Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@raspberrypi:~/device-tree# raspi-gpio get
- BANK0 (GPIO 0 to 27):
- GPIO 00: level=1 fsel=0 alt= func=INPUT
- GPIO 01: level=1 fsel=0 alt= func=INPUT
- GPIO 02: level=1 fsel=4 alt=0 func=SDA1
- GPIO 03: level=1 fsel=4 alt=0 func=SCL1
- GPIO 04: level=0 fsel=1 alt= func=OUTPUT
- GPIO 05: level=0 fsel=1 alt= func=OUTPUT
- GPIO 06: level=1 fsel=0 alt= func=INPUT
- GPIO 07: level=1 fsel=0 alt= func=INPUT
- GPIO 08: level=1 fsel=0 alt= func=INPUT
- GPIO 09: level=0 fsel=0 alt= func=INPUT
- GPIO 10: level=0 fsel=0 alt= func=INPUT
- GPIO 11: level=0 fsel=0 alt= func=INPUT
- GPIO 12: level=0 fsel=0 alt= func=INPUT
- GPIO 13: level=0 fsel=0 alt= func=INPUT
- GPIO 14: level=1 fsel=2 alt=5 func=TXD1
- GPIO 15: level=1 fsel=2 alt=5 func=RXD1
- GPIO 16: level=0 fsel=0 alt= func=INPUT
- GPIO 17: level=0 fsel=0 alt= func=INPUT
- GPIO 18: level=0 fsel=0 alt= func=INPUT
- GPIO 19: level=0 fsel=0 alt= func=INPUT
- GPIO 20: level=0 fsel=0 alt= func=INPUT
- GPIO 21: level=0 fsel=1 alt= func=OUTPUT
- GPIO 22: level=0 fsel=1 alt= func=OUTPUT
- GPIO 23: level=0 fsel=0 alt= func=INPUT
- GPIO 24: level=0 fsel=0 alt= func=INPUT
- GPIO 25: level=0 fsel=0 alt= func=INPUT
- GPIO 26: level=0 fsel=0 alt= func=INPUT
- GPIO 27: level=0 fsel=0 alt= func=INPUT
- BANK1 (GPIO 28 to 45):
- GPIO 28: level=1 fsel=0 alt= func=INPUT
- GPIO 29: level=1 fsel=0 alt= func=INPUT
- GPIO 30: level=0 fsel=0 alt= func=INPUT
- GPIO 31: level=0 fsel=0 alt= func=INPUT
- GPIO 32: level=0 fsel=0 alt= func=INPUT
- GPIO 33: level=0 fsel=0 alt= func=INPUT
- GPIO 34: level=1 fsel=1 alt= func=OUTPUT
- GPIO 35: level=1 fsel=1 alt= func=OUTPUT
- GPIO 36: level=1 fsel=1 alt= func=OUTPUT
- GPIO 37: level=0 fsel=0 alt= func=INPUT
- GPIO 38: level=0 fsel=0 alt= func=INPUT
- GPIO 39: level=0 fsel=1 alt= func=OUTPUT
- GPIO 40: level=0 fsel=0 alt= func=INPUT
- GPIO 41: level=0 fsel=0 alt= func=INPUT
- GPIO 42: level=0 fsel=0 alt= func=INPUT
- GPIO 43: level=0 fsel=0 alt= func=INPUT
- GPIO 44: level=1 fsel=1 alt= func=OUTPUT
- GPIO 45: level=0 fsel=0 alt= func=INPUT
- BANK2 (GPIO 46 to 53):
- GPIO 46: level=0 fsel=0 alt= func=INPUT
- GPIO 47: level=0 fsel=1 alt= func=OUTPUT
- GPIO 48: level=1 fsel=7 alt=3 func=SD1_CLK
- GPIO 49: level=1 fsel=7 alt=3 func=SD1_CMD
- GPIO 50: level=1 fsel=7 alt=3 func=SD1_DAT0
- GPIO 51: level=1 fsel=7 alt=3 func=SD1_DAT1
- GPIO 52: level=1 fsel=7 alt=3 func=SD1_DAT2
- GPIO 53: level=1 fsel=7 alt=3 func=SD1_DAT3
- ==========================================================================================================================================
- root@raspberrypi:~/device-tree# cat /boot/config.txt
- # For more options and information see
- # http://www.raspberrypi.org/documentation/configuration/config-txt.md
- # Some settings may impact device functionality. See link above for details
- # uncomment if you get no picture on HDMI for a default "safe" mode
- #hdmi_safe=1
- # uncomment this if your display has a black border of unused pixels visible
- # and your display can output without overscan
- #disable_overscan=1
- # uncomment the following to adjust overscan. Use positive numbers if console
- # goes off screen, and negative if there is too much border
- #overscan_left=16
- #overscan_right=16
- #overscan_top=16
- #overscan_bottom=16
- # uncomment to force a console size. By default it will be display's size minus
- # overscan.
- #framebuffer_width=1280
- #framebuffer_height=720
- # uncomment if hdmi display is not detected and composite is being output
- #hdmi_force_hotplug=1
- # uncomment to force a specific HDMI mode (this will force VGA)
- #hdmi_group=1
- #hdmi_mode=1
- # uncomment to force a HDMI mode rather than DVI. This can make audio work in
- # DMT (computer monitor) modes
- #hdmi_drive=2
- # uncomment to increase signal to HDMI, if you have interference, blanking, or
- # no display
- #config_hdmi_boost=4
- # uncomment for composite PAL
- #sdtv_mode=2
- #uncomment to overclock the arm. 700 MHz is the default.
- #arm_freq=800
- # Stops intermittant booting hang on later kernels
- dtoverlay=mmc
- # Additional overlays and parameters are documented /boot/overlays/README
- ##############################################################################################
- # DEVICE OVERLAY CONFIG
- ###############################################################################################
- # Enable debug, show after boot via : vcdbg log msg
- dtdebug=on
- ### UART0 ###
- dtoverlay=uart0-full
- ### UART1 ###
- # Basic UART1 overlay with RX/TX pins only
- dtoverlay=uart1,txd1_pin=14,rxd1_pin=15
- ### I2C0 ###
- # These appear on the default RPi ALT1 pins 0+1
- # Used by CAM1 and RPi-IO (HAT board EEPROM)
- #dtparam=i2c0=on
- # Alternate example with params
- #dtparam=i2c0=on,i2c0_baudrate=150000
- ### I2C1 ###
- # These appear on the default RPi ALT1 pins 2+3
- # Used by RTC, ASIO and RPI-IO
- dtparam=i2c1=on
- # Alternate example with params
- #dtparam=i2c1=on,i2c1_baudrate=180000
- ### RTC ##
- dtoverlay=i2c-rtc,ds1307
- ==========================================================================================================================================
- root@raspberrypi:~/device-tree# dmesg
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.1.21+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #872 Wed Apr 6 17:27:13 BST 2016
- [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- [ 0.000000] Machine model: Raspberry Pi Compute Module Rev 1.0
- [ 0.000000] cma: Reserved 8 MiB at 0x1b400000
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] On node 0 totalpages: 114688
- [ 0.000000] free_area_init_node: node 0, pgdat c0839a10, node_mem_map db010000
- [ 0.000000] Normal zone: 1008 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 114688 pages, LIFO batch:31
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113680
- [ 0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708.boardrev=0x11 bcm2708.serial=0x61f72a8a smsc95xx.macaddr=B8:27:EB:F7:2A:8A bcm2708_fb.fbswap=1 bcm2708.uart_clock=3000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 436832K/458752K available (5796K kernel code, 488K rwdata, 1788K rodata, 348K init, 720K bss, 13728K reserved, 8192K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xdc800000 - 0xff000000 ( 552 MB)
- lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
- modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- .text : 0xc0008000 - 0xc077027c (7585 kB)
- .init : 0xc0771000 - 0xc07c8000 ( 348 kB)
- .data : 0xc07c8000 - 0xc08422f0 ( 489 kB)
- .bss : 0xc08422f0 - 0xc08f6480 ( 721 kB)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:522
- [ 0.000000] clocksource stc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
- [ 0.000015] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
- [ 0.000056] Switching to timer-based delay loop, resolution 1000ns
- [ 0.000339] Console: colour dummy device 80x30
- [ 0.001304] console [tty1] enabled
- [ 0.001362] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
- [ 0.001444] pid_max: default: 32768 minimum: 301
- [ 0.001819] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.001888] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.002946] Initializing cgroup subsys blkio
- [ 0.003039] Initializing cgroup subsys memory
- [ 0.003108] Initializing cgroup subsys devices
- [ 0.003168] Initializing cgroup subsys freezer
- [ 0.003228] Initializing cgroup subsys net_cls
- [ 0.003345] CPU: Testing write buffer coherency: ok
- [ 0.003459] ftrace: allocating 19755 entries in 58 pages
- [ 0.105282] Setting up static identity map for 0x81c0 - 0x81f8
- [ 0.107485] devtmpfs: initialized
- [ 0.118948] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
- [ 0.119405] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.121382] pinctrl core: initialized pinctrl subsystem
- [ 0.122280] NET: Registered protocol family 16
- [ 0.127803] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.129297] bcm2708.uart_clock = 3000000
- [ 0.134522] bcm2708: Mini UART enabled
- [ 0.135445] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
- [ 0.135515] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.135719] Serial: AMBA PL011 UART driver
- [ 0.136018] 20201000.uart: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev2
- [ 0.136760] bcm2835-mbox 2000b880.mailbox: mailbox enabled
- [ 0.179296] bcm2708-dmaengine 20007000.dma: DMA legacy API manager at f2007000, dmachans=0xf35
- [ 0.179433] bcm2708-dmaengine 20007000.dma: Initialized 7 DMA channels (+ 1 legacy)
- [ 0.180290] bcm2708-dmaengine 20007000.dma: Load BCM2835 DMA engine driver
- [ 0.180358] bcm2708-dmaengine 20007000.dma: dma_debug:0
- [ 0.181299] SCSI subsystem initialized
- [ 0.181699] usbcore: registered new interface driver usbfs
- [ 0.181875] usbcore: registered new interface driver hub
- [ 0.182120] usbcore: registered new device driver usb
- [ 0.183086] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-04-06 18:38
- [ 0.210656] Switched to clocksource stc
- [ 0.259349] FS-Cache: Loaded
- [ 0.259766] CacheFiles: Loaded
- [ 0.275594] NET: Registered protocol family 2
- [ 0.277085] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.277241] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.277374] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.277505] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.277575] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.277964] NET: Registered protocol family 1
- [ 0.278601] RPC: Registered named UNIX socket transport module.
- [ 0.278676] RPC: Registered udp transport module.
- [ 0.278716] RPC: Registered tcp transport module.
- [ 0.278754] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.279962] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
- [ 0.281621] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 0.298408] VFS: Disk quotas dquot_6.6.0
- [ 0.298893] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.301607] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.303054] NFS: Registering the id_resolver key type
- [ 0.303193] Key type id_resolver registered
- [ 0.303241] Key type id_legacy registered
- [ 0.307091] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.307611] io scheduler noop registered
- [ 0.307698] io scheduler deadline registered (default)
- [ 0.308139] io scheduler cfq registered
- [ 0.310632] BCM2708FB: allocated DMA memory 5b800000
- [ 0.310917] BCM2708FB: allocated DMA channel 0 @ f2007000
- [ 0.328709] Console: switching to colour frame buffer device 160x64
- [ 0.342404] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- [ 0.344735] 20215040.uart: ttyS0 at MMIO 0x20215040 (irq = 29, base_baud = 31250000) is a 16550
- [ 0.346552] vc-cma: Videocore CMA driver
- [ 0.346692] vc-cma: vc_cma_base = 0x00000000
- [ 0.346808] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
- [ 0.346931] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
- [ 0.347381] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
- [ 0.367972] brd: module loaded
- [ 0.377835] loop: module loaded
- [ 0.379131] vchiq: vchiq_init_state: slot_zero = 0xdb880000, is_master = 0
- [ 0.381415] Loading iSCSI transport class v2.0-870.
- [ 0.382976] usbcore: registered new interface driver smsc95xx
- [ 0.383264] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 0.584105] Core Release: 2.80a
- [ 0.584236] Setting default values for core params
- [ 0.584389] Finished setting default values for core params
- [ 0.784751] Using Buffer DMA mode
- [ 0.784873] Periodic Transfer Interrupt Enhancement - disabled
- [ 0.785010] Multiprocessor Interrupt Enhancement - disabled
- [ 0.785139] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 0.785324] Dedicated Tx FIFOs mode
- [ 0.785897] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xdb814000 dma = 0x5b814000 len=9024
- [ 0.786139] FIQ FSM acceleration enabled for :
- Non-periodic Split Transactions
- Periodic Split Transactions
- High-Speed Isochronous Endpoints
- [ 0.786476] dwc_otg: Microframe scheduler enabled
- [ 0.786571] WARN::hcd_init_fiq:412: FIQ on core 0 at 0xc03ddb20
- [ 0.786718] WARN::hcd_init_fiq:413: FIQ ASM at 0xc03dddfc length 36
- [ 0.786871] WARN::hcd_init_fiq:438: MPHI regs_base at 0xdc896000
- [ 0.792053] dwc_otg 20980000.usb: DWC OTG Controller
- [ 0.797163] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
- [ 0.802394] dwc_otg 20980000.usb: irq 32, io mem 0x00000000
- [ 0.807437] Init: Port Power? op_state=1
- [ 0.812487] Init: Power Port (0)
- [ 0.817881] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.823000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.827983] usb usb1: Product: DWC OTG Controller
- [ 0.832991] usb usb1: Manufacturer: Linux 4.1.21+ dwc_otg_hcd
- [ 0.837960] usb usb1: SerialNumber: 20980000.usb
- [ 0.844079] hub 1-0:1.0: USB hub found
- [ 0.849290] hub 1-0:1.0: 1 port detected
- [ 0.855083] dwc_otg: FIQ enabled
- [ 0.855109] dwc_otg: NAK holdoff enabled
- [ 0.855122] dwc_otg: FIQ split-transaction FSM enabled
- [ 0.855186] Module dwc_common_port init
- [ 0.855751] usbcore: registered new interface driver usb-storage
- [ 0.861414] mousedev: PS/2 mouse device common for all mice
- [ 0.867622] bcm2835-cpufreq: min=700000 max=700000
- [ 0.873209] sdhci: Secure Digital Host Controller Interface driver
- [ 0.878206] sdhci: Copyright(c) Pierre Ossman
- [ 0.883928] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
- [ 0.888926] mmc-bcm2835 20300000.mmc: DMA channel allocated
- [ 0.931135] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.936757] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.942240] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.954327] usbcore: registered new interface driver usbhid
- [ 0.960354] usbhid: USB HID core driver
- [ 0.969199] Initializing XFRM netlink socket
- [ 0.976393] NET: Registered protocol family 17
- [ 0.983740] Key type dns_resolver registered
- [ 1.001476] registered taskstats version 1
- [ 1.006931] vc-sm: Videocore shared memory driver
- [ 1.011924] [vc_sm_connected_init]: start
- [ 1.017786] [vc_sm_connected_init]: end - returning 0
- [ 1.025049] Waiting for root device /dev/mmcblk0p2...
- [ 1.042338] mmc0: MAN_BKOPS_EN bit is not set
- [ 1.049092] mmc0: new high speed MMC card at address 0001
- [ 1.054177] Indeed it is in host mode hprt0 = 00021501
- [ 1.119861] mmcblk0: mmc0:0001 4FEACB 3.64 GiB
- [ 1.125320] mmcblk0boot0: mmc0:0001 4FEACB partition 1 4.00 MiB
- [ 1.130641] mmcblk0boot1: mmc0:0001 4FEACB partition 2 4.00 MiB
- [ 1.136036] mmcblk0rpmb: mmc0:0001 4FEACB partition 3 512 KiB
- [ 1.142710] mmcblk0: p1 p2
- [ 1.254555] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.259592] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 1.264600] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 1.269881] Indeed it is in host mode hprt0 = 00001101
- [ 1.335925] devtmpfs: mounted
- [ 1.342127] Freeing unused kernel memory: 348K (c0771000 - c07c8000)
- [ 1.473878] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
- [ 1.478956] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 1.483935] usb 1-1: Product: USB2.0 Hub
- [ 1.504491] hub 1-1:1.0: USB hub found
- [ 1.511111] hub 1-1:1.0: 4 ports detected
- [ 1.622086] random: nonblocking pool is initialized
- [ 1.742763] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
- [ 1.748535] systemd[1]: Detected architecture 'arm'.
- [ 1.810811] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- [ 1.911385] usb 1-1.1: New USB device found, idVendor=0424, idProduct=9512
- [ 1.916603] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.932726] hub 1-1.1:1.0: USB hub found
- [ 1.938078] hub 1-1.1:1.0: 3 ports detected
- [ 1.949852] NET: Registered protocol family 10
- [ 1.959040] systemd[1]: Inserted module 'ipv6'
- [ 1.968362] systemd[1]: Set hostname to <raspberrypi>.
- [ 2.030804] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
- [ 2.174761] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6015
- [ 2.179992] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.185064] usb 1-1.2: Product: FT230X Basic UART
- [ 2.190047] usb 1-1.2: Manufacturer: FTDI
- [ 2.195080] usb 1-1.2: SerialNumber: DN01VIXF
- [ 2.230858] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg
- [ 2.351578] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 2.356761] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.373443] smsc95xx v1.0.4
- [ 2.440800] usb 1-1.3: new high-speed USB device number 6 using dwc_otg
- [ 2.459246] smsc95xx 1-1.1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f7:2a:8a
- [ 2.547698] usb 1-1.3: New USB device found, idVendor=0424, idProduct=2240
- [ 2.553227] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.558464] usb 1-1.3: Product: Ultra Fast Media
- [ 2.563721] usb 1-1.3: Manufacturer: Generic
- [ 2.568891] usb 1-1.3: SerialNumber: 000000225001
- [ 2.581906] usb-storage 1-1.3:1.0: USB Mass Storage device detected
- [ 2.595613] scsi host0: usb-storage 1-1.3:1.0
- [ 2.785358] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
- [ 2.802829] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- [ 2.809496] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 2.815626] systemd[1]: Starting Remote File Systems (Pre).
- [ 2.828633] systemd[1]: Reached target Remote File Systems (Pre).
- [ 2.834949] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
- [ 2.848851] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 2.855257] systemd[1]: Starting Encrypted Volumes.
- [ 2.868481] systemd[1]: Reached target Encrypted Volumes.
- [ 2.874861] systemd[1]: Starting Swap.
- [ 2.888014] systemd[1]: Reached target Swap.
- [ 2.894241] systemd[1]: Expecting device dev-mmcblk0p1.device...
- [ 2.907182] systemd[1]: Starting Root Slice.
- [ 2.920431] systemd[1]: Created slice Root Slice.
- [ 2.926667] systemd[1]: Starting User and Session Slice.
- [ 2.940002] systemd[1]: Created slice User and Session Slice.
- [ 2.946222] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- [ 2.959694] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 2.965912] systemd[1]: Starting Delayed Shutdown Socket.
- [ 2.978938] systemd[1]: Listening on Delayed Shutdown Socket.
- [ 2.985082] systemd[1]: Starting Journal Socket (/dev/log).
- [ 2.998313] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 3.004525] systemd[1]: Starting udev Control Socket.
- [ 3.017788] systemd[1]: Listening on udev Control Socket.
- [ 3.024019] systemd[1]: Starting udev Kernel Socket.
- [ 3.037147] systemd[1]: Listening on udev Kernel Socket.
- [ 3.043383] systemd[1]: Starting Journal Socket.
- [ 3.056696] systemd[1]: Listening on Journal Socket.
- [ 3.063032] systemd[1]: Starting System Slice.
- [ 3.076384] systemd[1]: Created slice System Slice.
- [ 3.082750] systemd[1]: Starting File System Check on Root Device...
- [ 3.100619] systemd[1]: Starting system-systemd\x2dfsck.slice.
- [ 3.150076] systemd[1]: Created slice system-systemd\x2dfsck.slice.
- [ 3.160382] systemd[1]: Starting system-getty.slice.
- [ 3.214698] systemd[1]: Created slice system-getty.slice.
- [ 3.226361] systemd[1]: Starting Increase datagram queue length...
- [ 3.308569] systemd[1]: Mounted Huge Pages File System.
- [ 3.339100] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 3.456607] systemd[1]: Started Set Up Additional Binary Formats.
- [ 3.487104] systemd[1]: Starting udev Coldplug all Devices...
- [ 3.544598] systemd[1]: Starting Load Kernel Modules...
- [ 3.576950] systemd[1]: Mounting Debug File System...
- [ 3.602293] scsi 0:0:0:0: Direct-Access Generic Ultra HS-COMBO 1.98 PQ: 0 ANSI: 0
- [ 3.611857] sd 0:0:0:0: [sda] Attached SCSI removable disk
- [ 3.670463] systemd[1]: Mounting POSIX Message Queue File System...
- [ 3.706259] fuse init (API version 7.23)
- [ 3.749331] bcm2708_i2c 20804000.i2c: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
- [ 3.767107] systemd[1]: Starting Slices.
- [ 3.776761] i2c /dev entries driver
- [ 3.814017] rtc-ds1307 1-0068: rtc core: registered ds1307 as rtc0
- [ 3.819754] rtc-ds1307 1-0068: 56 bytes nvram
- [ 3.869612] systemd[1]: Reached target Slices.
- [ 3.897321] systemd[1]: Mounted Debug File System.
- [ 3.920507] systemd[1]: Mounted POSIX Message Queue File System.
- [ 3.935931] systemd[1]: Started File System Check on Root Device.
- [ 3.966937] systemd[1]: Started Increase datagram queue length.
- [ 3.982199] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 4.012844] systemd[1]: Started Load Kernel Modules.
- [ 4.247300] systemd[1]: Started udev Coldplug all Devices.
- [ 4.372798] systemd[1]: Mounting Configuration File System...
- [ 4.390500] systemd[1]: Starting Apply Kernel Variables...
- [ 4.432495] systemd[1]: Mounting FUSE Control File System...
- [ 4.476185] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 4.526161] systemd[1]: Starting Syslog Socket.
- [ 4.561010] systemd[1]: Listening on Syslog Socket.
- [ 4.561355] systemd[1]: Starting Journal Service...
- [ 4.637468] systemd[1]: Started Journal Service.
- [ 5.131132] systemd-udevd[90]: starting version 215
- [ 5.670993] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 7.120018] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- [ 8.460938] bcm2835-rng 20104000.rng: hwrng registered
- [ 9.094403] usbcore: registered new interface driver usbserial
- [ 9.094572] usbcore: registered new interface driver usbserial_generic
- [ 9.094717] usbserial: USB Serial support registered for generic
- [ 9.169932] usbcore: registered new interface driver ftdi_sio
- [ 9.170122] usbserial: USB Serial support registered for FTDI USB Serial Device
- [ 9.170619] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
- [ 9.261479] usb 1-1.2: Detected FT-X
- [ 9.291231] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
- [ 11.080380] systemd-journald[88]: Received request to flush runtime journal from PID 1
- [ 11.937252] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
- [ 13.873372] cfg80211: Calling CRDA to update world regulatory domain
- [ 14.234724] cfg80211: World regulatory domain updated:
- [ 14.234772] cfg80211: DFS Master region: unset
- [ 14.234788] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 14.234812] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 14.234829] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 14.234846] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 14.234868] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 14.234888] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 14.234908] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 14.234925] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 14.234942] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 15.507901] Adding 102396k swap on /var/swap. Priority:-1 extents:2 across:110588k SSFS
- [ 16.164143] smsc95xx 1-1.1.1:1.0 eth0: hardware isn't capable of remote wakeup
- [ 16.169572] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 17.697136] smsc95xx 1-1.1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
- [ 17.704033] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 33.396177] gpiomem-bcm2835 20200000.gpiomem: gpiomem device opened.
- [ 536.508308] gpiomem-bcm2835 20200000.gpiomem: gpiomem device opened.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement