799285] Touch Status: 0x01 0x00 0xEA 0xD8 0x09
[11041.046813] sequans_xxx: can't wake up the card - timeout elapsed
[11041.047393] sequans_xxx: retry wake up
[11041.050506] sequans_xxx: wait for completion (timeout 800 msec)...
[11041.117492] sequans_xxx: card is waked up successfully
[11041.146850] sequans_xxx: got RX data, card is not asleep
[11041.419769] sequans_xxx: waking up the card...
[11041.422088] sequans_xxx: wait for completion (timeout 800 msec)...
[11041.426879] sequans_xxx: card is waked up successfully
[11041.560485] S1@110,599
[11041.597778] ALS value: 0x14, level: 3 #
[11041.717803] ALS value: 0x14, level: 3 #
[11041.950256] E1@629,991
[11043.537384] ALS value: 0xB, level: 2 #
[11043.688446] check_calibration: calibration confirm
[11044.487335] ALS value: 0xD, level: 3 #
[11044.507110] sequans_xxx: got RX data, card is not asleep
[11044.527008] sequans_xxx: got RX data, card is not asleep
[11045.417541] ALS value: 0xCF, level: 5 #
[11046.357208] ALS value: 0x24, level: 3 #
[11047.297363] ALS value: 0x8F, level: 5 #
[11048.238311] ALS value: 0x33, level: 3 #
[11049.187500] ALS value: 0x97, level: 5 #
[11050.127655] ALS value: 0x34, level: 3 #
[11051.108489] ALS value: 0x81, level: 5 #
[11052.007324] ALS value: 0x16, level: 3 #
[11054.867309] ALS value: 0x52, level: 4 #
[11055.767303] ALS value: 0x16, level: 3 #
[11057.657440] ALS value: 0x63, level: 4 #
[11058.637298] ALS value: 0x16, level: 3 #
[11059.537384] ALS value: 0x0, level: 0 #
[11060.477233] ALS value: 0xA, level: 2 #
[11061.437225] ALS value: 0x2D, level: 3 #
[11063.297393] ALS value: 0x32, level: 3 #
[11064.247650] ALS value: 0x6, level: 1 #
[11065.207275] ALS value: 0x32, level: 3 #
[11065.681030] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
[11065.892425] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
[11066.422515] set brightness = 0
[11066.423431] request_suspend_state: sleep (0->3) at 11063676965060 (2012-02-14 00:06:24.770960604 UTC)
[11066.424377] [R] early_suspend start
[11066.425262] lightsensor_ioctl set value = 0
[11066.426055] lightsensor_disable
[11066.517028] __spi_bma150_set_mode: BMA get into SLEEP mode!
[11066.517517] bma150_early_suspend: spi_bma150_set_mode returned = 0!
[11066.536163] supersonic_panel_blank
[11066.536895] set brightness = 0
[11066.544494] [hdmi/fb]hdmifb_suspend, use_count=0
[11066.545318] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
[11066.545806] [hdmi/lcdc]lcdc_suspend
[11066.557708] [hdmi/tx]hdmi_panel_uninit
[11066.558166] [hdmi]suc_hdmi_gpio_off
[11066.559326] [hdmi/tx]suspending=true, disable timer
[11066.560119] [hdmi/tx]hdmi_panel_uninit
[11066.560577] [hdmi/tx]hdmi_standby
[11066.561004] [hdmi]hdmi_power(4)
[11066.561767] [hdmi/lcdc]lcdc_disable_video, blank_count=0
[11066.562316] __capella_cm3602_power: Turn the capella_cm3602 power off
[11066.563232] atmel_ts_suspend: enter
[11066.657348] __spi_bma150_set_mode: BMA get into SLEEP mode!
[11066.696563] mddi_epson_power: power off.
[11066.866912] set GPIO40 as waketup source
[11066.867126] mmc1: Disable clocks
[11066.867279] sequans_xxx: sqn_handle_android_early_suspend: enter
[11066.867553] sequans_xxx: sqn_handle_android_early_suspend: leave
[11066.867736] [R] early_suspend: sync
[11066.876586] mmc1: Enable clocks
[11066.876770] disable GPIO40 wakeup source
[11067.006042] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
[11067.011444] [R] early_suspend end
[11067.030395] request_suspend_state: wakeup (3->0) at 11064283929171 (2012-02-14 00:06:25.377955232 UTC)
[11067.030761] [R] late_resume start
[11067.030914] sequans_xxx: sqn_handle_android_late_resume: enter
[11067.031188] sequans_xxx: sqn_handle_android_late_resume: leave
[11067.031646] lightsensor_ioctl set value = 1
[11067.031921] lightsensor_enable
[11067.032043] lightsensor_enable: microp is suspended
[11067.033630] set brightness = 10
[11067.049377] set brightness = 21
[11067.065368] set brightness = 32
[11067.081207] set brightness = 43
[11067.098175] __spi_bma150_set_mode: BMA get into NORMAL mode!
[11067.098785] set brightness = 54
[11067.115509] set brightness = 65
[11067.126617] mddi_wait_interrupt 2818, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
[11067.131317] set brightness = 76
[11067.147308] set brightness = 87
[11067.163085] set brightness = 98
[11067.179809] set brightness = 109
[11067.197082] set brightness = 120
[11067.212402] set brightness = 131
[11067.216339] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
[11067.226715] mddi_wait_interrupt 2818, timeout waiting for 20000, INT = 8, STAT = 8 gotint = a004
[11067.227203] mddi_epson_power: power on.
[11067.229431] set brightness = 142
[11067.245788] set brightness = 153
[11067.262695] set brightness = 164
[11067.543212] msmfb: ready, waiting for full update
[11067.549377] [CAM]ov8810_resume
[11067.549926] __capella_cm3602_power: Turn the capella_cm3602 power on
[11067.550903] [hdmi/fb]hdmifb_resume
[11067.551330] [hdmi/lcdc]lcdc_resume
[11067.551788] [hdmi/tx]hdmi_panel_init
[11067.552581] [hdmi]suc_hdmi_gpio_on
[11067.553710] [hdmi]hdmi_power(5)
[11067.555114] [R] late_resume end
[11067.556945] msmfb: pan_update in state(1)
[11067.556976] msmfb: full update starting
[11067.560455] Touch Status: 0x01 0x10 0xEA 0xD8 0x09
[11067.565277] Touch Status: 0x01 0x00 0xEA 0xD8 0x09
[11067.591461] msmfb: full update completed
[11067.592010] msmfb: turning on panel
[11067.592803] supersonic_panel_unblank
[11067.593231] turn on backlight
[11067.593658] set brightness = 164
[11068.297332] S1@156,660
[11068.407287] ALS value: 0x2A, level: 3 #
[11068.488616] ALS value: 0x2A, level: 3 #
[11068.641448] E1@579,991
[11069.805175] check_calibration: calibration confirm
[11071.103851] sequans_xxx: tx_queue len 0, enabling netif_queue
[11071.236907] sequans_xxx: WiMAX carrier LOST [ignored]
[11071.237548] sequans_xxx: WiMAX carrier LOST [ignored]
[11071.287200] ALS value: 0x0, level: 0 #
[11071.426849] sequans_xxx: card switched to REENTRY state
[11071.461730] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11072.227447] ALS value: 0x6, level: 1 #
[11072.456512] mmc1: Bus clock timer expired
[11072.457061] set GPIO40 as waketup source
[11072.457977] mmc1: Disable clocks
[11072.458496] mmc1: Enable clocks
[11072.459014] disable GPIO40 wakeup source
[11072.491699] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11073.207214] ALS value: 0xD, level: 3 #
[11073.486511] mmc1: Bus clock timer expired
[11073.486785] set GPIO40 as waketup source
[11073.486968] mmc1: Disable clocks
[11073.487121] mmc1: Enable clocks
[11073.487396] disable GPIO40 wakeup source
[11073.521575] mmc1:0001: error -110 reading SDIO_CCCR_INTx
[11074.107299] ALS value: 0x0, level: 0 #
[11074.147460] Disabling lock debugging due to kernel taint
[11074.154876] sequans_xxx: free GPIO40 interrupt
[11074.157836] sequans_xxx: KTHP cleaned up
[11074.158050] sequans_xxx: wait until RX is finished
[11074.166656] sequans_xxx: wait until TX is finished
[11074.167053] sequans_xxx: card removed successfuly
[11074.167327] sequans_xxx: Driver has been removed
[11074.167602] mmc_wimax_set_carddetect: 0
[11074.167755] mmc1: card_present 0
[11074.167907] supersonic_wimax_status
[11074.168182] mmc1: Slot status change detected (1 -> 0)
[11074.168334] mmc_wimax_power
[11074.193420] mmc_wimax_set_status on:0
[11074.252868] Unable to handle kernel paging request at virtual address bf007714
[11074.253082] pgd = c2c90000
[11074.253234] [bf007714] *pgd=3727a051, *pte=00000000, *ppte=00000000
[11074.253875] Internal error: Oops: 27 [#1] PREEMPT
[11074.254028] last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state
[11074.254364] Modules linked in: [last unloaded: sequans_sdio]
[11074.254852] CPU: 0    Tainted: G  R     W    (2.6.37.6-cyanogenmod-01509-g8913be8 #1)
[11074.255065] PC is at do_select+0x2e0/0x4c0
[11074.255340] LR is at do_select+0x2cc/0x4c0
[11074.258758] pc : [<c00e1a98>]    lr : [<c00e1a84>]    psr: a0000013
[11074.258758] sp : c157db20  ip : 00000002  fp : c157de14
[11074.270202] r10: 0000000b  r9 : 00000000  r8 : c8eebe20
[11074.275512] r7 : 00000000  r6 : 00000000  r5 : 00000000  r4 : 00000800
[11074.281921] r3 : bf0076f8  r2 : 00000000  r1 : c157dde4  r0 : c8eebe20
[11074.288543] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[11074.295562] Control: 10c5787d  Table: 22c90019  DAC: 00000015
[11074.301361]
[11074.301391] PC: 0xc00e1a18:
[11074.305541] 1a18  e50bc2c8 e50b32bc e7911008 e1813003 e50b12b8 e7922008 e1933002 e50b32d0
[11074.313690] 1a38  e50b22b4 051ba2c8 0a000059 e3a05000 e3a04001 e1a09005 e50b52ac e50b82f0
[11074.321838] 1a58  ea000003 e51b32a0 e15a0003 0a000044 e1a04084 e51bc2d0 e114000c 0a00003c
[11074.330017] 1a78  e1a0000a e24b1030 ebffc1d4 e2508000 0a000037 e5983010 e3530000 0a000015
[11074.338165] 1a98  e593201c e3520000 0a000012 e3560000 0a00000a e51b12bc e3a02002 e5862004
[11074.346313] 1ab8  e1140001 13a0c0db 1586c004 e51b12b8 e1140001 15962004 13822fc3 15862004
[11074.354522] 1ad8  e1a00008 e1a01006 e1a0e00f e593f01c e1a03000 ea000000 e3003145 e51b2030
[11074.362640] 1af8  e3520000 0a000003 e1a00008 e50b32f4 ebffc325 e51b32f4 e31300d9 0a000004
[11074.370819]
[11074.370819] LR: 0xc00e1a04:
[11074.375061] 1a04  e51b32dc e28ac020 e51b12d8 e51b22d4 e7933008 e50bc2c8 e50b32bc e7911008
[11074.383209] 1a24  e1813003 e50b12b8 e7922008 e1933002 e50b32d0 e50b22b4 051ba2c8 0a000059
[11074.391387] 1a44  e3a05000 e3a04001 e1a09005 e50b52ac e50b82f0 ea000003 e51b32a0 e15a0003
[11074.399566] 1a64  0a000044 e1a04084 e51bc2d0 e114000c 0a00003c e1a0000a e24b1030 ebffc1d4
[11074.407684] 1a84  e2508000 0a000037 e5983010 e3530000 0a000015 e593201c e3520000 0a000012
[11074.415863] 1aa4  e3560000 0a00000a e51b12bc e3a02002 e5862004 e1140001 13a0c0db 1586c004
[11074.424011] 1ac4  e51b12b8 e1140001 15962004 13822fc3 15862004 e1a00008 e1a01006 e1a0e00f
[11074.432159] 1ae4  e593f01c e1a03000 ea000000 e3003145 e51b2030 e3520000 0a000003 e1a00008
[11074.440338]
[11074.440338] SP: 0xc157daa0:
[11074.444671] daa0  c0085134 c04e5aa8 00000000 00000a10 c00861c4 6e6b6e55 ffffffff c157db0c
[11074.452758] dac0  00000000 00000000 c157de14 c157dad8 c00309ec c002b2b8 c8eebe20 c157dde4
[11074.460906] dae0  00000000 bf0076f8 00000800 00000000 00000000 00000000 c8eebe20 00000000
[11074.469055] db00  0000000b c157de14 00000002 c157db20 c00e1a84 c00e1a98 a0000013 ffffffff
[11074.477233] db20  00000000 00000000 c157df18 c157de24 c157de28 c157de2c c157de18 c157de1c
[11074.485382] db40  c157de20 00000800 c157df70 00000020 00000001 00030d40 00000800 00000000
[11074.493530] db60  00000000 c157c000 00000000 c157ddd8 00000001 0000000c c157dbac c00e0e98
[11074.501708] db80  000000db 00000000 ce0ac000 00000000 00000000 00000001 c8eebe20 000000db
[11074.509857]
[11074.509857] FP: 0xc157dd94:
[11074.514221] dd94  b9ca6a3c 00000000 00000000 c157ddd4 c157ddb0 c005f5e0 c2094830 ce0ac000
[11074.522277] ddb4  00000000 ce0ac030 00000000 c2094830 ce0ac000 c157de0c c157ddd8 c005f9a8
[11074.530426] ddd4  c005c0c8 1e294fda 00002b3f c157de0c 00000001 c03d4e14 40bd9e08 00000004
[11074.538604] ddf4  c157de18 00000000 0000000c 00000000 00000000 c157df54 c157de18 c00e1ee4
[11074.546752] de14  c00e17c4 00000800 00000000 00000000 00000000 00000000 00000000 cc77fe4c
[11074.554901] de34  00000001 c05873c8 c157c000 c157de5c c157de50 c0062358 c00621e0 c157de7c
[11074.563079] de54  c157de60 c0090bc4 c0062350 c05873bc ffffffff c05873bc ffffffff c157deb4
[11074.571197] de74  c157de80 c0090d34 c009056c ffffffff 001a7000 ce2900e0 0000030c 001a730c
[11074.579376]
[11074.579406] R0: 0xc8eebda0:
[11074.583648] bda0  ce24cb40 c00d2758 00000000 00000000 c03db1b4 00000000 00020001 0000001e
[11074.591796] bdc0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 dbbc6de0
[11074.600006] bde0  00000000 00000000 00000000 00000020 00000000 00000000 ffffffff ffffffff
[11074.608123] be00  00000000 00000000 00000000 c8eebe0c c8eebe0c db785130 00000000 00000000
[11074.616271] be20  ce2feba0 cc5630c0 db80a300 db680ab8 bf0076f8 00000003 00020002 0000001f
[11074.624450] be40  00000000 00000000 00000000 00000000 00000000 00000000 00000000 cb881480
[11074.632598] be60  00000000 00000000 00000000 00000000 00000000 00000000 ffffffff ffffffff
[11074.640747] be80  00000000 00000000 00000000 c8eebe8c c8eebe8c cc410f38 00000000 00000000
[11074.648925]
[11074.648925] R1: 0xc157dd64:
[11074.653167] dd64  ffffffff 00000000 00000000 53c13cf0 00000509 c157ddac c157dd88 c005ced4
[11074.661315] dd84  c01da8f0 c2094830 c04e3bc0 ffb42bf6 b9ca6a3c 00000000 00000000 c157ddd4
[11074.669494] dda4  c157ddb0 c005f5e0 c2094830 ce0ac000 00000000 ce0ac030 00000000 c2094830
[11074.677642] ddc4  ce0ac000 c157de0c c157ddd8 c005f9a8 c005c0c8 1e294fda 00002b3f c157de0c
[11074.685821] dde4  00000001 c03d4e14 40bd9e08 00000004 c157de18 00000000 0000000c 00000000
[11074.693969] de04  00000000 c157df54 c157de18 c00e1ee4 c00e17c4 00000800 00000000 00000000
[11074.702117] de24  00000000 00000000 00000000 cc77fe4c 00000001 c05873c8 c157c000 c157de5c
[11074.710296] de44  c157de50 c0062358 c00621e0 c157de7c c157de60 c0090bc4 c0062350 c05873bc
[11074.718444]
[11074.718444] R8: 0xc8eebda0:
[11074.722717] bda0  ce24cb40 c00d2758 00000000 00000000 c03db1b4 00000000 00020001 0000001e
[11074.730865] bdc0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 dbbc6de0
[11074.739013] bde0  00000000 00000000 00000000 00000020 00000000 00000000 ffffffff ffffffff
[11074.747192] be00  00000000 00000000 00000000 c8eebe0c c8eebe0c db785130 00000000 00000000
[11074.755340] be20  ce2feba0 cc5630c0 db80a300 db680ab8 bf0076f8 00000003 00020002 0000001f
[11074.763488] be40  00000000 00000000 00000000 00000000 00000000 00000000 00000000 cb881480
[11074.771667] be60  00000000 00000000 00000000 00000000 00000000 00000000 ffffffff ffffffff
[11074.779846] be80  00000000 00000000 00000000 c8eebe8c c8eebe8c cc410f38 00000000 00000000
[11074.787994] Process Unknown (pid: 2576, stack limit = 0xc157c2f0)
[11074.794158] Stack: (0xc157db20 to 0xc157e000)
[11074.798400] db20: 00000000 00000000 c157df18 c157de24 c157de28 c157de2c c157de18 c157de1c
[11074.806671] db40: c157de20 00000800 c157df70 00000020 00000001 00030d40 00000800 00000000
[11074.814819] db60: 00000000 c157c000 00000000 c157ddd8 00000001 0000000c c157dbac c00e0e98
[11074.822875] db80: 000000db 00000000 ce0ac000 00000000 00000000 00000001 c8eebe20 000000db
[11074.831146] dba0: 00000000 c157db7c c00e0f80 bf0076f0 bf0076f0 bf0076f0 f65777f7 000004f3
[11074.839294] dbc0: c157dbf4 c157dbd0 c005ced4 c01da8f0 000165a1 00000000 ce0ac000 c04e3bc0
[11074.847473] dbe0: c157dc34 c157dbf0 00000000 00000000 00000000 00000000 bb3ce39d 000004f9
[11074.855529] dc00: c157dc34 c157dc10 c005ced4 c01da8f0 d5f75030 c04e3bc0 00000000 f014c4d1
[11074.863769] dc20: 00000000 00000000 c157dc5c c157dc38 c005f5e0 d5f75030 c04d85f8 00000000
[11074.871948] dc40: c157dce0 c057a360 001efc70 00002b3b 0002540c 00000000 ce0ac000 c04e3bc0
[11074.880004] dc60: c157dcb4 c157dc70 c005f0b8 c005e970 c157dc94 b9c36e18 0049f734 00000000
[11074.888244] dc80: ffb608cc ffffffff c157dcd4 ce0ac030 c04e3bc0 00000001 00000000 a530aa54
[11074.896423] dca0: 000004c4 c04d85f0 c157dcec c157dcb8 c005f134 c005ef4c 0049f734 00000000
[11074.904571] dcc0: 00000000 ce0ac030 00000001 c04e3bc0 00000000 00000000 fffffffe c04d8094
[11074.912628] dce0: 00000002 ce2900e0 c157dd1c c157dcf8 c0086f94 c003578c c157c000 ce0ac000
[11074.920898] dd00: 00000015 d70dc400 db1beb00 c04d85f0 c157dd3c c157dd20 c00875b0 c0086f6c
[11074.929046] dd20: 00000000 00000000 d5f3e01c ce0ac000 c157dd54 c157dd40 c00875fc c0087588
[11074.937225] dd40: ce0ac000 c04e3b78 0000ee6c d70dc438 c157dd84 c157dd60 c01da9ec c01da7fc
[11074.945281] dd60: ffb42bf6 ffffffff 00000000 00000000 53c13cf0 00000509 c157ddac c157dd88
[11074.953521] dd80: c005ced4 c01da8f0 c2094830 c04e3bc0 ffb42bf6 b9ca6a3c 00000000 00000000
[11074.961700] dda0: c157ddd4 c157ddb0 c005f5e0 c2094830 ce0ac000 00000000 ce0ac030 00000000
[11074.969757] ddc0: c2094830 ce0ac000 c157de0c c157ddd8 c005f9a8 c005c0c8 1e294fda 00002b3f
[11074.977996] dde0: c157de0c 00000001 c03d4e14 40bd9e08 00000004 c157de18 00000000 0000000c
[11074.986175] de00: 00000000 00000000 c157df54 c157de18 c00e1ee4 c00e17c4 00000800 00000000
[11074.994323] de20: 00000000 00000000 00000000 00000000 cc77fe4c 00000001 c05873c8 c157c000
[11075.002380] de40: c157de5c c157de50 c0062358 c00621e0 c157de7c c157de60 c0090bc4 c0062350
[11075.010650] de60: c05873bc ffffffff c05873bc ffffffff c157deb4 c157de80 c0090d34 c009056c
[11075.018798] de80: ffffffff 001a7000 ce2900e0 0000030c 001a730c 001a730c 001a730c 00000000
[11075.026977] dea0: c04d85f8 00000000 c157decc c157deb8 c0039950 c0039880 b0c685b6 c057a360
[11075.035034] dec0: c157df1c c157ded0 c008ae10 c006bf98 59751ff5 00000000 c157df44 360010b3
[11075.043273] dee0: ffffffff 00000000 000000f9 00000000 00002b3f 123d8dda c157df70 0bebc200
[11075.051452] df00: c157df28 00000000 c157df54 c157df20 c00e0d78 c006c2f8 c157de18 c157de1c
[11075.059509] df20: c157de20 c157de24 c157de28 c157de2c 40bd9e88 00000000 40bd9e08 00000000
[11075.067749] df40: c157df70 00030d40 c157dfa4 c157df58 c00e22b4 c00e1c84 c157df70 001a730c
[11075.075927] df60: 1ddc4173 0000000c 00000000 00030d40 00002b3f 1e294fda 00000008 40bd9e88
[11075.084075] df80: 000005ee 00000800 0000008e c0031044 c157c000 00000000 00000000 c157dfa8
[11075.092132] dfa0: c0030ec0 c00e21dc 40bd9e88 000005ee 0000000c 40bd9e08 00000000 00000000
[11075.100402] dfc0: 40bd9e88 000005ee 00000800 0000008e 40ada000 000b68bd 00100000 00000001
[11075.108551] dfe0: 40bd9e00 40bd9df0 00069e0f afd0ba64 00000010 0000000c 00000000 00000000
[11075.116699] Backtrace:
[11075.119049] [<c00e17b8>] (do_select+0x0/0x4c0) from [<c00e1ee4>] (core_sys_select+0x26c/0x324)
[11075.127746] [<c00e1c78>] (core_sys_select+0x0/0x324) from [<c00e22b4>] (sys_select+0xe4/0x104)
[11075.136230] [<c00e21d0>] (sys_select+0x0/0x104) from [<c0030ec0>] (ret_fast_syscall+0x0/0x30)
[11075.144836] Code: 0a000037 e5983010 e3530000 0a000015 (e593201c)
[11075.152709] mmc1: card 0001 removed
[11075.193511] ---[ end trace dec6997083161637 ]---
[11075.193695] Kernel panic - not syncing: Fatal exception
[11075.193969] Backtrace:
[11075.194244] [<c0034bb4>] (dump_backtrace+0x0/0x110) from [<c03cfcb0>] (dump_stack+0x18/0x1c)
[11075.194580]  r7:c00e1a9c r6:00000001 r5:c04e414c r4:c0558330
[11075.195220] [<c03cfc98>] (dump_stack+0x0/0x1c) from [<c03cfd30>] (panic+0x7c/0x198)
[11075.195556] [<c03cfcb4>] (panic+0x0/0x198) from [<c0034f8c>] (die+0x2c8/0x318)
[11075.195861]  r3:00000001 r2:c157d958 r1:00000000 r0:c0469ace
[11075.201080] [<c0034cc4>] (die+0x0/0x318) from [<c003667c>] (__do_kernel_fault+0x6c/0x8c)
[11075.209289] [<c0036610>] (__do_kernel_fault+0x0/0x8c) from [<c0036858>] (do_page_fault+0x1bc/0x1d4)
[11075.218292]  r9:ce290114 r8:ce2900e0 r7:bf007714 r6:00010000 r5:c157dad8
[11075.224670] r4:ce0ac000
[11075.227294] [<c003669c>] (do_page_fault+0x0/0x1d4) from [<c002b2e8>] (do_DataAbort+0x3c/0xa0)
[11075.235931] [<c002b2ac>] (do_DataAbort+0x0/0xa0) from [<c00309ec>] (__dabt_svc+0x4c/0x60)
[11075.244079] Exception stack(0xc157dad8 to 0xc157db20)
[11075.248992] dac0:                                                       c8eebe20 c157dde4
[11075.257263] dae0: 00000000 bf0076f8 00000800 00000000 00000000 00000000 c8eebe20 00000000
[11075.265411] db00: 0000000b c157de14 00000002 c157db20 c00e1a84 c00e1a98 a0000013 ffffffff
[11075.273498]  r7:00000000 r6:00000000 r5:c157db0c r4:ffffffff
[11075.279113] [<c00e17b8>] (do_select+0x0/0x4c0) from [<c00e1ee4>] (core_sys_select+0x26c/0x324)
[11075.287841] [<c00e1c78>] (core_sys_select+0x0/0x324) from [<c00e22b4>] (sys_select+0xe4/0x104)
[11075.296295] [<c00e21d0>] (sys_select+0x0/0x104) from [<c0030ec0>] (ret_fast_syscall+0x0/0x30)
[11075.304809] Rebooting in 5 seconds..
[11076.186828] mmc1: Bus clock timer expired
[11076.187103] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
[11076.187286] mmc1: Disable clocks
[11080.293823]
[11080.293975] Restarting Linux version 2.6.37.6-cyanogenmod-01509-g8913be8 (shade@toxygene) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Wed Jul 27 21:34:30 EDT 2011
[11080.293975]

No errors detected