API tools faq
paste
Advertisement
Guest User

Marlin

a guest
Feb 5th, 2016
129
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 41.19 KB | None | 0 0
raw download clone embed print report
  1. #ifndef CONFIGURATION_H
  2. #define CONFIGURATION_H
  3.  
  4. #include "boards.h"
  5. #include "macros.h"
  6.  
  7. //===========================================================================
  8. //============================= Getting Started =============================
  9. //===========================================================================
  10. /*
  11. Here are some standard links for getting your machine calibrated:
  12. * http://reprap.org/wiki/Calibration
  13. * http://youtu.be/wAL9d7FgInk
  14. * http://calculator.josefprusa.cz
  15. * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
  16. * http://www.thingiverse.com/thing:5573
  17. * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
  18. * http://www.thingiverse.com/thing:298812
  19. */
  20.  
  21. // This configuration file contains the basic settings.
  22. // Advanced settings can be found in Configuration_adv.h
  23. // BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
  24.  
  25. //===========================================================================
  26. //============================= DELTA Printer ===============================
  27. //===========================================================================
  28. // For a Delta printer replace the configuration files with the files in the
  29. // example_configurations/delta directory.
  30. //
  31.  
  32. //===========================================================================
  33. //============================= SCARA Printer ===============================
  34. //===========================================================================
  35. // For a Scara printer replace the configuration files with the files in the
  36. // example_configurations/SCARA directory.
  37. //
  38.  
  39. // @section info
  40.  
  41. #if ENABLED(USE_AUTOMATIC_VERSIONING)
  42. #include "_Version.h"
  43. #else
  44. #include "Default_Version.h"
  45. #endif
  46.  
  47. // User-specified version info of this build to display in [Pronterface, etc] terminal window during
  48. // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
  49. // build by the user have been successfully uploaded into firmware.
  50. #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
  51. #define SHOW_BOOTSCREEN
  52. #define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
  53. //#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
  54.  
  55. // @section machine
  56.  
  57. // SERIAL_PORT selects which serial port should be used for communication with the host.
  58. // This allows the connection of wireless adapters (for instance) to non-default port pins.
  59. // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
  60. // :[0,1,2,3,4,5,6,7]
  61. #define SERIAL_PORT 0
  62.  
  63. // This determines the communication speed of the printer
  64. // :[2400,9600,19200,38400,57600,115200,250000]
  65. #define BAUDRATE 250000
  66.  
  67. // Enable the Bluetooth serial interface on AT90USB devices
  68. //#define BLUETOOTH
  69.  
  70. // The following define selects which electronics board you have.
  71. // Please choose the name from boards.h that matches your setup
  72. #ifndef MOTHERBOARD
  73. #define MOTHERBOARD BOARD_RAMPS_14_EFB
  74. #endif
  75.  
  76. // Optional custom name for your RepStrap or other custom machine
  77. // Displayed in the LCD "Ready" message
  78. //#define CUSTOM_MACHINE_NAME "3D Printer"
  79.  
  80. // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
  81. // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
  82. //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
  83.  
  84. // This defines the number of extruders
  85. // :[1,2,3,4]
  86. #define EXTRUDERS 1
  87.  
  88. // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
  89. // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
  90. // For the other hotends it is their distance from the extruder 0 hotend.
  91. //#define EXTRUDER_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis
  92. //#define EXTRUDER_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis
  93.  
  94. //// The following define selects which power supply you have. Please choose the one that matches your setup
  95. // 1 = ATX
  96. // 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
  97. // :{1:'ATX',2:'X-Box 360'}
  98.  
  99. #define POWER_SUPPLY 1
  100.  
  101. // Define this to have the electronics keep the power supply off on startup. If you don't know what this is leave it.
  102. //#define PS_DEFAULT_OFF
  103.  
  104. // @section temperature
  105.  
  106. //===========================================================================
  107. //============================= Thermal Settings ============================
  108. //===========================================================================
  109. //
  110. //--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
  111. //
  112. //// Temperature sensor settings:
  113. // -2 is thermocouple with MAX6675 (only for sensor 0)
  114. // -1 is thermocouple with AD595
  115. // 0 is not used
  116. // 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
  117. // 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  118. // 3 is Mendel-parts thermistor (4.7k pullup)
  119. // 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
  120. // 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
  121. // 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  122. // 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  123. // 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
  124. // 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
  125. // 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
  126. // 10 is 100k RS thermistor 198-961 (4.7k pullup)
  127. // 11 is 100k beta 3950 1% thermistor (4.7k pullup)
  128. // 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  129. // 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
  130. // 20 is the PT100 circuit found in the Ultimainboard V2.x
  131. // 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  132. //
  133. // 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
  134. // (but gives greater accuracy and more stable PID)
  135. // 51 is 100k thermistor - EPCOS (1k pullup)
  136. // 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
  137. // 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
  138. //
  139. // 1047 is Pt1000 with 4k7 pullup
  140. // 1010 is Pt1000 with 1k pullup (non standard)
  141. // 147 is Pt100 with 4k7 pullup
  142. // 110 is Pt100 with 1k pullup (non standard)
  143. // 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
  144. // Use it for Testing or Development purposes. NEVER for production machine.
  145. //#define DUMMY_THERMISTOR_998_VALUE 25
  146. //#define DUMMY_THERMISTOR_999_VALUE 100
  147. // :{ '0': "Not used", '4': "10k !! do not use for a hotend. Bad resolution at high temp. !!", '1': "100k / 4.7k - EPCOS", '51': "100k / 1k - EPCOS", '6': "100k / 4.7k EPCOS - Not as accurate as Table 1", '5': "100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '7': "100k / 4.7k Honeywell 135-104LAG-J01", '71': "100k / 4.7k Honeywell 135-104LAF-J01", '8': "100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9': "100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10': "100k / 4.7k RS 198-961", '11': "100k / 4.7k beta 3950 1%", '12': "100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13': "100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '60': "100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '55': "100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '2': "200k / 4.7k - ATC Semitec 204GT-2", '52': "200k / 1k - ATC Semitec 204GT-2", '-2': "Thermocouple + MAX6675 (only for sensor 0)", '-1': "Thermocouple + AD595", '3': "Mendel-parts / 4.7k", '1047': "Pt1000 / 4.7k", '1010': "Pt1000 / 1k (non standard)", '20': "PT100 (Ultimainboard V2.x)", '147': "Pt100 / 4.7k", '110': "Pt100 / 1k (non-standard)", '998': "Dummy 1", '999': "Dummy 2" }
  148. #define TEMP_SENSOR_0 1
  149. #define TEMP_SENSOR_1 0
  150. #define TEMP_SENSOR_2 0
  151. #define TEMP_SENSOR_3 0
  152. #define TEMP_SENSOR_BED 11
  153.  
  154. // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
  155. //#define TEMP_SENSOR_1_AS_REDUNDANT
  156. #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
  157.  
  158. // Actual temperature must be close to target for this long before M109 returns success
  159. #define TEMP_RESIDENCY_TIME 10 // (seconds)
  160. #define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
  161. #define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
  162.  
  163. // The minimal temperature defines the temperature below which the heater will not be enabled It is used
  164. // to check that the wiring to the thermistor is not broken.
  165. // Otherwise this would lead to the heater being powered on all the time.
  166. #define HEATER_0_MINTEMP 5
  167. #define HEATER_1_MINTEMP 5
  168. #define HEATER_2_MINTEMP 5
  169. #define HEATER_3_MINTEMP 5
  170. #define BED_MINTEMP 5
  171.  
  172. // When temperature exceeds max temp, your heater will be switched off.
  173. // This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
  174. // You should use MINTEMP for thermistor short/failure protection.
  175. #define HEATER_0_MAXTEMP 275
  176. #define HEATER_1_MAXTEMP 275
  177. #define HEATER_2_MAXTEMP 275
  178. #define HEATER_3_MAXTEMP 275
  179. #define BED_MAXTEMP 150
  180.  
  181. // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
  182. // average current. The value should be an integer and the heat bed will be turned on for 1 interval of
  183. // HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
  184. //#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
  185.  
  186. // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
  187. //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
  188. //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R
  189.  
  190. //===========================================================================
  191. //============================= PID Settings ================================
  192. //===========================================================================
  193. // PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
  194.  
  195. // Comment the following line to disable PID and enable bang-bang.
  196. #define PIDTEMP
  197. #define BANG_MAX 255 // limits current to nozzle while in bang-bang mode; 255=full current
  198. #define PID_MAX BANG_MAX // limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
  199. #if ENABLED(PIDTEMP)
  200. //#define PID_DEBUG // Sends debug data to the serial port.
  201. //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
  202. //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
  203. //#define PID_PARAMS_PER_EXTRUDER // Uses separate PID parameters for each extruder (useful for mismatched extruders)
  204. // Set/get with gcode: M301 E[extruder number, 0-2]
  205. #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
  206. // is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
  207. #define PID_INTEGRAL_DRIVE_MAX PID_MAX //limit for the integral term
  208. #define K1 0.95 //smoothing factor within the PID
  209.  
  210. // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
  211. // Ultimaker
  212. #define DEFAULT_Kp 22.2
  213. #define DEFAULT_Ki 1.08
  214. #define DEFAULT_Kd 114
  215.  
  216. // MakerGear
  217. //#define DEFAULT_Kp 7.0
  218. //#define DEFAULT_Ki 0.1
  219. //#define DEFAULT_Kd 12
  220.  
  221. // Mendel Parts V9 on 12V
  222. //#define DEFAULT_Kp 63.0
  223. //#define DEFAULT_Ki 2.25
  224. //#define DEFAULT_Kd 440
  225.  
  226. #endif // PIDTEMP
  227.  
  228. //===========================================================================
  229. //============================= PID > Bed Temperature Control ===============
  230. //===========================================================================
  231. // Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
  232. //
  233. // Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
  234. // If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz,
  235. // which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
  236. // This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
  237. // If your configuration is significantly different than this and you don't understand the issues involved, you probably
  238. // shouldn't use bed PID until someone else verifies your hardware works.
  239. // If this is enabled, find your own PID constants below.
  240. //#define PIDTEMPBED
  241.  
  242. //#define BED_LIMIT_SWITCHING
  243.  
  244. // This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
  245. // all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
  246. // setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
  247. // so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
  248. #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
  249.  
  250. //#define PID_BED_DEBUG // Sends debug data to the serial port.
  251.  
  252. #if ENABLED(PIDTEMPBED)
  253.  
  254. #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
  255.  
  256. //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  257. //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
  258. #define DEFAULT_bedKp 10.00
  259. #define DEFAULT_bedKi .023
  260. #define DEFAULT_bedKd 305.4
  261.  
  262. //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  263. //from pidautotune
  264. //#define DEFAULT_bedKp 97.1
  265. //#define DEFAULT_bedKi 1.41
  266. //#define DEFAULT_bedKd 1675.16
  267.  
  268. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
  269. #endif // PIDTEMPBED
  270.  
  271. // @section extruder
  272.  
  273. //this prevents dangerous Extruder moves, i.e. if the temperature is under the limit
  274. //can be software-disabled for whatever purposes by
  275. #define PREVENT_DANGEROUS_EXTRUDE
  276. //if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
  277. #define PREVENT_LENGTHY_EXTRUDE
  278.  
  279. #define EXTRUDE_MINTEMP 170
  280. #define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.
  281.  
  282. //===========================================================================
  283. //======================== Thermal Runaway Protection =======================
  284. //===========================================================================
  285.  
  286. /**
  287. * Thermal Runaway Protection protects your printer from damage and fire if a
  288. * thermistor falls out or temperature sensors fail in any way.
  289. *
  290. * The issue: If a thermistor falls out or a temperature sensor fails,
  291. * Marlin can no longer sense the actual temperature. Since a disconnected
  292. * thermistor reads as a low temperature, the firmware will keep the heater on.
  293. *
  294. * The solution: Once the temperature reaches the target, start observing.
  295. * If the temperature stays too far below the target (hysteresis) for too long,
  296. * the firmware will halt as a safety precaution.
  297. */
  298.  
  299. #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
  300. #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
  301.  
  302. //===========================================================================
  303. //============================= Mechanical Settings =========================
  304. //===========================================================================
  305.  
  306. // @section machine
  307.  
  308. // Uncomment this option to enable CoreXY kinematics
  309. //#define COREXY
  310.  
  311. // Uncomment this option to enable CoreXZ kinematics
  312. //#define COREXZ
  313.  
  314. // Enable this option for Toshiba steppers
  315. //#define CONFIG_STEPPERS_TOSHIBA
  316.  
  317. // @section homing
  318.  
  319. // coarse Endstop Settings
  320. #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
  321.  
  322. #if DISABLED(ENDSTOPPULLUPS)
  323. // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
  324. //#define ENDSTOPPULLUP_XMAX
  325. //#define ENDSTOPPULLUP_YMAX
  326. //#define ENDSTOPPULLUP_ZMAX
  327. //#define ENDSTOPPULLUP_XMIN
  328. //#define ENDSTOPPULLUP_YMIN
  329. //#define ENDSTOPPULLUP_ZMIN
  330. //#define ENDSTOPPULLUP_ZMIN_PROBE
  331. #endif
  332.  
  333. // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
  334. const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
  335. const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
  336. const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
  337. const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
  338. const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
  339. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
  340. const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
  341. //#define DISABLE_MAX_ENDSTOPS
  342. //#define DISABLE_MIN_ENDSTOPS
  343.  
  344. // If you want to enable the Z probe pin, but disable its use, uncomment the line below.
  345. // This only affects a Z probe endstop if you have separate Z min endstop as well and have
  346. // activated Z_MIN_PROBE_ENDSTOP below. If you are using the Z Min endstop on your Z probe,
  347. // this has no effect.
  348. //#define DISABLE_Z_MIN_PROBE_ENDSTOP
  349.  
  350. // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
  351. // :{0:'Low',1:'High'}
  352. #define X_ENABLE_ON 0
  353. #define Y_ENABLE_ON 0
  354. #define Z_ENABLE_ON 0
  355. #define E_ENABLE_ON 0 // For all extruders
  356.  
  357. // Disables axis when it's not being used.
  358. // WARNING: When motors turn off there is a chance of losing position accuracy!
  359. #define DISABLE_X false
  360. #define DISABLE_Y false
  361. #define DISABLE_Z false
  362.  
  363. // @section extruder
  364.  
  365. #define DISABLE_E false // For all extruders
  366. #define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
  367.  
  368. // @section machine
  369.  
  370. // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
  371. #define INVERT_X_DIR true
  372. #define INVERT_Y_DIR false
  373. #define INVERT_Z_DIR true
  374.  
  375. // @section extruder
  376.  
  377. // For direct drive extruder v9 set to true, for geared extruder set to false.
  378. #define INVERT_E0_DIR true
  379. #define INVERT_E1_DIR false
  380. #define INVERT_E2_DIR false
  381. #define INVERT_E3_DIR false
  382.  
  383. // @section homing
  384.  
  385. // ENDSTOP SETTINGS:
  386. // Sets direction of endstops when homing; 1=MAX, -1=MIN
  387. // :[-1,1]
  388. #define X_HOME_DIR -1
  389. #define Y_HOME_DIR -1
  390. #define Z_HOME_DIR -1
  391.  
  392. #define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS.
  393. #define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
  394.  
  395. // @section machine
  396.  
  397. // Travel limits after homing (units are in mm)
  398. #define X_MIN_POS 0
  399. #define Y_MIN_POS 0
  400. #define Z_MIN_POS 0
  401. #define X_MAX_POS 220
  402. #define Y_MAX_POS 220
  403. #define Z_MAX_POS 200
  404.  
  405. //===========================================================================
  406. //========================= Filament Runout Sensor ==========================
  407. //===========================================================================
  408. //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
  409. // In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made.
  410. // It is assumed that when logic high = filament available
  411. // when logic low = filament ran out
  412. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  413. const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
  414. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
  415. #define FILAMENT_RUNOUT_SCRIPT "M600"
  416. #endif
  417.  
  418. //===========================================================================
  419. //=========================== Manual Bed Leveling ===========================
  420. //===========================================================================
  421.  
  422. //#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
  423. //#define MESH_BED_LEVELING // Enable mesh bed leveling.
  424.  
  425. #if ENABLED(MANUAL_BED_LEVELING)
  426. #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
  427. #endif // MANUAL_BED_LEVELING
  428.  
  429. #if ENABLED(MESH_BED_LEVELING)
  430. #define MESH_MIN_X 10
  431. #define MESH_MAX_X (X_MAX_POS - MESH_MIN_X)
  432. #define MESH_MIN_Y 10
  433. #define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y)
  434. #define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
  435. #define MESH_NUM_Y_POINTS 3
  436. #define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0.
  437. #endif // MESH_BED_LEVELING
  438.  
  439. //===========================================================================
  440. //============================ Bed Auto Leveling ============================
  441. //===========================================================================
  442.  
  443. // @section bedlevel
  444.  
  445. #define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
  446. //#define DEBUG_LEVELING_FEATURE
  447. #define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z-Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
  448.  
  449. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  450.  
  451. // There are 2 different ways to specify probing locations:
  452. //
  453. // - "grid" mode
  454. // Probe several points in a rectangular grid.
  455. // You specify the rectangle and the density of sample points.
  456. // This mode is preferred because there are more measurements.
  457. //
  458. // - "3-point" mode
  459. // Probe 3 arbitrary points on the bed (that aren't colinear)
  460. // You specify the XY coordinates of all 3 points.
  461.  
  462. // Enable this to sample the bed in a grid (least squares solution).
  463. // Note: this feature generates 10KB extra code size.
  464. #define AUTO_BED_LEVELING_GRID
  465.  
  466. #if ENABLED(AUTO_BED_LEVELING_GRID)
  467.  
  468. #define LEFT_PROBE_BED_POSITION 15
  469. #define RIGHT_PROBE_BED_POSITION 170
  470. #define FRONT_PROBE_BED_POSITION 20
  471. #define BACK_PROBE_BED_POSITION 170
  472.  
  473. #define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this.
  474.  
  475. // Set the number of grid points per dimension.
  476. // You probably don't need more than 3 (squared=9).
  477. #define AUTO_BED_LEVELING_GRID_POINTS 2
  478.  
  479. #else // !AUTO_BED_LEVELING_GRID
  480.  
  481. // Arbitrary points to probe.
  482. // A simple cross-product is used to estimate the plane of the bed.
  483. #define ABL_PROBE_PT_1_X 15
  484. #define ABL_PROBE_PT_1_Y 180
  485. #define ABL_PROBE_PT_2_X 15
  486. #define ABL_PROBE_PT_2_Y 20
  487. #define ABL_PROBE_PT_3_X 170
  488. #define ABL_PROBE_PT_3_Y 20
  489.  
  490. #endif // AUTO_BED_LEVELING_GRID
  491.  
  492. // Offsets to the Z probe relative to the nozzle tip.
  493. // X and Y offsets must be integers.
  494. #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
  495. #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
  496. #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
  497.  
  498. #define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
  499. // Be sure you have this distance over your Z_MAX_POS in case.
  500.  
  501. #define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min.
  502.  
  503. #define Z_RAISE_BEFORE_PROBING 15 // How much the Z axis will be raised before traveling to the first probing point.
  504. #define Z_RAISE_BETWEEN_PROBINGS 5 // How much the Z axis will be raised when traveling from between next probing points.
  505. #define Z_RAISE_AFTER_PROBING 15 // How much the Z axis will be raised after the last probing point.
  506.  
  507. //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
  508. // Useful to retract a deployable Z probe.
  509.  
  510. //#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
  511. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
  512.  
  513.  
  514. //If you have enabled the Bed Auto Leveling and are using the same Z Probe for Z Homing,
  515. //it is highly recommended you let this Z_SAFE_HOMING enabled!!!
  516.  
  517. #define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
  518. // When defined, it will:
  519. // - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
  520. // - If stepper drivers timeout, it will need X and Y homing again before Z homing.
  521. // - Position the Z probe in a defined XY point before Z Homing when homing all axis (G28).
  522. // - Block Z homing only when the Z probe is outside bed area.
  523.  
  524. #if ENABLED(Z_SAFE_HOMING)
  525.  
  526. #define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2) // X point for Z homing when homing all axis (G28).
  527. #define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2) // Y point for Z homing when homing all axis (G28).
  528.  
  529. #endif
  530.  
  531. // Support for a dedicated Z probe endstop separate from the Z min endstop.
  532. // If you would like to use both a Z probe and a Z min endstop together,
  533. // uncomment #define Z_MIN_PROBE_ENDSTOP and read the instructions below.
  534. // If you still want to use the Z min endstop for homing, disable Z_SAFE_HOMING above.
  535. // Example: To park the head outside the bed area when homing with G28.
  536. //
  537. // WARNING:
  538. // The Z min endstop will need to set properly as it would without a Z probe
  539. // to prevent head crashes and premature stopping during a print.
  540. //
  541. // To use a separate Z probe endstop, you must have a Z_MIN_PROBE_PIN
  542. // defined in the pins_XXXXX.h file for your control board.
  543. // If you are using a servo based Z probe, you will need to enable NUM_SERVOS,
  544. // Z_ENDSTOP_SERVO_NR and SERVO_ENDSTOP_ANGLES in the R/C SERVO support below.
  545. // RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin
  546. // in the Aux 4 section of the RAMPS board. Use 5V for powered sensors,
  547. // otherwise connect to ground and D32 for normally closed configuration
  548. // and 5V and D32 for normally open configurations.
  549. // Normally closed configuration is advised and assumed.
  550. // The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin.
  551. // Z_MIN_PROBE_PIN is setting the pin to use on the Arduino.
  552. // Since the D32 pin on the RAMPS maps to D32 on Arduino, this works.
  553. // D32 is currently selected in the RAMPS 1.3/1.4 pin file.
  554. // All other boards will need changes to the respective pins_XXXXX.h file.
  555. //
  556. // WARNING:
  557. // Setting the wrong pin may have unexpected and potentially disastrous outcomes.
  558. // Use with caution and do your homework.
  559. //
  560. //#define Z_MIN_PROBE_ENDSTOP
  561.  
  562. #endif // AUTO_BED_LEVELING_FEATURE
  563.  
  564.  
  565. // @section homing
  566.  
  567. // The position of the homing switches
  568. //#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
  569. //#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
  570.  
  571. // Manual homing switch locations:
  572. // For deltabots this means top and center of the Cartesian print volume.
  573. #if ENABLED(MANUAL_HOME_POSITIONS)
  574. #define MANUAL_X_HOME_POS 0
  575. #define MANUAL_Y_HOME_POS 0
  576. #define MANUAL_Z_HOME_POS 0
  577. //#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
  578. #endif
  579.  
  580. // @section movement
  581.  
  582. /**
  583. * MOVEMENT SETTINGS
  584. */
  585.  
  586. #define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min)
  587.  
  588. // default settings
  589.  
  590. #define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,400,800} // default steps per unit for Ultimaker
  591. #define DEFAULT_MAX_FEEDRATE {300, 300, 15, 25} // (mm/sec)
  592. #define DEFAULT_MAX_ACCELERATION {3000,3000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
  593.  
  594. #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration in mm/s^2 for printing moves
  595. #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration in mm/s^2 for retracts
  596. #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
  597.  
  598. // The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously)
  599. #define DEFAULT_XYJERK 20.0 // (mm/sec)
  600. #define DEFAULT_ZJERK 0.4 // (mm/sec)
  601. #define DEFAULT_EJERK 5.0 // (mm/sec)
  602.  
  603.  
  604. //=============================================================================
  605. //============================= Additional Features ===========================
  606. //=============================================================================
  607.  
  608. // @section more
  609.  
  610. // Custom M code points
  611. #define CUSTOM_M_CODES
  612. #if ENABLED(CUSTOM_M_CODES)
  613. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  614. #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
  615. #define Z_PROBE_OFFSET_RANGE_MIN -20
  616. #define Z_PROBE_OFFSET_RANGE_MAX 20
  617. #endif
  618. #endif
  619.  
  620. // @section extras
  621.  
  622. // EEPROM
  623. // The microcontroller can store settings in the EEPROM, e.g. max velocity...
  624. // M500 - stores parameters in EEPROM
  625. // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
  626. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
  627. //define this to enable EEPROM support
  628. //#define EEPROM_SETTINGS
  629.  
  630. #if ENABLED(EEPROM_SETTINGS)
  631. // To disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:
  632. #define EEPROM_CHITCHAT // Please keep turned on if you can.
  633. #endif
  634.  
  635. //
  636. // M100 Free Memory Watcher
  637. //
  638. //#define M100_FREE_MEMORY_WATCHER // uncomment to add the M100 Free Memory Watcher for debug purpose
  639.  
  640. // @section temperature
  641.  
  642. // Preheat Constants
  643. #define PLA_PREHEAT_HOTEND_TEMP 180
  644. #define PLA_PREHEAT_HPB_TEMP 70
  645. #define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255
  646.  
  647. #define ABS_PREHEAT_HOTEND_TEMP 240
  648. #define ABS_PREHEAT_HPB_TEMP 110
  649. #define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255
  650.  
  651. //==============================LCD and SD support=============================
  652. // @section lcd
  653.  
  654. // Define your display language below. Replace (en) with your language code and uncomment.
  655. // en, pl, fr, de, es, ru, bg, it, pt, pt-br, fi, an, nl, ca, eu, kana, kana_utf8, cn, test
  656. // See also language.h
  657. #define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
  658.  
  659. // Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
  660. // To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
  661. // See also documentation/LCDLanguageFont.md
  662. #define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
  663. //#define DISPLAY_CHARSET_HD44780_WESTERN
  664. //#define DISPLAY_CHARSET_HD44780_CYRILLIC
  665.  
  666. //#define ULTRA_LCD //general LCD support, also 16x2
  667. //#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
  668. //#define SDSUPPORT // Enable SD Card Support in Hardware Console
  669. // Changed behaviour! If you need SDSUPPORT uncomment it!
  670. //#define SDSLOW // Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
  671. //#define SDEXTRASLOW // Use even slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
  672. //#define SD_CHECK_AND_RETRY // Use CRC checks and retries on the SD communication
  673. //#define ENCODER_PULSES_PER_STEP 1 // Increase if you have a high resolution encoder
  674. //#define ENCODER_STEPS_PER_MENU_ITEM 5 // Set according to ENCODER_PULSES_PER_STEP or your liking
  675. //#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
  676. //#define ULTIPANEL //the UltiPanel as on Thingiverse
  677. //#define SPEAKER // The sound device is a speaker - not a buzzer. A buzzer resonates with his own frequency.
  678. //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
  679. //#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
  680. // 0 to disable buzzer feedback. Test with M300 S<frequency Hz> P<duration ms>
  681. // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
  682. // http://reprap.org/wiki/PanelOne
  683. //#define PANEL_ONE
  684.  
  685. // The MaKr3d Makr-Panel with graphic controller and SD support
  686. // http://reprap.org/wiki/MaKr3d_MaKrPanel
  687. //#define MAKRPANEL
  688.  
  689. // The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD
  690. // http://panucatt.com
  691. // ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
  692. //#define VIKI2
  693. //#define miniVIKI
  694.  
  695. // This is a new controller currently under development. https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
  696. //
  697. // ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
  698. //#define ELB_FULL_GRAPHIC_CONTROLLER
  699. //#define SD_DETECT_INVERTED
  700.  
  701. // The RepRapDiscount Smart Controller (white PCB)
  702. // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
  703. //#define REPRAP_DISCOUNT_SMART_CONTROLLER
  704.  
  705. // The GADGETS3D G3D LCD/SD Controller (blue PCB)
  706. // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
  707. //#define G3D_PANEL
  708.  
  709. // The RepRapDiscount FULL GRAPHIC Smart Controller (quadratic white PCB)
  710. // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
  711. //
  712. // ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
  713. //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  714.  
  715. // The RepRapWorld REPRAPWORLD_KEYPAD v1.1
  716. // http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
  717. //#define REPRAPWORLD_KEYPAD
  718. //#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // how much should be moved when a key is pressed, eg 10.0 means 10mm per click
  719.  
  720. // The Elefu RA Board Control Panel
  721. // http://www.elefu.com/index.php?route=product/product&product_id=53
  722. // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
  723. //#define RA_CONTROL_PANEL
  724.  
  725. // The MakerLab Mini Panel with graphic controller and SD support
  726. // http://reprap.org/wiki/Mini_panel
  727. //#define MINIPANEL
  728.  
  729. /**
  730. * I2C Panels
  731. */
  732.  
  733. //#define LCD_I2C_SAINSMART_YWROBOT
  734.  
  735. // PANELOLU2 LCD with status LEDs, separate encoder and click inputs
  736. //
  737. // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
  738. // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
  739. // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file)
  740. // Note: The PANELOLU2 encoder click input can either be directly connected to a pin
  741. // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
  742. //#define LCD_I2C_PANELOLU2
  743.  
  744. // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
  745. //#define LCD_I2C_VIKI
  746.  
  747. // SSD1306 OLED generic display support
  748. // ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
  749. //#define U8GLIB_SSD1306
  750.  
  751. // Shift register panels
  752. // ---------------------
  753. // 2 wire Non-latching LCD SR from:
  754. // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
  755. // LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
  756. //#define SAV_3DLCD
  757.  
  758. // @section extras
  759.  
  760. // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
  761. //#define FAST_PWM_FAN
  762.  
  763. // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
  764. // which is not as annoying as with the hardware PWM. On the other hand, if this frequency
  765. // is too low, you should also increment SOFT_PWM_SCALE.
  766. //#define FAN_SOFT_PWM
  767.  
  768. // Incrementing this by 1 will double the software PWM frequency,
  769. // affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
  770. // However, control resolution will be halved for each increment;
  771. // at zero value, there are 128 effective control positions.
  772. #define SOFT_PWM_SCALE 0
  773.  
  774. // Temperature status LEDs that display the hotend and bet temperature.
  775. // If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on.
  776. // Otherwise the RED led is on. There is 1C hysteresis.
  777. //#define TEMP_STAT_LEDS
  778.  
  779. // M240 Triggers a camera by emulating a Canon RC-1 Remote
  780. // Data from: http://www.doc-diy.net/photo/rc-1_hacked/
  781. //#define PHOTOGRAPH_PIN 23
  782.  
  783. // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
  784. //#define SF_ARC_FIX
  785.  
  786. // Support for the BariCUDA Paste Extruder.
  787. //#define BARICUDA
  788.  
  789. //define BlinkM/CyzRgb Support
  790. //#define BLINKM
  791.  
  792. /*********************************************************************\
  793. * R/C SERVO support
  794. * Sponsored by TrinityLabs, Reworked by codexmas
  795. **********************************************************************/
  796.  
  797. // Number of servos
  798. //
  799. // If you select a configuration below, this will receive a default value and does not need to be set manually
  800. // set it manually if you have more servos than extruders and wish to manually control some
  801. // leaving it undefined or defining as 0 will disable the servo subsystem
  802. // If unsure, leave commented / disabled
  803. //
  804. #define NUM_SERVOS 1 // Servo index starts with 0 for M280 command
  805.  
  806. // Servo Endstops
  807. //
  808. // This allows for servo actuated endstops, primary usage is for the Z Axis to eliminate calibration or bed height changes.
  809. // Use M851 to set the Z probe vertical offset from the nozzle. Store that setting with M500.
  810. //
  811. //#define X_ENDSTOP_SERVO_NR 1
  812. //#define Y_ENDSTOP_SERVO_NR 2
  813. #define Z_ENDSTOP_SERVO_NR 0
  814. #define SERVO_ENDSTOP_ANGLES {{0,0}, {0,0}, {70,0}} // X,Y,Z Axis Extend and Retract angles
  815.  
  816. // Servo deactivation
  817. //
  818. // With this option servos are powered only during movement, then turned off to prevent jitter.
  819. //#define DEACTIVATE_SERVOS_AFTER_MOVE
  820.  
  821. #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE)
  822. // Delay (in microseconds) before turning the servo off. This depends on the servo speed.
  823. // 300ms is a good value but you can try less delay.
  824. // If the servo can't reach the requested position, increase it.
  825. #define SERVO_DEACTIVATION_DELAY 300
  826. #endif
  827.  
  828. /**********************************************************************\
  829. * Support for a filament diameter sensor
  830. * Also allows adjustment of diameter at print time (vs at slicing)
  831. * Single extruder only at this point (extruder 0)
  832. *
  833. * Motherboards
  834. * 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
  835. * 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
  836. * 301 - Rambo - uses Analog input 3
  837. * Note may require analog pins to be defined for different motherboards
  838. **********************************************************************/
  839. // Uncomment below to enable
  840. //#define FILAMENT_SENSOR
  841.  
  842. #define FILAMENT_SENSOR_EXTRUDER_NUM 0 //The number of the extruder that has the filament sensor (0,1,2)
  843. #define MEASUREMENT_DELAY_CM 14 //measurement delay in cm. This is the distance from filament sensor to middle of barrel
  844.  
  845. #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation
  846. #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm
  847. #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm
  848. #define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM)
  849.  
  850. //defines used in the code
  851. #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially
  852.  
  853. //When using an LCD, uncomment the line below to display the Filament sensor data on the last line instead of status. Status will appear for 5 sec.
  854. //#define FILAMENT_LCD_DISPLAY
  855.  
  856. #include "Configuration_adv.h"
  857. #include "thermistortables.h"
  858.  
  859. #endif //CONFIGURATION_H
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!