- $ dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
- [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000009fff0000 (usable)
- [ 0.000000] BIOS-e820: 000000009fff0000 - 000000009fff3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000009fff3000 - 00000000a0000000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] DMI 2.3 present.
- [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0x9fff0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-C7FFF write-protect
- [ 0.000000] C8000-FFFFF uncachable
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
- [ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] initial memory mapped : 0 - 01800000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037000000 page 2M
- [ 0.000000] 0037000000 - 00373fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
- [ 0.000000] RAMDISK: 37879000 - 37fefe45
- [ 0.000000] Allocated new RAMDISK: 00100000 - 00876e45
- [ 0.000000] Move RAMDISK from 0000000037879000 - 0000000037fefe44 to 00100000 - 00876e44
- [ 0.000000] ACPI: RSDP 000f9260 00014 (v00 Nvidia)
- [ 0.000000] ACPI: RSDT 9fff3040 00030 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: FACP 9fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: DSDT 9fff3180 063C4 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
- [ 0.000000] ACPI: FACS 9fff0000 00040
- [ 0.000000] ACPI: MCFG 9fff9680 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: APIC 9fff95c0 00072 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 1675MB HIGHMEM available.
- [ 0.000000] 883MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 373fe000
- [ 0.000000] low ram: 0 - 373fe000
- [ 0.000000] node 0 low ram: 00000000 - 373fe000
- [ 0.000000] node 0 bootmap 00012000 - 00018e80
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0001000000 - 00014c3154] TEXT DATA BSS ==> [0001000000 - 00014c3154]
- [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
- [ 0.000000] #5 [00014c4000 - 00014ca0ae] BRK ==> [00014c4000 - 00014ca0ae]
- [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
- [ 0.000000] #7 [0000100000 - 0000876e45] NEW RAMDISK ==> [0000100000 - 0000876e45]
- [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
- [ 0.000000] found SMP MP-table at [c00f5380] f5380
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000373fe
- [ 0.000000] HighMem 0x000373fe -> 0x0009fff0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x0009fff0
- [ 0.000000] On node 0 totalpages: 655231
- [ 0.000000] free_area_init_node: node 0, pgdat c13ae680, node_mem_map c14cc200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1736 pages used for memmap
- [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 3352 pages used for memmap
- [ 0.000000] HighMem zone: 425690 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
- [ 0.000000] If you got timer trouble try acpi_use_timer_override
- [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] ACPI: IRQ14 used by override.
- [ 0.000000] ACPI: IRQ15 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s34136 r0 d23208 u2097152
- [ 0.000000] pcpu-alloc: s34136 r0 d23208 u2097152 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 650111
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=fe4a1af1-1979-49fb-9668-314a24b12890 ro quiet
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (000373fe:0009fff0)
- [ 0.000000] Memory: 2586012k/2621376k available (2490k kernel code, 34008k reserved, 1318k data, 372k init, 1716168k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
- [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
- [ 0.000000] .init : 0xc13b9000 - 0xc1416000 ( 372 kB)
- [ 0.000000] .data : 0xc126e965 - 0xc13b81e0 (1318 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc126e965 (2490 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:1280
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2411.060 MHz processor.
- [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4822.12 BogoMIPS (lpj=9644240)
- [ 0.004029] Security Framework initialized
- [ 0.004040] SELinux: Disabled at boot.
- [ 0.004049] Mount-cache hash table entries: 512
- [ 0.004231] Initializing cgroup subsys ns
- [ 0.004235] Initializing cgroup subsys cpuacct
- [ 0.004239] Initializing cgroup subsys devices
- [ 0.004242] Initializing cgroup subsys freezer
- [ 0.004244] Initializing cgroup subsys net_cls
- [ 0.004270] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.004272] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.004274] CPU: Physical Processor ID: 0
- [ 0.004276] CPU: Processor Core ID: 0
- [ 0.004280] mce: CPU supports 5 MCE banks
- [ 0.004307] Performance Events: AMD PMU driver.
- [ 0.004314] ... version: 0
- [ 0.004315] ... bit width: 48
- [ 0.004317] ... generic registers: 4
- [ 0.004319] ... value mask: 0000ffffffffffff
- [ 0.004320] ... max period: 00007fffffffffff
- [ 0.004322] ... fixed-purpose events: 0
- [ 0.004323] ... event mask: 000000000000000f
- [ 0.004328] Checking 'hlt' instruction... OK.
- [ 0.021022] ACPI: Core revision 20090903
- [ 0.032093] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.032582] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
- [ 0.073015] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01
- [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.008000] Initializing CPU#1
- [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 1
- [ 0.160084] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01
- [ 0.160219] Brought up 2 CPUs
- [ 0.160223] Total of 2 processors activated (9644.66 BogoMIPS).
- [ 0.160405] CPU0 attaching sched-domain:
- [ 0.160408] domain 0: span 0-1 level MC
- [ 0.160411] groups: 0 1
- [ 0.160416] CPU1 attaching sched-domain:
- [ 0.160418] domain 0: span 0-1 level MC
- [ 0.160420] groups: 1 0
- [ 0.160503] devtmpfs: initialized
- [ 0.160503] regulator: core version 0.5
- [ 0.160503] NET: Registered protocol family 16
- [ 0.160503] ACPI: bus type pci registered
- [ 0.160503] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.160503] PCI: MCFG area at e0000000 reserved in E820
- [ 0.160503] PCI: Using MMCONFIG for extended config space
- [ 0.160503] PCI: Using configuration type 1 for base access
- [ 0.160516] bio: create slab <bio-0> at 0
- [ 0.160677] ACPI: EC: Look up EC in DSDT
- [ 0.169161] ACPI: Interpreter enabled
- [ 0.169173] ACPI: (supports S0 S1 S4 S5)
- [ 0.169194] ACPI: Using IOAPIC for interrupt routing
- [ 0.175879] ACPI: No dock devices found.
- [ 0.176787] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.176886] HPET not enabled in BIOS. You might try hpet=force boot option
- [ 0.176903] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc1f]
- [ 0.176911] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f]
- [ 0.176915] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f]
- [ 0.176925] pci 0000:00:01.1: PME# supported from D3hot D3cold
- [ 0.176928] pci 0000:00:01.1: PME# disabled
- [ 0.176947] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
- [ 0.176963] pci 0000:00:02.0: supports D1 D2
- [ 0.176965] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.176968] pci 0000:00:02.0: PME# disabled
- [ 0.176985] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
- [ 0.177004] pci 0000:00:02.1: supports D1 D2
- [ 0.177006] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177009] pci 0000:00:02.1: PME# disabled
- [ 0.177029] pci 0000:00:04.0: reg 10 io port: [0xf000-0xf0ff]
- [ 0.177033] pci 0000:00:04.0: reg 14 io port: [0xec00-0xecff]
- [ 0.177037] pci 0000:00:04.0: reg 18 32bit mmio: [0xfe02d000-0xfe02dfff]
- [ 0.177050] pci 0000:00:04.0: supports D1 D2
- [ 0.177070] pci 0000:00:06.0: reg 20 io port: [0xe000-0xe00f]
- [ 0.177091] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7]
- [ 0.177095] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3]
- [ 0.177099] pci 0000:00:07.0: reg 18 io port: [0x970-0x977]
- [ 0.177102] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73]
- [ 0.177106] pci 0000:00:07.0: reg 20 io port: [0xcc00-0xcc0f]
- [ 0.177110] pci 0000:00:07.0: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff]
- [ 0.177130] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7]
- [ 0.177134] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3]
- [ 0.177138] pci 0000:00:08.0: reg 18 io port: [0x960-0x967]
- [ 0.177142] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63]
- [ 0.177146] pci 0000:00:08.0: reg 20 io port: [0xb800-0xb80f]
- [ 0.177150] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02a000-0xfe02afff]
- [ 0.177181] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe029000-0xfe029fff]
- [ 0.177185] pci 0000:00:0a.0: reg 14 io port: [0xb400-0xb407]
- [ 0.177200] pci 0000:00:0a.0: supports D1 D2
- [ 0.177202] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177205] pci 0000:00:0a.0: PME# disabled
- [ 0.177235] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177237] pci 0000:00:0b.0: PME# disabled
- [ 0.177268] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177270] pci 0000:00:0c.0: PME# disabled
- [ 0.177299] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177302] pci 0000:00:0d.0: PME# disabled
- [ 0.177334] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177337] pci 0000:00:0e.0: PME# disabled
- [ 0.177435] pci 0000:01:09.0: reg 10 32bit mmio: [0xfdeff000-0xfdefffff]
- [ 0.177439] pci 0000:01:09.0: reg 14 io port: [0xac00-0xac3f]
- [ 0.177444] pci 0000:01:09.0: reg 18 32bit mmio: [0xfdd00000-0xfddfffff]
- [ 0.177456] pci 0000:01:09.0: reg 30 32bit mmio pref: [0x000000-0x0fffff]
- [ 0.177467] pci 0000:01:09.0: supports D1 D2
- [ 0.177469] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.177473] pci 0000:01:09.0: PME# disabled
- [ 0.177495] pci 0000:00:09.0: transparent bridge
- [ 0.177498] pci 0000:00:09.0: bridge io port: [0xa000-0xafff]
- [ 0.177501] pci 0000:00:09.0: bridge 32bit mmio: [0xfdc00000-0xfdefffff]
- [ 0.177505] pci 0000:00:09.0: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff]
- [ 0.177534] pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff]
- [ 0.177536] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
- [ 0.177540] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
- [ 0.177569] pci 0000:00:0c.0: bridge io port: [0x8000-0x8fff]
- [ 0.177571] pci 0000:00:0c.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
- [ 0.177575] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff]
- [ 0.177603] pci 0000:00:0d.0: bridge io port: [0x7000-0x7fff]
- [ 0.177607] pci 0000:00:0d.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
- [ 0.177610] pci 0000:00:0d.0: bridge 64bit mmio pref: [0xfd600000-0xfd6fffff]
- [ 0.177634] pci 0000:05:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
- [ 0.177642] pci 0000:05:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.177649] pci 0000:05:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
- [ 0.177654] pci 0000:05:00.0: reg 24 io port: [0x6c00-0x6c7f]
- [ 0.177659] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
- [ 0.184057] pci 0000:00:0e.0: bridge io port: [0x6000-0x6fff]
- [ 0.184061] pci 0000:00:0e.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
- [ 0.184065] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.184078] pci_bus 0000:00: on NUMA node 0
- [ 0.184097] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.184375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- [ 0.237421] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.237557] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.237694] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 *7 9 10 11 12 14 15)
- [ 0.237829] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
- [ 0.237963] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.238098] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 *7 9 10 11 12 14 15)
- [ 0.238232] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.238367] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
- [ 0.238502] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
- [ 0.238636] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
- [ 0.238771] ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
- [ 0.238906] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
- [ 0.239039] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.239184] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
- [ 0.239327] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
- [ 0.239469] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [ 0.239626] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
- [ 0.239776] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
- [ 0.239925] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
- [ 0.240082] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
- [ 0.240176] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
- [ 0.240338] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
- [ 0.240493] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
- [ 0.240648] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
- [ 0.240802] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
- [ 0.240962] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
- [ 0.241121] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
- [ 0.241275] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
- [ 0.241430] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
- [ 0.241593] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
- [ 0.241756] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
- [ 0.241919] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
- [ 0.242027] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.242029] vgaarb: loaded
- [ 0.242065] PCI: Using ACPI for IRQ routing
- [ 0.242065] pnp: PnP ACPI init
- [ 0.242065] ACPI: bus type pnp registered
- [ 0.247835] pnp 00:0c: mem resource (0xf0000-0xf3fff) overlaps 0000:01:09.0 BAR 6 (0x0-0xfffff), disabling
- [ 0.247839] pnp 00:0c: mem resource (0xf4000-0xf7fff) overlaps 0000:01:09.0 BAR 6 (0x0-0xfffff), disabling
- [ 0.247843] pnp 00:0c: mem resource (0xf8000-0xfbfff) overlaps 0000:01:09.0 BAR 6 (0x0-0xfffff), disabling
- [ 0.247847] pnp 00:0c: mem resource (0xfc000-0xfffff) overlaps 0000:01:09.0 BAR 6 (0x0-0xfffff), disabling
- [ 0.247850] pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:01:09.0 BAR 6 (0x0-0xfffff), disabling
- [ 0.247890] pnp: PnP ACPI: found 13 devices
- [ 0.247891] ACPI: ACPI bus type pnp unregistered
- [ 0.247896] PnPBIOS: Disabled by ACPI PNP
- [ 0.247909] system 00:01: ioport range 0x4000-0x407f has been reserved
- [ 0.247912] system 00:01: ioport range 0x4080-0x40ff has been reserved
- [ 0.247915] system 00:01: ioport range 0x4400-0x447f has been reserved
- [ 0.247918] system 00:01: ioport range 0x4480-0x44ff has been reserved
- [ 0.247921] system 00:01: ioport range 0x4800-0x487f has been reserved
- [ 0.247924] system 00:01: ioport range 0x4880-0x48ff has been reserved
- [ 0.247934] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.247937] system 00:02: ioport range 0x290-0x29e has been reserved
- [ 0.247945] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
- [ 0.247950] system 00:0c: iomem range 0x9fff0000-0x9fffffff could not be reserved
- [ 0.247954] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
- [ 0.247957] system 00:0c: iomem range 0x100000-0x9ffeffff could not be reserved
- [ 0.247960] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.247963] system 00:0c: iomem range 0xfee00000-0xfeefffff has been reserved
- [ 0.247966] system 00:0c: iomem range 0xfefff000-0xfeffffff has been reserved
- [ 0.247969] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reserved
- [ 0.247973] system 00:0c: iomem range 0xfff90000-0xfffbffff has been reserved
- [ 0.247976] system 00:0c: iomem range 0xfffed000-0xfffeffff has been reserved
- [ 0.282758] Switching to clocksource acpi_pm
- [ 0.282776] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
- [ 0.282776] pci 0000:00:09.0: IO window: 0xa000-0xafff
- [ 0.282776] pci 0000:00:09.0: MEM window: 0xfdc00000-0xfdefffff
- [ 0.282776] pci 0000:00:09.0: PREFETCH window: 0xfdf00000-0xfdffffff
- [ 0.282776] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
- [ 0.282776] pci 0000:00:0b.0: IO window: 0x9000-0x9fff
- [ 0.282776] pci 0000:00:0b.0: MEM window: 0xfdb00000-0xfdbfffff
- [ 0.282776] pci 0000:00:0b.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
- [ 0.282776] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
- [ 0.282776] pci 0000:00:0c.0: IO window: 0x8000-0x8fff
- [ 0.282776] pci 0000:00:0c.0: MEM window: 0xfd900000-0xfd9fffff
- [ 0.282776] pci 0000:00:0c.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
- [ 0.282776] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
- [ 0.282776] pci 0000:00:0d.0: IO window: 0x7000-0x7fff
- [ 0.282776] pci 0000:00:0d.0: MEM window: 0xfd700000-0xfd7fffff
- [ 0.282776] pci 0000:00:0d.0: PREFETCH window: 0x000000fd600000-0x000000fd6fffff
- [ 0.282776] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
- [ 0.282776] pci 0000:00:0e.0: IO window: 0x6000-0x6fff
- [ 0.282776] pci 0000:00:0e.0: MEM window: 0xf8000000-0xfbffffff
- [ 0.282776] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
- [ 0.282776] pci 0000:00:09.0: setting latency timer to 64
- [ 0.282776] pci 0000:00:0b.0: setting latency timer to 64
- [ 0.282776] pci 0000:00:0c.0: setting latency timer to 64
- [ 0.282776] pci 0000:00:0d.0: setting latency timer to 64
- [ 0.282776] pci 0000:00:0e.0: setting latency timer to 64
- [ 0.282776] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.282776] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.282776] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
- [ 0.282776] pci_bus 0000:01: resource 1 mem: [0xfdc00000-0xfdefffff]
- [ 0.282776] pci_bus 0000:01: resource 2 pref mem [0xfdf00000-0xfdffffff]
- [ 0.282776] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
- [ 0.282776] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
- [ 0.282776] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff]
- [ 0.282776] pci_bus 0000:02: resource 1 mem: [0xfdb00000-0xfdbfffff]
- [ 0.282776] pci_bus 0000:02: resource 2 pref mem [0xfda00000-0xfdafffff]
- [ 0.282776] pci_bus 0000:03: resource 0 io: [0x8000-0x8fff]
- [ 0.282776] pci_bus 0000:03: resource 1 mem: [0xfd900000-0xfd9fffff]
- [ 0.282776] pci_bus 0000:03: resource 2 pref mem [0xfd800000-0xfd8fffff]
- [ 0.282776] pci_bus 0000:04: resource 0 io: [0x7000-0x7fff]
- [ 0.282776] pci_bus 0000:04: resource 1 mem: [0xfd700000-0xfd7fffff]
- [ 0.282776] pci_bus 0000:04: resource 2 pref mem [0xfd600000-0xfd6fffff]
- [ 0.282776] pci_bus 0000:05: resource 0 io: [0x6000-0x6fff]
- [ 0.282776] pci_bus 0000:05: resource 1 mem: [0xf8000000-0xfbffffff]
- [ 0.282776] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff]
- [ 0.282776] NET: Registered protocol family 2
- [ 0.282776] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.282776] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.282776] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.283082] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.283086] TCP reno registered
- [ 0.283228] NET: Registered protocol family 1
- [ 0.300094] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.300100] pci 0000:00:0b.0: Found disabled HT MSI Mapping
- [ 0.300107] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.300113] pci 0000:00:0b.0: Linking AER extended capability
- [ 0.300148] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.300153] pci 0000:00:0c.0: Found disabled HT MSI Mapping
- [ 0.300160] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.300163] pci 0000:00:0c.0: Linking AER extended capability
- [ 0.300201] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.300206] pci 0000:00:0d.0: Found disabled HT MSI Mapping
- [ 0.300213] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.300216] pci 0000:00:0d.0: Linking AER extended capability
- [ 0.300256] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.300261] pci 0000:00:0e.0: Found disabled HT MSI Mapping
- [ 0.300268] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.300271] pci 0000:00:0e.0: Linking AER extended capability
- [ 0.300286] pci 0000:01:09.0: Firmware left e100 interrupts enabled; disabling
- [ 0.300296] pci 0000:05:00.0: Boot video device
- [ 0.300364] Unpacking initramfs...
- [ 0.496213] Freeing initrd memory: 7643k freed
- [ 0.508462] audit: initializing netlink socket (disabled)
- [ 0.508483] type=2000 audit(1275630182.508:1): initialized
- [ 0.508776] highmem bounce pool size: 64 pages
- [ 0.508782] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.510144] VFS: Disk quotas dquot_6.5.2
- [ 0.510198] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.510277] msgmni has been set to 1715
- [ 0.510542] alg: No test for stdrng (krng)
- [ 0.510596] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.510600] io scheduler noop registered
- [ 0.510602] io scheduler anticipatory registered
- [ 0.510604] io scheduler deadline registered
- [ 0.510636] io scheduler cfq registered (default)
- [ 0.510747] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
- [ 0.510753] pcieport 0000:00:0b.0: setting latency timer to 64
- [ 0.510818] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
- [ 0.510823] pcieport 0000:00:0c.0: setting latency timer to 64
- [ 0.510878] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
- [ 0.510882] pcieport 0000:00:0d.0: setting latency timer to 64
- [ 0.510939] pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X
- [ 0.510943] pcieport 0000:00:0e.0: setting latency timer to 64
- [ 0.511059] isapnp: Scanning for PnP cards...
- [ 0.863555] isapnp: No Plug & Play device found
- [ 0.864816] Linux agpgart interface v0.103
- [ 0.865032] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.865119] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.865390] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.865538] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 0.868447] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.868455] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.868529] mice: PS/2 mouse device common for all mice
- [ 0.868583] rtc_cmos 00:04: RTC can wake from S4
- [ 0.868615] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 0.868639] rtc0: alarms up to one year, y3k, 242 bytes nvram
- [ 0.868650] cpuidle: using governor ladder
- [ 0.868652] cpuidle: using governor menu
- [ 0.868657] No iBFT detected.
- [ 0.869006] TCP cubic registered
- [ 0.869145] NET: Registered protocol family 10
- [ 0.869580] lo: Disabled Privacy Extensions
- [ 0.869863] Mobile IPv6
- [ 0.869866] NET: Registered protocol family 17
- [ 0.869886] Using IPI No-Shortcut mode
- [ 0.869950] PM: Resume from disk failed.
- [ 0.869960] registered taskstats version 1
- [ 0.870204] rtc_cmos 00:04: setting system clock to 2010-06-04 05:43:03 UTC (1275630183)
- [ 0.870231] Initalizing network drop monitor service
- [ 0.870264] Freeing unused kernel memory: 372k freed
- [ 0.870755] Write protecting the kernel text: 2492k
- [ 0.870779] Write protecting the kernel read-only data: 916k
- [ 0.880001] udev: starting version 154
- [ 0.888986] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 1.016189] SCSI subsystem initialized
- [ 1.018627] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
- [ 1.019010] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
- [ 1.019030] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
- [ 1.019039] forcedeth 0000:00:0a.0: setting latency timer to 64
- [ 1.019137] nv_probe: set workaround bit for reversed mac addr
- [ 1.037790] libata version 3.00 loaded.
- [ 1.055747] usbcore: registered new interface driver usbfs
- [ 1.055795] usbcore: registered new interface driver hub
- [ 1.055828] usbcore: registered new device driver usb
- [ 1.059371] thermal LNXTHERM:01: registered as thermal_zone0
- [ 1.059379] ACPI: Thermal Zone [THRM] (22 C)
- [ 1.063659] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.063949] Floppy drive(s): fd0 is 1.44M
- [ 1.070107] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 1.070110] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 1.070481] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
- [ 1.070498] e100 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
- [ 1.070574] e100 0000:01:09.0: setting latency timer to 64
- [ 1.073172] fan PNP0C0B:00: registered as cooling_device0
- [ 1.073179] ACPI: Fan [FAN] (on)
- [ 1.092971] e100 0000:01:09.0: PME# disabled
- [ 1.093620] e100: eth0: e100_probe: addr 0xfdeff000, irq 19, MAC addr 00:d0:b7:85:0a:3f
- [ 1.096565] FDC 0 is a post-1991 82077
- [ 1.536830] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:16:17:94:32:d6
- [ 1.536835] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
- [ 1.536877] sata_nv 0000:00:07.0: version 3.5
- [ 1.537361] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
- [ 1.537376] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 22 (level, low) -> IRQ 22
- [ 1.537478] sata_nv 0000:00:07.0: setting latency timer to 64
- [ 1.537771] scsi0 : sata_nv
- [ 1.537900] scsi1 : sata_nv
- [ 1.538060] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 22
- [ 1.538063] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 22
- [ 1.538344] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
- [ 1.538352] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
- [ 1.538366] ehci_hcd 0000:00:02.1: setting latency timer to 64
- [ 1.538369] ehci_hcd 0000:00:02.1: EHCI Host Controller
- [ 1.538398] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
- [ 1.538425] ehci_hcd 0000:00:02.1: debug port 1
- [ 1.538431] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
- [ 1.538443] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
- [ 1.549026] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
- [ 1.549064] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.549067] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.549070] usb usb1: Product: EHCI Host Controller
- [ 1.549072] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
- [ 1.549074] usb usb1: SerialNumber: 0000:00:02.1
- [ 1.549189] usb usb1: configuration #1 chosen from 1 choice
- [ 1.549228] hub 1-0:1.0: USB hub found
- [ 1.549244] hub 1-0:1.0: 10 ports detected
- [ 1.549317] pata_amd 0000:00:06.0: version 0.4.1
- [ 1.549383] pata_amd 0000:00:06.0: setting latency timer to 64
- [ 1.549457] scsi2 : pata_amd
- [ 1.549525] scsi3 : pata_amd
- [ 1.550215] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
- [ 1.550218] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
- [ 1.550578] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
- [ 1.550585] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
- [ 1.550632] sata_nv 0000:00:08.0: setting latency timer to 64
- [ 1.550686] scsi4 : sata_nv
- [ 1.550757] scsi5 : sata_nv
- [ 1.550902] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 20
- [ 1.550905] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 20
- [ 1.572867] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.573231] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
- [ 1.573238] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
- [ 1.573260] ohci_hcd 0000:00:02.0: setting latency timer to 64
- [ 1.573263] ohci_hcd 0000:00:02.0: OHCI Host Controller
- [ 1.573283] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
- [ 1.573314] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
- [ 1.630021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.630024] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.630027] usb usb2: Product: OHCI Host Controller
- [ 1.630029] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
- [ 1.630031] usb usb2: SerialNumber: 0000:00:02.0
- [ 1.630131] usb usb2: configuration #1 chosen from 1 choice
- [ 1.630161] hub 2-0:1.0: USB hub found
- [ 1.630172] hub 2-0:1.0: 10 ports detected
- [ 1.848027] ata1: SATA link down (SStatus 0 SControl 300)
- [ 1.860035] ata5: SATA link down (SStatus 0 SControl 300)
- [ 1.888451] ata3.00: ATA-6: ST380011A, 8.01, max UDMA/100
- [ 1.888455] ata3.00: 156301488 sectors, multi 16: LBA48
- [ 1.888815] ata3.01: ATA-5: QUANTUM FIREBALLP LM15, A35.0700, max UDMA/66
- [ 1.888817] ata3.01: 29336832 sectors, multi 16: LBA
- [ 1.888838] ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c5c000) ACPI=0x3f01f (20:30:0x1f)
- [ 1.888844] ata3: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc6c5c000) ACPI=0x1f01f (20:30:0x1f)
- [ 1.904373] ata3.00: configured for UDMA/100
- [ 1.920483] ata3.01: configured for UDMA/66
- [ 2.108022] usb 2-7: new low speed USB device using ohci_hcd and address 2
- [ 2.160028] ata2: SATA link down (SStatus 0 SControl 300)
- [ 2.160165] scsi 2:0:0:0: Direct-Access ATA ST380011A 8.01 PQ: 0 ANSI: 5
- [ 2.160344] scsi 2:0:1:0: Direct-Access ATA QUANTUM FIREBALL A35. PQ: 0 ANSI: 5
- [ 2.332329] ata4.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, J808, max UDMA/33
- [ 2.332355] ata4.01: ATAPI: PLEXTOR CD-R PX-W1210A, 1.10, max MWDMA2
- [ 2.332374] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c5c000) ACPI=0x701f (60:120:0x1b)
- [ 2.332378] ata4: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc6c5c000) ACPI=0x39f (60:120:0x1b)
- [ 2.348280] ata4.00: configured for UDMA/33
- [ 2.364237] ata4.01: configured for MWDMA2
- [ 2.370478] scsi 3:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1612 J808 PQ: 0 ANSI: 5
- [ 2.371325] scsi 3:0:1:0: CD-ROM PLEXTOR CD-R PX-W1210A 1.10 PQ: 0 ANSI: 5
- [ 2.485034] usb 2-7: New USB device found, idVendor=051d, idProduct=0002
- [ 2.485036] usb 2-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
- [ 2.485039] usb 2-7: Product: Back-UPS RS 1500 FW:8.g8 .D USB FW:g8
- [ 2.485041] usb 2-7: Manufacturer: American Power Conversion
- [ 2.485043] usb 2-7: SerialNumber: QB0512132444
- [ 2.485101] usb 2-7: configuration #1 chosen from 1 choice
- [ 2.680018] ata6: SATA link down (SStatus 0 SControl 300)
- [ 2.696948] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 2.696990] sd 2:0:0:0: [sda] Write Protect is off
- [ 2.696993] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.697071] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.697259] sda:sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
- [ 2.703948] Uniform CD-ROM driver Revision: 3.20
- [ 2.704085] sr 3:0:0:0: Attached scsi CD-ROM sr0
- [ 2.706304] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
- [ 2.706380] sr 3:0:1:0: Attached scsi CD-ROM sr1
- [ 2.707086] sda1 sda2 <
- [ 2.707110] sd 2:0:1:0: [sdb] 29336832 512-byte logical blocks: (15.0 GB/13.9 GiB)
- [ 2.717294] sda5 sda6
- [ 2.727555] sd 2:0:1:0: [sdb] Write Protect is off
- [ 2.727558] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
- [ 2.737677] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.737682] sda7 sda8 sda9 sda10 sda11 sda12 >
- [ 2.784780] sdb: sdb1
- [ 2.791066] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 2.791282] sd 2:0:1:0: [sdb] Attached SCSI disk
- [ 2.797235] usbcore: registered new interface driver hiddev
- [ 2.801888] sd 2:0:0:0: Attached scsi generic sg0 type 0
- [ 2.802217] sd 2:0:1:0: Attached scsi generic sg1 type 0
- [ 2.802571] sr 3:0:0:0: Attached scsi generic sg2 type 5
- [ 2.802894] sr 3:0:1:0: Attached scsi generic sg3 type 5
- [ 3.866257] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g8 .D USB FW:g8 ] on usb-0000:00:02.0-7/input0
- [ 3.866304] usbcore: registered new interface driver usbhid
- [ 3.866309] usbhid: v2.6:USB HID core driver
- [ 3.916750] PM: Starting manual resume from disk
- [ 3.916754] PM: Resume from partition 8:10
- [ 3.916756] PM: Checking hibernation image.
- [ 3.934289] PM: Error -22 checking image file
- [ 3.934293] PM: Resume from disk failed.
- [ 3.965635] kjournald starting. Commit interval 5 seconds
- [ 3.965647] EXT3-fs: mounted filesystem with ordered data mode.
- [ 5.823517] udev: starting version 154
- [ 6.052364] processor LNXCPU:00: registered as cooling_device1
- [ 6.052403] processor LNXCPU:01: registered as cooling_device2
- [ 6.201104] input: PC Speaker as /devices/platform/pcspkr/input/input1
- [ 6.225726] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
- [ 6.225740] ACPI: Power Button [PWRB]
- [ 6.226273] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 6.226277] ACPI: Power Button [PWRF]
- [ 6.289955] udev: renamed network interface eth0 to eth1
- [ 6.290883] udev: renamed network interface eth1_rename to eth0
- [ 6.566855] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
- [ 6.566900] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
- [ 6.652160] [drm] Initialized drm 1.1.0 20060810
- [ 6.788229] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
- [ 7.037632] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
- [ 7.037651] nouveau 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
- [ 7.037658] nouveau 0000:05:00.0: setting latency timer to 64
- [ 7.043879] [drm] nouveau 0000:05:00.0: Detected an NV50 generation card (0x092880a2)
- [ 7.044755] [drm] nouveau 0000:05:00.0: Attempting to load BIOS image from PRAMIN
- [ 7.098223] [drm] nouveau 0000:05:00.0: ... appears to be valid
- [ 7.098227] [drm] nouveau 0000:05:00.0: BIT BIOS found
- [ 7.098229] [drm] nouveau 0000:05:00.0: Bios version 62.92.1f.00
- [ 7.098234] [drm] nouveau 0000:05:00.0: TMDS table revision 2.0 not currently supported
- [ 7.098237] [drm] nouveau 0000:05:00.0: Found Display Configuration Block version 4.0
- [ 7.098241] [drm] nouveau 0000:05:00.0: DCB connector table: VHER 0x40 5 16 4
- [ 7.098245] [drm] nouveau 0000:05:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
- [ 7.098248] [drm] nouveau 0000:05:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
- [ 7.098251] [drm] nouveau 0000:05:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
- [ 7.098253] [drm] nouveau 0000:05:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff
- [ 7.098256] [drm] nouveau 0000:05:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff
- [ 7.098259] [drm] nouveau 0000:05:00.0: Raw DCB entry 0: 02000300 00000028
- [ 7.098263] [drm] nouveau 0000:05:00.0: Raw DCB entry 1: 01000302 00000030
- [ 7.098265] [drm] nouveau 0000:05:00.0: Raw DCB entry 2: 04011310 00000028
- [ 7.098268] [drm] nouveau 0000:05:00.0: Raw DCB entry 3: 02011312 00000030
- [ 7.098270] [drm] nouveau 0000:05:00.0: Raw DCB entry 4: 010223f1 00c0c083
- [ 7.098280] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xC10F
- [ 7.142415] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xC4B3
- [ 7.160016] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xD22E
- [ 7.160024] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xD350
- [ 7.165533] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xD580
- [ 7.165535] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xD5E5
- [ 7.188018] [drm] nouveau 0000:05:00.0: 0xD5E5: Condition still not met after 20ms, skipping following opcodes
- [ 7.188026] [drm] nouveau 0000:05:00.0: 0xB340: parsing output script 0
- [ 7.188029] [drm] nouveau 0000:05:00.0: 0xB340: parsing output script 0
- [ 7.188032] [drm] nouveau 0000:05:00.0: 0x9F96: parsing output script 0
- [ 7.268843] [TTM] Zone kernel: Available graphics memory: 439382 kiB.
- [ 7.268846] [TTM] Zone highmem: Available graphics memory: 1297466 kiB.
- [ 7.268859] [drm] nouveau 0000:05:00.0: 512 MiB VRAM
- [ 7.280166] [drm] nouveau 0000:05:00.0: 512 MiB GART (aperture)
- [ 7.280733] [drm] nouveau 0000:05:00.0: Allocating FIFO number 1
- [ 7.283451] [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 1
- [ 7.283832] [drm] nouveau 0000:05:00.0: Detected a DAC output
- [ 7.283836] [drm] nouveau 0000:05:00.0: Detected a TMDS output
- [ 7.283839] [drm] nouveau 0000:05:00.0: Detected a DAC output
- [ 7.283841] [drm] nouveau 0000:05:00.0: Detected a TMDS output
- [ 7.283844] [drm] nouveau 0000:05:00.0: DCB encoder 1 unknown
- [ 7.283848] [drm] nouveau 0000:05:00.0: Detected a DVI-I connector
- [ 7.284089] [drm] nouveau 0000:05:00.0: Detected a DVI-I connector
- [ 7.461205] [drm] nouveau 0000:05:00.0: allocated 1280x1024 fb: 0x40250000, bo f647dc00
- [ 7.462856] [drm] nouveau 0000:05:00.0: 0x10DB: parsing clock script 0
- [ 7.463350] Console: switching to colour frame buffer device 160x64
- [ 7.464993] fb0: nouveaufb frame buffer device
- [ 7.464995] registered panic notifier
- [ 7.465000] [drm] Initialized nouveau 0.0.15 20090420 for 0000:05:00.0 on minor 0
- [ 7.582735] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
- [ 7.582743] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
- [ 7.582794] Intel ICH 0000:00:04.0: setting latency timer to 64
- [ 7.904025] intel8x0_measure_ac97_clock: measured 54611 usecs (2680 samples)
- [ 7.904029] intel8x0: clocking to 46949
- [ 8.747312] Adding 2361512k swap on /dev/sda10. Priority:-1 extents:1 across:2361512k
- [ 9.347421] EXT3 FS on sda1, internal journal
- [ 9.492391] loop: module loaded
- [ 9.529474] fuse init (API version 7.13)
- [ 9.628487] w83627ehf: Found W83627EHG chip at 0x290
- [ 9.628676] ACPI: I/O resource w83627ehf [0x295-0x296] conflicts with ACPI region SEN1 [0x295-0x296]
- [ 9.628703] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 12.621080] kjournald starting. Commit interval 5 seconds
- [ 12.621283] EXT3 FS on sda5, internal journal
- [ 12.621290] EXT3-fs: mounted filesystem with ordered data mode.
- [ 12.674724] kjournald starting. Commit interval 5 seconds
- [ 12.674945] EXT3 FS on sda6, internal journal
- [ 12.674952] EXT3-fs: mounted filesystem with ordered data mode.
- [ 12.730952] kjournald starting. Commit interval 5 seconds
- [ 12.731178] EXT3 FS on sda7, internal journal
- [ 12.731184] EXT3-fs: mounted filesystem with ordered data mode.
- [ 12.771595] kjournald starting. Commit interval 5 seconds
- [ 12.771823] EXT3 FS on sda8, internal journal
- [ 12.771828] EXT3-fs: mounted filesystem with ordered data mode.
- [ 12.844813] kjournald starting. Commit interval 5 seconds
- [ 12.845028] EXT3 FS on sda9, internal journal
- [ 12.845035] EXT3-fs: mounted filesystem with ordered data mode.
- [ 12.919718] kjournald starting. Commit interval 5 seconds
- [ 12.919956] EXT3 FS on sda11, internal journal
- [ 12.919962] EXT3-fs: mounted filesystem with ordered data mode.
- [ 13.119536] kjournald starting. Commit interval 5 seconds
- [ 13.185304] EXT3 FS on sda12, internal journal
- [ 13.185317] EXT3-fs: mounted filesystem with ordered data mode.
- [ 13.366052] kjournald starting. Commit interval 5 seconds
- [ 13.380453] EXT3 FS on sdb1, internal journal
- [ 13.380461] EXT3-fs: mounted filesystem with ordered data mode.
- [ 14.873877] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 14.894257] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 14.894948] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- [ 14.894950] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- [ 14.894952] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- [ 26.432016] eth0: no IPv6 routers present
- [ 199.199770] nvidia: module license 'NVIDIA' taints kernel.
- [ 199.199775] Disabling lock debugging due to kernel taint
- [ 200.154123] NVRM: The NVIDIA probe routine was not called for 1 device(s).
- [ 200.154128] NVRM: This can occur when a driver such as rivafb, nvidiafb or
- [ 200.154130] NVRM: rivatv was loaded and obtained ownership of the NVIDIA
- [ 200.154131] NVRM: device(s).
- [ 200.154135] NVRM: Try unloading the rivafb, nvidiafb or rivatv kernel module
- [ 200.154136] NVRM: (and/or reconfigure your kernel without rivafb/nvidiafb
- [ 200.154137] NVRM: support), then try loading the NVIDIA kernel module again.
- [ 200.154140] NVRM: No NVIDIA graphics adapter probed!
- [ 3108.993135] NVRM: The NVIDIA probe routine was not called for 1 device(s).
- [ 3108.993140] NVRM: This can occur when a driver such as nouveau, rivafb,
- [ 3108.993141] NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
- [ 3108.993142] NVRM: the NVIDIA device(s).
- [ 3108.993145] NVRM: Try unloading the conflicting kernel module (and/or
- [ 3108.993147] NVRM: reconfigure your kernel without the conflicting
- [ 3108.993148] NVRM: driver(s)), then try loading the NVIDIA kernel module
- [ 3108.993149] NVRM: again.
- [ 3108.993151] NVRM: No NVIDIA graphics adapter probed!
- [ 4155.944760] i2c /dev entries driver
- [ 4282.394196] NVRM: The NVIDIA probe routine was not called for 1 device(s).
- [ 4282.394201] NVRM: This can occur when a driver such as rivafb, nvidiafb or
- [ 4282.394203] NVRM: rivatv was loaded and obtained ownership of the NVIDIA
- [ 4282.394204] NVRM: device(s).
- [ 4282.394207] NVRM: Try unloading the rivafb, nvidiafb or rivatv kernel module
- [ 4282.394208] NVRM: (and/or reconfigure your kernel without rivafb/nvidiafb
- [ 4282.394209] NVRM: support), then try loading the NVIDIA kernel module again.
- [ 4282.394212] NVRM: No NVIDIA graphics adapter probed!