Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- dhcppc6 chichimeka # dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.25-gentoo (root@dhcppc8) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) ) #5 SMP Sun Feb 2 08:35:25 CST 2014
- [ 0.000000] Command line: BOOT_IMAGE=/kernel-3.10.25-xuchimeh root=/dev/sda3 ro init=/usr/lib/systemd/systemd init=/usr/lib/systemd/systemd
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000099497fff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000099498000-0x000000009949efff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000009949f000-0x0000000099d57fff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000099d58000-0x0000000099fbdfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000099fbe000-0x00000000a9fc7fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000a9fc8000-0x00000000aa5a9fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000aa5aa000-0x00000000aa696fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000aa697000-0x00000000aaffefff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000ab800000-0x00000000af9fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000084e5fffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: Gigabyte Technology Co., Ltd. B85M-D3H/B85M-D3H, BIOS F7 08/03/2013
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x84e600 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-E7FFF uncachable
- [ 0.000000] E8000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask 7800000000 write-back
- [ 0.000000] 1 base 0800000000 mask 7FC0000000 write-back
- [ 0.000000] 2 base 0840000000 mask 7FF0000000 write-back
- [ 0.000000] 3 base 00C0000000 mask 7FC0000000 uncachable
- [ 0.000000] 4 base 00B0000000 mask 7FF0000000 uncachable
- [ 0.000000] 5 base 00AC000000 mask 7FFC000000 uncachable
- [ 0.000000] 6 base 00AB800000 mask 7FFF800000 uncachable
- [ 0.000000] 7 base 084F000000 mask 7FFF000000 uncachable
- [ 0.000000] 8 base 084E800000 mask 7FFF800000 uncachable
- [ 0.000000] 9 base 084E600000 mask 7FFFE00000 uncachable
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820: update [mem 0xab800000-0xffffffff] usable ==> reserved
- [ 0.000000] e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fd740-0x000fd74f] mapped at [ffff8800000fd740]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x02033000, 0x02033fff] PGTABLE
- [ 0.000000] BRK [0x02034000, 0x02034fff] PGTABLE
- [ 0.000000] BRK [0x02035000, 0x02035fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x84e400000-0x84e5fffff]
- [ 0.000000] [mem 0x84e400000-0x84e5fffff] page 2M
- [ 0.000000] BRK [0x02036000, 0x02036fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x84c000000-0x84e3fffff]
- [ 0.000000] [mem 0x84c000000-0x84e3fffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x800000000-0x84bffffff]
- [ 0.000000] [mem 0x800000000-0x83fffffff] page 1G
- [ 0.000000] [mem 0x840000000-0x84bffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x99497fff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
- [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
- [ 0.000000] [mem 0x80000000-0x993fffff] page 2M
- [ 0.000000] [mem 0x99400000-0x99497fff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x9949f000-0x99d57fff]
- [ 0.000000] [mem 0x9949f000-0x995fffff] page 4k
- [ 0.000000] [mem 0x99600000-0x99bfffff] page 2M
- [ 0.000000] [mem 0x99c00000-0x99d57fff] page 4k
- [ 0.000000] BRK [0x02037000, 0x02037fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x99fbe000-0xa9fc7fff]
- [ 0.000000] [mem 0x99fbe000-0x99ffffff] page 4k
- [ 0.000000] [mem 0x9a000000-0xa9dfffff] page 2M
- [ 0.000000] [mem 0xa9e00000-0xa9fc7fff] page 4k
- [ 0.000000] BRK [0x02038000, 0x02038fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0xaafff000-0xaaffffff]
- [ 0.000000] [mem 0xaafff000-0xaaffffff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
- [ 0.000000] [mem 0x100000000-0x7ffffffff] page 1G
- [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
- [ 0.000000] ACPI: XSDT 00000000aa66f078 00074 (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: FACP 00000000aa67a4d0 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: DSDT 00000000aa66f188 0B343 (v02 ALASKA A M I 000000F7 INTL 20091112)
- [ 0.000000] ACPI: FACS 00000000aa695080 00040
- [ 0.000000] ACPI: APIC 00000000aa67a5e0 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: FPDT 00000000aa67a678 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: SSDT 00000000aa67a6c0 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 0.000000] ACPI: SSDT 00000000aa67ac00 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
- [ 0.000000] ACPI: MCFG 00000000aa67b6d8 0003C (v01 01072009 MSFT 00000097)
- [ 0.000000] ACPI: HPET 00000000aa67b718 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
- [ 0.000000] ACPI: SSDT 00000000aa67b750 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
- [ 0.000000] ACPI: SSDT 00000000aa67bac0 03299 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
- [ 0.000000] ACPI: DMAR 00000000aa67ed60 000B8 (v01 INTEL HSW 00000001 INTL 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000084e5fffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x84e5fffff]
- [ 0.000000] NODE_DATA [mem 0x84e5d6000-0x84e5fbfff]
- [ 0.000000] [ffffea0000000000-ffffea00213fffff] PMD -> [ffff88082dc00000-ffff88084dbfffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x84e5fffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
- [ 0.000000] node 0: [mem 0x00100000-0x99497fff]
- [ 0.000000] node 0: [mem 0x9949f000-0x99d57fff]
- [ 0.000000] node 0: [mem 0x99fbe000-0xa9fc7fff]
- [ 0.000000] node 0: [mem 0xaafff000-0xaaffffff]
- [ 0.000000] node 0: [mem 0x100000000-0x84e5fffff]
- [ 0.000000] On node 0 totalpages: 8356600
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 10806 pages used for memmap
- [ 0.000000] DMA32 zone: 691548 pages, LIFO batch:31
- [ 0.000000] Normal zone: 119704 pages used for memmap
- [ 0.000000] Normal zone: 7661056 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 0000000099498000 - 000000009949f000
- [ 0.000000] PM: Registered nosave memory: 0000000099d58000 - 0000000099fbe000
- [ 0.000000] PM: Registered nosave memory: 00000000a9fc8000 - 00000000aa5aa000
- [ 0.000000] PM: Registered nosave memory: 00000000aa5aa000 - 00000000aa697000
- [ 0.000000] PM: Registered nosave memory: 00000000aa697000 - 00000000aafff000
- [ 0.000000] PM: Registered nosave memory: 00000000ab000000 - 00000000ab800000
- [ 0.000000] PM: Registered nosave memory: 00000000ab800000 - 00000000afa00000
- [ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000f8000000
- [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
- [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
- [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
- [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
- [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
- [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
- [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
- [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
- [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
- [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
- [ 0.000000] e820: [mem 0xafa00000-0xf7ffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88084e200000 s79872 r8192 d22528 u262144
- [ 0.000000] pcpu-alloc: s79872 r8192 d22528 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8226005
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-3.10.25-xuchimeh root=/dev/sda3 ro init=/usr/lib/systemd/systemd init=/usr/lib/systemd/systemd
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 32818164k/34838528k available (7426k kernel code, 1412128k absent, 608236k reserved, 5777k data, 1548k init)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=8.
- [ 0.000000] NR_IRQS:262400 nr_irqs:744 16
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.001000] tsc: Detected 3392.063 MHz processor
- [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.12 BogoMIPS (lpj=3392063)
- [ 0.000243] pid_max: default: 32768 minimum: 301
- [ 0.000378] Security Framework initialized
- [ 0.000498] SELinux: Initializing.
- [ 0.000622] SELinux: Starting in permissive mode
- [ 0.001719] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
- [ 0.006024] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- [ 0.008003] Mount-cache hash table entries: 256
- [ 0.008231] Initializing cgroup subsys freezer
- [ 0.008366] CPU: Physical Processor ID: 0
- [ 0.008485] CPU: Processor Core ID: 0
- [ 0.009315] mce: CPU supports 9 MCE banks
- [ 0.009442] CPU0: Thermal monitoring enabled (TM1)
- [ 0.009570] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
- Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
- tlb_flushall_shift: 6
- [ 0.009899] Freeing SMP alternatives: 28k freed
- [ 0.010698] ACPI: Core revision 20130328
- [ 0.014892] ACPI: All ACPI Tables successfully acquired
- [ 0.025680] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.035974] smpboot: CPU0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (fam: 06, model: 3c, stepping: 03)
- [ 0.036653] TSC deadline timer enabled
- [ 0.036657] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
- [ 0.037334] ... version: 3
- [ 0.037619] ... bit width: 48
- [ 0.037904] ... generic registers: 4
- [ 0.038190] ... value mask: 0000ffffffffffff
- [ 0.038476] ... max period: 000000007fffffff
- [ 0.038766] ... fixed-purpose events: 3
- [ 0.039052] ... event mask: 000000070000000f
- [ 0.039454] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
- [ 0.137860] Brought up 8 CPUs
- [ 0.138146] smpboot: Total of 8 processors activated (54273.00 BogoMIPS)
- [ 0.144571] devtmpfs: initialized
- [ 0.144946] PM: Registering ACPI NVS region [mem 0x99498000-0x9949efff] (28672 bytes)
- [ 0.145467] PM: Registering ACPI NVS region [mem 0xaa5aa000-0xaa696fff] (970752 bytes)
- [ 0.146084] RTC time: 18:27:30, date: 02/06/14
- [ 0.146393] NET: Registered protocol family 16
- [ 0.146742] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.147254] ACPI: bus type PCI registered
- [ 0.153298] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.153796] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
- [ 0.157597] PCI: Using configuration type 1 for base access
- [ 0.158459] bio: create slab <bio-0> at 0
- [ 0.158801] ACPI: Added _OSI(Module Device)
- [ 0.159076] ACPI: Added _OSI(Processor Device)
- [ 0.159351] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.159626] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.160897] ACPI: EC: Look up EC in DSDT
- [ 0.162121] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.163903] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.168562] ACPI: SSDT 00000000aa59fc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.169410] ACPI: Dynamic OEM Table Load:
- [ 0.169788] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.174647] ACPI: SSDT 00000000aa59f618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
- [ 0.175536] ACPI: Dynamic OEM Table Load:
- [ 0.175913] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
- [ 0.180572] ACPI: SSDT 00000000aa59ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
- [ 0.181417] ACPI: Dynamic OEM Table Load:
- [ 0.181796] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
- [ 0.187570] ACPI: Interpreter enabled
- [ 0.187849] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
- [ 0.188452] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
- [ 0.189061] ACPI: (supports S0 S3 S4 S5)
- [ 0.189335] ACPI: Using IOAPIC for interrupt routing
- [ 0.189625] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.190204] ACPI: No dock devices found.
- [ 0.195082] ACPI: Power Resource [FN00] (off)
- [ 0.195395] ACPI: Power Resource [FN01] (off)
- [ 0.195705] ACPI: Power Resource [FN02] (off)
- [ 0.196011] ACPI: Power Resource [FN03] (off)
- [ 0.196317] ACPI: Power Resource [FN04] (off)
- [ 0.196975] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
- [ 0.197536] PCI host bridge to bus 0000:00
- [ 0.197813] pci_bus 0000:00: root bus resource [bus 00-3e]
- [ 0.198090] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.198367] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.198644] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.198924] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
- [ 0.199202] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
- [ 0.199480] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
- [ 0.199759] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
- [ 0.200038] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
- [ 0.200315] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
- [ 0.200595] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
- [ 0.200877] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
- [ 0.200926] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
- [ 0.200947] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.200976] pci 0000:00:01.0: System wakeup disabled by ACPI
- [ 0.201271] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
- [ 0.201278] pci 0000:00:02.0: reg 10: [mem 0xd3400000-0xd37fffff 64bit]
- [ 0.201282] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
- [ 0.201285] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
- [ 0.201330] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
- [ 0.201334] pci 0000:00:03.0: reg 10: [mem 0xd3914000-0xd3917fff 64bit]
- [ 0.201395] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
- [ 0.201410] pci 0000:00:14.0: reg 10: [mem 0xd3900000-0xd390ffff 64bit]
- [ 0.201458] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.201485] pci 0000:00:14.0: System wakeup disabled by ACPI
- [ 0.201776] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
- [ 0.201791] pci 0000:00:16.0: reg 10: [mem 0xd391f000-0xd391f00f 64bit]
- [ 0.201843] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.201883] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
- [ 0.201895] pci 0000:00:16.3: reg 10: [io 0xf0c0-0xf0c7]
- [ 0.201902] pci 0000:00:16.3: reg 14: [mem 0xd391d000-0xd391dfff]
- [ 0.201996] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
- [ 0.202013] pci 0000:00:1a.0: reg 10: [mem 0xd391c000-0xd391c3ff]
- [ 0.202086] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.202121] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 0.202415] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
- [ 0.202426] pci 0000:00:1b.0: reg 10: [mem 0xd3910000-0xd3913fff 64bit]
- [ 0.202478] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.202505] pci 0000:00:1b.0: System wakeup disabled by ACPI
- [ 0.202796] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
- [ 0.202848] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.202876] pci 0000:00:1c.0: System wakeup disabled by ACPI
- [ 0.203166] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
- [ 0.203218] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.203246] pci 0000:00:1c.2: System wakeup disabled by ACPI
- [ 0.203536] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
- [ 0.203588] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.203616] pci 0000:00:1c.3: System wakeup disabled by ACPI
- [ 0.203913] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
- [ 0.203929] pci 0000:00:1d.0: reg 10: [mem 0xd391b000-0xd391b3ff]
- [ 0.204002] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.204039] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.204331] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100
- [ 0.204454] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
- [ 0.204466] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
- [ 0.204471] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
- [ 0.204477] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
- [ 0.204482] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
- [ 0.204488] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
- [ 0.204493] pci 0000:00:1f.2: reg 24: [mem 0xd391a000-0xd391a7ff]
- [ 0.204522] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.204559] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
- [ 0.204571] pci 0000:00:1f.3: reg 10: [mem 0xd3919000-0xd39190ff 64bit]
- [ 0.204586] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
- [ 0.204653] pci 0000:01:00.0: [10de:0ffa] type 00 class 0x030000
- [ 0.204661] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
- [ 0.204669] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.204677] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
- [ 0.204683] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
- [ 0.204689] pci 0000:01:00.0: reg 30: [mem 0xd3000000-0xd307ffff pref]
- [ 0.204726] pci 0000:01:00.0: System wakeup disabled by ACPI
- [ 0.205020] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
- [ 0.205027] pci 0000:01:00.1: reg 10: [mem 0xd3080000-0xd3083fff]
- [ 0.206550] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.206826] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- [ 0.206828] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
- [ 0.206861] pci 0000:00:1c.0: PCI bridge to [bus 02]
- [ 0.207188] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.207203] pci 0000:03:00.0: reg 10: [io 0xd000-0xd0ff]
- [ 0.207228] pci 0000:03:00.0: reg 18: [mem 0xd3804000-0xd3804fff 64bit]
- [ 0.207243] pci 0000:03:00.0: reg 20: [mem 0xd3800000-0xd3803fff 64bit pref]
- [ 0.207311] pci 0000:03:00.0: supports D1 D2
- [ 0.207312] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.207334] pci 0000:03:00.0: System wakeup disabled by ACPI
- [ 0.209623] pci 0000:00:1c.2: PCI bridge to [bus 03]
- [ 0.209900] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- [ 0.209903] pci 0000:00:1c.2: bridge window [mem 0xd3800000-0xd38fffff]
- [ 0.209955] pci 0000:04:00.0: [8086:244e] type 01 class 0x060401
- [ 0.210078] pci 0000:04:00.0: supports D1 D2
- [ 0.210079] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.210099] pci 0000:04:00.0: System wakeup disabled by ACPI
- [ 0.210384] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
- [ 0.210670] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.210671] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.210672] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.210673] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
- [ 0.210674] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
- [ 0.210674] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
- [ 0.210675] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
- [ 0.210676] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
- [ 0.210677] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
- [ 0.210678] pci 0000:00:1c.3: bridge window [mem 0xafa00000-0xfeafffff] (subtractive decode)
- [ 0.210800] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
- [ 0.211097] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
- [ 0.211098] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
- [ 0.211099] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
- [ 0.211100] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
- [ 0.211101] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.211102] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.211102] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.211103] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
- [ 0.211104] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
- [ 0.211105] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
- [ 0.211106] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
- [ 0.211107] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
- [ 0.211108] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
- [ 0.211108] pci 0000:04:00.0: bridge window [mem 0xafa00000-0xfeafffff] (subtractive decode)
- [ 0.211174] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
- [ 0.211555] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
- [ 0.212302] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.213171] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.214038] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.214903] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
- [ 0.215769] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.216956] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.218145] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.219009] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
- [ 0.220066] ACPI: Enabled 4 GPEs in block 00 to 3F
- [ 0.220447] acpi root: \_SB_.PCI0 notify handler is installed
- [ 0.220484] Found 1 acpi root devices
- [ 0.220515] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=mem,locks=none
- [ 0.221013] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.221511] vgaarb: loaded
- [ 0.221783] vgaarb: bridge control possible 0000:01:00.0
- [ 0.222058] vgaarb: no bridge control possible 0000:00:02.0
- [ 0.222365] SCSI subsystem initialized
- [ 0.222640] ACPI: bus type ATA registered
- [ 0.222933] libata version 3.00 loaded.
- [ 0.222943] ACPI: bus type USB registered
- [ 0.223223] usbcore: registered new interface driver usbfs
- [ 0.223502] usbcore: registered new interface driver hub
- [ 0.223787] usbcore: registered new device driver usb
- [ 0.224069] pps_core: LinuxPPS API ver. 1 registered
- [ 0.224345] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.224844] PTP clock support registered
- [ 0.225138] wmi: Mapper loaded
- [ 0.225415] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.225692] PCI: Using ACPI for IRQ routing
- [ 0.227105] PCI: pci_cache_line_size set to 64 bytes
- [ 0.227141] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
- [ 0.227142] e820: reserve RAM buffer [mem 0x99498000-0x9bffffff]
- [ 0.227143] e820: reserve RAM buffer [mem 0x99d58000-0x9bffffff]
- [ 0.227143] e820: reserve RAM buffer [mem 0xa9fc8000-0xabffffff]
- [ 0.227144] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
- [ 0.227145] e820: reserve RAM buffer [mem 0x84e600000-0x84fffffff]
- [ 0.227214] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.227283] NetLabel: Initializing
- [ 0.227283] NetLabel: domain hash size = 128
- [ 0.227283] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.227295] NetLabel: unlabeled traffic allowed by default
- [ 0.227337] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.227337] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.229353] Switching to clocksource hpet
- [ 0.232404] pnp: PnP ACPI init
- [ 0.232679] ACPI: bus type PNP registered
- [ 0.232991] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
- [ 0.233270] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.233276] pnp 00:01: [dma 4]
- [ 0.233281] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.233288] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.233336] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.233391] system 00:04: [io 0x0680-0x069f] has been reserved
- [ 0.233668] system 00:04: [io 0xffff] has been reserved
- [ 0.233948] system 00:04: [io 0xffff] has been reserved
- [ 0.234224] system 00:04: [io 0xffff] has been reserved
- [ 0.234499] system 00:04: [io 0x1c00-0x1cfe] has been reserved
- [ 0.234776] system 00:04: [io 0x1d00-0x1dfe] has been reserved
- [ 0.235056] system 00:04: [io 0x1e00-0x1efe] has been reserved
- [ 0.235333] system 00:04: [io 0x1f00-0x1ffe] has been reserved
- [ 0.235609] system 00:04: [io 0x1800-0x18fe] has been reserved
- [ 0.235886] system 00:04: [io 0x164e-0x164f] has been reserved
- [ 0.236166] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.236178] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.236198] system 00:06: [io 0x1854-0x1857] has been reserved
- [ 0.236476] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.236538] system 00:07: [io 0x0a00-0x0a0f] has been reserved
- [ 0.236815] system 00:07: [io 0x0a30-0x0a3f] has been reserved
- [ 0.237095] system 00:07: [io 0x0a20-0x0a2f] has been reserved
- [ 0.237373] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.237403] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
- [ 0.237531] pnp 00:09: [dma 0 disabled]
- [ 0.237551] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.237712] pnp 00:0a: [dma 0 disabled]
- [ 0.237769] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
- [ 0.237791] system 00:0b: [io 0x04d0-0x04d1] has been reserved
- [ 0.238072] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.238082] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.238304] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.238582] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.238860] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.239141] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.239419] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 0.239697] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.239978] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.240255] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 0.240533] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.240811] system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.241092] system 00:0d: [mem 0xf7ffe000-0xf7ffefff] has been reserved
- [ 0.241370] system 00:0d: [mem 0xf7fe0000-0xf7fe0fff] has been reserved
- [ 0.241647] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.241786] pnp: PnP ACPI: found 14 devices
- [ 0.242062] ACPI: bus type PNP unregistered
- [ 0.246890] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.247169] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- [ 0.247447] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
- [ 0.247727] pci 0000:00:1c.0: PCI bridge to [bus 02]
- [ 0.248012] pci 0000:00:1c.2: PCI bridge to [bus 03]
- [ 0.248288] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- [ 0.248567] pci 0000:00:1c.2: bridge window [mem 0xd3800000-0xd38fffff]
- [ 0.248849] pci 0000:04:00.0: PCI bridge to [bus 05]
- [ 0.249144] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
- [ 0.249573] pci 0000:04:00.0: setting latency timer to 64
- [ 0.249577] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.249578] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.249578] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.249579] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
- [ 0.249580] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
- [ 0.249581] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
- [ 0.249582] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
- [ 0.249583] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
- [ 0.249583] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
- [ 0.249584] pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
- [ 0.249585] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
- [ 0.249586] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
- [ 0.249587] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
- [ 0.249588] pci_bus 0000:03: resource 1 [mem 0xd3800000-0xd38fffff]
- [ 0.249589] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
- [ 0.249590] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
- [ 0.249590] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.249591] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
- [ 0.249592] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
- [ 0.249593] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
- [ 0.249594] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
- [ 0.249595] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
- [ 0.249595] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
- [ 0.249596] pci_bus 0000:04: resource 13 [mem 0xafa00000-0xfeafffff]
- [ 0.249597] pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7]
- [ 0.249598] pci_bus 0000:05: resource 9 [io 0x0d00-0xffff]
- [ 0.249599] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
- [ 0.249600] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
- [ 0.249600] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
- [ 0.249601] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
- [ 0.249602] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
- [ 0.249603] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
- [ 0.249604] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
- [ 0.249605] pci_bus 0000:05: resource 17 [mem 0xafa00000-0xfeafffff]
- [ 0.249620] NET: Registered protocol family 2
- [ 0.250102] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- [ 0.251028] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.251411] TCP: Hash tables configured (established 262144 bind 65536)
- [ 0.251699] TCP: reno registered
- [ 0.251994] UDP hash table entries: 16384 (order: 7, 524288 bytes)
- [ 0.252343] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
- [ 0.252708] NET: Registered protocol family 1
- [ 0.253030] RPC: Registered named UNIX socket transport module.
- [ 0.253307] RPC: Registered udp transport module.
- [ 0.253582] RPC: Registered tcp transport module.
- [ 0.253857] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.254142] pci 0000:00:02.0: Boot video device
- [ 0.255461] pci 0000:00:14.0: Configurable ports to enable SuperSpeed: 0x3f
- [ 0.255463] pci 0000:00:14.0: USB 3.0 ports that are now enabled under xHCI: 0x3f
- [ 0.255464] pci 0000:00:14.0: Configurable USB 2.0 ports to hand over to xCHI: 0x3fff
- [ 0.255467] pci 0000:00:14.0: USB 2.0 ports that are now switched over to xHCI: 0x3fff
- [ 0.255690] pci 0000:01:00.0: Boot video device
- [ 0.255703] PCI: CLS 64 bytes, default 64
- [ 0.255728] dmar: Host address width 39
- [ 0.256010] dmar: DRHD base: 0x000000fed90000 flags: 0x0
- [ 0.256292] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
- [ 0.256789] dmar: DRHD base: 0x000000fed91000 flags: 0x1
- [ 0.257071] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
- [ 0.257568] dmar: RMRR base: 0x000000aa21d000 end: 0x000000aa229fff
- [ 0.257846] dmar: RMRR base: 0x000000ab800000 end: 0x000000af9fffff
- [ 0.258128] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.258406] software IO TLB [mem 0xa5fc8000-0xa9fc8000] (64MB) mapped at [ffff8800a5fc8000-ffff8800a9fc7fff]
- [ 0.259217] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
- [ 0.259497] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
- [ 0.259777] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
- [ 0.265576] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
- [ 0.265856] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x9
- [ 0.266141] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x9
- [ 0.266423] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x9
- [ 0.266703] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x9
- [ 0.266999] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.267497] Scanning for low memory corruption every 60 seconds
- [ 0.267842] audit: initializing netlink socket (disabled)
- [ 0.268133] type=2000 audit(1391711250.233:1): initialized
- [ 0.278395] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.279182] VFS: Disk quotas dquot_6.5.2
- [ 0.279475] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.280015] NFS: Registering the id_resolver key type
- [ 0.280297] Key type id_resolver registered
- [ 0.280572] Key type id_legacy registered
- [ 0.280849] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.281163] fuse init (API version 7.22)
- [ 0.281491] msgmni has been set to 32768
- [ 0.281792] SELinux: Registering netfilter hooks
- [ 0.281881] cryptomgr_test (55) used greatest stack depth: 6832 bytes left
- [ 0.282205] cryptomgr_test (57) used greatest stack depth: 6816 bytes left
- [ 0.282559] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.283075] io scheduler noop registered
- [ 0.283350] io scheduler deadline registered
- [ 0.283636] io scheduler cfq registered (default)
- [ 0.283952] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 0.284023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.284314] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.305134] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.325854] 0000:00:16.3: ttyS1 at I/O 0xf0c0 (irq = 19) is a 16550A
- [ 0.326263] Non-volatile memory driver v1.3
- [ 0.326537] Linux agpgart interface v0.103
- [ 0.326850] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.327371] ACPI: Power Button [PWRB]
- [ 0.327657] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.328173] ACPI: Power Button [PWRF]
- [ 0.328468] ACPI: Fan [FAN0] (off)
- [ 0.328750] ACPI: Fan [FAN1] (off)
- [ 0.329051] ACPI: Fan [FAN2] (off)
- [ 0.329332] ACPI: Fan [FAN3] (off)
- [ 0.329614] ACPI: Fan [FAN4] (off)
- [ 0.329914] ACPI: Requesting acpi_cpufreq
- [ 0.330246] kworker/u16:0 (65) used greatest stack depth: 6728 bytes left
- [ 0.330413] Monitor-Mwait will be used to enter C-1 state
- [ 0.330426] Monitor-Mwait will be used to enter C-2 state
- [ 0.330442] ACPI: acpi_idle registered with cpuidle
- [ 0.333040] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.333317] ACPI: Thermal Zone [TZ00] (28 C)
- [ 0.333699] thermal LNXTHERM:01: registered as thermal_zone1
- [ 0.333987] ACPI: Thermal Zone [TZ01] (30 C)
- [ 0.334271] [drm] Initialized drm 1.1.0 20060810
- [ 0.334799] loop: module loaded
- [ 0.335110] ahci 0000:00:1f.2: version 3.0
- [ 0.335160] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
- [ 0.335195] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
- [ 0.335693] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
- [ 0.336195] ahci 0000:00:1f.2: setting latency timer to 64
- [ 0.340089] scsi0 : ahci
- [ 0.340390] scsi1 : ahci
- [ 0.340684] scsi2 : ahci
- [ 0.340984] scsi3 : ahci
- [ 0.341278] scsi4 : ahci
- [ 0.341572] scsi5 : ahci
- [ 0.341885] ata1: SATA max UDMA/133 abar m2048@0xd391a000 port 0xd391a100 irq 41
- [ 0.342385] ata2: SATA max UDMA/133 abar m2048@0xd391a000 port 0xd391a180 irq 41
- [ 0.342881] ata3: SATA max UDMA/133 abar m2048@0xd391a000 port 0xd391a200 irq 41
- [ 0.343378] ata4: DUMMY
- [ 0.343650] ata5: DUMMY
- [ 0.343921] ata6: DUMMY
- [ 0.344269] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.344564] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
- [ 0.344570] ehci-pci: EHCI PCI platform driver
- [ 0.344897] ehci-pci 0000:00:1a.0: setting latency timer to 64
- [ 0.344901] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 0.345203] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 0.345706] ehci-pci 0000:00:1a.0: debug port 2
- [ 0.345995] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
- [ 0.345997] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 0.346008] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.349901] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 0.349902] ehci-pci 0000:00:1a.0: supports USB remote wakeup
- [ 0.349911] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd391c000
- [ 0.350193] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.355983] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 0.356271] usb usb1: default language 0x0409
- [ 0.356274] usb usb1: udev 1, busnum 1, minor = 0
- [ 0.356275] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.356552] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.357052] usb usb1: Product: EHCI Host Controller
- [ 0.357328] usb usb1: Manufacturer: Linux 3.10.25-gentoo ehci_hcd
- [ 0.357605] usb usb1: SerialNumber: 0000:00:1a.0
- [ 0.357911] usb usb1: usb_probe_device
- [ 0.357913] usb usb1: configuration #1 chosen from 1 choice
- [ 0.357916] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 0.357924] hub 1-0:1.0: usb_probe_interface
- [ 0.357924] hub 1-0:1.0: usb_probe_interface - got id
- [ 0.357925] hub 1-0:1.0: USB hub found
- [ 0.358206] hub 1-0:1.0: 2 ports detected
- [ 0.358480] hub 1-0:1.0: standalone hub
- [ 0.358481] hub 1-0:1.0: no power switching (usb 1.0)
- [ 0.358482] hub 1-0:1.0: individual port over-current protection
- [ 0.358482] hub 1-0:1.0: power on to power good time: 20ms
- [ 0.358484] hub 1-0:1.0: local power source is good
- [ 0.358509] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information.
- [ 0.358510] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 0.358564] ehci-pci 0000:00:1d.0: setting latency timer to 64
- [ 0.358567] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 0.358860] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.359369] ehci-pci 0000:00:1d.0: debug port 2
- [ 0.359646] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
- [ 0.359648] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 0.359656] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.363549] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 0.363550] ehci-pci 0000:00:1d.0: supports USB remote wakeup
- [ 0.363557] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd391b000
- [ 0.363836] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.368989] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 0.369273] usb usb2: default language 0x0409
- [ 0.369275] usb usb2: udev 1, busnum 2, minor = 128
- [ 0.369276] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.369554] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.370052] usb usb2: Product: EHCI Host Controller
- [ 0.370327] usb usb2: Manufacturer: Linux 3.10.25-gentoo ehci_hcd
- [ 0.370605] usb usb2: SerialNumber: 0000:00:1d.0
- [ 0.370906] usb usb2: usb_probe_device
- [ 0.370907] usb usb2: configuration #1 chosen from 1 choice
- [ 0.370909] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 0.370915] hub 2-0:1.0: usb_probe_interface
- [ 0.370916] hub 2-0:1.0: usb_probe_interface - got id
- [ 0.370917] hub 2-0:1.0: USB hub found
- [ 0.371197] hub 2-0:1.0: 2 ports detected
- [ 0.371471] hub 2-0:1.0: standalone hub
- [ 0.371471] hub 2-0:1.0: no power switching (usb 1.0)
- [ 0.371472] hub 2-0:1.0: individual port over-current protection
- [ 0.371473] hub 2-0:1.0: power on to power good time: 20ms
- [ 0.371474] hub 2-0:1.0: local power source is good
- [ 0.371495] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information.
- [ 0.371496] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 0.371513] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.371790] ohci_hcd: block sizes: ed 80 td 96
- [ 0.371796] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.372137] xhci_hcd 0000:00:14.0: setting latency timer to 64
- [ 0.372138] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.372429] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
- [ 0.372994] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- [ 0.372995] xhci_hcd 0000:00:14.0: supports USB remote wakeup
- [ 0.373007] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
- [ 0.373033] usb usb3: default language 0x0409
- [ 0.373036] usb usb3: udev 1, busnum 3, minor = 256
- [ 0.373036] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.373315] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.373809] usb usb3: Product: xHCI Host Controller
- [ 0.374090] usb usb3: Manufacturer: Linux 3.10.25-gentoo xhci_hcd
- [ 0.374368] usb usb3: SerialNumber: 0000:00:14.0
- [ 0.374668] usb usb3: usb_probe_device
- [ 0.374669] usb usb3: configuration #1 chosen from 1 choice
- [ 0.374670] xHCI xhci_add_endpoint called for root hub
- [ 0.374671] xHCI xhci_check_bandwidth called for root hub
- [ 0.374673] usb usb3: adding 3-0:1.0 (config #1, interface 0)
- [ 0.374679] hub 3-0:1.0: usb_probe_interface
- [ 0.374680] hub 3-0:1.0: usb_probe_interface - got id
- [ 0.374681] hub 3-0:1.0: USB hub found
- [ 0.374965] hub 3-0:1.0: 12 ports detected
- [ 0.375244] hub 3-0:1.0: standalone hub
- [ 0.375244] hub 3-0:1.0: no power switching (usb 1.0)
- [ 0.375245] hub 3-0:1.0: individual port over-current protection
- [ 0.375246] hub 3-0:1.0: Single TT
- [ 0.375247] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 0.375247] hub 3-0:1.0: power on to power good time: 20ms
- [ 0.375249] hub 3-0:1.0: local power source is good
- [ 0.376307] hub 3-0:1.0: trying to enable port power on non-switchable hub
- [ 0.376348] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.376642] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
- [ 0.377147] xhci_hcd 0000:00:14.0: supports USB remote wakeup
- [ 0.377158] usb usb4: skipped 1 descriptor after endpoint
- [ 0.377160] usb usb4: default language 0x0409
- [ 0.377163] usb usb4: udev 1, busnum 4, minor = 384
- [ 0.377163] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
- [ 0.377441] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.377936] usb usb4: Product: xHCI Host Controller
- [ 0.378224] usb usb4: Manufacturer: Linux 3.10.25-gentoo xhci_hcd
- [ 0.378501] usb usb4: SerialNumber: 0000:00:14.0
- [ 0.378799] usb usb4: usb_probe_device
- [ 0.378800] usb usb4: configuration #1 chosen from 1 choice
- [ 0.378801] xHCI xhci_add_endpoint called for root hub
- [ 0.378802] xHCI xhci_check_bandwidth called for root hub
- [ 0.378804] usb usb4: adding 4-0:1.0 (config #1, interface 0)
- [ 0.378812] hub 4-0:1.0: usb_probe_interface
- [ 0.378813] hub 4-0:1.0: usb_probe_interface - got id
- [ 0.378814] hub 4-0:1.0: USB hub found
- [ 0.379101] hub 4-0:1.0: 6 ports detected
- [ 0.379375] hub 4-0:1.0: standalone hub
- [ 0.379375] hub 4-0:1.0: no power switching (usb 1.0)
- [ 0.379376] hub 4-0:1.0: individual port over-current protection
- [ 0.379377] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 0.379377] hub 4-0:1.0: power on to power good time: 20ms
- [ 0.379379] hub 4-0:1.0: local power source is good
- [ 0.379896] hub 4-0:1.0: trying to enable port power on non-switchable hub
- [ 0.389016] usbcore: registered new interface driver usblp
- [ 0.389302] usbcore: registered new interface driver usb-storage
- [ 0.389589] usbcore: registered new interface driver usbserial
- [ 0.389879] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
- [ 0.390161] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
- [ 0.390827] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.391108] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.391421] mousedev: PS/2 mouse device common for all mice
- [ 0.391766] rtc_cmos 00:05: RTC can wake from S4
- [ 0.392133] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 0.392430] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 0.392934] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
- [ 0.393254] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
- [ 0.393861] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 0.394434] cpuidle: using governor ladder
- [ 0.394762] cpuidle: using governor menu
- [ 0.395048] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
- [ 0.395167] usbcore: registered new interface driver vub300
- [ 0.395715] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.396058] usbcore: registered new interface driver usbhid
- [ 0.396335] usbhid: USB HID core driver
- [ 0.396621] hv_utils: Registering HyperV Utility Driver
- [ 0.396897] hv_vmbus: registering driver hv_util
- [ 0.397175] hv_vmbus: registering driver hv_balloon
- [ 0.397526] Netfilter messages via NETLINK v0.30.
- [ 0.397572] kworker/u16:6 (88) used greatest stack depth: 6312 bytes left
- [ 0.398113] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 0.398427] ctnetlink v0.93: registering with nfnetlink.
- [ 0.398752] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.399051] TCP: cubic registered
- [ 0.399324] Initializing XFRM netlink socket
- [ 0.399641] NET: Registered protocol family 10
- [ 0.400009] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.400301] sit: IPv6 over IPv4 tunneling driver
- [ 0.400625] NET: Registered protocol family 17
- [ 0.400909] Key type dns_resolver registered
- [ 0.401308] PM: Hibernation image not present or could not be loaded.
- [ 0.401312] registered taskstats version 1
- [ 0.401856] Magic number: 2:261:493
- [ 0.402168] console [netcon0] enabled
- [ 0.402441] netconsole: network logging started
- [ 0.403379] ALSA device list:
- [ 0.403652] No soundcards found.
- [ 0.458027] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.458029] hub 1-0:1.0: port 1: status 0501 change 0001
- [ 0.471031] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.471032] hub 2-0:1.0: port 1: status 0501 change 0001
- [ 0.476049] hub 3-0:1.0: port 3: status 0101 change 0001
- [ 0.476055] hub 3-0:1.0: port 7: status 0301 change 0001
- [ 0.476061] hub 3-0:1.0: port 12: status 0101 change 0001
- [ 0.558101] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
- [ 0.558105] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 0.609328] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
- [ 0.609330] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.649123] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.649414] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.649703] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.652193] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 0.652195] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 0.652691] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 0.656653] ata3.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LN00, max UDMA/133
- [ 0.660125] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 0.660937] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 0.660938] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 0.666927] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 0.667865] ata1.00: ATA-8: KINGSTON SV300S37A120G, 505ABBF1, max UDMA/133
- [ 0.668147] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 0.669757] ata3.00: configured for UDMA/133
- [ 0.672810] ata1.00: configured for UDMA/133
- [ 0.673221] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 505A PQ: 0 ANSI: 5
- [ 0.673812] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 0.673846] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- [ 0.674214] sd 0:0:0:0: [sda] Write Protect is off
- [ 0.674215] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.674318] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.675037] sda: sda1 sda2 sda3 sda4
- [ 0.675673] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 0.694030] ata2.00: ATA-7: ST3750640NS, 3.AEK, max UDMA/133
- [ 0.694309] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 0.711371] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
- [ 0.711373] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.752354] ata2.00: configured for UDMA/133
- [ 0.752760] scsi 1:0:0:0: Direct-Access ATA ST3750640NS 3.AE PQ: 0 ANSI: 5
- [ 0.753431] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 0.753712] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
- [ 0.754294] sd 1:0:0:0: [sdb] Write Protect is off
- [ 0.754569] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 0.754574] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.755874] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LN00 PQ: 0 ANSI: 5
- [ 0.762596] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 0.763091] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 0.763490] sr 2:0:0:0: Attached scsi CD-ROM sr0
- [ 0.763568] sr 2:0:0:0: Attached scsi generic sg2 type 5
- [ 0.774551] usb 1-1: udev 2, busnum 1, minor = 1
- [ 0.774553] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
- [ 0.774830] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 0.775192] usb 1-1: usb_probe_device
- [ 0.775193] usb 1-1: configuration #1 chosen from 1 choice
- [ 0.775303] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
- [ 0.775311] hub 1-1:1.0: usb_probe_interface
- [ 0.775311] hub 1-1:1.0: usb_probe_interface - got id
- [ 0.775312] hub 1-1:1.0: USB hub found
- [ 0.775676] hub 1-1:1.0: 6 ports detected
- [ 0.775950] hub 1-1:1.0: standalone hub
- [ 0.775950] hub 1-1:1.0: individual port power switching
- [ 0.775951] hub 1-1:1.0: individual port over-current protection
- [ 0.775952] hub 1-1:1.0: Single TT
- [ 0.775953] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 0.775953] hub 1-1:1.0: power on to power good time: 0ms
- [ 0.776154] hub 1-1:1.0: local power source is good
- [ 0.776251] hub 1-1:1.0: enabling power on all ports
- [ 0.776910] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
- [ 0.776933] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 0.792046] sdb: sdb1 sdb2
- [ 0.792419] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 0.827418] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
- [ 0.827420] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.834417] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
- [ 0.876948] usb 1-1: link qh256-0001/ffff880829b0d500 start 1 [1/0 us]
- [ 0.878202] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 0.929462] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
- [ 0.929463] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.992642] usb 2-1: udev 2, busnum 2, minor = 129
- [ 0.992643] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
- [ 0.992921] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 0.993282] usb 2-1: usb_probe_device
- [ 0.993283] usb 2-1: configuration #1 chosen from 1 choice
- [ 0.993394] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
- [ 0.993401] hub 2-1:1.0: usb_probe_interface
- [ 0.993402] hub 2-1:1.0: usb_probe_interface - got id
- [ 0.993403] hub 2-1:1.0: USB hub found
- [ 0.993767] hub 2-1:1.0: 6 ports detected
- [ 0.994045] hub 2-1:1.0: standalone hub
- [ 0.994045] hub 2-1:1.0: individual port power switching
- [ 0.994046] hub 2-1:1.0: individual port over-current protection
- [ 0.994047] hub 2-1:1.0: Single TT
- [ 0.994047] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 0.994048] hub 2-1:1.0: power on to power good time: 0ms
- [ 0.994245] hub 2-1:1.0: local power source is good
- [ 0.994358] hub 2-1:1.0: enabling power on all ports
- [ 0.995167] hub 3-0:1.0: state 7 ports 12 chg 1088 evt 0000
- [ 0.995174] hub 3-0:1.0: port 3, status 0101, change 0000, 12 Mb/s
- [ 1.046278] hub 3-0:1.0: port 3 not reset yet, waiting 50ms
- [ 1.068679] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
- [ 1.073690] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
- [ 1.074288] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities
- [ 1.075023] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
- [ 1.075308] EXT4-fs (sda3): write access will be enabled during recovery
- [ 1.079450] EXT4-fs (sda3): recovery complete
- [ 1.080183] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.080685] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
- [ 1.081460] Freeing unused kernel memory: 1548k freed
- [ 1.081830] Write protecting the kernel read-only data: 12288k
- [ 1.083087] Freeing unused kernel memory: 756k freed
- [ 1.085103] Freeing unused kernel memory: 1812k freed
- [ 1.095037] usb 2-1: link qh256-0001/ffff880829b07380 start 1 [1/0 us]
- [ 1.115420] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX +IMA -SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL -XZ)
- [ 1.118379] systemd[1]: Set hostname to <imix.baktun.net>.
- [ 1.121683] systemd-system- (99) used greatest stack depth: 4920 bytes left
- [ 1.122002] systemd-efi-boo (97) used greatest stack depth: 4632 bytes left
- [ 1.122360] systemd-getty-g (100) used greatest stack depth: 4600 bytes left
- [ 1.134114] gentoo-local-ge (95) used greatest stack depth: 3832 bytes left
- [ 1.148320] usb 3-3: new high-speed USB device number 2 using xhci_hcd
- [ 1.155418] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- [ 1.155939] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 1.156448] systemd[1]: Starting Remote File Systems.
- [ 1.157286] systemd[1]: Reached target Remote File Systems.
- [ 1.157571] systemd[1]: Starting Syslog Socket.
- [ 1.158419] systemd[1]: Listening on Syslog Socket.
- [ 1.158698] systemd[1]: Starting Delayed Shutdown Socket.
- [ 1.159551] systemd[1]: Listening on Delayed Shutdown Socket.
- [ 1.159831] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- [ 1.160682] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 1.160965] systemd[1]: Starting udev Kernel Socket.
- [ 1.161810] systemd[1]: Listening on udev Kernel Socket.
- [ 1.162091] systemd[1]: Starting udev Control Socket.
- [ 1.162935] systemd[1]: Listening on udev Control Socket.
- [ 1.163224] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
- [ 1.164333] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 1.164837] systemd[1]: Starting Journal Socket.
- [ 1.165684] systemd[1]: Listening on Journal Socket.
- [ 1.165965] systemd[1]: Starting Setup Virtual Console...
- [ 1.166838] systemd[1]: Mounting Huge Pages File System...
- [ 1.169273] systemd[1]: Starting Load Kernel Modules...
- [ 1.170173] systemd[1]: Mounting POSIX Message Queue File System...
- [ 1.170746] usb 3-3: default language 0x0409
- [ 1.170939] usb 3-3: udev 2, busnum 3, minor = 257
- [ 1.170940] usb 3-3: New USB device found, idVendor=0cf3, idProduct=9271
- [ 1.170941] usb 3-3: New USB device strings: Mfr=16, Product=32, SerialNumber=48
- [ 1.170941] usb 3-3: Product: UB91C
- [ 1.170942] usb 3-3: Manufacturer: ATHEROS
- [ 1.170942] usb 3-3: SerialNumber: 12345
- [ 1.171000] usb 3-3: usb_probe_device
- [ 1.171001] usb 3-3: configuration #1 chosen from 1 choice
- [ 1.171423] usb 3-3: Successful Endpoint Configure command
- [ 1.171942] usb 3-3: adding 3-3:1.0 (config #1, interface 0)
- [ 1.171987] hub 3-0:1.0: port 7, status 0301, change 0000, 1.5 Mb/s
- [ 1.174351] systemd[1]: Starting Apply Kernel Variables...
- [ 1.175328] systemd[1]: Starting udev Coldplug all Devices...
- [ 1.176978] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 1.178187] systemd[1]: Mounting Debug File System...
- [ 1.179985] systemd[1]: Started Set Up Additional Binary Formats.
- [ 1.180282] systemd[1]: Starting Journal Service...
- [ 1.181873] systemd[1]: Started Journal Service.
- [ 1.185182] systemd-journald[119]: Vacuuming done, freed 0 bytes
- [ 1.186660] snd_hda_intel 0000:00:03.0: irq 43 for MSI/MSI-X
- [ 1.193289] hda_codec: invalid CONNECT_LIST verb 5[1]:0
- [ 1.193708] hda_codec: invalid CONNECT_LIST verb 6[1]:0
- [ 1.194060] hda_codec: invalid CONNECT_LIST verb 7[1]:0
- [ 1.194675] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input3
- [ 1.195262] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input4
- [ 1.195915] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5
- [ 1.197042] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
- [ 1.220295] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
- [ 1.220931] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
- [ 1.221535] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
- [ 1.221575] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
- [ 1.221614] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
- [ 1.221647] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
- [ 1.221675] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
- [ 1.221707] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
- [ 1.222114] hda_intel: Disabling MSI
- [ 1.222738] hub 3-0:1.0: port 7 not reset yet, waiting 50ms
- [ 1.234927] systemd-udevd[148]: starting version 208
- [ 1.261355] tsc: Refined TSC clocksource calibration: 3392.145 MHz
- [ 1.261663] Switching to clocksource tsc
- [ 1.284903] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 1.285417] r8169 0000:03:00.0: irq 45 for MSI/MSI-X
- [ 1.285521] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90003044000, 74:d4:35:0b:07:7b, XID 0c900800 IRQ 45
- [ 1.286024] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 1.289609] ath9k_htc 3-3:1.0: usb_probe_interface
- [ 1.289611] ath9k_htc 3-3:1.0: usb_probe_interface - got id
- [ 1.289614] usb 3-3: ath9k_htc: Firmware htc_9271.fw requested
- [ 1.290110] usbcore: registered new interface driver ath9k_htc
- [ 1.304440] systemd-udevd[153]: renamed network interface eth0 to enp3s0
- [ 1.324393] usb 3-7: new low-speed USB device number 3 using xhci_hcd
- [ 1.324764] nvidia: module license 'NVIDIA' taints kernel.
- [ 1.325045] Disabling lock debugging due to kernel taint
- [ 1.349766] usb 3-7: skipped 1 descriptor after interface
- [ 1.349768] usb 3-7: skipped 1 descriptor after interface
- [ 1.351120] usb 3-7: default language 0x0409
- [ 1.356303] usb 3-7: udev 3, busnum 3, minor = 258
- [ 1.356305] usb 3-7: New USB device found, idVendor=04d9, idProduct=1603
- [ 1.356625] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.356904] usb 3-7: Product: USB Keyboard
- [ 1.357177] usb 3-7: Manufacturer:
- [ 1.357538] usb 3-7: usb_probe_device
- [ 1.357539] usb 3-7: configuration #1 chosen from 1 choice
- [ 1.357560] usb 3-7: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 1.358065] usb 3-7: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 1.358462] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
- [ 1.358531] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
- [ 1.358929] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 1.358929] vgaarb: transferring owner from PCI:0000:01:00.0 to PCI:0000:00:02.0
- [ 1.359031] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
- [ 1.359035] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
- [ 1.361943] usb 3-7: Successful Endpoint Configure command
- [ 1.362804] usb 3-7: adding 3-7:1.0 (config #1, interface 0)
- [ 1.362838] usbhid 3-7:1.0: usb_probe_interface
- [ 1.362839] usbhid 3-7:1.0: usb_probe_interface - got id
- [ 1.365034] usbcore: registered new interface driver rt2800usb
- [ 1.370577] vboxdrv: Found 8 processor cores.
- [ 1.371187] vboxdrv: fAsync=0 offMin=0x259 offMax=0x2b7ad
- [ 1.371553] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
- [ 1.372098] vboxdrv: Successfully loaded version 4.3.6 (interface 0x001a0007).
- [ 1.372216] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input16
- [ 1.372786] hid-generic 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-7/input0
- [ 1.373303] usb 3-7: adding 3-7:1.1 (config #1, interface 1)
- [ 1.373325] usbhid 3-7:1.1: usb_probe_interface
- [ 1.373326] usbhid 3-7:1.1: usb_probe_interface - got id
- [ 1.389215] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.1/input/input17
- [ 1.389814] hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-7/input1
- [ 1.390364] hub 3-0:1.0: port 12, status 0101, change 0000, 12 Mb/s
- [ 1.441435] hub 3-0:1.0: port 12 not reset yet, waiting 50ms
- [ 1.528890] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
- [ 1.533008] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: errors=remount-ro
- [ 1.544462] usb 3-12: new high-speed USB device number 4 using xhci_hcd
- [ 1.575125] usb 3-3: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
- [ 1.762026] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.766721] systemd-journald[119]: Received request to flush runtime journal from PID 1
- [ 1.769353] systemd-journald[119]: File /var/log/journal/12775fe0aa0f14f8224bc05552ee1473/system.journal corrupted or uncleanly shut down, renaming and replacing.
- [ 1.812555] ath9k_htc 3-3:1.0: ath9k_htc: HTC initialized with 33 credits
- [ 2.008560] nvidia 0000:01:00.0: irq 46 for MSI/MSI-X
- [ 2.085535] ath9k_htc 3-3:1.0: ath9k_htc: FW Version: 1.3
- [ 2.085538] ath: EEPROM regdomain: 0x833a
- [ 2.085538] ath: EEPROM indicates we should expect a country code
- [ 2.085540] ath: doing EEPROM country->regdmn map search
- [ 2.085540] ath: country maps to regdmn code: 0x37
- [ 2.085541] ath: Country alpha2 being used: GB
- [ 2.085541] ath: Regpair used: 0x37
- [ 2.089734] ieee80211 phy0: Atheros AR9271 Rev:1
- [ 2.785856] systemd-journald[119]: File /var/log/journal/12775fe0aa0f14f8224bc05552ee1473/user-105.journal corrupted or uncleanly shut down, renaming and replacing.
- [ 2.828366] usb 3-12: default language 0x0409
- [ 2.828719] usb 3-12: udev 4, busnum 3, minor = 259
- [ 2.828721] usb 3-12: New USB device found, idVendor=125f, idProduct=a93a
- [ 2.828722] usb 3-12: New USB device strings: Mfr=1, Product=3, SerialNumber=2
- [ 2.828724] usb 3-12: Product: Portable HDD SH93
- [ 2.828724] usb 3-12: Manufacturer: ADATA
- [ 2.828725] usb 3-12: SerialNumber: 024000002B82
- [ 2.828796] usb 3-12: usb_probe_device
- [ 2.828797] usb 3-12: configuration #1 chosen from 1 choice
- [ 2.828989] usb 3-12: Successful Endpoint Configure command
- [ 2.829030] usb 3-12: adding 3-12:1.0 (config #1, interface 0)
- [ 2.829062] usb-storage 3-12:1.0: usb_probe_interface
- [ 2.829064] usb-storage 3-12:1.0: usb_probe_interface - got id
- [ 2.829065] usb-storage 3-12:1.0: USB Mass Storage device detected
- [ 2.829100] scsi6 : usb-storage 3-12:1.0
- [ 2.829147] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000
- [ 2.829150] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000
- [ 2.829151] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0000
- [ 2.848102] systemd-udevd[150]: renamed network interface wlan0 to wlp0s20u3
- [ 3.830702] scsi 6:0:0:0: Direct-Access ADATA HDD SH93 PQ: 0 ANSI: 0
- [ 3.830873] sd 6:0:0:0: Attached scsi generic sg3 type 0
- [ 3.831013] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 3.831129] sd 6:0:0:0: [sdc] Write Protect is off
- [ 3.831131] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
- [ 3.831252] sd 6:0:0:0: [sdc] No Caching mode page found
- [ 3.831253] sd 6:0:0:0: [sdc] Assuming drive cache: write through
- [ 3.832164] sd 6:0:0:0: [sdc] No Caching mode page found
- [ 3.832165] sd 6:0:0:0: [sdc] Assuming drive cache: write through
- [ 3.890467] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
- [ 3.891202] sd 6:0:0:0: [sdc] No Caching mode page found
- [ 3.891205] sd 6:0:0:0: [sdc] Assuming drive cache: write through
- [ 3.891207] sd 6:0:0:0: [sdc] Attached SCSI disk
- [ 8.323676] hub 3-0:1.0: state 7 ports 12 chg 0000 evt 0400
- [ 8.323683] hub 3-0:1.0: port 10, status 0101, change 0001, 12 Mb/s
- [ 8.453374] hub 3-0:1.0: debounce: port 10: total 125ms stable 100ms status 0x100
- [ 8.453376] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0040
- [ 8.453381] hub 4-0:1.0: port 6, status 0203, change 0001, 5.0 Gb/s
- [ 8.557413] hub 4-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x203
- [ 8.659512] usb 4-6: new SuperSpeed USB device number 2 using xhci_hcd
- [ 8.671188] usb 4-6: skipped 1 descriptor after endpoint
- [ 8.671189] usb 4-6: skipped 1 descriptor after endpoint
- [ 8.671190] usb 4-6: skipped 2 descriptors after endpoint
- [ 8.671191] usb 4-6: skipped 2 descriptors after endpoint
- [ 8.671191] usb 4-6: skipped 2 descriptors after endpoint
- [ 8.671192] usb 4-6: skipped 2 descriptors after endpoint
- [ 8.671270] usb 4-6: default language 0x0409
- [ 8.671632] usb 4-6: udev 2, busnum 4, minor = 385
- [ 8.671634] usb 4-6: New USB device found, idVendor=0bc2, idProduct=3312
- [ 8.671635] usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 8.671636] usb 4-6: Product: Expansion Desk
- [ 8.671637] usb 4-6: Manufacturer: Seagate
- [ 8.671637] usb 4-6: SerialNumber: 2HC015KJ
- [ 8.671677] usb 4-6: usb_probe_device
- [ 8.671678] usb 4-6: configuration #1 chosen from 1 choice
- [ 8.671878] usb 4-6: Successful Endpoint Configure command
- [ 8.671995] usb 4-6: Successful evaluate context command
- [ 8.672115] usb 4-6: Successful evaluate context command
- [ 8.672155] usb 4-6: adding 4-6:1.0 (config #1, interface 0)
- [ 8.672171] usb-storage 4-6:1.0: usb_probe_interface
- [ 8.672173] usb-storage 4-6:1.0: usb_probe_interface - got id
- [ 8.672281] usb 4-6: Successful evaluate context command
- [ 8.672282] usb-storage 4-6:1.0: USB Mass Storage device detected
- [ 8.672389] scsi7 : usb-storage 4-6:1.0
- [ 8.672488] usb 4-6: Successful evaluate context command
- [ 8.672623] usb 4-6: Successful evaluate context command
- [ 8.672691] hub 3-0:1.0: state 7 ports 12 chg 0000 evt 0400
- [ 8.672694] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0040
- [ 9.673918] scsi 7:0:0:0: Direct-Access Seagate Expansion Desk 0740 PQ: 0 ANSI: 6
- [ 9.674020] sd 7:0:0:0: Attached scsi generic sg4 type 0
- [ 9.674930] sd 7:0:0:0: [sdd] Spinning up disk...
- [ 13.988913] systemd-journald[119]: File /var/log/journal/12775fe0aa0f14f8224bc05552ee1473/user-1001.journal corrupted or uncleanly shut down, renaming and replacing.
- [ 16.174692] EXT4-fs (sdc2): recovery complete
- [ 16.215772] EXT4-fs (sdc3): recovery complete
- [ 16.222744] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
- [ 16.257089] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
- [ 16.258765] EXT4-fs (sdc6): recovery complete
- [ 16.330881] EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null)
- [ 15.130140] ...ready
- [ 17.134420] sd 7:0:0:0: [sdd] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 17.134956] sd 7:0:0:0: [sdd] Write Protect is off
- [ 17.134957] sd 7:0:0:0: [sdd] Mode Sense: 2b 00 10 08
- [ 17.135478] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 17.147657] sdd: sdd1
- [ 17.149433] sd 7:0:0:0: [sdd] Attached SCSI disk
- [ 17.548278] EXT4-fs (sdd1): recovery complete
- [ 17.548447] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
- [ 35.300940] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u3: link is not ready
- [ 35.416729] r8169 0000:03:00.0 enp3s0: link down
- [ 35.416757] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
- [ 38.078956] wlp0s20u3: authenticate with 00:24:17:85:c8:bf
- [ 38.363583] wlp0s20u3: send auth to 00:24:17:85:c8:bf (try 1/3)
- [ 38.366181] wlp0s20u3: authenticated
- [ 38.366224] ath9k_htc 3-3:1.0 wlp0s20u3: disabling HT/VHT due to WEP/TKIP use
- [ 38.366226] ath9k_htc 3-3:1.0 wlp0s20u3: disabling HT as WMM/QoS is not supported by the AP
- [ 38.366227] ath9k_htc 3-3:1.0 wlp0s20u3: disabling VHT as WMM/QoS is not supported by the AP
- [ 38.366892] wlp0s20u3: associate with 00:24:17:85:c8:bf (try 1/3)
- [ 38.369090] wlp0s20u3: RX AssocResp from 00:24:17:85:c8:bf (capab=0x411 status=0 aid=2)
- [ 38.378714] wlp0s20u3: associated
- [ 38.378718] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u3: link becomes ready
- [ 68.425301] wlp0s20u3: deauthenticating from 00:24:17:85:c8:bf by local choice (reason=3)
- [ 68.445084] cfg80211: Calling CRDA for country: GB
- [ 68.585092] cfg80211: Regulatory domain changed to country: GB
- [ 68.585094] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 68.585095] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 68.585096] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 68.585096] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 68.585097] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [ 68.585098] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 68.585103] cfg80211: Calling CRDA to update world regulatory domain
- [ 68.586294] cfg80211: World regulatory domain updated:
- [ 68.586296] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 68.586297] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 68.586298] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 68.586299] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 68.586299] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 68.586300] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 73.595894] wlp0s20u3: authenticate with 00:24:17:85:c8:bf
- [ 73.880819] wlp0s20u3: send auth to 00:24:17:85:c8:bf (try 1/3)
- [ 73.882811] wlp0s20u3: authenticated
- [ 73.882863] ath9k_htc 3-3:1.0 wlp0s20u3: disabling HT/VHT due to WEP/TKIP use
- [ 73.882865] ath9k_htc 3-3:1.0 wlp0s20u3: disabling HT as WMM/QoS is not supported by the AP
- [ 73.882866] ath9k_htc 3-3:1.0 wlp0s20u3: disabling VHT as WMM/QoS is not supported by the AP
- [ 73.883692] wlp0s20u3: associate with 00:24:17:85:c8:bf (try 1/3)
- [ 73.885955] wlp0s20u3: RX AssocResp from 00:24:17:85:c8:bf (capab=0x411 status=0 aid=2)
- [ 73.895575] wlp0s20u3: associated
- [ 103.938329] wlp0s20u3: deauthenticating from 00:24:17:85:c8:bf by local choice (reason=3)
- [ 104.097873] cfg80211: Calling CRDA to update world regulatory domain
- [ 104.099209] cfg80211: World regulatory domain updated:
- [ 104.099211] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 104.099212] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 104.099213] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 104.099214] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 104.099214] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 104.099215] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 105.604098] hub 3-0:1.0: state 7 ports 12 chg 0000 evt 0008
- [ 105.604105] hub 3-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
- [ 105.604107] usb 3-3: USB disconnect, device number 2
- [ 105.604108] usb 3-3: unregistering device
- [ 105.604109] usb 3-3: unregistering interface 3-3:1.0
- [ 105.721052] ath: phy0: Failed to wakeup in 500us
- [ 105.821431] ath: phy0: RX failed to go idle in 10 ms RXSM=0x18719d29
- [ 105.831521] ath: phy0: Failed to wakeup in 500us
- [ 106.132727] ath: phy0: RX failed to go idle in 10 ms RXSM=0x18719d29
- [ 106.160129] usb 3-3: ath9k_htc: USB layer deinitialized
- [ 106.160157] usb 3-3: usb_disable_device nuking all URBs
- [ 106.160365] usb 3-3: Successful Endpoint Configure command
- [ 106.264211] hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
- [ 107.659802] hub 3-0:1.0: state 7 ports 12 chg 0000 evt 0008
- [ 107.659808] hub 3-0:1.0: port 3, status 0101, change 0001, 12 Mb/s
- [ 107.763837] hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
- [ 107.814893] hub 3-0:1.0: port 3 not reset yet, waiting 50ms
- [ 107.916902] usb 3-3: new high-speed USB device number 5 using xhci_hcd
- [ 107.938241] usb 3-3: default language 0x0409
- [ 107.938420] usb 3-3: udev 5, busnum 3, minor = 260
- [ 107.938421] usb 3-3: New USB device found, idVendor=0cf3, idProduct=9271
- [ 107.938422] usb 3-3: New USB device strings: Mfr=16, Product=32, SerialNumber=48
- [ 107.938423] usb 3-3: Product: UB91C
- [ 107.938424] usb 3-3: Manufacturer: ATHEROS
- [ 107.938425] usb 3-3: SerialNumber: 12345
- [ 107.938464] usb 3-3: usb_probe_device
- [ 107.938465] usb 3-3: configuration #1 chosen from 1 choice
- [ 107.938677] usb 3-3: Successful Endpoint Configure command
- [ 107.938778] usb 3-3: adding 3-3:1.0 (config #1, interface 0)
- [ 107.938792] ath9k_htc 3-3:1.0: usb_probe_interface
- [ 107.938793] ath9k_htc 3-3:1.0: usb_probe_interface - got id
- [ 107.938795] usb 3-3: ath9k_htc: Firmware htc_9271.fw requested
- [ 108.219528] usb 3-3: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
- [ 108.456909] ath9k_htc 3-3:1.0: ath9k_htc: HTC initialized with 33 credits
- [ 108.722920] ath9k_htc 3-3:1.0: ath9k_htc: FW Version: 1.3
- [ 108.722922] ath: EEPROM regdomain: 0x833a
- [ 108.722922] ath: EEPROM indicates we should expect a country code
- [ 108.722924] ath: doing EEPROM country->regdmn map search
- [ 108.722924] ath: country maps to regdmn code: 0x37
- [ 108.722925] ath: Country alpha2 being used: GB
- [ 108.722925] ath: Regpair used: 0x37
- [ 108.727118] ieee80211 phy1: Atheros AR9271 Rev:1
- [ 108.727125] cfg80211: Calling CRDA for country: GB
- [ 108.728122] cfg80211: Regulatory domain changed to country: GB
- [ 108.728124] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 108.728125] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 108.728126] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 108.728126] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 108.728127] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [ 108.728128] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 108.736311] systemd-udevd[1516]: renamed network interface wlan0 to wlp0s20u3
- [ 109.033688] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u3: link is not ready
- [ 112.099992] wlp0s20u3: authenticate with 00:24:17:85:c8:bf
- [ 112.384429] wlp0s20u3: send auth to 00:24:17:85:c8:bf (try 1/3)
- [ 112.387329] wlp0s20u3: authenticated
- [ 112.387389] ath9k_htc 3-3:1.0 wlp0s20u3: disabling HT/VHT due to WEP/TKIP use
- [ 112.387391] ath9k_htc 3-3:1.0 wlp0s20u3: disabling HT as WMM/QoS is not supported by the AP
- [ 112.387392] ath9k_htc 3-3:1.0 wlp0s20u3: disabling VHT as WMM/QoS is not supported by the AP
- [ 112.387774] wlp0s20u3: associate with 00:24:17:85:c8:bf (try 1/3)
- [ 112.390017] wlp0s20u3: RX AssocResp from 00:24:17:85:c8:bf (capab=0x411 status=0 aid=2)
- [ 112.399560] wlp0s20u3: associated
- [ 112.399565] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u3: link becomes ready
- [ 142.432226] wlp0s20u3: deauthenticating from 00:24:17:85:c8:bf by local choice (reason=3)
- [ 142.478428] cfg80211: Calling CRDA to update world regulatory domain
- [ 142.617968] cfg80211: World regulatory domain updated:
- [ 142.617970] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 142.617972] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 142.617973] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 142.617974] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 142.617975] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 142.617977] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 147.629766] wlp0s20u3: authenticate with 00:24:17:85:c8:bf
- [ 147.914332] wlp0s20u3: send auth to 00:24:17:85:c8:bf (try 1/3)
- [ 147.916288] wlp0s20u3: authenticated
- [ 147.916352] ath9k_htc 3-3:1.0 wlp0s20u3: disabling HT/VHT due to WEP/TKIP use
- [ 147.916354] ath9k_htc 3-3:1.0 wlp0s20u3: disabling HT as WMM/QoS is not supported by the AP
- [ 147.916355] ath9k_htc 3-3:1.0 wlp0s20u3: disabling VHT as WMM/QoS is not supported by the AP
- [ 147.917606] wlp0s20u3: associate with 00:24:17:85:c8:bf (try 1/3)
- [ 147.919835] wlp0s20u3: RX AssocResp from 00:24:17:85:c8:bf (capab=0x411 status=0 aid=2)
- [ 147.929426] wlp0s20u3: associated
- [ 150.104980] gnome-shell[571]: segfault at 48 ip 00007fa69e8d7040 sp 00007fff3e559928 error 4 in libcogl.so.12.1.1[7fa69e868000+ab000]
- [ 153.957549] gnome-shell[1573]: segfault at 48 ip 00007f629c02c040 sp 00007fff5b9ac338 error 4 in libcogl.so.12.1.1[7f629bfbd000+ab000]
- [ 169.697692] hub 3-0:1.0: state 7 ports 12 chg 0000 evt 0008
- [ 169.697699] hub 3-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
- [ 169.697701] usb 3-3: USB disconnect, device number 5
- [ 169.697702] usb 3-3: unregistering device
- [ 169.697703] usb 3-3: unregistering interface 3-3:1.0
- [ 169.703707] wlp0s20u3: deauthenticating from 00:24:17:85:c8:bf by local choice (reason=3)
- [ 169.906817] ath: phy1: RX failed to go idle in 10 ms RXSM=0x0
- [ 169.906843] cfg80211: Calling CRDA to update world regulatory domain
- [ 169.907931] cfg80211: World regulatory domain updated:
- [ 169.907945] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 169.907946] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 169.907947] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 169.907948] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 169.907948] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 169.907949] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 169.933859] ath: phy1: Failed to wakeup in 500us
- [ 170.035181] ath: phy1: RX failed to go idle in 10 ms RXSM=0x1851a529
- [ 170.045287] ath: phy1: Failed to wakeup in 500us
- [ 170.349474] ath: phy1: RX failed to go idle in 10 ms RXSM=0x1851a529
- [ 170.411054] usb 3-3: ath9k_htc: USB layer deinitialized
- [ 170.411067] usb 3-3: usb_disable_device nuking all URBs
- [ 170.411296] usb 3-3: Successful Endpoint Configure command
- [ 170.515039] hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
- [ 176.626099] hub 3-0:1.0: state 7 ports 12 chg 0000 evt 0008
- [ 176.626106] hub 3-0:1.0: port 3, status 0101, change 0001, 12 Mb/s
- [ 176.729633] hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
- [ 176.780655] hub 3-0:1.0: port 3 not reset yet, waiting 50ms
- [ 176.882750] usb 3-3: new high-speed USB device number 6 using xhci_hcd
- [ 176.904038] usb 3-3: default language 0x0409
- [ 176.904215] usb 3-3: udev 6, busnum 3, minor = 261
- [ 176.904216] usb 3-3: New USB device found, idVendor=0cf3, idProduct=9271
- [ 176.904217] usb 3-3: New USB device strings: Mfr=16, Product=32, SerialNumber=48
- [ 176.904218] usb 3-3: Product: UB91C
- [ 176.904219] usb 3-3: Manufacturer: ATHEROS
- [ 176.904220] usb 3-3: SerialNumber: 12345
- [ 176.904269] usb 3-3: usb_probe_device
- [ 176.904270] usb 3-3: configuration #1 chosen from 1 choice
- [ 176.904470] usb 3-3: Successful Endpoint Configure command
- [ 176.904567] usb 3-3: adding 3-3:1.0 (config #1, interface 0)
- [ 176.904591] ath9k_htc 3-3:1.0: usb_probe_interface
- [ 176.904591] ath9k_htc 3-3:1.0: usb_probe_interface - got id
- [ 176.904594] usb 3-3: ath9k_htc: Firmware htc_9271.fw requested
- [ 177.185295] usb 3-3: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
- [ 177.422791] ath9k_htc 3-3:1.0: ath9k_htc: HTC initialized with 33 credits
- [ 177.688777] ath9k_htc 3-3:1.0: ath9k_htc: FW Version: 1.3
- [ 177.688779] ath: EEPROM regdomain: 0x833a
- [ 177.688779] ath: EEPROM indicates we should expect a country code
- [ 177.688780] ath: doing EEPROM country->regdmn map search
- [ 177.688781] ath: country maps to regdmn code: 0x37
- [ 177.688782] ath: Country alpha2 being used: GB
- [ 177.688782] ath: Regpair used: 0x37
- [ 177.692936] ieee80211 phy2: Atheros AR9271 Rev:1
- [ 177.692942] cfg80211: Calling CRDA for country: GB
- [ 177.694107] cfg80211: Regulatory domain changed to country: GB
- [ 177.694108] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 177.694109] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 177.694110] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 177.694111] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 177.694111] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [ 177.694112] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 177.704116] systemd-udevd[1770]: renamed network interface wlan0 to wlp0s20u3
- [ 178.001166] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u3: link is not ready
- [ 181.060780] wlp0s20u3: authenticate with 4c:54:99:37:88:59
- [ 181.481727] wlp0s20u3: send auth to 4c:54:99:37:88:59 (try 1/3)
- [ 181.483306] wlp0s20u3: authenticated
- [ 181.483353] ath9k_htc 3-3:1.0 wlp0s20u3: disabling HT/VHT due to WEP/TKIP use
- [ 181.483355] ath9k_htc 3-3:1.0 wlp0s20u3: disabling HT as WMM/QoS is not supported by the AP
- [ 181.483356] ath9k_htc 3-3:1.0 wlp0s20u3: disabling VHT as WMM/QoS is not supported by the AP
- [ 181.483597] wlp0s20u3: associate with 4c:54:99:37:88:59 (try 1/3)
- [ 181.485565] wlp0s20u3: RX AssocResp from 4c:54:99:37:88:59 (capab=0x411 status=0 aid=2)
- [ 181.495096] wlp0s20u3: associated
- [ 181.495101] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u3: link becomes ready
- [ 217.680623] nvidia 0000:01:00.0: irq 46 for MSI/MSI-X
- [ 607.486514] kworker/u16:0 (6) used greatest stack depth: 3752 bytes left
- [ 3081.479492] kworker/u16:1 (2352) used greatest stack depth: 3608 bytes left
- dhcppc6 chichimeka #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement