Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-23-generic] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Device Model: WL150GSA16100
- Serial Number: WOL240152666
- Firmware Version: 21.07QR3
- User Capacity: 150,039,945,216 bytes [150 GB]
- Sector Size: 512 bytes logical/physical
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 7
- ATA Standard is: ATA/ATAPI-7 published, ANSI INCITS 397-2005
- Local Time is: Wed Aug 1 14:04:25 2012 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- See vendor-specific Attribute list for marginal Attributes.
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 4783) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 72) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x103f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 200 001 051 Pre-fail Always In_the_past 0
- 3 Spin_Up_Time 0x0007 192 164 021 Pre-fail Always - 3416
- 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 53
- 5 Reallocated_Sector_Ct 0x0033 169 169 140 Pre-fail Always - 487
- 7 Seek_Error_Rate 0x000a 200 200 051 Old_age Always - 0
- 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16775
- 10 Spin_Retry_Count 0x0012 100 253 051 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 53
- 194 Temperature_Celsius 0x0022 116 099 000 Old_age Always - 31
- 196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 383
- 197 Current_Pending_Sector 0x0012 200 173 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0008 200 001 051 Old_age Offline In_the_past 0
- SMART Error Log Version: 1
- ATA Error Count: 50638 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 50638 occurred at disk power-on lifetime: 16446 hours (685 days + 6 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 b4 04 3e e0 Error: UNC 8 sectors at LBA = 0x003e04b4 = 4064436
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 b3 04 3e 40 00 16d+09:41:45.822 READ DMA EXT
- ec 00 00 00 00 00 00 00 16d+09:41:45.822 IDENTIFY DEVICE
- ef 03 46 00 00 00 00 00 16d+09:41:45.822 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 00 00 16d+09:41:45.822 IDENTIFY DEVICE
- 25 00 08 b3 04 3e 40 00 16d+09:41:45.822 READ DMA EXT
- Error 50637 occurred at disk power-on lifetime: 16446 hours (685 days + 6 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 b4 04 3e e0 Error: UNC 8 sectors at LBA = 0x003e04b4 = 4064436
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 b3 04 3e 40 00 16d+09:41:42.222 READ DMA EXT
- ec 00 00 00 00 00 00 00 16d+09:41:42.222 IDENTIFY DEVICE
- ef 03 46 00 00 00 00 00 16d+09:41:42.222 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 00 00 16d+09:41:42.222 IDENTIFY DEVICE
- 25 00 08 b3 04 3e 40 00 16d+09:41:42.222 READ DMA EXT
- Error 50636 occurred at disk power-on lifetime: 16446 hours (685 days + 6 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 b4 04 3e e0 Error: UNC 8 sectors at LBA = 0x003e04b4 = 4064436
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 b3 04 3e 40 00 16d+09:41:37.572 READ DMA EXT
- ec 00 00 00 00 00 00 00 16d+09:41:37.572 IDENTIFY DEVICE
- ef 03 46 00 00 00 00 00 16d+09:41:37.572 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 00 00 16d+09:41:37.572 IDENTIFY DEVICE
- 25 00 08 b3 04 3e 40 00 16d+09:41:37.572 READ DMA EXT
- Error 50635 occurred at disk power-on lifetime: 16446 hours (685 days + 6 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 b4 04 3e e0 Error: UNC 8 sectors at LBA = 0x003e04b4 = 4064436
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 b3 04 3e 40 00 16d+09:41:32.972 READ DMA EXT
- ec 00 00 00 00 00 00 00 16d+09:41:32.972 IDENTIFY DEVICE
- ef 03 46 00 00 00 00 00 16d+09:41:32.972 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 00 00 16d+09:41:32.972 IDENTIFY DEVICE
- 25 00 08 b3 04 3e 40 00 16d+09:41:32.972 READ DMA EXT
- Error 50634 occurred at disk power-on lifetime: 16446 hours (685 days + 6 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 b4 04 3e e0 Error: UNC 8 sectors at LBA = 0x003e04b4 = 4064436
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 b3 04 3e 40 00 16d+09:41:29.322 READ DMA EXT
- ec 00 00 00 00 00 00 00 16d+09:41:29.322 IDENTIFY DEVICE
- ef 03 46 00 00 00 00 00 16d+09:41:29.322 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 00 00 16d+09:41:29.322 IDENTIFY DEVICE
- 25 00 08 b3 04 3e 40 00 16d+09:41:29.322 READ DMA EXT
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Conveyance offline Completed without error 00% 16718 -
- # 2 Extended offline Completed without error 00% 1 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement